- 05 4月, 2018 1 次提交
-
-
由 Matt Caswell 提交于
When libssl is initialised it will attempt to load any config file. This ensures any system_default configuration (as per https://github.com/openssl/openssl/pull/4848) is used. Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5818)
-
- 04 4月, 2018 1 次提交
-
-
由 Bernd Edlinger 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5856)
-
- 03 4月, 2018 2 次提交
-
-
由 Matt Caswell 提交于
Where a CMS detached signature is used with text content the text goes through a canonicalisation process first prior to signing or verifying a signature. This process strips trailing space at the end of lines, converts line terminators to CRLF and removes additional trailing line terminators at the end of a file. A bug in the canonicalisation process meant that some characters, such as form-feed, were incorrectly treated as whitespace and removed. This is contrary to the specification (RFC5485). This fix could mean that detached text data signed with an earlier version of OpenSSL 1.1.0 may fail to verify using the fixed version, or text data signed with a fixed OpenSSL may fail to verify with an earlier version of OpenSSL 1.1.0. A workaround is to only verify the canonicalised text data and use the "-binary" flag (for the "cms" command line application) or set the SMIME_BINARY/PKCS7_BINARY/CMS_BINARY flags (if using CMS_verify()). Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5790)
-
由 Matt Caswell 提交于
Fix the last release version number in CHANGES Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5852)
-
- 30 3月, 2018 1 次提交
-
-
由 Dr. Matthias St. Pierre 提交于
The RAND_DRBG API was added in PR #5462 and modified by PR #5547. This commit adds the corresponding documention. Reviewed-by: NKurt Roeckx <kurt@roeckx.be> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5461)
-
- 27 3月, 2018 2 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Rich Salz 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5756)
-
- 19 3月, 2018 1 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5644)
-
- 14 3月, 2018 1 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5392)
-
- 08 3月, 2018 1 次提交
-
-
由 Viktor Dukhovni 提交于
With "-multi" the OCSP responder forks multiple child processes, and respawns them as needed. This can be used as a long-running service, not just a demo program. Therefore the index file is automatically re-read when changed. The responder also now optionally times out client requests. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 05 3月, 2018 2 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NKurt Roeckx <kurt@roeckx.be> (Merged from https://github.com/openssl/openssl/pull/5470)
-
由 Rich Salz 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5504)
-
- 02 3月, 2018 1 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NKurt Roeckx <kurt@roeckx.be> (Merged from https://github.com/openssl/openssl/pull/5481)
-
- 23 2月, 2018 1 次提交
-
-
由 Richard Levitte 提交于
[extended tests] Reviewed-by: NMatt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2688)
-
- 13 2月, 2018 3 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Dr. Matthias St. Pierre 提交于
Removed mixed tabs (converted tabs to eight spaces) Reviewed-by: NMatt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5344)
-
由 Dr. Matthias St. Pierre 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5344)
-
- 12 2月, 2018 1 次提交
-
-
由 Matt Caswell 提交于
Fix a typo in INSTALL and update the link in CHANGES Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5329)
-
- 08 2月, 2018 1 次提交
-
-
由 Matt Caswell 提交于
[extended tests] Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5266)
-
- 30 1月, 2018 1 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5185)
-
- 28 1月, 2018 1 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5177)
-
- 24 1月, 2018 1 次提交
-
-
由 Pauli 提交于
Support added for these two digests, available only via the EVP interface. Reviewed-by: NMatt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5093)
-
- 08 1月, 2018 1 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5031)
-
- 07 1月, 2018 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5028)
-
- 02 1月, 2018 1 次提交
-
-
由 Daniel Bevenius 提交于
Similar to commit 17b60280( "Remove extra `the` in SSL_SESSION_set1_id.pod"), this commit removes typos where additional 'the' have been added. Reviewed-by: NAndy Polyakov <appro@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4999)
-
- 13 12月, 2017 1 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NAndy Polyakov <appro@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4840)
-
- 08 12月, 2017 1 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NAndy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4818)
-
- 06 12月, 2017 1 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 21 11月, 2017 1 次提交
-
-
由 Paul Yang 提交于
* Introduce RSA_generate_multi_prime_key to generate multi-prime RSA private key. As well as the following functions: RSA_get_multi_prime_extra_count RSA_get0_multi_prime_factors RSA_get0_multi_prime_crt_params RSA_set0_multi_prime_params RSA_get_version * Support EVP operations for multi-prime RSA * Support ASN.1 operations for multi-prime RSA * Support multi-prime check in RSA_check_key_ex * Support multi-prime RSA in apps/genrsa and apps/speed * Support multi-prime RSA manipulation functions * Test cases and documentation are added * CHANGES is updated Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NBernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/4241)
-
- 12 11月, 2017 1 次提交
-
-
由 Josh Soref 提交于
Around 138 distinct errors found and fixed; thanks! Reviewed-by: NKurt Roeckx <kurt@roeckx.be> Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3459)
-
- 06 11月, 2017 2 次提交
-
-
由 Jack Lloyd 提交于
SM3 is a secure hash function which is part of the Chinese "Commercial Cryptography" suite of algorithms which use is required for certain commercial applications in China. Reviewed-by: NPaul Dale <paul.dale@oracle.com> Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4616)
-
由 FdaSilvaYY 提交于
Based on patch from Tomasz Moń: https://groups.google.com/forum/#!topic/mailing.openssl.dev/fQxXvCg1uQYReviewed-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NBernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/1008)
-
- 02 11月, 2017 1 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
- 31 10月, 2017 1 次提交
-
-
由 Ronald Tse 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NPaul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/4552)
-
- 26 10月, 2017 1 次提交
-
-
由 Ronald Tse 提交于
Reviewed-by: NPaul Dale <paul.dale@oracle.com> Reviewed-by: NMatt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4581)
-
- 07 10月, 2017 1 次提交
-
-
由 Rich Salz 提交于
Rewrite the -req-nodes flag from CA.pl (idea from Andy) Rewrite ERR_string_error_n Reviewed-by: NAndy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4478)
-
- 30 8月, 2017 1 次提交
-
-
由 Jon Spillett 提交于
AEAD cipher mode implementation is based on that used for AES: https://tools.ietf.org/html/rfc5116 TLS GCM cipher suites as specified in: https://tools.ietf.org/html/rfc6209Reviewed-by: NPaul Dale <paul.dale@oracle.com> Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4287)
-
- 27 8月, 2017 1 次提交
-
-
由 Rich Salz 提交于
VisualStudio 6 and earlier aren't supported. Reviewed-by: NAndy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4263)
-
- 15 8月, 2017 1 次提交
-
-
由 Richard Levitte 提交于
This allows callers to set a mark, and then clear it without removing the errors. Useful in case an error is encountered that should be returned up the call stack. Reviewed-by: NAndy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4094)
-
- 07 8月, 2017 1 次提交
-
-
由 Rich Salz 提交于
Use atfork to count child forks, and reseed DRBG when the counts don't match. Reviewed-by: NPaul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/4101)
-