Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stable

arch/arm/Kconfig

@@ -433,6 +433,17 @@ config ARCH_L7200
 	  If you have any questions or comments about the Linux kernel port
 	  to this board, send e-mail to <sjhill@cotw.com>.
 
+config ARCH_DOVE
+	bool "Marvell Dove"
+	select PCI
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select PLAT_ORION
+	help
+	  Support for the Marvell Dove SoC 88AP510
+
 config ARCH_KIRKWOOD
 	bool "Marvell Kirkwood"
 	select CPU_FEROCEON
@@ -747,6 +758,8 @@ source "arch/arm/mach-orion5x/Kconfig"
 
 source "arch/arm/mach-kirkwood/Kconfig"
 
+source "arch/arm/mach-dove/Kconfig"
+
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c64xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"

arch/arm/Makefile

@@ -122,6 +122,7 @@ machine-$(CONFIG_ARCH_AT91)		:= at91
 machine-$(CONFIG_ARCH_BCMRING)		:= bcmring
 machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
 machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
+machine-$(CONFIG_ARCH_DOVE)		:= dove
 machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
 machine-$(CONFIG_ARCH_EP93XX)		:= ep93xx
 machine-$(CONFIG_ARCH_GEMINI)		:= gemini

arch/arm/boot/compressed/head.S

@@ -743,6 +743,12 @@ proc_types:
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv6_mmu_cache_flush
 
+		.word	0x560f5810		@ Marvell PJ4 ARMv6
+		.word	0xff0ffff0
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv6_mmu_cache_flush
+
 		.word	0x000f0000		@ new CPU Id
 		.word	0x000f0000
 		W(b)	__armv7_mmu_cache_on

arch/arm/include/asm/hardware/cache-tauros2.h

+/*
+ * arch/arm/include/asm/hardware/cache-tauros2.h
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+extern void __init tauros2_init(void);

arch/arm/mach-dove/Kconfig

+if ARCH_DOVE
+
+menu "Marvell Dove Implementations"
+
+config MACH_DOVE_DB
+	bool "Marvell DB-MV88AP510 Development Board"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell DB-MV88AP510 Development Board.
+
+endmenu
+
+endif

arch/arm/mach-dove/Makefile

+obj-y				+= common.o addr-map.o irq.o pcie.o
+
+obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o

arch/arm/mach-dove/Makefile.boot

+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000

arch/arm/mach-dove/addr-map.c

+/*
+ * arch/arm/mach-dove/addr-map.c
+ *
+ * Address map functions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+#include "common.h"
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR		0x0
+#define TARGET_BOOTROM		0x1
+#define TARGET_CESA		0x3
+#define TARGET_PCIE0		0x4
+#define TARGET_PCIE1		0x8
+#define TARGET_SCRATCHPAD	0xd
+
+#define ATTR_CESA		0x01
+#define ATTR_BOOTROM		0xfd
+#define ATTR_DEV_SPI0_ROM	0xfe
+#define ATTR_DEV_SPI1_ROM	0xfb
+#define ATTR_PCIE_IO		0xe0
+#define ATTR_PCIE_MEM		0xe8
+#define ATTR_SCRATCHPAD		0x0
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define WIN_CTRL(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0x0)
+#define WIN_BASE(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0x4)
+#define WIN_REMAP_LO(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0x8)
+#define WIN_REMAP_HI(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0xc)
+
+struct mbus_dram_target_info dove_mbus_dram_info;
+
+static inline void __iomem *ddr_map_sc(int i)
+{
+	return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4));
+}
+
+static int cpu_win_can_remap(int win)
+{
+	if (win < 4)
+		return 1;
+
+	return 0;
+}
+
+static void __init setup_cpu_win(int win, u32 base, u32 size,
+				 u8 target, u8 attr, int remap)
+{
+	u32 ctrl;
+
+	base &= 0xffff0000;
+	ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
+
+	writel(base, WIN_BASE(win));
+	writel(ctrl, WIN_CTRL(win));
+	if (cpu_win_can_remap(win)) {
+		if (remap < 0)
+			remap = base;
+		writel(remap & 0xffff0000, WIN_REMAP_LO(win));
+		writel(0, WIN_REMAP_HI(win));
+	}
+}
+
+void __init dove_setup_cpu_mbus(void)
+{
+	int i;
+	int cs;
+
+	/*
+	 * First, disable and clear windows.
+	 */
+	for (i = 0; i < 8; i++) {
+		writel(0, WIN_BASE(i));
+		writel(0, WIN_CTRL(i));
+		if (cpu_win_can_remap(i)) {
+			writel(0, WIN_REMAP_LO(i));
+			writel(0, WIN_REMAP_HI(i));
+		}
+	}
+
+	/*
+	 * Setup windows for PCIe IO+MEM space.
+	 */
+	setup_cpu_win(0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
+		      TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE);
+	setup_cpu_win(1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
+		      TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE);
+	setup_cpu_win(2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
+		      TARGET_PCIE0, ATTR_PCIE_MEM, -1);
+	setup_cpu_win(3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
+		      TARGET_PCIE1, ATTR_PCIE_MEM, -1);
+
+	/*
+	 * Setup window for CESA engine.
+	 */
+	setup_cpu_win(4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
+		      TARGET_CESA, ATTR_CESA, -1);
+
+	/*
+	 * Setup the Window to the BootROM for Standby and Sleep Resume
+	 */
+	setup_cpu_win(5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
+		      TARGET_BOOTROM, ATTR_BOOTROM, -1);
+
+	/*
+	 * Setup the Window to the PMU Scratch Pad space
+	 */
+	setup_cpu_win(6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
+		      TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1);
+
+	/*
+	 * Setup MBUS dram target info.
+	 */
+	dove_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+	for (i = 0, cs = 0; i < 2; i++) {
+		u32 map = readl(ddr_map_sc(i));
+
+		/*
+		 * Chip select enabled?
+		 */
+		if (map & 1) {
+			struct mbus_dram_window *w;
+
+			w = &dove_mbus_dram_info.cs[cs++];
+			w->cs_index = i;
+			w->mbus_attr = 0; /* CS address decoding done inside */
+					  /* the DDR controller, no need to  */
+					  /* provide attributes */
+			w->base = map & 0xff800000;
+			w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
+		}
+	}
+	dove_mbus_dram_info.num_cs = cs;
+}

