#! /usr/bin/perl use strict; use warnings; use POSIX; use File::Spec; use File::Copy; use OpenSSL::Test qw/:DEFAULT with bldtop_file srctop_file cmdstr/; use OpenSSL::Test::Utils; setup("test_ssl"); $ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf"); my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_srp, $no_psk, $no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2, $no_dtls, $no_dtls1, $no_dtls1_2, $no_ct) = anydisabled qw/rsa dsa dh ec srp psk ssl3 tls1 tls1_1 tls1_2 dtls dtls1 dtls1_2 ct/; my $no_anytls = alldisabled(available_protocols("tls")); my $no_anydtls = alldisabled(available_protocols("dtls")); plan skip_all => "No SSL/TLS/DTLS protocol is support by this OpenSSL build" if $no_anytls && $no_anydtls; my $digest = "-sha1"; my @reqcmd = ("openssl", "req"); my @x509cmd = ("openssl", "x509", $digest); my @verifycmd = ("openssl", "verify"); my $dummycnf = srctop_file("apps", "openssl.cnf"); my $CAkey = "keyCA.ss"; my $CAcert="certCA.ss"; my $CAserial="certCA.srl"; my $CAreq="reqCA.ss"; my $CAconf=srctop_file("test","CAss.cnf"); my $CAreq2="req2CA.ss"; # temp my $Uconf=srctop_file("test","Uss.cnf"); my $Ukey="keyU.ss"; my $Ureq="reqU.ss"; my $Ucert="certU.ss"; my $Dkey="keyD.ss"; my $Dreq="reqD.ss"; my $Dcert="certD.ss"; my $Ekey="keyE.ss"; my $Ereq="reqE.ss"; my $Ecert="certE.ss"; my $P1conf=srctop_file("test","P1ss.cnf"); my $P1key="keyP1.ss"; my $P1req="reqP1.ss"; my $P1cert="certP1.ss"; my $P1intermediate="tmp_intP1.ss"; my $P2conf=srctop_file("test","P2ss.cnf"); my $P2key="keyP2.ss"; my $P2req="reqP2.ss"; my $P2cert="certP2.ss"; my $P2intermediate="tmp_intP2.ss"; my $server_sess="server.ss"; my $client_sess="client.ss"; # ssltest_old.c is deprecated in favour of the new framework in ssl_test.c # If you're adding tests here, you probably want to convert them to the # new format in ssl_test.c and add recipes to 80-test_ssl_new.t instead. plan tests => 1 # For testss + 1 # For ssltest_old -test_cipherlist + 14 # For the first testssl + 16 # For the first testsslproxy + 16 # For the second testsslproxy ; subtest 'test_ss' => sub { if (testss()) { open OUT, ">", "intP1.ss"; copy($CAcert, \*OUT); copy($Ucert, \*OUT); close OUT; open OUT, ">", "intP2.ss"; copy($CAcert, \*OUT); copy($Ucert, \*OUT); copy($P1cert, \*OUT); close OUT; } }; my $check = ok(run(test(["ssltest_old","-test_cipherlist"])), "running ssltest_old"); SKIP: { skip "ssltest_old ended with error, skipping the rest", 3 if !$check; note('test_ssl -- key U'); testssl("keyU.ss", $Ucert, $CAcert); note('test_ssl -- key P1'); testsslproxy("keyP1.ss", "certP1.ss", "intP1.ss", "AB"); note('test_ssl -- key P2'); testsslproxy("keyP2.ss", "certP2.ss", "intP2.ss", "BC"); } # ----------- # subtest functions sub testss { open RND, ">>", ".rnd"; print RND "string to make the random number generator think it has entropy"; close RND; my @req_dsa = ("-newkey", "dsa:".srctop_file("apps", "dsa1024.pem")); my @req_new; if ($no_rsa) { @req_new = @req_dsa; } else { @req_new = ("-new"); } plan tests => 17; SKIP: { skip 'failure', 16 unless ok(run(app([@reqcmd, "-config", $CAconf, "-out", $CAreq, "-keyout", $CAkey, @req_new])), 'make cert request'); skip 'failure', 15 unless ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30", "-req", "-out", $CAcert, "-signkey", $CAkey, "-extfile", $CAconf, "-extensions", "v3_ca"], stdout => "err.ss")), 'convert request into self-signed cert'); skip 'failure', 14 unless ok(run(app([@x509cmd, "-in", $CAcert, "-x509toreq", "-signkey", $CAkey, "-out", $CAreq2], stdout => "err.ss")), 'convert cert into a cert request'); skip 'failure', 13 unless ok(run(app([@reqcmd, "-config", $dummycnf, "-verify", "-in", $CAreq, "-noout"])), 'verify request 1'); skip 'failure', 12 unless ok(run(app([@reqcmd, "-config", $dummycnf, "-verify", "-in", $CAreq2, "-noout"])), 'verify request 2'); skip 'failure', 11 unless ok(run(app([@verifycmd, "-CAfile", $CAcert, $CAcert])), 