diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt
index b80606de545ad809fb147688060b26b51af4d5e1..f59c43b6411b7d1b51b48c9acc1dd4b5f2338337 100644
--- a/Documentation/gpio/board.txt
+++ b/Documentation/gpio/board.txt
@@ -21,8 +21,8 @@ exact way to do it depends on the GPIO controller providing the GPIOs, see the
 device tree bindings for your controller.
 
 GPIOs mappings are defined in the consumer device's node, in a property named
-<function>-gpios, where <function> is the function the driver will request
-through gpiod_get(). For example:
+either <function>-gpios or <function>-gpio, where <function> is the function
+the driver will request through gpiod_get(). For example:
 
 	foo_device {
 		compatible = "acme,foo";
@@ -31,7 +31,7 @@ through gpiod_get(). For example:
 			    <&gpio 16 GPIO_ACTIVE_HIGH>, /* green */
 			    <&gpio 17 GPIO_ACTIVE_HIGH>; /* blue */
 
-		power-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+		power-gpio = <&gpio 1 GPIO_ACTIVE_LOW>;
 	};
 
 This property will make GPIOs 15, 16 and 17 available to the driver under the
@@ -39,15 +39,24 @@ This property will make GPIOs 15, 16 and 17 available to the driver under the
 
 	struct gpio_desc *red, *green, *blue, *power;
 
-	red = gpiod_get_index(dev, "led", 0);
-	green = gpiod_get_index(dev, "led", 1);
-	blue = gpiod_get_index(dev, "led", 2);
+	red = gpiod_get_index(dev, "led", 0, GPIOD_OUT_HIGH);
+	green = gpiod_get_index(dev, "led", 1, GPIOD_OUT_HIGH);
+	blue = gpiod_get_index(dev, "led", 2, GPIOD_OUT_HIGH);
 
-	power = gpiod_get(dev, "power");
+	power = gpiod_get(dev, "power", GPIOD_OUT_HIGH);
 
 The led GPIOs will be active-high, while the power GPIO will be active-low (i.e.
 gpiod_is_active_low(power) will be true).
 
+The second parameter of the gpiod_get() functions, the con_id string, has to be
+the <function>-prefix of the GPIO suffixes ("gpios" or "gpio", automatically
+looked up by the gpiod functions internally) used in the device tree. With above
+"led-gpios" example, use the prefix without the "-" as con_id parameter: "led".
+
+Internally, the GPIO subsystem prefixes the GPIO suffix ("gpios" or "gpio")
+with the string passed in con_id to get the resulting string
+(snprintf(... "%s-%s", con_id, gpio_suffixes[]).
+
 ACPI
 ----
 ACPI also supports function names for GPIOs in a similar fashion to DT.
@@ -142,13 +151,14 @@ The driver controlling "foo.0" will then be able to obtain its GPIOs as follows:
 
 	struct gpio_desc *red, *green, *blue, *power;
 
-	red = gpiod_get_index(dev, "led", 0);
-	green = gpiod_get_index(dev, "led", 1);
-	blue = gpiod_get_index(dev, "led", 2);
+	red = gpiod_get_index(dev, "led", 0, GPIOD_OUT_HIGH);
+	green = gpiod_get_index(dev, "led", 1, GPIOD_OUT_HIGH);
+	blue = gpiod_get_index(dev, "led", 2, GPIOD_OUT_HIGH);
 
-	power = gpiod_get(dev, "power");
-	gpiod_direction_output(power, 1);
+	power = gpiod_get(dev, "power", GPIOD_OUT_HIGH);
 
-Since the "power" GPIO is mapped as active-low, its actual signal will be 0
-after this code. Contrary to the legacy integer GPIO interface, the active-low
-property is handled during mapping and is thus transparent to GPIO consumers.
+Since the "led" GPIOs are mapped as active-high, this example will switch their
+signals to 1, i.e. enabling the LEDs. And for the "power" GPIO, which is mapped
+as active-low, its actual signal will be 0 after this code. Contrary to the legacy
+integer GPIO interface, the active-low property is handled during mapping and is
+thus transparent to GPIO consumers.
diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt
index a206639454ab7acdbf797c2598d818d2dc372544..e000502fde2006aa958a01e5c4fd357c5a6a21f9 100644
--- a/Documentation/gpio/consumer.txt
+++ b/Documentation/gpio/consumer.txt
@@ -39,6 +39,9 @@ device that displays digits), an additional index argument can be specified:
 					  const char *con_id, unsigned int idx,
 					  enum gpiod_flags flags)
 
