Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 4 年多

通知 15
Star 8
Fork 2
K
kernel_linux
切换分支/标签
  1. 28 9月, 2015 1 次提交
  3. 26 9月, 2015 1 次提交
  5. 08 7月, 2015 1 次提交
    • S
      tracing: Have branch tracer use recursive field of task struct · 6224beb1
      由 Steven Rostedt (Red Hat) 提交于 
      Fengguang Wu's tests triggered a bug in the branch tracer's start up
test when CONFIG_DEBUG_PREEMPT set. This was because that config
adds some debug logic in the per cpu field, which calls back into
the branch tracer.

The branch tracer has its own recursive checks, but uses a per cpu
variable to implement it. If retrieving the per cpu variable calls
back into the branch tracer, you can see how things will break.

Instead of using a per cpu variable, use the trace_recursion field
of the current task struct. Simply set a bit when entering the
branch tracing and clear it when leaving. If the bit is set on
entry, just don't do the tracing.

There's also the case with lockdep, as the local_irq_save() called
before the recursion can also trigger code that can call back into
the function. Changing that to a raw_local_irq_save() will protect
that as well.

This prevents the recursion and the inevitable crash that follows.

Link: http://lkml.kernel.org/r/20150630141803.GA28071@wfg-t540p.sh.intel.com

Cc: stable@vger.kernel.org # 3.10+
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Tested-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      6224beb1
  7. 26 6月, 2015 1 次提交
  9. 14 5月, 2015 4 次提交
  11. 08 4月, 2015 1 次提交
    • S
      tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values · 0c564a53
      由 Steven Rostedt (Red Hat) 提交于 
      Several tracepoints use the helper functions __print_symbolic() or
__print_flags() and pass in enums that do the mapping between the
binary data stored and the value to print. This works well for reading
the ASCII trace files, but when the data is read via userspace tools
such as perf and trace-cmd, the conversion of the binary value to a
human string format is lost if an enum is used, as userspace does not
have access to what the ENUM is.

For example, the tracepoint trace_tlb_flush() has:

 __print_symbolic(REC->reason,
    { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" },
    { TLB_REMOTE_SHOOTDOWN, "remote shootdown" },
    { TLB_LOCAL_SHOOTDOWN, "local shootdown" },
    { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" })

Which maps the enum values to the strings they represent. But perf and
trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would
not be able to map it.

With TRACE_DEFINE_ENUM(), developers can place these in the event header
files and ftrace will convert the enums to their values:

By adding:

 TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH);
 TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN);
 TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN);
 TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN);

 $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format
[...]
 __print_symbolic(REC->reason,
    { 0, "flush on task switch" },
    { 1, "remote shootdown" },
    { 2, "local shootdown" },
    { 3, "local mm shootdown" })

The above is what userspace expects to see, and tools do not need to
be modified to parse them.

Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org

Cc: Guilherme Cox <cox@computer.org>
Cc: Tony Luck <tony.luck@gmail.com>
Cc: Xie XiuQi <xiexiuqi@huawei.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      0c564a53
  13. 04 2月, 2015 1 次提交
    • S
      tracing: Convert the tracing facility over to use tracefs · 8434dc93
      由 Steven Rostedt (Red Hat) 提交于 
      debugfs was fine for the tracing facility as a quick way to get
an interface. Now that tracing has matured, it should separate itself
from debugfs such that it can be mounted separately without needing
to mount all of debugfs with it. That is, users resist using tracing
because it requires mounting debugfs. Having tracing have its own file
system lets users get the features of tracing without needing to bring
in the rest of the kernel's debug infrastructure.

Another reason for tracefs is that debubfs does not support mkdir.
Currently, to create instances, one does a mkdir in the tracing/instance
directory. This is implemented via a hack that forces debugfs to do
something it is not intended on doing. By converting over to tracefs, this
hack can be removed and mkdir can be properly implemented. This patch does
not address this yet, but it lays the ground work for that to be done.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      8434dc93
  15. 02 2月, 2015 1 次提交
  17. 23 12月, 2014 1 次提交
  19. 15 12月, 2014 2 次提交
  21. 04 12月, 2014 1 次提交
    • B
      tracing: Add additional marks to signal very large time deltas · 8e1e1df2
      由 Byungchul Park 提交于 
      Currently, function graph tracer prints "!" or "+" just before
function execution time to signal a function overhead, depending
on the time. And some tracers tracing latency also print "!" or
"+" just after time to signal overhead, depending on the interval
between events. Even it is usually enough to do that, we sometimes
need to signal for bigger execution time than 100 micro seconds.

For example, I used function graph tracer to detect if there is
any case that exit_mm() takes too much time. I did following steps
in /sys/kernel/debug/tracing. It was easier to detect very large
excution time with patched kernel than with original kernel.

$ echo exit_mm > set_graph_function
$ echo function_graph > current_tracer
$ echo > trace
$ cat trace_pipe > $LOGFILE
 ... (do something and terminate logging)
$ grep "\\$" $LOGFILE
 3) $ 22082032 us |                      } /* kernel_map_pages */
 3) $ 22082040 us |                    } /* free_pages_prepare */
 3) $ 22082113 us |                  } /* free_hot_cold_page */
 3) $ 22083455 us |                } /* free_hot_cold_page_list */
 3) $ 22083895 us |              } /* release_pages */
 3) $ 22177873 us |            } /* free_pages_and_swap_cache */
 3) $ 22178929 us |          } /* unmap_single_vma */
 3) $ 22198885 us |        } /* unmap_vmas */
 3) $ 22206949 us |      } /* exit_mmap */
 3) $ 22207659 us |    } /* mmput */
 3) $ 22207793 us |  } /* exit_mm */

And then, it was easy to find out that a schedule-out occured by
sub_preempt_count() within kernel_map_pages().

