Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 4 年多

通知 15
Star 8
Fork 2
K
kernel_linux
“bd33b87a9a15f8182e8c6a49f5413e7ef79372bf”上不存在“drivers/pci/dwc/pci-layerscape.c”
提交 e99716f1 编写于 作者: B Ben Skeggs
浏览文件
操作

drm/gr/nvc0-: merge nvc0/nve0 ucode, and use cpp instead of m4 

No code changes, proven by envyas producing identical binaries.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
上级 05f9a5bc
显示空白变更内容
内联 并排
Showing with 1270 addition and 2587 deletion
drivers/gpu/drm/nouveau/core/engine/graph/fuc/nvc0.fuc → drivers/gpu/drm/nouveau/core/engine/graph/fuc/com.fuc
浏览文件 @ e99716f1
...@@ -23,42 +23,7 @@ ...@@ -23,42 +23,7 @@
* Authors: Ben Skeggs * Authors: Ben Skeggs
*/ */
define(`mmctx_data', `.b32 eval((($2 - 1) << 26) | $1)') #ifdef INCLUDE_CODE
define(`queue_init', `.skip eval((2 * 4) + ((8 * 4) * 2))')
ifdef(`include_code', `
// Error codes
define(`E_BAD_COMMAND', 0x01)
define(`E_CMD_OVERFLOW', 0x02)
// Util macros to help with debugging ucode hangs etc
define(`T_WAIT', 0)
define(`T_MMCTX', 1)
define(`T_STRWAIT', 2)
define(`T_STRINIT', 3)
define(`T_AUTO', 4)
define(`T_CHAN', 5)
define(`T_LOAD', 6)
define(`T_SAVE', 7)
define(`T_LCHAN', 8)
define(`T_LCTXH', 9)
define(`trace_set', `
mov $r8 0x83c
shl b32 $r8 6
clear b32 $r9
bset $r9 $1
iowr I[$r8 + 0x000] $r9 // CC_SCRATCH[7]
')
define(`trace_clr', `
mov $r8 0x85c
shl b32 $r8 6
clear b32 $r9
bset $r9 $1
iowr I[$r8 + 0x000] $r9 // CC_SCRATCH[7]
')
// queue_put - add request to queue // queue_put - add request to queue
// //
// In : $r13 queue pointer // In : $r13 queue pointer
...@@ -178,27 +143,41 @@ watchdog_clear: ...@@ -178,27 +143,41 @@ watchdog_clear:
iowr I[$r8 + 0x000] $r0 iowr I[$r8 + 0x000] $r0
ret ret
// wait_done{z,o} - wait on FUC_DONE bit to become clear/set // wait_donez - wait on FUC_DONE bit to become clear
//
// In : $r10 bit to wait on
//
wait_donez:
trace_set(T_WAIT);
mov $r8 0x818
shl b32 $r8 6
iowr I[$r8 + 0x000] $r10
wait_donez_ne:
mov $r8 0x400
shl b32 $r8 6
iord $r8 I[$r8 + 0x000]
xbit $r8 $r8 $r10
bra ne #wait_donez_ne
trace_clr(T_WAIT)
ret
// wait_doneo - wait on FUC_DONE bit to become set
// //
// In : $r10 bit to wait on // In : $r10 bit to wait on
// //
define(`wait_done', ` wait_doneo:
$1:
trace_set(T_WAIT); trace_set(T_WAIT);
mov $r8 0x818 mov $r8 0x818
shl b32 $r8 6 shl b32 $r8 6
iowr I[$r8 + 0x000] $r10 // CC_SCRATCH[6] = wait bit iowr I[$r8 + 0x000] $r10
wait_done_$1: wait_doneo_e:
mov $r8 0x400 mov $r8 0x400
shl b32 $r8 6 shl b32 $r8 6
iord $r8 I[$r8 + 0x000] // DONE iord $r8 I[$r8 + 0x000]
xbit $r8 $r8 $r10 xbit $r8 $r8 $r10
bra $2 #wait_done_$1 bra e #wait_doneo_e
trace_clr(T_WAIT) trace_clr(T_WAIT)
ret ret
')
wait_done(wait_donez, ne)
wait_done(wait_doneo, e)
// mmctx_size - determine size of a mmio list transfer // mmctx_size - determine size of a mmio list transfer
// //
...@@ -397,4 +376,4 @@ strand_ctx_init: ...@@ -397,4 +376,4 @@ strand_ctx_init:
sub b32 $r15 $r14 $r15 sub b32 $r15 $r14 $r15
trace_clr(T_STRINIT) trace_clr(T_STRINIT)
ret ret
') #endif
drivers/gpu/drm/nouveau/core/engine/graph/fuc/gpc.fuc 0 → 100644
浏览文件 @ e99716f1
/* fuc microcode for nvc0 PGRAPH/GPC
*
* Copyright 2011 Red Hat Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors: Ben Skeggs
*/
/* TODO
* - bracket certain functions with scratch writes, useful for debugging
* - watchdog timer around ctx operations
*/
#ifdef INCLUDE_DATA
gpc_id: .b32 0
gpc_mmio_list_head: .b32 0
gpc_mmio_list_tail: .b32 0
tpc_count: .b32 0
tpc_mask: .b32 0
tpc_mmio_list_head: .b32 0
tpc_mmio_list_tail: .b32 0
cmd_queue: queue_init
#endif
#ifdef INCLUDE_CODE
// reports an exception to the host
//
// In: $r15 error code (see nvc0.fuc)
//
error:
push $r14
mov $r14 -0x67ec // 0x9814
sethi $r14 0x400000
call #nv_wr32 // HUB_CTXCTL_CC_SCRATCH[5] = error code
add b32 $r14 0x41c
mov $r15 1
call #nv_wr32 // HUB_CTXCTL_INTR_UP_SET
pop $r14
ret
// GPC fuc initialisation, executed by triggering ucode start, will
// fall through to main loop after completion.
//
// Input:
// CC_SCRATCH[0]: chipset (PMC_BOOT_0 read returns 0x0bad0bad... sigh)
// CC_SCRATCH[1]: context base
//
// Output:
// CC_SCRATCH[0]:
// 31:31: set to signal completion
// CC_SCRATCH[1]:
// 31:0: GPC context size
//
init:
clear b32 $r0
mov $sp $r0
// enable fifo access
mov $r1 0x1200
mov $r2 2
iowr I[$r1 + 0x000] $r2 // FIFO_ENABLE
// setup i0 handler, and route all interrupts to it
mov $r1 #ih
mov $iv0 $r1
mov $r1 0x400
iowr I[$r1 + 0x300] $r0 // INTR_DISPATCH
// enable fifo interrupt
mov $r2 4
iowr I[$r1 + 0x000] $r2 // INTR_EN_SET
// enable interrupts
bset $flags ie0
// figure out which GPC we are, and how many TPCs we have
mov $r1 0x608
shl b32 $r1 6
iord $r2 I[$r1 + 0x000] // UNITS
mov $r3 1
and $r2 0x1f
shl b32 $r3 $r2
sub b32 $r3 1
st b32 D[$r0 + #tpc_count] $r2
st b32 D[$r0 + #tpc_mask] $r3
add b32 $r1 0x400
iord $r2 I[$r1 + 0x000] // MYINDEX
st b32 D[$r0 + #gpc_id] $r2
// find context data for this chipset
mov $r2 0x800
shl b32 $r2 6
iord $r2 I[$r2 + 0x000] // CC_SCRATCH[0]
mov $r1 #chipsets - 12
init_find_chipset:
add b32 $r1 12
ld b32 $r3 D[$r1 + 0x00]
cmpu b32 $r3 $r2
bra e #init_context
cmpu b32 $r3 0
bra ne #init_find_chipset
// unknown chipset
ret
// initialise context base, and size tracking
init_context:
mov $r2 0x800
shl b32 $r2 6
iord $r2 I[$r2 + 0x100] // CC_SCRATCH[1], initial base
clear b32 $r3 // track GPC context size here
// set mmctx base addresses now so we don't have to do it later,
// they don't currently ever change
mov $r4 0x700
shl b32 $r4 6
shr b32 $r5 $r2 8
iowr I[$r4 + 0x000] $r5 // MMCTX_SAVE_SWBASE
iowr I[$r4 + 0x100] $r5 // MMCTX_LOAD_SWBASE
// calculate GPC mmio context size, store the chipset-specific
// mmio list pointers somewhere we can get at them later without
// re-parsing the chipset list
clear b32 $r14
clear b32 $r15
ld b16 $r14 D[$r1 + 4]
ld b16 $r15 D[$r1 + 6]
st b16 D[$r0 + #gpc_mmio_list_head] $r14
st b16 D[$r0 + #gpc_mmio_list_tail] $r15
call #mmctx_size
add b32 $r2 $r15
add b32 $r3 $r15
// calculate per-TPC mmio context size, store the list pointers
ld b16 $r14 D[$r1 + 8]
ld b16 $r15 D[$r1 + 10]
st b16 D[$r0 + #tpc_mmio_list_head] $r14
st b16 D[$r0 + #tpc_mmio_list_tail] $r15
call #mmctx_size
ld b32 $r14 D[$r0 + #tpc_count]
mulu $r14 $r15
add b32 $r2 $r14
add b32 $r3 $r14
// round up base/size to 256 byte boundary (for strand SWBASE)
add b32 $r4 0x1300
shr b32 $r3 2
iowr I[$r4 + 0x000] $r3 // MMCTX_LOAD_COUNT, wtf for?!?
shr b32 $r2 8
shr b32 $r3 6
add b32 $r2 1
add b32 $r3 1
shl b32 $r2 8
shl b32 $r3 8
// calculate size of strand context data
mov b32 $r15 $r2
call #strand_ctx_init
add b32 $r3 $r15
// save context size, and tell HUB we're done
mov $r1 0x800
shl b32 $r1 6
iowr I[$r1 + 0x100] $r3 // CC_SCRATCH[1] = context size
add b32 $r1 0x800
clear b32 $r2
bset $r2 31
iowr I[$r1 + 0x000] $r2 // CC_SCRATCH[0] |= 0x80000000
// Main program loop, very simple, sleeps until woken up by the interrupt
// handler, pulls a command from the queue and executes its handler
//
main:
bset $flags $p0
sleep $p0
mov $r13 #cmd_queue
call #queue_get
bra $p1 #main
// 0x0000-0x0003 are all context transfers
cmpu b32 $r14 0x04
bra nc #main_not_ctx_xfer
// fetch $flags and mask off $p1/$p2
mov $r1 $flags
mov $r2 0x0006
not b32 $r2
and $r1 $r2
// set $p1/$p2 according to transfer type
shl b32 $r14 1
or $r1 $r14
mov $flags $r1
// transfer context data
call #ctx_xfer
bra #main
main_not_ctx_xfer:
shl b32 $r15 $r14 16
or $r15 E_BAD_COMMAND
call #error
bra #main
// interrupt handler
ih:
push $r8
mov $r8 $flags
push $r8
push $r9
push $r10
push $r11
push $r13
push $r14
push $r15
// incoming fifo command?
iord $r10 I[$r0 + 0x200] // INTR
and $r11 $r10 0x00000004
bra e #ih_no_fifo
// queue incoming fifo command for later processing
mov $r11 0x1900
mov $r13 #cmd_queue
iord $r14 I[$r11 + 0x100] // FIFO_CMD
iord $r15 I[$r11 + 0x000] // FIFO_DATA
call #queue_put
add b32 $r11 0x400
mov $r14 1
iowr I[$r11 + 0x000] $r14 // FIFO_ACK
// ack, and wake up main()
ih_no_fifo:
iowr I[$r0 + 0x100] $r10 // INTR_ACK
pop $r15
pop $r14
pop $r13
pop $r11
pop $r10
pop $r9
pop $r8
mov $flags $r8
pop $r8
bclr $flags $p0
iret
// Set this GPC's bit in HUB_BAR, used to signal completion of various
// activities to the HUB fuc
//
hub_barrier_done:
mov $r15 1
ld b32 $r14 D[$r0 + #gpc_id]
shl b32 $r15 $r14
mov $r14 -0x6be8 // 0x409418 - HUB_BAR_SET
sethi $r14 0x400000
call #nv_wr32
ret
// Disables various things, waits a bit, and re-enables them..
//
// Not sure how exactly this helps, perhaps "ENABLE" is not such a
// good description for the bits we turn off? Anyways, without this,
// funny things happen.
//
ctx_redswitch:
mov $r14 0x614
shl b32 $r14 6
mov $r15 0x020
iowr I[$r14] $r15 // GPC_RED_SWITCH = POWER
mov $r15 8
ctx_redswitch_delay:
sub b32 $r15 1
bra ne #ctx_redswitch_delay
mov $r15 0xa20
iowr I[$r14] $r15 // GPC_RED_SWITCH = UNK11, ENABLE, POWER
ret
// Transfer GPC context data between GPU and storage area
//
// In: $r15 context base address
// $p1 clear on save, set on load
// $p2 set if opposite direction done/will be done, so:
// on save it means: "a load will follow this save"
// on load it means: "a save preceeded this load"
//
ctx_xfer:
// set context base address
mov $r1 0xa04
shl b32 $r1 6
iowr I[$r1 + 0x000] $r15// MEM_BASE
bra not $p1 #ctx_xfer_not_load
call #ctx_redswitch
ctx_xfer_not_load:
// strands
mov $r1 0x4afc
sethi $r1 0x20000
mov $r2 0xc
iowr I[$r1] $r2 // STRAND_CMD(0x3f) = 0x0c
call #strand_wait
mov $r2 0x47fc
sethi $r2 0x20000
iowr I[$r2] $r0 // STRAND_FIRST_GENE(0x3f) = 0x00
xbit $r2 $flags $p1
add b32 $r2 3
iowr I[$r1] $r2 // STRAND_CMD(0x3f) = 0x03/0x04 (SAVE/LOAD)
// mmio context
xbit $r10 $flags $p1 // direction
or $r10 2 // first
mov $r11 0x0000
sethi $r11 0x500000
ld b32 $r12 D[$r0 + #gpc_id]
shl b32 $r12 15
add b32 $r11 $r12 // base = NV_PGRAPH_GPCn
ld b32 $r12 D[$r0 + #gpc_mmio_list_head]
ld b32 $r13 D[$r0 + #gpc_mmio_list_tail]
mov $r14 0 // not multi
call #mmctx_xfer
// per-TPC mmio context
xbit $r10 $flags $p1 // direction
or $r10 4 // last
mov $r11 0x4000
sethi $r11 0x500000 // base = NV_PGRAPH_GPC0_TPC0
ld b32 $r12 D[$r0 + #gpc_id]
shl b32 $r12 15
add b32 $r11 $r12 // base = NV_PGRAPH_GPCn_TPC0
ld b32 $r12 D[$r0 + #tpc_mmio_list_head]
ld b32 $r13 D[$r0 + #tpc_mmio_list_tail]
ld b32 $r15 D[$r0 + #tpc_mask]
mov $r14 0x800 // stride = 0x800
call #mmctx_xfer
// wait for strands to finish
call #strand_wait
// if load, or a save without a load following, do some
// unknown stuff that's done after finishing a block of
// strand commands
bra $p1 #ctx_xfer_post
bra not $p2 #ctx_xfer_done
ctx_xfer_post:
mov $r1 0x4afc
sethi $r1 0x20000
mov $r2 0xd
iowr I[$r1] $r2 // STRAND_CMD(0x3f) = 0x0d
call #strand_wait
// mark completion in HUB's barrier
ctx_xfer_done:
call #hub_barrier_done
ret
#endif
drivers/gpu/drm/nouveau/core/engine/graph/fuc/gpcnvc0.fuc
浏览文件 @ e99716f1
/* fuc microcode for nvc0 PGRAPH/GPC /*
* * Copyright 2013 Red Hat Inc.
* Copyright 2011 Red Hat Inc.
