- 05 10月, 2017 4 次提交
-
-
由 David Ahern 提交于
Pass extack to do_set_master and down to ndo_add_slave Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
x-netns interfaces are bound to two netns: the link netns and the upper netns. Usually, this kind of interfaces is created in the link netns and then moved to the upper netns. At the end, the interface is visible only in the upper netns. The link nsid is advertised via netlink in the upper netns, thus the user always knows where is the link part. There is no such mechanism in the link netns. When the interface is moved to another netns, the user cannot "follow" it. This patch adds a new netlink attribute which helps to follow an interface which moves to another netns. When the interface is unregistered, the new nsid is advertised. If the interface is a x-netns interface (ie rtnl_link_ops->get_link_net is defined), the nsid is allocated if needed. CC: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
switch the only caller to rtnl_af_unregister. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
no users in the tree. Signed-off-by: NFlorian Westphal <fw@strlen.de> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 10月, 2017 1 次提交
-
-
由 Florian Westphal 提交于
Device alias can be set by either rtnetlink (rtnl is held) or sysfs. rtnetlink hold the rtnl mutex, sysfs acquires it for this purpose. Add an extra mutex for it and use rcu to protect concurrent accesses. This allows the sysfs path to not take rtnl and would later allow to not hold it when dumping ifalias. Based on suggestion from Eric Dumazet. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 9月, 2017 4 次提交
-
-
由 Florian Westphal 提交于
it can be switched to rcu. Reviewed-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
Reviewed-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
similar to earlier patches, split out more parts of this function to better see what is happening and where we assume rtnl is locked. Reviewed-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
rtnl_fill_ifinfo currently requires caller to hold the rtnl mutex. Unfortunately the function is quite large which makes it harder to see which spots require the lock, which spots assume it and which ones could do without. Add helpers to factor out the ifindex dumping, one can use rcu to avoid rtnl dependency. Reviewed-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 8月, 2017 1 次提交
-
-
由 Jakub Sitnicki 提交于
Calls to rtnl_dump_ifinfo() are protected by RTNL lock. So are the {list,unlist}_netdevice() calls where we bump the net->dev_base_seq number. For this reason net->dev_base_seq can't change under out feet while we're looping over links in rtnl_dump_ifinfo(). So move the check for net->dev_base_seq change (since the last time we were called) out of the loop. This way we avoid giving a wrong impression that there are concurrent updates to the link list going on while we're iterating over them. Signed-off-by: NJakub Sitnicki <jkbs@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 8月, 2017 5 次提交
-
-
由 Florian Westphal 提交于
We need to use PF_UNSPEC in case the requested family has no doit callback, otherwise this now fails with EOPNOTSUPP instead of running the unspec doit callback, as before. Fixes: 6853dd48 ("rtnetlink: protect handler table with rcu") Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
If using CONFIG_REFCOUNT_FULL=y we get following splat: refcount_t: increment on 0; use-after-free. WARNING: CPU: 0 PID: 304 at lib/refcount.c:152 refcount_inc+0x47/0x50 Call Trace: rtnetlink_rcv_msg+0x191/0x260 ... This warning is harmless (0 is "no callback running", not "memory was freed"). Use '1' as the new 'no handler is running' base instead of 0 to avoid this. Fixes: 019a3169 ("rtnetlink: add reference counting to prevent module unload while dump is in progress") Reported-by: NSabrina Dubroca <sdubroca@redhat.com> Reported-by: Nkernel test robot <fengguang.wu@intel.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
David Ahern reports following splat: RTNL: assertion failed at net/core/dev.c (5717) netdev_master_upper_dev_get+0x5f/0x70 if_nlmsg_size+0x158/0x240 rtnl_calcit.isra.26+0xa3/0xf0 rtnl_link_get_slave_info_data_size currently assumes RTNL protection, but there appears to be no hard requirement for this, so use rcu instead. At the time of this writing, there are three 'get_slave_size' callbacks (now invoked under rcu): bond_get_slave_size, vrf_get_slave_size and br_port_get_slave_size, all return constant only (i.e. they don't sleep). Fixes: 6853dd48 ("rtnetlink: protect handler table with rcu") Reported-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Acked-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
Userspace sends RTM_GETLINK type, but the kernel substracts RTM_BASE from this, i.e. 'type' doesn't contain RTM_GETLINK anymore but instead RTM_GETLINK - RTM_BASE. This caused the calcit callback to not be invoked when it should have been (and vice versa). While at it, also fix a off-by one when checking family index. vs handler array size. Fixes: e1fa6d21 ("rtnetlink: call rtnl_calcit directly") Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