arch/arm/mach-dove/common.c

+/*
+ * arch/arm/mach-dove/common.c
+ *
+ * Core functions for Marvell Dove 88AP510 System On Chip
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+#include <linux/clk.h>
+#include <linux/mbus.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/gpio.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/timex.h>
+#include <asm/hardware/cache-tauros2.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/pci.h>
+#include <mach/dove.h>
+#include <mach/bridge-regs.h>
+#include <asm/mach/arch.h>
+#include <linux/irq.h>
+#include <plat/mv_xor.h>
+#include <plat/ehci-orion.h>
+#include <plat/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc dove_io_desc[] __initdata = {
+	{
+		.virtual	= DOVE_SB_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),
+		.length		= DOVE_SB_REGS_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= DOVE_NB_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE),
+		.length		= DOVE_NB_REGS_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= DOVE_PCIE0_IO_VIRT_BASE,
+		.pfn		= __phys_to_pfn(DOVE_PCIE0_IO_PHYS_BASE),
+		.length		= DOVE_PCIE0_IO_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= DOVE_PCIE1_IO_VIRT_BASE,
+		.pfn		= __phys_to_pfn(DOVE_PCIE1_IO_PHYS_BASE),
+		.length		= DOVE_PCIE1_IO_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init dove_map_io(void)
+{
+	iotable_init(dove_io_desc, ARRAY_SIZE(dove_io_desc));
+}
+
+/*****************************************************************************
+ * EHCI
+ ****************************************************************************/
+static struct orion_ehci_data dove_ehci_data = {
+	.dram		= &dove_mbus_dram_info,
+	.phy_version	= EHCI_PHY_NA,
+};
+
+static u64 ehci_dmamask = DMA_BIT_MASK(32);
+
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
+static struct resource dove_ehci0_resources[] = {
+	{
+		.start	= DOVE_USB0_PHYS_BASE,
+		.end	= DOVE_USB0_PHYS_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_USB0,
+		.end	= IRQ_DOVE_USB0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_ehci0 = {
+	.name		= "orion-ehci",
+	.id		= 0,
+	.dev		= {
+		.dma_mask		= &ehci_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &dove_ehci_data,
+	},
+	.resource	= dove_ehci0_resources,
+	.num_resources	= ARRAY_SIZE(dove_ehci0_resources),
+};
+
+void __init dove_ehci0_init(void)
+{
+	platform_device_register(&dove_ehci0);
+}
+
+/*****************************************************************************
+ * EHCI1
+ ****************************************************************************/
+static struct resource dove_ehci1_resources[] = {
+	{
+		.start	= DOVE_USB1_PHYS_BASE,
+		.end	= DOVE_USB1_PHYS_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_USB1,
+		.end	= IRQ_DOVE_USB1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_ehci1 = {
+	.name		= "orion-ehci",
+	.id		= 1,
+	.dev		= {
+		.dma_mask		= &ehci_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &dove_ehci_data,
+	},
+	.resource	= dove_ehci1_resources,
+	.num_resources	= ARRAY_SIZE(dove_ehci1_resources),
+};
+
+void __init dove_ehci1_init(void)
+{
+	platform_device_register(&dove_ehci1);
+}
+
+/*****************************************************************************
+ * GE00
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data dove_ge00_shared_data = {
+	.t_clk		= 0,
+	.dram		= &dove_mbus_dram_info,
+};
+
+static struct resource dove_ge00_shared_resources[] = {
+	{
+		.name	= "ge00 base",
+		.start	= DOVE_GE00_PHYS_BASE + 0x2000,
+		.end	= DOVE_GE00_PHYS_BASE + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dove_ge00_shared = {
+	.name		= MV643XX_ETH_SHARED_NAME,
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &dove_ge00_shared_data,
+	},
+	.num_resources	= 1,
+	.resource	= dove_ge00_shared_resources,
+};
+
+static struct resource dove_ge00_resources[] = {
+	{
+		.name	= "ge00 irq",
+		.start	= IRQ_DOVE_GE00_SUM,
+		.end	= IRQ_DOVE_GE00_SUM,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_ge00 = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= dove_ge00_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	eth_data->shared = &dove_ge00_shared;
+	dove_ge00.dev.platform_data = eth_data;
+
+	platform_device_register(&dove_ge00_shared);
+	platform_device_register(&dove_ge00);
+}
+
+/*****************************************************************************
+ * SoC RTC
+ ****************************************************************************/
+static struct resource dove_rtc_resource[] = {
+	{
+		.start	= DOVE_RTC_PHYS_BASE,
+		.end	= DOVE_RTC_PHYS_BASE + 32 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_RTC,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+void __init dove_rtc_init(void)
+{
+	platform_device_register_simple("rtc-mv", -1, dove_rtc_resource, 2);
+}
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct resource dove_sata_resources[] = {
+	{
+		.name	= "sata base",
+		.start	= DOVE_SATA_PHYS_BASE,
+		.end	= DOVE_SATA_PHYS_BASE + 0x5000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "sata irq",
+		.start	= IRQ_DOVE_SATA,
+		.end	= IRQ_DOVE_SATA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_sata = {
+	.name		= "sata_mv",
+	.id		= 0,
+	.dev		= {
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(dove_sata_resources),
+	.resource	= dove_sata_resources,
+};
+
+void __init dove_sata_init(struct mv_sata_platform_data *sata_data)
+{
+	sata_data->dram = &dove_mbus_dram_info;
+	dove_sata.dev.platform_data = sata_data;
+	platform_device_register(&dove_sata);
+}
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart0_data[] = {
+	{
+		.mapbase	= DOVE_UART0_PHYS_BASE,
+		.membase	= (char *)DOVE_UART0_VIRT_BASE,
+		.irq		= IRQ_DOVE_UART_0,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource dove_uart0_resources[] = {
+	{
+		.start		= DOVE_UART0_PHYS_BASE,
+		.end		= DOVE_UART0_PHYS_BASE + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_DOVE_UART_0,
+		.end		= IRQ_DOVE_UART_0,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_uart0 = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= dove_uart0_data,
+	},
+	.resource		= dove_uart0_resources,
+	.num_resources		= ARRAY_SIZE(dove_uart0_resources),
+};
+
+void __init dove_uart0_init(void)
+{
+	platform_device_register(&dove_uart0);
+}
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart1_data[] = {
+	{
+		.mapbase	= DOVE_UART1_PHYS_BASE,
+		.membase	= (char *)DOVE_UART1_VIRT_BASE,
+		.irq		= IRQ_DOVE_UART_1,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource dove_uart1_resources[] = {
+	{
+		.start		= DOVE_UART1_PHYS_BASE,
+		.end		= DOVE_UART1_PHYS_BASE + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_DOVE_UART_1,
+		.end		= IRQ_DOVE_UART_1,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_uart1 = {
+	.name			= "serial8250",
+	.id			= 1,
+	.dev			= {
+		.platform_data	= dove_uart1_data,
+	},
+	.resource		= dove_uart1_resources,
+	.num_resources		= ARRAY_SIZE(dove_uart1_resources),
+};
+
+void __init dove_uart1_init(void)
+{
+	platform_device_register(&dove_uart1);
+}
+
+/*****************************************************************************
+ * UART2
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart2_data[] = {
+	{
+		.mapbase	= DOVE_UART2_PHYS_BASE,
+		.membase	= (char *)DOVE_UART2_VIRT_BASE,
+		.irq		= IRQ_DOVE_UART_2,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource dove_uart2_resources[] = {
+	{
+		.start		= DOVE_UART2_PHYS_BASE,
+		.end		= DOVE_UART2_PHYS_BASE + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_DOVE_UART_2,
+		.end		= IRQ_DOVE_UART_2,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_uart2 = {
+	.name			= "serial8250",
+	.id			= 2,
+	.dev			= {
+		.platform_data	= dove_uart2_data,
+	},
+	.resource		= dove_uart2_resources,
+	.num_resources		= ARRAY_SIZE(dove_uart2_resources),
+};
+
+void __init dove_uart2_init(void)
+{
+	platform_device_register(&dove_uart2);
+}
+
+/*****************************************************************************
+ * UART3
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart3_data[] = {
+	{
+		.mapbase	= DOVE_UART3_PHYS_BASE,
+		.membase	= (char *)DOVE_UART3_VIRT_BASE,
+		.irq		= IRQ_DOVE_UART_3,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource dove_uart3_resources[] = {
+	{
+		.start		= DOVE_UART3_PHYS_BASE,
+		.end		= DOVE_UART3_PHYS_BASE + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_DOVE_UART_3,
+		.end		= IRQ_DOVE_UART_3,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_uart3 = {
+	.name			= "serial8250",
+	.id			= 3,
+	.dev			= {
+		.platform_data	= dove_uart3_data,
+	},
+	.resource		= dove_uart3_resources,
+	.num_resources		= ARRAY_SIZE(dove_uart3_resources),
+};
+
+void __init dove_uart3_init(void)
+{
+	platform_device_register(&dove_uart3);
+}
+
+/*****************************************************************************
+ * SPI0
+ ****************************************************************************/
+static struct orion_spi_info dove_spi0_data = {
+	.tclk		= 0,
+};
+
+static struct resource dove_spi0_resources[] = {
+	{
+		.start	= DOVE_SPI0_PHYS_BASE,
+		.end	= DOVE_SPI0_PHYS_BASE + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_SPI0,
+		.end	= IRQ_DOVE_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_spi0 = {
+	.name		= "orion_spi",
+	.id		= 0,
+	.resource	= dove_spi0_resources,
+	.dev		= {
+		.platform_data	= &dove_spi0_data,
+	},
+	.num_resources	= ARRAY_SIZE(dove_spi0_resources),
+};
+
+void __init dove_spi0_init(void)
+{
+	platform_device_register(&dove_spi0);
+}
+
+/*****************************************************************************
+ * SPI1
+ ****************************************************************************/
+static struct orion_spi_info dove_spi1_data = {
+	.tclk		= 0,
+};
+
+static struct resource dove_spi1_resources[] = {
+	{
+		.start	= DOVE_SPI1_PHYS_BASE,
+		.end	= DOVE_SPI1_PHYS_BASE + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_SPI1,
+		.end	= IRQ_DOVE_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_spi1 = {
+	.name		= "orion_spi",
+	.id		= 1,
+	.resource	= dove_spi1_resources,
+	.dev		= {
+		.platform_data	= &dove_spi1_data,
+	},
+	.num_resources	= ARRAY_SIZE(dove_spi1_resources),
+};
+
+void __init dove_spi1_init(void)
+{
+	platform_device_register(&dove_spi1);
+}
+
+/*****************************************************************************
+ * I2C
+ ****************************************************************************/
+static struct mv64xxx_i2c_pdata dove_i2c_data = {
+	.freq_m		= 10, /* assumes 166 MHz TCLK gets 94.3kHz */
+	.freq_n		= 3,
+	.timeout	= 1000, /* Default timeout of 1 second */
+};
+
+static struct resource dove_i2c_resources[] = {
+	{
+		.name	= "i2c base",
+		.start	= DOVE_I2C_PHYS_BASE,
+		.end	= DOVE_I2C_PHYS_BASE + 0x20 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "i2c irq",
+		.start	= IRQ_DOVE_I2C,
+		.end	= IRQ_DOVE_I2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_i2c = {
+	.name		= MV64XXX_I2C_CTLR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dove_i2c_resources),
+	.resource	= dove_i2c_resources,
+	.dev		= {
+		.platform_data = &dove_i2c_data,
+	},
+};
+
+void __init dove_i2c_init(void)
+{
+	platform_device_register(&dove_i2c);
+}
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+static int get_tclk(void)
+{
+	/* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */
+	return 166666667;
+}
+
+static void dove_timer_init(void)
+{
+	orion_time_init(IRQ_DOVE_BRIDGE, get_tclk());
+}
+
+struct sys_timer dove_timer = {
+	.init = dove_timer_init,
+};
+
+/*****************************************************************************
+ * XOR
+ ****************************************************************************/
+static struct mv_xor_platform_shared_data dove_xor_shared_data = {
+	.dram		= &dove_mbus_dram_info,
+};
+
+/*****************************************************************************
+ * XOR 0
+ ****************************************************************************/
+static u64 dove_xor0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource dove_xor0_shared_resources[] = {
+	{
+		.name	= "xor 0 low",
+		.start	= DOVE_XOR0_PHYS_BASE,
+		.end	= DOVE_XOR0_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "xor 0 high",
+		.start	= DOVE_XOR0_HIGH_PHYS_BASE,
+		.end	= DOVE_XOR0_HIGH_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dove_xor0_shared = {
+	.name		= MV_XOR_SHARED_NAME,
+	.id		= 0,
+	.dev		= {
+		.platform_data = &dove_xor_shared_data,
+	},
+	.num_resources	= ARRAY_SIZE(dove_xor0_shared_resources),
+	.resource	= dove_xor0_shared_resources,
+};
+
+static struct resource dove_xor00_resources[] = {
+	[0] = {
+		.start	= IRQ_DOVE_XOR_00,
+		.end	= IRQ_DOVE_XOR_00,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data dove_xor00_data = {
+	.shared		= &dove_xor0_shared,
+	.hw_id		= 0,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device dove_xor00_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dove_xor00_resources),
+	.resource	= dove_xor00_resources,
+	.dev		= {
+		.dma_mask		= &dove_xor0_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(64),
+		.platform_data		= (void *)&dove_xor00_data,
+	},
+};
+
+static struct resource dove_xor01_resources[] = {
+	[0] = {
+		.start	= IRQ_DOVE_XOR_01,
+		.end	= IRQ_DOVE_XOR_01,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data dove_xor01_data = {
+	.shared		= &dove_xor0_shared,
+	.hw_id		= 1,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device dove_xor01_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(dove_xor01_resources),
+	.resource	= dove_xor01_resources,
+	.dev		= {
+		.dma_mask		= &dove_xor0_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(64),
+		.platform_data		= (void *)&dove_xor01_data,
+	},
+};
+
+void __init dove_xor0_init(void)
+{
+	platform_device_register(&dove_xor0_shared);
+
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, dove_xor00_data.cap_mask);
+	dma_cap_set(DMA_XOR, dove_xor00_data.cap_mask);
+	platform_device_register(&dove_xor00_channel);
+
+	dma_cap_set(DMA_MEMCPY, dove_xor01_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, dove_xor01_data.cap_mask);
+	dma_cap_set(DMA_XOR, dove_xor01_data.cap_mask);
+	platform_device_register(&dove_xor01_channel);
+}
+
+/*****************************************************************************
+ * XOR 1
+ ****************************************************************************/
+static u64 dove_xor1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource dove_xor1_shared_resources[] = {
+	{
+		.name	= "xor 0 low",
+		.start	= DOVE_XOR1_PHYS_BASE,
+		.end	= DOVE_XOR1_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "xor 0 high",
+		.start	= DOVE_XOR1_HIGH_PHYS_BASE,
+		.end	= DOVE_XOR1_HIGH_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dove_xor1_shared = {
+	.name		= MV_XOR_SHARED_NAME,
+	.id		= 1,
+	.dev		= {
+		.platform_data = &dove_xor_shared_data,
+	},
+	.num_resources	= ARRAY_SIZE(dove_xor1_shared_resources),
+	.resource	= dove_xor1_shared_resources,
+};
+
+static struct resource dove_xor10_resources[] = {
+	[0] = {
+		.start	= IRQ_DOVE_XOR_10,
+		.end	= IRQ_DOVE_XOR_10,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data dove_xor10_data = {
+	.shared		= &dove_xor1_shared,
+	.hw_id		= 0,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device dove_xor10_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(dove_xor10_resources),
+	.resource	= dove_xor10_resources,
+	.dev		= {
+		.dma_mask		= &dove_xor1_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(64),
+		.platform_data		= (void *)&dove_xor10_data,
+	},
+};
+
+static struct resource dove_xor11_resources[] = {
+	[0] = {
+		.start	= IRQ_DOVE_XOR_11,
+		.end	= IRQ_DOVE_XOR_11,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data dove_xor11_data = {
+	.shared		= &dove_xor1_shared,
+	.hw_id		= 1,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device dove_xor11_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(dove_xor11_resources),
+	.resource	= dove_xor11_resources,
+	.dev		= {
+		.dma_mask		= &dove_xor1_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(64),
+		.platform_data		= (void *)&dove_xor11_data,
+	},
+};
+
+void __init dove_xor1_init(void)
+{
+	platform_device_register(&dove_xor1_shared);
+
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, dove_xor10_data.cap_mask);
+	dma_cap_set(DMA_XOR, dove_xor10_data.cap_mask);
+	platform_device_register(&dove_xor10_channel);
+
+	dma_cap_set(DMA_MEMCPY, dove_xor11_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, dove_xor11_data.cap_mask);
+	dma_cap_set(DMA_XOR, dove_xor11_data.cap_mask);
+	platform_device_register(&dove_xor11_channel);
+}
+
+void __init dove_init(void)
+{
+	int tclk;
+
+	tclk = get_tclk();
+
+	printk(KERN_INFO "Dove 88AP510 SoC, ");
+	printk(KERN_INFO "TCLK = %dMHz\n", (tclk + 499999) / 1000000);
+
+#ifdef CONFIG_CACHE_TAUROS2
+	tauros2_init();
+#endif
+	dove_setup_cpu_mbus();
+
+	dove_ge00_shared_data.t_clk = tclk;
+	dove_uart0_data[0].uartclk = tclk;
+	dove_uart1_data[0].uartclk = tclk;
+	dove_uart2_data[0].uartclk = tclk;
+	dove_uart3_data[0].uartclk = tclk;
+	dove_spi0_data.tclk = tclk;
+	dove_spi1_data.tclk = tclk;
+
+	/* internal devices that every board has */
+	dove_rtc_init();
+	dove_xor0_init();
+	dove_xor1_init();
+}

