Merge branch 'omap/cleanup' into next/cleanup2

Documentation/devicetree/bindings/arm/omap/dsp.txt

+* TI - DSP (Digital Signal Processor)
+
+TI DSP included in OMAP SoC
+
+Required properties:
+- compatible : Should be "ti,omap3-c64" for OMAP3 & 4
+- ti,hwmods: "dsp"
+
+Examples:
+
+dsp {
+    compatible = "ti,omap3-c64";
+    ti,hwmods = "dsp";
+};

Documentation/devicetree/bindings/arm/omap/iva.txt

+* TI - IVA (Imaging and Video Accelerator) subsystem
+
+The IVA contain various audio, video or imaging HW accelerator
+depending of the version.
+
+Required properties:
+- compatible : Should be:
+  - "ti,ivahd" for OMAP4
+  - "ti,iva2.2" for OMAP3
+  - "ti,iva2.1" for OMAP2430
+  - "ti,iva1" for OMAP2420
+- ti,hwmods: "iva"
+
+Examples:
+
+iva {
+    compatible = "ti,ivahd", "ti,iva";
+    ti,hwmods = "iva";
+};

Documentation/devicetree/bindings/arm/omap/l3-noc.txt

+* TI - L3 Network On Chip (NoC)
+
+This version is an implementation of the generic NoC IP
+provided by Arteris.
+
+Required properties:
+- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
+               Should be "ti,omap4-l3-noc" for OMAP4 family
+- ti,hwmods: "l3_main_1", ... One hwmod for each noc domain.
+
+Examples:
+
+ocp {
+	compatible = "ti,omap4-l3-noc", "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+};

Documentation/devicetree/bindings/arm/omap/mpu.txt

+* TI - MPU (Main Processor Unit) subsystem
+
+The MPU subsystem contain one or several ARM cores
+depending of the version.
+The MPU contain CPUs, GIC, L2 cache and a local PRCM.
+
+Required properties:
+- compatible : Should be "ti,omap3-mpu" for OMAP3
+               Should be "ti,omap4-mpu" for OMAP4
+- ti,hwmods: "mpu"
+
+Examples:
+
+- For an OMAP4 SMP system:
+
+mpu {
+    compatible = "ti,omap4-mpu";
+    ti,hwmods = "mpu";
+};
+
+
+- For an OMAP3 monocore system:
+
+mpu {
+    compatible = "ti,omap3-mpu";
+    ti,hwmods = "mpu";
+};

Documentation/devicetree/bindings/arm/omap/omap.txt

+* Texas Instruments OMAP
+
+OMAP is currently using a static file per SoC family to describe the
+IPs present in the SoC.
+On top of that an omap_device is created to extend the platform_device
+capabilities and to allow binding with one or several hwmods.
+The hwmods will contain all the information to build the device:
+adresse range, irq lines, dma lines, interconnect, PRCM register,
+clock domain, input clocks.
+For the moment just point to the existing hwmod, the next step will be
+to move data from hwmod to device-tree representation.
+
+
+Required properties:
+- compatible: Every devices present in OMAP SoC should be in the
+  form: "ti,XXX"
+- ti,hwmods: list of hwmod names (ascii strings), that comes from the OMAP
+  HW documentation, attached to a device. Must contain at least
+  one hwmod.
+
+Optional properties:
+- ti,no_idle_on_suspend: When present, it prevents the PM to idle the module
+  during suspend.
+
+
+Example:
+
+spinlock@1 {
+    compatible = "ti,omap4-spinlock";
+    ti,hwmods = "spinlock";
+};
+
+
+Boards:
+
+- OMAP3 BeagleBoard : Low cost community board
+  compatible = "ti,omap3-beagle", "ti,omap3"
+
+- OMAP4 SDP : Software Developement Board
+  compatible = "ti,omap4-sdp", "ti,omap4430"
+
+- OMAP4 PandaBoard : Low cost community board
+  compatible = "ti,omap4-panda", "ti,omap4430"

arch/arm/boot/dts/omap3-beagle.dts

+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+	model = "TI OMAP3 BeagleBoard";
+	compatible = "ti,omap3-beagle", "ti,omap3";
+
+	/*
+	 * Since the initial device tree board file does not create any
+	 * devices (MMC, network...), the only way to boot is to provide a
+	 * ramdisk.
+	 */
+	chosen {
+		bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+};

arch/arm/boot/dts/omap3.dtsi

+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "ti,omap3430", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+		};
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is uses for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap3-mpu";
+			ti,hwmods = "mpu";
+		};
+
+		iva {
+			compatible = "ti,iva2.2";
+			ti,hwmods = "iva";
+
+			dsp {
+				compatible = "ti,omap3-c64";
+			};
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the OMAP3 interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since that will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+
+		intc: interrupt-controller@1 {
+			compatible = "ti,omap3-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+	};
+};

arch/arm/boot/dts/omap4-panda.dts

+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap4.dtsi"
+
+/ {
+	model = "TI OMAP4 PandaBoard";
+	compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
+
+	/*
+	 * Since the initial device tree board file does not create any
+	 * devices (MMC, network...), the only way to boot is to provide a
+	 * ramdisk.
+	 */
+	chosen {
+		bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+};

arch/arm/boot/dts/omap4-sdp.dts

+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap4.dtsi"
+
+/ {
+	model = "TI OMAP4 SDP board";
+	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
+
+	/*
+	 * Since the initial device tree board file does not create any
+	 * devices (MMC, network...), the only way to boot is to provide a
+	 * ramdisk.
+	 */
+	chosen {
+		bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+};

arch/arm/boot/dts/omap4.dtsi

+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Carveout for multimedia usecases
+ * It should be the last 48MB of the first 512MB memory part
+ * In theory, it should not even exist. That zone should be reserved
+ * dynamically during the .reserve callback.
+ */
+/memreserve/ 0x9d000000 0x03000000;
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "ti,omap4430", "ti,omap4";
+	interrupt-parent = <&gic>;
+
+	aliases {
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+		};
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is uses for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap4-mpu";
+			ti,hwmods = "mpu";
+		};
+
+		dsp {
+			compatible = "ti,omap3-c64";
+			ti,hwmods = "dsp";
+		};
+
+		iva {
+			compatible = "ti,ivahd";
+			ti,hwmods = "iva";
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the OMAP4 interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 *
+	 * MPU -+-- MPU_PRIVATE - GIC, L2
+	 *      |
+	 *      +----------------+----------+
+	 *      |                |          |
+	 *      +            +- EMIF - DDR  |
+	 *      |            |              |
+	 *      |            +     +--------+
+	 *      |            |     |
+	 *      |            +- L4_ABE - AESS, MCBSP, TIMERs...
+	 *      |            |
+	 *      +- L3_MAIN --+- L4_CORE - IPs...
+	 *                   |
+	 *                   +- L4_PER - IPs...
+	 *                   |
+	 *                   +- L4_CFG -+- L4_WKUP - IPs...
+	 *                   |          |
+	 *                   |          +- IPs...
+	 *                   +- IPU ----+
+	 *                   |          |
+	 *                   +- DSP ----+
+	 *                   |          |
+	 *                   +- DSS ----+
+	 *
+	 * Since that will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "ti,omap4-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+
+		gic: interrupt-controller@48241000 {
+			compatible = "arm,cortex-a9-gic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x48241000 0x1000>,
+			      <0x48240100 0x0100>;
+		};
+	};
+};

arch/arm/include/asm/device.h

@@ -12,7 +12,12 @@ struct dev_archdata {
 #endif
 };
 
+struct omap_device;
+
 struct pdev_archdata {
+#ifdef CONFIG_ARCH_OMAP
+	struct omap_device *od;
+#endif
 };
 
 #endif

arch/arm/mach-omap1/Makefile

@@ -4,7 +4,7 @@
 
 # Common support
 obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
-obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o
+obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 

arch/arm/mach-omap1/board-ams-delta.c

@@ -135,12 +135,6 @@ void ams_delta_latch2_write(u16 mask, u16 value)
 	*(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg;
 }
 
-static void __init ams_delta_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 static struct map_desc ams_delta_io_desc[] __initdata = {
 	/* AMS_DELTA_LATCH1 */
 	{
@@ -379,17 +373,13 @@ static int __init ams_delta_modem_init(void)
 }
 arch_initcall(ams_delta_modem_init);
 
-static void __init ams_delta_map_io(void)
-{
-	omap1_map_common_io();
-}
-
 MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	/* Maintainer: Jonathan McDowell <noodles@earth.li> */
 	.boot_params	= 0x10000100,
-	.map_io		= ams_delta_map_io,
+	.map_io		= omap15xx_map_io,
+	.init_early	= omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= ams_delta_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= ams_delta_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-fsample.c

