The compiler can generate slightly smaller and simpler code when it
knows that "nbits" is non-negative.  Since no-one passes a negative
bit-count, this shouldn't affect the semantics.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The compiler can generate slightly smaller and simpler code when it
knows that "nbits" is non-negative.  Since no-one passes a negative
bit-count, this shouldn't affect the semantics.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The compiler can generate slightly smaller and simpler code when it
knows that "nbits" is non-negative.  Since no-one passes a negative
bit-count, this shouldn't affect the semantics.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Many functions in lib/bitmap.c start with an expression such as lim =
bits/BITS_PER_LONG.  Since bits has type (signed) int, and since gcc
cannot know that it is in fact non-negative, it generates worse code
than it could.  These patches, mostly consisting of changing various
parameters to unsigned, gives a slight overall code reduction:

  add/remove: 1/1 grow/shrink: 8/16 up/down: 251/-414 (-163)
  function                                     old     new   delta
  tick_device_uses_broadcast                   335     425     +90
  __irq_alloc_descs                            498     554     +56
  __bitmap_andnot                               73     115     +42
  __bitmap_and                                  70     101     +31
  bitmap_weight                                  -      11     +11
  copy_hugetlb_page_range                      752     762     +10
  follow_hugetlb_page                          846     854      +8
  hugetlb_init                                1415    1417      +2
  hugetlb_nrpages_setup                        130     131      +1
  hugetlb_add_hstate                           377     376      -1
  bitmap_allocate_region                        82      80      -2
  select_task_rq_fair                         2202    2191     -11
  hweight_long                                  66      55     -11
  __reg_op                                     230     219     -11
  dm_stats_message                            2849    2833     -16
  bitmap_parselist                              92      74     -18
  __bitmap_weight                              115      97     -18
  __bitmap_subset                              153     129     -24
  __bitmap_full                                128     104     -24
  __bitmap_empty                               120      96     -24
  bitmap_set                                   179     149     -30
  bitmap_clear                                 185     155     -30
  __bitmap_equal                               136     105     -31
  __bitmap_intersects                          148     108     -40
  __bitmap_complement                          109      67     -42
  tick_device_setup_broadcast_func.isra         81       -     -81

[The increases in __bitmap_and{,not} are due to bug fixes 17/18,18/18.
No idea why bitmap_weight suddenly appears.] While 163 bytes treewide is
insignificant, I believe the bitmap functions are often called with
locks held, so saving even a few cycles might be worth it.

While making these changes, I found a few other things that might be
worth including.  16,17,18 are actual bug fixes.  The rest shouldn't
change the behaviour of any of the functions, provided no-one passed
negative nbits values.  If something should come up, it should be fairly
bisectable.

A few issues I thought about, but didn't know what to do with:

* Many of the functions misbehave if nbits is compile-time 0; the
  out-of-line functions generally handle 0 correctly.  bitmap_fill() is
  particularly bad, whether the 0 is known at compile time or not.  It
  would probably be nice to add detection of at least compile-time 0 and
  handle that appropriately.

* I didn't change __bitmap_shift_{left,right} to use unsigned because I
  want to fully understand why the algorithm works before making that
  change.  However, AFAICT, they behave correctly for all (positive) shift
  amounts.  This is not the case for the small_const_nbits versions.  If
  for example nbits = n = BITS_PER_LONG, the shift operators turn into
  no-ops (at least on x86), so one get *dst = *src, whereas one would
  expect to get *dst=0.  That difference in behaviour is somewhat
  annoying.

This patch (of 18):

The compiler can generate slightly smaller and simpler code when it
knows that "nbits" is non-negative.  Since no-one passes a negative
bit-count, this shouldn't affect the semantics.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's been nearly 3 years now since commit 55036ba7 ("lib: rename
pack_hex_byte() to hex_byte_pack()") so it's time to remove this
deprecated and unused static inline.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a helper function from drivers/ata/libata_core.c, where it is
used to blacklist particular device models.  It's being moved to lib/ so
other drivers may use it for the same purpose.

