[POWERPC] FSL: enet device tree cleanups

* Removed address fields in ethernet nodes
* Removed #address-cells, #size-cells from gianfar nodes
* Added cell-index to gianfar and ucc ethernet nodes
* Added enet[0..3] labels
* Renamed compatible node for gianfar mdio to "fsl,gianfar-mdio"
* Removed device_type = "mdio"

The matching for gianfar mdio still supports the old "mdio"/"gianfar" combo
but it is now considered deprecated.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Documentation/powerpc/booting-without-of.txt

@@ -1223,16 +1223,14 @@ platforms are moved over to use the flattened-device-tree model.
 
   Required properties:
     - reg : Offset and length of the register set for the device
-    - device_type : Should be "mdio"
     - compatible : Should define the compatible device type for the
-      mdio.  Currently, this is most likely to be "gianfar"
+      mdio.  Currently, this is most likely to be "fsl,gianfar-mdio"
 
   Example:
 
 	mdio@24520 {
 		reg = <24520 20>;
-		device_type = "mdio"; 
-		compatible = "gianfar";
+		compatible = "fsl,gianfar-mdio";
 
 		ethernet-phy@0 {
 			......

arch/powerpc/boot/dts/mpc8313erdb.dts

@@ -95,11 +95,10 @@
 		};
 
 		mdio@24520 {
-			device_type = "mdio";
-			compatible = "gianfar";
-			reg = <24520 20>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <24520 20>;
 			phy1: ethernet-phy@1 {
 				interrupt-parent = < &ipic >;
 				interrupts = <13 8>;
@@ -114,7 +113,8 @@
 			};
 		};
 
-		ethernet@24000 {
+		enet0: ethernet@24000 {
+			cell-index = <0>;
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
@@ -125,7 +125,8 @@
 			phy-handle = < &phy1 >;
 		};
 
-		ethernet@25000 {
+		enet1: ethernet@25000 {
+			cell-index = <1>;
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";

arch/powerpc/boot/dts/mpc832x_mds.dts

@@ -208,20 +208,15 @@
 			mode = "slave";
 		};
 
-		ucc@2200 {
+		enet0: ucc@2200 {
 			device_type = "network";
 			compatible = "ucc_geth";
 			model = "UCC";
+			cell-index = <3>;
 			device-id = <3>;
 			reg = <2200 200>;
 			interrupts = <22>;
 			interrupt-parent = < &qeic >;
-			/*
-			 * mac-address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			mac-address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock = <19>;
 			tx-clock = <1a>;
@@ -229,20 +224,15 @@
 			pio-handle = < &pio3 >;
 		};
 
-		ucc@3200 {
+		enet1: ucc@3200 {
 			device_type = "network";
 			compatible = "ucc_geth";
 			model = "UCC";
+			cell-index = <4>;
 			device-id = <4>;
 			reg = <3200 200>;
 			interrupts = <23>;
 			interrupt-parent = < &qeic >;
-			/*
-			 * mac-address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			mac-address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock = <17>;
 			tx-clock = <18>;

arch/powerpc/boot/dts/mpc832x_rdb.dts

@@ -189,20 +189,15 @@
 			mode = "cpu";
 		};
 
-		ucc@3000 {
+		enet0: ucc@3000 {
 			device_type = "network";
 			compatible = "ucc_geth";
 			model = "UCC";
+			cell-index = <2>;
 			device-id = <2>;
 			reg = <3000 200>;
 			interrupts = <21>;
 			interrupt-parent = <&qeic>;
-			/*
-			 * mac-address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			mac-address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock = <20>;
 			tx-clock = <13>;
@@ -210,20 +205,15 @@
 			pio-handle = <&ucc2pio>;
 		};
 
-		ucc@2200 {
+		enet1: ucc@2200 {
 			device_type = "network";
 			compatible = "ucc_geth";
 			model = "UCC";
+			cell-index = <3>;
 			device-id = <3>;
 			reg = <2200 200>;
 			interrupts = <22>;
 			interrupt-parent = <&qeic>;
-			/*
-			 * mac-address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			mac-address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock = <19>;
 			tx-clock = <1a>;

arch/powerpc/boot/dts/mpc8349emitx.dts

@@ -106,11 +106,10 @@
 		};
 
 		mdio@24520 {
-			device_type = "mdio";
-			compatible = "gianfar";
-			reg = <24520 20>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <24520 20>;
 
 			/* Vitesse 8201 */
 			phy1c: ethernet-phy@1c {
@@ -129,17 +128,12 @@
 			};
 		};
 
-		ethernet@24000 {
+		enet0: ethernet@24000 {
+			cell-index = <0>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <24000 1000>;
-			/*
-			 * address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <20 8 21 8 22 8>;
 			interrupt-parent = < &ipic >;
@@ -147,19 +141,12 @@
 			linux,network-index = <0>;
 		};
 
