Merge branch 'lpc32xx/core' of git://git.antcom.de/linux-2.6 into next/soc

* 'lpc32xx/core' of git://git.antcom.de/linux-2.6:
  ARM: LPC32xx: Remove board specific GPIO init
  ARM: LPC32xx: Provide DMA filter callbacks via platform data
  ARM: LPC32xx: Use handle_edge_irq() callback on edge type irqs
  + sync to 3.6-rc4

Documentation/block/00-INDEX

@@ -3,15 +3,21 @@
 biodoc.txt
 	- Notes on the Generic Block Layer Rewrite in Linux 2.5
 capability.txt
-	- Generic Block Device Capability (/sys/block/<disk>/capability)
+	- Generic Block Device Capability (/sys/block/<device>/capability)
+cfq-iosched.txt
+	- CFQ IO scheduler tunables
+data-integrity.txt
+	- Block data integrity
 deadline-iosched.txt
 	- Deadline IO scheduler tunables
 ioprio.txt
 	- Block io priorities (in CFQ scheduler)
+queue-sysfs.txt
+	- Queue's sysfs entries
 request.txt
 	- The members of struct request (in include/linux/blkdev.h)
 stat.txt
-	- Block layer statistics in /sys/block/<dev>/stat
+	- Block layer statistics in /sys/block/<device>/stat
 switching-sched.txt
 	- Switching I/O schedulers at runtime
 writeback_cache_control.txt

Documentation/block/cfq-iosched.txt

+CFQ (Complete Fairness Queueing)
+===============================
+
+The main aim of CFQ scheduler is to provide a fair allocation of the disk
+I/O bandwidth for all the processes which requests an I/O operation.
+
+CFQ maintains the per process queue for the processes which request I/O
+operation(syncronous requests). In case of asynchronous requests, all the
+requests from all the processes are batched together according to their
+process's I/O priority.
+
 CFQ ioscheduler tunables
 ========================
 
@@ -25,6 +36,72 @@ there are multiple spindles behind single LUN (Host based hardware RAID
 controller or for storage arrays), setting slice_idle=0 might end up in better
 throughput and acceptable latencies.
 
+back_seek_max
+-------------
+This specifies, given in Kbytes, the maximum "distance" for backward seeking.
+The distance is the amount of space from the current head location to the
+sectors that are backward in terms of distance.
+
+This parameter allows the scheduler to anticipate requests in the "backward"
+direction and consider them as being the "next" if they are within this
+distance from the current head location.
+
+back_seek_penalty
+-----------------
+This parameter is used to compute the cost of backward seeking. If the
+backward distance of request is just 1/back_seek_penalty from a "front"
+request, then the seeking cost of two requests is considered equivalent.
+
+So scheduler will not bias toward one or the other request (otherwise scheduler
+will bias toward front request). Default value of back_seek_penalty is 2.
+
+fifo_expire_async
+-----------------
+This parameter is used to set the timeout of asynchronous requests. Default
+value of this is 248ms.
+
+fifo_expire_sync
+----------------
+This parameter is used to set the timeout of synchronous requests. Default
+value of this is 124ms. In case to favor synchronous requests over asynchronous
+one, this value should be decreased relative to fifo_expire_async.
+
+slice_async
+-----------
+This parameter is same as of slice_sync but for asynchronous queue. The
+default value is 40ms.
+
+slice_async_rq
+--------------
+This parameter is used to limit the dispatching of asynchronous request to
+device request queue in queue's slice time. The maximum number of request that
+are allowed to be dispatched also depends upon the io priority. Default value
+for this is 2.
+
+slice_sync
+----------
+When a queue is selected for execution, the queues IO requests are only
+executed for a certain amount of time(time_slice) before switching to another
+queue. This parameter is used to calculate the time slice of synchronous
+queue.
+
+time_slice is computed using the below equation:-
+time_slice = slice_sync + (slice_sync/5 * (4 - prio)). To increase the
+time_slice of synchronous queue, increase the value of slice_sync. Default
+value is 100ms.
+
+quantum
+-------
+This specifies the number of request dispatched to the device queue. In a
+queue's time slice, a request will not be dispatched if the number of request
+in the device exceeds this parameter. This parameter is used for synchronous
+request.
+
+In case of storage with several disk, this setting can limit the parallel
+processing of request. Therefore, increasing the value can imporve the
+performace although this can cause the latency of some I/O to increase due
+to more number of requests.
+
 CFQ IOPS Mode for group scheduling
 ===================================
 Basic CFQ design is to provide priority based time slices. Higher priority

Documentation/block/queue-sysfs.txt

@@ -9,20 +9,71 @@ These files are the ones found in the /sys/block/xxx/queue/ directory.
 Files denoted with a RO postfix are readonly and the RW postfix means
 read-write.
 
+add_random (RW)
+----------------
+This file allows to trun off the disk entropy contribution. Default
+value of this file is '1'(on).
+
+discard_granularity (RO)
+-----------------------
+This shows the size of internal allocation of the device in bytes, if
+reported by the device. A value of '0' means device does not support
+the discard functionality.
+
+discard_max_bytes (RO)
+----------------------
+Devices that support discard functionality may have internal limits on
+the number of bytes that can be trimmed or unmapped in a single operation.
+The discard_max_bytes parameter is set by the device driver to the maximum
+number of bytes that can be discarded in a single operation. Discard
+requests issued to the device must not exceed this limit. A discard_max_bytes
+value of 0 means that the device does not support discard functionality.
+
+discard_zeroes_data (RO)
+------------------------
+When read, this file will show if the discarded block are zeroed by the
+device or not. If its value is '1' the blocks are zeroed otherwise not.
+
 hw_sector_size (RO)
 -------------------
 This is the hardware sector size of the device, in bytes.
 
+iostats (RW)
+-------------
+This file is used to control (on/off) the iostats accounting of the
+disk.
+
+logical_block_size (RO)
+-----------------------
+This is the logcal block size of the device, in bytes.
+
 max_hw_sectors_kb (RO)
 ----------------------
 This is the maximum number of kilobytes supported in a single data transfer.
 
+max_integrity_segments (RO)
+---------------------------
+When read, this file shows the max limit of integrity segments as
+set by block layer which a hardware controller can handle.
+
 max_sectors_kb (RW)
 -------------------
 This is the maximum number of kilobytes that the block layer will allow
 for a filesystem request. Must be smaller than or equal to the maximum
 size allowed by the hardware.
 
+max_segments (RO)
+-----------------
+Maximum number of segments of the device.
+
+max_segment_size (RO)
+---------------------
+Maximum segment size of the device.
+
+minimum_io_size (RO)
+--------------------
+This is the smallest preferred io size reported by the device.
+
 nomerges (RW)
 -------------
 This enables the user to disable the lookup logic involved with IO
@@ -45,11 +96,24 @@ per-block-cgroup request pool.  IOW, if there are N block cgroups,
 each request queue may have upto N request pools, each independently
 regulated by nr_requests.
 
+optimal_io_size (RO)
+--------------------
+This is the optimal io size reported by the device.
+
+physical_block_size (RO)
+------------------------
+This is the physical block size of device, in bytes.
+
 read_ahead_kb (RW)
 ------------------
 Maximum number of kilobytes to read-ahead for filesystems on this block
 device.
 
+rotational (RW)
+---------------
+This file is used to stat if the device is of rotational type or
+non-rotational type.
+
 rq_affinity (RW)
 ----------------
 If this option is '1', the block layer will migrate request completions to the

Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt

@@ -10,8 +10,8 @@ Required properties:
 - compatible : Should be "fsl,<chip>-esdhc"
 
 Optional properties:
-- fsl,cd-internal : Indicate to use controller internal card detection
-- fsl,wp-internal : Indicate to use controller internal write protection
+- fsl,cd-controller : Indicate to use controller internal card detection
+- fsl,wp-controller : Indicate to use controller internal write protection
 
 Examples:
 
@@ -19,8 +19,8 @@ esdhc@70004000 {
 	compatible = "fsl,imx51-esdhc";
 	reg = <0x70004000 0x4000>;
 	interrupts = <1>;
-	fsl,cd-internal;
-	fsl,wp-internal;
+	fsl,cd-controller;
+	fsl,wp-controller;
 };
 
 esdhc@70008000 {

Documentation/watchdog/src/watchdog-test.c

@@ -31,7 +31,7 @@ static void keep_alive(void)
  * or "-e" to enable the card.
  */
 
-void term(int sig)
+static void term(int sig)
 {
     close(fd);
     fprintf(stderr, "Stopping watchdog ticks...\n");

Makefile

 VERSION = 3
 PATCHLEVEL = 6
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -2144,6 +2144,7 @@ source "drivers/cpufreq/Kconfig"
 config CPU_FREQ_IMX
 	tristate "CPUfreq driver for i.MX CPUs"
 	depends on ARCH_MXC && CPU_FREQ
+	select CPU_FREQ_TABLE
 	help
 	  This enables the CPUfreq driver for i.MX CPUs.
 

arch/arm/boot/dts/am33xx.dtsi

@@ -154,5 +154,10 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
 		};
+
+		wdt2: wdt@44e35000 {
+			compatible = "ti,omap3-wdt";
+			ti,hwmods = "wd_timer2";
+		};
 	};
 };

arch/arm/boot/dts/imx51-babbage.dts

@@ -25,8 +25,8 @@
 		aips@70000000 { /* aips-1 */
 			spba@70000000 {
 				esdhc@70004000 { /* ESDHC1 */
-					fsl,cd-internal;
-					fsl,wp-internal;
+					fsl,cd-controller;
+					fsl,wp-controller;
 					status = "okay";
 				};
 

arch/arm/boot/dts/kirkwood-iconnect.dts

@@ -41,9 +41,13 @@
 		};
 		power-blue {
 			label = "power:blue";
-			gpios = <&gpio1 11 0>;
+			gpios = <&gpio1 10 0>;
 			linux,default-trigger = "timer";
 		};
+		power-red {
+			label = "power:red";
+			gpios = <&gpio1 11 0>;
+		};
 		usb1 {
 			label = "usb1:blue";
 			gpios = <&gpio1 12 0>;

arch/arm/boot/dts/twl6030.dtsi

@@ -66,6 +66,7 @@
 
 	vcxio: regulator@8 {
 		compatible = "ti,twl6030-vcxio";
+		regulator-always-on;
 	};
 
 	vusb: regulator@9 {
@@ -74,10 +75,12 @@
 
 	v1v8: regulator@10 {
 		compatible = "ti,twl6030-v1v8";
+		regulator-always-on;
 	};
 
 	v2v1: regulator@11 {
 		compatible = "ti,twl6030-v2v1";
+		regulator-always-on;
 	};
 
 	clk32kg: regulator@12 {

arch/arm/configs/u8500_defconfig

@@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_LM3530=y
 CONFIG_LEDS_LP5521=y
+CONFIG_LEDS_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AB8500=y
 CONFIG_RTC_DRV_PL031=y

arch/arm/mach-dove/common.c

@@ -102,7 +102,8 @@ void __init dove_ehci1_init(void)
 void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE,
-			IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR);
+			IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR,
+			1600);
 }
 