@@ -297,6 +297,39 @@ static struct omap_board_config_kernel fsample_config[] __initdata = {
 
 static void __init omap_fsample_init(void)
 {
+	/* Early, board-dependent init */
+
+	/*
+	 * Hold GSM Reset until needed
+	 */
+	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
+
+	/*
+	 * UARTs -> done automagically by 8250 driver
+	 */
+
+	/*
+	 * CSx timings, GPIO Mux ... setup
+	 */
+
+	/* Flash: CS0 timings setup */
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
+
+	/*
+	 * Ethernet support through the debug board
+	 * CS1 timings setup
+	 */
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
+
+	/*
+	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
+	 * It is used as the Ethernet controller interrupt
+	 */
+	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
+			OMAP7XX_IO_CONF_9);
+
 	fsample_init_smc91x();
 
 	if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0)
@@ -326,12 +359,6 @@ static void __init omap_fsample_init(void)
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
-static void __init omap_fsample_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc omap_fsample_io_desc[] __initdata = {
 	{
@@ -350,49 +377,18 @@ static struct map_desc omap_fsample_io_desc[] __initdata = {
 
 static void __init omap_fsample_map_io(void)
 {
-	omap1_map_common_io();
+	omap15xx_map_io();
 	iotable_init(omap_fsample_io_desc,
 		     ARRAY_SIZE(omap_fsample_io_desc));
-
-	/* Early, board-dependent init */
-
-	/*
-	 * Hold GSM Reset until needed
-	 */
-	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
-
-	/*
-	 * UARTs -> done automagically by 8250 driver
-	 */
-
-	/*
-	 * CSx timings, GPIO Mux ... setup
-	 */
-
-	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
-
-	/*
-	 * Ethernet support through the debug board
-	 * CS1 timings setup
-	 */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
-
-	/*
-	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
-	 * It is used as the Ethernet controller interrupt
-	 */
-	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
 }
 
 MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 /* Maintainer: Brian Swetland <swetland@google.com> */
 	.boot_params	= 0x10000100,
 	.map_io		= omap_fsample_map_io,
+	.init_early	= omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_fsample_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_fsample_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-generic.c

@@ -28,12 +28,6 @@
 #include <plat/board.h>
 #include <plat/common.h>
 
-static void __init omap_generic_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 /* assume no Mini-AB port */
 
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -87,17 +81,13 @@ static void __init omap_generic_init(void)
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
-static void __init omap_generic_map_io(void)
-{
-	omap1_map_common_io();
-}
-
 MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
 	/* Maintainer: Tony Lindgren <tony@atomide.com> */
 	.boot_params	= 0x10000100,
-	.map_io		= omap_generic_map_io,
+	.map_io		= omap16xx_map_io,
+	.init_early	= omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_generic_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-h2.c

@@ -373,12 +373,6 @@ static struct i2c_board_info __initdata h2_i2c_board_info[] = {
 	},
 };
 
-static void __init h2_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 static struct omap_usb_config h2_usb_config __initdata = {
 	/* usb1 has a Mini-AB port and external isp1301 transceiver */
 	.otg		= 2,
@@ -454,17 +448,13 @@ static void __init h2_init(void)
 	h2_mmc_init();
 }
 
-static void __init h2_map_io(void)
-{
-	omap1_map_common_io();
-}
-
 MACHINE_START(OMAP_H2, "TI-H2")
 	/* Maintainer: Imre Deak <imre.deak@nokia.com> */
 	.boot_params	= 0x10000100,
-	.map_io		= h2_map_io,
+	.map_io		= omap16xx_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= h2_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= h2_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-h3.c

@@ -436,23 +436,13 @@ static void __init h3_init(void)
 	h3_mmc_init();
 }
 
-static void __init h3_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
-static void __init h3_map_io(void)
-{
-	omap1_map_common_io();
-}
-
 MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
 	/* Maintainer: Texas Instruments, Inc. */
 	.boot_params	= 0x10000100,
-	.map_io		= h3_map_io,
+	.map_io		= omap16xx_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= h3_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= h3_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-htcherald.c

@@ -500,7 +500,7 @@ static void __init htcherald_lcd_init(void)
 
 static void __init htcherald_map_io(void)
 {
-	omap1_map_common_io();
+	omap7xx_map_io();
 
 	/*
 	 * The LCD panel must be disabled and DMA turned off here, as doing
@@ -601,20 +601,14 @@ static void __init htcherald_init(void)
 #endif
 }
 
-static void __init htcherald_init_irq(void)
-{
-	printk(KERN_INFO "htcherald_init_irq.\n");
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 MACHINE_START(HERALD, "HTC Herald")
 	/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
 	/* Maintainer: wing-linux.sourceforge.net */
 	.boot_params    = 0x10000100,
 	.map_io         = htcherald_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq       = htcherald_init_irq,
+	.init_irq       = omap1_init_irq,
 	.init_machine   = htcherald_init,
 	.timer          = &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-innovator.c

@@ -289,12 +289,6 @@ static void __init innovator_init_smc91x(void)
 	}
 }
 
-static void __init innovator_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_usb_config innovator1510_usb_config __initdata = {
 	/* for bundled non-standard host and peripheral cables */
@@ -439,30 +433,32 @@ static void __init innovator_init(void)
 	innovator_mmc_init();
 }
 
+/*
+ * REVISIT: Assume 15xx for now, we don't want to do revision check
+ * until later on. The right way to fix this is to set up a different
+ * machine_id for 16xx Innovator, or use device tree.
+ */
 static void __init innovator_map_io(void)
 {
-	omap1_map_common_io();
+	omap15xx_map_io();
 
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap1510()) {
 	iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
 	udelay(10);	/* Delay needed for FPGA */
 
 	/* Dump the Innovator FPGA rev early - useful info for support. */
-		printk("Innovator FPGA Rev %d.%d Board Rev %d\n",
+	pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
 			fpga_read(OMAP1510_FPGA_REV_HIGH),
 			fpga_read(OMAP1510_FPGA_REV_LOW),
 			fpga_read(OMAP1510_FPGA_BOARD_REV));
-	}
-#endif
 }
 
 MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
 	/* Maintainer: MontaVista Software, Inc. */
 	.boot_params	= 0x10000100,
 	.map_io		= innovator_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= innovator_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= innovator_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-nokia770.c

@@ -39,21 +39,6 @@
 
 #define ADS7846_PENDOWN_GPIO	15
 
-static void __init omap_nokia770_init_irq(void)
-{
-	/* On Nokia 770, the SleepX signal is masked with an
-	 * MPUIO line by default.  It has to be unmasked for it
-	 * to become functional */
-
-	/* SleepX mask direction */
-	omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008);
-	/* Unmask SleepX signal */
-	omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
-
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 static const unsigned int nokia770_keymap[] = {
 	KEY(1, 0, GROUP_0 | KEY_UP),
 	KEY(2, 0, GROUP_1 | KEY_F5),
@@ -246,6 +231,15 @@ static inline void nokia770_mmc_init(void)
 
 static void __init omap_nokia770_init(void)
 {
+	/* On Nokia 770, the SleepX signal is masked with an
+	 * MPUIO line by default.  It has to be unmasked for it
+	 * to become functional */
+
+	/* SleepX mask direction */
+	omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008);
+	/* Unmask SleepX signal */
+	omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
+
 	platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
 	spi_register_board_info(nokia770_spi_board_info,
 				ARRAY_SIZE(nokia770_spi_board_info));
@@ -258,16 +252,12 @@ static void __init omap_nokia770_init(void)
 	nokia770_mmc_init();
 }
 
-static void __init omap_nokia770_map_io(void)
-{
-	omap1_map_common_io();
-}
-
 MACHINE_START(NOKIA770, "Nokia 770")
 	.boot_params	= 0x10000100,
-	.map_io		= omap_nokia770_map_io,
+	.map_io		= omap16xx_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_nokia770_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_nokia770_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-osk.c

@@ -279,12 +279,6 @@ static void __init osk_init_cf(void)
 	irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
 }
 
-static void __init osk_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 static struct omap_usb_config osk_usb_config __initdata = {
 	/* has usb host connector (A) ... for development it can also
 	 * be used, with a NONSTANDARD gender-bending cable/dongle, as
@@ -576,17 +570,13 @@ static void __init osk_init(void)
 	osk_mistral_init();
 }
 
-static void __init osk_map_io(void)
-{
-	omap1_map_common_io();
-}
-
 MACHINE_START(OMAP_OSK, "TI-OSK")
 	/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
 	.boot_params	= 0x10000100,
-	.map_io		= osk_map_io,
+	.map_io		= omap16xx_map_io,
+	.init_early	= omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= osk_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= osk_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-palmte.c

@@ -59,12 +59,6 @@
 #define PALMTE_MMC2_GPIO	OMAP_MPUIO(7)
 #define PALMTE_MMC3_GPIO	OMAP_MPUIO(11)
 