* *
* Permission is hereby granted, free of charge, to any person obtaining a * Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"), * copy of this software and associated documentation files (the "Software"),
...@@ -20,32 +19,17 @@ ...@@ -20,32 +19,17 @@
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE. * OTHER DEALINGS IN THE SOFTWARE.
* *
* Authors: Ben Skeggs * Authors: Ben Skeggs <bskeggs@redhat.com>
*/ */
/* To build: #define NVGF
* m4 gpcnvc0.fuc | envyas -a -w -m fuc -V fuc3 -o gpcnvc0.fuc.h #include "macros.fuc"
*/
/* TODO
* - bracket certain functions with scratch writes, useful for debugging
* - watchdog timer around ctx operations
*/
.section #nvc0_grgpc_data .section #nvc0_grgpc_data
include(`nvc0.fuc') #define INCLUDE_DATA
gpc_id: .b32 0 #include "com.fuc"
gpc_mmio_list_head: .b32 0 #include "gpc.fuc"
gpc_mmio_list_tail: .b32 0
tpc_count: .b32 0
tpc_mask: .b32 0
tpc_mmio_list_head: .b32 0
tpc_mmio_list_tail: .b32 0
cmd_queue: queue_init
// chipset descriptions
chipsets: chipsets:
.b8 0xc0 0 0 0 .b8 0xc0 0 0 0
.b16 #nvc0_gpc_mmio_head .b16 #nvc0_gpc_mmio_head
...@@ -159,335 +143,12 @@ nvc1_tpc_mmio_tail: ...@@ -159,335 +143,12 @@ nvc1_tpc_mmio_tail:
mmctx_data(0x000424, 2); mmctx_data(0x000424, 2);
mmctx_data(0x0006e0, 1); mmctx_data(0x0006e0, 1);
nvd9_tpc_mmio_tail: nvd9_tpc_mmio_tail:
#undef INCLUDE_DATA
.section #nvc0_grgpc_code .section #nvc0_grgpc_code
#define INCLUDE_CODE
bra #init bra #init
define(`include_code') #include "com.fuc"
include(`nvc0.fuc') #include "gpc.fuc"
// reports an exception to the host
//
// In: $r15 error code (see nvc0.fuc)
//
error:
push $r14
mov $r14 -0x67ec // 0x9814
sethi $r14 0x400000
call #nv_wr32 // HUB_CTXCTL_CC_SCRATCH[5] = error code
add b32 $r14 0x41c
mov $r15 1
call #nv_wr32 // HUB_CTXCTL_INTR_UP_SET
pop $r14
ret
// GPC fuc initialisation, executed by triggering ucode start, will
// fall through to main loop after completion.
//
// Input:
// CC_SCRATCH[0]: chipset (PMC_BOOT_0 read returns 0x0bad0bad... sigh)
// CC_SCRATCH[1]: context base
//
// Output:
// CC_SCRATCH[0]:
// 31:31: set to signal completion
// CC_SCRATCH[1]:
// 31:0: GPC context size
//
init:
clear b32 $r0
mov $sp $r0
// enable fifo access
mov $r1 0x1200
mov $r2 2
iowr I[$r1 + 0x000] $r2 // FIFO_ENABLE
// setup i0 handler, and route all interrupts to it
mov $r1 #ih
mov $iv0 $r1
mov $r1 0x400
iowr I[$r1 + 0x300] $r0 // INTR_DISPATCH
// enable fifo interrupt
mov $r2 4
iowr I[$r1 + 0x000] $r2 // INTR_EN_SET
// enable interrupts
bset $flags ie0
// figure out which GPC we are, and how many TPCs we have
mov $r1 0x608
shl b32 $r1 6
iord $r2 I[$r1 + 0x000] // UNITS
mov $r3 1
and $r2 0x1f
shl b32 $r3 $r2
sub b32 $r3 1
st b32 D[$r0 + #tpc_count] $r2
st b32 D[$r0 + #tpc_mask] $r3
add b32 $r1 0x400
iord $r2 I[$r1 + 0x000] // MYINDEX
st b32 D[$r0 + #gpc_id] $r2
// find context data for this chipset
mov $r2 0x800
shl b32 $r2 6
iord $r2 I[$r2 + 0x000] // CC_SCRATCH[0]
mov $r1 #chipsets - 12
init_find_chipset:
add b32 $r1 12
ld b32 $r3 D[$r1 + 0x00]
cmpu b32 $r3 $r2
bra e #init_context
cmpu b32 $r3 0
bra ne #init_find_chipset
// unknown chipset
ret
// initialise context base, and size tracking
init_context:
mov $r2 0x800
shl b32 $r2 6
iord $r2 I[$r2 + 0x100] // CC_SCRATCH[1], initial base
clear b32 $r3 // track GPC context size here
// set mmctx base addresses now so we don't have to do it later,
// they don't currently ever change
mov $r4 0x700
shl b32 $r4 6
shr b32 $r5 $r2 8
iowr I[$r4 + 0x000] $r5 // MMCTX_SAVE_SWBASE
iowr I[$r4 + 0x100] $r5 // MMCTX_LOAD_SWBASE
// calculate GPC mmio context size, store the chipset-specific
// mmio list pointers somewhere we can get at them later without
// re-parsing the chipset list
clear b32 $r14
clear b32 $r15
ld b16 $r14 D[$r1 + 4]
ld b16 $r15 D[$r1 + 6]
st b16 D[$r0 + #gpc_mmio_list_head] $r14
st b16 D[$r0 + #gpc_mmio_list_tail] $r15
call #mmctx_size
add b32 $r2 $r15
add b32 $r3 $r15
// calculate per-TPC mmio context size, store the list pointers
ld b16 $r14 D[$r1 + 8]
ld b16 $r15 D[$r1 + 10]
st b16 D[$r0 + #tpc_mmio_list_head] $r14
st b16 D[$r0 + #tpc_mmio_list_tail] $r15
call #mmctx_size
ld b32 $r14 D[$r0 + #tpc_count]
mulu $r14 $r15
add b32 $r2 $r14
add b32 $r3 $r14
// round up base/size to 256 byte boundary (for strand SWBASE)
add b32 $r4 0x1300
shr b32 $r3 2
iowr I[$r4 + 0x000] $r3 // MMCTX_LOAD_COUNT, wtf for?!?
shr b32 $r2 8
shr b32 $r3 6
add b32 $r2 1
add b32 $r3 1
shl b32 $r2 8
shl b32 $r3 8
// calculate size of strand context data
mov b32 $r15 $r2
call #strand_ctx_init
add b32 $r3 $r15
// save context size, and tell HUB we're done
mov $r1 0x800
shl b32 $r1 6
iowr I[$r1 + 0x100] $r3 // CC_SCRATCH[1] = context size
add b32 $r1 0x800
clear b32 $r2
bset $r2 31
iowr I[$r1 + 0x000] $r2 // CC_SCRATCH[0] |= 0x80000000
// Main program loop, very simple, sleeps until woken up by the interrupt
// handler, pulls a command from the queue and executes its handler
//
main:
bset $flags $p0
sleep $p0
mov $r13 #cmd_queue
call #queue_get
bra $p1 #main
// 0x0000-0x0003 are all context transfers
cmpu b32 $r14 0x04
bra nc #main_not_ctx_xfer
// fetch $flags and mask off $p1/$p2
mov $r1 $flags
mov $r2 0x0006
not b32 $r2
and $r1 $r2
// set $p1/$p2 according to transfer type
shl b32 $r14 1
or $r1 $r14
mov $flags $r1
// transfer context data
call #ctx_xfer
bra #main
main_not_ctx_xfer:
shl b32 $r15 $r14 16
or $r15 E_BAD_COMMAND
call #error
bra #main
// interrupt handler
ih:
push $r8
mov $r8 $flags
push $r8
push $r9
push $r10
push $r11
push $r13
push $r14
push $r15
// incoming fifo command?
iord $r10 I[$r0 + 0x200] // INTR
and $r11 $r10 0x00000004
bra e #ih_no_fifo
// queue incoming fifo command for later processing
mov $r11 0x1900
mov $r13 #cmd_queue
iord $r14 I[$r11 + 0x100] // FIFO_CMD
iord $r15 I[$r11 + 0x000] // FIFO_DATA
call #queue_put
add b32 $r11 0x400
mov $r14 1
iowr I[$r11 + 0x000] $r14 // FIFO_ACK
// ack, and wake up main()
ih_no_fifo:
iowr I[$r0 + 0x100] $r10 // INTR_ACK
pop $r15
pop $r14
pop $r13
pop $r11
pop $r10
pop $r9
pop $r8
mov $flags $r8
pop $r8
bclr $flags $p0
iret
// Set this GPC's bit in HUB_BAR, used to signal completion of various
// activities to the HUB fuc
//
hub_barrier_done:
mov $r15 1
ld b32 $r14 D[$r0 + #gpc_id]
shl b32 $r15 $r14
mov $r14 -0x6be8 // 0x409418 - HUB_BAR_SET
sethi $r14 0x400000
call #nv_wr32
ret
// Disables various things, waits a bit, and re-enables them..
//
// Not sure how exactly this helps, perhaps "ENABLE" is not such a
// good description for the bits we turn off? Anyways, without this,
// funny things happen.
//
ctx_redswitch:
mov $r14 0x614
shl b32 $r14 6
mov $r15 0x020
iowr I[$r14] $r15 // GPC_RED_SWITCH = POWER
mov $r15 8
ctx_redswitch_delay:
sub b32 $r15 1
bra ne #ctx_redswitch_delay
mov $r15 0xa20
iowr I[$r14] $r15 // GPC_RED_SWITCH = UNK11, ENABLE, POWER
ret
// Transfer GPC context data between GPU and storage area
//
// In: $r15 context base address
// $p1 clear on save, set on load
// $p2 set if opposite direction done/will be done, so:
// on save it means: "a load will follow this save"
// on load it means: "a save preceeded this load"
//
ctx_xfer:
// set context base address
mov $r1 0xa04
shl b32 $r1 6
iowr I[$r1 + 0x000] $r15// MEM_BASE
bra not $p1 #ctx_xfer_not_load
call #ctx_redswitch
ctx_xfer_not_load:
// strands
mov $r1 0x4afc
sethi $r1 0x20000
mov $r2 0xc
iowr I[$r1] $r2 // STRAND_CMD(0x3f) = 0x0c
call #strand_wait
mov $r2 0x47fc
sethi $r2 0x20000
iowr I[$r2] $r0 // STRAND_FIRST_GENE(0x3f) = 0x00
xbit $r2 $flags $p1
add b32 $r2 3
iowr I[$r1] $r2 // STRAND_CMD(0x3f) = 0x03/0x04 (SAVE/LOAD)
// mmio context
xbit $r10 $flags $p1 // direction
or $r10 2 // first
mov $r11 0x0000
sethi $r11 0x500000
ld b32 $r12 D[$r0 + #gpc_id]
shl b32 $r12 15
add b32 $r11 $r12 // base = NV_PGRAPH_GPCn
ld b32 $r12 D[$r0 + #gpc_mmio_list_head]
ld b32 $r13 D[$r0 + #gpc_mmio_list_tail]
mov $r14 0 // not multi
call #mmctx_xfer
// per-TPC mmio context
xbit $r10 $flags $p1 // direction
or $r10 4 // last
mov $r11 0x4000
sethi $r11 0x500000 // base = NV_PGRAPH_GPC0_TPC0
ld b32 $r12 D[$r0 + #gpc_id]
shl b32 $r12 15
add b32 $r11 $r12 // base = NV_PGRAPH_GPCn_TPC0
ld b32 $r12 D[$r0 + #tpc_mmio_list_head]
ld b32 $r13 D[$r0 + #tpc_mmio_list_tail]
ld b32 $r15 D[$r0 + #tpc_mask]
mov $r14 0x800 // stride = 0x800
call #mmctx_xfer
// wait for strands to finish
call #strand_wait
// if load, or a save without a load following, do some
// unknown stuff that's done after finishing a block of
// strand commands
bra $p1 #ctx_xfer_post
bra not $p2 #ctx_xfer_done
ctx_xfer_post:
mov $r1 0x4afc
sethi $r1 0x20000
mov $r2 0xd
iowr I[$r1] $r2 // STRAND_CMD(0x3f) = 0x0d
call #strand_wait
// mark completion in HUB's barrier
ctx_xfer_done:
call #hub_barrier_done
ret
.align 256 .align 256
#undef INCLUDE_CODE
drivers/gpu/drm/nouveau/core/engine/graph/fuc/gpcnvc0.fuc.h
浏览文件 @ e99716f1
...@@ -192,7 +192,7 @@ uint32_t nvc0_grgpc_code[] = { ...@@ -192,7 +192,7 @@ uint32_t nvc0_grgpc_code[] = {
0x0089d000, 0x0089d000,
0x081887f1, 0x081887f1,
0xd00684b6, 0xd00684b6,
/* 0x00e2: wait_done_wait_donez */ /* 0x00e2: wait_donez_ne */
0x87f1008a, 0x87f1008a,
0x84b60400, 0x84b60400,
0x0088cf06, 0x0088cf06,
...@@ -209,7 +209,7 @@ uint32_t nvc0_grgpc_code[] = { ...@@ -209,7 +209,7 @@ uint32_t nvc0_grgpc_code[] = {
0x87f10089, 0x87f10089,
0x84b60818, 0x84b60818,
0x008ad006, 0x008ad006,
/* 0x011c: wait_done_wait_doneo */ /* 0x011c: wait_doneo_e */
0x040087f1, 0x040087f1,
0xcf0684b6, 0xcf0684b6,
0x8aff0088, 0x8aff0088,
......
drivers/gpu/drm/nouveau/core/engine/graph/fuc/gpcnve0.fuc
浏览文件 @ e99716f1
/* fuc microcode for nve0 PGRAPH/GPC /*
* * Copyright 2013 Red Hat Inc.
* Copyright 2011 Red Hat Inc.
* *
* Permission is hereby granted, free of charge, to any person obtaining a * Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"), * copy of this software and associated documentation files (the "Software"),
...@@ -20,32 +19,17 @@ ...@@ -20,32 +19,17 @@
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE. * OTHER DEALINGS IN THE SOFTWARE.
* *
* Authors: Ben Skeggs * Authors: Ben Skeggs <bskeggs@redhat.com>
*/ */
/* To build: #define NVGK
* m4 nve0_grgpc.fuc | envyas -a -w -m fuc -V nva3 -o nve0_grgpc.fuc.h #include "macros.fuc"
*/
/* TODO
* - bracket certain functions with scratch writes, useful for debugging
* - watchdog timer around ctx operations
*/
.section #nve0_grgpc_data .section #nve0_grgpc_data
include(`nve0.fuc') #define INCLUDE_DATA
gpc_id: .b32 0 #include "com.fuc"
gpc_mmio_list_head: .b32 0 #include "gpc.fuc"
gpc_mmio_list_tail: .b32 0
tpc_count: .b32 0
tpc_mask: .b32 0
tpc_mmio_list_head: .b32 0
tpc_mmio_list_tail: .b32 0
cmd_queue: queue_init
// chipset descriptions
chipsets: chipsets:
.b8 0xe4 0 0 0 .b8 0xe4 0 0 0
.b16 #nve4_gpc_mmio_head .b16 #nve4_gpc_mmio_head
...@@ -182,335 +166,12 @@ mmctx_data(0x000758, 1) ...@@ -182,335 +166,12 @@ mmctx_data(0x000758, 1)
mmctx_data(0x000770, 1) mmctx_data(0x000770, 1)
mmctx_data(0x000778, 2) mmctx_data(0x000778, 2)
nvf0_tpc_mmio_tail: nvf0_tpc_mmio_tail:
#undef INCLUDE_DATA
.section #nve0_grgpc_code .section #nve0_grgpc_code
#define INCLUDE_CODE
bra #init bra #init
define(`include_code') #include "com.fuc"
include(`nve0.fuc') #include "gpc.fuc"
// reports an exception to the host
//
// In: $r15 error code (see nve0.fuc)
//
error:
push $r14
mov $r14 -0x67ec // 0x9814
sethi $r14 0x400000
call #nv_wr32 // HUB_CTXCTL_CC_SCRATCH[5] = error code
add b32 $r14 0x41c
mov $r15 1
call #nv_wr32 // HUB_CTXCTL_INTR_UP_SET
pop $r14
ret
// GPC fuc initialisation, executed by triggering ucode start, will
// fall through to main loop after completion.
