ARM: dts: imx6q-utilite-pro: add hpd gpio

The hpd pin of the second hdmi connector of the Utilite Pro is wired
up to a gpio pin of the SoC. Reflect this in the device tree.
Signed-off-by: NChristopher Spinrath <christopher.spinrath@rwth-aachen.de>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx6q-utilite-pro.dts

@@ -101,9 +101,11 @@
 
 	hdmi-connector {
 		compatible = "hdmi-connector";
-
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hpd>;
 		type = "a";
 		ddc-i2c-bus = <&i2c_dvi_ddc>;
+		hpd-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 
 		port {
 			hdmi_connector_in: endpoint {
@@ -209,6 +211,12 @@
 		>;
 	};
 
+	pinctrl_hpd: hpdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1