If the lookup of a listening ID failed for an AF_IB request, the code
would try to call dev_put() on a NULL net_dev.

Fixes: be688195 ("IB/cma: Fix net_dev reference leak with failed
requests")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When using ifup/ifdown while executing enum_netdev_ipv4_ips,
ifa could become invalid and cause use after free error.
Fixing it by protecting with RCU lock.

Fixes: 03db3a2d ('IB/core: Add RoCE GID table management')
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When ib_cache_gid_set_default_gid is called from several threads,
updating the table could make find_gid fail, therefore a negative
index will be retruned and an invalid table entry will be used.
Locking find_gid as well fixes this problem.

Fixes: 03db3a2d ('IB/core: Add RoCE GID table management')
Signed-off-by: NDoron Tsur <doront@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The netdev checks recently added to RDMA CM expect a valid netdev to be
found for both InfiniBand and RoCE, but the code that find a netdev is
only implemented for InfiniBand.

Currently RoCE doesn't provide an API to find the netdev matching a
given set of parameters, so this patch just disables the netdev enforcement
for each incoming connections when the link layer is RoCE.

Fixes: 4c21b5bc ("IB/cma: Add net_dev and private data checks to RDMA CM")
Reported-by: NKamal Heib <kamalh@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We have many WR opcodes that are only supported in kernel space
and/or require optional information to be copied into the WR
structure.  Reject all those not explicitly handled so that we
can't pass invalid information to drivers.

Cc: stable@vger.kernel.org
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The flags to ibnl_put_msg should be NLM_F_REQUEST instead of GFP_KERNEL.
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NJohn Fleck <john.fleck@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Currently, IB/cma remove_one flow blocks until all user descriptor managed by
IB/ucma are released. This prevents hot-removal of IB devices. This patch
allows IB/cma to remove devices regardless of user space activity. Upon getting
the RDMA_CM_EVENT_DEVICE_REMOVAL event we close all the underlying HW resources
for the given ucontext. The ucontext itself is still alive till its explicit
destroying by its creator.

Running applications at that time will have some zombie device, further
operations may fail.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Reviewed-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Enables the uverbs_remove_one to succeed despite the fact that there are
running IB applications working with the given ib device.  This
functionality enables a HW device to be unbind/reset despite the fact that
there are running user space applications using it.

It exposes a new IB kernel API named 'disassociate_ucontext' which lets
a driver detaching its HW resources from a given user context without
crashing/terminating the application. In case a driver implemented the
above API and registered with ib_uverb there will be no dependency between its
device to its uverbs_device. Upon calling remove_one of ib_uverbs the call
should return after disassociating the open HW resources without waiting to
clients disconnecting. In case driver didn't implement this API there will be no
change to current behaviour and uverbs_remove_one will return only when last
client has disconnected and reference count on uverbs device became 0.

In case the lower driver device was removed any application will
continue working over some zombie HCA, further calls will ended with an
immediate error.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Done in preparation for deploying RCU for the device removal
flow. Allows isolating the RCU handling to the uverb_main layer and
keeping the uverbs_cmd code as is.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fixes: 2a72f212 ("IB/uverbs: Remove dev_table")

Before this commit there was a device look-up table that was protected
by a spin_lock used by ib_uverbs_open and by ib_uverbs_remove_one. When
it was dropped and container_of was used instead, it enabled the race
with remove_one as dev might be freed just after:
dev = container_of(inode->i_cdev, struct ib_uverbs_device, cdev) but
before the kref_get.

In addition, this buggy patch added some dead code as
container_of(x,y,z) can never be NULL and so dev can never be NULL.
As a result the comment above ib_uverbs_open saying "the open method
will either immediately run -ENXIO" is wrong as it can never happen.

The solution follows Jason Gunthorpe suggestion from below URL:
https://www.mail-archive.com/linux-rdma@vger.kernel.org/msg25692.html

cdev will hold a kref on the parent (the containing structure,
ib_uverbs_device) and only when that kref is released it is
guaranteed that open will never be called again.