 /*****************************************************************************

arch/arm/mach-exynos/mach-origen.c

@@ -42,6 +42,7 @@
 #include <plat/backlight.h>
 #include <plat/fb.h>
 #include <plat/mfc.h>
+#include <plat/hdmi.h>
 
 #include <mach/ohci.h>
 #include <mach/map.h>
@@ -734,6 +735,11 @@ static void __init origen_bt_setup(void)
 	s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE);
 }
 
+/* I2C module and id for HDMIPHY */
+static struct i2c_board_info hdmiphy_info = {
+	I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
+};
+
 static void s5p_tv_setup(void)
 {
 	/* Direct HPD to HDMI chip */
@@ -781,6 +787,7 @@ static void __init origen_machine_init(void)
 
 	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);
+	s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
 
 #ifdef CONFIG_DRM_EXYNOS
 	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;

arch/arm/mach-exynos/mach-smdkv310.c

@@ -40,6 +40,7 @@
 #include <plat/mfc.h>
 #include <plat/ehci.h>
 #include <plat/clock.h>
+#include <plat/hdmi.h>
 
 #include <mach/map.h>
 #include <mach/ohci.h>
@@ -354,6 +355,11 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = {
 	.pwm_period_ns  = 1000,
 };
 
+/* I2C module and id for HDMIPHY */
+static struct i2c_board_info hdmiphy_info = {
+	I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
+};
+
 static void s5p_tv_setup(void)
 {
 	/* direct HPD to HDMI chip */
@@ -388,6 +394,7 @@ static void __init smdkv310_machine_init(void)
 
 	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);
+	s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
 
 	samsung_keypad_set_platdata(&smdkv310_keypad_data);
 

arch/arm/mach-imx/Makefile

@@ -9,7 +9,8 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
 obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
 obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
 
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+imx5-pm-$(CONFIG_PM) += pm-imx5.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o
 
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
 			    clk-pfd.o clk-busy.o
@@ -70,14 +71,13 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
 obj-$(CONFIG_HAVE_IMX_SRC) += src.o
-obj-$(CONFIG_CPU_V7) += head-v7.o
-AFLAGS_head-v7.o :=-Wa,-march=armv7-a
-obj-$(CONFIG_SMP) += platsmp.o
+AFLAGS_headsmp.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
 
 ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
+obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
 endif
 
 # i.MX5 based machines

arch/arm/mach-imx/clk-imx6q.c

@@ -152,7 +152,7 @@ enum mx6q_clks {
 	ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
 	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
 	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
-	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2,
+	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
 	clk_max
 };
 
@@ -288,8 +288,10 @@ int __init mx6q_clocks_init(void)
 	clk[gpu3d_shader]     = imx_clk_divider("gpu3d_shader",     "gpu3d_shader_sel",  base + 0x18, 29, 3);
 	clk[ipu1_podf]        = imx_clk_divider("ipu1_podf",        "ipu1_sel",          base + 0x3c, 11, 3);
 	clk[ipu2_podf]        = imx_clk_divider("ipu2_podf",        "ipu2_sel",          base + 0x3c, 16, 3);
-	clk[ldb_di0_podf]     = imx_clk_divider("ldb_di0_podf",     "ldb_di0_sel",       base + 0x20, 10, 1);
-	clk[ldb_di1_podf]     = imx_clk_divider("ldb_di1_podf",     "ldb_di1_sel",       base + 0x20, 11, 1);
+	clk[ldb_di0_div_3_5]  = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+	clk[ldb_di0_podf]     = imx_clk_divider("ldb_di0_podf",     "ldb_di0_div_3_5",       base + 0x20, 10, 1);
+	clk[ldb_di1_div_3_5]  = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+	clk[ldb_di1_podf]     = imx_clk_divider("ldb_di1_podf",     "ldb_di1_div_3_5",   base + 0x20, 11, 1);
 	clk[ipu1_di0_pre]     = imx_clk_divider("ipu1_di0_pre",     "ipu1_di0_pre_sel",  base + 0x34, 3,  3);
 	clk[ipu1_di1_pre]     = imx_clk_divider("ipu1_di1_pre",     "ipu1_di1_pre_sel",  base + 0x34, 12, 3);
 	clk[ipu2_di0_pre]     = imx_clk_divider("ipu2_di0_pre",     "ipu2_di0_pre_sel",  base + 0x38, 3,  3);

arch/arm/mach-imx/hotplug.c

@@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(void)
 	  : "cc");
 }
 
-static inline void cpu_leave_lowpower(void)
-{
-	unsigned int v;
-
-	asm volatile(
-		"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	orr	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C), "Ir" (0x40)
-	  : "cc");
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
@@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
 	imx_enable_cpu(cpu, false);
-	cpu_do_idle();
-	cpu_leave_lowpower();
 
-	/* We should never return from idle */
-	panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+	/* spin here until hardware takes it down */
+	while (1)
+		;
 }
 
 int platform_cpu_disable(unsigned int cpu)

arch/arm/mach-imx/mach-imx6q.c

@@ -71,7 +71,7 @@ void imx6q_restart(char mode, const char *cmd)
 /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
 static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 {
-	if (IS_ENABLED(CONFIG_PHYLIB)) {
+	if (IS_BUILTIN(CONFIG_PHYLIB)) {
 		/* min rx data delay */
 		phy_write(phydev, 0x0b, 0x8105);
 		phy_write(phydev, 0x0c, 0x0000);
@@ -112,7 +112,7 @@ static void __init imx6q_sabrelite_cko1_setup(void)
 
 static void __init imx6q_sabrelite_init(void)
 {
-	if (IS_ENABLED(CONFIG_PHYLIB))
+	if (IS_BUILTIN(CONFIG_PHYLIB))
 		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
 				ksz9021rn_phy_fixup);
 	imx6q_sabrelite_cko1_setup();

arch/arm/mach-kirkwood/Makefile.boot

@@ -7,7 +7,8 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
 dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
 dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
 dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
-dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-qnap-ts219.dtb
+dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-ts219-6281.dtb
+dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-ts219-6282.dtb
 dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
 dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
 dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb

arch/arm/mach-kirkwood/common.c

@@ -301,7 +301,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
-			IRQ_KIRKWOOD_GE00_ERR);
+			IRQ_KIRKWOOD_GE00_ERR, 1600);
 	/* The interface forgets the MAC address assigned by u-boot if
 	the clock is turned off, so claim the clk now. */
 	clk_prepare_enable(ge0);
@@ -315,7 +315,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge01_init(eth_data,
 			GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
-			IRQ_KIRKWOOD_GE01_ERR);
+			IRQ_KIRKWOOD_GE01_ERR, 1600);
 	clk_prepare_enable(ge1);
 }
 

arch/arm/mach-lpc32xx/irq.c

@@ -283,21 +283,25 @@ static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type)
 	case IRQ_TYPE_EDGE_RISING:
 		/* Rising edge sensitive */
 		__lpc32xx_set_irq_type(d->hwirq, 1, 1);
+		__irq_set_handler_locked(d->hwirq, handle_edge_irq);
 		break;
 
 	case IRQ_TYPE_EDGE_FALLING:
 		/* Falling edge sensitive */
 		__lpc32xx_set_irq_type(d->hwirq, 0, 1);
+		__irq_set_handler_locked(d->hwirq, handle_edge_irq);
 		break;
 
 	case IRQ_TYPE_LEVEL_LOW:
 		/* Low level sensitive */
 		__lpc32xx_set_irq_type(d->hwirq, 0, 0);
+		__irq_set_handler_locked(d->hwirq, handle_level_irq);
 		break;
 
 	case IRQ_TYPE_LEVEL_HIGH:
 		/* High level sensitive */
 		__lpc32xx_set_irq_type(d->hwirq, 1, 0);
+		__irq_set_handler_locked(d->hwirq, handle_level_irq);
 		break;
 
 	/* Other modes are not supported */
@@ -305,9 +309,6 @@ static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type)
 		return -EINVAL;
 	}
 
-	/* Ok to use the level handler for all types */
-	irq_set_handler(d->hwirq, handle_level_irq);
-
 	return 0;
 }
 

arch/arm/mach-lpc32xx/phy3250.c

@@ -37,6 +37,8 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/clk.h>
+#include <linux/mtd/lpc32xx_slc.h>
+#include <linux/mtd/lpc32xx_mlc.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -223,6 +225,14 @@ static struct mmci_platform_data lpc32xx_mmci_data = {
 	 * gather, and the MMCI driver doesn't do it this way */
 };
 
+static struct lpc32xx_slc_platform_data lpc32xx_slc_data = {
+	.dma_filter = pl08x_filter_id,
+};
+
+static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = {
+	.dma_filter = pl08x_filter_id,
+};
+
 static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", &lpc32xx_ssp0_data),
 	OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", &lpc32xx_ssp1_data),
@@ -230,6 +240,10 @@ static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd),
 	OF_DEV_AUXDATA("arm,pl18x", 0x20098000, "20098000.sd",
 		       &lpc32xx_mmci_data),
+	OF_DEV_AUXDATA("nxp,lpc3220-slc", 0x20020000, "20020000.flash",
+		       &lpc32xx_slc_data),
+	OF_DEV_AUXDATA("nxp,lpc3220-mlc", 0x200a8000, "200a8000.flash",
+		       &lpc32xx_mlc_data),
 	{ }
 };
 
@@ -253,12 +267,6 @@ static void __init lpc3250_machine_init(void)
 
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     lpc32xx_auxdata_lookup, NULL);
-
-	/* Register GPIOs used on this board */
-	if (gpio_request(MMC_PWR_ENABLE_GPIO, "mmc_power_en"))
-		pr_err("Error requesting gpio %u", MMC_PWR_ENABLE_GPIO);
-	else if (gpio_direction_output(MMC_PWR_ENABLE_GPIO, 1))
-		pr_err("Error setting gpio %u to output", MMC_PWR_ENABLE_GPIO);
 }
 
 static char const *lpc32xx_dt_compat[] __initdata = {

arch/arm/mach-mmp/sram.c

@@ -68,7 +68,7 @@ static int __devinit sram_probe(struct platform_device *pdev)
 	struct resource *res;
 	int ret = 0;
 
-	if (!pdata && !pdata->pool_name)
+	if (!pdata || !pdata->pool_name)
 		return -ENODEV;
 
 	info = kzalloc(sizeof(*info), GFP_KERNEL);

arch/arm/mach-mv78xx0/addr-map.c

@@ -37,7 +37,7 @@
 #define WIN0_OFF(n)		(BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
 #define WIN8_OFF(n)		(BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4))
 
-static void __init __iomem *win_cfg_base(int win)
+static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
 {
 	/*
 	 * Find the control register base address for this window.

