Merge branch 'misc' into release

Conflicts:
	arch/x86/kernel/process.c
Signed-off-by: NLen Brown <len.brown@intel.com>

Documentation/kernel-parameters.txt

@@ -1039,16 +1039,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Claim all unknown PCI IDE storage controllers.
 
 	idle=		[X86]
-			Format: idle=poll, idle=mwait, idle=halt, idle=nomwait
+			Format: idle=poll, idle=halt, idle=nomwait
 			Poll forces a polling idle loop that can slightly
 			improve the performance of waking up a idle CPU, but
 			will use a lot of power and make the system run hot.
 			Not recommended.
-			idle=mwait: On systems which support MONITOR/MWAIT but
-			the kernel chose to not use it because it doesn't save
-			as much power as a normal idle loop, use the
-			MONITOR/MWAIT idle loop anyways. Performance should be
-			the same as idle=poll.
 			idle=halt: Halt is forced to be used for CPU idle.
 			In such case C2/C3 won't be used again.
 			idle=nomwait: Disable mwait for CPU C-states
@@ -1886,10 +1881,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			wfi(ARM) instruction doesn't work correctly and not to
 			use it. This is also useful when using JTAG debugger.
 
-	no-hlt		[BUGS=X86-32] Tells the kernel that the hlt
-			instruction doesn't work correctly and not to
-			use it.
-
 	no_file_caps	Tells the kernel not to honor file capabilities.  The
 			only way then for a file to be executed with privilege
 			is to be setuid root or executed by root.

arch/x86/include/asm/processor.h

@@ -89,7 +89,6 @@ struct cpuinfo_x86 {
 	char			wp_works_ok;	/* It doesn't on 386's */
 
 	/* Problems on some 486Dx4's and old 386's: */
-	char			hlt_works_ok;
 	char			hard_math;
 	char			rfu;
 	char			fdiv_bug;
@@ -165,15 +164,6 @@ DECLARE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
 
 extern const struct seq_operations cpuinfo_op;
 
-static inline int hlt_works(int cpu)
-{
-#ifdef CONFIG_X86_32
-	return cpu_data(cpu).hlt_works_ok;
-#else
-	return 1;
-#endif
-}
-
 #define cache_line_size()	(boot_cpu_data.x86_cache_alignment)
 
 extern void cpu_detect(struct cpuinfo_x86 *c);
@@ -725,7 +715,7 @@ extern unsigned long		boot_option_idle_override;
 extern bool			amd_e400_c1e_detected;
 
 enum idle_boot_override {IDLE_NO_OVERRIDE=0, IDLE_HALT, IDLE_NOMWAIT,
-			 IDLE_POLL, IDLE_FORCE_MWAIT};
+			 IDLE_POLL};
 
 extern void enable_sep_cpu(void);
 extern int sysenter_setup(void);
@@ -998,7 +988,11 @@ extern unsigned long arch_align_stack(unsigned long sp);
 extern void free_init_pages(char *what, unsigned long begin, unsigned long end);
 
 void default_idle(void);
-bool set_pm_idle_to_default(void);
+#ifdef	CONFIG_XEN
+bool xen_set_default_idle(void);
+#else
+#define xen_set_default_idle 0
+#endif
 
 void stop_this_cpu(void *dummy);
 

arch/x86/kernel/cpu/bugs.c

@@ -17,15 +17,6 @@
 #include <asm/paravirt.h>
 #include <asm/alternative.h>
 
-static int __init no_halt(char *s)
-{
-	WARN_ONCE(1, "\"no-hlt\" is deprecated, please use \"idle=poll\"\n");
-	boot_cpu_data.hlt_works_ok = 0;
-	return 1;
-}
-
-__setup("no-hlt", no_halt);
-
 static int __init no_387(char *s)
 {
 	boot_cpu_data.hard_math = 0;
@@ -89,23 +80,6 @@ static void __init check_fpu(void)
 		pr_warn("Hmm, FPU with FDIV bug\n");
 }
 
