Coding Style cleanup

Signed-off-by: NWolfgang Denk <wd@denx.de>

arch/arm/cpu/arm926ejs/kirkwood/dram.c

@@ -93,4 +93,3 @@ void dram_init_banksize(void)
 	dram_init();
 }
 #endif /* CONFIG_SYS_BOARD_DRAM_INIT */
-

arch/arm/cpu/pxa/cpu.c

@@ -312,7 +312,7 @@ void pxa_wakeup(void)
 int arch_cpu_init(void)
 {
 	pxa_gpio_setup();
-//	pxa_wait_ticks(0x8000);
+/*	pxa_wait_ticks(0x8000); */
 	pxa_wakeup();
 	pxa_interrupt_setup();
 	pxa_clock_setup();

board/bct-brettl2/cled.c

@@ -13,7 +13,7 @@
 
 int do_cled(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	ulong addr = 0x20000000 + 0x200000; // AMS2
+	ulong addr = 0x20000000 + 0x200000; /* AMS2 */
 	uchar data;
 
 	if (argc < 2)

board/davedenx/qong/fpga.c

@@ -92,4 +92,3 @@ int qong_fpga_init(void)
 }
 
 #endif
-

board/isee/igep0030/config.mk

@@ -31,4 +31,3 @@
 
 # For use with external or internal boots.
 TEXT_BASE = 0x80008000
-

board/xes/common/fsl_8xxx_misc.c

@@ -58,5 +58,3 @@ uint get_board_derivative(void)
 	*/
        return gur->gpporcr >> 28;
 }
-
-

board/xes/xpedite550x/ddr.c

@@ -162,4 +162,3 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	popts->rtt_override = 1;
 	popts->rtt_override_value = 3;
 }
-

drivers/fpga/lattice.c

@@ -395,5 +395,3 @@ int lattice_info(Lattice_desc *desc)
 
 	return ret_val;
 }
-
-

drivers/mmc/omap_hsmmc.c

@@ -412,4 +412,3 @@ int omap_mmc_init(int dev_index)
 
 	return 0;
 }
-

drivers/serial/atmel_usart.h

@@ -42,7 +42,7 @@ typedef struct atmel_usart3 {
 	u32	reserved1;
 	u32	ifr;
 	u32	man;
-	u32	reserved2[54]; // version and PDC not needed
+	u32	reserved2[54]; /* version and PDC not needed */
 } atmel_usart3_t;
 
 /* Bitfields in CR */

drivers/usb/gadget/config.c

@@ -116,4 +116,3 @@ int usb_gadget_config_buf(
 	cp->bmAttributes |= USB_CONFIG_ATT_ONE;
 	return len;
 }
-

drivers/usb/gadget/epautoconf.c

@@ -302,4 +302,3 @@ void usb_ep_autoconfig_reset(struct usb_gadget *gadget)
 #endif
 	epnum = 0;
 }
-

drivers/usb/gadget/ether.c

@@ -1968,4 +1968,3 @@ fail:
 	error("%s failed. error = %d", __func__, status);
 	return status;
 }
-

drivers/usb/gadget/usbstring.c

@@ -137,4 +137,3 @@ usb_gadget_get_string(struct usb_gadget_strings *table, int id, u8 *buf)
 	buf[1] = USB_DT_STRING;
 	return buf[0];
 }
-

include/configs/mx1ads.h

@@ -60,8 +60,6 @@
 
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
 
-
-
 /*
  *  CS8900 Ethernet drivers
  */
@@ -79,7 +77,6 @@
 
 #define CONFIG_BAUDRATE		115200
 
-
 /*
  * BOOTP options
  */
@@ -88,7 +85,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
@@ -98,7 +94,6 @@
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_ELF
 
-
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTARGS		"root=/dev/msdk mem=48M"
 #define CONFIG_BOOTFILE		"mx1ads"

include/configs/mx1fs2.h

@@ -34,7 +34,6 @@
 #undef	_CONFIG_UART4 /* internal uart 4 */
 #undef	CONFIG_SILENT_CONSOLE  /* use this to disable output */
 