+For a more detailed description of the con_id parameter in the DeviceTree case
+see Documentation/gpio/board.txt
+
 The flags parameter is used to optionally specify a direction and initial value
 for the GPIO. Values can be:
 
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b4fc9e4d24c6b15857e2a2cd3c1000e0473af8f9..8949b3f6f74d207f0bc935af11dd76cf956b49ba 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -356,7 +356,7 @@ config GPIO_PXA
 
 config GPIO_RCAR
 	tristate "Renesas R-Car GPIO"
-	depends on ARM && (ARCH_SHMOBILE || COMPILE_TEST)
+	depends on ARCH_SHMOBILE || COMPILE_TEST
 	select GPIOLIB_IRQCHIP
 	help
 	  Say yes here to support GPIO on Renesas R-Car SoCs.
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index b752b560126e71c0066fd66f659641155b39ad71..8813abab9736e86246d0ab90740fbbf89c70fbbc 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -339,13 +339,15 @@ static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
 	return 0;
 }
 
-static void mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
+static int mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
 {
 	struct irq_chip_generic *gc;
 	struct irq_chip_type *ct;
 
 	gc = irq_alloc_generic_chip("gpio-mxc", 1, irq_base,
 				    port->base, handle_level_irq);
+	if (!gc)
+		return -ENOMEM;
 	gc->private = port;
 
 	ct = gc->chip_types;
@@ -360,6 +362,8 @@ static void mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
 
 	irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK,
 			       IRQ_NOREQUEST, 0);
+
+	return 0;
 }
 
 static void mxc_gpio_get_hw(struct platform_device *pdev)
@@ -477,12 +481,16 @@ static int mxc_gpio_probe(struct platform_device *pdev)
 	}
 
 	/* gpio-mxc can be a generic irq chip */
-	mxc_gpio_init_gc(port, irq_base);
+	err = mxc_gpio_init_gc(port, irq_base);
+	if (err < 0)
+		goto out_irqdomain_remove;
 
 	list_add_tail(&port->node, &mxc_gpio_ports);
 
 	return 0;
 
+out_irqdomain_remove:
+	irq_domain_remove(port->domain);
 out_irqdesc_free:
 	irq_free_descs(irq_base, 32);
 out_gpiochip_remove:
diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
index b7f383eb18d91e2f82831e4813b987d74d18d77b..1387385e66978cbf096d033e8db152d88e8b1a8a 100644
--- a/drivers/gpio/gpio-mxs.c
+++ b/drivers/gpio/gpio-mxs.c
@@ -196,13 +196,16 @@ static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable)
 	return 0;
 }
 
-static void __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
+static int __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
 {
 	struct irq_chip_generic *gc;
 	struct irq_chip_type *ct;
 
 	gc = irq_alloc_generic_chip("gpio-mxs", 1, irq_base,
 				    port->base, handle_level_irq);
+	if (!gc)
+		return -ENOMEM;
+
 	gc->private = port;
 
 	ct = gc->chip_types;
@@ -216,6 +219,8 @@ static void __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
 
 	irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK,
 			       IRQ_NOREQUEST, 0);
+
+	return 0;
 }
 
 static int mxs_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
@@ -317,7 +322,9 @@ static int mxs_gpio_probe(struct platform_device *pdev)
 	}
 
 	/* gpio-mxs can be a generic irq chip */
-	mxs_gpio_init_gc(port, irq_base);
+	err = mxs_gpio_init_gc(port, irq_base);
+	if (err < 0)
+		goto out_irqdomain_remove;
 
 	/* setup one handler for each entry */
 	irq_set_chained_handler_and_data(port->irq, mxs_gpio_irq_handler,
@@ -343,6 +350,8 @@ static int mxs_gpio_probe(struct platform_device *pdev)
 
 out_bgpio_remove:
 	bgpio_remove(&port->bgc);
+out_irqdomain_remove:
+	irq_domain_remove(port->domain);
 out_irqdesc_free:
 	irq_free_descs(irq_base, 32);
 	return err;
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 2ae0d47e955443f7f1aec2f51c522466aa54ce30..072af5239bc14867ab38d69dbe04d9ce68e5d925 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1098,7 +1098,6 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
 	} else {
 		bank->chip.label = "gpio";
 		bank->chip.base = gpio;
-		gpio += bank->width;
 	}
 	bank->chip.ngpio = bank->width;
 
