ARM: dts: add SoC level device tree source for VF610

Add SoC level device tree source for Freescale Vybrid VF610.
Signed-off-by: NJingchang Lu <b35083@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

arch/arm/boot/dts/vf610.dtsi

+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "skeleton.dtsi"
+#include "vf610-pinfunc.h"
+#include <dt-bindings/clock/vf610-clock.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a5";
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sxosc {
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		fxosc {
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		aips0: aips-bus@40000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&intc>;
+			reg = <0x40000000 0x70000>;
+			ranges;
+
+			intc: interrupt-controller@40002000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				reg = <0x40003000 0x1000>,
+				      <0x40002100 0x100>;
+			};
+
+			L2: l2-cache@40006000 {
+				compatible = "arm,pl310-cache";
+				reg = <0x40006000 0x1000>;
+				cache-unified;
+				cache-level = <2>;
+				arm,data-latency = <1 1 1>;
+				arm,tag-latency = <2 2 2>;
+			};
+
+			uart0: serial@40027000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x40027000 0x1000>;
+				interrupts = <0 61 0x00>;
+				clocks = <&clks VF610_CLK_UART0>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			uart1: serial@40028000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x40028000 0x1000>;
+				interrupts = <0 62 0x04>;
+				clocks = <&clks VF610_CLK_UART1>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			uart2: serial@40029000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x40029000 0x1000>;
+				interrupts = <0 63 0x04>;
+				clocks = <&clks VF610_CLK_UART2>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			uart3: serial@4002a000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x4002a000 0x1000>;
+				interrupts = <0 64 0x04>;
+				clocks = <&clks VF610_CLK_UART3>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			sai2: sai@40031000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x40031000 0x1000>;
+				interrupts = <0 86 0x04>;
+				clocks = <&clks VF610_CLK_SAI2>;
+				clock-names = "sai";
+				status = "disabled";
+			};
+
+			pit: pit@40037000 {
+				compatible = "fsl,vf610-pit";
+				reg = <0x40037000 0x1000>;
+				interrupts = <0 39 0x04>;
+				clocks = <&clks VF610_CLK_PIT>;
+				clock-names = "pit";
+			};
+
+			wdog@4003e000 {
+				compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
+				reg = <0x4003e000 0x1000>;
+				clocks = <&clks VF610_CLK_WDT>;
+				clock-names = "wdog";
+			};
+
+			qspi0: quadspi@40044000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-qspi";
+				reg = <0x40044000 0x1000>;
+				interrupts = <0 24 0x04>;
+				clocks = <&clks VF610_CLK_QSPI0_EN>,
+					<&clks VF610_CLK_QSPI0>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@40048000 {
+				compatible = "fsl,vf610-iomuxc";
+				reg = <0x40048000 0x1000>;
+				#gpio-range-cells = <2>;
+
+				/* functions and groups pins */
+
+				dcu0 {
+					pinctrl_dcu0_1: dcu0grp_1 {
+						fsl,pins = <
+						VF610_PAD_PTB8__GPIO_30		0x42
+						VF610_PAD_PTE0__DCU0_HSYNC	0x42
+						VF610_PAD_PTE1__DCU0_VSYNC	0x42
+						VF610_PAD_PTE2__DCU0_PCLK	0x42
+						VF610_PAD_PTE4__DCU0_DE		0x42
+						VF610_PAD_PTE5__DCU0_R0		0x42
+						VF610_PAD_PTE6__DCU0_R1		0x42
+						VF610_PAD_PTE7__DCU0_R2		0x42
+						VF610_PAD_PTE8__DCU0_R3		0x42
+						VF610_PAD_PTE9__DCU0_R4		0x42
+						VF610_PAD_PTE10__DCU0_R5	0x42
+						VF610_PAD_PTE11__DCU0_R6	0x42
