Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 4 年多

通知 15
Star 8
Fork 2
K
kernel_linux
切换分支/标签
  1. 11 2月, 2015 1 次提交
  3. 15 12月, 2014 1 次提交
  5. 11 12月, 2014 1 次提交
    • P
      kernel: add panic_on_warn · 9e3961a0
      由 Prarit Bhargava 提交于 
      There have been several times where I have had to rebuild a kernel to
cause a panic when hitting a WARN() in the code in order to get a crash
dump from a system.  Sometimes this is easy to do, other times (such as
in the case of a remote admin) it is not trivial to send new images to
the user.

A much easier method would be a switch to change the WARN() over to a
panic.  This makes debugging easier in that I can now test the actual
image the WARN() was seen on and I do not have to engage in remote
debugging.

This patch adds a panic_on_warn kernel parameter and
/proc/sys/kernel/panic_on_warn calls panic() in the
warn_slowpath_common() path.  The function will still print out the
location of the warning.

An example of the panic_on_warn output:

The first line below is from the WARN_ON() to output the WARN_ON()'s
location.  After that the panic() output is displayed.

    WARNING: CPU: 30 PID: 11698 at /home/prarit/dummy_module/dummy-module.c:25 init_dummy+0x1f/0x30 [dummy_module]()
    Kernel panic - not syncing: panic_on_warn set ...

    CPU: 30 PID: 11698 Comm: insmod Tainted: G        W  OE  3.17.0+ #57
    Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.00.29.D696.1311111329 11/11/2013
     0000000000000000 000000008e3f87df ffff88080f093c38 ffffffff81665190
     0000000000000000 ffffffff818aea3d ffff88080f093cb8 ffffffff8165e2ec
     ffffffff00000008 ffff88080f093cc8 ffff88080f093c68 000000008e3f87df
    Call Trace:
     [<ffffffff81665190>] dump_stack+0x46/0x58
     [<ffffffff8165e2ec>] panic+0xd0/0x204
     [<ffffffffa038e05f>] ? init_dummy+0x1f/0x30 [dummy_module]
     [<ffffffff81076b90>] warn_slowpath_common+0xd0/0xd0
     [<ffffffffa038e040>] ? dummy_greetings+0x40/0x40 [dummy_module]
     [<ffffffff81076c8a>] warn_slowpath_null+0x1a/0x20
     [<ffffffffa038e05f>] init_dummy+0x1f/0x30 [dummy_module]
     [<ffffffff81002144>] do_one_initcall+0xd4/0x210
     [<ffffffff811b52c2>] ? __vunmap+0xc2/0x110
     [<ffffffff810f8889>] load_module+0x16a9/0x1b30
     [<ffffffff810f3d30>] ? store_uevent+0x70/0x70
     [<ffffffff810f49b9>] ? copy_module_from_fd.isra.44+0x129/0x180
     [<ffffffff810f8ec6>] SyS_finit_module+0xa6/0xd0
     [<ffffffff8166cf29>] system_call_fastpath+0x12/0x17

Successfully tested by me.

hpa said: There is another very valid use for this: many operators would
rather a machine shuts down than being potentially compromised either
functionally or security-wise.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Fabian Frederick <fabf@skynet.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9e3961a0
  7. 28 10月, 2014 1 次提交
    • K
      sched/fair: Fix division by zero sysctl_numa_balancing_scan_size · 64192658
      由 Kirill Tkhai 提交于 
      File /proc/sys/kernel/numa_balancing_scan_size_mb allows writing of zero.

This bash command reproduces problem:

$ while :; do echo 0 > /proc/sys/kernel/numa_balancing_scan_size_mb; \
	   echo 256 > /proc/sys/kernel/numa_balancing_scan_size_mb; done