arch/arm/mach-mv78xx0/common.c

@@ -213,7 +213,8 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM,
-			IRQ_MV78XX0_GE_ERR);
+			IRQ_MV78XX0_GE_ERR,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 
@@ -224,7 +225,8 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge01_init(eth_data,
 			GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
-			NO_IRQ);
+			NO_IRQ,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 

arch/arm/mach-omap2/Kconfig

@@ -62,13 +62,14 @@ config ARCH_OMAP4
 	select PM_OPP if PM
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select ARM_CPU_SUSPEND if PM
-	select ARCH_NEEDS_CPU_IDLE_COUPLED
+	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
 
 config SOC_OMAP5
 	bool "TI OMAP5"
 	select CPU_V7
 	select ARM_GIC
 	select HAVE_SMP
+	select ARM_CPU_SUSPEND if PM
 
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2

arch/arm/mach-omap2/board-igep0020.c

@@ -554,6 +554,8 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = {
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
+	OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #endif

arch/arm/mach-omap2/board-omap3evm.c

@@ -58,6 +58,7 @@
 #include "hsmmc.h"
 #include "common-board-devices.h"
 
+#define OMAP3_EVM_TS_GPIO	175
 #define OMAP3_EVM_EHCI_VBUS	22
 #define OMAP3_EVM_EHCI_SELECT	61
 

arch/arm/mach-omap2/common-board-devices.c

@@ -35,16 +35,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = {
 	.turbo_mode	= 0,
 };
 
-/*
- * ADS7846 driver maybe request a gpio according to the value
- * of pdata->get_pendown_state, but we have done this. So set
- * get_pendown_state to avoid twice gpio requesting.
- */
-static int omap3_get_pendown_state(void)
-{
-	return !gpio_get_value(OMAP3_EVM_TS_GPIO);
-}
-
 static struct ads7846_platform_data ads7846_config = {
 	.x_max			= 0x0fff,
 	.y_max			= 0x0fff,
@@ -55,7 +45,6 @@ static struct ads7846_platform_data ads7846_config = {
 	.debounce_rep		= 1,
 	.gpio_pendown		= -EINVAL,
 	.keep_vref_on		= 1,
-	.get_pendown_state	= &omap3_get_pendown_state,
 };
 
 static struct spi_board_info ads7846_spi_board_info __initdata = {

arch/arm/mach-omap2/common-board-devices.h

@@ -4,7 +4,6 @@
 #include "twl-common.h"
 
 #define NAND_BLOCK_SIZE	SZ_128K
-#define OMAP3_EVM_TS_GPIO	175
 
 struct mtd_partition;
 struct ads7846_platform_data;

arch/arm/mach-omap2/cpuidle44xx.c

@@ -238,8 +238,9 @@ int __init omap4_idle_init(void)
 	for_each_cpu(cpu_id, cpu_online_mask) {
 		dev = &per_cpu(omap4_idle_dev, cpu_id);
 		dev->cpu = cpu_id;
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
 		dev->coupled_cpus = *cpu_online_mask;
-
+#endif
 		cpuidle_register_driver(&omap4_idle_driver);
 
 		if (cpuidle_register_device(dev)) {

arch/arm/mach-omap2/mux.h

@@ -127,7 +127,6 @@ struct omap_mux_partition {
  * @gpio:	GPIO number
  * @muxnames:	available signal modes for a ball
  * @balls:	available balls on the package
- * @partition:	mux partition
  */
 struct omap_mux {
 	u16	reg_offset;

arch/arm/mach-omap2/opp4xxx_data.c

@@ -94,7 +94,7 @@ int __init omap4_opp_init(void)
 {
 	int r = -ENODEV;
 
-	if (!cpu_is_omap44xx())
+	if (!cpu_is_omap443x())
 		return r;
 
 	r = omap_init_opp_table(omap44xx_opp_def_list,

arch/arm/mach-omap2/pm34xx.c

@@ -272,21 +272,16 @@ void omap_sram_idle(void)
 	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
 	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
 
-	if (mpu_next_state < PWRDM_POWER_ON) {
-		pwrdm_pre_transition(mpu_pwrdm);
-		pwrdm_pre_transition(neon_pwrdm);
-	}
+	pwrdm_pre_transition(NULL);
 
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
-		pwrdm_pre_transition(per_pwrdm);
 		per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
 		omap2_gpio_prepare_for_idle(per_going_off);
 	}
 
 	/* CORE */
 	if (core_next_state < PWRDM_POWER_ON) {
-		pwrdm_pre_transition(core_pwrdm);
 		if (core_next_state == PWRDM_POWER_OFF) {
 			omap3_core_save_context();
 			omap3_cm_save_context();
@@ -339,20 +334,14 @@ void omap_sram_idle(void)
 			omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
 					       OMAP3430_GR_MOD,
 					       OMAP3_PRM_VOLTCTRL_OFFSET);
-		pwrdm_post_transition(core_pwrdm);
 	}
 	omap3_intc_resume_idle();
 
+	pwrdm_post_transition(NULL);
+
 	/* PER */
-	if (per_next_state < PWRDM_POWER_ON) {
+	if (per_next_state < PWRDM_POWER_ON)
 		omap2_gpio_resume_after_idle();
-		pwrdm_post_transition(per_pwrdm);
-	}
-
-	if (mpu_next_state < PWRDM_POWER_ON) {
-		pwrdm_post_transition(mpu_pwrdm);
-		pwrdm_post_transition(neon_pwrdm);
-	}
 }
 
 static void omap3_pm_idle(void)

arch/arm/mach-omap2/sleep44xx.S

@@ -56,9 +56,13 @@ ppa_por_params:
  * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET.
  * It returns to the caller for CPU INACTIVE and ON power states or in case
  * CPU failed to transition to targeted OFF/DORMANT state.
+ *
+ * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save
+ * stack frame and it expects the caller to take care of it. Hence the entire
+ * stack frame is saved to avoid possible stack corruption.
  */
 ENTRY(omap4_finish_suspend)
-	stmfd	sp!, {lr}
+	stmfd	sp!, {r4-r12, lr}
 	cmp	r0, #0x0
 	beq	do_WFI				@ No lowpower state, jump to WFI
 
@@ -226,7 +230,7 @@ scu_gp_clear:
 skip_scu_gp_clear:
 	isb
 	dsb
-	ldmfd	sp!, {pc}
+	ldmfd	sp!, {r4-r12, pc}
 ENDPROC(omap4_finish_suspend)
 
 /*

arch/arm/mach-omap2/twl-common.c

@@ -67,6 +67,7 @@ void __init omap_pmic_init(int bus, u32 clkrate,
 			   const char *pmic_type, int pmic_irq,
 			   struct twl4030_platform_data *pmic_data)
 {
+	omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
 	strncpy(pmic_i2c_board_info.type, pmic_type,
 		sizeof(pmic_i2c_board_info.type));
 	pmic_i2c_board_info.irq = pmic_irq;

arch/arm/mach-orion5x/common.c

@@ -109,7 +109,8 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM,
-			IRQ_ORION5X_ETH_ERR);
+			IRQ_ORION5X_ETH_ERR,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 

arch/arm/mach-s3c24xx/include/mach/dma.h

@@ -24,7 +24,8 @@
 */
 
 enum dma_ch {
-	DMACH_XD0,
+	DMACH_DT_PROP = -1,	/* not yet supported, do not use */
+	DMACH_XD0 = 0,
 	DMACH_XD1,
 	DMACH_SDI,
 	DMACH_SPI0,

arch/arm/mach-ux500/Kconfig

@@ -41,7 +41,6 @@ config MACH_HREFV60
 config MACH_SNOWBALL
 	bool "U8500 Snowball platform"
 	select MACH_MOP500
-	select LEDS_GPIO
 	help
 	  Include support for the snowball development platform.
 

arch/arm/mach-ux500/board-mop500-msp.c

@@ -191,9 +191,9 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent,
 	return pdev;
 }
 
-/* Platform device for ASoC U8500 machine */
-static struct platform_device snd_soc_u8500 = {
-		.name = "snd-soc-u8500",
+/* Platform device for ASoC MOP500 machine */
+static struct platform_device snd_soc_mop500 = {
+		.name = "snd-soc-mop500",
 		.id = 0,
 		.dev = {
 			.platform_data = NULL,
@@ -227,8 +227,8 @@ int mop500_msp_init(struct device *parent)
 {
 	struct platform_device *msp1;
 
-	pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__);
-	platform_device_register(&snd_soc_u8500);
+	pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
+	platform_device_register(&snd_soc_mop500);
 
 	pr_info("Initialize MSP I2S-devices.\n");
 	db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,

arch/arm/mach-ux500/board-mop500.c

@@ -797,6 +797,7 @@ static void __init u8500_init_machine(void)
 				ARRAY_SIZE(mop500_platform_devs));
 
 		mop500_sdi_init(parent);
+		mop500_msp_init(parent);
 		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
 		i2c_register_board_info(2, mop500_i2c2_devices,
@@ -804,6 +805,8 @@ static void __init u8500_init_machine(void)
 
 		mop500_uib_init();
 
+	} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
+		mop500_msp_init(parent);
 	} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
 		/*
 		 * The HREFv60 board removed a GPIO expander and routed
@@ -815,6 +818,7 @@ static void __init u8500_init_machine(void)
 				ARRAY_SIZE(mop500_platform_devs));
 
 		hrefv60_sdi_init(parent);
+		mop500_msp_init(parent);
 
 		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;

arch/arm/plat-omap/dmtimer.c

@@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void)
 		timer->reserved = 1;
 		break;
 	}
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (timer) {
 		ret = omap_dm_timer_prepare(timer);
@@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void)
 			timer = NULL;
 		}
 	}
-	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (!timer)
 		pr_debug("%s: timer request failed!\n", __func__);
@@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 			break;
 		}
 	}
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (timer) {
 		ret = omap_dm_timer_prepare(timer);
@@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 			timer = NULL;
 		}
 	}
-	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (!timer)
 		pr_debug("%s: timer%d request failed!\n", __func__, id);
@@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
 
 void omap_dm_timer_disable(struct omap_dm_timer *timer)
 {
-	pm_runtime_put(&timer->pdev->dev);
+	pm_runtime_put_sync(&timer->pdev->dev);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
 

arch/arm/plat-omap/include/plat/cpu.h

@@ -372,7 +372,8 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
 				cpu_is_omap16xx())
 #define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
-				cpu_is_omap44xx() || soc_is_omap54xx())
+				cpu_is_omap44xx() || soc_is_omap54xx() || \
+				soc_is_am33xx())
 
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024

arch/arm/plat-omap/include/plat/multi.h

@@ -108,4 +108,13 @@
 # endif
 #endif
 
+#ifdef CONFIG_SOC_AM33XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME am33xx
+# endif
+#endif
+
 #endif	/* __PLAT_OMAP_MULTI_H */

arch/arm/plat-omap/include/plat/uncompress.h

@@ -110,7 +110,7 @@ static inline void flush(void)
 	_DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT,	\
 		AM33XXUART##p)
 
-static inline void __arch_decomp_setup(unsigned long arch_id)
+static inline void arch_decomp_setup(void)
 {
 	int port = 0;
 