//
// Input:
// CC_SCRATCH[0]: chipset (PMC_BOOT_0 read returns 0x0bad0bad... sigh)
// CC_SCRATCH[1]: context base
//
// Output:
// CC_SCRATCH[0]:
// 31:31: set to signal completion
// CC_SCRATCH[1]:
// 31:0: GPC context size
//
init:
clear b32 $r0
mov $sp $r0
// enable fifo access
mov $r1 0x1200
mov $r2 2
iowr I[$r1 + 0x000] $r2 // FIFO_ENABLE
// setup i0 handler, and route all interrupts to it
mov $r1 #ih
mov $iv0 $r1
mov $r1 0x400
iowr I[$r1 + 0x300] $r0 // INTR_DISPATCH
// enable fifo interrupt
mov $r2 4
iowr I[$r1 + 0x000] $r2 // INTR_EN_SET
// enable interrupts
bset $flags ie0
// figure out which GPC we are, and how many TPCs we have
mov $r1 0x608
shl b32 $r1 6
iord $r2 I[$r1 + 0x000] // UNITS
mov $r3 1
and $r2 0x1f
shl b32 $r3 $r2
sub b32 $r3 1
st b32 D[$r0 + #tpc_count] $r2
st b32 D[$r0 + #tpc_mask] $r3
add b32 $r1 0x400
iord $r2 I[$r1 + 0x000] // MYINDEX
st b32 D[$r0 + #gpc_id] $r2
// find context data for this chipset
mov $r2 0x800
shl b32 $r2 6
iord $r2 I[$r2 + 0x000] // CC_SCRATCH[0]
mov $r1 #chipsets - 12
init_find_chipset:
add b32 $r1 12
ld b32 $r3 D[$r1 + 0x00]
cmpu b32 $r3 $r2
bra e #init_context
cmpu b32 $r3 0
bra ne #init_find_chipset
// unknown chipset
ret
// initialise context base, and size tracking
init_context:
mov $r2 0x800
shl b32 $r2 6
iord $r2 I[$r2 + 0x100] // CC_SCRATCH[1], initial base
clear b32 $r3 // track GPC context size here
// set mmctx base addresses now so we don't have to do it later,
// they don't currently ever change
mov $r4 0x700
shl b32 $r4 6
shr b32 $r5 $r2 8
iowr I[$r4 + 0x000] $r5 // MMCTX_SAVE_SWBASE
iowr I[$r4 + 0x100] $r5 // MMCTX_LOAD_SWBASE
// calculate GPC mmio context size, store the chipset-specific
// mmio list pointers somewhere we can get at them later without
// re-parsing the chipset list
clear b32 $r14
clear b32 $r15
ld b16 $r14 D[$r1 + 4]
ld b16 $r15 D[$r1 + 6]
st b16 D[$r0 + #gpc_mmio_list_head] $r14
st b16 D[$r0 + #gpc_mmio_list_tail] $r15
call #mmctx_size
add b32 $r2 $r15
add b32 $r3 $r15
// calculate per-TPC mmio context size, store the list pointers
ld b16 $r14 D[$r1 + 8]
ld b16 $r15 D[$r1 + 10]
st b16 D[$r0 + #tpc_mmio_list_head] $r14
st b16 D[$r0 + #tpc_mmio_list_tail] $r15
call #mmctx_size
ld b32 $r14 D[$r0 + #tpc_count]
mulu $r14 $r15
add b32 $r2 $r14
add b32 $r3 $r14
// round up base/size to 256 byte boundary (for strand SWBASE)
add b32 $r4 0x1300
shr b32 $r3 2
iowr I[$r4 + 0x000] $r3 // MMCTX_LOAD_COUNT, wtf for?!?
shr b32 $r2 8
shr b32 $r3 6
add b32 $r2 1
add b32 $r3 1
shl b32 $r2 8
shl b32 $r3 8
// calculate size of strand context data
mov b32 $r15 $r2
call #strand_ctx_init
add b32 $r3 $r15
// save context size, and tell HUB we're done
mov $r1 0x800
shl b32 $r1 6
iowr I[$r1 + 0x100] $r3 // CC_SCRATCH[1] = context size
add b32 $r1 0x800
clear b32 $r2
bset $r2 31
iowr I[$r1 + 0x000] $r2 // CC_SCRATCH[0] |= 0x80000000
// Main program loop, very simple, sleeps until woken up by the interrupt
// handler, pulls a command from the queue and executes its handler
//
main:
bset $flags $p0
sleep $p0
mov $r13 #cmd_queue
call #queue_get
bra $p1 #main
// 0x0000-0x0003 are all context transfers
cmpu b32 $r14 0x04
bra nc #main_not_ctx_xfer
// fetch $flags and mask off $p1/$p2
mov $r1 $flags
mov $r2 0x0006
not b32 $r2
and $r1 $r2
// set $p1/$p2 according to transfer type
shl b32 $r14 1
or $r1 $r14
mov $flags $r1
// transfer context data
call #ctx_xfer
bra #main
main_not_ctx_xfer:
shl b32 $r15 $r14 16
or $r15 E_BAD_COMMAND
call #error
bra #main
// interrupt handler
ih:
push $r8
mov $r8 $flags
push $r8
push $r9
push $r10
push $r11
push $r13
push $r14
push $r15
// incoming fifo command?
iord $r10 I[$r0 + 0x200] // INTR
and $r11 $r10 0x00000004
bra e #ih_no_fifo
// queue incoming fifo command for later processing
mov $r11 0x1900
mov $r13 #cmd_queue
iord $r14 I[$r11 + 0x100] // FIFO_CMD
iord $r15 I[$r11 + 0x000] // FIFO_DATA
call #queue_put
add b32 $r11 0x400
mov $r14 1
iowr I[$r11 + 0x000] $r14 // FIFO_ACK
// ack, and wake up main()
ih_no_fifo:
iowr I[$r0 + 0x100] $r10 // INTR_ACK
pop $r15
pop $r14
pop $r13
pop $r11
pop $r10
pop $r9
pop $r8
mov $flags $r8
pop $r8
bclr $flags $p0
iret
// Set this GPC's bit in HUB_BAR, used to signal completion of various
// activities to the HUB fuc
//
hub_barrier_done:
mov $r15 1
ld b32 $r14 D[$r0 + #gpc_id]
shl b32 $r15 $r14
mov $r14 -0x6be8 // 0x409418 - HUB_BAR_SET
sethi $r14 0x400000
call #nv_wr32
ret
// Disables various things, waits a bit, and re-enables them..
//
// Not sure how exactly this helps, perhaps "ENABLE" is not such a
// good description for the bits we turn off? Anyways, without this,
// funny things happen.
//
ctx_redswitch:
mov $r14 0x614
shl b32 $r14 6
mov $r15 0x020
iowr I[$r14] $r15 // GPC_RED_SWITCH = POWER
mov $r15 8
ctx_redswitch_delay:
sub b32 $r15 1
bra ne #ctx_redswitch_delay
mov $r15 0xa20
iowr I[$r14] $r15 // GPC_RED_SWITCH = UNK11, ENABLE, POWER
ret
// Transfer GPC context data between GPU and storage area
//
// In: $r15 context base address
// $p1 clear on save, set on load
// $p2 set if opposite direction done/will be done, so:
// on save it means: "a load will follow this save"
// on load it means: "a save preceeded this load"
//
ctx_xfer:
// set context base address
mov $r1 0xa04
shl b32 $r1 6
iowr I[$r1 + 0x000] $r15// MEM_BASE
bra not $p1 #ctx_xfer_not_load
call #ctx_redswitch
ctx_xfer_not_load:
// strands
mov $r1 0x4afc
sethi $r1 0x20000
mov $r2 0xc
iowr I[$r1] $r2 // STRAND_CMD(0x3f) = 0x0c
call #strand_wait
mov $r2 0x47fc
sethi $r2 0x20000
iowr I[$r2] $r0 // STRAND_FIRST_GENE(0x3f) = 0x00
xbit $r2 $flags $p1
add b32 $r2 3
iowr I[$r1] $r2 // STRAND_CMD(0x3f) = 0x03/0x04 (SAVE/LOAD)
// mmio context
xbit $r10 $flags $p1 // direction
or $r10 2 // first
mov $r11 0x0000
sethi $r11 0x500000
ld b32 $r12 D[$r0 + #gpc_id]
shl b32 $r12 15
add b32 $r11 $r12 // base = NV_PGRAPH_GPCn
ld b32 $r12 D[$r0 + #gpc_mmio_list_head]
ld b32 $r13 D[$r0 + #gpc_mmio_list_tail]
mov $r14 0 // not multi
call #mmctx_xfer
// per-TPC mmio context
xbit $r10 $flags $p1 // direction
or $r10 4 // last
mov $r11 0x4000
sethi $r11 0x500000 // base = NV_PGRAPH_GPC0_TPC0
ld b32 $r12 D[$r0 + #gpc_id]
shl b32 $r12 15
add b32 $r11 $r12 // base = NV_PGRAPH_GPCn_TPC0
ld b32 $r12 D[$r0 + #tpc_mmio_list_head]
ld b32 $r13 D[$r0 + #tpc_mmio_list_tail]
ld b32 $r15 D[$r0 + #tpc_mask]
mov $r14 0x800 // stride = 0x800
call #mmctx_xfer
// wait for strands to finish
call #strand_wait
// if load, or a save without a load following, do some
// unknown stuff that's done after finishing a block of
// strand commands
bra $p1 #ctx_xfer_post
bra not $p2 #ctx_xfer_done
ctx_xfer_post:
mov $r1 0x4afc
sethi $r1 0x20000
mov $r2 0xd
iowr I[$r1] $r2 // STRAND_CMD(0x3f) = 0x0d
call #strand_wait
// mark completion in HUB's barrier
ctx_xfer_done:
call #hub_barrier_done
ret
.align 256 .align 256
#undef INCLUDE_CODE
drivers/gpu/drm/nouveau/core/engine/graph/fuc/gpcnve0.fuc.h
浏览文件 @ e99716f1
...@@ -223,7 +223,7 @@ uint32_t nve0_grgpc_code[] = { ...@@ -223,7 +223,7 @@ uint32_t nve0_grgpc_code[] = {
0x0089d000, 0x0089d000,
0x081887f1, 0x081887f1,
0xd00684b6, 0xd00684b6,
/* 0x00e2: wait_done_wait_donez */ /* 0x00e2: wait_donez_ne */
0x87f1008a, 0x87f1008a,
0x84b60400, 0x84b60400,
0x0088cf06, 0x0088cf06,
...@@ -240,7 +240,7 @@ uint32_t nve0_grgpc_code[] = { ...@@ -240,7 +240,7 @@ uint32_t nve0_grgpc_code[] = {
0x87f10089, 0x87f10089,
0x84b60818, 0x84b60818,
0x008ad006, 0x008ad006,
/* 0x011c: wait_done_wait_doneo */ /* 0x011c: wait_doneo_e */
0x040087f1, 0x040087f1,
0xcf0684b6, 0xcf0684b6,
0x8aff0088, 0x8aff0088,
......
drivers/gpu/drm/nouveau/core/engine/graph/fuc/hub.fuc 0 → 100644
浏览文件 @ e99716f1
/* fuc microcode for nvc0 PGRAPH/HUB
*
* Copyright 2011 Red Hat Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors: Ben Skeggs
*/
#ifdef INCLUDE_DATA
gpc_count: .b32 0
rop_count: .b32 0
cmd_queue: queue_init
hub_mmio_list_head: .b32 0
hub_mmio_list_tail: .b32 0
ctx_current: .b32 0
.align 256
chan_data:
chan_mmio_count: .b32 0
chan_mmio_address: .b32 0
.align 256
xfer_data: .skip 256
#endif
#ifdef INCLUDE_CODE
// reports an exception to the host
//
// In: $r15 error code (see nvc0.fuc)
//
error:
push $r14
mov $r14 0x814
shl b32 $r14 6
iowr I[$r14 + 0x000] $r15 // CC_SCRATCH[5] = error code
mov $r14 0xc1c
shl b32 $r14 6
mov $r15 1
iowr I[$r14 + 0x000] $r15 // INTR_UP_SET
pop $r14
ret
// HUB fuc initialisation, executed by triggering ucode start, will
// fall through to main loop after completion.
//
// Input:
// CC_SCRATCH[0]: chipset (PMC_BOOT_0 read returns 0x0bad0bad... sigh)
//
// Output:
// CC_SCRATCH[0]:
// 31:31: set to signal completion
// CC_SCRATCH[1]:
// 31:0: total PGRAPH context size
//
init:
clear b32 $r0
mov $sp $r0
mov $xdbase $r0
// enable fifo access
mov $r1 0x1200
mov $r2 2
iowr I[$r1 + 0x000] $r2 // FIFO_ENABLE
// setup i0 handler, and route all interrupts to it
mov $r1 #ih
mov $iv0 $r1
mov $r1 0x400
iowr I[$r1 + 0x300] $r0 // INTR_DISPATCH
// route HUB_CHANNEL_SWITCH to fuc interrupt 8
mov $r3 0x404
shl b32 $r3 6
mov $r2 0x2003 // { HUB_CHANNEL_SWITCH, ZERO } -> intr 8
iowr I[$r3 + 0x000] $r2
// not sure what these are, route them because NVIDIA does, and
// the IRQ handler will signal the host if we ever get one.. we
// may find out if/why we need to handle these if so..
//
mov $r2 0x2004
iowr I[$r3 + 0x004] $r2 // { 0x04, ZERO } -> intr 9
mov $r2 0x200b
iowr I[$r3 + 0x008] $r2 // { 0x0b, ZERO } -> intr 10
mov $r2 0x200c
iowr I[$r3 + 0x01c] $r2 // { 0x0c, ZERO } -> intr 15
// enable all INTR_UP interrupts
mov $r2 0xc24
shl b32 $r2 6
not b32 $r3 $r0
iowr I[$r2] $r3
// enable fifo, ctxsw, 9, 10, 15 interrupts
mov $r2 -0x78fc // 0x8704
sethi $r2 0
iowr I[$r1 + 0x000] $r2 // INTR_EN_SET
// fifo level triggered, rest edge
sub b32 $r1 0x100
mov $r2 4
iowr I[$r1] $r2
// enable interrupts
bset $flags ie0
// fetch enabled GPC/ROP counts
mov $r14 -0x69fc // 0x409604
sethi $r14 0x400000
call #nv_rd32
extr $r1 $r15 16:20
st b32 D[$r0 + #rop_count] $r1
and $r15 0x1f
st b32 D[$r0 + #gpc_count] $r15
// set BAR_REQMASK to GPC mask
mov $r1 1
shl b32 $r1 $r15
sub b32 $r1 1
mov $r2 0x40c
shl b32 $r2 6
iowr I[$r2 + 0x000] $r1
iowr I[$r2 + 0x100] $r1
// find context data for this chipset
mov $r2 0x800
shl b32 $r2 6
iord $r2 I[$r2 + 0x000] // CC_SCRATCH[0]
mov $r15 #chipsets - 8
init_find_chipset:
add b32 $r15 8
ld b32 $r3 D[$r15 + 0x00]
cmpu b32 $r3 $r2
bra e #init_context
cmpu b32 $r3 0
bra ne #init_find_chipset
// unknown chipset
ret
// context size calculation, reserve first 256 bytes for use by fuc
init_context:
mov $r1 256
// calculate size of mmio context data
ld b16 $r14 D[$r15 + 4]
ld b16 $r15 D[$r15 + 6]
sethi $r14 0
st b32 D[$r0 + #hub_mmio_list_head] $r14
st b32 D[$r0 + #hub_mmio_list_tail] $r15
call #mmctx_size
// set mmctx base addresses now so we don't have to do it later,
// they don't (currently) ever change
mov $r3 0x700
shl b32 $r3 6
shr b32 $r4 $r1 8
iowr I[$r3 + 0x000] $r4 // MMCTX_SAVE_SWBASE
iowr I[$r3 + 0x100] $r4 // MMCTX_LOAD_SWBASE
add b32 $r3 0x1300
add b32 $r1 $r15
shr b32 $r15 2
iowr I[$r3 + 0x000] $r15 // MMCTX_LOAD_COUNT, wtf for?!?