To detect very large function exection time caused by either problematic
function implementation or scheduling issues, this patch can be useful.

Link: http://lkml.kernel.org/r/1416789259-24038-1-git-send-email-byungchul.park@lge.comSigned-off-by: NByungchul Park <byungchul.park@lge.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      8e1e1df2
  23. 20 11月, 2014 2 次提交
  25. 12 11月, 2014 2 次提交
  27. 19 7月, 2014 1 次提交
  29. 11 6月, 2014 1 次提交
  31. 06 6月, 2014 1 次提交
  33. 21 5月, 2014 2 次提交
  35. 30 4月, 2014 1 次提交
  37. 25 4月, 2014 1 次提交
  39. 22 4月, 2014 3 次提交
  41. 08 4月, 2014 1 次提交
  43. 21 2月, 2014 6 次提交
  45. 03 1月, 2014 2 次提交
  47. 22 12月, 2013 2 次提交
    • T
      tracing: Add and use generic set_trigger_filter() implementation · bac5fb97
      由 Tom Zanussi 提交于 
      Add a generic event_command.set_trigger_filter() op implementation and
have the current set of trigger commands use it - this essentially
gives them all support for filters.

Syntactically, filters are supported by adding 'if <filter>' just
after the command, in which case only events matching the filter will
invoke the trigger.  For example, to add a filter to an
enable/disable_event command:

    echo 'enable_event:system:event if common_pid == 999' > \
              .../othersys/otherevent/trigger

The above command will only enable the system:event event if the
common_pid field in the othersys:otherevent event is 999.

As another example, to add a filter to a stacktrace command:

    echo 'stacktrace if common_pid == 999' > \
                   .../somesys/someevent/trigger

The above command will only trigger a stacktrace if the common_pid
field in the event is 999.

The filter syntax is the same as that described in the 'Event
filtering' section of Documentation/trace/events.txt.

Because triggers can now use filters, the trigger-invoking logic needs
to be moved in those cases - e.g. for ftrace_raw_event_calls, if a
trigger has a filter associated with it, the trigger invocation now
needs to happen after the { assign; } part of the call, in order for
the trigger condition to be tested.

There's still a SOFT_DISABLED-only check at the top of e.g. the
ftrace_raw_events function, so when an event is soft disabled but not
because of the presence of a trigger, the original SOFT_DISABLED
behavior remains unchanged.

There's also a bit of trickiness in that some triggers need to avoid
being invoked while an event is currently in the process of being
logged, since the trigger may itself log data into the trace buffer.
Thus we make sure the current event is committed before invoking those
triggers.  To do that, we split the trigger invocation in two - the
first part (event_triggers_call()) checks the filter using the current
trace record; if a command has the post_trigger flag set, it sets a
bit for itself in the return value, otherwise it directly invoks the
trigger.  Once all commands have been either invoked or set their
return flag, event_triggers_call() returns.  The current record is
then either committed or discarded; if any commands have deferred
their triggers, those commands are finally invoked following the close
of the current event by event_triggers_post_call().

To simplify the above and make it more efficient, the TRIGGER_COND bit
is introduced, which is set only if a soft-disabled trigger needs to
use the log record for filter testing or needs to wait until the
current log record is closed.

The syscall event invocation code is also changed in analogous ways.

Because event triggers need to be able to create and free filters,
this also adds a couple external wrappers for the existing
create_filter and free_filter functions, which are too generic to be
made extern functions themselves.

Link: http://lkml.kernel.org/r/7164930759d8719ef460357f143d995406e4eead.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      bac5fb97
    • T
      tracing: Add 'enable_event' and 'disable_event' event trigger commands · 7862ad18
      由 Tom Zanussi 提交于 
      Add 'enable_event' and 'disable_event' event_command commands.

enable_event and disable_event event triggers are added by the user
via these commands in a similar way and using practically the same
syntax as the analagous 'enable_event' and 'disable_event' ftrace
function commands, but instead of writing to the set_ftrace_filter
file, the enable_event and disable_event triggers are written to the
per-event 'trigger' files:

    echo 'enable_event:system:event' > .../othersys/otherevent/trigger
    echo 'disable_event:system:event' > .../othersys/otherevent/trigger

The above commands will enable or disable the 'system:event' trace
events whenever the othersys:otherevent events are hit.

This also adds a 'count' version that limits the number of times the
command will be invoked:

    echo 'enable_event:system:event:N' > .../othersys/otherevent/trigger
    echo 'disable_event:system:event:N' > .../othersys/otherevent/trigger

Where N is the number of times the command will be invoked.

The above commands will will enable or disable the 'system:event'
trace events whenever the othersys:otherevent events are hit, but only
N times.

This also makes the find_event_file() helper function extern, since
it's useful to use from other places, such as the event triggers code,
so make it accessible.

Link: http://lkml.kernel.org/r/f825f3048c3f6b026ee37ae5825f9fc373451828.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      7862ad18