@@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 	} while (0);
 }
 
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-
 /*
  * nothing to do
  */

arch/arm/plat-orion/common.c

@@ -291,10 +291,12 @@ static struct platform_device orion_ge00 = {
 void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err)
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
+	orion_ge00_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge00_shared_data,
 		    orion_ge00_resources, irq, &orion_ge00_shared,
 		    eth_data, &orion_ge00);
@@ -343,10 +345,12 @@ static struct platform_device orion_ge01 = {
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err)
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
+	orion_ge01_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge01_shared_data,
 		    orion_ge01_resources, irq, &orion_ge01_shared,
 		    eth_data, &orion_ge01);

arch/arm/plat-orion/include/plat/common.h

@@ -39,12 +39,14 @@ void __init orion_rtc_init(unsigned long mapbase,
 void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err);
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit);
 
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err);
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit);
 
 void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,

arch/arm/plat-s3c24xx/dma.c

@@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
  * when necessary.
 */
 
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
+int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
 			dma_addr_t data, int size)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);

arch/arm/plat-samsung/devs.c

@@ -32,6 +32,8 @@
 #include <linux/platform_data/s3c-hsudc.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
+#include <media/s5p_hdmi.h>
+
 #include <asm/irq.h>
 #include <asm/pmu.h>
 #include <asm/mach/arch.h>
@@ -748,7 +750,8 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
 	if (!pd) {
 		pd = &default_i2c_data;
 
-		if (soc_is_exynos4210())
+		if (soc_is_exynos4210() ||
+		    soc_is_exynos4212() || soc_is_exynos4412())
 			pd->bus_num = 8;
 		else if (soc_is_s5pv210())
 			pd->bus_num = 3;
@@ -759,6 +762,30 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
 	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
 			       &s5p_device_i2c_hdmiphy);
 }
+
+struct s5p_hdmi_platform_data s5p_hdmi_def_platdata;
+
+void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
+				  struct i2c_board_info *mhl_info, int mhl_bus)
+{
+	struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata;
+
+	if (soc_is_exynos4210() ||
+	    soc_is_exynos4212() || soc_is_exynos4412())
+		pd->hdmiphy_bus = 8;
+	else if (soc_is_s5pv210())
+		pd->hdmiphy_bus = 3;
+	else
+		pd->hdmiphy_bus = 0;
+
+	pd->hdmiphy_info = hdmiphy_info;
+	pd->mhl_info = mhl_info;
+	pd->mhl_bus = mhl_bus;
+
+	s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data),
+			 &s5p_device_hdmi);
+}
+
 #endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */
 
 /* I2S */

arch/arm/plat-samsung/include/plat/hdmi.h

+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_HDMI_H
+#define __PLAT_SAMSUNG_HDMI_H __FILE__
+
+extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
+				  struct i2c_board_info *mhl_info, int mhl_bus);
+
+#endif /* __PLAT_SAMSUNG_HDMI_H */

arch/arm/plat-samsung/pm.c

@@ -74,7 +74,7 @@ unsigned char pm_uart_udivslot;
 
 #ifdef CONFIG_SAMSUNG_PM_DEBUG
 
-struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
+static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
 
 static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
 {

arch/mips/Kconfig

@@ -89,6 +89,7 @@ config ATH79
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
+	select HAVE_CLK
 	select IRQ_CPU
 	select MIPS_MACHINE
 	select SYS_HAS_CPU_MIPS32_R2

arch/mips/alchemy/board-mtx1.c

@@ -228,6 +228,8 @@ static int mtx1_pci_idsel(unsigned int devsel, int assert)
 	 * adapter on the mtx-1 "singleboard" variant. It triggers a custom
 	 * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals.
 	 */
+	udelay(1);
+
 	if (assert && devsel != 0)
 		/* Suppress signal to Cardbus */
 		alchemy_gpio_set_value(1, 0);	/* set EXT_IO3 OFF */

arch/mips/ath79/dev-usb.c

@@ -145,6 +145,8 @@ static void __init ar7240_usb_setup(void)
 
 	ath79_ohci_resources[0].start = AR7240_OHCI_BASE;
 	ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1;
+	ath79_ohci_resources[1].start = ATH79_CPU_IRQ_USB;
+	ath79_ohci_resources[1].end = ATH79_CPU_IRQ_USB;
 	platform_device_register(&ath79_ohci_device);
 }
 

arch/mips/ath79/gpio.c

@@ -188,8 +188,10 @@ void __init ath79_gpio_init(void)
 
 	if (soc_is_ar71xx())
 		ath79_gpio_count = AR71XX_GPIO_COUNT;
-	else if (soc_is_ar724x())
-		ath79_gpio_count = AR724X_GPIO_COUNT;
+	else if (soc_is_ar7240())
+		ath79_gpio_count = AR7240_GPIO_COUNT;
+	else if (soc_is_ar7241() || soc_is_ar7242())
+		ath79_gpio_count = AR7241_GPIO_COUNT;
 	else if (soc_is_ar913x())
 		ath79_gpio_count = AR913X_GPIO_COUNT;
 	else if (soc_is_ar933x())

arch/mips/bcm63xx/dev-spi.c

@@ -106,11 +106,15 @@ int __init bcm63xx_spi_register(void)
 	if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
 		spi_resources[0].end += BCM_6338_RSET_SPI_SIZE - 1;
 		spi_pdata.fifo_size = SPI_6338_MSG_DATA_SIZE;
+		spi_pdata.msg_type_shift = SPI_6338_MSG_TYPE_SHIFT;
+		spi_pdata.msg_ctl_width = SPI_6338_MSG_CTL_WIDTH;
 	}
 
 	if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
 		spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
 		spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
+		spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT;
+		spi_pdata.msg_ctl_width = SPI_6358_MSG_CTL_WIDTH;
 	}
 
 	bcm63xx_spi_regs_init();

arch/mips/cavium-octeon/octeon-irq.c

@@ -61,6 +61,12 @@ static void octeon_irq_set_ciu_mapping(int irq, int line, int bit,
 	octeon_irq_ciu_to_irq[line][bit] = irq;
 }
 
+static void octeon_irq_force_ciu_mapping(struct irq_domain *domain,
+					 int irq, int line, int bit)
+{
+	irq_domain_associate(domain, irq, line << 6 | bit);
+}
+
 static int octeon_coreid_for_cpu(int cpu)
 {
 #ifdef CONFIG_SMP
@@ -183,19 +189,9 @@ static void __init octeon_irq_init_core(void)
 		mutex_init(&cd->core_irq_mutex);
 
 		irq = OCTEON_IRQ_SW0 + i;
-		switch (irq) {
-		case OCTEON_IRQ_TIMER:
-		case OCTEON_IRQ_SW0:
-		case OCTEON_IRQ_SW1:
-		case OCTEON_IRQ_5:
-		case OCTEON_IRQ_PERF:
 		irq_set_chip_data(irq, cd);
 		irq_set_chip_and_handler(irq, &octeon_irq_chip_core,
 					 handle_percpu_irq);
-			break;
-		default:
-			break;
-		}
 	}
 }
 
@@ -890,7 +886,6 @@ static int octeon_irq_gpio_xlat(struct irq_domain *d,
 	unsigned int type;
 	unsigned int pin;
 	unsigned int trigger;
-	struct octeon_irq_gpio_domain_data *gpiod;
 
 	if (d->of_node != node)
 		return -EINVAL;
@@ -925,8 +920,7 @@ static int octeon_irq_gpio_xlat(struct irq_domain *d,
 		break;
 	}
 	*out_type = type;
-	gpiod = d->host_data;
-	*out_hwirq = gpiod->base_hwirq + pin;
+	*out_hwirq = pin;
 
 	return 0;
 }
@@ -996,19 +990,21 @@ static int octeon_irq_ciu_map(struct irq_domain *d,
 static int octeon_irq_gpio_map(struct irq_domain *d,
 			       unsigned int virq, irq_hw_number_t hw)
 {
-	unsigned int line = hw >> 6;
-	unsigned int bit = hw & 63;
+	struct octeon_irq_gpio_domain_data *gpiod = d->host_data;
+	unsigned int line, bit;
 
 	if (!octeon_irq_virq_in_range(virq))
 		return -EINVAL;
 
+	hw += gpiod->base_hwirq;
+	line = hw >> 6;
+	bit = hw & 63;
 	if (line > 1 || octeon_irq_ciu_to_irq[line][bit] != 0)
 		return -EINVAL;
 
 	octeon_irq_set_ciu_mapping(virq, line, bit,
 				   octeon_irq_gpio_chip,
 				   octeon_irq_handle_gpio);
-
 	return 0;
 }
 
@@ -1149,6 +1145,7 @@ static void __init octeon_irq_init_ciu(void)
 	struct irq_chip *chip_wd;
 	struct device_node *gpio_node;
 	struct device_node *ciu_node;
+	struct irq_domain *ciu_domain = NULL;
 
 	octeon_irq_init_ciu_percpu();
 	octeon_irq_setup_secondary = octeon_irq_setup_secondary_ciu;
@@ -1177,31 +1174,6 @@ static void __init octeon_irq_init_ciu(void)
 	/* Mips internal */
 	octeon_irq_init_core();
 
-	/* CIU_0 */
-	for (i = 0; i < 16; i++)
-		octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WORKQ0, 0, i + 0, chip, handle_level_irq);
-
-	octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq);
-	octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq);
-
-	for (i = 0; i < 4; i++)
-		octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_INT0, 0, i + 36, chip, handle_level_irq);
-	for (i = 0; i < 4; i++)
-		octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_MSI0, 0, i + 40, chip, handle_level_irq);
-
-	octeon_irq_set_ciu_mapping(OCTEON_IRQ_RML, 0, 46, chip, handle_level_irq);
-	for (i = 0; i < 4; i++)
-		octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_TIMER0, 0, i + 52, chip, handle_edge_irq);
-
-	octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB0, 0, 56, chip, handle_level_irq);
-	octeon_irq_set_ciu_mapping(OCTEON_IRQ_BOOTDMA, 0, 63, chip, handle_level_irq);
-
-	/* CIU_1 */
-	for (i = 0; i < 16; i++)
-		octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq);
-
-	octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB1, 1, 17, chip, handle_level_irq);
-
 	gpio_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-gpio");
 	if (gpio_node) {
 		struct octeon_irq_gpio_domain_data *gpiod;
@@ -1219,10 +1191,35 @@ static void __init octeon_irq_init_ciu(void)
 
 	ciu_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-ciu");
 	if (ciu_node) {
-		irq_domain_add_tree(ciu_node, &octeon_irq_domain_ciu_ops, NULL);
+		ciu_domain = irq_domain_add_tree(ciu_node, &octeon_irq_domain_ciu_ops, NULL);
 		of_node_put(ciu_node);
 	} else
-		pr_warn("Cannot find device node for cavium,octeon-3860-ciu.\n");
+		panic("Cannot find device node for cavium,octeon-3860-ciu.");
+
+	/* CIU_0 */
+	for (i = 0; i < 16; i++)
+		octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_WORKQ0, 0, i + 0);
+
+	octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq);
+	octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq);
+
+	for (i = 0; i < 4; i++)
+		octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_PCI_INT0, 0, i + 36);
+	for (i = 0; i < 4; i++)
+		octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_PCI_MSI0, 0, i + 40);
+
+	octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_RML, 0, 46);
+	for (i = 0; i < 4; i++)
+		octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_TIMER0, 0, i + 52);
+
+	octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB0, 0, 56);
+	octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_BOOTDMA, 0, 63);
+
+	/* CIU_1 */
+	for (i = 0; i < 16; i++)
+		octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq);
+
+	octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB1, 1, 17);
 