This implementation in non-recursive, so is safe for the kernel stack.

[akpm@linux-foundation.org: fix sparse warning]
Signed-off-by: NGeorge Spelvin <linux@horizon.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cleanup unused `if 0'-ed functions, which have been dead since 2006
(commits 87c2ce3b ("lib/zlib*: cleanups") by Adrian Bunk and
4f3865fb ("zlib_inflate: Upgrade library code to a recent version")
by Richard Purdie):

 - zlib_deflateSetDictionary
 - zlib_deflateParams
 - zlib_deflateCopy
 - zlib_inflateSync
 - zlib_syncsearch
 - zlib_inflateSetDictionary
 - zlib_inflatePrime
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The name was modified from hlist_add_after() to hlist_add_behind() when
adjusting the order of arguments to match the one with
klist_add_after().  This is necessary to break old code when it would
use it the wrong way.

Make klist follow this naming scheme for consistency.
Signed-off-by: NKen Helias <kenhelias@firemail.de>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All other add functions for lists have the new item as first argument
and the position where it is added as second argument.  This was changed
for no good reason in this function and makes using it unnecessary
confusing.

The name was changed to hlist_add_behind() to cause unconverted code to
generate a compile error instead of using the wrong parameter order.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NKen Helias <kenhelias@firemail.de>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>	[intel driver bits]
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The argument names for hlist_add_after() are poorly chosen because they
look the same as the ones for hlist_add_before() but have to be used
differently.

hlist_add_after_rcu() has made a better choice.
Signed-off-by: NKen Helias <kenhelias@firemail.de>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit a8fe19eb ("kernel/printk: use symbolic defines for console
loglevels") makes consistent use of symbolic values for printk() log
levels.

The naming scheme used is different from the one used for
DEFAULT_MESSAGE_LOGLEVEL though.  Change that symbol name to be
MESSAGE_LOGLEVEL_DEFAULT for consistency.  And because the value of that
symbol comes from a similarly-named config option, rename
CONFIG_DEFAULT_MESSAGE_LOGLEVEL as well.
Signed-off-by: NAlex Elder <elder@linaro.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jan Kara <jack@suse.cz>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NGeoff Levand <geoff@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The DEFINE_SIMPLE_ATTRIBUTE macro should not end in a ; Fix the one use
in the kernel tree that did not have a semicolon.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NLuca Tettamanti <kronos.it@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add zpool api.

zpool provides an interface for memory storage, typically of compressed
memory.  Users can select what backend to use; currently the only
implementations are zbud, a low density implementation with up to two
compressed pages per storage page, and zsmalloc, a higher density
implementation with multiple compressed pages per storage page.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Tested-by: NSeth Jennings <sjennings@variantweb.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Weijie Yang <weijie.yang@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change the type of the zbud_alloc() size param from unsigned int to
size_t.

Technically, this should not make any difference, as the zbud
implementation already restricts the size to well within either type's
limits; but as zsmalloc (and kmalloc) use size_t, and zpool will use
size_t, this brings the size parameter type in line with zsmalloc/zpool.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Acked-by: NSeth Jennings <sjennings@variantweb.net>
Tested-by: NSeth Jennings <sjennings@variantweb.net>
Cc: Weijie Yang <weijie.yang@samsung.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When kernel device drivers or subsystems want to bind their lifespan to
t= he lifespan of the mm_struct, they usually use one of the following
methods:

1. Manually calling a function in the interested kernel module.  The
   funct= ion call needs to be placed in mmput.  This method was rejected
   by several ker= nel maintainers.

2. Registering to the mmu notifier release mechanism.

The problem with the latter approach is that the mmu_notifier_release
cal= lback is called from__mmu_notifier_release (called from exit_mmap).
That functi= on iterates over the list of mmu notifiers and don't expect
the release call= back function to remove itself from the list.
Therefore, the callback function= in the kernel module can't release the
mmu_notifier_object, which is actuall= y the kernel module's object
itself.  As a result, the destruction of the kernel module's object must
to be done in a delayed fashion.

