- 23 10月, 2013 9 次提交
-
-
由 Sebastian Reichel 提交于
Add regulator names and voltage information to the Nokia N900 DTS file. Signed-off-by: NSebastian Reichel <sre@debian.org> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Sebastian Reichel 提交于
The twl4030.dtsi is missing some regulators. This patch adds the missing ones and orders the regulators alphabetically. Signed-off-by: NSebastian Reichel <sre@debian.org> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Sebastian Reichel 提交于
Add support for LP5523 device. Signed-off-by: NSebastian Reichel <sre@debian.org> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Sebastian Reichel 提交于
Add support for Nokia N900's vibrator. Signed-off-by: NSebastian Reichel <sre@debian.org> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Sebastian Reichel 提交于
Add device tree node for the GPIO keys provided by the N900 board. This is a simple conversion of the existing board code. Signed-off-by: NSebastian Reichel <sre@debian.org> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Sebastian Reichel 提交于
Add support for external SD card slot. Signed-off-by: NSebastian Reichel <sre@debian.org> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Sebastian Reichel 提交于
Add UART support to Nokia N900. Signed-off-by: NSebastian Reichel <sre@debian.org> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Sebastian Reichel 提交于
Fix the bus speed of i2c bus 2 and 3. Signed-off-by: NSebastian Reichel <sre@debian.org> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Sebastian Reichel 提交于
Add pin muxing support for the Nokia N900 i2c controllers. Signed-off-by: NSebastian Reichel <sre@debian.org> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
- 22 10月, 2013 11 次提交
-
-
由 J Keerthy 提交于
Add DT OPP table for DRA7xx family of devices. This data is decoded by OF with of_init_opp_table() helper function. The data is based on DRA75x, DRA74x Data Manual revision F (Sept 2013). TODO: add OPP_HIGH after AVS-Class0 is functional NOTE: The voltage and frequency values work well only on NOM samples and it is mandatory to use ABB/AVS Class 0 support for all OPPs. Clock nodes are pending clock node alignment. [nm@ti.com: cleanups and rebase to latest] Signed-off-by: NNishanth Menon <nm@ti.com> Signed-off-by: NJ Keerthy <j-keerthy@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 J Keerthy 提交于
Add DT OPP table for OMAP54xx family of devices. This data is decoded by OF with of_init_opp_table() helper function. The data is based on OMAP543x ES2.0 DM Operating Condition Addendum Version 0.6(April 2013) NOTE: The voltage and frequency values work well only on NOM samples and are supposed to work properly only with ABB/AVS for ALL OPPs. TODO: Add SPEED BIN OPP after ABB and AVS support so the cpufreq works on all samples seamlessly. Clock node is pending alignment for clock dts conversion [nm@ti.com: sync to latest and fixes] Signed-off-by: NNishanth Menon <nm@ti.com> Signed-off-by: NJ Keerthy <j-keerthy@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 J Keerthy 提交于
regulator smps123 supply from Palmas PMIC powers CPU0 on DRA7 EVM. [nm@ti.com: rebase to latest] Signed-off-by: NNishanth Menon <nm@ti.com> Signed-off-by: NJ Keerthy <j-keerthy@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Nishanth Menon 提交于
regulator smps123 supply from Palmas PMIC powers CPU0 on OMAP5uEVM. Based on a patch by J Keerthy <j-keerthy@ti.com> Signed-off-by: NNishanth Menon <nm@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Eric Witcher 提交于
Correct mcspi pin descriptions to match corresponding node name and add chip select number to be consistent with OMAP5 TRM. Signed-off-by: NEric Witcher <ewitcher@mindspring.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Markus Pargmann 提交于
Control module is not usb specific. Changes the label to usb_ctrl_mod. Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Mark Jackson 提交于
NanoBone Specification: ----------------------- CPU: TI AM335x Memory: 256MB DDR3 128MB NOR flash 128KB FRAM Ethernet: 2 x 10/100 connected to SMSC LAN8710 PHY USB: 1 x USB2.0 Type A I2C: 2Kbit EEPROM (Microchip 24AA02) RTC (Maxim DS1338) GPIO Expander (Microchip MCP23017) Expansion connector: 6 x UART 1 x MMC/SD 1 x USB2.0 Signed-off-by: NMark Jackson <mpfj@newflow.co.uk> Reviewed-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Nishanth Menon 提交于
Provide alias to allow ordering the i2c devices correctly. Signed-off-by: NNishanth Menon <nm@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Nishanth Menon 提交于
Currently, on OMAP5, i2c1 and i2c5 defer probe due to pinctrl dependencies. This changes the i2c ID each bus is registered with in i2c-dev interface. As a result of this, many userspace tools break and there is no consistent manner to fix the same if the i2c dev interface have no consistent numbering. Since this could happen for other OMAP derivatives, provide i2c alias for all OMAP3+ SoCs to allow ordering the i2c devices correctly. Signed-off-by: NNishanth Menon <nm@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Enric Balletbo i Serra 提交于
Add mmc1 dt node to IGEP COM AQUILA board. Signed-off-by: NEnric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Peter Ujfalusi 提交于
Add nodes for McASP0 and McASP1 for AM43xx. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
- 21 10月, 2013 14 次提交
-
-
由 Roger Quadros 提交于
The generic PHY framewrok expects different properties than the old USB PHY framework. Supply those properties. Fixes USB OTG port on beagle after the Generic PHY framework was merged in greg/usb-next. [1] [1] - https://lkml.org/lkml/2013/9/27/581Signed-off-by: NRoger Quadros <rogerq@ti.com> Acked-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Peter Ujfalusi 提交于
AM335x EVM-SK have only support for audio playback (stereo jack on the board) via tlv320aic3106 codec connected to McASP1. Enable the support for audio playback on the board: - McASP1 configuration - tlv320aic3106 configuration - Machine driver. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NJyri Sarha <jsarha@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Darren Etheridge 提交于