// strands, base offset needs to be aligned to 256 bytes
shr b32 $r1 8
add b32 $r1 1
shl b32 $r1 8
mov b32 $r15 $r1
call #strand_ctx_init
add b32 $r1 $r15
// initialise each GPC in sequence by passing in the offset of its
// context data in GPCn_CC_SCRATCH[1], and starting its FUC (which
// has previously been uploaded by the host) running.
//
// the GPC fuc init sequence will set GPCn_CC_SCRATCH[0] bit 31
// when it has completed, and return the size of its context data
// in GPCn_CC_SCRATCH[1]
//
ld b32 $r3 D[$r0 + #gpc_count]
mov $r4 0x2000
sethi $r4 0x500000
init_gpc:
// setup, and start GPC ucode running
add b32 $r14 $r4 0x804
mov b32 $r15 $r1
call #nv_wr32 // CC_SCRATCH[1] = ctx offset
add b32 $r14 $r4 0x800
mov b32 $r15 $r2
call #nv_wr32 // CC_SCRATCH[0] = chipset
add b32 $r14 $r4 0x10c
clear b32 $r15
call #nv_wr32
add b32 $r14 $r4 0x104
call #nv_wr32 // ENTRY
add b32 $r14 $r4 0x100
mov $r15 2 // CTRL_START_TRIGGER
call #nv_wr32 // CTRL
// wait for it to complete, and adjust context size
add b32 $r14 $r4 0x800
init_gpc_wait:
call #nv_rd32
xbit $r15 $r15 31
bra e #init_gpc_wait
add b32 $r14 $r4 0x804
call #nv_rd32
add b32 $r1 $r15
// next!
add b32 $r4 0x8000
sub b32 $r3 1
bra ne #init_gpc
// save context size, and tell host we're ready
mov $r2 0x800
shl b32 $r2 6
iowr I[$r2 + 0x100] $r1 // CC_SCRATCH[1] = context size
add b32 $r2 0x800
clear b32 $r1
bset $r1 31
iowr I[$r2 + 0x000] $r1 // CC_SCRATCH[0] |= 0x80000000
// Main program loop, very simple, sleeps until woken up by the interrupt
// handler, pulls a command from the queue and executes its handler
//
main:
// sleep until we have something to do
bset $flags $p0
sleep $p0
mov $r13 #cmd_queue
call #queue_get
bra $p1 #main
// context switch, requested by GPU?
cmpu b32 $r14 0x4001
bra ne #main_not_ctx_switch
trace_set(T_AUTO)
mov $r1 0xb00
shl b32 $r1 6
iord $r2 I[$r1 + 0x100] // CHAN_NEXT
iord $r1 I[$r1 + 0x000] // CHAN_CUR
xbit $r3 $r1 31
bra e #chsw_no_prev
xbit $r3 $r2 31
bra e #chsw_prev_no_next
push $r2
mov b32 $r2 $r1
trace_set(T_SAVE)
bclr $flags $p1
bset $flags $p2
call #ctx_xfer
trace_clr(T_SAVE);
pop $r2
trace_set(T_LOAD);
bset $flags $p1
call #ctx_xfer
trace_clr(T_LOAD);
bra #chsw_done
chsw_prev_no_next:
push $r2
mov b32 $r2 $r1
bclr $flags $p1
bclr $flags $p2
call #ctx_xfer
pop $r2
mov $r1 0xb00
shl b32 $r1 6
iowr I[$r1] $r2
bra #chsw_done
chsw_no_prev:
xbit $r3 $r2 31
bra e #chsw_done
bset $flags $p1
bclr $flags $p2
call #ctx_xfer
// ack the context switch request
chsw_done:
mov $r1 0xb0c
shl b32 $r1 6
mov $r2 1
iowr I[$r1 + 0x000] $r2 // 0x409b0c
trace_clr(T_AUTO)
bra #main
// request to set current channel? (*not* a context switch)
main_not_ctx_switch:
cmpu b32 $r14 0x0001
bra ne #main_not_ctx_chan
mov b32 $r2 $r15
call #ctx_chan
bra #main_done
// request to store current channel context?
main_not_ctx_chan:
cmpu b32 $r14 0x0002
bra ne #main_not_ctx_save
trace_set(T_SAVE)
bclr $flags $p1
bclr $flags $p2
call #ctx_xfer
trace_clr(T_SAVE)
bra #main_done
main_not_ctx_save:
shl b32 $r15 $r14 16
or $r15 E_BAD_COMMAND
call #error
bra #main
main_done:
mov $r1 0x820
shl b32 $r1 6
clear b32 $r2
bset $r2 31
iowr I[$r1 + 0x000] $r2 // CC_SCRATCH[0] |= 0x80000000
bra #main
// interrupt handler
ih:
push $r8
mov $r8 $flags
push $r8
push $r9
push $r10
push $r11
push $r13
push $r14
push $r15
// incoming fifo command?
iord $r10 I[$r0 + 0x200] // INTR
and $r11 $r10 0x00000004
bra e #ih_no_fifo
// queue incoming fifo command for later processing
mov $r11 0x1900
mov $r13 #cmd_queue
iord $r14 I[$r11 + 0x100] // FIFO_CMD
iord $r15 I[$r11 + 0x000] // FIFO_DATA
call #queue_put
add b32 $r11 0x400
mov $r14 1
iowr I[$r11 + 0x000] $r14 // FIFO_ACK
// context switch request?
ih_no_fifo:
and $r11 $r10 0x00000100
bra e #ih_no_ctxsw
// enqueue a context switch for later processing
mov $r13 #cmd_queue
mov $r14 0x4001
call #queue_put
// anything we didn't handle, bring it to the host's attention
ih_no_ctxsw:
mov $r11 0x104
not b32 $r11
and $r11 $r10 $r11
bra e #ih_no_other
mov $r10 0xc1c
shl b32 $r10 6
iowr I[$r10] $r11 // INTR_UP_SET
// ack, and wake up main()
ih_no_other:
iowr I[$r0 + 0x100] $r10 // INTR_ACK
pop $r15
pop $r14
pop $r13
pop $r11
pop $r10
pop $r9
pop $r8
mov $flags $r8
pop $r8
bclr $flags $p0
iret
#ifdef NVGF
// Not real sure, but, MEM_CMD 7 will hang forever if this isn't done
ctx_4160s:
mov $r14 0x4160
sethi $r14 0x400000
mov $r15 1
call #nv_wr32
ctx_4160s_wait:
call #nv_rd32
xbit $r15 $r15 4
bra e #ctx_4160s_wait
ret
// Without clearing again at end of xfer, some things cause PGRAPH
// to hang with STATUS=0x00000007 until it's cleared.. fbcon can
// still function with it set however...
ctx_4160c:
mov $r14 0x4160
sethi $r14 0x400000
clear b32 $r15
call #nv_wr32
ret
#endif
// Again, not real sure
//
// In: $r15 value to set 0x404170 to
//
ctx_4170s:
mov $r14 0x4170
sethi $r14 0x400000
or $r15 0x10
call #nv_wr32
ret
// Waits for a ctx_4170s() call to complete
//
ctx_4170w:
mov $r14 0x4170
sethi $r14 0x400000
call #nv_rd32
and $r15 0x10
bra ne #ctx_4170w
ret
// Disables various things, waits a bit, and re-enables them..
//
// Not sure how exactly this helps, perhaps "ENABLE" is not such a
// good description for the bits we turn off? Anyways, without this,
// funny things happen.
//
ctx_redswitch:
mov $r14 0x614
shl b32 $r14 6
mov $r15 0x270
iowr I[$r14] $r15 // HUB_RED_SWITCH = ENABLE_GPC, POWER_ALL
mov $r15 8
ctx_redswitch_delay:
sub b32 $r15 1
bra ne #ctx_redswitch_delay
mov $r15 0x770
iowr I[$r14] $r15 // HUB_RED_SWITCH = ENABLE_ALL, POWER_ALL
ret
// Not a clue what this is for, except that unless the value is 0x10, the
// strand context is saved (and presumably restored) incorrectly..
//
// In: $r15 value to set to (0x00/0x10 are used)
//
ctx_86c:
mov $r14 0x86c
shl b32 $r14 6
iowr I[$r14] $r15 // HUB(0x86c) = val
mov $r14 -0x75ec
sethi $r14 0x400000
call #nv_wr32 // ROP(0xa14) = val
mov $r14 -0x5794
sethi $r14 0x410000
call #nv_wr32 // GPC(0x86c) = val
ret
// ctx_load - load's a channel's ctxctl data, and selects its vm
//
// In: $r2 channel address
//
ctx_load:
trace_set(T_CHAN)
// switch to channel, somewhat magic in parts..
mov $r10 12 // DONE_UNK12
call #wait_donez
mov $r1 0xa24
shl b32 $r1 6
iowr I[$r1 + 0x000] $r0 // 0x409a24
mov $r3 0xb00
shl b32 $r3 6
iowr I[$r3 + 0x100] $r2 // CHAN_NEXT
mov $r1 0xa0c
shl b32 $r1 6
mov $r4 7
iowr I[$r1 + 0x000] $r2 // MEM_CHAN
iowr I[$r1 + 0x100] $r4 // MEM_CMD
ctx_chan_wait_0:
iord $r4 I[$r1 + 0x100]
and $r4 0x1f
bra ne #ctx_chan_wait_0
iowr I[$r3 + 0x000] $r2 // CHAN_CUR
// load channel header, fetch PGRAPH context pointer
mov $xtargets $r0
bclr $r2 31
shl b32 $r2 4
add b32 $r2 2
trace_set(T_LCHAN)
mov $r1 0xa04
shl b32 $r1 6
iowr I[$r1 + 0x000] $r2 // MEM_BASE
mov $r1 0xa20
shl b32 $r1 6
mov $r2 0x0002
sethi $r2 0x80000000
iowr I[$r1 + 0x000] $r2 // MEM_TARGET = vram
mov $r1 0x10 // chan + 0x0210
mov $r2 #xfer_data
sethi $r2 0x00020000 // 16 bytes
xdld $r1 $r2
xdwait
trace_clr(T_LCHAN)
// update current context
ld b32 $r1 D[$r0 + #xfer_data + 4]
shl b32 $r1 24
ld b32 $r2 D[$r0 + #xfer_data + 0]
shr b32 $r2 8
or $r1 $r2
st b32 D[$r0 + #ctx_current] $r1
// set transfer base to start of context, and fetch context header
trace_set(T_LCTXH)
mov $r2 0xa04
shl b32 $r2 6
iowr I[$r2 + 0x000] $r1 // MEM_BASE
mov $r2 1
mov $r1 0xa20
shl b32 $r1 6
iowr I[$r1 + 0x000] $r2 // MEM_TARGET = vm
mov $r1 #chan_data
sethi $r1 0x00060000 // 256 bytes
xdld $r0 $r1
xdwait
trace_clr(T_LCTXH)
trace_clr(T_CHAN)
ret
// ctx_chan - handler for HUB_SET_CHAN command, will set a channel as
// the active channel for ctxctl, but not actually transfer
// any context data. intended for use only during initial
// context construction.
//
// In: $r2 channel address
//
ctx_chan:
#ifdef NVGF
call #ctx_4160s
#endif
call #ctx_load
mov $r10 12 // DONE_UNK12
call #wait_donez
mov $r1 0xa10
shl b32 $r1 6
mov $r2 5
iowr I[$r1 + 0x000] $r2 // MEM_CMD = 5 (???)
ctx_chan_wait:
iord $r2 I[$r1 + 0x000]
or $r2 $r2
bra ne #ctx_chan_wait
#ifdef NVGF
call #ctx_4160c
#endif
ret
// Execute per-context state overrides list
//
// Only executed on the first load of a channel. Might want to look into
// removing this and having the host directly modify the channel's context
// to change this state... The nouveau DRM already builds this list as
// it's definitely needed for NVIDIA's, so we may as well use it for now
//
// Input: $r1 mmio list length
//
ctx_mmio_exec:
// set transfer base to be the mmio list
ld b32 $r3 D[$r0 + #chan_mmio_address]
mov $r2 0xa04
shl b32 $r2 6
iowr I[$r2 + 0x000] $r3 // MEM_BASE
clear b32 $r3
ctx_mmio_loop:
// fetch next 256 bytes of mmio list if necessary
and $r4 $r3 0xff
bra ne #ctx_mmio_pull
mov $r5 #xfer_data
sethi $r5 0x00060000 // 256 bytes
xdld $r3 $r5
xdwait
// execute a single list entry
ctx_mmio_pull:
ld b32 $r14 D[$r4 + #xfer_data + 0x00]
ld b32 $r15 D[$r4 + #xfer_data + 0x04]
call #nv_wr32
// next!
add b32 $r3 8
sub b32 $r1 1
bra ne #ctx_mmio_loop
// set transfer base back to the current context
ctx_mmio_done:
ld b32 $r3 D[$r0 + #ctx_current]
iowr I[$r2 + 0x000] $r3 // MEM_BASE
// disable the mmio list now, we don't need/want to execute it again
st b32 D[$r0 + #chan_mmio_count] $r0
mov $r1 #chan_data
sethi $r1 0x00060000 // 256 bytes
xdst $r0 $r1
xdwait
ret
// Transfer HUB context data between GPU and storage area
//
// In: $r2 channel address
// $p1 clear on save, set on load
// $p2 set if opposite direction done/will be done, so:
// on save it means: "a load will follow this save"
// on load it means: "a save preceeded this load"
//
ctx_xfer:
// according to mwk, some kind of wait for idle
mov $r15 0xc00
shl b32 $r15 6
mov $r14 4
iowr I[$r15 + 0x200] $r14
ctx_xfer_idle:
iord $r14 I[$r15 + 0x000]
and $r14 0x2000
bra ne #ctx_xfer_idle
bra not $p1 #ctx_xfer_pre
bra $p2 #ctx_xfer_pre_load
ctx_xfer_pre:
mov $r15 0x10
call #ctx_86c
#ifdef NVGF
call #ctx_4160s
#endif
bra not $p1 #ctx_xfer_exec
ctx_xfer_pre_load:
mov $r15 2
call #ctx_4170s
call #ctx_4170w
call #ctx_redswitch
clear b32 $r15
call #ctx_4170s
call #ctx_load
// fetch context pointer, and initiate xfer on all GPCs
ctx_xfer_exec:
ld b32 $r1 D[$r0 + #ctx_current]
mov $r2 0x414
shl b32 $r2 6
iowr I[$r2 + 0x000] $r0 // BAR_STATUS = reset
mov $r14 -0x5b00
sethi $r14 0x410000
mov b32 $r15 $r1
call #nv_wr32 // GPC_BCAST_WRCMD_DATA = ctx pointer
add b32 $r14 4
xbit $r15 $flags $p1
xbit $r2 $flags $p2
shl b32 $r2 1
or $r15 $r2
call #nv_wr32 // GPC_BCAST_WRCMD_CMD = GPC_XFER(type)
// strands
mov $r1 0x4afc
sethi $r1 0x20000
mov $r2 0xc
iowr I[$r1] $r2 // STRAND_CMD(0x3f) = 0x0c
call #strand_wait
mov $r2 0x47fc
sethi $r2 0x20000
iowr I[$r2] $r0 // STRAND_FIRST_GENE(0x3f) = 0x00
xbit $r2 $flags $p1
add b32 $r2 3
iowr I[$r1] $r2 // STRAND_CMD(0x3f) = 0x03/0x04 (SAVE/LOAD)
// mmio context
xbit $r10 $flags $p1 // direction
or $r10 6 // first, last
mov $r11 0 // base = 0
ld b32 $r12 D[$r0 + #hub_mmio_list_head]
ld b32 $r13 D[$r0 + #hub_mmio_list_tail]
mov $r14 0 // not multi
call #mmctx_xfer
// wait for GPCs to all complete
mov $r10 8 // DONE_BAR
call #wait_doneo
// wait for strand xfer to complete
call #strand_wait
// post-op
bra $p1 #ctx_xfer_post
mov $r10 12 // DONE_UNK12
call #wait_donez
mov $r1 0xa10
shl b32 $r1 6
mov $r2 5
iowr I[$r1] $r2 // MEM_CMD
ctx_xfer_post_save_wait:
iord $r2 I[$r1]
or $r2 $r2
bra ne #ctx_xfer_post_save_wait
bra $p2 #ctx_xfer_done
ctx_xfer_post:
mov $r15 2
call #ctx_4170s
clear b32 $r15
call #ctx_86c
call #strand_post
call #ctx_4170w
clear b32 $r15
call #ctx_4170s
bra not $p1 #ctx_xfer_no_post_mmio
ld b32 $r1 D[$r0 + #chan_mmio_count]
or $r1 $r1
bra e #ctx_xfer_no_post_mmio
call #ctx_mmio_exec
ctx_xfer_no_post_mmio:
#ifdef NVGF
call #ctx_4160c
#endif
ctx_xfer_done:
ret
#endif
drivers/gpu/drm/nouveau/core/engine/graph/fuc/hubnvc0.fuc
浏览文件 @ e99716f1
/* fuc microcode for nvc0 PGRAPH/HUB /*
* * Copyright 2013 Red Hat Inc.