In addition, fixes the active count scheme to use an atomic
not a kref to prevent WARN_ON as pointed by above comment
from Jason.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fix the reference counting usage to be handled in the event file
creation/destruction function, instead of being done by the caller.
This is done for both async/non-async event files.

Based on Jason Gunthorpe report at https://www.mail-archive.com/
linux-rdma@vger.kernel.org/msg24680.html:
"The existing code for this is broken, in ib_uverbs_get_context all
the error paths between ib_uverbs_alloc_event_file and the
kref_get(file->ref) are wrong - this will result in fput() which will
call ib_uverbs_event_close, which will try to do kref_put and
ib_unregister_event_handler - which are no longer paired."
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The majority of callers never check the return value, and even if they
did, they can't do anything about a failure.

All possible failure cases represent a bug in the caller, so just
WARN_ON inside the function instead.

This fixes a few random errors:
 net/rd/iw.c infinite loops while it fails. (racing with EBUSY?)

This also lays the ground work to get rid of error return from the
drivers. Most drivers do not error, the few that do are broken since
it cannot be handled.

Since uverbs can legitimately make use of EBUSY, open code the
check.
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The pd now has a local_dma_lkey member which completely replaces
ib_get_dma_mr, use it instead.
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Every single ULP requires a local_dma_lkey to do anything with
a QP, so let us ensure one exists for every PD created.

If the driver can supply a global local_dma_lkey then use that, otherwise
ask the driver to create a local use all physical memory MR associated
with the new PD.
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NSagi Grimberg <sagig@dev.mellanox.co.il>
Acked-by: NChristoph Hellwig <hch@infradead.org>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Tested-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch routes a SA pathrecord query to netlink first and processes the
response appropriately. If a failure is returned, the request will be sent
through IB. The decision whether to route the request to netlink first is
determined by the presence of a listener for the local service netlink
multicast group. If the user-space local service netlink multicast group
listener is not present, the request will be sent through IB, just like
what is currently being done.
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NJohn Fleck <john.fleck@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Replace kmalloc with kzalloc so that all uninitialized fields in SA query
will be zero-ed out to avoid unintentional consequence. This prepares the
SA query structure to accept new fields in the future.
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NJohn Fleck <john.fleck@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds a function to check if listeners for a netlink multicast
group are present. It also adds a function to receive netlink response
messages.
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NJohn Fleck <john.fleck@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NDoug Ledford <dledford@redhat.com>

get_netdev: get the net_device on the physical port of the IB transport port. In
port aggregation mode it is required to return the netdev of the active port.

modify_gid: note for a change in the RoCE gid cache. Handle this by writing to
the harsware GID table. It is possible that indexes in cahce and hardware tables
won't match so a translation is required when modifying a QP or creating an
address handle.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Handling bonding and other devices require us to all all GIDs of the
net-devices which are upper-devices of the RoCE port related
net-device.

Active-backup configurations imposes even more challenges as the
default GID should only be set on the active devices (this is
necessary as otherwise the same MAC could be used for several
slaves and thus several slaves will have identical GIDs).

Managing these configurations are done by listening to:
(a) NETDEV_CHANGEUPPER event
	(1) if a related net-device is linked, delete all inactive
	    slaves default GIDs and add the upper device GIDs.
	(2) if a related net-device is unlinked, delete all upper GIDs
	    and add the default GIDs.
(b) NETDEV_BONDING_FAILOVER:
	(1) delete the bond GIDs from inactive slaves
	(2) delete the inactive slave's default GIDs
	(3) Add the bond GIDs to the active slave.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Smatch says that, based on the indenting, we should probably add curly
braces here.

Fixes: 03db3a2d ('IB/core: Add RoCE GID table management')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

RoCE GIDs are based on IP addresses configured on Ethernet net-devices
which relate to the RDMA (RoCE) device port.

Currently, each of the low-level drivers that support RoCE (ocrdma,
mlx4) manages its own RoCE port GID table. As there's nothing which is
essentially vendor specific, we generalize that, and enhance the RDMA
core GID cache to do this job.