@@ -1108,6 +1107,9 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
 		return ret;
 	}
 
+	if (!bank->is_mpuio)
+		gpio += bank->width;
+
 #ifdef CONFIG_ARCH_OMAP1
 	/*
 	 * REVISIT: Once we have OMAP1 supporting SPARSE_IRQ, we can drop
@@ -1253,8 +1255,11 @@ static int omap_gpio_probe(struct platform_device *pdev)
 	omap_gpio_mod_init(bank);
 
 	ret = omap_gpio_chip_init(bank, irqc);
-	if (ret)
+	if (ret) {
+		pm_runtime_put_sync(bank->dev);
+		pm_runtime_disable(bank->dev);
 		return ret;
+	}
 
 	omap_gpio_show_rev(bank);
 
diff --git a/drivers/gpio/gpio-sx150x.c b/drivers/gpio/gpio-sx150x.c
index 458d9d7952b840af2d7d2666ef3567dac8244403..9c6b96707c9f286a9bbf13c756beab7d4cedbace 100644
--- a/drivers/gpio/gpio-sx150x.c
+++ b/drivers/gpio/gpio-sx150x.c
@@ -706,4 +706,3 @@ module_exit(sx150x_exit);
 MODULE_AUTHOR("Gregory Bean <gbean@codeaurora.org>");
 MODULE_DESCRIPTION("Driver for Semtech SX150X I2C GPIO Expanders");
 MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("i2c:sx150x");
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 980c1f87866ac268b3dc8046faec602e57ca32c9..5db3445552b176d2c11ca8b225ef88b4b80d22eb 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1174,15 +1174,16 @@ EXPORT_SYMBOL_GPL(gpiod_is_active_low);
  * that the GPIO was actually requested.
  */
 
-static bool _gpiod_get_raw_value(const struct gpio_desc *desc)
+static int _gpiod_get_raw_value(const struct gpio_desc *desc)
 {
 	struct gpio_chip	*chip;
-	bool value;
 	int offset;
+	int value;
 
 	chip = desc->chip;
 	offset = gpio_chip_hwgpio(desc);
-	value = chip->get ? chip->get(chip, offset) : false;
+	value = chip->get ? chip->get(chip, offset) : -EIO;
+	value = value < 0 ? value : !!value;
 	trace_gpio_value(desc_to_gpio(desc), 1, value);
 	return value;
 }
@@ -1192,7 +1193,7 @@ static bool _gpiod_get_raw_value(const struct gpio_desc *desc)
  * @desc: gpio whose value will be returned
  *
  * Return the GPIO's raw value, i.e. the value of the physical line disregarding
- * its ACTIVE_LOW status.
+ * its ACTIVE_LOW status, or negative errno on failure.
  *
  * This function should be called from contexts where we cannot sleep, and will
  * complain if the GPIO chip functions potentially sleep.
@@ -1212,7 +1213,7 @@ EXPORT_SYMBOL_GPL(gpiod_get_raw_value);
  * @desc: gpio whose value will be returned
  *
  * Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
- * account.
+ * account, or negative errno on failure.
  *
  * This function should be called from contexts where we cannot sleep, and will
  * complain if the GPIO chip functions potentially sleep.
@@ -1226,6 +1227,9 @@ int gpiod_get_value(const struct gpio_desc *desc)
 	WARN_ON(desc->chip->can_sleep);
 
 	value = _gpiod_get_raw_value(desc);
+	if (value < 0)
+		return value;
+
 	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
 		value = !value;
 
@@ -1548,7 +1552,7 @@ EXPORT_SYMBOL_GPL(gpiochip_unlock_as_irq);
  * @desc: gpio whose value will be returned
  *
  * Return the GPIO's raw value, i.e. the value of the physical line disregarding
- * its ACTIVE_LOW status.
+ * its ACTIVE_LOW status, or negative errno on failure.
  *
  * This function is to be called from contexts that can sleep.
  */
@@ -1566,7 +1570,7 @@ EXPORT_SYMBOL_GPL(gpiod_get_raw_value_cansleep);
  * @desc: gpio whose value will be returned
  *
  * Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
- * account.
+ * account, or negative errno on failure.
  *
  * This function is to be called from contexts that can sleep.
  */
@@ -1579,6 +1583,9 @@ int gpiod_get_value_cansleep(const struct gpio_desc *desc)
 		return 0;
 
 	value = _gpiod_get_raw_value(desc);
+	if (value < 0)
+		return value;
+
 	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
 		value = !value;