- 12 12月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 13 10月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
Loading the config file after processing command line options can cause problems, e.g. where an engine provides new ciphers/digests these are not then recoginised on the command line. Move the default config file loading to before the command line option processing. Whilst we're doing this we might as well centralise this instead of doing it individually for each application. Finally if we do it before the OpenSSL_add_ssl_algorithms() call then ciphersuites provided by an engine (e.g. GOST) can be available to the apps. RT#4085 RT#4086 Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 06 9月, 2015 4 次提交
-
-
由 Richard Levitte 提交于
To set both the incoming and outgoing data when 'encrypting' or 'decrypting' to FORMAT_BASE64 wasn't quite the right thing to do. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Richard Levitte 提交于
If the output to stdout or the input from stdin is meant to be binary, it's deeply unsetting to get the occasional LF converted to CRLF or the other way around. If someone happens to forget to redirect stdin or stdout, they will get gibberish anyway, line ending conversion will not change that. Therefore, let's not have dup_bio_* decide unilaterally what mode the BIO derived from stdin and stdout, and rather let the app decide by declaring the intended format. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Richard Levitte 提交于
The different apps had the liberty to decide whether they would open their input and output files in binary mode or not, which could be confusing if two different apps were handling the same type of file in different ways. The solution is to centralise the decision of low level file organisation, and that the apps would use a selection of formats to state the intent of the file. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Richard Levitte 提交于
Most of all, we needed to sort out which ones are binary and which ones are text, and make sure they are treated accordingly and consistently so Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 02 9月, 2015 1 次提交
-
-
由 Adam Eijdenberg 提交于
clang suggests %llu instead, but it isn't clear that is portable on all platforms. C99 and above define a handy macro for us, so we try to use that definition and fall back to current definition if needed (though we switch to 'u' for unsigned). Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 03 6月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Here are the "rules" for handling flags that depend on #ifdef: - Do not ifdef the enum. Only ifdef the OPTIONS table. All ifdef'd entries appear at the end; by convention "engine" is last. This ensures that at run-time, the flag will never be recognized/allowed. The next two bullets entries are for silencing compiler warnings: - In the while/switch parsing statement, use #ifdef for the body to disable it; leave the "case OPT_xxx:" and "break" statements outside the ifdef/ifndef. See ciphers.c for example. - If there are multiple options controlled by a single guard, OPT_FOO, OPT_BAR, etc., put a an #ifdef around the set, and then do "#else" and a series of case labels and a break. See OPENSSL_NO_AES in cms.c for example. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 29 5月, 2015 1 次提交
-
-
由 Richard Levitte 提交于
The module loading feature got broken a while ago, so restore it, but have it a bit more explicit this time around. Reviewed-by: NStephen Henson <steve@openssl.org>
-
- 05 5月, 2015 2 次提交
-
-
由 Richard Levitte 提交于
RT2943 only complains about the incorrect check of -K argument size, we might as well do the same thing with the -iv argument. Before this, we only checked that the given argument wouldn't give a bitstring larger than EVP_MAX_KEY_LENGTH. we can be more precise and check against the size of the actual cipher used. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 01 5月, 2015 2 次提交
-
-
由 Rich Salz 提交于
Don't check for NULL before calling OPENSSL_free Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Rich Salz 提交于
No point in proceeding if you're out of memory. So change *all* OPENSSL_malloc calls in apps to use the new routine which prints a message and exits. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 30 4月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Replace ad-hoc ascii->hex with isxdigit and new app_tohex. Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
- 29 4月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Following ANSI C rules, remove the casts from calls to OPENSSL_malloc and OPENSSL_realloc. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 26 4月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Make setup_engine be a dummy if NO_ENGINE is enabled. The option is not enabled if NO_ENGINE is enabled, so the one "wasted" variable just sits there. Removes some variables and code. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 25 4月, 2015 1 次提交