'verify signature'); skip 'failure', 10 unless ok(run(app([@reqcmd, "-config", $Uconf, "-out", $Ureq, "-keyout", $Ukey, @req_new], stdout => "err.ss")), 'make a user cert request'); skip 'failure', 9 unless ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30", "-req", "-out", $Ucert, "-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial, "-extfile", $Uconf, "-extensions", "v3_ee"], stdout => "err.ss")) && run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])), 'sign user cert request'); skip 'failure', 8 unless ok(run(app([@x509cmd, "-subject", "-issuer", "-startdate", "-enddate", "-noout", "-in", $Ucert])), 'Certificate details'); skip 'failure', 7 unless subtest 'DSA certificate creation' => sub { plan skip_all => "skipping DSA certificate creation" if $no_dsa; plan tests => 4; SKIP: { $ENV{CN2} = "DSA Certificate"; skip 'failure', 3 unless ok(run(app([@reqcmd, "-config", $Uconf, "-out", $Dreq, "-keyout", $Dkey, @req_dsa], stdout => "err.ss")), "make a DSA user cert request"); skip 'failure', 2 unless ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Dreq, "-days", "30", "-req", "-out", $Dcert, "-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial, "-extfile", $Uconf, "-extensions", "v3_ee_dsa"], stdout => "err.ss")), "sign DSA user cert request"); skip 'failure', 1 unless ok(run(app([@verifycmd, "-CAfile", $CAcert, $Dcert])), "verify DSA user cert"); skip 'failure', 0 unless ok(run(app([@x509cmd, "-subject", "-issuer", "-startdate", "-enddate", "-noout", "-in", $Dcert])), "DSA Certificate details"); } }; skip 'failure', 6 unless subtest 'ECDSA/ECDH certificate creation' => sub { plan skip_all => "skipping ECDSA/ECDH certificate creation" if $no_ec; plan tests => 5; SKIP: { $ENV{CN2} = "ECDSA Certificate"; skip 'failure', 4 unless ok(run(app(["openssl", "ecparam", "-name", "P-256", "-out", "ecp.ss"])), "make EC parameters"); skip 'failure', 3 unless ok(run(app([@reqcmd, "-config", $Uconf, "-out", $Ereq, "-keyout", $Ekey, "-newkey", "ec:ecp.ss"], stdout => "err.ss")), "make a ECDSA/ECDH user cert request"); skip 'failure', 2 unless ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ereq, "-days", "30", "-req", "-out", $Ecert, "-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial, "-extfile", $Uconf, "-extensions", "v3_ee_ec"], stdout => "err.ss")), "sign ECDSA/ECDH user cert request"); skip 'failure', 1 unless ok(run(app([@verifycmd, "-CAfile", $CAcert, $Ecert])), "verify ECDSA/ECDH user cert"); skip 'failure', 0 unless ok(run(app([@x509cmd, "-subject", "-issuer", "-startdate", "-enddate", "-noout", "-in", $Ecert])), "ECDSA Certificate details"); } }; skip 'failure', 5 unless ok(run(app([@reqcmd, "-config", $P1conf, "-out", $P1req, "-keyout", $P1key, @req_new], stdout => "err.ss")), 'make a proxy cert request'); skip 'failure', 4 unless ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30", "-req", "-out", $P1cert, "-CA", $Ucert, "-CAkey", $Ukey, "-extfile", $P1conf, "-extensions", "v3_proxy"], stdout => "err.ss")), 'sign proxy with user cert'); copy($Ucert, $P1intermediate); run(app([@verifycmd, "-CAfile", $CAcert, "-untrusted", $P1intermediate, $P1cert])); ok(run(app([@x509cmd, "-subject", "-issuer", "-startdate", "-enddate", "-noout", "-in", $P1cert])), 'Certificate details'); skip 'failure', 2 unless ok(run(app([@reqcmd, "-config", $P2conf, "-out", $P2req, "-keyout", $P2key, @req_new], stdout => "err.ss")), 'make another proxy cert request'); skip 'failure', 1 unless ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30", "-req", "-out", $P2cert, "-CA", $P1cert, "-CAkey", $P1key, "-extfile", $P2conf, "-extensions", "v3_proxy"], stdout => "err.ss")), 'sign second proxy cert request with the first proxy cert'); open OUT, ">", $P2intermediate; copy($Ucert, \*OUT); copy($P1cert, \*OUT); close OUT; run(app([@verifycmd, "-CAfile", $CAcert, "-untrusted", $P2intermediate, $P2cert])); ok(run(app([@x509cmd, "-subject", "-issuer", "-startdate", "-enddate", "-noout", "-in", $P2cert])), 