	divide error: 0000 [#1] SMP
	Modules linked in:
	CPU: 0 PID: 24112 Comm: bash Not tainted 3.17.0+ #8
	Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
	task: ffff88013c852600 ti: ffff880037a68000 task.ti: ffff880037a68000
	RIP: 0010:[<ffffffff81074191>]  [<ffffffff81074191>] task_scan_min+0x21/0x50
	RSP: 0000:ffff880037a6bce0  EFLAGS: 00010246
	RAX: 0000000000000a00 RBX: 00000000000003e8 RCX: 0000000000000000
	RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88013c852600
	RBP: ffff880037a6bcf0 R08: 0000000000000001 R09: 0000000000015c90
	R10: ffff880239bf6c00 R11: 0000000000000016 R12: 0000000000003fff
	R13: ffff88013c852600 R14: ffffea0008d1b000 R15: 0000000000000003
	FS:  00007f12bb048700(0000) GS:ffff88007da00000(0000) knlGS:0000000000000000
	CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
	CR2: 0000000001505678 CR3: 0000000234770000 CR4: 00000000000006f0
	Stack:
	 ffff88013c852600 0000000000003fff ffff880037a6bd18 ffffffff810741d1
	 ffff88013c852600 0000000000003fff 000000000002bfff ffff880037a6bda8
	 ffffffff81077ef7 ffffea0008a56d40 0000000000000001 0000000000000001
	Call Trace:
	 [<ffffffff810741d1>] task_scan_max+0x11/0x40
	 [<ffffffff81077ef7>] task_numa_fault+0x1f7/0xae0
	 [<ffffffff8115a896>] ? migrate_misplaced_page+0x276/0x300
	 [<ffffffff81134a4d>] handle_mm_fault+0x62d/0xba0
	 [<ffffffff8103e2f1>] __do_page_fault+0x191/0x510
	 [<ffffffff81030122>] ? native_smp_send_reschedule+0x42/0x60
	 [<ffffffff8106dc00>] ? check_preempt_curr+0x80/0xa0
	 [<ffffffff8107092c>] ? wake_up_new_task+0x11c/0x1a0
	 [<ffffffff8104887d>] ? do_fork+0x14d/0x340
	 [<ffffffff811799bb>] ? get_unused_fd_flags+0x2b/0x30
	 [<ffffffff811799df>] ? __fd_install+0x1f/0x60
	 [<ffffffff8103e67c>] do_page_fault+0xc/0x10
	 [<ffffffff8150d322>] page_fault+0x22/0x30
	RIP  [<ffffffff81074191>] task_scan_min+0x21/0x50
	RSP <ffff880037a6bce0>
	---[ end trace 9a826d16936c04de ]---

Also fix race in task_scan_min (it depends on compiler behaviour).
Signed-off-by: NKirill Tkhai <ktkhai@parallels.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dario Faggioli <raistlin@linux.it>
Cc: David Rientjes <rientjes@google.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Link: http://lkml.kernel.org/r/1413455977.24793.78.camel@tkhaiSigned-off-by: NIngo Molnar <mingo@kernel.org>
      64192658
  9. 10 10月, 2014 1 次提交
  11. 17 9月, 2014 1 次提交
  13. 07 8月, 2014 1 次提交
  15. 24 6月, 2014 2 次提交
    • A
      kernel/watchdog.c: print traces for all cpus on lockup detection · ed235875
      由 Aaron Tomlin 提交于 
      A 'softlockup' is defined as a bug that causes the kernel to loop in
kernel mode for more than a predefined period to time, without giving
other tasks a chance to run.

Currently, upon detection of this condition by the per-cpu watchdog
task, debug information (including a stack trace) is sent to the system
log.

On some occasions, we have observed that the "victim" rather than the
actual "culprit" (i.e.  the owner/holder of the contended resource) is
reported to the user.  Often this information has proven to be
insufficient to assist debugging efforts.

To avoid loss of useful debug information, for architectures which
support NMI, this patch makes it possible to improve soft lockup
reporting.  This is accomplished by issuing an NMI to each cpu to obtain
a stack trace.

If NMI is not supported we just revert back to the old method.  A sysctl
and boot-time parameter is available to toggle this feature.

[dzickus@redhat.com: add CONFIG_SMP in certain areas]
[akpm@linux-foundation.org: additional CONFIG_SMP=n optimisations]
[mq@suse.cz: fix warning]
Signed-off-by: NAaron Tomlin <atomlin@redhat.com>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NJan Moskyto Matejka <mq@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ed235875
    • D
      mm, pcp: allow restoring percpu_pagelist_fraction default · 7cd2b0a3
      由 David Rientjes 提交于 
      Oleg reports a division by zero error on zero-length write() to the
percpu_pagelist_fraction sysctl:

