/**
 * \file sha512.h
 * \brief This file contains SHA-384 and SHA-512 definitions and functions.
 *
 * The Secure Hash Algorithms 384 and 512 (SHA-384 and SHA-512) cryptographic
 * hash functions are defined in <em>FIPS 180-4: Secure Hash Standard (SHS)</em>.
 */
/*
 *  Copyright The Mbed TLS Contributors
 *  SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 *
 *  This file is provided under the Apache License 2.0, or the
 *  GNU General Public License v2.0 or later.
 *
 *  **********
 *  Apache License 2.0:
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may
 *  not use this file except in compliance with the License.
 *  You may obtain a copy of the License at
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 *  **********
 *
 *  **********
 *  GNU General Public License v2.0 or later:
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License along
 *  with this program; if not, write to the Free Software Foundation, Inc.,
 *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 *  **********
 */
#ifndef MBEDTLS_SHA512_H
#define MBEDTLS_SHA512_H

#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif

#include <stddef.h>
#include <stdint.h>

/* MBEDTLS_ERR_SHA512_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_SHA512_HW_ACCEL_FAILED                -0x0039  /**< SHA-512 hardware accelerator failed */
#define MBEDTLS_ERR_SHA512_BAD_INPUT_DATA                 -0x0075  /**< SHA-512 input data was malformed. */

#ifdef __cplusplus
extern "C" {
#endif

#if !defined(MBEDTLS_SHA512_ALT)
// Regular implementation
//

/**
 * \brief          The SHA-512 context structure.
 *
 *                 The structure is used both for SHA-384 and for SHA-512
 *                 checksum calculations. The choice between these two is
 *                 made in the call to mbedtls_sha512_starts_ret().
 */
typedef struct mbedtls_sha512_context
{
    uint64_t total[2];          /*!< The number of Bytes processed. */
    uint64_t state[8];          /*!< The intermediate digest state. */
    unsigned char buffer[128];  /*!< The data block being processed. */
    int is384;                  /*!< Determines which function to use:
                                     0: Use SHA-512, or 1: Use SHA-384. */
}
mbedtls_sha512_context;

#else  /* MBEDTLS_SHA512_ALT */
#include "sha512_alt.h"
#endif /* MBEDTLS_SHA512_ALT */

/**
 * \brief          This function initializes a SHA-512 context.
 *
 * \param ctx      The SHA-512 context to initialize. This must
 *                 not be \c NULL.
 */
void mbedtls_sha512_init( mbedtls_sha512_context *ctx );

/**
 * \brief          This function clears a SHA-512 context.
 *
 * \param ctx      The SHA-512 context to clear. This may be \c NULL,
 *                 in which case this function does nothing. If it
 *                 is not \c NULL, it must point to an initialized
 *                 SHA-512 context.
 */
void mbedtls_sha512_free( mbedtls_sha512_context *ctx );

/**
 * \brief          This function clones the state of a SHA-512 context.
 *
 * \param dst      The destination context. This must be initialized.
 * \param src      The context to clone. This must be initialized.
 */
void mbedtls_sha512_clone( mbedtls_sha512_context *dst,
                           const mbedtls_sha512_context *src );

/**
 * \brief          This function starts a SHA-384 or SHA-512 checksum
 *                 calculation.
 *
 * \param ctx      The SHA-512 context to use. This must be initialized.
 * \param is384    Determines which function to use. This must be
 *                 either \c for SHA-512, or \c 1 for SHA-384.
 *
 * \return         \c 0 on success.
 * \return         A negative error code on failure.
 */
int mbedtls_sha512_starts_ret( mbedtls_sha512_context *ctx, int is384 );

/**
 * \brief          This function feeds an input buffer into an ongoing
 *                 SHA-512 checksum calculation.
 *
 * \param ctx      The SHA-512 context. This must be initialized
 *                 and have a hash operation started.
 * \param input    The buffer holding the input data. This must
 *                 be a readable buffer of length \p ilen Bytes.
 * \param ilen     The length of the input data in Bytes.
 *
 * \return         \c 0 on success.
 * \return         A negative error code on failure.
 */
int mbedtls_sha512_update_ret( mbedtls_sha512_context *ctx,
                    const unsigned char *input,
                    size_t ilen );

/**
 * \brief          This function finishes the SHA-512 operation, and writes
 *                 the result to the output buffer.
 *
 * \param ctx      The SHA-512 context. This must be initialized
 *                 and have a hash operation started.
 * \param output   The SHA-384 or SHA-512 checksum result.
 *                 This must be a writable buffer of length \c 64 Bytes.
 *
 * \return         \c 0 on success.
 * \return         A negative error code on failure.
 */
int mbedtls_sha512_finish_ret( mbedtls_sha512_context *ctx,
                               unsigned char output[64] );

