Revert "vexpress64: fvp dram: add DRAM configuration"

This reverts commit fc04b923 where the
FVP DRAM configuration was added.
Signed-off-by: NRyan Harkin <ryan.harkin@linaro.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NSudeep Holla <sudeep.holla@arm.com>

arch/arm/Kconfig

@@ -1066,16 +1066,6 @@ config TARGET_VEXPRESS64_BASE_FVP
 	select PL01X_SERIAL
 	select SEMIHOSTING
 
-config TARGET_VEXPRESS64_BASE_FVP_DRAM
-	bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
-	select ARM64
-	select PL01X_SERIAL
-	help
-	  This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
-	  the default config to allow the user to load the images directly into
-	  DRAM using model parameters rather than by using semi-hosting to load
-	  the files from the host filesystem.
-
 config TARGET_VEXPRESS64_JUNO
 	bool "Support Versatile Express Juno Development Platform"
 	select ARM64

board/armltd/vexpress64/Kconfig

-if TARGET_VEXPRESS64_BASE_FVP || TARGET_VEXPRESS64_JUNO || TARGET_VEXPRESS64_BASE_FVP_DRAM
+if TARGET_VEXPRESS64_BASE_FVP || TARGET_VEXPRESS64_JUNO
 
 config SYS_BOARD
 	default "vexpress64"

board/armltd/vexpress64/MAINTAINERS

@@ -10,11 +10,6 @@ M:	Linus Walleij <linus.walleij@linaro.org>
 S:	Maintained
 F:	configs/vexpress_aemv8a_semi_defconfig
 
-VEXPRESS_AEMV8A_DRAM BOARD
-M:	Ryan Harkin <ryan.harkin@linaro.org>
-S:	Maintained
-F:	configs/vexpress_aemv8a_dram_defconfig
-
 JUNO DEVELOPMENT PLATFORM BOARD
 M:	Linus Walleij <linus.walleij@linaro.org>
 S:	Maintained

configs/vexpress_aemv8a_dram_defconfig

-CONFIG_ARM=y
-CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM=y
-CONFIG_SYS_TEXT_BASE=0x88000000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_IDENT_STRING=" vexpress_aemv8a"
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTDELAY=1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyAMA0 earlycon=pl011,0x1c090000 debug user_debug=31 androidboot.hardware=fvpbase root=/dev/vda2 rw rootwait loglevel=9"
-# CONFIG_USE_BOOTCOMMAND is not set
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_SYS_PROMPT="VExpress64# "
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_ARMFLASH=y
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_CACHE=y
-# CONFIG_CMD_MISC is not set
-CONFIG_CMD_UBI=y
-# CONFIG_ISO_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_DM=y
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_MTD_DEVICE=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_SERIAL=y
-CONFIG_OF_LIBFDT=y

include/configs/vexpress_aemv8a.h

@@ -16,8 +16,7 @@
 #define CONFIG_REMAKE_ELF
 
 /* Link Definitions */
-#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \
-	defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
+#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
 /* ATF loads u-boot here for BASE_FVP model */
 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
 #elif CONFIG_TARGET_VEXPRESS64_JUNO
@@ -83,8 +82,7 @@
 #define GICR_BASE			(0x2f100000)
 #else
 
-#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \
-	defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
+#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
 #define GICD_BASE			(0x2f000000)
 #define GICC_BASE			(0x2c000000)
 #elif CONFIG_TARGET_VEXPRESS64_JUNO
@@ -191,17 +189,6 @@
 				"booti $kernel_addr - $fdt_addr"
 
 
-#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM
-#define CONFIG_EXTRA_ENV_SETTINGS	\
-				"kernel_addr=0x80080000\0"	\
-				"initrd_addr=0x84000000\0"	\
-				"fdt_addr=0x83000000\0"		\
-				"fdt_high=0xffffffffffffffff\0"	\
-				"initrd_high=0xffffffffffffffff\0"
-
-#define CONFIG_BOOTCOMMAND	"booti $kernel_addr $initrd_addr $fdt_addr"
-
-
 #endif
 
 /* Monitor Command Prompt */