What is this? | How to build? | How to run? | V4L2 | Code Coverage | Status | Results | Similar projects | Feedback


v4l-test: Test environment for Video For Linux Two (V4L2) API

Download v4l-test or visit v4l-test project page at sourceforge.net .

What is this?

v4l-test is a test environment for V4L2 drivers. The V4L2 drivers are running under Linux in kernel space. This test environment is running in userspace and tries what normal video application would do. It also tries some things which are supposed to test the error handling mechanisms of a V4L2 driver. These are the "invalid test cases".

The V4L2 API only covers webcams and analog tuner cards. The digital broadcast is out of the scope of V4L2 API so it is also out of the scope of this test environment. See Linux DVB API for digital broadcast and Chapter 6.3 Relation of V4L2 to other Linux multimedia APIs in V4L2 specification.

How to build?

To build the test environment you will need a C compiler, "make" and the CUnit development files installed. Just type "make" and the test environment is ready.

How to run?

You need to have a video device (i.e. webcam, tuner card, etc.) connected to your system and available under /dev/video0. If you don't have any hardware device available, you can still test the "Virtual Video Driver". To compile this you need to compile your kernel with CONFIG_VIDEO_VIVI=m under:

  -> Device Drivers
    -> Multimedia devices
      -> Video For Linux
        -> Video capture adapters
          -> Virtual Video Driver

At this point you can execute v4l-test.

Video for Linux Two Specification

The V4L2 API specification revision 0.24 is the base for this test environment. The most recent version can be found at http://v4l2spec.bytesex.org/spec/ .

Code Coverage

The code coverage shows which lines of the code were executed and how many times. The measurement results gives you a feedback about the quality of the test cases. You can measure the code coverage of a kernel module with the gocv and lcov softwares.

Current status

Currently all test are running and evaluated automatically. This might change in future if we want to test for example plugging and unplugging a USB video device or ask the user if a received picture make sense or not.

The following tables give an overview about the current state of implemented test cases.

