提交 e4b9b9f3 编写于 作者: J Jon Hunter 提交者: Benoit Cousson

ARM: dts: OMAP2+: Identify GPIO banks that are always powered

Add the "ti,gpio-always-on" property to the appropriate GPIO banks to
indicate which banks are always powered and will never lose logic state.
Signed-off-by: NJon Hunter <jon-hunter@ti.com>
Signed-off-by: NBenoit Cousson <benoit.cousson@linaro.org>
上级 d1c6ccfe
......@@ -34,6 +34,7 @@
reg = <0x48018000 0x200>;
interrupts = <29>;
ti,hwmods = "gpio1";
ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
......@@ -45,6 +46,7 @@
reg = <0x4801a000 0x200>;
interrupts = <30>;
ti,hwmods = "gpio2";
ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
......@@ -56,6 +58,7 @@
reg = <0x4801c000 0x200>;
interrupts = <31>;
ti,hwmods = "gpio3";
ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
......@@ -67,6 +70,7 @@
reg = <0x4801e000 0x200>;
interrupts = <32>;
ti,hwmods = "gpio4";
ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
......
......@@ -34,6 +34,7 @@
reg = <0x4900c000 0x200>;
interrupts = <29>;
ti,hwmods = "gpio1";
ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
......@@ -45,6 +46,7 @@
reg = <0x4900e000 0x200>;
interrupts = <30>;
ti,hwmods = "gpio2";
ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
......@@ -56,6 +58,7 @@
reg = <0x49010000 0x200>;
interrupts = <31>;
ti,hwmods = "gpio3";
ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
......@@ -67,6 +70,7 @@
reg = <0x49012000 0x200>;
interrupts = <32>;
ti,hwmods = "gpio4";
ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
......
......@@ -116,6 +116,7 @@
reg = <0x48310000 0x200>;
interrupts = <29>;
ti,hwmods = "gpio1";
ti,gpio-always-on;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
......
......@@ -140,6 +140,7 @@
reg = <0x4a310000 0x200>;
interrupts = <0 29 0x4>;
ti,hwmods = "gpio1";
ti,gpio-always-on;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
......
......@@ -133,6 +133,7 @@
reg = <0x4ae10000 0x200>;
interrupts = <0 29 0x4>;
ti,hwmods = "gpio1";
ti,gpio-always-on;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册