-static void __init omap_palmte_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 static const unsigned int palmte_keymap[] = {
 	KEY(0, 0, KEY_F1),		/* Calendar */
 	KEY(1, 0, KEY_F2),		/* Contacts */
@@ -269,16 +263,12 @@ static void __init omap_palmte_init(void)
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
-static void __init omap_palmte_map_io(void)
-{
-	omap1_map_common_io();
-}
-
 MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 	.boot_params	= 0x10000100,
-	.map_io		= omap_palmte_map_io,
+	.map_io		= omap15xx_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_palmte_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmte_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-palmtt.c

@@ -263,12 +263,6 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = {
 	}
 };
 
-static void __init omap_palmtt_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 static struct omap_usb_config palmtt_usb_config __initdata = {
 	.register_dev	= 1,
 	.hmc_mode	= 0,
@@ -315,16 +309,12 @@ static void __init omap_palmtt_init(void)
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
-static void __init omap_palmtt_map_io(void)
-{
-	omap1_map_common_io();
-}
-
 MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
 	.boot_params	= 0x10000100,
-	.map_io		= omap_palmtt_map_io,
+	.map_io		= omap15xx_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_palmtt_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmtt_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-palmz71.c

@@ -57,13 +57,6 @@
 #define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)
 #define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)
 
-static void __init
-omap_palmz71_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 static const unsigned int palmz71_keymap[] = {
 	KEY(0, 0, KEY_F1),
 	KEY(1, 0, KEY_F2),
@@ -334,17 +327,12 @@ omap_palmz71_init(void)
 	palmz71_gpio_setup(0);
 }
 
-static void __init
-omap_palmz71_map_io(void)
-{
-	omap1_map_common_io();
-}
-
 MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
 	.boot_params	= 0x10000100,
-	.map_io		= omap_palmz71_map_io,
+	.map_io		= omap15xx_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_palmz71_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmz71_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-perseus2.c

@@ -265,6 +265,39 @@ static void __init perseus2_init_smc91x(void)
 
 static void __init omap_perseus2_init(void)
 {
+	/* Early, board-dependent init */
+
+	/*
+	 * Hold GSM Reset until needed
+	 */
+	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
+
+	/*
+	 * UARTs -> done automagically by 8250 driver
+	 */
+
+	/*
+	 * CSx timings, GPIO Mux ... setup
+	 */
+
+	/* Flash: CS0 timings setup */
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
+
+	/*
+	 * Ethernet support through the debug board
+	 * CS1 timings setup
+	 */
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
+
+	/*
+	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
+	 * It is used as the Ethernet controller interrupt
+	 */
+	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
+				OMAP7XX_IO_CONF_9);
+
 	perseus2_init_smc91x();
 
 	if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
@@ -294,11 +327,6 @@ static void __init omap_perseus2_init(void)
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
-static void __init omap_perseus2_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc omap_perseus2_io_desc[] __initdata = {
 	{
@@ -311,49 +339,18 @@ static struct map_desc omap_perseus2_io_desc[] __initdata = {
 
 static void __init omap_perseus2_map_io(void)
 {
-	omap1_map_common_io();
+	omap7xx_map_io();
 	iotable_init(omap_perseus2_io_desc,
 		     ARRAY_SIZE(omap_perseus2_io_desc));
-
-	/* Early, board-dependent init */
-
-	/*
-	 * Hold GSM Reset until needed
-	 */
-	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
-
-	/*
-	 * UARTs -> done automagically by 8250 driver
-	 */
-
-	/*
-	 * CSx timings, GPIO Mux ... setup
-	 */
-
-	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
-
-	/*
-	 * Ethernet support through the debug board
-	 * CS1 timings setup
-	 */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
-
-	/*
-	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
-	 * It is used as the Ethernet controller interrupt
-	 */
-	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
 }
 
 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
 	/* Maintainer: Kevin Hilman <kjh@hilman.org> */
 	.boot_params	= 0x10000100,
 	.map_io		= omap_perseus2_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_perseus2_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_perseus2_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-sx1.c

@@ -407,24 +407,13 @@ static void __init omap_sx1_init(void)
 	gpio_direction_output(11, 0);	/*A_SWITCH = 0 */
 	gpio_direction_output(15, 0);	/*A_USB_ON = 0 */
 }
-/*----------------------------------------*/
-static void __init omap_sx1_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-/*----------------------------------------*/
-
-static void __init omap_sx1_map_io(void)
-{
-	omap1_map_common_io();
-}
 
 MACHINE_START(SX1, "OMAP310 based Siemens SX1")
 	.boot_params	= 0x10000100,
-	.map_io		= omap_sx1_map_io,
+	.map_io		= omap15xx_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_sx1_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_sx1_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-voiceblue.c

@@ -159,17 +159,6 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
 static struct omap_board_config_kernel voiceblue_config[] = {
 };
 
-static void __init voiceblue_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
-static void __init voiceblue_map_io(void)
-{
-	omap1_map_common_io();
-}
-
 #define MACHINE_PANICED		1
 #define MACHINE_REBOOTING	2
 #define MACHINE_REBOOT		4
@@ -302,9 +291,10 @@ static void __init voiceblue_init(void)
 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
 	/* Maintainer: Ladislav Michl <michl@2n.cz> */
 	.boot_params	= 0x10000100,
-	.map_io		= voiceblue_map_io,
+	.map_io		= omap15xx_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= voiceblue_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= voiceblue_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/devices.c

@@ -21,6 +21,7 @@
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
 
+#include <plat/common.h>
 #include <plat/tc.h>
 #include <plat/board.h>
 #include <plat/mux.h>
@@ -291,6 +292,8 @@ static int __init omap1_init_devices(void)
 	if (!cpu_class_is_omap1())
 		return -ENODEV;
 
+	omap_sram_init();
+
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */

arch/arm/mach-omap1/io.c

@@ -21,7 +21,6 @@
 #include "clock.h"
 
 extern void omap_check_revision(void);
-extern void omap_sram_init(void);
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -85,50 +84,45 @@ static struct map_desc omap16xx_io_desc[] __initdata = {
 #endif
 
 /*
- * Maps common IO regions for omap1. This should only get called from
- * board specific init.
+ * Maps common IO regions for omap1
  */
-void __init omap1_map_common_io(void)
+static void __init omap1_map_common_io(void)
 {
 	iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
-
-	/* Normally devicemaps_init() would flush caches and tlb after
-	 * mdesc->map_io(), but we must also do it here because of the CPU
-	 * revision check below.
-	 */
-	local_flush_tlb_all();
-	flush_cache_all();
-
-	/* We want to check CPU revision early for cpu_is_omapxxxx() macros.
-	 * IO space mapping must be initialized before we can do that.
-	 */
-	omap_check_revision();
+}
 
 #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
-	if (cpu_is_omap7xx()) {
+void __init omap7xx_map_io(void)
+{
+	omap1_map_common_io();
 	iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
-	}
+}
 #endif
+
 #ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap15xx()) {
+void __init omap15xx_map_io(void)
+{
+	omap1_map_common_io();
 	iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
-	}
+}
 #endif
+
 #if defined(CONFIG_ARCH_OMAP16XX)
-	if (cpu_is_omap16xx()) {
+void __init omap16xx_map_io(void)
+{
+	omap1_map_common_io();
 	iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
-	}
-#endif
-
-	omap_sram_init();
 }
+#endif
 
 /*
- * Common low-level hardware init for omap1. This should only get called from
- * board specific init.
+ * Common low-level hardware init for omap1.
  */
-void __init omap1_init_common_hw(void)
+void omap1_init_early(void)
 {
+	omap_check_revision();
+	omap_ioremap_init();
+
 	/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
 	 * on a Posted Write in the TIPB Bridge".
 	 */
@@ -138,7 +132,6 @@ void __init omap1_init_common_hw(void)
 	/* Must init clocks early to assure that timer interrupt works
 	 */
 	omap1_clk_init();
-
 	omap1_mux_init();
 }
 

arch/arm/mach-omap1/mcbsp.c

@@ -31,6 +31,7 @@
 static int dsp_use;
 static struct clk *api_clk;
 static struct clk *dsp_clk;
+static struct platform_device **omap_mcbsp_devices;
 
 static void omap1_mcbsp_request(unsigned int id)
 {
@@ -78,6 +79,17 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
 	.free		= omap1_mcbsp_free,
 };
 
+#define OMAP7XX_MCBSP1_BASE	0xfffb1000
+#define OMAP7XX_MCBSP2_BASE	0xfffb1800
+
+#define OMAP1510_MCBSP1_BASE	0xe1011800
+#define OMAP1510_MCBSP2_BASE	0xfffb1000
+#define OMAP1510_MCBSP3_BASE	0xe1017000
+
+#define OMAP1610_MCBSP1_BASE	0xe1011800
+#define OMAP1610_MCBSP2_BASE	0xfffb1000
+#define OMAP1610_MCBSP3_BASE	0xe1017000
+
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 struct resource omap7xx_mcbsp_res[][6] = {
 	{
@@ -369,6 +381,39 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 #define OMAP16XX_MCBSP_COUNT		0
 #endif
 