+						VF610_PAD_PTE12__DCU0_R7	0x42
+						VF610_PAD_PTE13__DCU0_G0	0x42
+						VF610_PAD_PTE14__DCU0_G1	0x42
+						VF610_PAD_PTE15__DCU0_G2	0x42
+						VF610_PAD_PTE16__DCU0_G3	0x42
+						VF610_PAD_PTE17__DCU0_G4	0x42
+						VF610_PAD_PTE18__DCU0_G5	0x42
+						VF610_PAD_PTE19__DCU0_G6	0x42
+						VF610_PAD_PTE20__DCU0_G7	0x42
+						VF610_PAD_PTE21__DCU0_B0	0x42
+						VF610_PAD_PTE22__DCU0_B1	0x42
+						VF610_PAD_PTE23__DCU0_B2	0x42
+						VF610_PAD_PTE24__DCU0_B3	0x42
+						VF610_PAD_PTE25__DCU0_B4	0x42
+						VF610_PAD_PTE26__DCU0_B5	0x42
+						VF610_PAD_PTE27__DCU0_B6	0x42
+						VF610_PAD_PTE28__DCU0_B7	0x42
+						>;
+					};
+				};
+
+				dspi0 {
+					pinctrl_dspi0_1: dspi0grp_1 {
+						fsl,pins = <
+						VF610_PAD_PTB19__DSPI0_CS0	0x1182
+						VF610_PAD_PTB20__DSPI0_SIN	0x1181
+						VF610_PAD_PTB21__DSPI0_SOUT	0x1182
+						VF610_PAD_PTB22__DSPI0_SCK	0x1182
+						>;
+					};
+				};
+
+				esdhc1 {
+					pinctrl_esdhc1_1: esdhc1grp_1 {
+						fsl,pins = <
+						VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+						VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+						VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+						VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+						VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+						VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+						VF610_PAD_PTA7__GPIO_134	0x219d
+						>;
+					};
+				};
+
+				fec0 {
+					pinctrl_fec0_1: fec0grp_1 {
+						fsl,pins = <
+						VF610_PAD_PTA6__RMII_CLKIN	0x30d1
+						VF610_PAD_PTC0__ENET_RMII0_MDC	0x30d3
+						VF610_PAD_PTC1__ENET_RMII0_MDIO	0x30d1
+						VF610_PAD_PTC2__ENET_RMII0_CRS	0x30d1
+						VF610_PAD_PTC3__ENET_RMII0_RXD1	0x30d1
+						VF610_PAD_PTC4__ENET_RMII0_RXD0	0x30d1
+						VF610_PAD_PTC5__ENET_RMII0_RXER	0x30d1
+						VF610_PAD_PTC6__ENET_RMII0_TXD1	0x30d2
+						VF610_PAD_PTC7__ENET_RMII0_TXD0	0x30d2
+						VF610_PAD_PTC8__ENET_RMII0_TXEN	0x30d2
+						>;
+					};
+				};
+
+				fec1 {
+					pinctrl_fec1_1: fec1grp_1 {
+						fsl,pins = <
+						VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+						VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+						VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+						VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
+						VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+						VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+						VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+						VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+						VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+						>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0_1: i2c0grp_1 {
+						fsl,pins = <
+						VF610_PAD_PTB14__I2C0_SCL	0x30d3
+						VF610_PAD_PTB15__I2C0_SDA	0x30d3
+						>;
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_1: pwm0grp_1 {
+						fsl,pins = <
+						VF610_PAD_PTB0__FTM0_CH0	0x1582
+						VF610_PAD_PTB1__FTM0_CH1	0x1582
+						VF610_PAD_PTB2__FTM0_CH2	0x1582
+						VF610_PAD_PTB3__FTM0_CH3	0x1582
+						VF610_PAD_PTB6__FTM0_CH6	0x1582
+						VF610_PAD_PTB7__FTM0_CH7	0x1582
+						>;
+					};
+				};
+
+				qspi0 {
+					pinctrl_qspi0_1: qspi0grp_1 {
+						fsl,pins = <
+						VF610_PAD_PTD0__QSPI0_A_QSCK	0x307b
+						VF610_PAD_PTD1__QSPI0_A_CS0	0x307f
+						VF610_PAD_PTD2__QSPI0_A_DATA3	0x3073
+						VF610_PAD_PTD3__QSPI0_A_DATA2	0x3073
+						VF610_PAD_PTD4__QSPI0_A_DATA1	0x3073
+						VF610_PAD_PTD5__QSPI0_A_DATA0	0x307b
+						VF610_PAD_PTD7__QSPI0_B_QSCK	0x307b
+						VF610_PAD_PTD8__QSPI0_B_CS0	0x307f