-		ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet1: ethernet@25000 {
+			cell-index = <1>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <25000 1000>;
-			/*
-			 * address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <23 8 24 8 25 8>;
 			interrupt-parent = < &ipic >;

arch/powerpc/boot/dts/mpc8349emitxgp.dts

@@ -94,11 +94,10 @@
 		};
 
 		mdio@24520 {
-			device_type = "mdio";
-			compatible = "gianfar";
-			reg = <24520 20>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <24520 20>;
 
 			/* Vitesse 8201 */
 			phy1c: ethernet-phy@1c {
@@ -109,7 +108,8 @@
 			};
 		};
 
-		ethernet@24000 {
+		enet0: ethernet@24000 {
+			cell-index = <0>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";

arch/powerpc/boot/dts/mpc834x_mds.dts

@@ -119,11 +119,11 @@
 		};
 
 		mdio@24520 {
-			device_type = "mdio";
-			compatible = "gianfar";
-			reg = <24520 20>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <24520 20>;
+
 			phy0: ethernet-phy@0 {
 				interrupt-parent = < &ipic >;
 				interrupts = <11 8>;
@@ -138,17 +138,12 @@
 			};
 		};
 
-		ethernet@24000 {
+		enet0: ethernet@24000 {
+			cell-index = <0>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <24000 1000>;
-			/*
-			 * address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <20 8 21 8 22 8>;
 			interrupt-parent = < &ipic >;
@@ -156,19 +151,12 @@
 			linux,network-index = <0>;
 		};
 
-		ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet1: ethernet@25000 {
+			cell-index = <1>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <25000 1000>;
-			/*
-			 * address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <23 8 24 8 25 8>;
 			interrupt-parent = < &ipic >;

arch/powerpc/boot/dts/mpc836x_mds.dts

@@ -239,20 +239,15 @@
 			mode = "slave";
 		};
 
-		ucc@2000 {
+		enet0: ucc@2000 {
 			device_type = "network";
 			compatible = "ucc_geth";
 			model = "UCC";
+			cell-index = <1>;
 			device-id = <1>;
 			reg = <2000 200>;
 			interrupts = <20>;
 			interrupt-parent = < &qeic >;
-			/*
-			 * mac-address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			mac-address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock = <0>;
 			tx-clock = <19>;
@@ -261,20 +256,15 @@
 			pio-handle = < &pio1 >;
 		};
 
-		ucc@3000 {
+		enet1: ucc@3000 {
 			device_type = "network";
 			compatible = "ucc_geth";
 			model = "UCC";
+			cell-index = <2>;
 			device-id = <2>;
 			reg = <3000 200>;
 			interrupts = <21>;
 			interrupt-parent = < &qeic >;
-			/*
-			 * mac-address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			mac-address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock = <0>;
 			tx-clock = <14>;

arch/powerpc/boot/dts/mpc8540ads.dts

@@ -76,9 +76,9 @@
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			device_type = "mdio";
-			compatible = "gianfar";
+			compatible = "fsl,gianfar-mdio";
 			reg = <24520 20>;
+
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
@@ -99,57 +99,36 @@
 			};
 		};
 
-		ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet0: ethernet@24000 {
+			cell-index = <0>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <24000 1000>;
-			/*
-			 * address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <1d 2 1e 2 22 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
 		};
 
-		ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet1: ethernet@25000 {
+			cell-index = <1>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <25000 1000>;
-			/*
-			 * address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <23 2 24 2 28 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 		};
 
-		ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet2: ethernet@26000 {
+			cell-index = <2>;
 			device_type = "network";
 			model = "FEC";
 			compatible = "gianfar";
 			reg = <26000 1000>;
-			/*
-			 * address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <29 2>;
 			interrupt-parent = <&mpic>;

arch/powerpc/boot/dts/mpc8541cds.dts

@@ -76,9 +76,9 @@
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			device_type = "mdio";
-			compatible = "gianfar";
+			compatible = "fsl,gianfar-mdio";
 			reg = <24520 20>;
+
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
@@ -93,9 +93,8 @@
 			};
 		};
 
-		ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet0: ethernet@24000 {
+			cell-index = <0>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
@@ -106,9 +105,8 @@
 			phy-handle = <&phy0>;
 		};
 
-		ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet1: ethernet@25000 {
+			cell-index = <1>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";

arch/powerpc/boot/dts/mpc8544ds.dts

@@ -88,9 +88,9 @@
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			device_type = "mdio";
-			compatible = "gianfar";
+			compatible = "fsl,gianfar-mdio";
 			reg = <24520 20>;
+
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
 				interrupts = <a 1>;
@@ -105,9 +105,8 @@
 			};
 		};
 