Ido reports a rcu splat in __rtnl_register. The splat is correct; as rtnl_register doesn't grab any logs and doesn't use rcu locks either. It has always been like this. handler families are not registered in parallel so there are no races wrt. the kmalloc ordering. The only reason to use rcu_dereference in the first place was to avoid sparse from complaining about this. Thus this switches to _raw() to not have rcu checks here. The alternative is to add rtnl locking to register/unregister, however, I don't see a compelling reason to do so as this has been lockless for the past twenty years or so. Fixes: 6853dd48 ("rtnetlink: protect handler table with rcu") Reported-by: NIdo Schimmel <idosch@idosch.org> Signed-off-by: NFlorian Westphal <fw@strlen.de> Tested-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 8月, 2017 6 次提交
-
-
由 Florian Westphal 提交于
Allow callers to tell rtnetlink core that its doit callback should be invoked without holding rtnl mutex. Signed-off-by: NFlorian Westphal <fw@strlen.de> Reviewed-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
Note that netlink dumps still acquire rtnl mutex via the netlink dump infrastructure. Signed-off-by: NFlorian Westphal <fw@strlen.de> Reviewed-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
instead of rtnl lock/unload at the top level, push it down to the called function. This is just an intermediate step, next commit switches protection of the rtnl_link ops table to rcu, in which case (for dumps) the rtnl lock is acquired only by the netlink dumper infrastructure (current lock/unlock/dump/lock/unlock rtnl sequence becomes rcu lock/rcu unlock/dump). Signed-off-by: NFlorian Westphal <fw@strlen.de> Reviewed-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
I don't see what prevents rmmod (unregister_all is called) while a dump is active. Even if we'd add rtnl lock/unlock pair to unregister_all (as done here), thats not enough either as rtnl_lock is released right before the dump process starts. So this adds a refcount: * acquire rtnl mutex * bump refcount * release mutex * start the dump ... and make unregister_all remove the callbacks (no new dumps possible) and then wait until refcount is 0. Signed-off-by: NFlorian Westphal <fw@strlen.de> Reviewed-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
This change allows us to later indicate to rtnetlink core that certain doit functions should be called without acquiring rtnl_mutex. This change should have no effect, we simply replace the last (now unused) calcit argument with the new flag. Signed-off-by: NFlorian Westphal <fw@strlen.de> Reviewed-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
There is only a single place in the kernel that regisers the "calcit" callback (to determine min allocation for dumps). This is in rtnetlink.c for PF_UNSPEC RTM_GETLINK. The function that checks for calcit presence at run time will first check the requested family (which will always fail for !PF_UNSPEC as no callsite registers this), then falls back to checking PF_UNSPEC. Therefore we can just check if type is RTM_GETLINK and then do a direct call. Because of fallback to PF_UNSPEC all RTM_GETLINK types used this regardless of family. This has the advantage that we don't need to allocate space for the function pointer for all the other families. A followup patch will drop the calcit function pointer from the rtnl_link callback structure. Signed-off-by: NFlorian Westphal <fw@strlen.de> Reviewed-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 7月, 2017 1 次提交
-
-
由 WANG Cong 提交于
virtnet_set_mac_address() interprets mac address as struct sockaddr, but upper layer only allocates dev->addr_len which is ETH_ALEN + sizeof(sa_family_t) in this case. We lack a unified definition for mac address, so just fix the upper layer, this also allows drivers to interpret it to struct sockaddr freely. Reported-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 7月, 2017 1 次提交
-
-
由 David Ahern 提交于
This reverts commit cd8966e7. The duplicate CHANGEADDR event message is sent regardless of link status whereas the setlink changes only generate a notification when the link is up. Not sending a notification when the link is down breaks dhcpcd which only processes hwaddr changes when the link is down. Fixes reported regression: https://bugzilla.kernel.org/show_bug.cgi?id=196355Reported-by: NYaroslav Isakov <yaroslav.isakov@gmail.com> Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 7月, 2017 1 次提交
-
-
由 Reshetova, Elena 提交于
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: NElena Reshetova <elena.reshetova@intel.com> Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com> Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NDavid Windsor <dwindsor@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 6月, 2017 5 次提交
-
-
由 Matthias Schiffer 提交于