+static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
+			struct omap_mcbsp_platform_data *config, int size)
+{
+	int i;
+
+	omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
+				     GFP_KERNEL);
+	if (!omap_mcbsp_devices) {
+		printk(KERN_ERR "Could not register McBSP devices\n");
+		return;
+	}
+
+	for (i = 0; i < size; i++) {
+		struct platform_device *new_mcbsp;
+		int ret;
+
+		new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
+		if (!new_mcbsp)
+			continue;
+		platform_device_add_resources(new_mcbsp, &res[i * res_count],
+					res_count);
+		config[i].reg_size = 2;
+		config[i].reg_step = 2;
+		new_mcbsp->dev.platform_data = &config[i];
+		ret = platform_device_add(new_mcbsp);
+		if (ret) {
+			platform_device_put(new_mcbsp);
+			continue;
+		}
+		omap_mcbsp_devices[i] = new_mcbsp;
+	}
+}
+
 static int __init omap1_mcbsp_init(void)
 {
 	if (!cpu_class_is_omap1())

arch/arm/mach-omap1/timer.c

+/**
+ * OMAP1 Dual-Mode Timers - platform device registration
+ *
+ * Contains first level initialization routines which internally
+ * generates timer device information and registers with linux
+ * device model. It also has low level function to chnage the timer
+ * input clock source.
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Tarun Kanti DebBarma <tarun.kanti@ti.com>
+ * Thara Gopinath <thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+
+#include <plat/dmtimer.h>
+
+#define OMAP1610_GPTIMER1_BASE		0xfffb1400
+#define OMAP1610_GPTIMER2_BASE		0xfffb1c00
+#define OMAP1610_GPTIMER3_BASE		0xfffb2400
+#define OMAP1610_GPTIMER4_BASE		0xfffb2c00
+#define OMAP1610_GPTIMER5_BASE		0xfffb3400
+#define OMAP1610_GPTIMER6_BASE		0xfffb3c00
+#define OMAP1610_GPTIMER7_BASE		0xfffb7400
+#define OMAP1610_GPTIMER8_BASE		0xfffbd400
+
+#define OMAP1_DM_TIMER_COUNT		8
+
+static int omap1_dm_timer_set_src(struct platform_device *pdev,
+				int source)
+{
+	int n = (pdev->id - 1) << 1;
+	u32 l;
+
+	l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
+	l |= source << n;
+	__raw_writel(l, MOD_CONF_CTRL_1);
+
+	return 0;
+}
+
+
+int __init omap1_dm_timer_init(void)
+{
+	int i;
+	int ret;
+	struct dmtimer_platform_data *pdata;
+	struct platform_device *pdev;
+
+	if (!cpu_is_omap16xx())
+		return 0;
+
+	for (i = 1; i <= OMAP1_DM_TIMER_COUNT; i++) {
+		struct resource res[2];
+		u32 base, irq;
+
+		switch (i) {
+		case 1:
+			base = OMAP1610_GPTIMER1_BASE;
+			irq = INT_1610_GPTIMER1;
+			break;
+		case 2:
+			base = OMAP1610_GPTIMER2_BASE;
+			irq = INT_1610_GPTIMER2;
+			break;
+		case 3:
+			base = OMAP1610_GPTIMER3_BASE;
+			irq = INT_1610_GPTIMER3;
+			break;
+		case 4:
+			base = OMAP1610_GPTIMER4_BASE;
+			irq = INT_1610_GPTIMER4;
+			break;
+		case 5:
+			base = OMAP1610_GPTIMER5_BASE;
+			irq = INT_1610_GPTIMER5;
+			break;
+		case 6:
+			base = OMAP1610_GPTIMER6_BASE;
+			irq = INT_1610_GPTIMER6;
+			break;
+		case 7:
+			base = OMAP1610_GPTIMER7_BASE;
+			irq = INT_1610_GPTIMER7;
+			break;
+		case 8:
+			base = OMAP1610_GPTIMER8_BASE;
+			irq = INT_1610_GPTIMER8;
+			break;
+		default:
+			/*
+			 * not supposed to reach here.
+			 * this is to remove warning.
+			 */
+			return -EINVAL;
+		}
+
+		pdev = platform_device_alloc("omap_timer", i);
+		if (!pdev) {
+			pr_err("%s: Failed to device alloc for dmtimer%d\n",
+				__func__, i);
+			return -ENOMEM;
+		}
+
+		memset(res, 0, 2 * sizeof(struct resource));
+		res[0].start = base;
+		res[0].end = base + 0x46;
+		res[0].flags = IORESOURCE_MEM;
+		res[1].start = irq;
+		res[1].end = irq;
+		res[1].flags = IORESOURCE_IRQ;
+		ret = platform_device_add_resources(pdev, res,
+				ARRAY_SIZE(res));
+		if (ret) {
+			dev_err(&pdev->dev, "%s: Failed to add resources.\n",
+				__func__);
+			goto err_free_pdev;
+		}
+
+		pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+		if (!pdata) {
+			dev_err(&pdev->dev, "%s: Failed to allocate pdata.\n",
+				__func__);
+			ret = -ENOMEM;
+			goto err_free_pdata;
+		}
+
+		pdata->set_timer_src = omap1_dm_timer_set_src;
+		pdata->needs_manual_reset = 1;
+
+		ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
+		if (ret) {
+			dev_err(&pdev->dev, "%s: Failed to add platform data.\n",
+				__func__);
+			goto err_free_pdata;
+		}
+
+		ret = platform_device_add(pdev);
+		if (ret) {
+			dev_err(&pdev->dev, "%s: Failed to add platform device.\n",
+				__func__);
+			goto err_free_pdata;
+		}
+
+		dev_dbg(&pdev->dev, " Registered.\n");
+	}
+
+	return 0;
+
+err_free_pdata:
+	kfree(pdata);
+
+err_free_pdev:
+	platform_device_unregister(pdev);
+
+	return ret;
+}
+arch_initcall(omap1_dm_timer_init);

arch/arm/mach-omap2/Kconfig

@@ -106,9 +106,13 @@ comment "OMAP Board Type"
 	depends on ARCH_OMAP2PLUS
 
 config MACH_OMAP_GENERIC
-	bool "Generic OMAP board"
-	depends on ARCH_OMAP2
+	bool "Generic OMAP2+ board"
+	depends on ARCH_OMAP2PLUS
+	select USE_OF
 	default y
+	help
+	  Support for generic TI OMAP2+ boards using Flattened Device Tree.
+	  More information at Documentation/devicetree
 
 config MACH_OMAP2_TUSB6010
 	bool

arch/arm/mach-omap2/Makefile

@@ -89,14 +89,13 @@ obj-$(CONFIG_ARCH_OMAP4)		+= prcm.o cm2xxx_3xxx.o cminst44xx.o \
 					   vp44xx_data.o
 
 # OMAP voltage domains
-ifeq ($(CONFIG_PM),y)
-voltagedomain-common			:= voltage.o
-obj-$(CONFIG_ARCH_OMAP2)		+= $(voltagedomain-common)
+voltagedomain-common			:= voltage.o vc.o vp.o
+obj-$(CONFIG_ARCH_OMAP2)		+= $(voltagedomain-common) \
+					   voltagedomains2xxx_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= $(voltagedomain-common) \
 					   voltagedomains3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(voltagedomain-common) \
 					   voltagedomains44xx_data.o
-endif
 