This patch adds support for this delayed callback, by adding a new
mmu_notifier_call_srcu function that receives a function ptr and calls
th= at function with call_srcu.  In that function, the kernel module
releases its object.  To use mmu_notifier_call_srcu, the calling module
needs to call b= efore that a new function called
mmu_notifier_unregister_no_release that as its= name implies,
unregisters a notifier without calling its notifier release call= back.

This patch also adds a function that will call barrier_srcu so those
kern= el modules can sync with mmu_notifier.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Signed-off-by: NOded Gabbay <oded.gabbay@amd.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__kmap_atomic_idx is per_cpu variable.  Each CPU can use KM_TYPE_NR
entries from FIXMAP i.e.  from 0 to KM_TYPE_NR - 1.  Allowing
__kmap_atomic_idx to over- shoot to KM_TYPE_NR can mess up with next
CPU's 0th entry which is a bug.  Hence BUG_ON if __kmap_atomic_idx >=
KM_TYPE_NR.

Fix the off-by-on in this test.
Signed-off-by: NChintan Pandya <cpandya@codeaurora.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

try_set_zonelist_oom() and clear_zonelist_oom() are not named properly
to imply that they require locking semantics to avoid out_of_memory()
being reordered.

zone_scan_lock is required for both functions to ensure that there is
proper locking synchronization.

Rename try_set_zonelist_oom() to oom_zonelist_trylock() and rename
clear_zonelist_oom() to oom_zonelist_unlock() to imply there is proper
locking semantics.

At the same time, convert oom_zonelist_trylock() to return bool instead
of int since only success and failure are tested.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With memoryless node support being worked on, it's possible that for
optimizations that a node may not have a non-NULL zonelist.  When
CONFIG_NUMA is enabled and node 0 is memoryless, this means the zonelist
for first_online_node may become NULL.

The oom killer requires a zonelist that includes all memory zones for
the sysrq trigger and pagefault out of memory handler.

Ensure that a non-NULL zonelist is always passed to the oom killer.

[akpm@linux-foundation.org: fix non-numa build]
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This series of patches fixes a problem when adding memory in bad manner.
For example: for a x86_64 machine booted with "mem=400M" and with 2GiB
memory installed, following commands cause problem:

  # echo 0x40000000 > /sys/devices/system/memory/probe
 [   28.613895] init_memory_mapping: [mem 0x40000000-0x47ffffff]
  # echo 0x48000000 > /sys/devices/system/memory/probe
 [   28.693675] init_memory_mapping: [mem 0x48000000-0x4fffffff]
  # echo online_movable > /sys/devices/system/memory/memory9/state
  # echo 0x50000000 > /sys/devices/system/memory/probe
 [   29.084090] init_memory_mapping: [mem 0x50000000-0x57ffffff]
  # echo 0x58000000 > /sys/devices/system/memory/probe
 [   29.151880] init_memory_mapping: [mem 0x58000000-0x5fffffff]
  # echo online_movable > /sys/devices/system/memory/memory11/state
  # echo online> /sys/devices/system/memory/memory8/state
  # echo online> /sys/devices/system/memory/memory10/state
  # echo offline> /sys/devices/system/memory/memory9/state
 [   30.558819] Offlined Pages 32768
  # free
              total       used       free     shared    buffers     cached
 Mem:        780588 18014398509432020     830552          0          0      51180
 -/+ buffers/cache: 18014398509380840     881732
 Swap:            0          0          0

This is because the above commands probe higher memory after online a
section with online_movable, which causes ZONE_HIGHMEM (or ZONE_NORMAL
for systems without ZONE_HIGHMEM) overlaps ZONE_MOVABLE.

After the second online_movable, the problem can be observed from
zoneinfo:

  # cat /proc/zoneinfo
  ...
  Node 0, zone  Movable
    pages free     65491
          min      250
          low      312
          high     375
          scanned  0
          spanned  18446744073709518848
          present  65536
          managed  65536
  ...