In order to populate the GID table, we listen for events:

(a) netdev up/down/change_addr events - if a netdev is built onto
    our RoCE device, we need to add/delete its IPs. This involves
    adding all GIDs related to this ndev, add default GIDs, etc.

(b) inet events - add new GIDs (according to the IP addresses)
    to the table.

For programming the port RoCE GID table, providers must implement
the add_gid and del_gid callbacks.

RoCE GID management requires us to state the associated net_device
alongside the GID. This information is necessary in order to manage
the GID table. For example, when a net_device is removed, its
associated GIDs need to be removed as well.

RoCE mandates generating a default GID for each port, based on the
related net-device's IPv6 link local. In contrast to the GID based on
the regular IPv6 link-local (as we generate GID per IP address),
the default GID is also available when the net device is down (in
order to support loopback).

Locking is done as follows:
The patch modify the GID table code both for new RoCE drivers
implementing the add_gid/del_gid callbacks and for current RoCE and
IB drivers that do not. The flows for updating the table are
different, so the locking requirements are too.

While updating RoCE GID table, protection against multiple writers is
achieved via mutex_lock(&table->lock). Since writing to a table
requires us to find an entry (possible a free entry) in the table and
then modify it, this mutex protects both the find_gid and write_gid
ensuring the atomicity of the action.
Each entry in the GID cache is protected by rwlock. In RoCE, writing
(usually results from netdev notifier) involves invoking the vendor's
add_gid and del_gid callbacks, which could sleep.
Therefore, an invalid flag is added for each entry. Updates for RoCE are
done via a workqueue, thus sleeping is permitted.

In IB, updates are done in write_lock_irq(&device->cache.lock), thus
write_gid isn't allowed to sleep and add_gid/del_gid are not called.

When passing net-device into/out-of the GID cache, the device
is always passed held (dev_hold).

The code uses a single work item for updating all RDMA devices,
following a netdev or inet notifier.

The patch moves the cache from being a client (which was incorrect,
as the cache is part of the IB infrastructure) to being explicitly
initialized/freed when a device is registered/removed.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This gets rid of the weird in-between state where struct ib_device
was allocated but the kobject didn't work.

Consequently ib_device_release is now guaranteed to be called in
all situations and we needn't duplicate its kfrees on error paths.
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fully replaced by a more generic and suitable
ib_alloc_mr.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Use ib_alloc_mr with specific parameters.
Change the existing callers.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This was added in a thought of uniting all mr allocation
and deallocation routines but the fact is we have a single
deallocation routine already, ib_dereg_mr.

And, move mlx5_ib_destroy_mr specific logic into mlx5_ib_dereg_mr
(includes only signature stuff for now).

And, fixup the only callers (iser/isert) accordingly.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When no matching listening ID is found for a given request, the net_dev
that was used to find the request isn't released.

Fixes: 0b3ca768 ("IB/cma: Use found net_dev for passive connections")
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Now that there are no ib_cm clients using the compare_data feature for
matching IB CM requests' private data, remove the compare_data parameter of
ib_cm_listen and remove the code implementing the feature.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Use ib_cm_insert_listen to create listening IB CM IDs or share existing
ones if needed. When given a request on a specific CM ID, the code now
matches the request to the RDMA CM ID based on the request parameters, so
it no longer needs to rely on the ib_cm's private data matching
capabilities.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When receiving a new connection in cma_req_handler, we actually already
know the net_dev that is used for the connection's creation. Instead of
calling cma_translate_addr to resolve the new connection id's source
address, just use the net_dev that was found.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Pass incoming request parameters through the relevant IPv4/IPv6 routing
tables and make sure the network stack is configured to handle such
requests.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Instead of relying on a the ib_cm module to check an incoming CM request's
private data header, add these checks to the RDMA CM module. This allows a
following patch to to clean up the ib_cm interface and remove the code that
looks into the private headers. It will also allow supporting namespaces in
RDMA CM by making these checks namespace aware later on.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The rdma_cm module will later use the P_Key from the BTH to de-mux
requests.