 # OMAP powerdomain framework
 powerdomain-common			+= powerdomain.o powerdomain-common.o
@@ -116,9 +115,12 @@ obj-$(CONFIG_ARCH_OMAP4)		+= $(powerdomain-common) \
 obj-$(CONFIG_ARCH_OMAP2)		+= clockdomain.o \
 					   clockdomain2xxx_3xxx.o \
 					   clockdomains2xxx_3xxx_data.o
+obj-$(CONFIG_SOC_OMAP2420)		+= clockdomains2420_data.o
+obj-$(CONFIG_SOC_OMAP2430)		+= clockdomains2430_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clockdomain.o \
 					   clockdomain2xxx_3xxx.o \
-					   clockdomains2xxx_3xxx_data.o
+					   clockdomains2xxx_3xxx_data.o \
+					   clockdomains3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clockdomain.o \
 					   clockdomain44xx.o \
 					   clockdomains44xx_data.o
@@ -185,78 +187,66 @@ endif
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
-obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o \
-					   hsmmc.o
+obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o
 obj-$(CONFIG_MACH_OMAP_APOLLON)		+= board-apollon.o
-obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o \
-					   hsmmc.o
-obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o \
-                                           hsmmc.o
-obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
-					   board-flash.o \
-					   hsmmc.o
-obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o \
-					   hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o \
-					   hsmmc.o
-obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
-					   hsmmc.o
-obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o \
-					   hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
-					   hsmmc.o
-obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
-					   hsmmc.o \
-					   board-flash.o
+obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o
+obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o
+obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
+obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o
+obj-$(CONFIG_MACH_ENCORE)		+= board-omap3encore.o
+obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
+obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o
+obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o
+obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RM680)		+= board-rm680.o \
-					   sdram-nokia.o \
-					   hsmmc.o
+					   sdram-nokia.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   sdram-nokia.o \
 					   board-rx51-peripherals.o \
-					   board-rx51-video.o \
-					   hsmmc.o
+					   board-rx51-video.o
 obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom.o \
 					   board-zoom-peripherals.o \
 					   board-zoom-display.o \
-					   board-flash.o \
-					   hsmmc.o \
 					   board-zoom-debugboard.o
 obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom.o \
 					   board-zoom-peripherals.o \
 					   board-zoom-display.o \
-					   board-flash.o \
-					   hsmmc.o \
 					   board-zoom-debugboard.o
 obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o \
 					   board-zoom-peripherals.o \
-					   board-zoom-display.o \
-					   board-flash.o \
-					   hsmmc.o
-obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o \
-					   hsmmc.o
+					   board-zoom-display.o
+obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o
 obj-$(CONFIG_MACH_CM_T3517)		+= board-cm-t3517.o
-obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o \
-					   hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o \
-					   hsmmc.o
+obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o
+obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o
 obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o \
-					   hsmmc.o \
 					   omap_phy_internal.o
 obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board-omap4panda.o \
-					   hsmmc.o \
+					   omap_phy_internal.o
+
+obj-$(CONFIG_MACH_PCM049)		+= board-omap4pcm049.o \
 					   omap_phy_internal.o
 
 obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o \
-					   omap_phy_internal.o \
+					   omap_phy_internal.o
 
 obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o
 
-obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o \
-					   hsmmc.o
+obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o
 obj-$(CONFIG_MACH_TI8168EVM)		+= board-ti8168evm.o
+
 # Platform specific device init code
+
+omap-flash-$(CONFIG_MTD_NAND_OMAP2)	:= board-flash.o
+omap-flash-$(CONFIG_MTD_ONENAND_OMAP2)	:= board-flash.o
+obj-y					+= $(omap-flash-y) $(omap-flash-m)
+
+omap-hsmmc-$(CONFIG_MMC_OMAP_HS)	:= hsmmc.o
+obj-y					+= $(omap-hsmmc-m) $(omap-hsmmc-y)
+
+
 usbfs-$(CONFIG_ARCH_OMAP_OTG)		:= usb-fs.o
 obj-y					+= $(usbfs-m) $(usbfs-y)
 obj-y					+= usb-musb.o

arch/arm/mach-omap2/board-2430sdp.c

@@ -141,12 +141,6 @@ static struct omap_board_config_kernel sdp2430_config[] __initdata = {
 	{OMAP_TAG_LCD, &sdp2430_lcd_config},
 };
 
-static void __init omap_2430sdp_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
 static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = {
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
@@ -193,7 +187,8 @@ static int __init omap2430_i2c_init(void)
 {
 	omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
 			ARRAY_SIZE(sdp2430_i2c1_boardinfo));
-	omap2_pmic_init("twl4030", &sdp2430_twldata);
+	omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,
+			&sdp2430_twldata);
 	return 0;
 }
 
@@ -235,6 +230,7 @@ static void __init omap_2430sdp_init(void)
 
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
 	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
 	omap2_hsmmc_init(mmc);
 	omap2_usbfs_init(&sdp2430_usb_config);
 
@@ -248,18 +244,12 @@ static void __init omap_2430sdp_init(void)
 			 "Secondary LCD backlight");
 }
 
-static void __init omap_2430sdp_map_io(void)
-{
-	omap2_set_globals_243x();
-	omap243x_map_common_io();
-}
-
 MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
-	.map_io		= omap_2430sdp_map_io,
-	.init_early	= omap_2430sdp_init_early,
+	.map_io		= omap243x_map_io,
+	.init_early	= omap2430_init_early,
 	.init_irq	= omap2_init_irq,
 	.init_machine	= omap_2430sdp_init,
 	.timer		= &omap2_timer,

arch/arm/mach-omap2/board-3430sdp.c

@@ -225,12 +225,6 @@ static struct omap_dss_board_info sdp3430_dss_data = {
 static struct omap_board_config_kernel sdp3430_config[] __initdata = {
 };
 
-static void __init omap_3430sdp_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
-}
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -719,6 +713,7 @@ static void __init omap_3430sdp_init(void)
 		gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
 	omap_ads7846_init(1, gpio_pendown, 310, NULL);
 	board_serial_init();
+	omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
 	usb_musb_init(NULL);
 	board_smc91x_init();
 	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
@@ -732,7 +727,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= omap_3430sdp_init_early,
+	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_3430sdp_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-3630sdp.c

@@ -70,13 +70,6 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 static struct omap_board_config_kernel sdp_config[] __initdata = {
 };
 
-static void __init omap_sdp_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
-				  h8mbx00u0mer0em_sdrc_params);
-}
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -207,6 +200,8 @@ static void __init omap_sdp_init(void)
 	omap_board_config = sdp_config;
 	omap_board_config_size = ARRAY_SIZE(sdp_config);
 	zoom_peripherals_init();
+	omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
+				  h8mbx00u0mer0em_sdrc_params);
 	zoom_display_init();
 	board_smc91x_init();
 	board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
@@ -218,7 +213,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= omap_sdp_init_early,
+	.init_early	= omap3630_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_sdp_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-4430sdp.c

@@ -129,7 +129,7 @@ static const int sdp4430_keymap[] = {
 	KEY(7, 6, KEY_OK),
 	KEY(7, 7, KEY_DOWN),
 };
-static struct omap_device_pad keypad_pads[] __initdata = {
+static struct omap_device_pad keypad_pads[] = {
 	{	.name   = "kpd_col1.kpd_col1",
 		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 	},
@@ -389,12 +389,6 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&sdp4430_lcd_config },
 };
 
-static void __init omap_4430sdp_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
 static struct omap_musb_board_data musb_board_data = {
 	.interface_type		= MUSB_INTERFACE_UTMI,
 	.mode			= MUSB_OTG,
@@ -809,6 +803,7 @@ static void __init omap_4430sdp_init(void)
 	omap_sfh7741prox_init();
 	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
 	board_serial_init();
+	omap_sdrc_init(NULL, NULL);
 	omap4_sdp4430_wifi_init();
 	omap4_twl6030_hsmmc_init(mmc);
 
@@ -830,18 +825,12 @@ static void __init omap_4430sdp_init(void)
 	omap_4430sdp_display_init();
 }
 
-static void __init omap_4430sdp_map_io(void)
-{
-	omap2_set_globals_443x();
-	omap44xx_map_common_io();
-}
-
 MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
-	.map_io		= omap_4430sdp_map_io,
-	.init_early	= omap_4430sdp_init_early,
+	.map_io		= omap4_map_io,
+	.init_early	= omap4430_init_early,
 	.init_irq	= gic_init_irq,
 	.init_machine	= omap_4430sdp_init,
 	.timer		= &omap4_timer,

arch/arm/mach-omap2/board-am3517crane.c

@@ -47,12 +47,6 @@ static struct omap_board_mux board_mux[] __initdata = {
 };
 #endif
 
-static void __init am3517_crane_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
 static struct usbhs_omap_board_data usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -70,6 +64,7 @@ static void __init am3517_crane_init(void)
 
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
 
 	omap_board_config = am3517_crane_config;
 	omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
@@ -101,7 +96,7 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= am3517_crane_init_early,
+	.init_early	= am35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= am3517_crane_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-am3517evm.c

@@ -362,11 +362,6 @@ static struct omap_dss_board_info am3517_evm_dss_data = {
 /*
  * Board initialization
  */
-static void __init am3517_evm_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
 
 static struct omap_musb_board_data musb_board_data = {
 	.interface_type         = MUSB_INTERFACE_ULPI,
@@ -469,6 +464,7 @@ static void __init am3517_evm_init(void)
 	am3517_evm_i2c_init();
 	omap_display_init(&am3517_evm_dss_data);
 	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
 
 	/* Configure GPIO for EHCI port */
 	omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
@@ -493,7 +489,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= am3517_evm_init_early,
+	.init_early	= am35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= am3517_evm_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-apollon.c

@@ -273,12 +273,6 @@ static struct omap_board_config_kernel apollon_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&apollon_lcd_config },
 };
 