This series of patches solve the problem by checking ZONE_MOVABLE when
choosing zone for new memory.  If new memory is inside or higher than
ZONE_MOVABLE, makes it go there instead.

After applying this series of patches, following are free and zoneinfo
result (after offlining memory9):

  bash-4.2# free
                total       used       free     shared    buffers     cached
   Mem:        780956      80112     700844          0          0      51180
   -/+ buffers/cache:      28932     752024
   Swap:            0          0          0

  bash-4.2# cat /proc/zoneinfo

  Node 0, zone      DMA
    pages free     3389
          min      14
          low      17
          high     21
          scanned  0
          spanned  4095
          present  3998
          managed  3977
      nr_free_pages 3389
  ...
    start_pfn:         1
    inactive_ratio:    1
  Node 0, zone    DMA32
    pages free     73724
          min      341
          low      426
          high     511
          scanned  0
          spanned  98304
          present  98304
          managed  92958
      nr_free_pages 73724
    ...
    start_pfn:         4096
    inactive_ratio:    1
  Node 0, zone   Normal
    pages free     32630
          min      120
          low      150
          high     180
          scanned  0
          spanned  32768
          present  32768
          managed  32768
      nr_free_pages 32630
  ...
    start_pfn:         262144
    inactive_ratio:    1
  Node 0, zone  Movable
    pages free     65476
          min      241
          low      301
          high     361
          scanned  0
          spanned  98304
          present  65536
          managed  65536
      nr_free_pages 65476
  ...
    start_pfn:         294912
    inactive_ratio:    1

This patch (of 7):

Introduce zone_for_memory() in arch independent code for
arch_add_memory() use.

Many arch_add_memory() function simply selects ZONE_HIGHMEM or
ZONE_NORMAL and add new memory into it.  However, with the existance of
ZONE_MOVABLE, the selection method should be carefully considered: if
new, higher memory is added after ZONE_MOVABLE is setup, the default
zone and ZONE_MOVABLE may overlap each other.

should_add_memory_movable() checks the status of ZONE_MOVABLE.  If it
has already contain memory, compare the address of new memory and
movable memory.  If new memory is higher than movable, it should be
added into ZONE_MOVABLE instead of default zone.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: "Mel Gorman" <mgorman@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a comment describing the circumstances in which
__lock_page_or_retry() will or will not release the mmap_sem when
returning 0.

Add comments to lock_page_or_retry()'s callers (filemap_fault(),
do_swap_page()) noting the impact on VM_FAULT_RETRY returns.

Add comments on up the call tree, particularly replacing the false "We
return with mmap_sem still held" comments.
Signed-off-by: NPaul Cassella <cassella@cray.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The fair zone allocation policy round-robins allocations between zones
within a node to avoid age inversion problems during reclaim.  If the
first allocation fails, the batch counts are reset and a second attempt
made before entering the slow path.

One assumption made with this scheme is that batches expire at roughly
the same time and the resets each time are justified.  This assumption
does not hold when zones reach their low watermark as the batches will
be consumed at uneven rates.  Allocation failure due to watermark
depletion result in additional zonelist scans for the reset and another
watermark check before hitting the slowpath.

On UMA, the benefit is negligible -- around 0.25%.  On 4-socket NUMA
machine it's variable due to the variability of measuring overhead with
the vmstat changes.  The system CPU overhead comparison looks like

          3.16.0-rc3  3.16.0-rc3  3.16.0-rc3
             vanilla   vmstat-v5 lowercost-v5
User          746.94      774.56      802.00
System      65336.22    32847.27    40852.33
Elapsed     27553.52    27415.04    27368.46

However it is worth noting that the overall benchmark still completed
faster and intuitively it makes sense to take as few passes as possible
through the zonelists.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

zone->pages_scanned is a write-intensive cache line during page reclaim
and it's also updated during page free.  Move the counter into vmstat to
take advantage of the per-cpu updates and do not update it in the free
paths unless necessary.