-
-
由 Rich Salz 提交于
This is merges the old "rsalz-monolith" branch over to master. The biggest change is that option parsing switch from cascasding 'else if strcmp("-foo")' to a utility routine and somethin akin to getopt. Also, an error in the command line no longer prints the full summary; use -help (or --help :) for that. There have been many other changes and code-cleanup, see bullet list below. Special thanks to Matt for the long and detailed code review. TEMPORARY: For now, comment out CRYPTO_mem_leaks() at end of main Tickets closed: RT3515: Use 3DES in pkcs12 if built with no-rc2 RT1766: s_client -reconnect and -starttls broke RT2932: Catch write errors RT2604: port should be 'unsigned short' RT2983: total_bytes undeclared #ifdef RENEG RT1523: Add -nocert to fix output in x509 app RT3508: Remove unused variable introduced by b09eb246 RT3511: doc fix; req default serial is random RT1325,2973: Add more extensions to c_rehash RT2119,3407: Updated to dgst.pod RT2379: Additional typo fix RT2693: Extra include of string.h RT2880: HFS is case-insensitive filenames RT3246: req command prints version number wrong Other changes; incompatibilities marked with *: Add SCSV support Add -misalign to speed command Make dhparam, dsaparam, ecparam, x509 output C in proper style Make some internal ocsp.c functions void Only display cert usages with -help in verify Use global bio_err, remove "BIO*err" parameter from functions For filenames, - always means stdin (or stdout as appropriate) Add aliases for -des/aes "wrap" ciphers. *Remove support for IISSGC (server gated crypto) *The undocumented OCSP -header flag is now "-header name=value" *Documented the OCSP -header flag Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 25 3月, 2015 2 次提交
-
-
由 Rich Salz 提交于
This commit handles BIO_ACCEPT_free BIO_CB_FREE BIO_CONNECT_free BIO_free BIO_free_all BIO_vfree Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Matt Caswell 提交于
Ensure RAND_bytes return value is checked correctly, and that we no longer use RAND_pseudo_bytes. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 23 1月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Use setbuf(fp, NULL) instead of setvbuf(). This removes some ifdef complexity because all of our platforms support setbuf. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 22 1月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 17 7月, 2014 1 次提交
-
-
由 Matt Caswell 提交于
PR#3442 Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 11 6月, 2014 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-
- 15 5月, 2014 1 次提交
-
-
由 Dr. Stephen Henson 提交于
(cherry picked from commit 09184dddead165901700b31eb39d540ba30f93c5)
-
- 11 2月, 2012 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-
- 14 11月, 2011 1 次提交
-
-
由 Ben Laurie 提交于
aspirational __owur annotations.
-
- 19 3月, 2011 1 次提交
-
-
由 Richard Levitte 提交于
submitted by Steven M. Schweda <sms@antinode.info>
-
- 12 6月, 2010 1 次提交
-
-
由 Ben Laurie 提交于
-
- 05 10月, 2009 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-
- 03 3月, 2009 1 次提交
-
-
由 Ben Laurie 提交于
-
- 13 3月, 2008 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Initial support for CMS. Add zlib compression BIO. Add AES key wrap implementation. Generalize S/MIME MIME code to support CMS and/or PKCS7.
-
- 31 7月, 2007 1 次提交
-
-
由 Bodo Möller 提交于
-
- 30 11月, 2006 1 次提交
-
-
由 Nils Larsch 提交于
Submitted by: Tracy Camp <tracyx.e.camp@intel.com>
-
- 23 9月, 2006 1 次提交
-
-
由 Dr. Stephen Henson 提交于
PR:1374
-
- 30 4月, 2005 1 次提交
-
-
由 Richard Levitte 提交于
-
- 27 12月, 2003 1 次提交
-
-
由 Richard Levitte 提交于
Use BUF_strlcat() instead of strcat(). Use BIO_snprintf() instead of sprintf(). In some cases, keep better track of buffer lengths. This is part of a large change submitted by Markus Friedl <markus@openbsd.org>
-
- 30 10月, 2003 1 次提交
-
-
由 Geoff Thorpe 提交于
I have tried to convert 'len' type variable declarations to unsigned as a means to address these warnings when appropriate, but when in doubt I have used casts in the comparisons instead. The better solution (that would get us all lynched by API users) would be to go through and convert all the function prototypes and structure definitions to use unsigned variables except when signed is necessary. The proliferation of (signed) "int" for strictly non-negative uses is unfortunate.
-
- 31 1月, 2003 1 次提交
-
-
由 Richard Levitte 提交于
PR: 287
-
- 04 12月, 2002 1 次提交
-
-
由 Richard Levitte 提交于
exit() in whatever way works for the intended platform, and define OPENSSL_EXIT() to have the old meaning (the name is of course because it's only used in the openssl program)
-
- 28 11月, 2002 1 次提交
-
-
由 Richard Levitte 提交于
I've covered all the memset()s I felt safe modifying, but may have missed some.
-