'Certificate details'); } } sub testssl { my $key = shift || bldtop_file("apps","server.pem"); my $cert = shift || bldtop_file("apps","server.pem"); my $CAtmp = shift; my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs")); my @extra = @_; my @ssltest = ("ssltest_old", "-s_key", $key, "-s_cert", $cert, "-c_key", $key, "-c_cert", $cert); my $serverinfo = srctop_file("test","serverinfo.pem"); my $dsa_cert = 0; if (grep /DSA Public Key/, run(app(["openssl", "x509", "-in", $cert, "-text", "-noout"]), capture => 1)) { $dsa_cert = 1; } # plan tests => 11; subtest 'standard SSL tests' => sub { ###################################################################### plan tests => 29; SKIP: { skip "SSLv3 is not supported by this OpenSSL build", 4 if disabled("ssl3"); ok(run(test([@ssltest, "-ssl3", @extra])), 'test sslv3'); ok(run(test([@ssltest, "-ssl3", "-server_auth", @CA, @extra])), 'test sslv3 with server authentication'); ok(run(test([@ssltest, "-ssl3", "-client_auth", @CA, @extra])), 'test sslv3 with client authentication'); ok(run(test([@ssltest, "-ssl3", "-server_auth", "-client_auth", @CA, @extra])), 'test sslv3 with both server and client authentication'); } SKIP: { skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 4 if $no_anytls; ok(run(test([@ssltest, @extra])), 'test sslv2/sslv3'); ok(run(test([@ssltest, "-server_auth", @CA, @extra])), 'test sslv2/sslv3 with server authentication'); ok(run(test([@ssltest, "-client_auth", @CA, @extra])), 'test sslv2/sslv3 with client authentication'); ok(run(test([@ssltest, "-server_auth", "-client_auth", @CA, @extra])), 'test sslv2/sslv3 with both server and client authentication'); } SKIP: { skip "SSLv3 is not supported by this OpenSSL build", 4 if disabled("ssl3"); ok(run(test([@ssltest, "-bio_pair", "-ssl3", @extra])), 'test sslv3 via BIO pair'); ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA, @extra])), 'test sslv3 with server authentication via BIO pair'); ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA, @extra])), 'test sslv3 with client authentication via BIO pair'); ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA, @extra])), 'test sslv3 with both server and client authentication via BIO pair'); } SKIP: { skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1 if $no_anytls; ok(run(test([@ssltest, "-bio_pair", @extra])), 'test sslv2/sslv3 via BIO pair'); } SKIP: { skip "DTLSv1 is not supported by this OpenSSL build", 4 if disabled("dtls1"); ok(run(test([@ssltest, "-dtls1", @extra])), 'test dtlsv1'); ok(run(test([@ssltest, "-dtls1", "-server_auth", @CA, @extra])), 'test dtlsv1 with server authentication'); ok(run(test([@ssltest, "-dtls1", "-client_auth", @CA, @extra])), 'test dtlsv1 with client authentication'); ok(run(test([@ssltest, "-dtls1", "-server_auth", "-client_auth", @CA, @extra])), 'test dtlsv1 with both server and client authentication'); } SKIP: { skip "DTLSv1.2 is not supported by this OpenSSL build", 4 if disabled("dtls1_2"); ok(run(test([@ssltest, "-dtls12", @extra])), 'test dtlsv1.2'); ok(run(test([@ssltest, "-dtls12", "-server_auth", @CA, @extra])), 'test dtlsv1.2 with server authentication'); ok(run(test([@ssltest, "-dtls12", "-client_auth", @CA, @extra])), 'test dtlsv1.2 with client authentication'); ok(run(test([@ssltest, "-dtls12", "-server_auth", "-client_auth", @CA, @extra])), 'test dtlsv1.2 with both server and client authentication'); } SKIP: { skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 8 if $no_anytls; SKIP: { skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert; ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe", @extra])), 'test sslv2/sslv3 w/o (EC)DHE via BIO pair'); } ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v", @extra])), 'test sslv2/sslv3 with 1024bit DHE via BIO pair'); ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA, @extra])), 'test