On a small UMA machine running tiobench the difference is marginal.  On
a 4-node machine the overhead is more noticable.  Note that automatic
NUMA balancing was disabled for this test as otherwise the system CPU
overhead is unpredictable.

          3.16.0-rc3  3.16.0-rc3  3.16.0-rc3
             vanillarearrange-v5   vmstat-v5
User          746.94      759.78      774.56
System      65336.22    58350.98    32847.27
Elapsed     27553.52    27282.02    27415.04

Note that the overhead reduction will vary depending on where exactly
pages are allocated and freed.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The arrangement of struct zone has changed over time and now it has
reached the point where there is some inappropriate sharing going on.
On x86-64 for example

o The zone->node field is shared with the zone lock and zone->node is
  accessed frequently from the page allocator due to the fair zone
  allocation policy.

o span_seqlock is almost never used by shares a line with free_area

o Some zone statistics share a cache line with the LRU lock so
  reclaim-intensive and allocator-intensive workloads can bounce the cache
  line on a stat update

This patch rearranges struct zone to put read-only and read-mostly
fields together and then splits the page allocator intensive fields, the
zone statistics and the page reclaim intensive fields into their own
cache lines.  Note that the type of lowmem_reserve changes due to the
watermark calculations being signed and avoiding a signed/unsigned
conversion there.

On the test configuration I used the overall size of struct zone shrunk
by one cache line.  On smaller machines, this is not likely to be
noticable.  However, on a 4-node NUMA machine running tiobench the
system CPU overhead is reduced by this patch.

          3.16.0-rc3  3.16.0-rc3
             vanillarearrange-v5r9
User          746.94      759.78
System      65336.22    58350.98
Elapsed     27553.52    27282.02
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently map_vm_area() takes (struct page *** pages) as third argument,
and after mapping, it moves (*pages) to point to (*pages +
nr_mappped_pages).

It looks like this kind of increment is useless to its caller these
days.  The callers don't care about the increments and actually they're
trying to avoid this by passing another copy to map_vm_area().

The caller can always guarantee all the pages can be mapped into vm_area
as specified in first argument and the caller only cares about whether
map_vm_area() fails or not.

This patch cleans up the pointer movement in map_vm_area() and updates
its callers accordingly.
Signed-off-by: NWANG Chao <chaowang@redhat.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 71e3aac0 ("thp: transparent hugepage core") adds
copy_pte_range prototype to huge_mm.h.  I'm not sure why (or if) this
function have been used outside of memory.c, but it currently isn't.
This patch makes copy_pte_range() static again.
Signed-off-by: NJerome Marchand <jmarchan@redhat.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

They are unnecessary: "zero" can be used in place of "hugetlb_zero" and
passing extra2 == NULL is equivalent to infinity.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Do we really need an exported alias for __SetPageReferenced()? Its
callers better know what they're doing, in which case the page would not
be already marked referenced.  Kill init_page_accessed(), just
__SetPageReferenced() inline.
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It was missing...

Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In original code, zone_movable_is_highmem() assumes ZONE_MOVABLE not
highmem if CONFIG_HAVE_MEMBLOCK_NODE_MAP is not set.  In online_pages,
it extracts pages from the previous zone before ZONE_MOVABLE.  Which is
logically inconsistent:

If HAVE_MEMBLOCK_NODE_MAP is turned off but HIGHMEM is on,
zone_movable_is_highmem() makes movable zone not highmem, but
online_pages() extracts pages from ZONE_HIGHMEM.

This inconsistency doesn't cause real problem currently, because all
architectures support online_pages also have HAVE_MEMBLOCK_NODE_MAP.
However, fixing it makes code clear, and also helps futher coding.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Zhang Zhen <zhangzhen@huawei.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- PAGEFLAG_FALSE only defines TEST, make it define SET and CLEAR as
  well, analogous to PAGEFLAG.

- Define TESTSETFLAG_FALSE, analogous to TESTSETFLAG.