arch/arm/mach-dove/common.h

+/*
+ * arch/arm/mach-dove/common.h
+ *
+ * Core functions for Marvell Dove 88AP510 System On Chip
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_DOVE_COMMON_H
+#define __ARCH_DOVE_COMMON_H
+
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+
+extern struct sys_timer dove_timer;
+extern struct mbus_dram_target_info dove_mbus_dram_info;
+
+/*
+ * Basic Dove init functions used early by machine-setup.
+ */
+void dove_map_io(void);
+void dove_init(void);
+void dove_init_irq(void);
+void dove_setup_cpu_mbus(void);
+void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void dove_sata_init(struct mv_sata_platform_data *sata_data);
+void dove_pcie_init(int init_port0, int init_port1);
+void dove_ehci0_init(void);
+void dove_ehci1_init(void);
+void dove_uart0_init(void);
+void dove_uart1_init(void);
+void dove_uart2_init(void);
+void dove_uart3_init(void);
+void dove_spi0_init(void);
+void dove_spi1_init(void);
+void dove_i2c_init(void);
+
+#endif

arch/arm/mach-dove/dove-db-setup.c

+/*
+ * arch/arm/mach-dove/dove-db-setup.c
+ *
+ * Marvell DB-MV88AP510-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/pci.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/spi/flash.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/dove.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data dove_db_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static struct mv_sata_platform_data dove_db_sata_data = {
+	.n_ports        = 1,
+};
+
+/*****************************************************************************
+ * SPI Devices:
+ * 	SPI0: 4M Flash ST-M25P32-VMF6P
+ ****************************************************************************/
+static const struct flash_platform_data dove_db_spi_flash_data = {
+	.type		= "m25p64",
+};
+
+static struct spi_board_info __initdata dove_db_spi_flash_info[] = {
+	{
+		.modalias       = "m25p80",
+		.platform_data  = &dove_db_spi_flash_data,
+		.irq            = -1,
+		.max_speed_hz   = 20000000,
+		.bus_num        = 0,
+		.chip_select    = 0,
+	},
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+static int __init dove_db_pci_init(void)
+{
+	if (machine_is_dove_db())
+		dove_pcie_init(1, 1);
+
+	return 0;
+}
+
+subsys_initcall(dove_db_pci_init);
+
+/*****************************************************************************
+ * Board Init
+ ****************************************************************************/
+static void __init dove_db_init(void)
+{
+	/*
+	 * Basic Dove setup. Needs to be called early.
+	 */
+	dove_init();
+
+	dove_ge00_init(&dove_db_ge00_data);
+	dove_ehci0_init();
+	dove_ehci1_init();
+	dove_sata_init(&dove_db_sata_data);
+	dove_spi0_init();
+	dove_spi1_init();
+	dove_uart0_init();
+	dove_uart1_init();
+	dove_i2c_init();
+	spi_register_board_info(dove_db_spi_flash_info,
+				ARRAY_SIZE(dove_db_spi_flash_info));
+}
+
+MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
+	.phys_io	= DOVE_SB_REGS_PHYS_BASE,
+	.io_pg_offst	= ((DOVE_SB_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= dove_db_init,
+	.map_io		= dove_map_io,
+	.init_irq	= dove_init_irq,
+	.timer		= &dove_timer,
+MACHINE_END

arch/arm/mach-dove/include/mach/bridge-regs.h

+/*
+ * arch/arm/mach-dove/include/mach/bridge-regs.h
+ *
+ * Mbus-L to Mbus Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/dove.h>
+
+#define CPU_CONFIG		(BRIDGE_VIRT_BASE | 0x0000)
+
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define  CPU_CTRL_PCIE0_LINK	0x00000001
+#define  CPU_RESET		0x00000002
+#define  CPU_CTRL_PCIE1_LINK	0x00000008
+
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define  SOFT_RESET_OUT_EN	0x00000004
+
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define  SOFT_RESET		0x00000001
+
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define  BRIDGE_INT_TIMER0	0x0002
+#define  BRIDGE_INT_TIMER1	0x0004
+#define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
+
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF	0x0000
+#define IRQ_MASK_LOW_OFF	0x0004
+#define FIQ_MASK_LOW_OFF	0x0008
+#define ENDPOINT_MASK_LOW_OFF	0x000c
+#define IRQ_CAUSE_HIGH_OFF	0x0010
+#define IRQ_MASK_HIGH_OFF	0x0014
+#define FIQ_MASK_HIGH_OFF	0x0018
+#define ENDPOINT_MASK_HIGH_OFF	0x001c
+#define PCIE_INTERRUPT_MASK_OFF	0x0020
+
+#define IRQ_MASK_LOW		(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)
+#define FIQ_MASK_LOW		(IRQ_VIRT_BASE + FIQ_MASK_LOW_OFF)
+#define ENDPOINT_MASK_LOW	(IRQ_VIRT_BASE + ENDPOINT_MASK_LOW_OFF)
+#define IRQ_MASK_HIGH		(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)
+#define FIQ_MASK_HIGH		(IRQ_VIRT_BASE + FIQ_MASK_HIGH_OFF)
+#define ENDPOINT_MASK_HIGH	(IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF)
+#define PCIE_INTERRUPT_MASK	(IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF)
+
+#define POWER_MANAGEMENT	(BRIDGE_VIRT_BASE | 0x011c)
+
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+
+#endif

arch/arm/mach-dove/include/mach/debug-macro.S

+/*
+ * arch/arm/mach-dove/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/bridge-regs.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =DOVE_SB_REGS_PHYS_BASE
+	ldrne	\rx, =DOVE_SB_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>