-static void __init check_hlt(void)
-{
-	if (boot_cpu_data.x86 >= 5 || paravirt_enabled())
-		return;
-
-	pr_info("Checking 'hlt' instruction... ");
-	if (!boot_cpu_data.hlt_works_ok) {
-		pr_cont("disabled\n");
-		return;
-	}
-	halt();
-	halt();
-	halt();
-	halt();
-	pr_cont("OK\n");
-}
-
 /*
  * Check whether we are able to run this kernel safely on SMP.
  *
@@ -129,7 +103,6 @@ void __init check_bugs(void)
 	print_cpu_info(&boot_cpu_data);
 #endif
 	check_config();
-	check_hlt();
 	init_utsname()->machine[1] =
 		'0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86);
 	alternative_instructions();

arch/x86/kernel/cpu/proc.c

@@ -28,7 +28,6 @@ static void show_cpuinfo_misc(struct seq_file *m, struct cpuinfo_x86 *c)
 {
 	seq_printf(m,
 		   "fdiv_bug\t: %s\n"
-		   "hlt_bug\t\t: %s\n"
 		   "f00f_bug\t: %s\n"
 		   "coma_bug\t: %s\n"
 		   "fpu\t\t: %s\n"
@@ -36,7 +35,6 @@ static void show_cpuinfo_misc(struct seq_file *m, struct cpuinfo_x86 *c)
 		   "cpuid level\t: %d\n"
 		   "wp\t\t: %s\n",
 		   c->fdiv_bug ? "yes" : "no",
-		   c->hlt_works_ok ? "no" : "yes",
 		   c->f00f_bug ? "yes" : "no",
 		   c->coma_bug ? "yes" : "no",
 		   c->hard_math ? "yes" : "no",

arch/x86/kernel/process.c

@@ -390,7 +390,8 @@ void default_idle(void)
 EXPORT_SYMBOL(default_idle);
 #endif
 
-bool set_pm_idle_to_default(void)
+#ifdef CONFIG_XEN
+bool xen_set_default_idle(void)
 {
 	bool ret = !!x86_idle;
 
@@ -398,6 +399,7 @@ bool set_pm_idle_to_default(void)
 
 	return ret;
 }
+#endif
 void stop_this_cpu(void *dummy)
 {
 	local_irq_disable();
@@ -407,31 +409,8 @@ void stop_this_cpu(void *dummy)
 	set_cpu_online(smp_processor_id(), false);
 	disable_local_APIC();
 
-	for (;;) {
-		if (hlt_works(smp_processor_id()))
+	for (;;)
 		halt();
-	}
-}
-
-/* Default MONITOR/MWAIT with no hints, used for default C1 state */
-static void mwait_idle(void)
-{
-	if (!need_resched()) {
-		trace_power_start_rcuidle(POWER_CSTATE, 1, smp_processor_id());
-		trace_cpu_idle_rcuidle(1, smp_processor_id());
-		if (this_cpu_has(X86_FEATURE_CLFLUSH_MONITOR))
-			clflush((void *)&current_thread_info()->flags);
-
-		__monitor((void *)&current_thread_info()->flags, 0, 0);
-		smp_mb();
-		if (!need_resched())
-			__sti_mwait(0, 0);
-		else
-			local_irq_enable();
-		trace_power_end_rcuidle(smp_processor_id());
-		trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
-	} else
-		local_irq_enable();
 }
 
 /*
@@ -450,53 +429,6 @@ static void poll_idle(void)
 	trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
 }
 