V4L API element Covered? Note
V4L2 close() yes All
V4L2 ioctl() yes All
ioctl VIDIOC_CROPCAP yes, only when STREAM_OFF Opt.
ioctl VIDIOC_DBG_G_REGISTER no Exp.
ioctl VIDIOC_DBG_S_REGISTER no Exp.
ioctl VIDIOC_ENCODER_CMD no Exp.
ioctl VIDIOC_TRY_ENCODER_CMD no Exp.
ioctl VIDIOC_ENUMAUDIO yes, only when STREAM_OFF Enum.
ioctl VIDIOC_ENUMAUDOUT yes, only when STREAM_OFF Enum.
ioctl VIDIOC_ENUM_FMT yes, only when STREAM_OFF Enum.
ioctl VIDIOC_ENUM_FRAMESIZES yes, only when STREAM_OFF Exp. Enum.
ioctl VIDIOC_ENUM_FRAMEINTERVALS no Exp. Enum.
ioctl VIDIOC_ENUMINPUT yes, only when STREAM_OFF Enum.
ioctl VIDIOC_ENUMOUTPUT yes, only when STREAM_OFF Enum.
ioctl VIDIOC_ENUMSTD yes, only when STREAM_OFF Enum.
ioctl VIDIOC_G_AUDIO yes, only when STREAM_OFF Opt.
ioctl VIDIOC_S_AUDIO yes, only when STREAM_OFF Opt.
ioctl VIDIOC_G_AUDOUT yes, only when STREAM_OFF Opt.
ioctl VIDIOC_S_AUDOUT yes, only when STREAM_OFF Opt.
ioctl VIDIOC_G_CHIP_IDENT no Exp.
ioctl VIDIOC_G_CROP yes, only when STREAM_OFF Opt.
ioctl VIDIOC_S_CROP yes, only when STREAM_OFF Opt.
ioctl VIDIOC_G_CTRL yes, only when STREAM_OFF
ioctl VIDIOC_S_CTRL yes, only when STREAM_OFF
ioctl VIDIOC_G_ENC_INDEX no Exp.
ioctl VIDIOC_G_EXT_CTRLS yes, only when STREAM_OFF, currently only zero and one item Opt.
ioctl VIDIOC_S_EXT_CTRLS yes, only when STREAM_OFF, only with zero item Opt.
ioctl VIDIOC_TRY_EXT_CTRLS yes, only when STREAM_OFF, only with zero item Opt.
ioctl VIDIOC_G_FBUF no Opt.
ioctl VIDIOC_S_FBUF no Opt.
ioctl VIDIOC_G_FMT yes, only when STREAM_OFF Opt.
ioctl VIDIOC_S_FMT yes, only when STREAM_OFF Opt.
ioctl VIDIOC_TRY_FMT no Opt.
ioctl VIDIOC_G_FREQUENCY yes, only when STREAM_OFF Opt.
ioctl VIDIOC_S_FREQUENCY yes, only when STREAM_OFF Opt.
ioctl VIDIOC_G_INPUT yes, only when STREAM_OFF Opt.
ioctl VIDIOC_S_INPUT yes, only when STREAM_OFF Opt.
ioctl VIDIOC_G_JPEGCOMP yes, only when STREAM_OFF Opt.
ioctl VIDIOC_S_JPEGCOMP no Opt.
ioctl VIDIOC_G_MODULATOR yes, only when STREAM_OFF Opt.
ioctl VIDIOC_S_MODULATOR no Opt.
ioctl VIDIOC_G_OUTPUT yes, only when STREAM_OFF Opt.
ioctl VIDIOC_S_OUTPUT yes, only when STREAM_OFF Opt.
ioctl VIDIOC_G_PARM yes, only when STREAM_OFF Opt.
ioctl VIDIOC_S_PARM no Opt.
ioctl VIDIOC_G_PRIORITY yes, only when STREAM_OFF Opt.
ioctl VIDIOC_S_PRIORITY yes, only when STREAM_OFF Opt.
ioctl VIDIOC_G_SLICED_VBI_CAP yes, only when STREAM_OFF Opt.
ioctl VIDIOC_G_STD yes, only when STREAM_OFF Opt.
ioctl VIDIOC_S_STD yes, only when STREAM_OFF Opt.
ioctl VIDIOC_G_TUNER yes, only when STREAM_OFF
ioctl VIDIOC_S_TUNER yes, only when STREAM_OFF
ioctl VIDIOC_LOG_STATUS yes, only when STREAM_OFF Opt.
ioctl VIDIOC_OVERLAY no Opt.
ioctl VIDIOC_QBUF no Opt.
ioctl VIDIOC_DQBUF no Opt.
ioctl VIDIOC_QUERYBUF yes, only when STREAM_OFF Opt.
ioctl VIDIOC_QUERYCAP yes, only when STREAM_OFF All
ioctl VIDIOC_QUERYCTRL yes, only private and user controls; only user controls with V4L2_CTRL_FLAG_NEXT_CTRL Enum.
ioctl VIDIOC_QUERYMENU yes, only when STREAM_OFF Enum.
ioctl VIDIOC_QUERYSTD yes, only when STREAM_OFF Opt.
ioctl VIDIOC_REQBUFS yes, only when STREAM_OFF Opt.
ioctl VIDIOC_STREAMON no Opt.
ioctl VIDIOC_STREAMOFF no Opt.
V4L2 mmap() no Opt.
V4L2 munmap() no Opt.
V4L2 open() yes, partly All
V4L2 poll() no Opt.
V4L2 read() no Opt.
V4L2 select() no Opt.
V4L2 write() no Opt.

All: all drivers should support
Opt.: optional
Enum.: enumeration, will return EINVAL for the first unknown entry
Exp.: experimental, may change in future

The following actions are not part of the V4L2 API but they might have influence on the V4L2 API functions:

Action Covered?
Load kernel module no
Unload kernel module no
USB connect event (in case of USB webcams) no
USB disconnect event (in case of USB webcams) no
Suspend no
Resume no
Check for memory leak (e.g. analyze /proc/slab_allocators) no
Opening /dev/video0 multiple times no
Using /dev/video0 from a multi-threaded or multi-process environment paralell no

Similar projects

There migth be similar projects which also tries to test the V4L2 API. So far I could find the following:

Please let me know if this list misses other V4L or V4L2 test project.

The following documents and articles are useful if you are dealing with V4L2:

For USB or V4L loopback testing:

And what else can we read if we are looking for webcam test ideas:

Feedbacks

Any feedbacks, comments, ideas, etc. are welcome at the author's email address. You can find the email address in the source package in the README file.


Last changed: Thu Jul 23 06:47:49 CEST 2009

Valid HTML 4.01 Strict SourceForge.net Logo