arch/arm/mach-dove/include/mach/dove.h

+/*
+ * arch/arm/mach-dove/include/mach/dove.h
+ *
+ * Generic definitions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_DOVE_H
+#define __ASM_ARCH_DOVE_H
+
+#include <mach/vmalloc.h>
+
+/*
+ * Marvell Dove address maps.
+ *
+ * phys		virt		size
+ * c8000000	fdb00000	1M	Cryptographic SRAM
+ * e0000000	@runtime	128M	PCIe-0 Memory space
+ * e8000000	@runtime	128M	PCIe-1 Memory space
+ * f1000000	fde00000	8M	on-chip south-bridge registers
+ * f1800000	fe600000	8M	on-chip north-bridge registers
+ * f2000000	fee00000	1M	PCIe-0 I/O space
+ * f2100000	fef00000	1M	PCIe-1 I/O space
+ */
+
+#define DOVE_CESA_PHYS_BASE		0xc8000000
+#define DOVE_CESA_VIRT_BASE		0xfdb00000
+#define DOVE_CESA_SIZE			SZ_1M
+
+#define DOVE_PCIE0_MEM_PHYS_BASE	0xe0000000
+#define DOVE_PCIE0_MEM_SIZE		SZ_128M
+
+#define DOVE_PCIE1_MEM_PHYS_BASE	0xe8000000
+#define DOVE_PCIE1_MEM_SIZE		SZ_128M
+
+#define DOVE_BOOTROM_PHYS_BASE		0xf8000000
+#define DOVE_BOOTROM_SIZE		SZ_128M
+
+#define DOVE_SCRATCHPAD_PHYS_BASE	0xf0000000
+#define DOVE_SCRATCHPAD_VIRT_BASE	0xfdd00000
+#define DOVE_SCRATCHPAD_SIZE		SZ_1M
+
+#define DOVE_SB_REGS_PHYS_BASE		0xf1000000
+#define DOVE_SB_REGS_VIRT_BASE		0xfde00000
+#define DOVE_SB_REGS_SIZE		SZ_8M
+
+#define DOVE_NB_REGS_PHYS_BASE		0xf1800000
+#define DOVE_NB_REGS_VIRT_BASE		0xfe600000
+#define DOVE_NB_REGS_SIZE		SZ_8M
+
+#define DOVE_PCIE0_IO_PHYS_BASE		0xf2000000
+#define DOVE_PCIE0_IO_VIRT_BASE		0xfee00000
+#define DOVE_PCIE0_IO_BUS_BASE		0x00000000
+#define DOVE_PCIE0_IO_SIZE		SZ_1M
+
+#define DOVE_PCIE1_IO_PHYS_BASE		0xf2100000
+#define DOVE_PCIE1_IO_VIRT_BASE		0xfef00000
+#define DOVE_PCIE1_IO_BUS_BASE		0x00100000
+#define DOVE_PCIE1_IO_SIZE		SZ_1M
+
+/*
+ * Dove Core Registers Map
+ */
+
+/* SPI, I2C, UART */
+#define DOVE_I2C_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x11000)
+#define DOVE_UART0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12000)
+#define DOVE_UART0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12000)
+#define DOVE_UART1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12100)
+#define DOVE_UART1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12100)
+#define DOVE_UART2_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12200)
+#define DOVE_UART2_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12200)
+#define DOVE_UART3_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12300)
+#define DOVE_UART3_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12300)
+#define DOVE_SPI0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x10600)
+#define DOVE_SPI1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x14600)
+
+/* North-South Bridge */
+#define BRIDGE_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x20000)
+
+/* Cryptographic Engine */
+#define DOVE_CRYPT_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x30000)
+
+/* PCIe 0 */
+#define DOVE_PCIE0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x40000)
+
+/* USB */
+#define DOVE_USB0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x50000)
+#define DOVE_USB1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x51000)
+
+/* XOR 0 Engine */
+#define DOVE_XOR0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60800)
+#define DOVE_XOR0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60800)
+#define DOVE_XOR0_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60A00)
+#define DOVE_XOR0_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60A00)
+
+/* XOR 1 Engine */
+#define DOVE_XOR1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60900)
+#define DOVE_XOR1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60900)
+#define DOVE_XOR1_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60B00)
+#define DOVE_XOR1_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60B00)
+
+/* Gigabit Ethernet */
+#define DOVE_GE00_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x70000)
+
+/* PCIe 1 */
+#define DOVE_PCIE1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x80000)
+
+/* CAFE */
+#define DOVE_SDIO0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x92000)
+#define DOVE_SDIO1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x90000)
+#define DOVE_CAM_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x94000)
+#define DOVE_CAFE_WIN_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x98000)
+
+/* SATA */
+#define DOVE_SATA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xa0000)
+
+/* I2S/SPDIF */
+#define DOVE_AUD0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xb0000)
+#define DOVE_AUD1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xb4000)
+
+/* NAND Flash Controller */
+#define DOVE_NFC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xc0000)
+
+/* MPP, GPIO, Reset Sampling */
+#define DOVE_MPP_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
+#define DOVE_RESET_SAMPLE_LO	(DOVE_MPP_VIRT_BASE | 0x014)
+#define DOVE_RESET_SAMPLE_HI	(DOVE_MPP_VIRT_BASE | 0x018)
+#define DOVE_GPIO_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define  DOVE_AU1_SPDIFO_GPIO_EN	(1 << 1)
+#define  DOVE_NAND_GPIO_EN		(1 << 0)
+#define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_VIRT_BASE + 0x40)
+
+
+/* Power Management */
+#define DOVE_PMU_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0000)
+
+/* Real Time Clock */
+#define DOVE_RTC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xd8500)
+
+/* AC97 */
+#define DOVE_AC97_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xe0000)
+#define DOVE_AC97_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe0000)
+
+/* Peripheral DMA */
+#define DOVE_PDMA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xe4000)
+#define DOVE_PDMA_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe4000)
+
+#define DOVE_GLOBAL_CONFIG_1	(DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define  DOVE_TWSI_ENABLE_OPTION1	(1 << 7)
+#define DOVE_GLOBAL_CONFIG_2	(DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define  DOVE_TWSI_ENABLE_OPTION2	(1 << 20)
+#define  DOVE_TWSI_ENABLE_OPTION3	(1 << 21)
+#define  DOVE_TWSI_OPTION3_GPIO		(1 << 22)
+#define DOVE_SSP_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xec000)
+#define DOVE_SSP_CTRL_STATUS_1	(DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define  DOVE_SSP_ON_AU1		(1 << 0)
+#define  DOVE_SSP_CLOCK_ENABLE		(1 << 1)
+#define  DOVE_SSP_BPB_CLOCK_SRC_SSP	(1 << 11)
+/* Memory Controller */
+#define DOVE_MC_VIRT_BASE	(DOVE_NB_REGS_VIRT_BASE | 0x00000)
+
+/* LCD Controller */
+#define DOVE_LCD_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x10000)
+#define DOVE_LCD1_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x20000)
+#define DOVE_LCD2_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x10000)
+#define DOVE_LCD_DCON_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x30000)
+
+/* Graphic Engine */
+#define DOVE_GPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x40000)
+
+/* Video Engine */
+#define DOVE_VPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x400000)
+
+#endif

arch/arm/mach-dove/include/mach/entry-macro.S

+/*
+ * arch/arm/mach-dove/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Dove platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/bridge-regs.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IRQ_VIRT_BASE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ check low interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
+	mov	\irqnr, #31
+	ands	\irqstat, \irqstat, \tmp
+
+	@ if no low interrupts set, check high interrupts
+	ldreq	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+	ldreq	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
+	moveq	\irqnr, #63
+	andeqs	\irqstat, \irqstat, \tmp
+
+	@ find first active interrupt source
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm

arch/arm/mach-dove/include/mach/gpio.h

+/*
+ * arch/arm/mach-dove/include/mach/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm/errno.h>
+#include <mach/irqs.h>
+#include <plat/gpio.h>
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+#define GPIO_MAX	64
+
+#define GPIO_BASE_LO		(DOVE_GPIO_VIRT_BASE + 0x00)
+#define GPIO_BASE_HI		(DOVE_GPIO_VIRT_BASE + 0x20)
+
+#define GPIO_BASE(pin)		((pin < 32) ? GPIO_BASE_LO : GPIO_BASE_HI)
+
+#define GPIO_OUT(pin)		(GPIO_BASE(pin) + 0x00)
+#define GPIO_IO_CONF(pin)	(GPIO_BASE(pin) + 0x04)
+#define GPIO_BLINK_EN(pin)	(GPIO_BASE(pin) + 0x08)
+#define GPIO_IN_POL(pin)	(GPIO_BASE(pin) + 0x0c)
+#define GPIO_DATA_IN(pin)	(GPIO_BASE(pin) + 0x10)
+#define GPIO_EDGE_CAUSE(pin)	(GPIO_BASE(pin) + 0x14)
+#define GPIO_EDGE_MASK(pin)	(GPIO_BASE(pin) + 0x18)
+#define GPIO_LEVEL_MASK(pin)	(GPIO_BASE(pin) + 0x1c)
+
+static inline int gpio_to_irq(int pin)
+{
+	if (pin < NR_GPIO_IRQS)
+		return pin + IRQ_DOVE_GPIO_START;
+
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(int irq)
+{
+	if (IRQ_DOVE_GPIO_START < irq && irq < NR_IRQS)
+		return irq - IRQ_DOVE_GPIO_START;
+
+	return -EINVAL;
+}
+
+#endif