 	/* Enable the CIU lines */
 	set_c0_status(STATUSF_IP3 | STATUSF_IP2);

arch/mips/include/asm/mach-ath79/ar71xx_regs.h

@@ -393,7 +393,8 @@
 #define AR71XX_GPIO_REG_FUNC		0x28
 
 #define AR71XX_GPIO_COUNT		16
-#define AR724X_GPIO_COUNT		18
+#define AR7240_GPIO_COUNT		18
+#define AR7241_GPIO_COUNT		20
 #define AR913X_GPIO_COUNT		22
 #define AR933X_GPIO_COUNT		30
 #define AR934X_GPIO_COUNT		23

arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h

@@ -42,7 +42,6 @@
 #define cpu_has_mips64r1	0
 #define cpu_has_mips64r2	0
 
-#define cpu_has_dsp		0
 #define cpu_has_mipsmt		0
 
 #define cpu_has_64bits		0

arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h

@@ -9,6 +9,8 @@ int __init bcm63xx_spi_register(void);
 
 struct bcm63xx_spi_pdata {
 	unsigned int	fifo_size;
+	unsigned int	msg_type_shift;
+	unsigned int	msg_ctl_width;
 	int		bus_num;
 	int		num_chipselect;
 	u32		speed_hz;

arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h

@@ -1054,7 +1054,8 @@
 #define SPI_6338_FILL_BYTE		0x07
 #define SPI_6338_MSG_TAIL		0x09
 #define SPI_6338_RX_TAIL		0x0b
-#define SPI_6338_MSG_CTL		0x40
+#define SPI_6338_MSG_CTL		0x40	/* 8-bits register */
+#define SPI_6338_MSG_CTL_WIDTH		8
 #define SPI_6338_MSG_DATA		0x41
 #define SPI_6338_MSG_DATA_SIZE		0x3f
 #define SPI_6338_RX_DATA		0x80
@@ -1070,7 +1071,8 @@
 #define SPI_6348_FILL_BYTE		0x07
 #define SPI_6348_MSG_TAIL		0x09
 #define SPI_6348_RX_TAIL		0x0b
-#define SPI_6348_MSG_CTL		0x40
+#define SPI_6348_MSG_CTL		0x40	/* 8-bits register */
+#define SPI_6348_MSG_CTL_WIDTH		8
 #define SPI_6348_MSG_DATA		0x41
 #define SPI_6348_MSG_DATA_SIZE		0x3f
 #define SPI_6348_RX_DATA		0x80
@@ -1078,6 +1080,7 @@
 
 /* BCM 6358 SPI core */
 #define SPI_6358_MSG_CTL		0x00	/* 16-bits register */
+#define SPI_6358_MSG_CTL_WIDTH		16
 #define SPI_6358_MSG_DATA		0x02
 #define SPI_6358_MSG_DATA_SIZE		0x21e
 #define SPI_6358_RX_DATA		0x400
@@ -1094,6 +1097,7 @@
 
 /* BCM 6358 SPI core */
 #define SPI_6368_MSG_CTL		0x00	/* 16-bits register */
+#define SPI_6368_MSG_CTL_WIDTH		16
 #define SPI_6368_MSG_DATA		0x02
 #define SPI_6368_MSG_DATA_SIZE		0x21e
 #define SPI_6368_RX_DATA		0x400
@@ -1115,7 +1119,10 @@
 #define SPI_HD_W			0x01
 #define SPI_HD_R			0x02
 #define SPI_BYTE_CNT_SHIFT		0
-#define SPI_MSG_TYPE_SHIFT		14
+#define SPI_6338_MSG_TYPE_SHIFT		6
+#define SPI_6348_MSG_TYPE_SHIFT		6
+#define SPI_6358_MSG_TYPE_SHIFT		14
+#define SPI_6368_MSG_TYPE_SHIFT		14
 
 /* Command */
 #define SPI_CMD_NOOP			0x00

arch/mips/include/asm/mach-cavium-octeon/irq.h

@@ -21,14 +21,10 @@ enum octeon_irq {
 	OCTEON_IRQ_TIMER,
 /* sources in CIU_INTX_EN0 */
 	OCTEON_IRQ_WORKQ0,
-	OCTEON_IRQ_GPIO0 = OCTEON_IRQ_WORKQ0 + 16,
-	OCTEON_IRQ_WDOG0 = OCTEON_IRQ_GPIO0 + 16,
+	OCTEON_IRQ_WDOG0 = OCTEON_IRQ_WORKQ0 + 16,
 	OCTEON_IRQ_WDOG15 = OCTEON_IRQ_WDOG0 + 15,
 	OCTEON_IRQ_MBOX0 = OCTEON_IRQ_WDOG0 + 16,
 	OCTEON_IRQ_MBOX1,
-	OCTEON_IRQ_UART0,
-	OCTEON_IRQ_UART1,
-	OCTEON_IRQ_UART2,
 	OCTEON_IRQ_PCI_INT0,
 	OCTEON_IRQ_PCI_INT1,
 	OCTEON_IRQ_PCI_INT2,
@@ -38,8 +34,6 @@ enum octeon_irq {
 	OCTEON_IRQ_PCI_MSI2,
 	OCTEON_IRQ_PCI_MSI3,
 
-	OCTEON_IRQ_TWSI,
-	OCTEON_IRQ_TWSI2,
 	OCTEON_IRQ_RML,
 	OCTEON_IRQ_TIMER0,
 	OCTEON_IRQ_TIMER1,
@@ -47,8 +41,6 @@ enum octeon_irq {
 	OCTEON_IRQ_TIMER3,
 	OCTEON_IRQ_USB0,
 	OCTEON_IRQ_USB1,
-	OCTEON_IRQ_MII0,
-	OCTEON_IRQ_MII1,
 	OCTEON_IRQ_BOOTDMA,
 #ifndef CONFIG_PCI_MSI
 	OCTEON_IRQ_LAST = 127

arch/mips/include/asm/module.h

@@ -10,6 +10,7 @@ struct mod_arch_specific {
 	struct list_head dbe_list;
 	const struct exception_table_entry *dbe_start;
 	const struct exception_table_entry *dbe_end;
+	struct mips_hi16 *r_mips_hi16_list;
 };
 
 typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity.  */

arch/mips/include/asm/r4k-timer.h

@@ -12,16 +12,16 @@
 
 #ifdef CONFIG_SYNC_R4K
 
-extern void synchronise_count_master(void);
-extern void synchronise_count_slave(void);
+extern void synchronise_count_master(int cpu);
+extern void synchronise_count_slave(int cpu);
 
 #else
 
-static inline void synchronise_count_master(void)
+static inline void synchronise_count_master(int cpu)
 {
 }
 
-static inline void synchronise_count_slave(void)
+static inline void synchronise_count_slave(int cpu)
 {
 }
 

arch/mips/kernel/module.c

@@ -39,8 +39,6 @@ struct mips_hi16 {
 	Elf_Addr value;
 };
 
-static struct mips_hi16 *mips_hi16_list;
-
 static LIST_HEAD(dbe_list);
 static DEFINE_SPINLOCK(dbe_lock);
 
@@ -128,8 +126,8 @@ static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v)
 
 	n->addr = (Elf_Addr *)location;
 	n->value = v;
-	n->next = mips_hi16_list;
-	mips_hi16_list = n;
+	n->next = me->arch.r_mips_hi16_list;
+	me->arch.r_mips_hi16_list = n;
 
 	return 0;
 }
@@ -142,18 +140,28 @@ static int apply_r_mips_hi16_rela(struct module *me, u32 *location, Elf_Addr v)
 	return 0;
 }
 
+static void free_relocation_chain(struct mips_hi16 *l)
+{
+	struct mips_hi16 *next;
+
+	while (l) {
+		next = l->next;
+		kfree(l);
+		l = next;
+	}
+}
+
 static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v)
 {
 	unsigned long insnlo = *location;
+	struct mips_hi16 *l;
 	Elf_Addr val, vallo;
 
 	/* Sign extend the addend we extract from the lo insn.  */
 	vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
 
-	if (mips_hi16_list != NULL) {
-		struct mips_hi16 *l;
-
-		l = mips_hi16_list;
+	if (me->arch.r_mips_hi16_list != NULL) {
+		l = me->arch.r_mips_hi16_list;
 		while (l != NULL) {
 			struct mips_hi16 *next;
 			unsigned long insn;
@@ -188,7 +196,7 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v)
 			l = next;
 		}
 
-		mips_hi16_list = NULL;
+		me->arch.r_mips_hi16_list = NULL;
 	}
 
 	/*
@@ -201,6 +209,9 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v)
 	return 0;
 
 out_danger:
+	free_relocation_chain(l);
+	me->arch.r_mips_hi16_list = NULL;
+
 	pr_err("module %s: dangerous R_MIPS_LO16 REL relocation\n", me->name);
 
 	return -ENOEXEC;
@@ -273,6 +284,7 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
 	pr_debug("Applying relocate section %u to %u\n", relsec,
 	       sechdrs[relsec].sh_info);
 
+	me->arch.r_mips_hi16_list = NULL;
 	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
 		/* This is where to make the change */
 		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
@@ -296,6 +308,19 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
 			return res;
 	}
 
+	/*
+	 * Normally the hi16 list should be deallocated at this point.  A
+	 * malformed binary however could contain a series of R_MIPS_HI16
+	 * relocations not followed by a R_MIPS_LO16 relocation.  In that
+	 * case, free up the list and return an error.
+	 */
+	if (me->arch.r_mips_hi16_list) {
+		free_relocation_chain(me->arch.r_mips_hi16_list);
+		me->arch.r_mips_hi16_list = NULL;
+
+		return -ENOEXEC;
+	}
+
 	return 0;
 }
 

arch/mips/kernel/smp.c

@@ -130,7 +130,7 @@ asmlinkage __cpuinit void start_secondary(void)
 
 	cpu_set(cpu, cpu_callin_map);
 
-	synchronise_count_slave();
+	synchronise_count_slave(cpu);
 
 	/*
 	 * irq will be enabled in ->smp_finish(), enabling it too early
@@ -173,7 +173,6 @@ void smp_send_stop(void)
 void __init smp_cpus_done(unsigned int max_cpus)
 {
 	mp_ops->cpus_done();
-	synchronise_count_master();
 }
 
 /* called from main before smp_init() */
@@ -206,6 +205,7 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *tidle)
 	while (!cpu_isset(cpu, cpu_callin_map))
 		udelay(100);
 
+	synchronise_count_master(cpu);
 	return 0;
 }
 

arch/mips/kernel/sync-r4k.c

@@ -28,12 +28,11 @@ static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0);
 #define COUNTON	100
 #define NR_LOOPS 5
 