-/*
- * mwait selection logic:
- *
- * It depends on the CPU. For AMD CPUs that support MWAIT this is
- * wrong. Family 0x10 and 0x11 CPUs will enter C1 on HLT. Powersavings
- * then depend on a clock divisor and current Pstate of the core. If
- * all cores of a processor are in halt state (C1) the processor can
- * enter the C1E (C1 enhanced) state. If mwait is used this will never
- * happen.
- *
- * idle=mwait overrides this decision and forces the usage of mwait.
- */
-
-#define MWAIT_INFO			0x05
-#define MWAIT_ECX_EXTENDED_INFO		0x01
-#define MWAIT_EDX_C1			0xf0
-
-int mwait_usable(const struct cpuinfo_x86 *c)
-{
-	u32 eax, ebx, ecx, edx;
-
-	/* Use mwait if idle=mwait boot option is given */
-	if (boot_option_idle_override == IDLE_FORCE_MWAIT)
-		return 1;
-
-	/*
-	 * Any idle= boot option other than idle=mwait means that we must not
-	 * use mwait. Eg: idle=halt or idle=poll or idle=nomwait
-	 */
-	if (boot_option_idle_override != IDLE_NO_OVERRIDE)
-		return 0;
-
-	if (c->cpuid_level < MWAIT_INFO)
-		return 0;
-
-	cpuid(MWAIT_INFO, &eax, &ebx, &ecx, &edx);
-	/* Check, whether EDX has extended info about MWAIT */
-	if (!(ecx & MWAIT_ECX_EXTENDED_INFO))
-		return 1;
-
-	/*
-	 * edx enumeratios MONITOR/MWAIT extensions. Check, whether
-	 * C1  supports MWAIT
-	 */
-	return (edx & MWAIT_EDX_C1);
-}
-
 bool amd_e400_c1e_detected;
 EXPORT_SYMBOL(amd_e400_c1e_detected);
 
@@ -567,13 +499,7 @@ void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
 	if (x86_idle)
 		return;
 
-	if (cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c)) {
-		/*
-		 * One CPU supports mwait => All CPUs supports mwait
-		 */
-		pr_info("using mwait in idle threads\n");
-		x86_idle = mwait_idle;
-	} else if (cpu_has_amd_erratum(amd_erratum_400)) {
+	if (cpu_has_amd_erratum(amd_erratum_400)) {
 		/* E400: APIC timer interrupt does not wake up CPU from C1e */
 		pr_info("using AMD E400 aware idle routine\n");
 		x86_idle = amd_e400_idle;
@@ -597,9 +523,6 @@ static int __init idle_setup(char *str)
 		pr_info("using polling idle threads\n");
 		x86_idle = poll_idle;
 		boot_option_idle_override = IDLE_POLL;
-	} else if (!strcmp(str, "mwait")) {
-		boot_option_idle_override = IDLE_FORCE_MWAIT;
-		WARN_ONCE(1, "\"idle=mwait\" will be removed in 2012\n");
 	} else if (!strcmp(str, "halt")) {
 		/*
 		 * When the boot option of idle=halt is added, halt is

arch/x86/kernel/smpboot.c

@@ -1369,7 +1369,7 @@ static inline void mwait_play_dead(void)
 	void *mwait_ptr;
 	struct cpuinfo_x86 *c = __this_cpu_ptr(&cpu_info);
 
-	if (!(this_cpu_has(X86_FEATURE_MWAIT) && mwait_usable(c)))
+	if (!this_cpu_has(X86_FEATURE_MWAIT))
 		return;
 	if (!this_cpu_has(X86_FEATURE_CLFLSH))
 		return;

arch/x86/xen/setup.c

@@ -556,12 +556,9 @@ void __init xen_arch_setup(void)
 	       COMMAND_LINE_SIZE : MAX_GUEST_CMDLINE);
 
 	/* Set up idle, making sure it calls safe_halt() pvop */
-#ifdef CONFIG_X86_32
-	boot_cpu_data.hlt_works_ok = 1;
-#endif
 	disable_cpuidle();
 	disable_cpufreq();
-	WARN_ON(set_pm_idle_to_default());
+	WARN_ON(xen_set_default_idle());
 	fiddle_vdso();
 #ifdef CONFIG_NUMA
 	numa_off = 1;

drivers/acpi/processor_idle.c

@@ -71,7 +71,6 @@ static struct acpi_processor_cx *acpi_cstate[CPUIDLE_STATE_MAX];
 static int disabled_by_idle_boot_param(void)
 {
 	return boot_option_idle_override == IDLE_POLL ||
-		boot_option_idle_override == IDLE_FORCE_MWAIT ||
 		boot_option_idle_override == IDLE_HALT;
 }