arch/arm/mach-dove/include/mach/hardware.h

+/*
+ * arch/arm/mach-dove/include/mach/hardware.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "dove.h"
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO			0x1000
+#define PCIBIOS_MIN_MEM			0x01000000
+#define PCIMEM_BASE			DOVE_PCIE0_MEM_PHYS_BASE
+
+
+/* Macros below are required for compatibility with PXA AC'97 driver.	*/
+#define __REG(x)	(*((volatile u32 *)((x) - DOVE_SB_REGS_PHYS_BASE + \
+				DOVE_SB_REGS_VIRT_BASE)))
+#define __PREG(x)	(((u32)&(x)) - DOVE_SB_REGS_VIRT_BASE + \
+		DOVE_SB_REGS_PHYS_BASE)
+#endif

arch/arm/mach-dove/include/mach/io.h

+/*
+ * arch/arm/mach-dove/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "dove.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+#define __io(a)  ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\
+				   DOVE_PCIE0_IO_VIRT_BASE))
+#define __mem_pci(a)		(a)
+
+#endif

arch/arm/mach-dove/include/mach/irqs.h

+/*
+ * arch/arm/mach-dove/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/*
+ * Dove Low Interrupt Controller
+ */
+#define IRQ_DOVE_BRIDGE		0
+#define IRQ_DOVE_H2C		1
+#define IRQ_DOVE_C2H		2
+#define IRQ_DOVE_NAND		3
+#define IRQ_DOVE_PDMA		4
+#define IRQ_DOVE_SPI1		5
+#define IRQ_DOVE_SPI0		6
+#define IRQ_DOVE_UART_0		7
+#define IRQ_DOVE_UART_1		8
+#define IRQ_DOVE_UART_2		9
+#define IRQ_DOVE_UART_3		10
+#define IRQ_DOVE_I2C		11
+#define IRQ_DOVE_GPIO_0_7	12
+#define IRQ_DOVE_GPIO_8_15	13
+#define IRQ_DOVE_GPIO_16_23	14
+#define IRQ_DOVE_PCIE0_ERR	15
+#define IRQ_DOVE_PCIE0		16
+#define IRQ_DOVE_PCIE1_ERR	17
+#define IRQ_DOVE_PCIE1		18
+#define IRQ_DOVE_I2S0		19
+#define IRQ_DOVE_I2S0_ERR	20
+#define IRQ_DOVE_I2S1		21
+#define IRQ_DOVE_I2S1_ERR	22
+#define IRQ_DOVE_USB_ERR	23
+#define IRQ_DOVE_USB0		24
+#define IRQ_DOVE_USB1		25
+#define IRQ_DOVE_GE00_RX	26
+#define IRQ_DOVE_GE00_TX	27
+#define IRQ_DOVE_GE00_MISC	28
+#define IRQ_DOVE_GE00_SUM	29
+#define IRQ_DOVE_GE00_ERR	30
+#define IRQ_DOVE_CRYPTO		31
+
+/*
+ * Dove High Interrupt Controller
+ */
+#define IRQ_DOVE_AC97		32
+#define IRQ_DOVE_PMU		33
+#define IRQ_DOVE_CAM		34
+#define IRQ_DOVE_SDIO0		35
+#define IRQ_DOVE_SDIO1		36
+#define IRQ_DOVE_SDIO0_WAKEUP	37
+#define IRQ_DOVE_SDIO1_WAKEUP	38
+#define IRQ_DOVE_XOR_00		39
+#define IRQ_DOVE_XOR_01		40
+#define IRQ_DOVE_XOR0_ERR	41
+#define IRQ_DOVE_XOR_10		42
+#define IRQ_DOVE_XOR_11		43
+#define IRQ_DOVE_XOR1_ERR	44
+#define IRQ_DOVE_LCD_DCON	45
+#define IRQ_DOVE_LCD1		46
+#define IRQ_DOVE_LCD0		47
+#define IRQ_DOVE_GPU		48
+#define IRQ_DOVE_PERFORM_MNTR	49
+#define IRQ_DOVE_VPRO_DMA1	51
+#define IRQ_DOVE_SSP_TIMER	54
+#define IRQ_DOVE_SSP		55
+#define IRQ_DOVE_MC_L2_ERR	56
+#define IRQ_DOVE_CRYPTO_ERR	59
+#define IRQ_DOVE_GPIO_24_31	60
+#define IRQ_DOVE_HIGH_GPIO	61
+#define IRQ_DOVE_SATA		62
+
+/*
+ * DOVE General Purpose Pins
+ */
+#define IRQ_DOVE_GPIO_START	64
+#define NR_GPIO_IRQS		64
+
+/*
+ * PMU interrupts
+ */
+#define IRQ_DOVE_PMU_START	(IRQ_DOVE_GPIO_START + NR_GPIO_IRQS)
+#define NR_PMU_IRQS		7
+#define IRQ_DOVE_RTC		(IRQ_DOVE_PMU_START + 5)
+
+#define NR_IRQS			(IRQ_DOVE_PMU_START + NR_PMU_IRQS)
+
+/* Required for compatability with PXA AC97 driver.	*/
+#define IRQ_AC97		IRQ_DOVE_AC97
+/* Required for compatability with PXA DMA driver.	*/
+#define IRQ_DMA			IRQ_DOVE_PDMA
+/* Required for compatability with PXA NAND driver 	*/
+#define IRQ_NAND		IRQ_DOVE_NAND
+#endif

arch/arm/mach-dove/include/mach/memory.h

+/*
+ * arch/arm/mach-dove/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#endif

arch/arm/mach-dove/include/mach/pm.h

+/*
+ * arch/arm/mach-dove/include/mach/pm.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_PM_H
+#define __ASM_ARCH_PM_H
+
+#include <asm/errno.h>
+#include <mach/irqs.h>
+
+#define CLOCK_GATING_CONTROL	(DOVE_PMU_VIRT_BASE + 0x38)
+#define  CLOCK_GATING_USB0_MASK		(1 << 0)
+#define  CLOCK_GATING_USB1_MASK		(1 << 1)
+#define  CLOCK_GATING_GBE_MASK		(1 << 2)
+#define  CLOCK_GATING_SATA_MASK		(1 << 3)
+#define  CLOCK_GATING_PCIE0_MASK	(1 << 4)
+#define  CLOCK_GATING_PCIE1_MASK	(1 << 5)
+#define  CLOCK_GATING_SDIO0_MASK	(1 << 8)
+#define  CLOCK_GATING_SDIO1_MASK	(1 << 9)
+#define  CLOCK_GATING_NAND_MASK		(1 << 10)
+#define  CLOCK_GATING_CAMERA_MASK	(1 << 11)
+#define  CLOCK_GATING_I2S0_MASK		(1 << 12)
+#define  CLOCK_GATING_I2S1_MASK		(1 << 13)
+#define  CLOCK_GATING_CRYPTO_MASK	(1 << 15)
+#define  CLOCK_GATING_AC97_MASK		(1 << 21)
+#define  CLOCK_GATING_PDMA_MASK		(1 << 22)
+#define  CLOCK_GATING_XOR0_MASK		(1 << 23)
+#define  CLOCK_GATING_XOR1_MASK		(1 << 24)
+#define  CLOCK_GATING_GIGA_PHY_MASK	(1 << 30)
+
+#define PMU_INTERRUPT_CAUSE	(DOVE_PMU_VIRT_BASE + 0x50)
+#define PMU_INTERRUPT_MASK	(DOVE_PMU_VIRT_BASE + 0x54)
+
+static inline int pmu_to_irq(int pin)
+{
+	if (pin < NR_PMU_IRQS)
+		return pin + IRQ_DOVE_PMU_START;
+
+	return -EINVAL;
+}
+
+static inline int irq_to_pmu(int irq)
+{
+	if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS)
+		return irq - IRQ_DOVE_PMU_START;
+
+	return -EINVAL;
+}
+
+#endif

arch/arm/mach-dove/include/mach/system.h

+/*
+ * arch/arm/mach-dove/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/bridge-regs.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
+
+
+#endif

arch/arm/mach-dove/include/mach/timex.h

+/*
+ * arch/arm/mach-dove/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)

arch/arm/mach-dove/include/mach/uncompress.h

+/*
+ * arch/arm/mach-dove/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/dove.h>
+
+#define UART_THR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x0))
+#define UART_LSR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x14))
+
+#define LSR_THRE	0x20
+
+static void putc(const char c)
+{
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		/* Transmit fifo not full? */
+		if (*UART_LSR & LSR_THRE)
+			break;
+	}
+
+	*UART_THR = c;
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()

arch/arm/mach-dove/include/mach/vmalloc.h

+/*
+ * arch/arm/mach-dove/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfd800000