-void __cpuinit synchronise_count_master(void)
+void __cpuinit synchronise_count_master(int cpu)
 {
 	int i;
 	unsigned long flags;
 	unsigned int initcount;
-	int nslaves;
 
 #ifdef CONFIG_MIPS_MT_SMTC
 	/*
@@ -43,8 +42,7 @@ void __cpuinit synchronise_count_master(void)
 	return;
 #endif
 
-	printk(KERN_INFO "Synchronize counters across %u CPUs: ",
-	       num_online_cpus());
+	printk(KERN_INFO "Synchronize counters for CPU %u: ", cpu);
 
 	local_irq_save(flags);
 
@@ -52,7 +50,7 @@ void __cpuinit synchronise_count_master(void)
 	 * Notify the slaves that it's time to start
 	 */
 	atomic_set(&count_reference, read_c0_count());
-	atomic_set(&count_start_flag, 1);
+	atomic_set(&count_start_flag, cpu);
 	smp_wmb();
 
 	/* Count will be initialised to current timer for all CPU's */
@@ -69,10 +67,9 @@ void __cpuinit synchronise_count_master(void)
 	 * two CPUs.
 	 */
 
-	nslaves = num_online_cpus()-1;
 	for (i = 0; i < NR_LOOPS; i++) {
-		/* slaves loop on '!= ncpus' */
-		while (atomic_read(&count_count_start) != nslaves)
+		/* slaves loop on '!= 2' */
+		while (atomic_read(&count_count_start) != 1)
 			mb();
 		atomic_set(&count_count_stop, 0);
 		smp_wmb();
@@ -89,7 +86,7 @@ void __cpuinit synchronise_count_master(void)
 		/*
 		 * Wait for all slaves to leave the synchronization point:
 		 */
-		while (atomic_read(&count_count_stop) != nslaves)
+		while (atomic_read(&count_count_stop) != 1)
 			mb();
 		atomic_set(&count_count_start, 0);
 		smp_wmb();
@@ -97,6 +94,7 @@ void __cpuinit synchronise_count_master(void)
 	}
 	/* Arrange for an interrupt in a short while */
 	write_c0_compare(read_c0_count() + COUNTON);
+	atomic_set(&count_start_flag, 0);
 
 	local_irq_restore(flags);
 
@@ -108,11 +106,10 @@ void __cpuinit synchronise_count_master(void)
 	printk("done.\n");
 }
 
-void __cpuinit synchronise_count_slave(void)
+void __cpuinit synchronise_count_slave(int cpu)
 {
 	int i;
 	unsigned int initcount;
-	int ncpus;
 
 #ifdef CONFIG_MIPS_MT_SMTC
 	/*
@@ -127,16 +124,15 @@ void __cpuinit synchronise_count_slave(void)
 	 * so we first wait for the master to say everyone is ready
 	 */
 
-	while (!atomic_read(&count_start_flag))
+	while (atomic_read(&count_start_flag) != cpu)
 		mb();
 
 	/* Count will be initialised to next expire for all CPU's */
 	initcount = atomic_read(&count_reference);
 
-	ncpus = num_online_cpus();
 	for (i = 0; i < NR_LOOPS; i++) {
 		atomic_inc(&count_count_start);
-		while (atomic_read(&count_count_start) != ncpus)
+		while (atomic_read(&count_count_start) != 2)
 			mb();
 
 		/*
@@ -146,7 +142,7 @@ void __cpuinit synchronise_count_slave(void)
 			write_c0_count(initcount);
 
 		atomic_inc(&count_count_stop);
-		while (atomic_read(&count_count_stop) != ncpus)
+		while (atomic_read(&count_count_stop) != 2)
 			mb();
 	}
 	/* Arrange for an interrupt in a short while */

arch/mips/mti-malta/malta-pci.c

@@ -252,16 +252,3 @@ void __init mips_pcibios_init(void)
 
 	register_pci_controller(controller);
 }
-
-/* Enable PCI 2.1 compatibility in PIIX4 */
-static void __devinit quirk_dlcsetup(struct pci_dev *dev)
-{
-	u8 odlc, ndlc;
-	(void) pci_read_config_byte(dev, 0x82, &odlc);
-	/* Enable passive releases and delayed transaction */
-	ndlc = odlc | 7;
-	(void) pci_write_config_byte(dev, 0x82, ndlc);
-}
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
-	quirk_dlcsetup);

arch/mips/pci/pci-ar724x.c

@@ -23,9 +23,12 @@
 #define AR724X_PCI_MEM_BASE	0x10000000
 #define AR724X_PCI_MEM_SIZE	0x08000000
 
+#define AR724X_PCI_REG_RESET		0x18
 #define AR724X_PCI_REG_INT_STATUS	0x4c
 #define AR724X_PCI_REG_INT_MASK		0x50
 
+#define AR724X_PCI_RESET_LINK_UP	BIT(0)
+
 #define AR724X_PCI_INT_DEV0		BIT(14)
 
 #define AR724X_PCI_IRQ_COUNT		1
@@ -38,6 +41,15 @@ static void __iomem *ar724x_pci_ctrl_base;
 
 static u32 ar724x_pci_bar0_value;
 static bool ar724x_pci_bar0_is_cached;
+static bool ar724x_pci_link_up;
+
+static inline bool ar724x_pci_check_link(void)
+{
+	u32 reset;
+
+	reset = __raw_readl(ar724x_pci_ctrl_base + AR724X_PCI_REG_RESET);
+	return reset & AR724X_PCI_RESET_LINK_UP;
+}
 
 static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
 			    int size, uint32_t *value)
@@ -46,6 +58,9 @@ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
 	void __iomem *base;
 	u32 data;
 
+	if (!ar724x_pci_link_up)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
 	if (devfn)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
@@ -96,6 +111,9 @@ static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
 	u32 data;
 	int s;
 
+	if (!ar724x_pci_link_up)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
 	if (devfn)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
@@ -280,6 +298,10 @@ int __init ar724x_pcibios_init(int irq)
 	if (ar724x_pci_ctrl_base == NULL)
 		goto err_unmap_devcfg;
 
+	ar724x_pci_link_up = ar724x_pci_check_link();
+	if (!ar724x_pci_link_up)
+		pr_warn("ar724x: PCIe link is down\n");
+
 	ar724x_pci_irq_init(irq);
 	register_pci_controller(&ar724x_pci_controller);
 

arch/parisc/include/asm/atomic.h

@@ -141,7 +141,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
 
 #define atomic_sub_and_test(i,v)	(atomic_sub_return((i),(v)) == 0)
 
-#define ATOMIC_INIT(i)	((atomic_t) { (i) })
+#define ATOMIC_INIT(i)	{ (i) }
 
 #define smp_mb__before_atomic_dec()	smp_mb()
 #define smp_mb__after_atomic_dec()	smp_mb()
@@ -150,7 +150,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
 
 #ifdef CONFIG_64BIT
 
-#define ATOMIC64_INIT(i) ((atomic64_t) { (i) })
+#define ATOMIC64_INIT(i) { (i) }
 
 static __inline__ s64
 __atomic64_add_return(s64 i, atomic64_t *v)

arch/parisc/kernel/process.c

@@ -309,7 +309,7 @@ copy_thread(unsigned long clone_flags, unsigned long usp,
 		cregs->ksp = (unsigned long)stack
 			+ (pregs->gr[21] & (THREAD_SIZE - 1));
 		cregs->gr[30] = usp;
-		if (p->personality == PER_HPUX) {
+		if (personality(p->personality) == PER_HPUX) {
 #ifdef CONFIG_HPUX
 			cregs->kpc = (unsigned long) &hpux_child_return;
 #else

arch/parisc/kernel/sys_parisc.c

@@ -225,12 +225,12 @@ long parisc_personality(unsigned long personality)
 	long err;
 
 	if (personality(current->personality) == PER_LINUX32
-	    && personality == PER_LINUX)
-		personality = PER_LINUX32;
+	    && personality(personality) == PER_LINUX)
+		personality = (personality & ~PER_MASK) | PER_LINUX32;
 
 	err = sys_personality(personality);
-	if (err == PER_LINUX32)
-		err = PER_LINUX;
+	if (personality(err) == PER_LINUX32)
+		err = (err & ~PER_MASK) | PER_LINUX;
 
 	return err;
 }

arch/powerpc/boot/dts/fsl/p4080si-post.dtsi

@@ -345,6 +345,13 @@
 /include/ "qoriq-duart-1.dtsi"
 /include/ "qoriq-gpio-0.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
+	usb@210000 {
+		compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+		port0;
+	};
 /include/ "qoriq-usb2-dr-0.dtsi"
+	usb@211000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+	};
 /include/ "qoriq-sec4.0-0.dtsi"
 };

arch/powerpc/configs/85xx/p1023rds_defconfig

@@ -6,28 +6,27 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_AUDIT=y
-CONFIG_SPARSE_IRQ=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_EMBEDDED=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
 CONFIG_P1023_RDS=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 CONFIG_CPM2=y
-CONFIG_GPIO_MPC8XXX=y
 CONFIG_HIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
@@ -63,11 +62,11 @@ CONFIG_INET_ESP=y
 CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
@@ -80,15 +79,14 @@ CONFIG_SATA_FSL=y
 CONFIG_SATA_SIL24=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
+CONFIG_FS_ENET=y
+CONFIG_FSL_PQ_MDIO=y
+CONFIG_E1000E=y
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_FIXED_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_FS_ENET=y
-CONFIG_E1000E=y
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
@@ -98,16 +96,15 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
 CONFIG_SERIAL_QE=m
-CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 CONFIG_I2C=y
 CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
+CONFIG_GPIO_MPC8XXX=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_SOUND=y
@@ -123,7 +120,6 @@ CONFIG_DMADEVICES=y
 CONFIG_FSL_DMA=y
 # CONFIG_NET_DMA is not set
 CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
@@ -150,22 +146,15 @@ CONFIG_QNX4FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
 CONFIG_CRC_T10DIF=y
 CONFIG_FRAME_WARN=8092
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y

arch/powerpc/configs/corenet32_smp_defconfig

@@ -6,8 +6,8 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_AUDIT=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_RCU_TRACE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -21,23 +21,22 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
 CONFIG_P2041_RDB=y
 CONFIG_P3041_DS=y
 CONFIG_P4080_DS=y
 CONFIG_P5020_DS=y
 CONFIG_HIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_KEXEC=y
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_FORCE_MAX_ZONEORDER=13
-CONFIG_FSL_LBC=y
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_MSI=y
 # CONFIG_PCIEASPM is not set
+CONFIG_PCI_MSI=y
 CONFIG_RAPIDIO=y
 CONFIG_FSL_RIO=y
 CONFIG_NET=y
@@ -70,6 +69,7 @@ CONFIG_INET_IPCOMP=y
 CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
@@ -77,17 +77,14 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_FSL_IFC=y
 CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND_FSL_IFC=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_MISC_DEVICES=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
@@ -115,11 +112,9 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_PPC_EPAPR_HV_BYTECHAN=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -132,7 +127,6 @@ CONFIG_SPI_FSL_ESPI=y
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_USB_HID=m
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_FSL=y
@@ -142,8 +136,6 @@ CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_OF=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_MPC85XX=y
@@ -170,19 +162,16 @@ CONFIG_HUGETLBFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=m
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_RCU_TRACE=y
 CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_MD4=y

