ARM: integrator: remove static CP syscon mapping

This removes the static mapping for the CP system controller for
the device tree case. Fork the static mappings table and move
the system controller to only be statically mapped in the ATAG
boot path.
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

arch/arm/mach-integrator/integrator_cp.c

@@ -52,11 +52,13 @@
 
 #include "common.h"
 
+/* Base address to the CP controller */
+static void __iomem *intcp_con_base;
+
 #define INTCP_PA_FLASH_BASE		0x24000000
 
 #define INTCP_PA_CLCD_BASE		0xc0000000
 
-#define INTCP_VA_CTRL_BASE		__io_address(INTEGRATOR_CP_CTL_BASE)
 #define INTCP_FLASHPROG			0x04
 #define CINTEGRATOR_FLASHPROG_FLVPPEN	(1 << 0)
 #define CINTEGRATOR_FLASHPROG_FLWREN	(1 << 1)
@@ -127,11 +129,6 @@ static struct map_desc intcp_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(INTEGRATOR_CP_SIC_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_CP_CTL_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_CP_CTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
 	}
 };
 
@@ -147,9 +144,9 @@ static int intcp_flash_init(struct platform_device *dev)
 {
 	u32 val;
 
-	val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
+	val = readl(intcp_con_base + INTCP_FLASHPROG);
 	val |= CINTEGRATOR_FLASHPROG_FLWREN;
-	writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
+	writel(val, intcp_con_base + INTCP_FLASHPROG);
 
 	return 0;
 }
@@ -158,21 +155,21 @@ static void intcp_flash_exit(struct platform_device *dev)
 {
 	u32 val;
 
-	val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
+	val = readl(intcp_con_base + INTCP_FLASHPROG);
 	val &= ~(CINTEGRATOR_FLASHPROG_FLVPPEN|CINTEGRATOR_FLASHPROG_FLWREN);
-	writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
+	writel(val, intcp_con_base + INTCP_FLASHPROG);
 }
 
 static void intcp_flash_set_vpp(struct platform_device *pdev, int on)
 {
 	u32 val;
 
-	val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
+	val = readl(intcp_con_base + INTCP_FLASHPROG);
 	if (on)
 		val |= CINTEGRATOR_FLASHPROG_FLVPPEN;
 	else
 		val &= ~CINTEGRATOR_FLASHPROG_FLVPPEN;
-	writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
+	writel(val, intcp_con_base + INTCP_FLASHPROG);
 }
 
 static struct physmap_flash_data intcp_flash_data = {
@@ -191,7 +188,7 @@ static struct physmap_flash_data intcp_flash_data = {
 static unsigned int mmc_status(struct device *dev)
 {
 	unsigned int status = readl(__io_address(0xca000000 + 4));
-	writel(8, __io_address(INTEGRATOR_CP_CTL_BASE + 8));
+	writel(8, intcp_con_base + 8);
 
 	return status & 8;
 }
@@ -337,9 +334,6 @@ static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
 	{ /* sentinel */ },
 };
 
-/* Base address to the CP controller */
-static void __iomem *intcp_con_base;
-
 static void __init intcp_init_of(void)
 {
 	struct device_node *root;
@@ -417,6 +411,28 @@ MACHINE_END
 
 #ifdef CONFIG_ATAGS
 
+/*
+ * For the ATAG boot some static mappings are needed. This will
+ * go away with the ATAG support down the road.
+ */
+
+static struct map_desc intcp_io_desc_atag[] __initdata = {
+	{
+		.virtual	= IO_ADDRESS(INTEGRATOR_CP_CTL_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_CP_CTL_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	},
+};
+
+static void __init intcp_map_io_atag(void)
+{
+	iotable_init(intcp_io_desc_atag, ARRAY_SIZE(intcp_io_desc_atag));
+	intcp_con_base = __io_address(INTEGRATOR_CP_CTL_BASE);
+	intcp_map_io();
+}
+
+
 /*
  * This is where non-devicetree initialization code is collected and stashed
  * for eventual deletion.
@@ -556,7 +572,7 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
 	.atag_offset	= 0x100,
 	.reserve	= integrator_reserve,
-	.map_io		= intcp_map_io,
+	.map_io		= intcp_map_io_atag,
 	.nr_irqs	= NR_IRQS_INTEGRATOR_CP,
 	.init_early	= intcp_init_early,
 	.init_irq	= intcp_init_irq,