arch/arm/mach-dove/irq.c

+/*
+ * arch/arm/mach-dove/irq.c
+ *
+ * Dove IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <asm/mach/arch.h>
+#include <plat/irq.h>
+#include <asm/mach/irq.h>
+#include <mach/pm.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	int irqoff;
+	BUG_ON(irq < IRQ_DOVE_GPIO_0_7 || irq > IRQ_DOVE_HIGH_GPIO);
+
+	irqoff = irq <= IRQ_DOVE_GPIO_16_23 ? irq - IRQ_DOVE_GPIO_0_7 :
+		3 + irq - IRQ_DOVE_GPIO_24_31;
+
+	orion_gpio_irq_handler(irqoff << 3);
+	if (irq == IRQ_DOVE_HIGH_GPIO) {
+		orion_gpio_irq_handler(40);
+		orion_gpio_irq_handler(48);
+		orion_gpio_irq_handler(56);
+	}
+}
+
+static void pmu_irq_mask(unsigned int irq)
+{
+	int pin = irq_to_pmu(irq);
+	u32 u;
+
+	u = readl(PMU_INTERRUPT_MASK);
+	u &= ~(1 << (pin & 31));
+	writel(u, PMU_INTERRUPT_MASK);
+}
+
+static void pmu_irq_unmask(unsigned int irq)
+{
+	int pin = irq_to_pmu(irq);
+	u32 u;
+
+	u = readl(PMU_INTERRUPT_MASK);
+	u |= 1 << (pin & 31);
+	writel(u, PMU_INTERRUPT_MASK);
+}
+
+static void pmu_irq_ack(unsigned int irq)
+{
+	int pin = irq_to_pmu(irq);
+	u32 u;
+
+	u = ~(1 << (pin & 31));
+	writel(u, PMU_INTERRUPT_CAUSE);
+}
+
+static struct irq_chip pmu_irq_chip = {
+	.name		= "pmu_irq",
+	.mask		= pmu_irq_mask,
+	.unmask		= pmu_irq_unmask,
+	.ack		= pmu_irq_ack,
+};
+
+static void pmu_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long cause = readl(PMU_INTERRUPT_CAUSE);
+
+	cause &= readl(PMU_INTERRUPT_MASK);
+	if (cause == 0) {
+		do_bad_IRQ(irq, desc);
+		return;
+	}
+
+	for (irq = 0; irq < NR_PMU_IRQS; irq++) {
+		if (!(cause & (1 << irq)))
+			continue;
+		irq = pmu_to_irq(irq);
+		desc = irq_desc + irq;
+		desc_handle_irq(irq, desc);
+	}
+}
+
+void __init dove_init_irq(void)
+{
+	int i;
+
+	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
+	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+
+	/*
+	 * Mask and clear GPIO IRQ interrupts.
+	 */
+	writel(0, GPIO_LEVEL_MASK(0));
+	writel(0, GPIO_EDGE_MASK(0));
+	writel(0, GPIO_EDGE_CAUSE(0));
+
+	/*
+	 * Mask and clear PMU interrupts
+	 */
+	writel(0, PMU_INTERRUPT_MASK);
+	writel(0, PMU_INTERRUPT_CAUSE);
+
+	for (i = IRQ_DOVE_GPIO_START; i < IRQ_DOVE_PMU_START; i++) {
+		set_irq_chip(i, &orion_gpio_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		irq_desc[i].status |= IRQ_LEVEL;
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler);
+
+	for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) {
+		set_irq_chip(i, &pmu_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		irq_desc[i].status |= IRQ_LEVEL;
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler);
+}

arch/arm/mach-dove/pcie.c

+/*
+ * arch/arm/mach-dove/pcie.c
+ *
+ * PCIe functions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mbus.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+#include <asm/delay.h>
+#include <plat/pcie.h>
+#include <mach/irqs.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+struct pcie_port {
+	u8			index;
+	u8			root_bus_nr;
+	void __iomem		*base;
+	spinlock_t		conf_lock;
+	char			io_space_name[16];
+	char			mem_space_name[16];
+	struct resource		res[2];
+};
+
+static struct pcie_port pcie_port[2];
+static int num_pcie_ports;
+
+
+static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+	struct pcie_port *pp;
+
+	if (nr >= num_pcie_ports)
+		return 0;
+
+	pp = &pcie_port[nr];
+	pp->root_bus_nr = sys->busnr;
+
+	/*
+	 * Generic PCIe unit setup.
+	 */
+	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
+
+	orion_pcie_setup(pp->base, &dove_mbus_dram_info);
+
+	/*
+	 * IORESOURCE_IO
+	 */
+	snprintf(pp->io_space_name, sizeof(pp->io_space_name),
+		 "PCIe %d I/O", pp->index);
+	pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
+	pp->res[0].name = pp->io_space_name;
+	if (pp->index == 0) {
+		pp->res[0].start = DOVE_PCIE0_IO_PHYS_BASE;
+		pp->res[0].end = pp->res[0].start + DOVE_PCIE0_IO_SIZE - 1;
+	} else {
+		pp->res[0].start = DOVE_PCIE1_IO_PHYS_BASE;
+		pp->res[0].end = pp->res[0].start + DOVE_PCIE1_IO_SIZE - 1;
+	}
+	pp->res[0].flags = IORESOURCE_IO;
+	if (request_resource(&ioport_resource, &pp->res[0]))
+		panic("Request PCIe IO resource failed\n");
+	sys->resource[0] = &pp->res[0];
+
+	/*
+	 * IORESOURCE_MEM
+	 */
+	snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
+		 "PCIe %d MEM", pp->index);
+	pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
+	pp->res[1].name = pp->mem_space_name;
+	if (pp->index == 0) {
+		pp->res[1].start = DOVE_PCIE0_MEM_PHYS_BASE;
+		pp->res[1].end = pp->res[1].start + DOVE_PCIE0_MEM_SIZE - 1;
+	} else {
+		pp->res[1].start = DOVE_PCIE1_MEM_PHYS_BASE;
+		pp->res[1].end = pp->res[1].start + DOVE_PCIE1_MEM_SIZE - 1;
+	}
+	pp->res[1].flags = IORESOURCE_MEM;
+	if (request_resource(&iomem_resource, &pp->res[1]))
+		panic("Request PCIe Memory resource failed\n");
+	sys->resource[1] = &pp->res[1];
+
+	sys->resource[2] = NULL;
+
+	return 1;
+}
+
+static struct pcie_port *bus_to_port(int bus)
+{
+	int i;
+
+	for (i = num_pcie_ports - 1; i >= 0; i--) {
+		int rbus = pcie_port[i].root_bus_nr;
+		if (rbus != -1 && rbus <= bus)
+			break;
+	}
+
+	return i >= 0 ? pcie_port + i : NULL;
+}
+
+static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
+{
+	/*
+	 * Don't go out when trying to access nonexisting devices
+	 * on the local bus.
+	 */
+	if (bus == pp->root_bus_nr && dev > 1)
+		return 0;
+
+	return 1;
+}
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+			int size, u32 *val)
+{
+	struct pcie_port *pp = bus_to_port(bus->number);
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+	return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+			int where, int size, u32 val)
+{
+	struct pcie_port *pp = bus_to_port(bus->number);
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+	return ret;
+}
+
+static struct pci_ops pcie_ops = {
+	.read = pcie_rd_conf,
+	.write = pcie_wr_conf,
+};
+
+static void __devinit rc_pci_fixup(struct pci_dev *dev)
+{
+	/*
+	 * Prevent enumeration of root complex.
+	 */
+	if (dev->bus->parent == NULL && dev->devfn == 0) {
+		int i;
+
+		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+			dev->resource[i].start = 0;
+			dev->resource[i].end   = 0;
+			dev->resource[i].flags = 0;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+static struct pci_bus __init *
+dove_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	struct pci_bus *bus;
+
+	if (nr < num_pcie_ports) {
+		bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
+	} else {
+		bus = NULL;
+		BUG();
+	}
+
+	return bus;
+}
+
+static int __init dove_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct pcie_port *pp = bus_to_port(dev->bus->number);
+
+	return pp->index ? IRQ_DOVE_PCIE1 : IRQ_DOVE_PCIE0;
+}
+
+static struct hw_pci dove_pci __initdata = {
+	.nr_controllers	= 2,
+	.swizzle	= pci_std_swizzle,
+	.setup		= dove_pcie_setup,
+	.scan		= dove_pcie_scan_bus,
+	.map_irq	= dove_pcie_map_irq,
+};
+
+static void __init add_pcie_port(int index, unsigned long base)
+{
+	printk(KERN_INFO "Dove PCIe port %d: ", index);
+
+	if (orion_pcie_link_up((void __iomem *)base)) {
+		struct pcie_port *pp = &pcie_port[num_pcie_ports++];
+
+		printk(KERN_INFO "link up\n");
+
+		pp->index = index;
+		pp->root_bus_nr = -1;
+		pp->base = (void __iomem *)base;
+		spin_lock_init(&pp->conf_lock);
+		memset(pp->res, 0, sizeof(pp->res));
+	} else {
+		printk(KERN_INFO "link down, ignoring\n");
+	}
+}
+
+void __init dove_pcie_init(int init_port0, int init_port1)
+{
+	if (init_port0)
+		add_pcie_port(0, DOVE_PCIE0_VIRT_BASE);
+
+	if (init_port1)
+		add_pcie_port(1, DOVE_PCIE1_VIRT_BASE);
+
+	pci_common_init(&dove_pci);
+}

arch/arm/mach-kirkwood/Kconfig

@@ -33,10 +33,18 @@ config MACH_SHEEVAPLUG
 	  Marvell SheevaPlug Reference Board.
 
 config MACH_TS219
-	bool "QNAP TS-119 and TS-219 Turbo NAS"
+	bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  QNAP TS-119 and TS-219 Turbo NAS devices.
+	  QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS
+	  devices.
+
+config MACH_TS41X
+	bool "QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
+	  devices.
 
 config MACH_OPENRD_BASE
 	bool "Marvell OpenRD Base Board"

arch/arm/mach-kirkwood/Makefile

@@ -5,7 +5,8 @@ obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
 obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
-obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o
+obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
+obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_OPENRD_BASE)		+= openrd_base-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o

arch/arm/mach-kirkwood/ts219-setup.c

 /*
  *
- * QNAP TS-119/TS-219 Turbo NAS Board Setup
+ * QNAP TS-11x/TS-21x Turbo NAS Board Setup
  *
  * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
  * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
@@ -14,87 +14,17 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/i2c.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
-#include <linux/timex.h>
-#include <linux/serial_reg.h>
-#include <linux/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include "common.h"
 #include "mpp.h"
-
-/****************************************************************************
- * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
- *     partitions on the device because we want to keep compatability with
- *     the QNAP firmware.
- * Layout as used by QNAP:
- *  0x00000000-0x00080000 : "U-Boot"
- *  0x00200000-0x00400000 : "Kernel"
- *  0x00400000-0x00d00000 : "RootFS"
- *  0x00d00000-0x01000000 : "RootFS2"
- *  0x00080000-0x000c0000 : "U-Boot Config"
- *  0x000c0000-0x00200000 : "NAS Config"
- *
- * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
- * used by the QNAP TS-109/TS-209.
- *
- ***************************************************************************/
-
-static struct mtd_partition qnap_ts219_partitions[] = {
-	{
-		.name		= "U-Boot",
-		.size		= 0x00080000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "Kernel",
-		.size		= 0x00200000,
-		.offset		= 0x00200000,
-	}, {
-		.name		= "RootFS1",
-		.size		= 0x00900000,
-		.offset		= 0x00400000,
-	}, {
-		.name		= "RootFS2",
-		.size		= 0x00300000,
-		.offset		= 0x00d00000,
-	}, {
-		.name		= "U-Boot Config",
-		.size		= 0x00040000,
-		.offset		= 0x00080000,
-	}, {
-		.name		= "NAS Config",
-		.size		= 0x00140000,
-		.offset		= 0x000c0000,
-	},
-};
-
-static const struct flash_platform_data qnap_ts219_flash = {
-	.type		= "m25p128",
-	.name		= "spi_flash",
-	.parts		= qnap_ts219_partitions,
-	.nr_parts	= ARRAY_SIZE(qnap_ts219_partitions),
-};
-
-static struct spi_board_info __initdata qnap_ts219_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &qnap_ts219_flash,
-		.irq		= -1,
-		.max_speed_hz	= 20000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
+#include "tsx1x-common.h"
 
 static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
 	I2C_BOARD_INFO("s35390a", 0x30),
@@ -152,36 +82,10 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
 	MPP14_UART1_RXD,	/* PIC controller */
 	MPP15_GPIO,		/* USB Copy button */
 	MPP16_GPIO,		/* Reset button */
+	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
 	0
 };
 