* Copyright 2011 Red Hat Inc.
* *
* Permission is hereby granted, free of charge, to any person obtaining a * Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"), * copy of this software and associated documentation files (the "Software"),
...@@ -20,32 +19,17 @@ ...@@ -20,32 +19,17 @@
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE. * OTHER DEALINGS IN THE SOFTWARE.
* *
* Authors: Ben Skeggs * Authors: Ben Skeggs <bskeggs@redhat.com>
*/ */
/* To build: #define NVGF
* m4 hubnvc0.fuc | envyas -a -w -m fuc -V fuc3 -o hubnvc0.fuc.h #include "macros.fuc"
*/
.section #nvc0_grhub_data .section #nvc0_grhub_data
include(`nvc0.fuc') #define INCLUDE_DATA
gpc_count: .b32 0 #include "com.fuc"
rop_count: .b32 0 #include "hub.fuc"
cmd_queue: queue_init
hub_mmio_list_head: .b32 0
hub_mmio_list_tail: .b32 0
ctx_current: .b32 0
.align 256
chan_data:
chan_mmio_count: .b32 0
chan_mmio_address: .b32 0
.align 256
xfer_data: .b32 0
.align 256
chipsets: chipsets:
.b8 0xc0 0 0 0 .b8 0xc0 0 0 0
.b16 #nvc0_hub_mmio_head .b16 #nvc0_hub_mmio_head
...@@ -124,710 +108,12 @@ mmctx_data(0x4064c0, 2) ...@@ -124,710 +108,12 @@ mmctx_data(0x4064c0, 2)
nvc1_hub_mmio_tail: nvc1_hub_mmio_tail:
mmctx_data(0x4064bc, 3) mmctx_data(0x4064bc, 3)
nvd9_hub_mmio_tail: nvd9_hub_mmio_tail:
#undef INCLUDE_DATA
.section #nvc0_grhub_code .section #nvc0_grhub_code
#define INCLUDE_CODE
bra #init bra #init
define(`include_code') #include "com.fuc"
include(`nvc0.fuc') #include "hub.fuc"
// reports an exception to the host
//
// In: $r15 error code (see nvc0.fuc)
//
error:
push $r14
mov $r14 0x814
shl b32 $r14 6
iowr I[$r14 + 0x000] $r15 // CC_SCRATCH[5] = error code
mov $r14 0xc1c
shl b32 $r14 6
mov $r15 1
iowr I[$r14 + 0x000] $r15 // INTR_UP_SET
pop $r14
ret
// HUB fuc initialisation, executed by triggering ucode start, will
// fall through to main loop after completion.
//
// Input:
// CC_SCRATCH[0]: chipset (PMC_BOOT_0 read returns 0x0bad0bad... sigh)
//
// Output:
// CC_SCRATCH[0]:
// 31:31: set to signal completion
// CC_SCRATCH[1]:
// 31:0: total PGRAPH context size
//
init:
clear b32 $r0
mov $sp $r0
mov $xdbase $r0
// enable fifo access
mov $r1 0x1200
mov $r2 2
iowr I[$r1 + 0x000] $r2 // FIFO_ENABLE
// setup i0 handler, and route all interrupts to it
mov $r1 #ih
mov $iv0 $r1
mov $r1 0x400
iowr I[$r1 + 0x300] $r0 // INTR_DISPATCH
// route HUB_CHANNEL_SWITCH to fuc interrupt 8
mov $r3 0x404
shl b32 $r3 6
mov $r2 0x2003 // { HUB_CHANNEL_SWITCH, ZERO } -> intr 8
iowr I[$r3 + 0x000] $r2
// not sure what these are, route them because NVIDIA does, and
// the IRQ handler will signal the host if we ever get one.. we
// may find out if/why we need to handle these if so..
//
mov $r2 0x2004
iowr I[$r3 + 0x004] $r2 // { 0x04, ZERO } -> intr 9
mov $r2 0x200b
iowr I[$r3 + 0x008] $r2 // { 0x0b, ZERO } -> intr 10
mov $r2 0x200c
iowr I[$r3 + 0x01c] $r2 // { 0x0c, ZERO } -> intr 15
// enable all INTR_UP interrupts
mov $r2 0xc24
shl b32 $r2 6
not b32 $r3 $r0
iowr I[$r2] $r3
// enable fifo, ctxsw, 9, 10, 15 interrupts
mov $r2 -0x78fc // 0x8704
sethi $r2 0
iowr I[$r1 + 0x000] $r2 // INTR_EN_SET
// fifo level triggered, rest edge
sub b32 $r1 0x100
mov $r2 4
iowr I[$r1] $r2
// enable interrupts
bset $flags ie0
// fetch enabled GPC/ROP counts
mov $r14 -0x69fc // 0x409604
sethi $r14 0x400000
call #nv_rd32
extr $r1 $r15 16:20
st b32 D[$r0 + #rop_count] $r1
and $r15 0x1f
st b32 D[$r0 + #gpc_count] $r15
// set BAR_REQMASK to GPC mask
mov $r1 1
shl b32 $r1 $r15
sub b32 $r1 1
mov $r2 0x40c
shl b32 $r2 6
iowr I[$r2 + 0x000] $r1
iowr I[$r2 + 0x100] $r1
// find context data for this chipset
mov $r2 0x800
shl b32 $r2 6
iord $r2 I[$r2 + 0x000] // CC_SCRATCH[0]
mov $r15 #chipsets - 8
init_find_chipset:
add b32 $r15 8
ld b32 $r3 D[$r15 + 0x00]
cmpu b32 $r3 $r2
bra e #init_context
cmpu b32 $r3 0
bra ne #init_find_chipset
// unknown chipset
ret
// context size calculation, reserve first 256 bytes for use by fuc
init_context:
mov $r1 256
// calculate size of mmio context data
ld b16 $r14 D[$r15 + 4]
ld b16 $r15 D[$r15 + 6]
sethi $r14 0
st b32 D[$r0 + #hub_mmio_list_head] $r14
st b32 D[$r0 + #hub_mmio_list_tail] $r15
call #mmctx_size
// set mmctx base addresses now so we don't have to do it later,
// they don't (currently) ever change
mov $r3 0x700
shl b32 $r3 6
shr b32 $r4 $r1 8
iowr I[$r3 + 0x000] $r4 // MMCTX_SAVE_SWBASE
iowr I[$r3 + 0x100] $r4 // MMCTX_LOAD_SWBASE
add b32 $r3 0x1300
add b32 $r1 $r15
shr b32 $r15 2
iowr I[$r3 + 0x000] $r15 // MMCTX_LOAD_COUNT, wtf for?!?
// strands, base offset needs to be aligned to 256 bytes
shr b32 $r1 8
add b32 $r1 1
shl b32 $r1 8
mov b32 $r15 $r1
call #strand_ctx_init
add b32 $r1 $r15
// initialise each GPC in sequence by passing in the offset of its
// context data in GPCn_CC_SCRATCH[1], and starting its FUC (which
// has previously been uploaded by the host) running.
//
// the GPC fuc init sequence will set GPCn_CC_SCRATCH[0] bit 31
// when it has completed, and return the size of its context data
// in GPCn_CC_SCRATCH[1]
//
ld b32 $r3 D[$r0 + #gpc_count]
mov $r4 0x2000
sethi $r4 0x500000
init_gpc:
// setup, and start GPC ucode running
add b32 $r14 $r4 0x804
mov b32 $r15 $r1
call #nv_wr32 // CC_SCRATCH[1] = ctx offset
add b32 $r14 $r4 0x800
mov b32 $r15 $r2
call #nv_wr32 // CC_SCRATCH[0] = chipset
add b32 $r14 $r4 0x10c
clear b32 $r15
call #nv_wr32
add b32 $r14 $r4 0x104
call #nv_wr32 // ENTRY
add b32 $r14 $r4 0x100
mov $r15 2 // CTRL_START_TRIGGER
call #nv_wr32 // CTRL
// wait for it to complete, and adjust context size
add b32 $r14 $r4 0x800
init_gpc_wait:
call #nv_rd32
xbit $r15 $r15 31
bra e #init_gpc_wait
add b32 $r14 $r4 0x804
call #nv_rd32
add b32 $r1 $r15
// next!
add b32 $r4 0x8000
sub b32 $r3 1
bra ne #init_gpc
// save context size, and tell host we're ready
mov $r2 0x800
shl b32 $r2 6
iowr I[$r2 + 0x100] $r1 // CC_SCRATCH[1] = context size
add b32 $r2 0x800
clear b32 $r1
bset $r1 31
iowr I[$r2 + 0x000] $r1 // CC_SCRATCH[0] |= 0x80000000
// Main program loop, very simple, sleeps until woken up by the interrupt
// handler, pulls a command from the queue and executes its handler
//
main:
// sleep until we have something to do
bset $flags $p0
sleep $p0
mov $r13 #cmd_queue
call #queue_get
bra $p1 #main
// context switch, requested by GPU?
cmpu b32 $r14 0x4001
bra ne #main_not_ctx_switch
trace_set(T_AUTO)
mov $r1 0xb00
shl b32 $r1 6
iord $r2 I[$r1 + 0x100] // CHAN_NEXT
iord $r1 I[$r1 + 0x000] // CHAN_CUR
xbit $r3 $r1 31
bra e #chsw_no_prev
xbit $r3 $r2 31
bra e #chsw_prev_no_next
push $r2
mov b32 $r2 $r1
trace_set(T_SAVE)
bclr $flags $p1
bset $flags $p2
call #ctx_xfer
trace_clr(T_SAVE);
pop $r2
trace_set(T_LOAD);
bset $flags $p1
call #ctx_xfer
trace_clr(T_LOAD);
bra #chsw_done
chsw_prev_no_next:
push $r2
mov b32 $r2 $r1
bclr $flags $p1
bclr $flags $p2
call #ctx_xfer
pop $r2
mov $r1 0xb00
shl b32 $r1 6
iowr I[$r1] $r2
bra #chsw_done
chsw_no_prev:
xbit $r3 $r2 31
bra e #chsw_done
bset $flags $p1
bclr $flags $p2
call #ctx_xfer
// ack the context switch request
chsw_done:
mov $r1 0xb0c
shl b32 $r1 6
mov $r2 1
iowr I[$r1 + 0x000] $r2 // 0x409b0c
trace_clr(T_AUTO)
bra #main
// request to set current channel? (*not* a context switch)
main_not_ctx_switch:
cmpu b32 $r14 0x0001
bra ne #main_not_ctx_chan
mov b32 $r2 $r15
call #ctx_chan
bra #main_done
// request to store current channel context?
main_not_ctx_chan:
cmpu b32 $r14 0x0002
bra ne #main_not_ctx_save
trace_set(T_SAVE)
bclr $flags $p1
bclr $flags $p2
call #ctx_xfer
trace_clr(T_SAVE)
bra #main_done
main_not_ctx_save:
shl b32 $r15 $r14 16
or $r15 E_BAD_COMMAND
call #error
bra #main
main_done:
mov $r1 0x820
shl b32 $r1 6
clear b32 $r2
bset $r2 31
iowr I[$r1 + 0x000] $r2 // CC_SCRATCH[0] |= 0x80000000
bra #main
// interrupt handler
ih:
push $r8
mov $r8 $flags
push $r8
push $r9
push $r10
push $r11
push $r13
push $r14
push $r15
// incoming fifo command?
iord $r10 I[$r0 + 0x200] // INTR
and $r11 $r10 0x00000004
bra e #ih_no_fifo
// queue incoming fifo command for later processing
mov $r11 0x1900
mov $r13 #cmd_queue
iord $r14 I[$r11 + 0x100] // FIFO_CMD
iord $r15 I[$r11 + 0x000] // FIFO_DATA
call #queue_put
add b32 $r11 0x400
mov $r14 1
iowr I[$r11 + 0x000] $r14 // FIFO_ACK
// context switch request?
ih_no_fifo:
and $r11 $r10 0x00000100
bra e #ih_no_ctxsw
// enqueue a context switch for later processing
mov $r13 #cmd_queue
mov $r14 0x4001
call #queue_put
// anything we didn't handle, bring it to the host's attention
ih_no_ctxsw:
mov $r11 0x104
not b32 $r11
and $r11 $r10 $r11
bra e #ih_no_other
mov $r10 0xc1c
shl b32 $r10 6
iowr I[$r10] $r11 // INTR_UP_SET
// ack, and wake up main()
ih_no_other:
iowr I[$r0 + 0x100] $r10 // INTR_ACK
pop $r15
pop $r14
pop $r13
pop $r11
pop $r10
pop $r9
pop $r8
mov $flags $r8
pop $r8
bclr $flags $p0
iret
// Not real sure, but, MEM_CMD 7 will hang forever if this isn't done
ctx_4160s:
mov $r14 0x4160
sethi $r14 0x400000
mov $r15 1
call #nv_wr32
ctx_4160s_wait:
call #nv_rd32
xbit $r15 $r15 4
bra e #ctx_4160s_wait
ret
// Without clearing again at end of xfer, some things cause PGRAPH
// to hang with STATUS=0x00000007 until it's cleared.. fbcon can
// still function with it set however...
ctx_4160c:
mov $r14 0x4160
sethi $r14 0x400000
clear b32 $r15
call #nv_wr32
ret
// Again, not real sure
//
// In: $r15 value to set 0x404170 to
//
ctx_4170s:
mov $r14 0x4170
sethi $r14 0x400000
or $r15 0x10
call #nv_wr32
ret
// Waits for a ctx_4170s() call to complete
//
ctx_4170w:
mov $r14 0x4170
sethi $r14 0x400000
call #nv_rd32
and $r15 0x10
bra ne #ctx_4170w
ret
// Disables various things, waits a bit, and re-enables them..
//
// Not sure how exactly this helps, perhaps "ENABLE" is not such a
// good description for the bits we turn off? Anyways, without this,
// funny things happen.