-
 /*
  * BOOTP options
  */
@@ -43,7 +42,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
@@ -58,7 +56,6 @@
 #undef CONFIG_CMD_PING
 #undef CONFIG_CMD_SOURCE
 
-
 /*
  * Boot options. Setting delay to -1 stops autostart count down.
  */
@@ -98,8 +95,6 @@
  */
 #define CONFIG_SYS_MALLOC_LEN	  (CONFIG_ENV_SIZE + (128<<10) )
 
-
-
 #define CONFIG_STACKSIZE	(120<<10)      /* stack size */
 
 #ifdef CONFIG_USE_IRQ

include/configs/scb9328.h

@@ -35,7 +35,6 @@
  * Select serial console configuration
  */
 
-
 /*
  * BOOTP options
  */
@@ -44,7 +43,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
@@ -58,7 +56,6 @@
 #undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_SOURCE
 
-
 /*
  * Boot options. Setting delay to -1 stops autostart count down.
  * NOTE: Sending parameters to kernel depends on kernel version and
@@ -100,14 +97,11 @@
 #define CONFIG_INITRD_TAG	     1	 /* send initrd params		     */
 #undef	CONFIG_VFD			 /* do not send framebuffer setup    */
 
-
 /*
  * Malloc pool need to host env + 128 Kb reserve for other allocations.
  */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128<<10) )
 
-
-
 #define CONFIG_STACKSIZE	(120<<10)      /* stack size		     */
 
 #ifdef CONFIG_USE_IRQ
@@ -133,15 +127,6 @@
 #define SCB9328_SDRAM_1		0x08000000	/* SDRAM bank #1	   */
 #define SCB9328_SDRAM_1_SIZE	0x01000000	/* 16 MB		   */
 
-/*
- * Flash Controller settings
- */
-
-/*
- * Hardware drivers
- */
-
-
 /*
  * Configuration for FLASH memory for the Synertronixx board
  */

include/lattice.h

@@ -317,4 +317,3 @@ void writePort(unsigned char pins, unsigned char value);
 unsigned char readPort(void);
 void sclock(void);
 #endif
-

include/linux/fb.h

@@ -518,14 +518,14 @@ struct fb_info {
 #define FBINFO_FLAG_MODULE	FBINFO_MODULE
 #define FBINFO_FLAG_DEFAULT	FBINFO_DEFAULT
 
-// This will go away
+/* This will go away */
 #if defined(__sparc__)
 
 /* We map all of our framebuffers such that big-endian accesses
  * are what we want, so the following is sufficient.
  */
 
-// This will go away
+/* This will go away */
 #define fb_readb sbus_readb
 #define fb_readw sbus_readw
 #define fb_readl sbus_readl

include/linux/usb/cdc.h

@@ -9,8 +9,6 @@
  *                      Remy Bohmer <linux@bohmer.net>
  */
 
-
-
 #define USB_CDC_SUBCLASS_ACM			0x02
 #define USB_CDC_SUBCLASS_ETHERNET		0x06
 #define USB_CDC_SUBCLASS_WHCM			0x08
@@ -199,7 +197,6 @@ struct usb_cdc_line_coding {
 #define	USB_CDC_PACKET_TYPE_BROADCAST		(1 << 3)
 #define	USB_CDC_PACKET_TYPE_MULTICAST		(1 << 4) /* filtered */
 
-
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -221,4 +218,3 @@ struct usb_cdc_notification {
 	__le16	wIndex;
 	__le16	wLength;
 } __attribute__ ((packed));
-

post/board/lwmon5/fpga.c

@@ -227,8 +227,6 @@ static int fpga_mem_test(void)
 	return ret;
 }
 
-
-
 /* Verify FPGA addresslines */
 static int fpga_post_addrline(ulong *address, ulong *base, ulong size)
 {