See discussion at:
  http://www.spinics.net/lists/netdev/msg336067.html

Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Liran Liss <liranl@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add helper functions to access the IDRs by port-space and port number.

Pass around the port-space enum in cma.c instead of using pointers to
port-space IDRs.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NYotam Kenneth <yotamke@mellanox.com>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Signed-off-by: NGuy Shapiro <guysh@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When receiving a connection request, rdma_cm needs to associate the request
with a network device, in order to disambiguate requests. To do this, it
needs to know the request's destination IP. For this the module needs to
allow getting this information from the private data in the request packet,
instead of relying on the information already being in the listening RDMA
CM ID.

When creating a new incoming connection ID, the code in
cma_save_ip{4,6}_info can no longer rely on the listener's private data to
find the port number, so it reads it from the requested service ID.
Signed-off-by: NGuy Shapiro <guysh@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NYotam Kenneth <yotamke@mellanox.com>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Enabling network namespaces for RDMA CM will allow processes on different
namespaces to listen on the same port. In order to leave namespace support
out of the CM layer, this requires that multiple RDMA CM IDs will be able
to share a single CM ID.

This patch adds infrastructure to retrieve an existing listening ib_cm_id,
based on its device and service ID, or create a new one if one does not
already exist. It also adds a reference count for such instances
(cm_id_private.listen_sharecount), and prevents cm_destroy_id from
destroying a CM if it is still shared. See the relevant discussion [1].

[1] Re: [PATCH v3 for-next 05/13] IB/cm: Reference count ib_cm_ids
    http://www.spinics.net/lists/netdev/msg328860.htmlReviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Expose the service ID on an incoming CM or SIDR request to the event
handler. This will allow the RDMA CM module to de-multiplex connection
requests based on the information encoded in the service ID.
Acked-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In the case of IPoIB, and maybe in other cases, the network device is
managed by an upper-layer protocol (ULP). In order to expose this
network device to other users of the IB device, let ULPs implement
a callback that returns network device according to connection parameters.

The IB device and port, together with the P_Key and the GID should
be enough to uniquely identify the ULP net device. However, in current
kernels there can be multiple IPoIB interfaces created with the same GID.
Furthermore, such configuration may be desireable to support ipvlan-like
configurations for RDMA CM with IPoIB.  To resolve the device in these
cases the code will also take the IP address as an additional input.
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NYotam Kenneth <yotamke@mellanox.com>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Signed-off-by: NGuy Shapiro <guysh@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

An ib_client callback that is called with the lists_rwsem locked only for
read is protected from changes to the IB client lists, but not from
ib_unregister_device() freeing its client data. This is because
ib_unregister_device() will remove the device from the device list with
lists_rwsem locked for write, but perform the rest of the cleanup,
including the call to remove() without that lock.

Mark client data that is undergoing de-registration with a new going_down
flag in the client data context. Lock the client data list with lists_rwsem
for write in addition to using the spinlock, so that functions calling the
callback would be able to lock only lists_rwsem for read and let callbacks
sleep.

Since ib_unregister_client() now marks the client data context, no need for
remove() to search the context again, so pass the client data directly to
remove() callbacks.
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Currently the RDMA subsystem's device list and client list are protected by
a single mutex. This prevents adding user-facing APIs that iterate these
lists, since using them may cause a deadlock. The patch attempts to solve
this problem by adding a read-write semaphore to protect the lists. Readers
now don't need the mutex, and are safe just by read-locking the semaphore.

The ib_register_device, ib_register_client, ib_unregister_device, and
ib_unregister_client functions are modified to lock the semaphore for write
during their respective list modification. Also, in order to make sure
client callbacks are called only between add() and remove() calls, the code
is changed to only add items to the lists after the add() calls and remove
from the lists before the remove() calls.

This patch attempts to solve a similar need [1] that was seen in the RoCE
v2 patch series.

[1] http://www.spinics.net/lists/linux-rdma/msg24733.htmlReviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Matan Barak <matanb@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>