//
ctx_redswitch:
mov $r14 0x614
shl b32 $r14 6
mov $r15 0x270
iowr I[$r14] $r15 // HUB_RED_SWITCH = ENABLE_GPC, POWER_ALL
mov $r15 8
ctx_redswitch_delay:
sub b32 $r15 1
bra ne #ctx_redswitch_delay
mov $r15 0x770
iowr I[$r14] $r15 // HUB_RED_SWITCH = ENABLE_ALL, POWER_ALL
ret
// Not a clue what this is for, except that unless the value is 0x10, the
// strand context is saved (and presumably restored) incorrectly..
//
// In: $r15 value to set to (0x00/0x10 are used)
//
ctx_86c:
mov $r14 0x86c
shl b32 $r14 6
iowr I[$r14] $r15 // HUB(0x86c) = val
mov $r14 -0x75ec
sethi $r14 0x400000
call #nv_wr32 // ROP(0xa14) = val
mov $r14 -0x5794
sethi $r14 0x410000
call #nv_wr32 // GPC(0x86c) = val
ret
// ctx_load - load's a channel's ctxctl data, and selects its vm
//
// In: $r2 channel address
//
ctx_load:
trace_set(T_CHAN)
// switch to channel, somewhat magic in parts..
mov $r10 12 // DONE_UNK12
call #wait_donez
mov $r1 0xa24
shl b32 $r1 6
iowr I[$r1 + 0x000] $r0 // 0x409a24
mov $r3 0xb00
shl b32 $r3 6
iowr I[$r3 + 0x100] $r2 // CHAN_NEXT
mov $r1 0xa0c
shl b32 $r1 6
mov $r4 7
iowr I[$r1 + 0x000] $r2 // MEM_CHAN
iowr I[$r1 + 0x100] $r4 // MEM_CMD
ctx_chan_wait_0:
iord $r4 I[$r1 + 0x100]
and $r4 0x1f
bra ne #ctx_chan_wait_0
iowr I[$r3 + 0x000] $r2 // CHAN_CUR
// load channel header, fetch PGRAPH context pointer
mov $xtargets $r0
bclr $r2 31
shl b32 $r2 4
add b32 $r2 2
trace_set(T_LCHAN)
mov $r1 0xa04
shl b32 $r1 6
iowr I[$r1 + 0x000] $r2 // MEM_BASE
mov $r1 0xa20
shl b32 $r1 6
mov $r2 0x0002
sethi $r2 0x80000000
iowr I[$r1 + 0x000] $r2 // MEM_TARGET = vram
mov $r1 0x10 // chan + 0x0210
mov $r2 #xfer_data
sethi $r2 0x00020000 // 16 bytes
xdld $r1 $r2
xdwait
trace_clr(T_LCHAN)
// update current context
ld b32 $r1 D[$r0 + #xfer_data + 4]
shl b32 $r1 24
ld b32 $r2 D[$r0 + #xfer_data + 0]
shr b32 $r2 8
or $r1 $r2
st b32 D[$r0 + #ctx_current] $r1
// set transfer base to start of context, and fetch context header
trace_set(T_LCTXH)
mov $r2 0xa04
shl b32 $r2 6
iowr I[$r2 + 0x000] $r1 // MEM_BASE
mov $r2 1
mov $r1 0xa20
shl b32 $r1 6
iowr I[$r1 + 0x000] $r2 // MEM_TARGET = vm
mov $r1 #chan_data
sethi $r1 0x00060000 // 256 bytes
xdld $r0 $r1
xdwait
trace_clr(T_LCTXH)
trace_clr(T_CHAN)
ret
// ctx_chan - handler for HUB_SET_CHAN command, will set a channel as
// the active channel for ctxctl, but not actually transfer
// any context data. intended for use only during initial
// context construction.
//
// In: $r2 channel address
//
ctx_chan:
call #ctx_4160s
call #ctx_load
mov $r10 12 // DONE_UNK12
call #wait_donez
mov $r1 0xa10
shl b32 $r1 6
mov $r2 5
iowr I[$r1 + 0x000] $r2 // MEM_CMD = 5 (???)
ctx_chan_wait:
iord $r2 I[$r1 + 0x000]
or $r2 $r2
bra ne #ctx_chan_wait
call #ctx_4160c
ret
// Execute per-context state overrides list
//
// Only executed on the first load of a channel. Might want to look into
// removing this and having the host directly modify the channel's context
// to change this state... The nouveau DRM already builds this list as
// it's definitely needed for NVIDIA's, so we may as well use it for now
//
// Input: $r1 mmio list length
//
ctx_mmio_exec:
// set transfer base to be the mmio list
ld b32 $r3 D[$r0 + #chan_mmio_address]
mov $r2 0xa04
shl b32 $r2 6
iowr I[$r2 + 0x000] $r3 // MEM_BASE
clear b32 $r3
ctx_mmio_loop:
// fetch next 256 bytes of mmio list if necessary
and $r4 $r3 0xff
bra ne #ctx_mmio_pull
mov $r5 #xfer_data
sethi $r5 0x00060000 // 256 bytes
xdld $r3 $r5
xdwait
// execute a single list entry
ctx_mmio_pull:
ld b32 $r14 D[$r4 + #xfer_data + 0x00]
ld b32 $r15 D[$r4 + #xfer_data + 0x04]
call #nv_wr32
// next!
add b32 $r3 8
sub b32 $r1 1
bra ne #ctx_mmio_loop
// set transfer base back to the current context
ctx_mmio_done:
ld b32 $r3 D[$r0 + #ctx_current]
iowr I[$r2 + 0x000] $r3 // MEM_BASE
// disable the mmio list now, we don't need/want to execute it again
st b32 D[$r0 + #chan_mmio_count] $r0
mov $r1 #chan_data
sethi $r1 0x00060000 // 256 bytes
xdst $r0 $r1
xdwait
ret
// Transfer HUB context data between GPU and storage area
//
// In: $r2 channel address
// $p1 clear on save, set on load
// $p2 set if opposite direction done/will be done, so:
// on save it means: "a load will follow this save"
// on load it means: "a save preceeded this load"
//
ctx_xfer:
// according to mwk, some kind of wait for idle
mov $r15 0xc00
shl b32 $r15 6
mov $r14 4
iowr I[$r15 + 0x200] $r14
ctx_xfer_idle:
iord $r14 I[$r15 + 0x000]
and $r14 0x2000
bra ne #ctx_xfer_idle
bra not $p1 #ctx_xfer_pre
bra $p2 #ctx_xfer_pre_load
ctx_xfer_pre:
mov $r15 0x10
call #ctx_86c
call #ctx_4160s
bra not $p1 #ctx_xfer_exec
ctx_xfer_pre_load:
mov $r15 2
call #ctx_4170s
call #ctx_4170w
call #ctx_redswitch
clear b32 $r15
call #ctx_4170s
call #ctx_load
// fetch context pointer, and initiate xfer on all GPCs
ctx_xfer_exec:
ld b32 $r1 D[$r0 + #ctx_current]
mov $r2 0x414
shl b32 $r2 6
iowr I[$r2 + 0x000] $r0 // BAR_STATUS = reset
mov $r14 -0x5b00
sethi $r14 0x410000
mov b32 $r15 $r1
call #nv_wr32 // GPC_BCAST_WRCMD_DATA = ctx pointer
add b32 $r14 4
xbit $r15 $flags $p1
xbit $r2 $flags $p2
shl b32 $r2 1
or $r15 $r2
call #nv_wr32 // GPC_BCAST_WRCMD_CMD = GPC_XFER(type)
// strands
mov $r1 0x4afc
sethi $r1 0x20000
mov $r2 0xc
iowr I[$r1] $r2 // STRAND_CMD(0x3f) = 0x0c
call #strand_wait
mov $r2 0x47fc
sethi $r2 0x20000
iowr I[$r2] $r0 // STRAND_FIRST_GENE(0x3f) = 0x00
xbit $r2 $flags $p1
add b32 $r2 3
iowr I[$r1] $r2 // STRAND_CMD(0x3f) = 0x03/0x04 (SAVE/LOAD)
// mmio context
xbit $r10 $flags $p1 // direction
or $r10 6 // first, last
mov $r11 0 // base = 0
ld b32 $r12 D[$r0 + #hub_mmio_list_head]
ld b32 $r13 D[$r0 + #hub_mmio_list_tail]
mov $r14 0 // not multi
call #mmctx_xfer
// wait for GPCs to all complete
mov $r10 8 // DONE_BAR
call #wait_doneo
// wait for strand xfer to complete
call #strand_wait
// post-op
bra $p1 #ctx_xfer_post
mov $r10 12 // DONE_UNK12
call #wait_donez
mov $r1 0xa10
shl b32 $r1 6
mov $r2 5
iowr I[$r1] $r2 // MEM_CMD
ctx_xfer_post_save_wait:
iord $r2 I[$r1]
or $r2 $r2
bra ne #ctx_xfer_post_save_wait
bra $p2 #ctx_xfer_done
ctx_xfer_post:
mov $r15 2
call #ctx_4170s
clear b32 $r15
call #ctx_86c
call #strand_post
call #ctx_4170w
clear b32 $r15
call #ctx_4170s
bra not $p1 #ctx_xfer_no_post_mmio
ld b32 $r1 D[$r0 + #chan_mmio_count]
or $r1 $r1
bra e #ctx_xfer_no_post_mmio
call #ctx_mmio_exec
ctx_xfer_no_post_mmio:
call #ctx_4160c
ctx_xfer_done:
ret
.align 256 .align 256
#undef INCLUDE_CODE
drivers/gpu/drm/nouveau/core/engine/graph/fuc/hubnvc0.fuc.h
浏览文件 @ e99716f1
...@@ -338,7 +338,7 @@ uint32_t nvc0_grhub_code[] = { ...@@ -338,7 +338,7 @@ uint32_t nvc0_grhub_code[] = {
0x0089d000, 0x0089d000,
0x081887f1, 0x081887f1,
0xd00684b6, 0xd00684b6,
/* 0x00e2: wait_done_wait_donez */ /* 0x00e2: wait_donez_ne */
0x87f1008a, 0x87f1008a,
0x84b60400, 0x84b60400,
0x0088cf06, 0x0088cf06,
...@@ -355,7 +355,7 @@ uint32_t nvc0_grhub_code[] = { ...@@ -355,7 +355,7 @@ uint32_t nvc0_grhub_code[] = {
0x87f10089, 0x87f10089,
0x84b60818, 0x84b60818,
0x008ad006, 0x008ad006,
/* 0x011c: wait_done_wait_doneo */ /* 0x011c: wait_doneo_e */
0x040087f1, 0x040087f1,
0xcf0684b6, 0xcf0684b6,
0x8aff0088, 0x8aff0088,
......
drivers/gpu/drm/nouveau/core/engine/graph/fuc/hubnve0.fuc
浏览文件 @ e99716f1
/* fuc microcode for nve0 PGRAPH/HUB /*
* * Copyright 2013 Red Hat Inc.
* Copyright 2011 Red Hat Inc.
* *
* Permission is hereby granted, free of charge, to any person obtaining a * Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"), * copy of this software and associated documentation files (the "Software"),
...@@ -20,32 +19,17 @@ ...@@ -20,32 +19,17 @@
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE. * OTHER DEALINGS IN THE SOFTWARE.
* *
* Authors: Ben Skeggs * Authors: Ben Skeggs <bskeggs@redhat.com>
*/ */
/* To build: #define NVGK
* m4 nve0_grhub.fuc | envyas -a -w -m fuc -V nva3 -o nve0_grhub.fuc.h #include "macros.fuc"
*/
.section #nve0_grhub_data .section #nve0_grhub_data
include(`nve0.fuc') #define INCLUDE_DATA
gpc_count: .b32 0 #include "com.fuc"
rop_count: .b32 0 #include "hub.fuc"
cmd_queue: queue_init
hub_mmio_list_head: .b32 0
hub_mmio_list_tail: .b32 0
ctx_current: .b32 0
.align 256
chan_data:
chan_mmio_count: .b32 0
chan_mmio_address: .b32 0
.align 256
xfer_data: .b32 0
.align 256
chipsets: chipsets:
.b8 0xe4 0 0 0 .b8 0xe4 0 0 0
.b16 #nve4_hub_mmio_head .b16 #nve4_hub_mmio_head
...@@ -170,684 +154,12 @@ mmctx_data(0x408840, 1) ...@@ -170,684 +154,12 @@ mmctx_data(0x408840, 1)
mmctx_data(0x408900, 3) mmctx_data(0x408900, 3)
mmctx_data(0x408980, 1) mmctx_data(0x408980, 1)
nvf0_hub_mmio_tail: nvf0_hub_mmio_tail:
#undef INCLUDE_DATA
.section #nve0_grhub_code .section #nve0_grhub_code
#define INCLUDE_CODE
bra #init bra #init
define(`include_code') #include "com.fuc"
include(`nve0.fuc') #include "hub.fuc"
// reports an exception to the host
//
// In: $r15 error code (see nve0.fuc)
//
error:
push $r14
mov $r14 0x814
shl b32 $r14 6
iowr I[$r14 + 0x000] $r15 // CC_SCRATCH[5] = error code
mov $r14 0xc1c
shl b32 $r14 6
mov $r15 1
iowr I[$r14 + 0x000] $r15 // INTR_UP_SET
pop $r14
ret
// HUB fuc initialisation, executed by triggering ucode start, will
// fall through to main loop after completion.
//
// Input:
// CC_SCRATCH[0]: chipset (PMC_BOOT_0 read returns 0x0bad0bad... sigh)
//
// Output:
// CC_SCRATCH[0]:
// 31:31: set to signal completion
// CC_SCRATCH[1]:
// 31:0: total PGRAPH context size
//
init:
clear b32 $r0
mov $sp $r0
mov $xdbase $r0
// enable fifo access
mov $r1 0x1200
mov $r2 2
iowr I[$r1 + 0x000] $r2 // FIFO_ENABLE
// setup i0 handler, and route all interrupts to it
mov $r1 #ih
mov $iv0 $r1
mov $r1 0x400
iowr I[$r1 + 0x300] $r0 // INTR_DISPATCH
// route HUB_CHANNEL_SWITCH to fuc interrupt 8
mov $r3 0x404
shl b32 $r3 6
mov $r2 0x2003 // { HUB_CHANNEL_SWITCH, ZERO } -> intr 8
iowr I[$r3 + 0x000] $r2
// not sure what these are, route them because NVIDIA does, and
// the IRQ handler will signal the host if we ever get one.. we
// may find out if/why we need to handle these if so..