-static void __init omap_apollon_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
 static struct gpio apollon_gpio_leds[] __initdata = {
 	{ LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */
 	{ LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6  */
@@ -340,20 +334,15 @@ static void __init omap_apollon_init(void)
 	 */
 	platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
 	omap_serial_init();
-}
-
-static void __init omap_apollon_map_io(void)
-{
-	omap2_set_globals_242x();
-	omap242x_map_common_io();
+	omap_sdrc_init(NULL, NULL);
 }
 
 MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
-	.map_io		= omap_apollon_map_io,
-	.init_early	= omap_apollon_init_early,
+	.map_io		= omap242x_map_io,
+	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
 	.init_machine	= omap_apollon_init,
 	.timer		= &omap2_timer,

arch/arm/mach-omap2/board-cm-t35.c

@@ -471,13 +471,6 @@ static void __init cm_t35_init_i2c(void)
 	omap3_pmic_init("tps65930", &cm_t35_twldata);
 }
 
-static void __init cm_t35_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
-}
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	/* nCS and IRQ for CM-T35 ethernet */
@@ -610,6 +603,8 @@ static void __init cm_t3x_common_init(void)
 	omap_board_config_size = ARRAY_SIZE(cm_t35_config);
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
 	omap_serial_init();
+	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
 	cm_t35_init_i2c();
 	omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
 	cm_t35_init_ethernet();
@@ -637,7 +632,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= cm_t35_init_early,
+	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= cm_t35_init,
 	.timer		= &omap3_timer,
@@ -647,7 +642,7 @@ MACHINE_START(CM_T3730, "Compulab CM-T3730")
 	.boot_params    = 0x80000100,
 	.reserve        = omap_reserve,
 	.map_io         = omap3_map_io,
-	.init_early     = cm_t35_init_early,
+	.init_early     = omap3630_init_early,
 	.init_irq       = omap3_init_irq,
 	.init_machine   = cm_t3730_init,
 	.timer          = &omap3_timer,

arch/arm/mach-omap2/board-cm-t3517.c

@@ -251,12 +251,6 @@ static inline void cm_t3517_init_nand(void) {}
 static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
 };
 
-static void __init cm_t3517_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	/* GPIO186 - Green LED */
@@ -289,6 +283,7 @@ static void __init cm_t3517_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
 	omap_board_config = cm_t3517_config;
 	omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
 	cm_t3517_init_leds();
@@ -302,7 +297,7 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
 	.boot_params	= 0x80000100,
 	.reserve        = omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= cm_t3517_init_early,
+	.init_early	= am35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= cm_t3517_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-devkit8000.c

@@ -397,19 +397,6 @@ static struct platform_device keys_gpio = {
 	},
 };
 
-
-static void __init devkit8000_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-}
-
-static void __init devkit8000_init_irq(void)
-{
-	omap3_init_irq();
-}
-
 #define OMAP_DM9000_BASE	0x2c000000
 
 static struct resource omap_dm9000_resources[] = {
@@ -645,6 +632,8 @@ static void __init devkit8000_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
 	omap_serial_init();
+	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+				  mt46h32m32lf6_sdrc_params);
 
 	omap_dm9000_init();
 
@@ -670,8 +659,8 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= devkit8000_init_early,
-	.init_irq	= devkit8000_init_irq,
+	.init_early	= omap35xx_init_early,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= devkit8000_init,
 	.timer		= &omap3_secure_timer,
 MACHINE_END

arch/arm/mach-omap2/board-flash.c

@@ -148,11 +148,6 @@ __init board_nand_init(struct mtd_partition *nand_parts,
 	board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
 	gpmc_nand_init(&board_nand_data);
 }
-#else
-void
-__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, int nand_type)
-{
-}
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
 
 /**

arch/arm/mach-omap2/board-flash.h

@@ -24,7 +24,26 @@ struct flash_partitions {
 	int nr_parts;
 };
 
+#if defined(CONFIG_MTD_NAND_OMAP2) || \
+		defined(CONFIG_MTD_NAND_OMAP2_MODULE) || \
+		defined(CONFIG_MTD_ONENAND_OMAP2) || \
+		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
 extern void board_flash_init(struct flash_partitions [],
 				char chip_sel[][GPMC_CS_NUM], int nand_type);
+#else
+static inline void board_flash_init(struct flash_partitions part[],
+				char chip_sel[][GPMC_CS_NUM], int nand_type)
+{
+}
+#endif
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || \
+		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
 extern void board_nand_init(struct mtd_partition *nand_parts,
 					u8 nr_parts, u8 cs, int nand_type);
+#else
+static inline void board_nand_init(struct mtd_partition *nand_parts,
+					u8 nr_parts, u8 cs, int nand_type)
+{
+}
+#endif

arch/arm/mach-omap2/board-generic.c

 /*
- * linux/arch/arm/mach-omap2/board-generic.c
- *
  * Copyright (C) 2005 Nokia Corporation
  * Author: Paul Mundt <paul.mundt@nokia.com>
  *
- * Modified from mach-omap/omap1/board-generic.c
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  *
- * Code for generic OMAP2 board. Should work on many OMAP2 systems where
- * the bootloader passes the board-specific data to the kernel.
- * Do not put any board specific code to this file; create a new machine
- * type if you need custom low-level initializations.
+ * Modified from the original mach-omap/omap2/board-generic.c did by Paul
+ * to support the OMAP2+ device tree boards with an unique board file.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/irqdomain.h>
+#include <linux/i2c/twl.h>
 
 #include <mach/hardware.h>
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
 
-#include <mach/gpio.h>
-#include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/common.h>
+#include <mach/omap4-common.h>
+#include "common-board-devices.h"
+
+/*
+ * XXX: Still needed to boot until the i2c & twl driver is adapted to
+ * device-tree
+ */
+static struct twl4030_platform_data sdp4430_twldata = {
+	.irq_base	= TWL6030_IRQ_BASE,
+	.irq_end	= TWL6030_IRQ_END,
+};
 
-static struct omap_board_config_kernel generic_config[] = {
+static void __init omap4_i2c_init(void)
+{
+	omap4_pmic_init("twl6030", &sdp4430_twldata);
+}
+
+static struct twl4030_platform_data beagle_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
 };
 
-static void __init omap_generic_init_early(void)
+static void __init omap3_i2c_init(void)
 {
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
+	omap3_pmic_init("twl4030", &beagle_twldata);
 }
 
+static struct of_device_id omap_dt_match_table[] __initdata = {
+	{ .compatible = "simple-bus", },
+	{ .compatible = "ti,omap-infra", },
+	{ }
+};
+
+static struct of_device_id intc_match[] __initdata = {
+	{ .compatible = "ti,omap3-intc", },
+	{ .compatible = "arm,cortex-a9-gic", },
+	{ }
+};
+
 static void __init omap_generic_init(void)
 {
+	struct device_node *node = of_find_matching_node(NULL, intc_match);
+	if (node)
+		irq_domain_add_simple(node, 0);
+
 	omap_serial_init();
-	omap_board_config = generic_config;
-	omap_board_config_size = ARRAY_SIZE(generic_config);
+	omap_sdrc_init(NULL, NULL);
+
+	of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
 }
 
-static void __init omap_generic_map_io(void)
+static void __init omap4_init(void)
 {
-	if (cpu_is_omap242x()) {
-		omap2_set_globals_242x();
-		omap242x_map_common_io();
-	} else if (cpu_is_omap243x()) {
-		omap2_set_globals_243x();
-		omap243x_map_common_io();
-	} else if (cpu_is_omap34xx()) {
-		omap2_set_globals_3xxx();
-		omap34xx_map_common_io();
-	} else if (cpu_is_omap44xx()) {
-		omap2_set_globals_443x();
-		omap44xx_map_common_io();
-	}
+	omap4_i2c_init();
+	omap_generic_init();
 }
 
-/* XXX This machine entry name should be updated */
-MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
-	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
-	.boot_params	= 0x80000100,
+static void __init omap3_init(void)
+{
+	omap3_i2c_init();
+	omap_generic_init();
+}
+
+#if defined(CONFIG_SOC_OMAP2420)
+static const char *omap242x_boards_compat[] __initdata = {
+	"ti,omap2420",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
 	.reserve	= omap_reserve,
-	.map_io		= omap_generic_map_io,
-	.init_early	= omap_generic_init_early,
+	.map_io		= omap242x_map_io,
+	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap2_timer,
+	.dt_compat	= omap242x_boards_compat,
+MACHINE_END
+#endif
+
+#if defined(CONFIG_SOC_OMAP2430)
+static const char *omap243x_boards_compat[] __initdata = {
+	"ti,omap2430",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
+	.reserve	= omap_reserve,
+	.map_io		= omap243x_map_io,
+	.init_early	= omap2430_init_early,
+	.init_irq	= omap2_init_irq,
+	.init_machine	= omap_generic_init,
+	.timer		= &omap2_timer,
+	.dt_compat	= omap243x_boards_compat,
+MACHINE_END
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3)
+static const char *omap3_boards_compat[] __initdata = {
+	"ti,omap3",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
+	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3430_init_early,
+	.init_irq	= omap3_init_irq,
+	.init_machine	= omap3_init,
+	.timer		= &omap3_timer,
+	.dt_compat	= omap3_boards_compat,
+MACHINE_END
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4)
+static const char *omap4_boards_compat[] __initdata = {
+	"ti,omap4",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
+	.reserve	= omap_reserve,
+	.map_io		= omap4_map_io,
+	.init_early	= omap4430_init_early,
+	.init_irq	= gic_init_irq,
+	.init_machine	= omap4_init,
+	.timer		= &omap4_timer,
+	.dt_compat	= omap4_boards_compat,
 MACHINE_END
+#endif

arch/arm/mach-omap2/board-h4.c

@@ -290,17 +290,6 @@ static struct omap_board_config_kernel h4_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&h4_lcd_config },
 };
 