+						VF610_PAD_PTD9__QSPI0_B_DATA3	0x3073
+						VF610_PAD_PTD10__QSPI0_B_DATA2	0x3073
+						VF610_PAD_PTD11__QSPI0_B_DATA1	0x3073
+						VF610_PAD_PTD12__QSPI0_B_DATA0	0x307b
+						>;
+					};
+				};
+
+				sai2 {
+					pinctrl_sai2_1: sai2grp_1 {
+						fsl,pins = <
+						VF610_PAD_PTA16__SAI2_TX_BCLK	0x02ed
+						VF610_PAD_PTA18__SAI2_TX_DATA	0x02ee
+						VF610_PAD_PTA19__SAI2_TX_SYNC	0x02ed
+						VF610_PAD_PTA21__SAI2_RX_BCLK	0x02ed
+						VF610_PAD_PTA22__SAI2_RX_DATA	0x02ed
+						VF610_PAD_PTA23__SAI2_RX_SYNC	0x02ed
+						VF610_PAD_PTB18__EXT_AUDIO_MCLK	0x02ed
+						>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1_1: uart1grp_1 {
+						fsl,pins = <
+						VF610_PAD_PTB4__UART1_TX	0x21a2
+						VF610_PAD_PTB5__UART1_RX	0x21a1
+						>;
+					};
+				};
+
+				usbvbus {
+					pinctrl_usbvbus_1: usbvbusgrp_1 {
+						fsl,pins = <
+						VF610_PAD_PTA24__USB1_VBUS_EN	0x219c
+						VF610_PAD_PTA16__USB0_VBUS_EN	0x219c
+						>;
+					};
+				};
+
+			};
+
+			gpio1: gpio@40049000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x40049000 0x1000 0x400ff000 0x40>;
+				interrupts = <0 107 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 32>;
+			};
+
+			gpio2: gpio@4004a000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x4004a000 0x1000 0x400ff040 0x40>;
+				interrupts = <0 108 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 32 32>;
+			};
+
+			gpio3: gpio@4004b000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x4004b000 0x1000 0x400ff080 0x40>;
+				interrupts = <0 109 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 64 32>;
+			};
+
+			gpio4: gpio@4004c000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
+				interrupts = <0 110 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 96 32>;
+			};
+
+			gpio5: gpio@4004d000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x4004d000 0x1000 0x400ff100 0x40>;
+				interrupts = <0 111 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 128 7>;
+			};
+
+			anatop@40050000 {
+				compatible = "fsl,vf610-anatop";
+				reg = <0x40050000 0x1000>;
+			};
+
+			i2c0: i2c@40066000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x40066000 0x1000>;
+				interrupts =<0 71 0x04>;
+				clocks = <&clks VF610_CLK_I2C0>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			clks: ccm@4006b000 {
+				compatible = "fsl,vf610-ccm";
+				reg = <0x4006b000 0x1000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		aips1: aips-bus@40080000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40080000 0x80000>;
+			ranges;
+
+			uart4: serial@400a9000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x400a9000 0x1000>;
+				interrupts = <0 65 0x04>;
+				clocks = <&clks VF610_CLK_UART4>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			uart5: serial@400aa000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x400aa000 0x1000>;
+				interrupts = <0 66 0x04>;
+				clocks = <&clks VF610_CLK_UART5>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			fec0: ethernet@400d0000 {
+				compatible = "fsl,mvf600-fec";
+				reg = <0x400d0000 0x1000>;
+				interrupts = <0 78 0x04>;
+				clocks = <&clks VF610_CLK_ENET>,
+					<&clks VF610_CLK_ENET>,
+					<&clks VF610_CLK_ENET>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+
+			fec1: ethernet@400d1000 {
+				compatible = "fsl,mvf600-fec";
+				reg = <0x400d1000 0x1000>;
+				interrupts = <0 79 0x04>;
+				clocks = <&clks VF610_CLK_ENET>,
+					<&clks VF610_CLK_ENET>,
+					<&clks VF610_CLK_ENET>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+		};
+	};
+};