//
mov $r2 0x2004
iowr I[$r3 + 0x004] $r2 // { 0x04, ZERO } -> intr 9
mov $r2 0x200b
iowr I[$r3 + 0x008] $r2 // { 0x0b, ZERO } -> intr 10
mov $r2 0x200c
iowr I[$r3 + 0x01c] $r2 // { 0x0c, ZERO } -> intr 15
// enable all INTR_UP interrupts
mov $r2 0xc24
shl b32 $r2 6
not b32 $r3 $r0
iowr I[$r2] $r3
// enable fifo, ctxsw, 9, 10, 15 interrupts
mov $r2 -0x78fc // 0x8704
sethi $r2 0
iowr I[$r1 + 0x000] $r2 // INTR_EN_SET
// fifo level triggered, rest edge
sub b32 $r1 0x100
mov $r2 4
iowr I[$r1] $r2
// enable interrupts
bset $flags ie0
// fetch enabled GPC/ROP counts
mov $r14 -0x69fc // 0x409604
sethi $r14 0x400000
call #nv_rd32
extr $r1 $r15 16:20
st b32 D[$r0 + #rop_count] $r1
and $r15 0x1f
st b32 D[$r0 + #gpc_count] $r15
// set BAR_REQMASK to GPC mask
mov $r1 1
shl b32 $r1 $r15
sub b32 $r1 1
mov $r2 0x40c
shl b32 $r2 6
iowr I[$r2 + 0x000] $r1
iowr I[$r2 + 0x100] $r1
// find context data for this chipset
mov $r2 0x800
shl b32 $r2 6
iord $r2 I[$r2 + 0x000] // CC_SCRATCH[0]
mov $r15 #chipsets - 8
init_find_chipset:
add b32 $r15 8
ld b32 $r3 D[$r15 + 0x00]
cmpu b32 $r3 $r2
bra e #init_context
cmpu b32 $r3 0
bra ne #init_find_chipset
// unknown chipset
ret
// context size calculation, reserve first 256 bytes for use by fuc
init_context:
mov $r1 256
// calculate size of mmio context data
ld b16 $r14 D[$r15 + 4]
ld b16 $r15 D[$r15 + 6]
sethi $r14 0
st b32 D[$r0 + #hub_mmio_list_head] $r14
st b32 D[$r0 + #hub_mmio_list_tail] $r15
call #mmctx_size
// set mmctx base addresses now so we don't have to do it later,
// they don't (currently) ever change
mov $r3 0x700
shl b32 $r3 6
shr b32 $r4 $r1 8
iowr I[$r3 + 0x000] $r4 // MMCTX_SAVE_SWBASE
iowr I[$r3 + 0x100] $r4 // MMCTX_LOAD_SWBASE
add b32 $r3 0x1300
add b32 $r1 $r15
shr b32 $r15 2
iowr I[$r3 + 0x000] $r15 // MMCTX_LOAD_COUNT, wtf for?!?
// strands, base offset needs to be aligned to 256 bytes
shr b32 $r1 8
add b32 $r1 1
shl b32 $r1 8
mov b32 $r15 $r1
call #strand_ctx_init
add b32 $r1 $r15
// initialise each GPC in sequence by passing in the offset of its
// context data in GPCn_CC_SCRATCH[1], and starting its FUC (which
// has previously been uploaded by the host) running.
//
// the GPC fuc init sequence will set GPCn_CC_SCRATCH[0] bit 31
// when it has completed, and return the size of its context data
// in GPCn_CC_SCRATCH[1]
//
ld b32 $r3 D[$r0 + #gpc_count]
mov $r4 0x2000
sethi $r4 0x500000
init_gpc:
// setup, and start GPC ucode running
add b32 $r14 $r4 0x804
mov b32 $r15 $r1
call #nv_wr32 // CC_SCRATCH[1] = ctx offset
add b32 $r14 $r4 0x800
mov b32 $r15 $r2
call #nv_wr32 // CC_SCRATCH[0] = chipset
add b32 $r14 $r4 0x10c
clear b32 $r15
call #nv_wr32
add b32 $r14 $r4 0x104
call #nv_wr32 // ENTRY
add b32 $r14 $r4 0x100
mov $r15 2 // CTRL_START_TRIGGER
call #nv_wr32 // CTRL
// wait for it to complete, and adjust context size
add b32 $r14 $r4 0x800
init_gpc_wait:
call #nv_rd32
xbit $r15 $r15 31
bra e #init_gpc_wait
add b32 $r14 $r4 0x804
call #nv_rd32
add b32 $r1 $r15
// next!
add b32 $r4 0x8000
sub b32 $r3 1
bra ne #init_gpc
// save context size, and tell host we're ready
mov $r2 0x800
shl b32 $r2 6
iowr I[$r2 + 0x100] $r1 // CC_SCRATCH[1] = context size
add b32 $r2 0x800
clear b32 $r1
bset $r1 31
iowr I[$r2 + 0x000] $r1 // CC_SCRATCH[0] |= 0x80000000
// Main program loop, very simple, sleeps until woken up by the interrupt
// handler, pulls a command from the queue and executes its handler
//
main:
// sleep until we have something to do
bset $flags $p0
sleep $p0
mov $r13 #cmd_queue
call #queue_get
bra $p1 #main
// context switch, requested by GPU?
cmpu b32 $r14 0x4001
bra ne #main_not_ctx_switch
trace_set(T_AUTO)
mov $r1 0xb00
shl b32 $r1 6
iord $r2 I[$r1 + 0x100] // CHAN_NEXT
iord $r1 I[$r1 + 0x000] // CHAN_CUR
xbit $r3 $r1 31
bra e #chsw_no_prev
xbit $r3 $r2 31
bra e #chsw_prev_no_next
push $r2
mov b32 $r2 $r1
trace_set(T_SAVE)
bclr $flags $p1
bset $flags $p2
call #ctx_xfer
trace_clr(T_SAVE);
pop $r2
trace_set(T_LOAD);
bset $flags $p1
call #ctx_xfer
trace_clr(T_LOAD);
bra #chsw_done
chsw_prev_no_next:
push $r2
mov b32 $r2 $r1
bclr $flags $p1
bclr $flags $p2
call #ctx_xfer
pop $r2
mov $r1 0xb00
shl b32 $r1 6
iowr I[$r1] $r2
bra #chsw_done
chsw_no_prev:
xbit $r3 $r2 31
bra e #chsw_done
bset $flags $p1
bclr $flags $p2
call #ctx_xfer
// ack the context switch request
chsw_done:
mov $r1 0xb0c
shl b32 $r1 6
mov $r2 1
iowr I[$r1 + 0x000] $r2 // 0x409b0c
trace_clr(T_AUTO)
bra #main
// request to set current channel? (*not* a context switch)
main_not_ctx_switch:
cmpu b32 $r14 0x0001
bra ne #main_not_ctx_chan
mov b32 $r2 $r15
call #ctx_chan
bra #main_done
// request to store current channel context?
main_not_ctx_chan:
cmpu b32 $r14 0x0002
bra ne #main_not_ctx_save
trace_set(T_SAVE)
bclr $flags $p1
bclr $flags $p2
call #ctx_xfer
trace_clr(T_SAVE)
bra #main_done
main_not_ctx_save:
shl b32 $r15 $r14 16
or $r15 E_BAD_COMMAND
call #error
bra #main
main_done:
mov $r1 0x820
shl b32 $r1 6
clear b32 $r2
bset $r2 31
iowr I[$r1 + 0x000] $r2 // CC_SCRATCH[0] |= 0x80000000
bra #main
// interrupt handler
ih:
push $r8
mov $r8 $flags
push $r8
push $r9
push $r10
push $r11
push $r13
push $r14
push $r15
// incoming fifo command?
iord $r10 I[$r0 + 0x200] // INTR
and $r11 $r10 0x00000004
bra e #ih_no_fifo
// queue incoming fifo command for later processing
mov $r11 0x1900
mov $r13 #cmd_queue
iord $r14 I[$r11 + 0x100] // FIFO_CMD
iord $r15 I[$r11 + 0x000] // FIFO_DATA
call #queue_put
add b32 $r11 0x400
mov $r14 1
iowr I[$r11 + 0x000] $r14 // FIFO_ACK
// context switch request?
ih_no_fifo:
and $r11 $r10 0x00000100
bra e #ih_no_ctxsw
// enqueue a context switch for later processing
mov $r13 #cmd_queue
mov $r14 0x4001
call #queue_put
// anything we didn't handle, bring it to the host's attention
ih_no_ctxsw:
mov $r11 0x104
not b32 $r11
and $r11 $r10 $r11
bra e #ih_no_other
mov $r10 0xc1c
shl b32 $r10 6
iowr I[$r10] $r11 // INTR_UP_SET
// ack, and wake up main()
ih_no_other:
iowr I[$r0 + 0x100] $r10 // INTR_ACK
pop $r15
pop $r14
pop $r13
pop $r11
pop $r10
pop $r9
pop $r8
mov $flags $r8
pop $r8
bclr $flags $p0
iret
// Again, not real sure
//
// In: $r15 value to set 0x404170 to
//
ctx_4170s:
mov $r14 0x4170
sethi $r14 0x400000
or $r15 0x10
call #nv_wr32
ret
// Waits for a ctx_4170s() call to complete
//
ctx_4170w:
mov $r14 0x4170
sethi $r14 0x400000
call #nv_rd32
and $r15 0x10
bra ne #ctx_4170w
ret
// Disables various things, waits a bit, and re-enables them..
//
// Not sure how exactly this helps, perhaps "ENABLE" is not such a
// good description for the bits we turn off? Anyways, without this,
// funny things happen.
//
ctx_redswitch:
mov $r14 0x614
shl b32 $r14 6
mov $r15 0x270
iowr I[$r14] $r15 // HUB_RED_SWITCH = ENABLE_GPC, POWER_ALL
mov $r15 8
ctx_redswitch_delay:
sub b32 $r15 1
bra ne #ctx_redswitch_delay
mov $r15 0x770
iowr I[$r14] $r15 // HUB_RED_SWITCH = ENABLE_ALL, POWER_ALL
ret
// Not a clue what this is for, except that unless the value is 0x10, the
// strand context is saved (and presumably restored) incorrectly..
//
// In: $r15 value to set to (0x00/0x10 are used)
//
ctx_86c:
mov $r14 0x86c
shl b32 $r14 6
iowr I[$r14] $r15 // HUB(0x86c) = val
mov $r14 -0x75ec
sethi $r14 0x400000
call #nv_wr32 // ROP(0xa14) = val
mov $r14 -0x5794
sethi $r14 0x410000
call #nv_wr32 // GPC(0x86c) = val
ret
// ctx_load - load's a channel's ctxctl data, and selects its vm
//
// In: $r2 channel address
//
ctx_load:
trace_set(T_CHAN)
// switch to channel, somewhat magic in parts..
mov $r10 12 // DONE_UNK12
call #wait_donez
mov $r1 0xa24
shl b32 $r1 6
iowr I[$r1 + 0x000] $r0 // 0x409a24
mov $r3 0xb00
shl b32 $r3 6
iowr I[$r3 + 0x100] $r2 // CHAN_NEXT
mov $r1 0xa0c
shl b32 $r1 6
mov $r4 7
iowr I[$r1 + 0x000] $r2 // MEM_CHAN
iowr I[$r1 + 0x100] $r4 // MEM_CMD
ctx_chan_wait_0:
iord $r4 I[$r1 + 0x100]
and $r4 0x1f
bra ne #ctx_chan_wait_0
iowr I[$r3 + 0x000] $r2 // CHAN_CUR
// load channel header, fetch PGRAPH context pointer
mov $xtargets $r0
bclr $r2 31
shl b32 $r2 4
add b32 $r2 2
trace_set(T_LCHAN)
mov $r1 0xa04
shl b32 $r1 6
iowr I[$r1 + 0x000] $r2 // MEM_BASE
mov $r1 0xa20
shl b32 $r1 6
mov $r2 0x0002
sethi $r2 0x80000000
iowr I[$r1 + 0x000] $r2 // MEM_TARGET = vram
mov $r1 0x10 // chan + 0x0210
mov $r2 #xfer_data
sethi $r2 0x00020000 // 16 bytes
xdld $r1 $r2
xdwait
trace_clr(T_LCHAN)
// update current context
ld b32 $r1 D[$r0 + #xfer_data + 4]
shl b32 $r1 24
ld b32 $r2 D[$r0 + #xfer_data + 0]
shr b32 $r2 8
or $r1 $r2
st b32 D[$r0 + #ctx_current] $r1
// set transfer base to start of context, and fetch context header
trace_set(T_LCTXH)
mov $r2 0xa04
shl b32 $r2 6
iowr I[$r2 + 0x000] $r1 // MEM_BASE
mov $r2 1
mov $r1 0xa20
shl b32 $r1 6
iowr I[$r1 + 0x000] $r2 // MEM_TARGET = vm
mov $r1 #chan_data
sethi $r1 0x00060000 // 256 bytes
xdld $r0 $r1
xdwait
trace_clr(T_LCTXH)
trace_clr(T_CHAN)
ret
// ctx_chan - handler for HUB_SET_CHAN command, will set a channel as
// the active channel for ctxctl, but not actually transfer
// any context data. intended for use only during initial
// context construction.
//
// In: $r2 channel address
//
ctx_chan:
call #ctx_load
mov $r10 12 // DONE_UNK12
call #wait_donez
mov $r1 0xa10
shl b32 $r1 6
mov $r2 5
iowr I[$r1 + 0x000] $r2 // MEM_CMD = 5 (???)
ctx_chan_wait:
iord $r2 I[$r1 + 0x000]
or $r2 $r2
bra ne #ctx_chan_wait
ret
// Execute per-context state overrides list
//
// Only executed on the first load of a channel. Might want to look into
// removing this and having the host directly modify the channel's context
// to change this state... The nouveau DRM already builds this list as
// it's definitely needed for NVIDIA's, so we may as well use it for now
//
// Input: $r1 mmio list length
//
ctx_mmio_exec:
// set transfer base to be the mmio list
ld b32 $r3 D[$r0 + #chan_mmio_address]
mov $r2 0xa04
shl b32 $r2 6
iowr I[$r2 + 0x000] $r3 // MEM_BASE
clear b32 $r3
ctx_mmio_loop:
// fetch next 256 bytes of mmio list if necessary
and $r4 $r3 0xff
bra ne #ctx_mmio_pull
mov $r5 #xfer_data
sethi $r5 0x00060000 // 256 bytes
xdld $r3 $r5
xdwait
// execute a single list entry
ctx_mmio_pull:
ld b32 $r14 D[$r4 + #xfer_data + 0x00]
ld b32 $r15 D[$r4 + #xfer_data + 0x04]
call #nv_wr32
// next!