-
-/*****************************************************************************
- * QNAP TS-x19 specific power off method via UART1-attached PIC
- ****************************************************************************/
-
-#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
-
-void qnap_ts219_power_off(void)
-{
-	/* 19200 baud divisor */
-	const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
-
-	pr_info("%s: triggering power-off...\n", __func__);
-
-	/* hijack UART1 and reset into sane state (19200,8n1) */
-	writel(0x83, UART1_REG(LCR));
-	writel(divisor & 0xff, UART1_REG(DLL));
-	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
-	writel(0x03, UART1_REG(LCR));
-	writel(0x00, UART1_REG(IER));
-	writel(0x00, UART1_REG(FCR));
-	writel(0x00, UART1_REG(MCR));
-
-	/* send the power-off command 'A' to PIC */
-	writel('A', UART1_REG(TX));
-}
-
 static void __init qnap_ts219_init(void)
 {
 	/*
@@ -192,9 +96,7 @@ static void __init qnap_ts219_init(void)
 
 	kirkwood_uart0_init();
 	kirkwood_uart1_init(); /* A PIC controller is connected here. */
-	spi_register_board_info(qnap_ts219_spi_slave_info,
-				ARRAY_SIZE(qnap_ts219_spi_slave_info));
-	kirkwood_spi_init();
+	qnap_tsx1x_register_flash();
 	kirkwood_i2c_init();
 	i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
 	kirkwood_ge00_init(&qnap_ts219_ge00_data);
@@ -202,7 +104,7 @@ static void __init qnap_ts219_init(void)
 	kirkwood_ehci_init();
 	platform_device_register(&qnap_ts219_button_device);
 
-	pm_power_off = qnap_ts219_power_off;
+	pm_power_off = qnap_tsx1x_power_off;
 
 }
 

arch/arm/mach-kirkwood/ts41x-setup.c

+/*
+ *
+ * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup
+ *
+ * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+#include "tsx1x-common.h"
+
+static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts41x_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts41x_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data qnap_ts41x_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct gpio_keys_button qnap_ts41x_buttons[] = {
+	{
+		.code		= KEY_COPY,
+		.gpio		= 43,
+		.desc		= "USB Copy",
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 37,
+		.desc		= "Reset",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data qnap_ts41x_button_data = {
+	.buttons	= qnap_ts41x_buttons,
+	.nbuttons	= ARRAY_SIZE(qnap_ts41x_buttons),
+};
+
+static struct platform_device qnap_ts41x_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &qnap_ts41x_button_data,
+	}
+};
+
+static unsigned int qnap_ts41x_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP6_SYSRST_OUTn,
+	MPP7_PEX_RST_OUTn,
+	MPP8_TW_SDA,
+	MPP9_TW_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP13_UART1_TXD,	/* PIC controller */
+	MPP14_UART1_RXD,	/* PIC controller */
+	MPP15_SATA0_ACTn,
+	MPP16_SATA1_ACTn,
+	MPP20_GE1_0,
+	MPP21_GE1_1,
+	MPP22_GE1_2,
+	MPP23_GE1_3,
+	MPP24_GE1_4,
+	MPP25_GE1_5,
+	MPP26_GE1_6,
+	MPP27_GE1_7,
+	MPP30_GE1_10,
+	MPP31_GE1_11,
+	MPP32_GE1_12,
+	MPP33_GE1_13,
+	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
+	MPP37_GPIO,		/* Reset button */
+	MPP43_GPIO,		/* USB Copy button */
+	MPP44_GPIO,		/* Board ID: 0: TS-419U, 1: TS-419 */
+	MPP45_GPIO,		/* JP1: 0: console, 1: LCD */
+	MPP46_GPIO,		/* External SATA HDD1 error indicator */
+	MPP47_GPIO,		/* External SATA HDD2 error indicator */
+	MPP48_GPIO,		/* External SATA HDD3 error indicator */
+	MPP49_GPIO,		/* External SATA HDD4 error indicator */
+	0
+};
+
+static void __init qnap_ts41x_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(qnap_ts41x_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_uart1_init(); /* A PIC controller is connected here. */
+	qnap_tsx1x_register_flash();
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1);
+	kirkwood_ge00_init(&qnap_ts41x_ge00_data);
+	kirkwood_ge01_init(&qnap_ts41x_ge01_data);
+	kirkwood_sata_init(&qnap_ts41x_sata_data);
+	kirkwood_ehci_init();
+	platform_device_register(&qnap_ts41x_button_device);
+
+	pm_power_off = qnap_tsx1x_power_off;
+
+}
+
+static int __init ts41x_pci_init(void)
+{
+	if (machine_is_ts41x())
+		kirkwood_pcie_init();
+
+   return 0;
+}
+subsys_initcall(ts41x_pci_init);
+
+MACHINE_START(TS41X, "QNAP TS-41x")
+	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= qnap_ts41x_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END

arch/arm/mach-kirkwood/tsx1x-common.c

+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/serial_reg.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+
+/*
+ * QNAP TS-x1x Boards flash
+ */
+
+/****************************************************************************
+ * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
+ *     partitions on the device because we want to keep compatability with
+ *     the QNAP firmware.
+ * Layout as used by QNAP:
+ *  0x00000000-0x00080000 : "U-Boot"
+ *  0x00200000-0x00400000 : "Kernel"
+ *  0x00400000-0x00d00000 : "RootFS"
+ *  0x00d00000-0x01000000 : "RootFS2"
+ *  0x00080000-0x000c0000 : "U-Boot Config"
+ *  0x000c0000-0x00200000 : "NAS Config"
+ *
+ * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
+ * used by the QNAP TS-109/TS-209.
+ *
+ ***************************************************************************/
+
+struct mtd_partition qnap_tsx1x_partitions[] = {
+	{
+		.name		= "U-Boot",
+		.size		= 0x00080000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.size		= 0x00200000,
+		.offset		= 0x00200000,
+	}, {
+		.name		= "RootFS1",
+		.size		= 0x00900000,
+		.offset		= 0x00400000,
+	}, {
+		.name		= "RootFS2",
+		.size		= 0x00300000,
+		.offset		= 0x00d00000,
+	}, {
+		.name		= "U-Boot Config",
+		.size		= 0x00040000,
+		.offset		= 0x00080000,
+	}, {
+		.name		= "NAS Config",
+		.size		= 0x00140000,
+		.offset		= 0x000c0000,
+	},
+};
+
+const struct flash_platform_data qnap_tsx1x_flash = {
+	.type		= "m25p128",
+	.name		= "spi_flash",
+	.parts		= qnap_tsx1x_partitions,
+	.nr_parts	= ARRAY_SIZE(qnap_tsx1x_partitions),
+};
+
+struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &qnap_tsx1x_flash,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+void qnap_tsx1x_register_flash(void)
+{
+	spi_register_board_info(qnap_tsx1x_spi_slave_info,
+				ARRAY_SIZE(qnap_tsx1x_spi_slave_info));
+	kirkwood_spi_init();
+}
+
+
+/*****************************************************************************
+ * QNAP TS-x1x specific power off method via UART1-attached PIC
+ ****************************************************************************/
+
+#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
+
+void qnap_tsx1x_power_off(void)
+{
+	/* 19200 baud divisor */
+	const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
+
+	pr_info("%s: triggering power-off...\n", __func__);
+
+	/* hijack UART1 and reset into sane state (19200,8n1) */
+	writel(0x83, UART1_REG(LCR));
+	writel(divisor & 0xff, UART1_REG(DLL));
+	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+	writel(0x03, UART1_REG(LCR));
+	writel(0x00, UART1_REG(IER));
+	writel(0x00, UART1_REG(FCR));
+	writel(0x00, UART1_REG(MCR));
+
+	/* send the power-off command 'A' to PIC */
+	writel('A', UART1_REG(TX));
+}
+

arch/arm/mach-kirkwood/tsx1x-common.h

+#ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
+#define __ARCH_KIRKWOOD_TSX1X_COMMON_H
+
+extern void qnap_tsx1x_register_flash(void);
+extern void qnap_tsx1x_power_off(void);
+
+#endif

arch/arm/mm/Kconfig

@@ -388,7 +388,7 @@ config CPU_FEROCEON_OLD_ID
 
 # ARMv6
 config CPU_V6
-	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
+	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE
 	select CPU_32v6
 	select CPU_ABRT_EV6
 	select CPU_PABRT_V6
@@ -764,6 +764,15 @@ config CACHE_L2X0
 	help
 	  This option enables the L2x0 PrimeCell.
 