-static void __init omap_h4_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
-static void __init omap_h4_init_irq(void)
-{
-	omap2_init_irq();
-}
-
 static struct at24_platform_data m24c01 = {
 	.byte_len	= SZ_1K / 8,
 	.page_size	= 16,
@@ -371,22 +360,17 @@ static void __init omap_h4_init(void)
 	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
 	omap2_usbfs_init(&h4_usb_config);
 	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
 	h4_init_flash();
 }
 
-static void __init omap_h4_map_io(void)
-{
-	omap2_set_globals_242x();
-	omap242x_map_common_io();
-}
-
 MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
-	.map_io		= omap_h4_map_io,
-	.init_early	= omap_h4_init_early,
-	.init_irq	= omap_h4_init_irq,
+	.map_io		= omap242x_map_io,
+	.init_early	= omap2420_init_early,
+	.init_irq	= omap2_init_irq,
 	.init_machine	= omap_h4_init,
 	.timer		= &omap2_timer,
 MACHINE_END

arch/arm/mach-omap2/board-igep0020.c

@@ -491,13 +491,6 @@ static struct platform_device *igep_devices[] __initdata = {
 	&igep_vwlan_device,
 };
 
-static void __init igep_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(m65kxxxxam_sdrc_params,
-				  m65kxxxxam_sdrc_params);
-}
-
 static int igep2_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -650,6 +643,8 @@ static void __init igep_init(void)
 	igep_i2c_init();
 	platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));
 	omap_serial_init();
+	omap_sdrc_init(m65kxxxxam_sdrc_params,
+				  m65kxxxxam_sdrc_params);
 	usb_musb_init(NULL);
 
 	igep_flash_init();
@@ -675,7 +670,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= igep_init_early,
+	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= igep_init,
 	.timer		= &omap3_timer,
@@ -685,7 +680,7 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= igep_init_early,
+	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= igep_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-ldp.c

@@ -193,12 +193,6 @@ static struct omap_board_config_kernel ldp_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&ldp_lcd_config },
 };
 
-static void __init omap_ldp_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
 static struct twl4030_gpio_platform_data ldp_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
@@ -325,6 +319,7 @@ static void __init omap_ldp_init(void)
 	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
 	omap_ads7846_init(1, 54, 310, NULL);
 	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
 	usb_musb_init(NULL);
 	board_nand_init(ldp_nand_partitions,
 		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
@@ -336,7 +331,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= omap_ldp_init_early,
+	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_ldp_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-n8x0.c

@@ -616,18 +616,6 @@ static struct i2c_board_info n810_i2c_board_info_2[] __initdata = {
 	},
 };
 
-static void __init n8x0_map_io(void)
-{
-	omap2_set_globals_242x();
-	omap242x_map_common_io();
-}
-
-static void __init n8x0_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	/* I2S codec port pins for McBSP block */
@@ -689,6 +677,7 @@ static void __init n8x0_init_machine(void)
 		i2c_register_board_info(2, n810_i2c_board_info_2,
 					ARRAY_SIZE(n810_i2c_board_info_2));
 	board_serial_init();
+	omap_sdrc_init(NULL, NULL);
 	gpmc_onenand_init(board_onenand_data);
 	n8x0_mmc_init();
 	n8x0_usb_init();
@@ -697,8 +686,8 @@ static void __init n8x0_init_machine(void)
 MACHINE_START(NOKIA_N800, "Nokia N800")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
-	.map_io		= n8x0_map_io,
-	.init_early	= n8x0_init_early,
+	.map_io		= omap242x_map_io,
+	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap2_timer,
@@ -707,8 +696,8 @@ MACHINE_END
 MACHINE_START(NOKIA_N810, "Nokia N810")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
-	.map_io		= n8x0_map_io,
-	.init_early	= n8x0_init_early,
+	.map_io		= omap242x_map_io,
+	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap2_timer,
@@ -717,8 +706,8 @@ MACHINE_END
 MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
-	.map_io		= n8x0_map_io,
-	.init_early	= n8x0_init_early,
+	.map_io		= omap242x_map_io,
+	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap2_timer,

arch/arm/mach-omap2/board-omap3beagle.c

@@ -444,18 +444,6 @@ static struct platform_device keys_gpio = {
 	},
 };
 
-static void __init omap3_beagle_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-}
-
-static void __init omap3_beagle_init_irq(void)
-{
-	omap3_init_irq();
-}
-
 static struct platform_device *omap3_beagle_devices[] __initdata = {
 	&leds_gpio,
 	&keys_gpio,
@@ -493,8 +481,8 @@ static void __init beagle_opp_init(void)
 	if (cpu_is_omap3630()) {
 		struct device *mpu_dev, *iva_dev;
 
-		mpu_dev = omap2_get_mpuss_device();
-		iva_dev = omap2_get_iva_device();
+		mpu_dev = omap_device_get_by_hwmod_name("mpu");
+		iva_dev = omap_device_get_by_hwmod_name("iva");
 
 		if (!mpu_dev || !iva_dev) {
 			pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
@@ -534,6 +522,8 @@ static void __init omap3_beagle_init(void)
 			ARRAY_SIZE(omap3_beagle_devices));
 	omap_display_init(&beagle_dss_data);
 	omap_serial_init();
+	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+				  mt46h32m32lf6_sdrc_params);
 
 	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
 	/* REVISIT leave DVI powered down until it's needed ... */
@@ -560,8 +550,8 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= omap3_beagle_init_early,
-	.init_irq	= omap3_beagle_init_irq,
+	.init_early	= omap3_init_early,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3_beagle_init,
 	.timer		= &omap3_secure_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3evm.c

@@ -520,12 +520,6 @@ static int __init omap3_evm_i2c_init(void)
 static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
 };
 
-static void __init omap3_evm_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
-}
-
 static struct usbhs_omap_board_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -640,6 +634,7 @@ static void __init omap3_evm_init(void)
 	omap_display_init(&omap3_evm_dss_data);
 
 	omap_serial_init();
+	omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
 
 	/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
 	usb_nop_xceiv_register();
@@ -684,7 +679,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= omap3_evm_init_early,
+	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3_evm_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-omap3logic.c

@@ -182,12 +182,6 @@ static inline void __init board_smsc911x_init(void)
 	gpmc_smsc911x_init(&board_smsc911x_data);
 }
 
-static void __init omap3logic_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -200,6 +194,7 @@ static void __init omap3logic_init(void)
 	omap3torpedo_fix_pbias_voltage();
 	omap3logic_i2c_init();
 	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
 	board_mmc_init();
 	board_smsc911x_init();
 
@@ -211,7 +206,7 @@ static void __init omap3logic_init(void)
 MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
-	.init_early	= omap3logic_init_early,
+	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3logic_init,
 	.timer		= &omap3_timer,
@@ -220,7 +215,7 @@ MACHINE_END
 MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
-	.init_early	= omap3logic_init_early,
+	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3logic_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-omap3pandora.c

@@ -525,13 +525,6 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
 	}
 };
 
-static void __init omap3pandora_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-}
-
 static void __init pandora_wl1251_init(void)
 {
 	struct wl12xx_platform_data pandora_wl1251_pdata;
@@ -593,6 +586,8 @@ static void __init omap3pandora_init(void)
 			ARRAY_SIZE(omap3pandora_devices));
 	omap_display_init(&pandora_dss_data);
 	omap_serial_init();
+	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+				  mt46h32m32lf6_sdrc_params);
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
@@ -609,7 +604,7 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= omap3pandora_init_early,
+	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3pandora_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-omap3stalker.c

@@ -428,17 +428,6 @@ static int __init omap3_stalker_i2c_init(void)
 static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
 };
 