add b32 $r3 8
sub b32 $r1 1
bra ne #ctx_mmio_loop
// set transfer base back to the current context
ctx_mmio_done:
ld b32 $r3 D[$r0 + #ctx_current]
iowr I[$r2 + 0x000] $r3 // MEM_BASE
// disable the mmio list now, we don't need/want to execute it again
st b32 D[$r0 + #chan_mmio_count] $r0
mov $r1 #chan_data
sethi $r1 0x00060000 // 256 bytes
xdst $r0 $r1
xdwait
ret
// Transfer HUB context data between GPU and storage area
//
// In: $r2 channel address
// $p1 clear on save, set on load
// $p2 set if opposite direction done/will be done, so:
// on save it means: "a load will follow this save"
// on load it means: "a save preceeded this load"
//
ctx_xfer:
// according to mwk, some kind of wait for idle
mov $r15 0xc00
shl b32 $r15 6
mov $r14 4
iowr I[$r15 + 0x200] $r14
ctx_xfer_idle:
iord $r14 I[$r15 + 0x000]
and $r14 0x2000
bra ne #ctx_xfer_idle
bra not $p1 #ctx_xfer_pre
bra $p2 #ctx_xfer_pre_load
ctx_xfer_pre:
mov $r15 0x10
call #ctx_86c
bra not $p1 #ctx_xfer_exec
ctx_xfer_pre_load:
mov $r15 2
call #ctx_4170s
call #ctx_4170w
call #ctx_redswitch
clear b32 $r15
call #ctx_4170s
call #ctx_load
// fetch context pointer, and initiate xfer on all GPCs
ctx_xfer_exec:
ld b32 $r1 D[$r0 + #ctx_current]
mov $r2 0x414
shl b32 $r2 6
iowr I[$r2 + 0x000] $r0 // BAR_STATUS = reset
mov $r14 -0x5b00
sethi $r14 0x410000
mov b32 $r15 $r1
call #nv_wr32 // GPC_BCAST_WRCMD_DATA = ctx pointer
add b32 $r14 4
xbit $r15 $flags $p1
xbit $r2 $flags $p2
shl b32 $r2 1
or $r15 $r2
call #nv_wr32 // GPC_BCAST_WRCMD_CMD = GPC_XFER(type)
// strands
mov $r1 0x4afc
sethi $r1 0x20000
mov $r2 0xc
iowr I[$r1] $r2 // STRAND_CMD(0x3f) = 0x0c
call #strand_wait
mov $r2 0x47fc
sethi $r2 0x20000
iowr I[$r2] $r0 // STRAND_FIRST_GENE(0x3f) = 0x00
xbit $r2 $flags $p1
add b32 $r2 3
iowr I[$r1] $r2 // STRAND_CMD(0x3f) = 0x03/0x04 (SAVE/LOAD)
// mmio context
xbit $r10 $flags $p1 // direction
or $r10 6 // first, last
mov $r11 0 // base = 0
ld b32 $r12 D[$r0 + #hub_mmio_list_head]
ld b32 $r13 D[$r0 + #hub_mmio_list_tail]
mov $r14 0 // not multi
call #mmctx_xfer
// wait for GPCs to all complete
mov $r10 8 // DONE_BAR
call #wait_doneo
// wait for strand xfer to complete
call #strand_wait
// post-op
bra $p1 #ctx_xfer_post
mov $r10 12 // DONE_UNK12
call #wait_donez
mov $r1 0xa10
shl b32 $r1 6
mov $r2 5
iowr I[$r1] $r2 // MEM_CMD
ctx_xfer_post_save_wait:
iord $r2 I[$r1]
or $r2 $r2
bra ne #ctx_xfer_post_save_wait
bra $p2 #ctx_xfer_done
ctx_xfer_post:
mov $r15 2
call #ctx_4170s
clear b32 $r15
call #ctx_86c
call #strand_post
call #ctx_4170w
clear b32 $r15
call #ctx_4170s
bra not $p1 #ctx_xfer_no_post_mmio
ld b32 $r1 D[$r0 + #chan_mmio_count]
or $r1 $r1
bra e #ctx_xfer_no_post_mmio
call #ctx_mmio_exec
ctx_xfer_no_post_mmio:
ctx_xfer_done:
ret
.align 256 .align 256
#undef INCLUDE_CODE
drivers/gpu/drm/nouveau/core/engine/graph/fuc/hubnve0.fuc.h
浏览文件 @ e99716f1
...@@ -388,7 +388,7 @@ uint32_t nve0_grhub_code[] = { ...@@ -388,7 +388,7 @@ uint32_t nve0_grhub_code[] = {
0x0089d000, 0x0089d000,
0x081887f1, 0x081887f1,
0xd00684b6, 0xd00684b6,
/* 0x00e2: wait_done_wait_donez */ /* 0x00e2: wait_donez_ne */
0x87f1008a, 0x87f1008a,
0x84b60400, 0x84b60400,
0x0088cf06, 0x0088cf06,
...@@ -405,7 +405,7 @@ uint32_t nve0_grhub_code[] = { ...@@ -405,7 +405,7 @@ uint32_t nve0_grhub_code[] = {
0x87f10089, 0x87f10089,
0x84b60818, 0x84b60818,
0x008ad006, 0x008ad006,
/* 0x011c: wait_done_wait_doneo */ /* 0x011c: wait_doneo_e */
0x040087f1, 0x040087f1,
0xcf0684b6, 0xcf0684b6,
0x8aff0088, 0x8aff0088,
......
drivers/gpu/drm/nouveau/core/engine/graph/fuc/macros.fuc 0 → 100644
浏览文件 @ e99716f1
/*
* Copyright 2013 Red Hat Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors: Ben Skeggs <bskeggs@redhat.com>
*/
#include "os.h"
#define mmctx_data(r,c) .b32 (((c - 1) << 26) | r)
#define queue_init .skip 72 // (2 * 4) + ((8 * 4) * 2)
#define T_WAIT 0
#define T_MMCTX 1
#define T_STRWAIT 2
#define T_STRINIT 3
#define T_AUTO 4
#define T_CHAN 5
#define T_LOAD 6
#define T_SAVE 7
#define T_LCHAN 8
#define T_LCTXH 9
#define trace_set(bit) /*
*/ mov $r8 0x83c /*
*/ shl b32 $r8 6 /*
*/ clear b32 $r9 /*
*/ bset $r9 bit /*
*/ iowr I[$r8 + 0x000] $r9
#define trace_clr(bit) /*
*/ mov $r8 0x85c /*
*/ shl b32 $r8 6 /*
*/ clear b32 $r9 /*
*/ bset $r9 bit /*
*/ iowr I[$r8 + 0x000] $r9
drivers/gpu/drm/nouveau/core/engine/graph/fuc/nve0.fuc 已删除 100644 → 0
浏览文件 @ 05f9a5bc
/* fuc microcode util functions for nve0 PGRAPH
*
* Copyright 2011 Red Hat Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors: Ben Skeggs
*/
define(`mmctx_data', `.b32 eval((($2 - 1) << 26) | $1)')
define(`queue_init', `.skip eval((2 * 4) + ((8 * 4) * 2))')
ifdef(`include_code', `
// Error codes
define(`E_BAD_COMMAND', 0x01)
define(`E_CMD_OVERFLOW', 0x02)
// Util macros to help with debugging ucode hangs etc
define(`T_WAIT', 0)
define(`T_MMCTX', 1)
define(`T_STRWAIT', 2)
define(`T_STRINIT', 3)
define(`T_AUTO', 4)
define(`T_CHAN', 5)
define(`T_LOAD', 6)
define(`T_SAVE', 7)
define(`T_LCHAN', 8)
define(`T_LCTXH', 9)
define(`trace_set', `
mov $r8 0x83c
shl b32 $r8 6
clear b32 $r9
bset $r9 $1
iowr I[$r8 + 0x000] $r9 // CC_SCRATCH[7]
')
define(`trace_clr', `
mov $r8 0x85c
shl b32 $r8 6
clear b32 $r9
bset $r9 $1
iowr I[$r8 + 0x000] $r9 // CC_SCRATCH[7]
')
// queue_put - add request to queue
//
// In : $r13 queue pointer
// $r14 command
// $r15 data
//
queue_put:
// make sure we have space..
ld b32 $r8 D[$r13 + 0x0] // GET
ld b32 $r9 D[$r13 + 0x4] // PUT
xor $r8 8
cmpu b32 $r8 $r9
bra ne #queue_put_next
mov $r15 E_CMD_OVERFLOW
call #error
ret
// store cmd/data on queue
queue_put_next:
and $r8 $r9 7
shl b32 $r8 3
add b32 $r8 $r13
add b32 $r8 8
st b32 D[$r8 + 0x0] $r14
st b32 D[$r8 + 0x4] $r15
// update PUT
add b32 $r9 1
and $r9 0xf
st b32 D[$r13 + 0x4] $r9
ret
// queue_get - fetch request from queue
//
// In : $r13 queue pointer
//
// Out: $p1 clear on success (data available)
// $r14 command
// $r15 data
//
queue_get:
bset $flags $p1
ld b32 $r8 D[$r13 + 0x0] // GET
ld b32 $r9 D[$r13 + 0x4] // PUT
cmpu b32 $r8 $r9
bra e #queue_get_done
// fetch first cmd/data pair
and $r9 $r8 7
shl b32 $r9 3
add b32 $r9 $r13
add b32 $r9 8
ld b32 $r14 D[$r9 + 0x0]
ld b32 $r15 D[$r9 + 0x4]
// update GET
add b32 $r8 1
and $r8 0xf
st b32 D[$r13 + 0x0] $r8
bclr $flags $p1
queue_get_done:
ret
// nv_rd32 - read 32-bit value from nv register
//
// In : $r14 register
// Out: $r15 value
//
nv_rd32:
mov $r11 0x728
shl b32 $r11 6
mov b32 $r12 $r14
bset $r12 31 // MMIO_CTRL_PENDING
iowr I[$r11 + 0x000] $r12 // MMIO_CTRL
nv_rd32_wait:
iord $r12 I[$r11 + 0x000]
xbit $r12 $r12 31
bra ne #nv_rd32_wait
mov $r10 6 // DONE_MMIO_RD
call #wait_doneo
iord $r15 I[$r11 + 0x100] // MMIO_RDVAL
ret
// nv_wr32 - write 32-bit value to nv register
//
// In : $r14 register
// $r15 value
//
nv_wr32:
mov $r11 0x728
shl b32 $r11 6
iowr I[$r11 + 0x200] $r15 // MMIO_WRVAL
mov b32 $r12 $r14
bset $r12 31 // MMIO_CTRL_PENDING
bset $r12 30 // MMIO_CTRL_WRITE
iowr I[$r11 + 0x000] $r12 // MMIO_CTRL
nv_wr32_wait:
iord $r12 I[$r11 + 0x000]
xbit $r12 $r12 31
bra ne #nv_wr32_wait
ret
// (re)set watchdog timer
//
// In : $r15 timeout
//
watchdog_reset:
mov $r8 0x430
shl b32 $r8 6
bset $r15 31
iowr I[$r8 + 0x000] $r15
ret
// clear watchdog timer
watchdog_clear:
mov $r8 0x430
shl b32 $r8 6
iowr I[$r8 + 0x000] $r0
ret
// wait_done{z,o} - wait on FUC_DONE bit to become clear/set
//
// In : $r10 bit to wait on
//
define(`wait_done', `
$1:
trace_set(T_WAIT);
mov $r8 0x818
shl b32 $r8 6
iowr I[$r8 + 0x000] $r10 // CC_SCRATCH[6] = wait bit
wait_done_$1:
mov $r8 0x400
shl b32 $r8 6
iord $r8 I[$r8 + 0x000] // DONE
xbit $r8 $r8 $r10
bra $2 #wait_done_$1
trace_clr(T_WAIT)
ret
')
wait_done(wait_donez, ne)
wait_done(wait_doneo, e)
// mmctx_size - determine size of a mmio list transfer
//
// In : $r14 mmio list head
// $r15 mmio list tail
// Out: $r15 transfer size (in bytes)
//
mmctx_size:
clear b32 $r9
nv_mmctx_size_loop:
ld b32 $r8 D[$r14]
shr b32 $r8 26
add b32 $r8 1
shl b32 $r8 2
add b32 $r9 $r8
add b32 $r14 4
cmpu b32 $r14 $r15
bra ne #nv_mmctx_size_loop
mov b32 $r15 $r9
ret
// mmctx_xfer - execute a list of mmio transfers
//
// In : $r10 flags
// bit 0: direction (0 = save, 1 = load)
// bit 1: set if first transfer
// bit 2: set if last transfer
// $r11 base
// $r12 mmio list head
// $r13 mmio list tail
// $r14 multi_stride
// $r15 multi_mask
//
mmctx_xfer:
trace_set(T_MMCTX)
mov $r8 0x710
shl b32 $r8 6
clear b32 $r9
or $r11 $r11
bra e #mmctx_base_disabled
iowr I[$r8 + 0x000] $r11 // MMCTX_BASE
bset $r9 0 // BASE_EN
mmctx_base_disabled:
or $r14 $r14
bra e #mmctx_multi_disabled
iowr I[$r8 + 0x200] $r14 // MMCTX_MULTI_STRIDE
iowr I[$r8 + 0x300] $r15 // MMCTX_MULTI_MASK
bset $r9 1 // MULTI_EN
mmctx_multi_disabled:
add b32 $r8 0x100
xbit $r11 $r10 0
shl b32 $r11 16 // DIR
bset $r11 12 // QLIMIT = 0x10
xbit $r14 $r10 1
shl b32 $r14 17
or $r11 $r14 // START_TRIGGER
iowr I[$r8 + 0x000] $r11 // MMCTX_CTRL
// loop over the mmio list, and send requests to the hw
mmctx_exec_loop:
// wait for space in mmctx queue
mmctx_wait_free:
iord $r14 I[$r8 + 0x000] // MMCTX_CTRL
and $r14 0x1f
bra e #mmctx_wait_free
// queue up an entry
ld b32 $r14 D[$r12]
or $r14 $r9
iowr I[$r8 + 0x300] $r14
add b32 $r12 4
cmpu b32 $r12 $r13
bra ne #mmctx_exec_loop
xbit $r11 $r10 2
bra ne #mmctx_stop
// wait for queue to empty
mmctx_fini_wait:
iord $r11 I[$r8 + 0x000] // MMCTX_CTRL
and $r11 0x1f
cmpu b32 $r11 0x10
bra ne #mmctx_fini_wait
mov $r10 2 // DONE_MMCTX
call #wait_donez
bra #mmctx_done
mmctx_stop:
xbit $r11 $r10 0
shl b32 $r11 16 // DIR
bset $r11 12 // QLIMIT = 0x10
bset $r11 18 // STOP_TRIGGER
iowr I[$r8 + 0x000] $r11 // MMCTX_CTRL
mmctx_stop_wait:
// wait for STOP_TRIGGER to clear
iord $r11 I[$r8 + 0x000] // MMCTX_CTRL
xbit $r11 $r11 18
bra ne #mmctx_stop_wait
mmctx_done:
trace_clr(T_MMCTX)
ret
// Wait for DONE_STRAND
//
strand_wait:
push $r10
mov $r10 2
call #wait_donez
pop $r10
ret
// unknown - call before issuing strand commands
//
strand_pre:
mov $r8 0x4afc
sethi $r8 0x20000
mov $r9 0xc
iowr I[$r8] $r9
call #strand_wait
ret
// unknown - call after issuing strand commands
//
strand_post:
mov $r8 0x4afc
sethi $r8 0x20000
mov $r9 0xd
iowr I[$r8] $r9
call #strand_wait
ret
// Selects strand set?!
//
// In: $r14 id
//
strand_set:
mov $r10 0x4ffc
sethi $r10 0x20000
sub b32 $r11 $r10 0x500
mov $r12 0xf
iowr I[$r10 + 0x000] $r12 // 0x93c = 0xf
mov $r12 0xb
iowr I[$r11 + 0x000] $r12 // 0x928 = 0xb
call #strand_wait
iowr I[$r10 + 0x000] $r14 // 0x93c = <id>
mov $r12 0xa
iowr I[$r11 + 0x000] $r12 // 0x928 = 0xa
call #strand_wait
ret
// Initialise strand context data
//
// In : $r15 context base
// Out: $r15 context size (in bytes)
//
// Strandset(?) 3 hardcoded currently
//
strand_ctx_init:
trace_set(T_STRINIT)
call #strand_pre
mov $r14 3
call #strand_set
mov $r10 0x46fc
sethi $r10 0x20000
add b32 $r11 $r10 0x400
iowr I[$r10 + 0x100] $r0 // STRAND_FIRST_GENE = 0
mov $r12 1
iowr I[$r11 + 0x000] $r12 // STRAND_CMD = LATCH_FIRST_GENE
call #strand_wait
sub b32 $r12 $r0 1
iowr I[$r10 + 0x000] $r12 // STRAND_GENE_CNT = 0xffffffff
mov $r12 2
iowr I[$r11 + 0x000] $r12 // STRAND_CMD = LATCH_GENE_CNT
call #strand_wait
call #strand_post
// read the size of each strand, poke the context offset of
// each into STRAND_{SAVE,LOAD}_SWBASE now, no need to worry
// about it later then.
mov $r8 0x880
shl b32 $r8 6
iord $r9 I[$r8 + 0x000] // STRANDS
add b32 $r8 0x2200
shr b32 $r14 $r15 8
ctx_init_strand_loop:
iowr I[$r8 + 0x000] $r14 // STRAND_SAVE_SWBASE
iowr I[$r8 + 0x100] $r14 // STRAND_LOAD_SWBASE
iord $r10 I[$r8 + 0x200] // STRAND_SIZE
shr b32 $r10 6
add b32 $r10 1
add b32 $r14 $r10
add b32 $r8 4
sub b32 $r9 1
bra ne #ctx_init_strand_loop
shl b32 $r14 8
sub b32 $r15 $r14 $r15
trace_clr(T_STRINIT)
ret
')
drivers/gpu/drm/nouveau/core/engine/graph/fuc/os.h 0 → 100644
浏览文件 @ e99716f1
#ifndef __NVKM_GRAPH_OS_H__
#define __NVKM_GRAPH_OS_H__
#define E_BAD_COMMAND 0x00000001
#define E_CMD_OVERFLOW 0x00000002
#endif
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或