    divide error: 0000 [#1] SMP DEBUG_PAGEALLOC
    CPU: 1 PID: 9142 Comm: badarea_io Not tainted 3.15.0-rc2-vm-nfs+ #19
    Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
    task: ffff8800d5aeb6e0 ti: ffff8800d87a2000 task.ti: ffff8800d87a2000
    RIP: 0010: percpu_pagelist_fraction_sysctl_handler+0x84/0x120
    RSP: 0018:ffff8800d87a3e78  EFLAGS: 00010246
    RAX: 0000000000000f89 RBX: ffff88011f7fd000 RCX: 0000000000000000
    RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000010
    RBP: ffff8800d87a3e98 R08: ffffffff81d002c8 R09: ffff8800d87a3f50
    R10: 000000000000000b R11: 0000000000000246 R12: 0000000000000060
    R13: ffffffff81c3c3e0 R14: ffffffff81cfddf8 R15: ffff8801193b0800
    FS:  00007f614f1e9740(0000) GS:ffff88011f440000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: 00007f614f1fa000 CR3: 00000000d9291000 CR4: 00000000000006e0
    Call Trace:
      proc_sys_call_handler+0xb3/0xc0
      proc_sys_write+0x14/0x20
      vfs_write+0xba/0x1e0
      SyS_write+0x46/0xb0
      tracesys+0xe1/0xe6

However, if the percpu_pagelist_fraction sysctl is set by the user, it
is also impossible to restore it to the kernel default since the user
cannot write 0 to the sysctl.

This patch allows the user to write 0 to restore the default behavior.
It still requires a fraction equal to or larger than 8, however, as
stated by the documentation for sanity.  If a value in the range [1, 7]
is written, the sysctl will return EINVAL.

This successfully solves the divide by zero issue at the same time.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Reported-by: NOleg Drokin <green@linuxhacker.ru>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7cd2b0a3
  17. 07 6月, 2014 4 次提交
    • J
      sysctl: convert use of typedef ctl_table to struct ctl_table · 6f8fd1d7
      由 Joe Perches 提交于 
      This typedef is unnecessary and should just be removed.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      6f8fd1d7
    • K
      sysctl: allow for strict write position handling · f4aacea2
      由 Kees Cook 提交于 
      When writing to a sysctl string, each write, regardless of VFS position,
begins writing the string from the start.  This means the contents of
the last write to the sysctl controls the string contents instead of the
first:

  open("/proc/sys/kernel/modprobe", O_WRONLY)   = 1
  write(1, "AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA"..., 4096) = 4096
  write(1, "/bin/true", 9)                = 9
  close(1)                                = 0

  $ cat /proc/sys/kernel/modprobe
  /bin/true

Expected behaviour would be to have the sysctl be "AAAA..." capped at
maxlen (in this case KMOD_PATH_LEN: 256), instead of truncating to the
contents of the second write.  Similarly, multiple short writes would
not append to the sysctl.

The old behavior is unlike regular POSIX files enough that doing audits
of software that interact with sysctls can end up in unexpected or
dangerous situations.  For example, "as long as the input starts with a
trusted path" turns out to be an insufficient filter, as what must also
happen is for the input to be entirely contained in a single write
syscall -- not a common consideration, especially for high level tools.

This provides kernel.sysctl_writes_strict as a way to make this behavior
act in a less surprising manner for strings, and disallows non-zero file
position when writing numeric sysctls (similar to what is already done
when reading from non-zero file positions).  For now, the default (0) is
to warn about non-zero file position use, but retain the legacy
behavior.  Setting this to -1 disables the warning, and setting this to
1 enables the file position respecting behavior.

[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: move misplaced hunk, per Randy]
Signed-off-by: NKees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f4aacea2
    • K
      sysctl: refactor sysctl string writing logic · 2ca9bb45
      由 Kees Cook 提交于 
      Consolidate buffer length checking with new-line/end-of-line checking.
Additionally, instead of reading user memory twice, just do the
assignment during the loop.

This change doesn't affect the potential races here.  It was already
possible to read a sysctl that was in the middle of a write.  In both
cases, the string will always be NULL terminated.  The pre-existing race
remains a problem to be solved.
Signed-off-by: NKees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2ca9bb45
    • K
      sysctl: clean up char buffer arguments · f8808300
      由 Kees Cook 提交于 
      When writing to a sysctl string, each write, regardless of VFS position,
began writing the string from the start.  This meant the contents of the
last write to the sysctl controlled the string contents instead of the
first.