- Define TESTSCFLAG_FALSE, analogous to TESTSCFLAG

- Make PG_mlocked accessors the same on both MMU and !MMU setups
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Conventionally, we put output param to the end of param list and put the
'base' ahead of 'size', but cma_declare_contiguous() doesn't look like
that, so change it.

Additionally, move down cma_areas reference code to the position where
it is really needed.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NMichal Nazarewicz <mina86@mina86.com>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Gleb Natapov <gleb@kernel.org>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, there are two users on CMA functionality, one is the DMA
subsystem and the other is the KVM on powerpc.  They have their own code
to manage CMA reserved area even if they looks really similar.  From my
guess, it is caused by some needs on bitmap management.  KVM side wants
to maintain bitmap not for 1 page, but for more size.  Eventually it use
bitmap where one bit represents 64 pages.

When I implement CMA related patches, I should change those two places
to apply my change and it seem to be painful to me.  I want to change
this situation and reduce future code management overhead through this
patch.

This change could also help developer who want to use CMA in their new
feature development, since they can use CMA easily without copying &
pasting this reserved area management code.

In previous patches, we have prepared some features to generalize CMA
reserved area management and now it's time to do it.  This patch moves
core functions to mm/cma.c and change DMA APIs to use these functions.

There is no functional change in DMA APIs.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NMichal Nazarewicz <mina86@mina86.com>
Acked-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Gleb Natapov <gleb@kernel.org>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In store_mem_state(), we have:

  ...
  334         else if (!strncmp(buf, "offline", min_t(int, count, 7)))
  335                 online_type = -1;
  ...
  355         case -1:
  356                 ret = device_offline(&mem->dev);
  357                 break;
  ...

Here, "offline" is hard coded as -1.

This patch does the following renaming:

 ONLINE_KEEP     ->  MMOP_ONLINE_KEEP
 ONLINE_KERNEL   ->  MMOP_ONLINE_KERNEL
 ONLINE_MOVABLE  ->  MMOP_ONLINE_MOVABLE

and introduces MMOP_OFFLINE = -1 to avoid hard coding.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Cc: Hu Tao <hutao@cn.fujitsu.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

memblock_set_bottom_up() is only called by __init
cmdline_parse_movable_node() and __init numa_init().
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Reviewed-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

alloc_pages_exact_nid() is only called by __meminit alloc_page_cgroup()
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 85816794 ("fanotify: Fix use after free for permission
events") introduced a double free issue for permission events which are
pending in group's notification queue while group is being destroyed.
These events are freed from fanotify_handle_event() but they are not
removed from groups notification queue and thus they get freed again
from fsnotify_flush_notify().

Fix the problem by removing permission events from notification queue
before freeing them if we skip processing access response.  Also expand
comments in fanotify_release() to explain group shutdown in detail.

Fixes: 85816794Signed-off-by: NJan Kara <jack@suse.cz>
Reported-by: NDouglas Leeder <douglas.leeder@sophos.com>
Tested-by: NDouglas Leeder <douglas.leeder@sophos.com>
Reported-by: NHeinrich Schuchard <xypron.glpk@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rename fsnotify_add_notify_event() to fsnotify_add_event() since the
"notify" part is duplicit.  Rename fsnotify_remove_notify_event() and
fsnotify_peek_notify_event() to fsnotify_remove_first_event() and
fsnotify_peek_first_event() respectively since "notify" part is duplicit
and they really look at the first event in the queue.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NJan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add SOF_TIMESTAMPING_TX_ACK, a request for a tstamp when the last byte
in the send() call is acknowledged. It implements the feature for TCP.

The timestamp is generated when the TCP socket cumulative ACK is moved
beyond the tracked seqno for the first time. The feature ignores SACK
and FACK, because those acknowledge the specific byte, but not
necessarily the entire contents of the buffer up to that byte.
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Kernel transmit latency is often incurred in the packet scheduler.
Introduce a new timestamp on transmission just before entering the
scheduler. When data travels through multiple devices (bonding,
tunneling, ...) each device will export an individual timestamp.
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>