Add support for extended error reporting. Signed-off-by: NMatthias Schiffer <mschiffer@universe-factory.net> Acked-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matthias Schiffer 提交于
Add support for extended error reporting. Signed-off-by: NMatthias Schiffer <mschiffer@universe-factory.net> Acked-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matthias Schiffer 提交于
Add support for extended error reporting. Signed-off-by: NMatthias Schiffer <mschiffer@universe-factory.net> Acked-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matthias Schiffer 提交于
Add support for extended error reporting. Signed-off-by: NMatthias Schiffer <mschiffer@universe-factory.net> Acked-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matthias Schiffer 提交于
Add support for extended error reporting. Signed-off-by: NMatthias Schiffer <mschiffer@universe-factory.net> Acked-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 6月, 2017 2 次提交
-
-
由 Jakub Kicinski 提交于
Extend the XDP_ATTACHED_* values to include offloaded mode. Let drivers report whether program is installed in the driver or the HW by changing the prog_attached field from bool to u8 (type of the netlink attribute). Exploit the fact that the value of XDP_ATTACHED_DRV is 1, therefore since all drivers currently assign the mode with double negation: mode = !!xdp_prog; no drivers have to be modified. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net> -
由 Jakub Kicinski 提交于
Add an installation-time flag for requesting that the program be installed only if it can be offloaded to HW. Internally new command for ndo_xdp is added, this way we avoid putting checks into drivers since they all return -EINVAL on an unknown command. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 6月, 2017 2 次提交
-
-
由 Julien Gomes 提交于
Add RTNLGRP_{IPV4,IPV6}_MROUTE_R as two new restricted groups for the NETLINK_ROUTE family. Binding to these groups specifically requires CAP_NET_ADMIN to allow multicast of sensitive messages (e.g. mroute cache reports). Suggested-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NJulien Gomes <julien@arista.com> Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> -
由 Serhey Popovych 提交于
Network interface groups support added while ago, however there is no IFLA_GROUP attribute description in policy and netlink message size calculations until now. Add IFLA_GROUP attribute to the policy. Fixes: cbda10fa ("net_device: add support for network device groups") Signed-off-by: NSerhey Popovych <serhe.popovych@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 6月, 2017 1 次提交
-
-
由 Martin KaFai Lau 提交于
Expose prog_id through IFLA_XDP_PROG_ID. This patch makes modification to generic_xdp. The later patches will modify other xdp-supported drivers. prog_id is added to struct net_dev_xdp. iproute2 patch will be followed. Here is how the 'ip link' will look like: > ip link show eth0 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 xdp(prog_id:1) qdisc fq_codel state UP mode DEFAULT group default qlen 1000 Signed-off-by: NMartin KaFai Lau <kafai@fb.com> Acked-by: NAlexei Starovoitov <ast@fb.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 6月, 2017 1 次提交
-
-
由 Mintz, Yuval 提交于
Some of the structure's fields are not initialized by the rtnetlink. If driver doesn't set those in ndo_get_vf_config(), they'd leak memory to user. Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> CC: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: NGreg Rose <gvrose8192@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 6月, 2017 1 次提交
-
-
由 Vlad Yasevich 提交于
Small clean-up to rtmsg_ifinfo() to use the rtnl_get_event() interface instead of using 'internal' values directly. Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com> Acked-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 5月, 2017 1 次提交
-
-
由 Vlad Yasevich 提交于
When netdev events happen, a rtnetlink_event() handler will send messages for every event in it's white list. These messages contain current information about a particular device, but they do not include the iformation about which event just happened. So, it is impossible to tell what just happend for these events. This patch adds a new extension to RTM_NEWLINK message called IFLA_EVENT that would have an encoding of event that triggered this message. This would allow the the message consumer to easily determine if it needs to perform certain actions. Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com> Acked-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 5月, 2017 1 次提交
-
-
由 Alexander Potapenko 提交于