/**
 * \brief          This function processes a single data block within
 *                 the ongoing SHA-512 computation.
 *                 This function is for internal use only.
 *
 * \param ctx      The SHA-512 context. This must be initialized.
 * \param data     The buffer holding one block of data. This
 *                 must be a readable buffer of length \c 128 Bytes.
 *
 * \return         \c 0 on success.
 * \return         A negative error code on failure.
 */
int mbedtls_internal_sha512_process( mbedtls_sha512_context *ctx,
                                     const unsigned char data[128] );
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
#if defined(MBEDTLS_DEPRECATED_WARNING)
#define MBEDTLS_DEPRECATED      __attribute__((deprecated))
#else
#define MBEDTLS_DEPRECATED
#endif
/**
 * \brief          This function starts a SHA-384 or SHA-512 checksum
 *                 calculation.
 *
 * \deprecated     Superseded by mbedtls_sha512_starts_ret() in 2.7.0
 *
 * \param ctx      The SHA-512 context to use. This must be initialized.
 * \param is384    Determines which function to use. This must be either
 *                 \c 0 for SHA-512 or \c 1 for SHA-384.
 */
MBEDTLS_DEPRECATED void mbedtls_sha512_starts( mbedtls_sha512_context *ctx,
                                               int is384 );

/**
 * \brief          This function feeds an input buffer into an ongoing
 *                 SHA-512 checksum calculation.
 *
 * \deprecated     Superseded by mbedtls_sha512_update_ret() in 2.7.0.
 *
 * \param ctx      The SHA-512 context. This must be initialized
 *                 and have a hash operation started.
 * \param input    The buffer holding the data. This must be a readable
 *                 buffer of length \p ilen Bytes.
 * \param ilen     The length of the input data in Bytes.
 */
MBEDTLS_DEPRECATED void mbedtls_sha512_update( mbedtls_sha512_context *ctx,
                                               const unsigned char *input,
                                               size_t ilen );

/**
 * \brief          This function finishes the SHA-512 operation, and writes
 *                 the result to the output buffer.
 *
 * \deprecated     Superseded by mbedtls_sha512_finish_ret() in 2.7.0.
 *
 * \param ctx      The SHA-512 context. This must be initialized
 *                 and have a hash operation started.
 * \param output   The SHA-384 or SHA-512 checksum result. This must
 *                 be a writable buffer of size \c 64 Bytes.
 */
MBEDTLS_DEPRECATED void mbedtls_sha512_finish( mbedtls_sha512_context *ctx,
                                               unsigned char output[64] );

/**
 * \brief          This function processes a single data block within
 *                 the ongoing SHA-512 computation. This function is for
 *                 internal use only.
 *
 * \deprecated     Superseded by mbedtls_internal_sha512_process() in 2.7.0.
 *
 * \param ctx      The SHA-512 context. This must be initialized.
 * \param data     The buffer holding one block of data. This must be
 *                 a readable buffer of length \c 128 Bytes.
 */
MBEDTLS_DEPRECATED void mbedtls_sha512_process(
                                            mbedtls_sha512_context *ctx,
                                            const unsigned char data[128] );

#undef MBEDTLS_DEPRECATED
#endif /* !MBEDTLS_DEPRECATED_REMOVED */

/**
 * \brief          This function calculates the SHA-512 or SHA-384
 *                 checksum of a buffer.
 *
 *                 The function allocates the context, performs the
 *                 calculation, and frees the context.
 *
 *                 The SHA-512 result is calculated as
 *                 output = SHA-512(input buffer).
 *
 * \param input    The buffer holding the input data. This must be
 *                 a readable buffer of length \p ilen Bytes.
 * \param ilen     The length of the input data in Bytes.
 * \param output   The SHA-384 or SHA-512 checksum result.
 *                 This must be a writable buffer of length \c 64 Bytes.
 * \param is384    Determines which function to use. This must be either
 *                 \c 0 for SHA-512, or \c 1 for SHA-384.
 *
 * \return         \c 0 on success.
 * \return         A negative error code on failure.
 */
int mbedtls_sha512_ret( const unsigned char *input,
                        size_t ilen,
                        unsigned char output[64],
                        int is384 );

#if !defined(MBEDTLS_DEPRECATED_REMOVED)
#if defined(MBEDTLS_DEPRECATED_WARNING)
#define MBEDTLS_DEPRECATED      __attribute__((deprecated))
#else
#define MBEDTLS_DEPRECATED
#endif

/**
 * \brief          This function calculates the SHA-512 or SHA-384
 *                 checksum of a buffer.
 *
 *                 The function allocates the context, performs the
 *                 calculation, and frees the context.
 *
 *                 The SHA-512 result is calculated as
 *                 output = SHA-512(input buffer).
 *
 * \deprecated     Superseded by mbedtls_sha512_ret() in 2.7.0
 *
 * \param input    The buffer holding the data. This must be a
 *                 readable buffer of length \p ilen Bytes.
 * \param ilen     The length of the input data in Bytes.
 * \param output   The SHA-384 or SHA-512 checksum result. This must
 *                 be a writable buffer of length \c 64 Bytes.
 * \param is384    Determines which function to use. This must be either
 *                 \c 0 for SHA-512, or \c 1 for SHA-384.
 */
MBEDTLS_DEPRECATED void mbedtls_sha512( const unsigned char *input,
                                        size_t ilen,
                                        unsigned char output[64],
                                        int is384 );

#undef MBEDTLS_DEPRECATED
#endif /* !MBEDTLS_DEPRECATED_REMOVED */

#if defined(MBEDTLS_SELF_TEST)

 /**
 * \brief          The SHA-384 or SHA-512 checkup routine.
 *
 * \return         \c 0 on success.
 * \return         \c 1 on failure.
 */
int mbedtls_sha512_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */

#ifdef __cplusplus
}
#endif

#endif /* mbedtls_sha512.h */
