From c7a8a11c6bb78f49895d42294a88002ea544922f Mon Sep 17 00:00:00 2001
From: Huang Shijie <b32955@freescale.com>
Date: Mon, 24 Feb 2014 18:37:41 +0800
Subject: [PATCH] Documentation: add the binding file for Freescale QuadSPI
driver
This patch adds the binding file for Freescale QuadSPI driver.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
.../devicetree/bindings/mtd/fsl-quadspi.txt | 35 +++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
new file mode 100644
index 000000000000..823d13412195
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
@@ -0,0 +1,35 @@
+* Freescale Quad Serial Peripheral Interface(QuadSPI)
+
+Required properties:
+ - compatible : Should be "fsl,vf610-qspi"
+ - reg : the first contains the register location and length,
+ the second contains the memory mapping address and length
+ - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
+ - interrupts : Should contain the interrupt for the device
+ - clocks : The clocks needed by the QuadSPI controller
+ - clock-names : the name of the clocks
+
+Optional properties:
+ - fsl,qspi-has-second-chip: The controller has two buses, bus A and bus B.
+ Each bus can be connected with two NOR flashes.
+ Most of the time, each bus only has one NOR flash
+ connected, this is the default case.
+ But if there are two NOR flashes connected to the
+ bus, you should enable this property.
+ (Please check the board's schematic.)
+
+Example:
+
+qspi0: quadspi@40044000 {
+ compatible = "fsl,vf610-qspi";
+ reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_QSPI0_EN>,
+ <&clks VF610_CLK_QSPI0>;
+ clock-names = "qspi_en", "qspi";
+
+ flash0: s25fl128s@0 {
+ ....
+ };
+};
--
GitLab