rtnl_fdb_dump() failed to check the result of nlmsg_parse(), which led to contents of |ifm| being uninitialized because nlh->nlmsglen was too small to accommodate |ifm|. The uninitialized data may affect some branches and result in unwanted effects, although kernel data doesn't seem to leak to the userspace directly. The bug has been detected with KMSAN and syzkaller. For the record, here is the KMSAN report: ================================================================== BUG: KMSAN: use of unitialized memory in rtnl_fdb_dump+0x5dc/0x1000 CPU: 0 PID: 1039 Comm: probe Not tainted 4.11.0-rc5+ #2727 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x143/0x1b0 lib/dump_stack.c:52 kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:1007 __kmsan_warning_32+0x66/0xb0 mm/kmsan/kmsan_instr.c:491 rtnl_fdb_dump+0x5dc/0x1000 net/core/rtnetlink.c:3230 netlink_dump+0x84f/0x1190 net/netlink/af_netlink.c:2168 __netlink_dump_start+0xc97/0xe50 net/netlink/af_netlink.c:2258 netlink_dump_start ./include/linux/netlink.h:165 rtnetlink_rcv_msg+0xae9/0xb40 net/core/rtnetlink.c:4094 netlink_rcv_skb+0x339/0x5a0 net/netlink/af_netlink.c:2339 rtnetlink_rcv+0x83/0xa0 net/core/rtnetlink.c:4110 netlink_unicast_kernel net/netlink/af_netlink.c:1272 netlink_unicast+0x13b7/0x1480 net/netlink/af_netlink.c:1298 netlink_sendmsg+0x10b8/0x10f0 net/netlink/af_netlink.c:1844 sock_sendmsg_nosec net/socket.c:633 sock_sendmsg net/socket.c:643 ___sys_sendmsg+0xd4b/0x10f0 net/socket.c:1997 __sys_sendmsg net/socket.c:2031 SYSC_sendmsg+0x2c6/0x3f0 net/socket.c:2042 SyS_sendmsg+0x87/0xb0 net/socket.c:2038 do_syscall_64+0x102/0x150 arch/x86/entry/common.c:285 entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:246 RIP: 0033:0x401300 RSP: 002b:00007ffc3b0e6d58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002b0 RCX: 0000000000401300 RDX: 0000000000000000 RSI: 00007ffc3b0e6d80 RDI: 0000000000000003 RBP: 00007ffc3b0e6e00 R08: 000000000000000b R09: 0000000000000004 R10: 000000000000000d R11: 0000000000000246 R12: 0000000000000000 R13: 00000000004065a0 R14: 0000000000406630 R15: 0000000000000000 origin: 000000008fe00056 save_stack_trace+0x59/0x60 arch/x86/kernel/stacktrace.c:59 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:352 kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:247 kmsan_poison_shadow+0x6d/0xc0 mm/kmsan/kmsan.c:260 slab_alloc_node mm/slub.c:2743 __kmalloc_node_track_caller+0x1f4/0x390 mm/slub.c:4349 __kmalloc_reserve net/core/skbuff.c:138 __alloc_skb+0x2cd/0x740 net/core/skbuff.c:231 alloc_skb ./include/linux/skbuff.h:933 netlink_alloc_large_skb net/netlink/af_netlink.c:1144 netlink_sendmsg+0x934/0x10f0 net/netlink/af_netlink.c:1819 sock_sendmsg_nosec net/socket.c:633 sock_sendmsg net/socket.c:643 ___sys_sendmsg+0xd4b/0x10f0 net/socket.c:1997 __sys_sendmsg net/socket.c:2031 SYSC_sendmsg+0x2c6/0x3f0 net/socket.c:2042 SyS_sendmsg+0x87/0xb0 net/socket.c:2038 do_syscall_64+0x102/0x150 arch/x86/entry/common.c:285 return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:246 ================================================================== and the reproducer: ================================================================== #include <sys/socket.h> #include <net/if_arp.h> #include <linux/netlink.h> #include <stdint.h> int main() { int sock = socket(PF_NETLINK, SOCK_DGRAM | SOCK_NONBLOCK, 0); struct msghdr msg; memset(&msg, 0, sizeof(msg)); char nlmsg_buf[32]; memset(nlmsg_buf, 0, sizeof(nlmsg_buf)); struct nlmsghdr *nlmsg = nlmsg_buf; nlmsg->nlmsg_len = 0x11; nlmsg->nlmsg_type = 0x1e; // RTM_NEWROUTE = RTM_BASE + 0x0e // type = 0x0e = 1110b // kind = 2 nlmsg->nlmsg_flags = 0x101; // NLM_F_ROOT | NLM_F_REQUEST nlmsg->nlmsg_seq = 0; nlmsg->nlmsg_pid = 0; nlmsg_buf[16] = (char)7; struct iovec iov; iov.iov_base = nlmsg_buf; iov.iov_len = 17; msg.msg_iov = &iov; msg.msg_iovlen = 1; sendmsg(sock, &msg, 0); return 0; } ================================================================== Signed-off-by: NAlexander Potapenko <glider@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 5月, 2017 1 次提交
-
-
由 Alexey Dobriyan 提交于
4 billion packet queue is something unthinkable so use 32-bit value for now. Space savings on x86_64: add/remove: 0/0 grow/shrink: 3/70 up/down: 16/-131 (-115) function old new delta change_tx_queue_len 94 108 +14 qdisc_create 1176 1177 +1 alloc_netdev_mqs 1124 1125 +1 xenvif_alloc 533 532 -1 x25_asy_setup 167 166 -1 ... tun_queue_resize 945 940 -5 pfifo_fast_enqueue 167 162 -5 qfq_init_qdisc 168 158 -10 tap_queue_resize 810 799 -11 transmit 719 698 -21 Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 5月, 2017 1 次提交
-
-
由 David Ahern 提交于
In general, rtnetlink dumps do not anticipate failure to dump a single object (e.g., link or route) on a single pass. As both route and link objects have grown via more attributes, that is no longer a given. netlink dumps can handle a failure if the dump function returns an error; specifically, netlink_dump adds the return code to the response if it is <= 0 so userspace is notified of the failure. The missing piece is the rtnetlink dump functions returning the error. Fix route and link dump functions to return the errors if no object is added to an skb (detected by skb->len != 0). IPv6 route dumps (rt6_dump_route) already return the error; this patch updates IPv4 and link dumps. Other dump functions may need to be ajusted as well. Reported-by: NJan Moskyto Matejka <mq@ucw.cz> Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-