This misbehavior was featured in an exploit against Chrome OS.  While
it's not in itself a vulnerability, it's a weirdness that isn't on the
mind of most auditors: "This filter looks correct, the first line
written would not be meaningful to sysctl" doesn't apply here, since the
size of the write and the contents of the final write are what matter
when writing to sysctls.

This adds the sysctl kernel.sysctl_writes_strict to control the write
behavior.  The default (0) reports when VFS position is non-0 on a
write, but retains legacy behavior, -1 disables the warning, and 1
enables the position-respecting behavior.

The long-term plan here is to wait for userspace to be fixed in response
to the new warning and to then switch the default kernel behavior to the
new position-respecting behavior.

This patch (of 4):

The char buffer arguments are needlessly cast in weird places.  Clean it
up so things are easier to read.
Signed-off-by: NKees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f8808300
  19. 19 5月, 2014 1 次提交
  21. 15 5月, 2014 1 次提交
  23. 06 5月, 2014 1 次提交
  25. 26 4月, 2014 1 次提交
  27. 08 4月, 2014 1 次提交
  29. 04 4月, 2014 1 次提交
  31. 13 3月, 2014 1 次提交
    • J
      block: remove old blk_iopoll_enabled variable · 89f8b33c
      由 Jens Axboe 提交于 
      This was a debugging measure to toggle enabled/disabled
when testing. But for real production setups, it's not
safe to toggle this setting without either reloading
drivers of quiescing IO first. Neither of which the toggle
enforces.

Additionally, it makes drivers deal with the conditional
state.

Remove it completely. It's up to the driver whether iopoll
is enabled or not.
Signed-off-by: NJens Axboe <axboe@fb.com>
      89f8b33c
  33. 28 1月, 2014 1 次提交
  35. 25 1月, 2014 2 次提交
  37. 24 1月, 2014 2 次提交
    • K
      kexec: add sysctl to disable kexec_load · 7984754b
      由 Kees Cook 提交于 
      For general-purpose (i.e.  distro) kernel builds it makes sense to build
with CONFIG_KEXEC to allow end users to choose what kind of things they
want to do with kexec.  However, in the face of trying to lock down a
system with such a kernel, there needs to be a way to disable kexec_load
(much like module loading can be disabled).  Without this, it is too easy
for the root user to modify kernel memory even when CONFIG_STRICT_DEVMEM
and modules_disabled are set.  With this change, it is still possible to
load an image for use later, then disable kexec_load so the image (or lack
of image) can't be altered.

The intention is for using this in environments where "perfect"
enforcement is hard.  Without a verified boot, along with verified
modules, and along with verified kexec, this is trying to give a system a
better chance to defend itself (or at least grow the window of
discoverability) against attack in the face of a privilege escalation.

In my mind, I consider several boot scenarios:

1) Verified boot of read-only verified root fs loading fd-based
   verification of kexec images.
2) Secure boot of writable root fs loading signed kexec images.
3) Regular boot loading kexec (e.g. kcrash) image early and locking it.
4) Regular boot with no control of kexec image at all.

1 and 2 don't exist yet, but will soon once the verified kexec series has
landed.  4 is the state of things now.  The gap between 2 and 4 is too
large, so this change creates scenario 3, a middle-ground above 4 when 2
and 1 are not possible for a system.
Signed-off-by: NKees Cook <keescook@chromium.org>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7984754b
    • A
      numa: add a sysctl for numa_balancing · 54a43d54
      由 Andi Kleen 提交于 
      Add a working sysctl to enable/disable automatic numa memory balancing
at runtime.

This allows us to track down performance problems with this feature and
is generally a good idea.

This was possible earlier through debugfs, but only with special
debugging options set.  Also fix the boot message.

[akpm@linux-foundation.org: s/sched_numa_balancing/sysctl_numa_balancing/]
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      54a43d54
  39. 22 1月, 2014 1 次提交
    • J
      mm: add overcommit_kbytes sysctl variable · 49f0ce5f
      由 Jerome Marchand 提交于 
      Some applications that run on HPC clusters are designed around the
availability of RAM and the overcommit ratio is fine tuned to get the
maximum usage of memory without swapping.  With growing memory, the
1%-of-all-RAM grain provided by overcommit_ratio has become too coarse
for these workload (on a 2TB machine it represents no less than 20GB).