+config CACHE_TAUROS2
+	bool "Enable the Tauros2 L2 cache controller"
+	depends on ARCH_DOVE
+	default y
+	select OUTER_CACHE
+	help
+	  This option enables the Tauros2 L2 cache controller (as
+	  found on PJ1/PJ4).
+
 config CACHE_XSC3L2
 	bool "Enable the L2 cache on XScale3"
 	depends on CPU_XSC3

arch/arm/mm/Makefile

@@ -87,4 +87,4 @@ obj-$(CONFIG_CPU_V7)		+= proc-v7.o
 obj-$(CONFIG_CACHE_FEROCEON_L2)	+= cache-feroceon-l2.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
 obj-$(CONFIG_CACHE_XSC3L2)	+= cache-xsc3l2.o
-
+obj-$(CONFIG_CACHE_TAUROS2)	+= cache-tauros2.o

arch/arm/mm/cache-tauros2.c

+/*
+ * arch/arm/mm/cache-tauros2.c - Tauros2 L2 cache controller support
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * References:
+ * - PJ1 CPU Core Datasheet,
+ *   Document ID MV-S104837-01, Rev 0.7, January 24 2008.
+ * - PJ4 CPU Core Datasheet,
+ *   Document ID MV-S105190-00, Rev 0.7, March 14 2008.
+ */
+
+#include <linux/init.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-tauros2.h>
+
+
+/*
+ * When Tauros2 is used on a CPU that supports the v7 hierarchical
+ * cache operations, the cache handling code in proc-v7.S takes care
+ * of everything, including handling DMA coherency.
+ *
+ * So, we only need to register outer cache operations here if we're
+ * being used on a pre-v7 CPU, and we only need to build support for
+ * outer cache operations into the kernel image if the kernel has been
+ * configured to support a pre-v7 CPU.
+ */
+#if __LINUX_ARM_ARCH__ < 7
+/*
+ * Low-level cache maintenance operations.
+ */
+static inline void tauros2_clean_pa(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c7, c11, 3" : : "r" (addr));
+}
+
+static inline void tauros2_clean_inv_pa(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c7, c15, 3" : : "r" (addr));
+}
+
+static inline void tauros2_inv_pa(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c7, c7, 3" : : "r" (addr));
+}
+
+
+/*
+ * Linux primitives.
+ *
+ * Note that the end addresses passed to Linux primitives are
+ * noninclusive.
+ */
+#define CACHE_LINE_SIZE		32
+
+static void tauros2_inv_range(unsigned long start, unsigned long end)
+{
+	/*
+	 * Clean and invalidate partial first cache line.
+	 */
+	if (start & (CACHE_LINE_SIZE - 1)) {
+		tauros2_clean_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
+		start = (start | (CACHE_LINE_SIZE - 1)) + 1;
+	}
+
+	/*
+	 * Clean and invalidate partial last cache line.
+	 */
+	if (end & (CACHE_LINE_SIZE - 1)) {
+		tauros2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
+		end &= ~(CACHE_LINE_SIZE - 1);
+	}
+
+	/*
+	 * Invalidate all full cache lines between 'start' and 'end'.
+	 */
+	while (start < end) {
+		tauros2_inv_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+
+static void tauros2_clean_range(unsigned long start, unsigned long end)
+{
+	start &= ~(CACHE_LINE_SIZE - 1);
+	while (start < end) {
+		tauros2_clean_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+
+static void tauros2_flush_range(unsigned long start, unsigned long end)
+{
+	start &= ~(CACHE_LINE_SIZE - 1);
+	while (start < end) {
+		tauros2_clean_inv_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+#endif
+
+static inline u32 __init read_extra_features(void)
+{
+	u32 u;
+
+	__asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (u));
+
+	return u;
+}
+
+static inline void __init write_extra_features(u32 u)
+{
+	__asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
+}
+
+static void __init disable_l2_prefetch(void)
+{
+	u32 u;
+
+	/*
+	 * Read the CPU Extra Features register and verify that the
+	 * Disable L2 Prefetch bit is set.
+	 */
+	u = read_extra_features();
+	if (!(u & 0x01000000)) {
+		printk(KERN_INFO "Tauros2: Disabling L2 prefetch.\n");
+		write_extra_features(u | 0x01000000);
+	}
+}
+
+static inline int __init cpuid_scheme(void)
+{
+	extern int processor_id;
+
+	return !!((processor_id & 0x000f0000) == 0x000f0000);
+}
+
+static inline u32 __init read_mmfr3(void)
+{
+	u32 mmfr3;
+
+	__asm__("mrc p15, 0, %0, c0, c1, 7\n" : "=r" (mmfr3));
+
+	return mmfr3;
+}
+
+static inline u32 __init read_actlr(void)
+{
+	u32 actlr;
+
+	__asm__("mrc p15, 0, %0, c1, c0, 1\n" : "=r" (actlr));
+
+	return actlr;
+}
+
+static inline void __init write_actlr(u32 actlr)
+{
+	__asm__("mcr p15, 0, %0, c1, c0, 1\n" : : "r" (actlr));
+}
+
+void __init tauros2_init(void)
+{
+	extern int processor_id;
+	char *mode;
+
+	disable_l2_prefetch();
+
+#ifdef CONFIG_CPU_32v5
+	if ((processor_id & 0xff0f0000) == 0x56050000) {
+		u32 feat;
+
+		/*
+		 * v5 CPUs with Tauros2 have the L2 cache enable bit
+		 * located in the CPU Extra Features register.
+		 */
+		feat = read_extra_features();
+		if (!(feat & 0x00400000)) {
+			printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+			write_extra_features(feat | 0x00400000);
+		}
+
+		mode = "ARMv5";
+		outer_cache.inv_range = tauros2_inv_range;
+		outer_cache.clean_range = tauros2_clean_range;
+		outer_cache.flush_range = tauros2_flush_range;
+	}
+#endif
+
+#ifdef CONFIG_CPU_32v6
+	/*
+	 * Check whether this CPU lacks support for the v7 hierarchical
+	 * cache ops.  (PJ4 is in its v6 personality mode if the MMFR3
+	 * register indicates no support for the v7 hierarchical cache
+	 * ops.)
+	 */
+	if (cpuid_scheme() && (read_mmfr3() & 0xf) == 0) {
+		/*
+		 * When Tauros2 is used in an ARMv6 system, the L2
+		 * enable bit is in the ARMv6 ARM-mandated position
+		 * (bit [26] of the System Control Register).
+		 */
+		if (!(get_cr() & 0x04000000)) {
+			printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+			adjust_cr(0x04000000, 0x04000000);
+		}
+
+		mode = "ARMv6";
+		outer_cache.inv_range = tauros2_inv_range;
+		outer_cache.clean_range = tauros2_clean_range;
+		outer_cache.flush_range = tauros2_flush_range;
+	}
+#endif
+
+#ifdef CONFIG_CPU_32v7
+	/*
+	 * Check whether this CPU has support for the v7 hierarchical
+	 * cache ops.  (PJ4 is in its v7 personality mode if the MMFR3
+	 * register indicates support for the v7 hierarchical cache
+	 * ops.)
+	 *
+	 * (Although strictly speaking there may exist CPUs that
+	 * implement the v7 cache ops but are only ARMv6 CPUs (due to
+	 * not complying with all of the other ARMv7 requirements),
+	 * there are no real-life examples of Tauros2 being used on
+	 * such CPUs as of yet.)
+	 */
+	if (cpuid_scheme() && (read_mmfr3() & 0xf) == 1) {
+		u32 actlr;
+
+		/*
+		 * When Tauros2 is used in an ARMv7 system, the L2
+		 * enable bit is located in the Auxiliary System Control
+		 * Register (which is the only register allowed by the
+		 * ARMv7 spec to contain fine-grained cache control bits).
+		 */
+		actlr = read_actlr();
+		if (!(actlr & 0x00000002)) {
+			printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+			write_actlr(actlr | 0x00000002);
+		}
+
+		mode = "ARMv7";
+	}
+#endif
+
+	if (mode == NULL) {
+		printk(KERN_CRIT "Tauros2: Unable to detect CPU mode.\n");
+		return;
+	}
+
+	printk(KERN_INFO "Tauros2: L2 cache support initialised "
+			 "in %s mode.\n", mode);
+}

arch/arm/mm/proc-v6.S

@@ -130,9 +130,16 @@ ENTRY(cpu_v6_set_pte_ext)
 
 
 
-
+	.type	cpu_v6_name, #object
 cpu_v6_name:
 	.asciz	"ARMv6-compatible processor"
+	.size	cpu_v6_name, . - cpu_v6_name
+
+	.type	cpu_pj4_name, #object
+cpu_pj4_name:
+	.asciz	"Marvell PJ4 processor"
+	.size	cpu_pj4_name, . - cpu_pj4_name
+
 	.align
 
 	__INIT
@@ -241,3 +248,27 @@ __v6_proc_info:
 	.long	v6_user_fns
 	.long	v6_cache_fns
 	.size	__v6_proc_info, . - __v6_proc_info
+
+	.type	__pj4_v6_proc_info, #object
+__pj4_v6_proc_info:
+	.long	0x560f5810
+	.long	0xff0ffff0
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_XN | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__v6_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_pj4_name
+	.long	v6_processor_functions
+	.long	v6wbi_tlb_fns
+	.long	v6_user_fns
+	.long	v6_cache_fns
+	.size	__pj4_v6_proc_info, . - __pj4_v6_proc_info

drivers/rtc/Kconfig

@@ -780,7 +780,7 @@ config RTC_DRV_TX4939
 
 config RTC_DRV_MV
 	tristate "Marvell SoC RTC"
-	depends on ARCH_KIRKWOOD
+	depends on ARCH_KIRKWOOD || ARCH_DOVE
 	help
 	  If you say yes here you will get support for the in-chip RTC
 	  that can be found in some of Marvell's SoC devices, such as