arch/powerpc/configs/corenet64_smp_defconfig

@@ -56,6 +56,7 @@ CONFIG_INET_ESP=y
 CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y

arch/powerpc/configs/g5_defconfig

+CONFIG_PPC64=y
+CONFIG_ALTIVEC=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_BLK_DEV_INITRD=y
@@ -13,15 +15,16 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=4
-CONFIG_KEXEC=y
-# CONFIG_RELOCATABLE is not set
+# CONFIG_PPC_PSERIES is not set
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_PMAC64=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
+# CONFIG_MIGRATION is not set
 CONFIG_PCI_MSI=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -49,6 +52,7 @@ CONFIG_NF_CT_NETLINK=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
@@ -56,6 +60,8 @@ CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
@@ -79,24 +85,33 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
-CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_IEEE1394=y
+CONFIG_IEEE1394_OHCI1394=y
+CONFIG_IEEE1394_SBP2=m
+CONFIG_IEEE1394_ETH1394=m
+CONFIG_IEEE1394_RAWIO=y
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_DV1394=m
+CONFIG_ADB_PMU=y
+CONFIG_PMAC_SMU=y
 CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_THERM_PM72=y
+CONFIG_WINDFARM=y
+CONFIG_WINDFARM_PM81=y
+CONFIG_WINDFARM_PM91=y
+CONFIG_WINDFARM_PM112=y
+CONFIG_WINDFARM_PM121=y
 CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
 CONFIG_DUMMY=m
-CONFIG_MII=y
+CONFIG_BONDING=m
 CONFIG_TUN=m
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SUNGEM=y
 CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
-CONFIG_TIGON3=y
 CONFIG_E1000=y
-CONFIG_SUNGEM=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
+CONFIG_TIGON3=y
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
@@ -106,24 +121,36 @@ CONFIG_USB_USBNET=m
 # CONFIG_USB_NET_NET1080 is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
+CONFIG_PPP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPPOE=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_JOYDEV=m
 CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 CONFIG_RAW_DRIVER=y
 CONFIG_I2C_CHARDEV=y
 # CONFIG_HWMON is not set
-CONFIG_AGP=y
-CONFIG_DRM=y
-CONFIG_DRM_NOUVEAU=y
+CONFIG_AGP=m
+CONFIG_AGP_UNINORTH=m
 CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_TILEBLITTING=y
+CONFIG_FB_OF=y
+CONFIG_FB_NVIDIA=y
+CONFIG_FB_NVIDIA_I2C=y
 CONFIG_FB_RADEON=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SND=m
@@ -131,7 +158,15 @@ CONFIG_SND_SEQUENCER=m
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_POWERMAC=m
+CONFIG_SND_AOA=m
+CONFIG_SND_AOA_FABRIC_LAYOUT=m
+CONFIG_SND_AOA_ONYX=m
+CONFIG_SND_AOA_TAS=m
+CONFIG_SND_AOA_TOONIE=m
 CONFIG_SND_USB_AUDIO=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
 CONFIG_HID_GYRATION=y
 CONFIG_LOGITECH_FF=y
 CONFIG_HID_PANTHERLORD=y
@@ -139,12 +174,13 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=y
 CONFIG_USB_STORAGE=y
@@ -208,6 +244,8 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_POSIX_ACL=y
+CONFIG_INOTIFY=y
+CONFIG_AUTOFS_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
@@ -221,12 +259,14 @@ CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
 CONFIG_CIFS=m
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_1250=y
 CONFIG_NLS_CODEPAGE_1251=y
@@ -234,23 +274,29 @@ CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=y
 CONFIG_NLS_UTF8=y
+CONFIG_CRC_T10DIF=y
+CONFIG_LIBCRC32C=m
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_LATENCYTOP=y
-CONFIG_STRICT_DEVMEM=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_BOOTX_TEXT=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
@@ -260,6 +306,3 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_VIRTUALIZATION is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=m

arch/powerpc/configs/mpc83xx_defconfig

@@ -2,12 +2,12 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_83xx=y
@@ -25,7 +25,6 @@ CONFIG_ASP834x=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 CONFIG_MATH_EMULATION=y
-CONFIG_SPARSE_IRQ=y
 CONFIG_PCI=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -42,10 +41,9 @@ CONFIG_INET_ESP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
@@ -64,15 +62,14 @@ CONFIG_ATA=y
 CONFIG_SATA_FSL=y
 CONFIG_SATA_SIL=y
 CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_UCC_GETH=y
+CONFIG_GIANFAR=y
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_ICPLUS_PHY=y
 CONFIG_FIXED_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_GIANFAR=y
-CONFIG_UCC_GETH=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
@@ -112,17 +109,12 @@ CONFIG_RTC_DRV_DS1374=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_INOTIFY=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_CRC_T10DIF=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_SHA256=y

arch/powerpc/configs/mpc85xx_defconfig

@@ -5,7 +5,9 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_AUDIT=y
-CONFIG_SPARSE_IRQ=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -17,6 +19,8 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
 CONFIG_MPC8540_ADS=y
 CONFIG_MPC8560_ADS=y
 CONFIG_MPC85xx_CDS=y
@@ -40,8 +44,6 @@ CONFIG_SBC8548=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 CONFIG_HIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
 CONFIG_FORCE_MAX_ZONEORDER=12
@@ -74,36 +76,25 @@ CONFIG_INET_ESP=y
 CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
 CONFIG_FTL=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_M25P80=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
@@ -115,6 +106,7 @@ CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_FSL=y
 CONFIG_PATA_ALI=y
+CONFIG_PATA_VIA=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
 CONFIG_FS_ENET=y
@@ -134,7 +126,6 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
@@ -183,7 +174,6 @@ CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_FSL=y
@@ -229,18 +219,13 @@ CONFIG_QNX4FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
 CONFIG_CRC_T10DIF=y
 CONFIG_DEBUG_FS=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y

arch/powerpc/configs/mpc85xx_smp_defconfig

@@ -7,7 +7,9 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_AUDIT=y
-CONFIG_SPARSE_IRQ=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -19,6 +21,8 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
 CONFIG_MPC8540_ADS=y
 CONFIG_MPC8560_ADS=y
 CONFIG_MPC85xx_CDS=y
@@ -42,8 +46,6 @@ CONFIG_SBC8548=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 CONFIG_HIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
 CONFIG_IRQ_ALL_CPUS=y
@@ -77,36 +79,25 @@ CONFIG_INET_ESP=y
 CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
 CONFIG_FTL=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_M25P80=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
@@ -137,7 +128,6 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
@@ -186,7 +176,6 @@ CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_FSL=y
@@ -232,18 +221,13 @@ CONFIG_QNX4FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
 CONFIG_CRC_T10DIF=y
 CONFIG_DEBUG_FS=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y

arch/powerpc/include/asm/cputable.h

@@ -553,9 +553,7 @@ static inline int cpu_has_feature(unsigned long feature)
 		& feature);
 }
 
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
 #define HBP_NUM 1
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
 
 #endif /* !__ASSEMBLY__ */
 

arch/powerpc/include/asm/kvm_host.h

@@ -33,6 +33,7 @@
 #include <asm/kvm_asm.h>
 #include <asm/processor.h>
 #include <asm/page.h>
+#include <asm/cacheflush.h>
 
 #define KVM_MAX_VCPUS		NR_CPUS
 #define KVM_MAX_VCORES		NR_CPUS

arch/powerpc/include/asm/kvm_ppc.h

@@ -219,4 +219,16 @@ void kvmppc_claim_lpid(long lpid);
 void kvmppc_free_lpid(long lpid);
 void kvmppc_init_lpid(unsigned long nr_lpids);
 
+static inline void kvmppc_mmu_flush_icache(pfn_t pfn)
+{
+	/* Clear i-cache for new pages */
+	struct page *page;
+	page = pfn_to_page(pfn);
+	if (!test_bit(PG_arch_1, &page->flags)) {
+		flush_dcache_icache_page(page);
+		set_bit(PG_arch_1, &page->flags);
+	}
+}
+
+
 #endif /* __POWERPC_KVM_PPC_H__ */

arch/powerpc/include/asm/mpic_msgr.h

@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/spinlock.h>
 #include <asm/smp.h>
+#include <asm/io.h>
 
 struct mpic_msgr {
 	u32 __iomem *base;

arch/powerpc/kernel/dma-iommu.c

@@ -83,11 +83,10 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask)
 		return 0;
 	}
 
-	if ((tbl->it_offset + tbl->it_size) > (mask >> IOMMU_PAGE_SHIFT)) {
-		dev_info(dev, "Warning: IOMMU window too big for device mask\n");
-		dev_info(dev, "mask: 0x%08llx, table end: 0x%08lx\n",
-				mask, (tbl->it_offset + tbl->it_size) <<
-				IOMMU_PAGE_SHIFT);
+	if (tbl->it_offset > (mask >> IOMMU_PAGE_SHIFT)) {
+		dev_info(dev, "Warning: IOMMU offset too big for device mask\n");
+		dev_info(dev, "mask: 0x%08llx, table offset: 0x%08lx\n",
+				mask, tbl->it_offset << IOMMU_PAGE_SHIFT);
 		return 0;
 	} else
 		return 1;

arch/powerpc/kernel/hw_breakpoint.c

@@ -253,7 +253,7 @@ int __kprobes hw_breakpoint_handler(struct die_args *args)
 
 	/* Do not emulate user-space instructions, instead single-step them */
 	if (user_mode(regs)) {
-		bp->ctx->task->thread.last_hit_ubp = bp;
+		current->thread.last_hit_ubp = bp;
 		regs->msr |= MSR_SE;
 		goto out;
 	}

arch/powerpc/kernel/kgdb.c

@@ -25,6 +25,7 @@
 #include <asm/processor.h>
 #include <asm/machdep.h>
 #include <asm/debug.h>
+#include <linux/slab.h>
 
 /*
  * This table contains the mapping between PowerPC hardware trap types, and
@@ -101,6 +102,21 @@ static int computeSignal(unsigned int tt)
 	return SIGHUP;		/* default for things we don't know about */
 }
 
+/**
+ *
+ *	kgdb_skipexception - Bail out of KGDB when we've been triggered.
+ *	@exception: Exception vector number
+ *	@regs: Current &struct pt_regs.
+ *
+ *	On some architectures we need to skip a breakpoint exception when
+ *	it occurs after a breakpoint has been removed.
+ *
+ */
+int kgdb_skipexception(int exception, struct pt_regs *regs)
+{
+	return kgdb_isremovedbreak(regs->nip);
+}
+
 static int kgdb_call_nmi_hook(struct pt_regs *regs)
 {
 	kgdb_nmicallback(raw_smp_processor_id(), regs);
@@ -138,6 +154,8 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs)
 static int kgdb_singlestep(struct pt_regs *regs)
 {
 	struct thread_info *thread_info, *exception_thread_info;
+	struct thread_info *backup_current_thread_info = \
+		(struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
 
 	if (user_mode(regs))
 		return 0;
@@ -155,13 +173,17 @@ static int kgdb_singlestep(struct pt_regs *regs)
 	thread_info = (struct thread_info *)(regs->gpr[1] & ~(THREAD_SIZE-1));
 	exception_thread_info = current_thread_info();
 