This patch adds the new overcommit_kbytes sysctl variable that allow a
much finer grain.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix nommu build]
Signed-off-by: NJerome Marchand <jmarchan@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      49f0ce5f
  41. 13 1月, 2014 2 次提交
    • P
      sched/deadline: Remove the sysctl_sched_dl knobs · 1724813d
      由 Peter Zijlstra 提交于 
      Remove the deadline specific sysctls for now. The problem with them is
that the interaction with the exisiting rt knobs is nearly impossible
to get right.

The current (as per before this patch) situation is that the rt and dl
bandwidth is completely separate and we enforce rt+dl < 100%. This is
undesirable because this means that the rt default of 95% leaves us
hardly any room, even though dl tasks are saver than rt tasks.

Another proposed solution was (a discarted patch) to have the dl
bandwidth be a fraction of the rt bandwidth. This is highly
confusing imo.

Furthermore neither proposal is consistent with the situation we
actually want; which is rt tasks ran from a dl server. In which case
the rt bandwidth is a direct subset of dl.

So whichever way we go, the introduction of dl controls at this point
is painful. Therefore remove them and instead share the rt budget.

This means that for now the rt knobs are used for dl admission control
and the dl runtime is accounted against the rt runtime. I realise that
this isn't entirely desirable either; but whatever we do we appear to
need to change the interface later, so better have a small interface
for now.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-zpyqbqds1r0vyxtxza1e7rdc@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      1724813d
    • D
      sched/deadline: Add bandwidth management for SCHED_DEADLINE tasks · 332ac17e
      由 Dario Faggioli 提交于 
      In order of deadline scheduling to be effective and useful, it is
important that some method of having the allocation of the available
CPU bandwidth to tasks and task groups under control.
This is usually called "admission control" and if it is not performed
at all, no guarantee can be given on the actual scheduling of the
-deadline tasks.

Since when RT-throttling has been introduced each task group have a
bandwidth associated to itself, calculated as a certain amount of
runtime over a period. Moreover, to make it possible to manipulate
such bandwidth, readable/writable controls have been added to both
procfs (for system wide settings) and cgroupfs (for per-group
settings).

Therefore, the same interface is being used for controlling the
bandwidth distrubution to -deadline tasks and task groups, i.e.,
new controls but with similar names, equivalent meaning and with
the same usage paradigm are added.

However, more discussion is needed in order to figure out how
we want to manage SCHED_DEADLINE bandwidth at the task group level.
Therefore, this patch adds a less sophisticated, but actually
very sensible, mechanism to ensure that a certain utilization
cap is not overcome per each root_domain (the single rq for !SMP
configurations).

Another main difference between deadline bandwidth management and
RT-throttling is that -deadline tasks have bandwidth on their own
(while -rt ones doesn't!), and thus we don't need an higher level
throttling mechanism to enforce the desired bandwidth.

This patch, therefore:

 - adds system wide deadline bandwidth management by means of:
    * /proc/sys/kernel/sched_dl_runtime_us,
    * /proc/sys/kernel/sched_dl_period_us,
   that determine (i.e., runtime / period) the total bandwidth
   available on each CPU of each root_domain for -deadline tasks;

 - couples the RT and deadline bandwidth management, i.e., enforces
   that the sum of how much bandwidth is being devoted to -rt
   -deadline tasks to stay below 100%.

This means that, for a root_domain comprising M CPUs, -deadline tasks
can be created until the sum of their bandwidths stay below:

    M * (sched_dl_runtime_us / sched_dl_period_us)

It is also possible to disable this bandwidth management logic, and
be thus free of oversubscribing the system up to any arbitrary level.
Signed-off-by: NDario Faggioli <raistlin@linux.it>
Signed-off-by: NJuri Lelli <juri.lelli@gmail.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-12-git-send-email-juri.lelli@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      332ac17e
  43. 17 12月, 2013 1 次提交
  45. 13 11月, 2013 1 次提交
  47. 17 10月, 2013 1 次提交
  49. 09 10月, 2013 3 次提交
  51. 04 10月, 2013 1 次提交
  53. 23 9月, 2013 1 次提交
  55. 12 9月, 2013 1 次提交
  57. 11 9月, 2013 1 次提交
    • G
      fs: bump inode and dentry counters to long · 3942c07c
      由 Glauber Costa 提交于 
      This series reworks our current object cache shrinking infrastructure in
two main ways:

 * Noticing that a lot of users copy and paste their own version of LRU
   lists for objects, we put some effort in providing a generic version.
   It is modeled after the filesystem users: dentries, inodes, and xfs
   (for various tasks), but we expect that other users could benefit in
   the near future with little or no modification.  Let us know if you
   have any issues.