-		ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet0: ethernet@24000 {
+			cell-index = <0>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
@@ -119,9 +118,8 @@
 			phy-connection-type = "rgmii-id";
 		};
 
-		ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet1: ethernet@26000 {
+			cell-index = <1>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";

arch/powerpc/boot/dts/mpc8548cds.dts

@@ -87,9 +87,9 @@
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			device_type = "mdio";
-			compatible = "gianfar";
+			compatible = "fsl,gianfar-mdio";
 			reg = <24520 20>;
+
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
@@ -116,9 +116,8 @@
 			};
 		};
 
-		ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet0: ethernet@24000 {
+			cell-index = <0>;
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
@@ -129,9 +128,8 @@
 			phy-handle = <&phy0>;
 		};
 
-		ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet1: ethernet@25000 {
+			cell-index = <1>;
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
@@ -143,9 +141,8 @@
 		};
 
 /* eTSEC 3/4 are currently broken
-		ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet2: ethernet@26000 {
+			cell-index = <2>;
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
@@ -156,9 +153,8 @@
 			phy-handle = <&phy2>;
 		};
 
-		ethernet@27000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet3: ethernet@27000 {
+			cell-index = <3>;
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";

arch/powerpc/boot/dts/mpc8555cds.dts

@@ -76,9 +76,9 @@
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			device_type = "mdio";
-			compatible = "gianfar";
+			compatible = "fsl,gianfar-mdio";
 			reg = <24520 20>;
+
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
@@ -93,9 +93,8 @@
 			};
 		};
 
-		ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet0: ethernet@24000 {
+			cell-index = <0>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
@@ -106,9 +105,8 @@
 			phy-handle = <&phy0>;
 		};
 
-		ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet1: ethernet@25000 {
+			cell-index = <1>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";

arch/powerpc/boot/dts/mpc8560ads.dts

@@ -63,11 +63,11 @@
 		};
 
 		mdio@24520 {
-			device_type = "mdio";
-			compatible = "gianfar";
-			reg = <24520 20>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <24520 20>;
+
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
@@ -94,36 +94,24 @@
 			};
 		};
 
-		ethernet@24000 {
+		enet0: ethernet@24000 {
+			cell-index = <0>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <24000 1000>;
-			/*
-			 * address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <1d 2 1e 2 22 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
 		};
 
-		ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet1: ethernet@25000 {
+			cell-index = <1>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <25000 1000>;
-			/*
-			 * address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <23 2 24 2 28 2>;
 			interrupt-parent = <&mpic>;
@@ -198,17 +186,11 @@
 				interrupt-parent = <&cpmpic>;
 			};
 
-			ethernet@91320 {
+			enet2: ethernet@91320 {
 				device_type = "network";
 				compatible = "fsl,mpc8560-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
 				reg = <91320 20 88500 100 913b0 1>;
-				/*
-				 * mac-address is deprecated and will be removed
-				 * in 2.6.25.  Only recent versions of
-				 * U-Boot support local-mac-address, however.
-				 */
-				mac-address = [ 00 00 00 00 00 00 ];
 				local-mac-address = [ 00 00 00 00 00 00 ];
 				fsl,cpm-command = <16200300>;
 				interrupts = <21 8>;
@@ -216,17 +198,11 @@
 				phy-handle = <&phy2>;
 			};
 
-			ethernet@91340 {
+			enet3: ethernet@91340 {
 				device_type = "network";
 				compatible = "fsl,mpc8560-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
 				reg = <91340 20 88600 100 913d0 1>;
-				/*
-				 * mac-address is deprecated and will be removed
-				 * in 2.6.25.  Only recent versions of
-				 * U-Boot support local-mac-address, however.
-				 */
-				mac-address = [ 00 00 00 00 00 00 ];
 				local-mac-address = [ 00 00 00 00 00 00 ];
 				fsl,cpm-command = <1a400300>;
 				interrupts = <22 8>;

arch/powerpc/boot/dts/mpc8568mds.dts

@@ -101,9 +101,9 @@
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			device_type = "mdio";
-			compatible = "gianfar";
+			compatible = "fsl,gianfar-mdio";
 			reg = <24520 20>;
+
 			phy0: ethernet-phy@7 {
 				interrupt-parent = <&mpic>;
 				interrupts = <1 1>;
@@ -130,38 +130,24 @@
 			};
 		};
 
-		ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet0: ethernet@24000 {
+			cell-index = <0>;
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
 			reg = <24000 1000>;
-			/*
-			 * mac-address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			mac-address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
  			interrupts = <1d 2 1e 2 22 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy2>;
 		};
 
-		ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet1: ethernet@25000 {
+			cell-index = <1>;
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
 			reg = <25000 1000>;
-			/*
-			 * mac-address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			mac-address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
  			interrupts = <23 2 24 2 28 2>;
 			interrupt-parent = <&mpic>;
@@ -318,20 +304,15 @@
 			mode = "cpu";
 		};
 