sslv2/sslv3 with server authentication'); ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA, @extra])), 'test sslv2/sslv3 with client authentication via BIO pair'); ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA, @extra])), 'test sslv2/sslv3 with both client and server authentication via BIO pair'); ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA, @extra])), 'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify'); SKIP: { skip "No IPv4 available on this machine", 1 unless !disabled("sock") && have_IPv4(); ok(run(test([@ssltest, "-ipv4", @extra])), 'test TLS via IPv4'); } SKIP: { skip "No IPv6 available on this machine", 1 unless !disabled("sock") && have_IPv6(); ok(run(test([@ssltest, "-ipv6", @extra])), 'test TLS via IPv6'); } } }; subtest "Testing ciphersuites" => sub { my @exkeys = (); my $ciphers = "-EXP:-PSK:-SRP:-kDH:-kECDHe"; if ($no_dh) { note "skipping DHE tests\n"; $ciphers .= ":-kDHE"; } if ($no_dsa) { note "skipping DSA tests\n"; $ciphers .= ":-aDSA"; } else { push @exkeys, "-s_cert", "certD.ss", "-s_key", "keyD.ss"; } if ($no_ec) { note "skipping EC tests\n"; $ciphers .= ":!aECDSA:!kECDH"; } else { push @exkeys, "-s_cert", "certE.ss", "-s_key", "keyE.ss"; } my @protocols = (); # FIXME: I feel unsure about the following line, is that really just TLSv1.2, or is it all of the SSLv3/TLS protocols? push(@protocols, "TLSv1.2") unless $no_tls1_2; push(@protocols, "SSLv3") unless $no_ssl3; my $protocolciphersuitcount = 0; my %ciphersuites = map { my @c = map { split(/:/, $_) } run(app(["openssl", "ciphers", "${_}:$ciphers"]), capture => 1); map { s/\R//; } @c; # chomp @c; $protocolciphersuitcount += scalar @c; $_ => [ @c ] } @protocols; plan skip_all => "None of the ciphersuites to test are available in this OpenSSL build" if $protocolciphersuitcount + scalar(@protocols) == 0; # The count of protocols is because in addition to the ciphersuits # we got above, we're running a weak DH test for each protocol plan tests => $protocolciphersuitcount + scalar(@protocols); foreach my $protocol (@protocols) { note "Testing ciphersuites for $protocol"; foreach my $cipher (@{$ciphersuites{$protocol}}) { ok(run(test([@ssltest, @exkeys, "-cipher", $cipher, $protocol eq "SSLv3" ? ("-ssl3") : ()])), "Testing $cipher"); } is(run(test([@ssltest, "-s_cipher", "EDH", "-c_cipher", 'EDH:@SECLEVEL=1', "-dhe512", $protocol eq "SSLv3" ? ("-ssl3") : ()])), 0, "testing connection with weak DH, expecting failure"); } }; subtest 'RSA/(EC)DHE/PSK tests' => sub { ###################################################################### plan tests => 5; SKIP: { skip "TLSv1.0 is not supported by this OpenSSL build", 5 if $no_tls1; SKIP: { skip "skipping anonymous DH tests", 1 if ($no_dh); ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])), 'test tlsv1 with 1024bit anonymous DH, multiple handshakes'); } SKIP: { skip "skipping RSA tests", 2 if $no_rsa; ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time", @extra])), 'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes'); skip "skipping RSA+DHE tests", 1 if $no_dh; ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])), 'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes'); } SKIP: { skip "skipping PSK tests", 2 if ($no_psk); ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])), 'test tls1 with PSK'); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])), 'test tls1 with PSK via BIO pair'); } } }; subtest 'Next Protocol Negotiation Tests' => sub { ###################################################################### plan tests => 7; SKIP: { skip "TLSv1.0 is not supported by this OpenSSL build", 7 if $no_tls1; skip "Next Protocol Negotiation is not supported by this OpenSSL build", 7 if