- 11 5月, 2016 1 次提交
-
-
由 Andy Polyakov 提交于
Reviewed-by: NStephen Henson <steve@openssl.org>
-
- 22 4月, 2016 1 次提交
-
-
由 Matt Caswell 提交于
no-cmac was failing on Windows/VMS due to libcrypto.num not marking the CMAC functions properly. Found due to the new symbol consistency test. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 20 4月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Add copyright to most .pl files This does NOT cover any .pl file that has other copyright in it. Most of those are Andy's but some are public domain. Fix typo's in some existing files. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 13 4月, 2016 1 次提交
-
-
由 Matt Caswell 提交于
libssl needs to have access to some internal libcrypto symbols. Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 08 4月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 23 3月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 19 3月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 18 3月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 11 3月, 2016 1 次提交
-
-
由 Bill Cox 提交于
Reviewed-by: NAndy Polyakov <appro@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 10 3月, 2016 1 次提交
-
-
由 Kurt Roeckx 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org> MR: #2296
-
- 08 3月, 2016 1 次提交
-
-
由 Mat 提交于
Add UI to known algorithms in mkdef.pl Signed-off-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 05 3月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 03 3月, 2016 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 29 2月, 2016 1 次提交
-
-
由 Matt Caswell 提交于
VisualStudio 2015 has a bug where an internal compiler error was occurring. By reordering the DEFINE_STACK_OF declarations for SSL_CIPHER and SSL_COMP until after the ssl3.h include everything seems ok again. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 27 2月, 2016 1 次提交
-
-
由 Rob Percival 提交于
Reviewed-by: NBen Laurie <ben@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 26 2月, 2016 2 次提交
-
-
由 Matt Caswell 提交于
mkdef.pl was issuing the following error: Use of uninitialized value within %tag in numeric eq (==) at util/mkdef.pl line 560, <IN> line 92 This was because it was treating a __cplusplus "#ifdef" check as a "tag" but then skipping over the corresponding "#endif". Therefore after processing a file it still had "left over" tags from processing the previous file. It was also getting confused by "#if" checks that didn't match is pre-defined styles. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Alessandro Ghedini 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 19 2月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Add -DBIO_DEBUG to --strict-warnings. Remove comments about outdated debugging ifdef guards. Remove md_rand ifdef guarding an assert; it doesn't seem used. Remove the conf guards in conf_api since we use OPENSSL_assert, not assert. For pkcs12 stuff put OPENSSL_ in front of the macro name. Merge TLS_DEBUG into SSL_DEBUG. Various things just turned on/off asserts, mainly for checking non-NULL arguments, which is now removed: camellia, bn_ctx, crypto/modes. Remove some old debug code, that basically just printed things to stderr: DEBUG_PRINT_UNKNOWN_CIPHERSUITES, DEBUG_ZLIB, OPENSSL_RI_DEBUG, RL_DEBUG, RSA_DEBUG, SCRYPT_DEBUG. Remove OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 17 2月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 15 2月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
Three header files from crypto/include/internal were used by util/mkdef.pl. This should never be needed. Some test program used these, which made it a valid reason at the time to make the some internal symbols public in the shared libraries, but that's not the case any more. However, to be able to link libssl.so, some symbols found in include/internal headers still need to be made public. Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
- 12 2月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
Once upon a time, there was chop, which somply chopped off the last character of $_ or a given variable, and it was used to take off the EOL character (\n) of strings. ... but then, you had to check for the presence of such character. So came chomp, the better chop which checks for \n before chopping it off. And this worked well, as long as Perl made internally sure that all EOLs were converted to \n. These days, though, there seems to be a mixture of perls, so lines from files in the "wrong" environment might have \r\n as EOL, or just \r (Mac OS, unless I'm misinformed). So it's time we went for the more generic variant and use s|\R$||, the better chomp which recognises all kinds of known EOLs and chops them off. A few chops were left alone, as they are use as surgical tools to remove one last slash or one last comma. NOTE: \R came with perl 5.10.0. It means that from now on, our scripts will fail with any older version. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 10 2月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
As part of this, change util/mkdef.pl to stop adding libraries to depend on in its output. mkdef.pl should ONLY output a symbol vector. Because symbol names can't be longer than 31 characters, we use the compiler to shorten those that are longer down to 23 characters plus an 8 character CRC. To make sure users of our header files will pick up on that automatically, add the DEC C supported extra headers files __decc_include_prologue.h and __decc_include_epilogue.h. Furthermore, we add a config.com, so VMS people can configure just as comfortably as any Unix folks, thusly: @config Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 09 2月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
util/mkdef.pl and Makefile.shared needs to know about the source and the build directories. Additionally, Makefile.shared needs to know how to build shared libraries in a directory other than the current one. Reviewed-by: NBen Laurie <ben@openssl.org>
-
- 29 1月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 25 1月, 2016 1 次提交
-
-
由 Rich Salz 提交于
This is an internal facility, never documented, not for public consumption. Move it into ssl (where it's only used for DTLS). I also made the typedef's for pqueue and pitem follow our style: they name structures, not pointers. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 23 1月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
For this adaptation, the variables $options and $version needed to move to %config in Configure, and why not move all other variables holding diverse version numbers at the same time? Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 15 1月, 2016 2 次提交
-
-
由 Richard Levitte 提交于
It seems that the r modifier for s/// is fairly new. It's reported not to exist in perl 5.10.1, so it's better to avoid it when possible. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Benjamin Kaduk 提交于
The entropy-gathering daemon is used only on a small number of machines. Provide a configure knob so that EGD support can be disabled by default but re-enabled on those systems that do need it. Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
- 12 1月, 2016 5 次提交
-
-
由 Richard Levitte 提交于
It was assumed that the syntax FOO/Foo=PROCEDURE would create both an upper case and mixed case symbol in the GST. Not so, it requires having both FOO/Foo=PROCEDURE (to create the upper case alias) and Foo=PROCEDURE (to create the mixed case slot). We make sure that any symbol always occupies two slots (even those that don't exist) by filling up with SPARE when necessary. That will assure that any changes will still have the same symbols in the same slots no matter what (save a complete rewrite of the ordinals files). Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
It was assumed that a dummy with the type PRIVATE_PROCEDURE would simply occupy a slot but otherwise ignore the symbol. Not so, but there is SPARE for that purpose. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 11 1月, 2016 2 次提交
-
-
由 Viktor Dukhovni 提交于
Also always abort() on leak failure. Reviewed-by: NStephen Henson <steve@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 10 1月, 2016 4 次提交
-
-
由 Viktor Dukhovni 提交于
Support two-digest major/minor/micro numbers and die when the input fails to parse Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 09 1月, 2016 1 次提交
-
-
由 Rich Salz 提交于
In order for mkdep to find #ifdef'd functions, they must be wrapped (in the header file) with #ifndef OPENSSL_NO_... So do that for various CRYPTO_mem_debug... things. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-