-		ucc@2000 {
+		enet2: ucc@2000 {
 			device_type = "network";
 			compatible = "ucc_geth";
 			model = "UCC";
+			cell-index = <1>;
 			device-id = <1>;
 			reg = <2000 200>;
 			interrupts = <20>;
 			interrupt-parent = <&qeic>;
-			/*
-			 * mac-address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			mac-address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock = <0>;
 			tx-clock = <20>;
@@ -340,20 +321,15 @@
 			phy-connection-type = "rgmii-id";
 		};
 
-		ucc@3000 {
+		enet3: ucc@3000 {
 			device_type = "network";
 			compatible = "ucc_geth";
 			model = "UCC";
+			cell-index = <2>;
 			device-id = <2>;
 			reg = <3000 200>;
 			interrupts = <21>;
 			interrupt-parent = <&qeic>;
-			/*
-			 * mac-address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			mac-address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock = <0>;
 			tx-clock = <20>;
@@ -366,7 +342,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2120 18>;
-			device_type = "mdio";
 			compatible = "ucc_geth_phy";
 
 			/* These are the same PHYs as on

arch/powerpc/boot/dts/mpc8572ds.dts

@@ -93,9 +93,9 @@
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			device_type = "mdio";
-			compatible = "gianfar";
+			compatible = "fsl,gianfar-mdio";
 			reg = <24520 20>;
+
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
 				interrupts = <a 1>;
@@ -118,9 +118,8 @@
 			};
 		};
 
-		ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet0: ethernet@24000 {
+			cell-index = <0>;
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
@@ -132,9 +131,8 @@
 			phy-connection-type = "rgmii-id";
 		};
 
-		ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet1: ethernet@25000 {
+			cell-index = <1>;
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
@@ -146,9 +144,8 @@
 			phy-connection-type = "rgmii-id";
 		};
 
-		ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet2: ethernet@26000 {
+			cell-index = <2>;
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
@@ -160,9 +157,8 @@
 			phy-connection-type = "rgmii-id";
 		};
 
-		ethernet@27000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		enet3: ethernet@27000 {
+			cell-index = <3>;
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";

arch/powerpc/boot/dts/mpc8641_hpcn.dts

@@ -93,9 +93,9 @@
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			device_type = "mdio";
-			compatible = "gianfar";
+			compatible = "fsl,gianfar-mdio";
 			reg = <24520 20>;
+
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
 				interrupts = <a 1>;
@@ -123,18 +123,11 @@
 		};
 
 		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+			cell-index = <0>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <24000 1000>;
-			/*
-			 * mac-address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			mac-address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <1d 2 1e 2 22 2>;
 			interrupt-parent = <&mpic>;
@@ -143,18 +136,11 @@
 		};
 
 		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+			cell-index = <1>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <25000 1000>;
-			/*
-			 * mac-address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			mac-address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <23 2 24 2 28 2>;
 			interrupt-parent = <&mpic>;
@@ -163,18 +149,11 @@
 		};
 		
 		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+			cell-index = <2>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <26000 1000>;
-			/*
-			 * mac-address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			mac-address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <1F 2 20 2 21 2>;
 			interrupt-parent = <&mpic>;
@@ -183,18 +162,11 @@
 		};
 
 		enet3: ethernet@27000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
+			cell-index = <3>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <27000 1000>;
-			/*
-			 * mac-address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			mac-address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <25 2 26 2 27 2>;
 			interrupt-parent = <&mpic>;

arch/powerpc/sysdev/fsl_soc.c

@@ -132,15 +132,18 @@ EXPORT_SYMBOL(get_baudrate);
 
 static int __init gfar_mdio_of_init(void)
 {
-	struct device_node *np;
-	unsigned int i;
+	struct device_node *np = NULL;
 	struct platform_device *mdio_dev;
 	struct resource res;
 	int ret;
 
-	for (np = NULL, i = 0;
-	     (np = of_find_compatible_node(np, "mdio", "gianfar")) != NULL;
-	     i++) {
+	np = of_find_compatible_node(np, NULL, "fsl,gianfar-mdio");
+
+	/* try the deprecated version */
+	if (!np)
+		np = of_find_compatible_node(np, "mdio", "gianfar");
+
+	if (np) {
 		int k;
 		struct device_node *child = NULL;
 		struct gianfar_mdio_data mdio_data;
@@ -179,11 +182,13 @@ static int __init gfar_mdio_of_init(void)
 			goto unreg;
 	}
 
+	of_node_put(np);
 	return 0;
 
 unreg:
 	platform_device_unregister(mdio_dev);
 err:
+	of_node_put(np);
 	return ret;
 }