-	if (thread_info != exception_thread_info)
+	if (thread_info != exception_thread_info) {
+		/* Save the original current_thread_info. */
+		memcpy(backup_current_thread_info, exception_thread_info, sizeof *thread_info);
 		memcpy(exception_thread_info, thread_info, sizeof *thread_info);
+	}
 
 	kgdb_handle_exception(0, SIGTRAP, 0, regs);
 
 	if (thread_info != exception_thread_info)
-		memcpy(thread_info, exception_thread_info, sizeof *thread_info);
+		/* Restore current_thread_info lastly. */
+		memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info);
 
 	return 1;
 }
@@ -410,7 +432,6 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code,
 #else
 			linux_regs->msr |= MSR_SE;
 #endif
-			kgdb_single_step = 1;
 			atomic_set(&kgdb_cpu_doing_single_step,
 				   raw_smp_processor_id());
 		}

arch/powerpc/kernel/syscalls.c

@@ -107,11 +107,11 @@ long ppc64_personality(unsigned long personality)
 	long ret;
 
 	if (personality(current->personality) == PER_LINUX32
-	    && personality == PER_LINUX)
-		personality = PER_LINUX32;
+	    && personality(personality) == PER_LINUX)
+		personality = (personality & ~PER_MASK) | PER_LINUX32;
 	ret = sys_personality(personality);
-	if (ret == PER_LINUX32)
-		ret = PER_LINUX;
+	if (personality(ret) == PER_LINUX32)
+		ret = (ret & ~PER_MASK) | PER_LINUX;
 	return ret;
 }
 #endif

arch/powerpc/kvm/book3s_32_mmu_host.c

@@ -211,6 +211,9 @@ int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte)
 		pteg1 |= PP_RWRX;
 	}
 
+	if (orig_pte->may_execute)
+		kvmppc_mmu_flush_icache(hpaddr >> PAGE_SHIFT);
+
 	local_irq_disable();
 
 	if (pteg[rr]) {

arch/powerpc/kvm/book3s_64_mmu_host.c

@@ -126,6 +126,8 @@ int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte)
 
 	if (!orig_pte->may_execute)
 		rflags |= HPTE_R_N;
+	else
+		kvmppc_mmu_flush_icache(hpaddr >> PAGE_SHIFT);
 
 	hash = hpt_hash(va, PTE_SIZE, MMU_SEGSIZE_256M);
 

arch/powerpc/kvm/book3s_hv_rmhandlers.S

@@ -1421,13 +1421,13 @@ _GLOBAL(kvmppc_h_cede)
 	sync			/* order setting ceded vs. testing prodded */
 	lbz	r5,VCPU_PRODDED(r3)
 	cmpwi	r5,0
-	bne	1f
+	bne	kvm_cede_prodded
 	li	r0,0		/* set trap to 0 to say hcall is handled */
 	stw	r0,VCPU_TRAP(r3)
 	li	r0,H_SUCCESS
 	std	r0,VCPU_GPR(R3)(r3)
 BEGIN_FTR_SECTION
-	b	2f		/* just send it up to host on 970 */
+	b	kvm_cede_exit	/* just send it up to host on 970 */
 END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206)
 
 	/*
@@ -1446,7 +1446,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206)
 	or	r4,r4,r0
 	PPC_POPCNTW(R7,R4)
 	cmpw	r7,r8
-	bge	2f
+	bge	kvm_cede_exit
 	stwcx.	r4,0,r6
 	bne	31b
 	li	r0,1
@@ -1555,7 +1555,8 @@ kvm_end_cede:
 	b	hcall_real_fallback
 
 	/* cede when already previously prodded case */
-1:	li	r0,0
+kvm_cede_prodded:
+	li	r0,0
 	stb	r0,VCPU_PRODDED(r3)
 	sync			/* order testing prodded vs. clearing ceded */
 	stb	r0,VCPU_CEDED(r3)
@@ -1563,7 +1564,8 @@ kvm_end_cede:
 	blr
 
 	/* we've ceded but we want to give control to the host */
-2:	li	r3,H_TOO_HARD
+kvm_cede_exit:
+	li	r3,H_TOO_HARD
 	blr
 
 secondary_too_late:

arch/powerpc/kvm/e500_tlb.c

@@ -322,11 +322,11 @@ static inline void kvmppc_e500_ref_release(struct tlbe_ref *ref)
 static void clear_tlb1_bitmap(struct kvmppc_vcpu_e500 *vcpu_e500)
 {
 	if (vcpu_e500->g2h_tlb1_map)
-		memset(vcpu_e500->g2h_tlb1_map,
-		       sizeof(u64) * vcpu_e500->gtlb_params[1].entries, 0);
+		memset(vcpu_e500->g2h_tlb1_map, 0,
+		       sizeof(u64) * vcpu_e500->gtlb_params[1].entries);
 	if (vcpu_e500->h2g_tlb1_rmap)
-		memset(vcpu_e500->h2g_tlb1_rmap,
-		       sizeof(unsigned int) * host_tlb_params[1].entries, 0);
+		memset(vcpu_e500->h2g_tlb1_rmap, 0,
+		       sizeof(unsigned int) * host_tlb_params[1].entries);
 }
 
 static void clear_tlb_privs(struct kvmppc_vcpu_e500 *vcpu_e500)
@@ -539,6 +539,9 @@ static inline void kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500,
 
 	kvmppc_e500_setup_stlbe(&vcpu_e500->vcpu, gtlbe, tsize,
 				ref, gvaddr, stlbe);
+
+	/* Clear i-cache for new pages */
+	kvmppc_mmu_flush_icache(pfn);
 }
 
 /* XXX only map the one-one case, for now use TLB0 */

arch/powerpc/lib/copyuser_power7.S

@@ -288,7 +288,7 @@ err1;	stb	r0,0(r3)
 	std	r0,16(r1)
 	stdu	r1,-STACKFRAMESIZE(r1)
 	bl	.enter_vmx_usercopy
-	cmpwi	r3,0
+	cmpwi	cr1,r3,0
 	ld	r0,STACKFRAMESIZE+16(r1)
 	ld	r3,STACKFRAMESIZE+48(r1)
 	ld	r4,STACKFRAMESIZE+56(r1)
@@ -326,38 +326,7 @@ err1;	stb	r0,0(r3)
 	dcbt	r0,r8,0b01010	/* GO */
 .machine pop
 
-	/*
-	 * We prefetch both the source and destination using enhanced touch
-	 * instructions. We use a stream ID of 0 for the load side and
-	 * 1 for the store side.
-	 */
-	clrrdi	r6,r4,7
-	clrrdi	r9,r3,7
-	ori	r9,r9,1		/* stream=1 */
-
-	srdi	r7,r5,7		/* length in cachelines, capped at 0x3FF */
-	cmpldi	cr1,r7,0x3FF
-	ble	cr1,1f
-	li	r7,0x3FF
-1:	lis	r0,0x0E00	/* depth=7 */
-	sldi	r7,r7,7
-	or	r7,r7,r0
-	ori	r10,r7,1	/* stream=1 */
-
-	lis	r8,0x8000	/* GO=1 */
-	clrldi	r8,r8,32
-
-.machine push
-.machine "power4"
-	dcbt	r0,r6,0b01000
-	dcbt	r0,r7,0b01010
-	dcbtst	r0,r9,0b01000
-	dcbtst	r0,r10,0b01010
-	eieio
-	dcbt	r0,r8,0b01010	/* GO */
-.machine pop
-
-	beq	.Lunwind_stack_nonvmx_copy
+	beq	cr1,.Lunwind_stack_nonvmx_copy
 
 	/*
 	 * If source and destination are not relatively aligned we use a

arch/powerpc/lib/memcpy_power7.S

@@ -222,7 +222,7 @@ _GLOBAL(memcpy_power7)
 	std	r0,16(r1)
 	stdu	r1,-STACKFRAMESIZE(r1)
 	bl	.enter_vmx_copy
-	cmpwi	r3,0
+	cmpwi	cr1,r3,0
 	ld	r0,STACKFRAMESIZE+16(r1)
 	ld	r3,STACKFRAMESIZE+48(r1)
 	ld	r4,STACKFRAMESIZE+56(r1)
@@ -260,7 +260,7 @@ _GLOBAL(memcpy_power7)
 	dcbt	r0,r8,0b01010	/* GO */
 .machine pop
 
-	beq	.Lunwind_stack_nonvmx_copy
+	beq	cr1,.Lunwind_stack_nonvmx_copy
 
 	/*
 	 * If source and destination are not relatively aligned we use a

arch/powerpc/mm/mem.c

@@ -469,6 +469,7 @@ void flush_dcache_icache_page(struct page *page)
 	__flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT);
 #endif
 }
+EXPORT_SYMBOL(flush_dcache_icache_page);
 
 void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
 {

arch/powerpc/perf/core-book3s.c

@@ -1431,7 +1431,7 @@ static void perf_event_interrupt(struct pt_regs *regs)
 		if (!event->hw.idx || is_limited_pmc(event->hw.idx))
 			continue;
 		val = read_pmc(event->hw.idx);
-		if ((int)val < 0) {
+		if (pmc_overflow(val)) {
 			/* event has overflowed */
 			found = 1;
 			record_and_restart(event, val, regs);

arch/powerpc/sysdev/fsl_pci.c

@@ -465,7 +465,7 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
 			iounmap(hose->cfg_data);
 		iounmap(hose->cfg_addr);
 		pcibios_free_controller(hose);
-		return 0;
+		return -ENODEV;
 	}
 
 	setup_pci_cmd(hose);
@@ -827,6 +827,7 @@ struct device_node *fsl_pci_primary;
 
 void __devinit fsl_pci_init(void)
 {
+	int ret;
 	struct device_node *node;
 	struct pci_controller *hose;
 	dma_addr_t max = 0xffffffff;
@@ -855,12 +856,14 @@ void __devinit fsl_pci_init(void)
 			if (!fsl_pci_primary)
 				fsl_pci_primary = node;
 
-			fsl_add_bridge(node, fsl_pci_primary == node);
+			ret = fsl_add_bridge(node, fsl_pci_primary == node);
+			if (ret == 0) {
 				hose = pci_find_hose_for_OF_device(node);
 				max = min(max, hose->dma_window_base_cur +
 						hose->dma_window_size);
 			}
 		}
+	}
 
 #ifdef CONFIG_SWIOTLB
 	/*

arch/powerpc/sysdev/mpic_msgr.c

@@ -14,6 +14,9 @@
 #include <linux/list.h>
 #include <linux/of_platform.h>
 #include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/slab.h>
 #include <asm/prom.h>
 #include <asm/hw_irq.h>
 #include <asm/ppc-pci.h>