disabled("nextprotoneg"); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client"]))); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server"]))); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server_reject"]))); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server_reject"]))); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server"]))); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2"]))); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2", "-reuse"]))); } }; subtest 'Custom Extension tests' => sub { ###################################################################### plan tests => 1; SKIP: { skip "TLSv1.0 is not supported by this OpenSSL build", 1 if $no_tls1; ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])), 'test tls1 with custom extensions'); } }; subtest 'Serverinfo tests' => sub { ###################################################################### plan tests => 5; SKIP: { skip "TLSv1.0 is not supported by this OpenSSL build", 5 if $no_tls1; note('echo test tls1 with serverinfo'); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo]))); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"]))); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"]))); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"]))); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"]))); } }; subtest 'SNI tests' => sub { plan tests => 7; SKIP: { skip "TLSv1.x is not supported by this OpenSSL build", 7 if $no_tls1 && $no_tls1_1 && $no_tls1_2; ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo"]))); ok(run(test([@ssltest, "-bio_pair", "-sn_server1", "foo"]))); ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "foo", "-sn_expect1"]))); ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "bar", "-sn_expect1"]))); ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect1"]))); ok(run(test([@ssltest, "-bio_pair", "-sn_client", "bar", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect2"]))); # Negative test - make sure it doesn't crash, and doesn't switch contexts ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foobar", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect1"]))); } }; subtest 'ALPN tests' => sub { ###################################################################### plan tests => 13; SKIP: { skip "TLSv1.0 is not supported by this OpenSSL build", 13 if $no_tls1; ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo"]))); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_server", "foo"]))); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "foo", "-alpn_expected", "foo"]))); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "foo", "-alpn_expected", "foo"]))); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo", "-alpn_expected", "foo"]))); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo,bar", "-alpn_expected", "foo"]))); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "bar,foo", "-alpn_expected", "bar"]))); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "bar,foo", "-alpn_expected", "bar"]))); is(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "bar"])), 0, "Testing ALPN with protocol mismatch, expecting failure"); is(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "baz", "-alpn_server", "bar,foo"])), 0, "Testing ALPN with protocol mismatch, expecting failure"); # ALPN + SNI ok(run(test([@ssltest, "-bio_pair", "-alpn_client", "foo,bar", "-sn_client", "alice", "-alpn_server1", "foo,123", "-sn_server1", "alice", "-alpn_server2", "bar,456", "-sn_server2", "bob", "-alpn_expected", "foo"]))); ok(run(test([@ssltest, "-bio_pair", "-alpn_client", "foo,bar", "-sn_client", "bob", "-alpn_server1", "foo,123", "-sn_server1", "alice", "-alpn_server2", "bar,456", "-sn_server2", "bob", "-alpn_expected", "bar"]))); ok(run(test([@ssltest, "-bio_pair", "-alpn_client", "foo,bar", "-sn_client", "bob", "-alpn_server2", "bar,456", "-sn_server2", "bob", "-alpn_expected", "bar"]))); } }; subtest 'SRP tests' => sub { plan tests => 4; SKIP: { skip "skipping SRP tests", 4 if $no_srp; ok(run(test([@ssltest, "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])), 'test tls1 with