 * The underlying list_lru being proposed automatically and
   transparently keeps the elements in per-node lists, and is able to
   manipulate the node lists individually.  Given this infrastructure, we
   are able to modify the up-to-now hammer called shrink_slab to proceed
   with node-reclaim instead of always searching memory from all over like
   it has been doing.

Per-node lru lists are also expected to lead to less contention in the lru
locks on multi-node scans, since we are now no longer fighting for a
global lock.  The locks usually disappear from the profilers with this
change.

Although we have no official benchmarks for this version - be our guest to
independently evaluate this - earlier versions of this series were
performance tested (details at
http://permalink.gmane.org/gmane.linux.kernel.mm/100537) yielding no
visible performance regressions while yielding a better qualitative
behavior in NUMA machines.

With this infrastructure in place, we can use the list_lru entry point to
provide memcg isolation and per-memcg targeted reclaim.  Historically,
those two pieces of work have been posted together.  This version presents
only the infrastructure work, deferring the memcg work for a later time,
so we can focus on getting this part tested.  You can see more about the
history of such work at http://lwn.net/Articles/552769/

Dave Chinner (18):
  dcache: convert dentry_stat.nr_unused to per-cpu counters
  dentry: move to per-sb LRU locks
  dcache: remove dentries from LRU before putting on dispose list
  mm: new shrinker API
  shrinker: convert superblock shrinkers to new API
  list: add a new LRU list type
  inode: convert inode lru list to generic lru list code.
  dcache: convert to use new lru list infrastructure
  list_lru: per-node list infrastructure
  shrinker: add node awareness
  fs: convert inode and dentry shrinking to be node aware
  xfs: convert buftarg LRU to generic code
  xfs: rework buffer dispose list tracking
  xfs: convert dquot cache lru to list_lru
  fs: convert fs shrinkers to new scan/count API
  drivers: convert shrinkers to new count/scan API
  shrinker: convert remaining shrinkers to count/scan API
  shrinker: Kill old ->shrink API.

Glauber Costa (7):
  fs: bump inode and dentry counters to long
  super: fix calculation of shrinkable objects for small numbers
  list_lru: per-node API
  vmscan: per-node deferred work
  i915: bail out earlier when shrinker cannot acquire mutex
  hugepage: convert huge zero page shrinker to new shrinker API
  list_lru: dynamically adjust node arrays

This patch:

There are situations in very large machines in which we can have a large
quantity of dirty inodes, unused dentries, etc.  This is particularly true
when umounting a filesystem, where eventually since every live object will
eventually be discarded.

Dave Chinner reported a problem with this while experimenting with the
shrinker revamp patchset.  So we believe it is time for a change.  This
patch just moves int to longs.  Machines where it matters should have a
big long anyway.
Signed-off-by: NGlauber Costa <glommer@openvz.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      3942c07c
  59. 27 7月, 2013 1 次提交
  61. 23 6月, 2013 1 次提交
    • D
      perf: Drop sample rate when sampling is too slow · 14c63f17
      由 Dave Hansen 提交于 
      This patch keeps track of how long perf's NMI handler is taking,
and also calculates how many samples perf can take a second.  If
the sample length times the expected max number of samples
exceeds a configurable threshold, it drops the sample rate.

This way, we don't have a runaway sampling process eating up the
CPU.

This patch can tend to drop the sample rate down to level where
perf doesn't work very well.  *BUT* the alternative is that my
system hangs because it spends all of its time handling NMIs.

I'll take a busted performance tool over an entire system that's
busted and undebuggable any day.

BTW, my suspicion is that there's still an underlying bug here.
Using the HPET instead of the TSC is definitely a contributing
factor, but I suspect there are some other things going on.
But, I can't go dig down on a bug like that with my machine
hanging all the time.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: acme@ghostprotocols.net
Cc: Dave Hansen <dave@sr71.net>
[ Prettified it a bit. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      14c63f17