Adds sound, tlv320aic3106, mcasp1, and am335x_evm_audio_pin nodes. Signed-off-by: NDarren Etheridge <detheridge@ti.com> Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NJyri Sarha <jsarha@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Jyri Sarha 提交于
This patch adds a second tuple to reg property. The new property tuple describes the memory location for data port registers mapped trough L3 bus on am33xx. The both property tuples are named accordingly in the reg-names property. Signed-off-by: NHebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: NDarren Etheridge <detheridge@ti.com> Signed-off-by: NJyri Sarha <jsarha@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Pantelis Antoniou 提交于
Add missing mcasp entries in the am33xx.dtsi include file. Signed-off-by: NPantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: NDarren Etheridge <detheridge@ti.com> Signed-off-by: NJyri Sarha <jsarha@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Mugunthan V N 提交于
-> Adding pinmux for cpsw, i2c0. -> Enabling the modules that are present in AM4372 EPOS EVM These modules are tested on AM4372 EPOS EVM. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NSourav Poddar <sourav.poddar@ti.com> Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Lokesh Vutla 提交于
Populate nodes for l2-cache-controller, EDMA, mailbox, mmc, sham. Update as well DT properties for epwmss, aes, des. Signed-off-by: NSuman Anna <s-anna@ti.com> Signed-off-by: NBalaji T K <balajitk@ti.com> Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 George Cherian 提交于
Added dr_mode property in dwc3 and set its default mode to device. Signed-off-by: NGeorge Cherian <george.cherian@ti.com> Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Kishon Vijay Abraham I 提交于
smps10 should be enabled only in the case of host mode. So stop doing always_on, boot_on from smps10_out1. The driver will enable it in host mode. Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com> Acked-by: NNishanth Menon <nm@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Nishanth Menon 提交于
Do not reset GPIO1 at boot-up because GPIO 7 in GPIO1 block is used on OMAP4460 PandaBoard-ES to select voltage register in TPS62361 which supplies VDD_MPU. Without this, OMAP4460 PandaBoard-ES boards fail to boot-up because MPU voltage switches over to VSET0 voltage value (boot voltage) which is not sufficient to operate the device at OPP100. Signed-off-by: NNishanth Menon <nm@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Rajendra Nayak 提交于
Do not reset GPIO0 at boot-up because GPIO0 is used on AM335x EVM-SK to control VTT regulators on DDR3. Without this EVM-SK boards fail to boot-up because of DDR3 corruption. Signed-off-by: NRajendra Nayak <rnayak@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Rajendra Nayak 提交于
On OMAP we have co-processor IPs, memory controllers, GPIOs which control regulators and power switches to PMIC, and SoC internal Bus IPs, some or most of which should either not be reset or idled or both at init. (In some cases there are erratas which prevent an IP from being reset) Have a way to pass this information from DT. Update the am33xx/omap4 and omap5 dtsi files with the new bindings for modules which either should not be idled. reset or both. A later patch would cleanup the same information that exists today as part of the hwmod data files. Signed-off-by: NRajendra Nayak <rnayak@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Roger Quadros 提交于
The generic PHY framewrok expects different properties than the old USB PHY framework. Supply those properties. Fixes USB OTG port on GAT04 and N900 after the Generic PHY framework was merged in greg/usb-next. [1] [1] - https://lkml.org/lkml/2013/9/27/581Signed-off-by: NRoger Quadros <rogerq@ti.com> Acked-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Sricharan R 提交于
The arm arch timers frequency are now programmed in the CNTFREQ per-cpu register by the timer code using the secure API [1]. So remove the redundant entry from the dts. [1] http://marc.info/?l=linux-omap&m=138139106312786&w=2Signed-off-by: NSricharan R <r.sricharan@ti.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
- 12 10月, 2013 6 次提交
-
-
由 Balaji T K 提交于
Add mmc2 dt node to dra7-evm board and model eMMC vcc as fixed regulator. Signed-off-by: NBalaji T K <balajitk@ti.com> Acked-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Balaji T K 提交于
Add mmc1 dt node to dra7-evm board. Input for ldo1 regulator is controlled by gpio 5 of pcf8575 chip (0x21) on i2c1 bus. When dt support for gpio-pcf857x is available, input supply will be modelled as cascaded regulator. Signed-off-by: NBalaji T K <balajitk@ti.com> Acked-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Nishanth Menon 提交于
This allows the palmas pm_power_off to kick in on power off command and switch off the board. Signed-off-by: NNishanth Menon <nm@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Javier Martinez Canillas 提交于
Commit 840ef8b7 ("ARM: dt: add header to define IRQ flags") added constants for IRQ edge/level triggered types so use it instead of a magic number to enhance the DT readability. Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Javier Martinez Canillas 提交于
Add device nodes for the HS USB Host port 1, USB PHY and its required regulator and also pin mux setup for HS USB1 pins. Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: NEnric Balletbo i Serra <eballetbo@gmail.com> Acked-by: NRoger Quadros <rogerq@ti.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-
由 Javier Martinez Canillas 提交于
Commit ad871c10 ("ARM: dts: OMAP: Add usb_otg and glue data to O added USB OTG support for most OMAP boards but some OMAP3 boards such as IGEP boards were not updated. This patch adds an USB OTG device node to these board. Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: NEnric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
-