SRP'); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])), 'test tls1 with SRP via BIO pair'); ok(run(test([@ssltest, "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])), 'test tls1 with SRP auth'); ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])), 'test tls1 with SRP auth via BIO pair'); } }; subtest 'Multi-buffer tests' => sub { ###################################################################### plan tests => 2; SKIP: { skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 2 if $no_anytls; skip "skipping multi-buffer tests", 2 if @extra || (POSIX::uname())[4] ne "x86_64"; ok(run(test([@ssltest, "-cipher", "AES128-SHA", "-bytes", "8m"]))); # We happen to know that AES128-SHA256 is TLSv1.2 only... for now. skip "TLSv1.2 is not supported by this OpenSSL configuration", 1 if $no_tls1_2; ok(run(test([@ssltest, "-cipher", "AES128-SHA256", "-bytes", "8m"]))); } }; subtest 'DTLS Version min/max tests' => sub { my @protos; push(@protos, "dtls1") unless ($no_dtls1 || $no_dtls); push(@protos, "dtls1.2") unless ($no_dtls1_2 || $no_dtls); my @minprotos = (undef, @protos); my @maxprotos = (@protos, undef); my @shdprotos = (@protos, $protos[$#protos]); my $n = ((@protos+2) * (@protos+3))/2 - 2; my $ntests = $n * $n; plan tests => $ntests; SKIP: { skip "DTLS disabled", 1 if $ntests == 1; my $should; for (my $smin = 0; $smin < @minprotos; ++$smin) { for (my $smax = $smin ? $smin - 1 : 0; $smax < @maxprotos; ++$smax) { for (my $cmin = 0; $cmin < @minprotos; ++$cmin) { for (my $cmax = $cmin ? $cmin - 1 : 0; $cmax < @maxprotos; ++$cmax) { if ($cmax < $smin-1) { $should = "fail-server"; } elsif ($smax < $cmin-1) { $should = "fail-client"; } elsif ($cmax > $smax) { $should = $shdprotos[$smax]; } else { $should = $shdprotos[$cmax]; } my @args = (@ssltest, "-dtls"); push(@args, "-should_negotiate", $should); push(@args, "-server_min_proto", $minprotos[$smin]) if (defined($minprotos[$smin])); push(@args, "-server_max_proto", $maxprotos[$smax]) if (defined($maxprotos[$smax])); push(@args, "-client_min_proto", $minprotos[$cmin]) if (defined($minprotos[$cmin])); push(@args, "-client_max_proto", $maxprotos[$cmax]) if (defined($maxprotos[$cmax])); my $ok = run(test[@args]); if (! $ok) { print STDERR "\nsmin=$smin, smax=$smax, cmin=$cmin, cmax=$cmax\n"; print STDERR "\nFailed: @args\n"; } ok($ok); }}}}} }; subtest 'TLS session reuse' => sub { plan tests => 12; ok(run(test([@ssltest, "-server_sess_out", $server_sess, "-client_sess_out", $client_sess]))); ok(run(test([@ssltest, "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "tls1.2"]))); ok(run(test([@ssltest, "-server_max_proto", "tls1.1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "tls1.1"]))); ok(run(test([@ssltest, "-server_max_proto", "tls1.1", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess]))); ok(run(test([@ssltest, "-server_max_proto", "tls1.1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "tls1.1"]))); ok(run(test([@ssltest, "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "tls1.2"]))); ok(run(test([@ssltest, "-no_ticket", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess]))); ok(run(test([@ssltest, "-no_ticket", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "tls1.2"]))); ok(run(test([@ssltest, "-no_ticket", "-server_max_proto", "tls1.1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "tls1.1"]))); ok(run(test([@ssltest, "-no_ticket", "-server_max_proto", "tls1.1", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess]))); ok(run(test([@ssltest, "-no_ticket", "-server_max_proto", "tls1.1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "tls1.1"]))); ok(run(test([@ssltest, "-no_ticket", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "tls1.2"]))); }; subtest 'DTLS session reuse' => sub { plan tests => 12; SKIP: { skip "DTLS disabled", 12 if $no_dtls; ok(run(test([@ssltest, "-dtls", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess]))); ok(run(test([@ssltest, "-dtls", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1.2"]))); ok(run(test([@ssltest, "-dtls", "-server_max_proto", "dtls1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "dtls1"]))); ok(run(test([@ssltest, "-dtls", "-server_max_proto", "dtls1", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess]))); ok(run(test([@ssltest, "-dtls", "-server_max_proto", "dtls1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1"]))); ok(run(test([@ssltest, "-dtls", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "dtls1.2"]))); ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess]))); ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1.2"]))); ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_max_proto", "dtls1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "dtls1"]))); ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_max_proto", "dtls1", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess]))); ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_max_proto", "dtls1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1"]))); ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "dtls1.2"]))); } }; subtest 'Certificate Transparency tests' => sub { ###################################################################### plan tests => 3; SKIP: { skip "Certificate Transparency is not supported by this OpenSSL build", 3 if $no_ct; skip "TLSv1.0 is not supported by this OpenSSL build", 3 if $no_tls1; $ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf"); my @ca = qw(-CAfile certCA.ss); ok(run(test([@ssltest, @ca, "-bio_pair", "-tls1", "-noct"]))); # No SCTs provided, so this should fail. ok(run(test([@ssltest, @ca, "-bio_pair", "-tls1", "-ct", "-should_negotiate", "fail-client"]))); # No SCTs provided, unverified chains still succeed. ok(run(test([@ssltest, "-bio_pair", "-tls1", "-ct"]))); } }; } sub testsslproxy { my $key = shift || srctop_file("apps","server.pem"); my $cert = shift || srctop_file("apps","server.pem"); my $CAtmp = shift; my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs")); my @extra = @_; my @ssltest = ("ssltest_old", "-s_key", $key, "-s_cert", $cert, "-c_key", $key, "-c_cert", $cert); # plan tests => 16; note('Testing a lot of proxy conditions.'); # We happen to know that certP1.ss has policy letters "AB" and # certP2.ss has policy letters "BC". However, because certP2.ss # has certP1.ss as issuer, when it's used, both their policy # letters get combined into just "B". # The policy letter(s) then get filtered with the given auth letter # in the table below, and the result gets tested with the given # condition. For details, read ssltest_old.c # # certfilename => [ [ auth, cond, expected result ] ... ] my %expected = ( "certP1.ss" => [ [ [ 'A', 'A' ], 1 ], [ [ 'A', 'B' ], 0 ], [ [ 'A', 'C' ], 0 ], [ [ 'A', 'A|B&!C' ], 1 ], [ [ 'B', 'A' ], 0 ], [ [ 'B', 'B' ], 1 ], [ [ 'B', 'C' ], 0 ], [ [ 'B', 'A|B&!C' ], 1 ], [ [ 'C', 'A' ], 0 ], [ [ 'C', 'B' ], 0 ], [ [ 'C', 'C' ], 0 ], [ [ 'C', 'A|B&!C' ], 0 ], [ [ 'BC', 'A' ], 0 ], [ [ 'BC', 'B' ], 1 ], [ [ 'BC', 'C' ], 0 ], [ [ 'BC', 'A|B&!C' ], 1 ] ], "certP2.ss" => [ [ [ 'A', 'A' ], 0 ], [ [ 'A', 'B' ], 0 ], [ [ 'A', 'C' ], 0 ], [ [ 'A', 'A|B&!C' ], 0 ], [ [ 'B', 'A' ], 0 ], [ [ 'B', 'B' ], 1 ], [ [ 'B', 'C' ], 0 ], [ [ 'B', 'A|B&!C' ], 1 ], [ [ 'C', 'A' ], 0 ], [ [ 'C', 'B' ], 0 ], [ [ 'C', 'C' ], 0 ], [ [ 'C', 'A|B&!C' ], 0 ], [ [ 'BC', 'A' ], 0 ], [ [ 'BC', 'B' ], 1 ], [ [ 'BC', 'C' ], 0 ], [ [ 'BC', 'A|B&!C' ], 1 ] ] ); SKIP: { skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", scalar(@{$expected{$cert}}) if $no_anytls; foreach (@{$expected{$cert}}) { my $auth = $_->[0]->[0]; my $cond = $_->[0]->[1]; my $res = $_->[1]; is(run(test([@ssltest, "-server_auth", @CA, "-proxy", "-proxy_auth", $auth, "-proxy_cond", $cond])), $res, "test tlsv1, server auth, proxy auth $auth and cond $cond (expect " .($res ? "success" : "failure").")"); } } }