-static void __init omap3_stalker_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
-}
-
-static void __init omap3_stalker_init_irq(void)
-{
-	omap3_init_irq();
-}
-
 static struct platform_device *omap3_stalker_devices[] __initdata = {
 	&keys_gpio,
 };
@@ -478,6 +467,7 @@ static void __init omap3_stalker_init(void)
 	omap_display_init(&omap3_stalker_dss_data);
 
 	omap_serial_init();
+	omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
@@ -496,8 +486,8 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
 	/* Maintainer: Jason Lam -lzg@ema-tech.com */
 	.boot_params		= 0x80000100,
 	.map_io			= omap3_map_io,
-	.init_early		= omap3_stalker_init_early,
-	.init_irq		= omap3_stalker_init_irq,
+	.init_early		= omap35xx_init_early,
+	.init_irq		= omap3_init_irq,
 	.init_machine		= omap3_stalker_init,
 	.timer			= &omap3_secure_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -326,18 +326,6 @@ static struct omap_board_mux board_mux[] __initdata = {
 };
 #endif
 
-static void __init omap3_touchbook_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-}
-
-static void __init omap3_touchbook_init_irq(void)
-{
-	omap3_init_irq();
-}
-
 static struct platform_device *omap3_touchbook_devices[] __initdata = {
 	&omap3_touchbook_lcd_device,
 	&leds_gpio,
@@ -385,6 +373,8 @@ static void __init omap3_touchbook_init(void)
 	platform_add_devices(omap3_touchbook_devices,
 			ARRAY_SIZE(omap3_touchbook_devices));
 	omap_serial_init();
+	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+				  mt46h32m32lf6_sdrc_params);
 
 	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
 	/* REVISIT leave DVI powered down until it's needed ... */
@@ -407,8 +397,8 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= omap3_touchbook_init_early,
-	.init_irq	= omap3_touchbook_init_irq,
+	.init_early	= omap3430_init_early,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3_touchbook_init,
 	.timer		= &omap3_secure_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap4panda.c

@@ -95,12 +95,6 @@ static struct platform_device *panda_devices[] __initdata = {
 	&wl1271_device,
 };
 
-static void __init omap4_panda_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -569,24 +563,19 @@ static void __init omap4_panda_init(void)
 	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
 	platform_device_register(&omap_vwlan_device);
 	board_serial_init();
+	omap_sdrc_init(NULL, NULL);
 	omap4_twl6030_hsmmc_init(mmc);
 	omap4_ehci_init();
 	usb_musb_init(&musb_board_data);
 	omap4_panda_display_init();
 }
 
-static void __init omap4_panda_map_io(void)
-{
-	omap2_set_globals_443x();
-	omap44xx_map_common_io();
-}
-
 MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
 	/* Maintainer: David Anders - Texas Instruments Inc */
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
-	.map_io		= omap4_panda_map_io,
-	.init_early	= omap4_panda_init_early,
+	.map_io		= omap4_map_io,
+	.init_early	= omap4430_init_early,
 	.init_irq	= gic_init_irq,
 	.init_machine	= omap4_panda_init,
 	.timer		= &omap4_timer,

arch/arm/mach-omap2/board-overo.c

@@ -478,13 +478,6 @@ static int __init overo_spi_init(void)
 	return 0;
 }
 
-static void __init overo_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-}
-
 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
@@ -514,6 +507,8 @@ static void __init overo_init(void)
 	overo_i2c_init();
 	omap_display_init(&overo_dss_data);
 	omap_serial_init();
+	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+				  mt46h32m32lf6_sdrc_params);
 	omap_nand_flash_init(0, overo_nand_partitions,
 			     ARRAY_SIZE(overo_nand_partitions));
 	usb_musb_init(NULL);
@@ -564,7 +559,7 @@ MACHINE_START(OVERO, "Gumstix Overo")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= overo_init_early,
+	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= overo_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-rm680.c

@@ -123,15 +123,6 @@ static void __init rm680_peripherals_init(void)
 	omap2_hsmmc_init(mmc);
 }
 
-static void __init rm680_init_early(void)
-{
-	struct omap_sdrc_params *sdrc_params;
-
-	omap2_init_common_infrastructure();
-	sdrc_params = nokia_get_sdram_timings();
-	omap2_init_common_devices(sdrc_params, sdrc_params);
-}
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -140,23 +131,23 @@ static struct omap_board_mux board_mux[] __initdata = {
 
 static void __init rm680_init(void)
 {
+	struct omap_sdrc_params *sdrc_params;
+
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
+
+	sdrc_params = nokia_get_sdram_timings();
+	omap_sdrc_init(sdrc_params, sdrc_params);
+
 	usb_musb_init(NULL);
 	rm680_peripherals_init();
 }
 
-static void __init rm680_map_io(void)
-{
-	omap2_set_globals_3xxx();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
-	.map_io		= rm680_map_io,
-	.init_early	= rm680_init_early,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3630_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= rm680_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-rx51.c

@@ -102,15 +102,6 @@ static struct omap_board_config_kernel rx51_config[] = {
 	{ OMAP_TAG_LCD,		&rx51_lcd_config },
 };
 
-static void __init rx51_init_early(void)
-{
-	struct omap_sdrc_params *sdrc_params;
-
-	omap2_init_common_infrastructure();
-	sdrc_params = nokia_get_sdram_timings();
-	omap2_init_common_devices(sdrc_params, sdrc_params);
-}
-
 extern void __init rx51_peripherals_init(void);
 
 #ifdef CONFIG_OMAP_MUX
@@ -127,11 +118,17 @@ static struct omap_musb_board_data musb_board_data = {
 
 static void __init rx51_init(void)
 {
+	struct omap_sdrc_params *sdrc_params;
+
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_board_config = rx51_config;
 	omap_board_config_size = ARRAY_SIZE(rx51_config);
 	omap3_pm_init_cpuidle(rx51_cpuidle_params);
 	omap_serial_init();
+
+	sdrc_params = nokia_get_sdram_timings();
+	omap_sdrc_init(sdrc_params, sdrc_params);
+
 	usb_musb_init(&musb_board_data);
 	rx51_peripherals_init();
 
@@ -142,12 +139,6 @@ static void __init rx51_init(void)
 	platform_device_register(&leds_gpio);
 }
 
-static void __init rx51_map_io(void)
-{
-	omap2_set_globals_3xxx();
-	omap34xx_map_common_io();
-}
-
 static void __init rx51_reserve(void)
 {
 	rx51_video_mem_init();
@@ -158,8 +149,8 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
 	.boot_params	= 0x80000100,
 	.reserve	= rx51_reserve,
-	.map_io		= rx51_map_io,
-	.init_early	= rx51_init_early,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= rx51_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-ti8168evm.c

@@ -27,22 +27,16 @@
 static struct omap_board_config_kernel ti8168_evm_config[] __initdata = {
 };
 
-static void __init ti8168_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
 static void __init ti8168_evm_init(void)
 {
 	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
 	omap_board_config = ti8168_evm_config;
 	omap_board_config_size = ARRAY_SIZE(ti8168_evm_config);
 }
 
 static void __init ti8168_evm_map_io(void)
 {
-	omap2_set_globals_ti816x();
 	omapti816x_map_common_io();
 }
 
@@ -50,7 +44,7 @@ MACHINE_START(TI8168EVM, "ti8168evm")
 	/* Maintainer: Texas Instruments */
 	.boot_params	= 0x80000100,
 	.map_io		= ti8168_evm_map_io,
-	.init_early	= ti8168_init_early,
+	.init_early	= ti816x_init_early,
 	.init_irq	= ti816x_init_irq,
 	.timer		= &omap3_timer,
 	.init_machine	= ti8168_evm_init,

arch/arm/mach-omap2/board-zoom.c

@@ -34,17 +34,6 @@
 
 #define ZOOM3_EHCI_RESET_GPIO		64
 
-static void __init omap_zoom_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	if (machine_is_omap_zoom2())
-		omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
-					  mt46h32m32lf6_sdrc_params);
-	else if (machine_is_omap_zoom3())
-		omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
-					  h8mbx00u0mer0em_sdrc_params);
-}
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	/* WLAN IRQ - GPIO 162 */
@@ -129,6 +118,14 @@ static void __init omap_zoom_init(void)
 						ZOOM_NAND_CS, NAND_BUSWIDTH_16);
 	zoom_debugboard_init();
 	zoom_peripherals_init();
+
+	if (machine_is_omap_zoom2())
+		omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+					  mt46h32m32lf6_sdrc_params);
+	else if (machine_is_omap_zoom3())
+		omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
+					  h8mbx00u0mer0em_sdrc_params);
+
 	zoom_display_init();
 }
 
@@ -136,7 +133,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= omap_zoom_init_early,
+	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_zoom_init,
 	.timer		= &omap3_timer,
@@ -146,7 +143,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= omap_zoom_init_early,
+	.init_early	= omap3630_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_zoom_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/clock2420_data.c

@@ -1898,6 +1898,54 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_242X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_242X),
 	CLK("musb-hdrc",	"fck",	&osc_ck,	CK_242X),
+	CLK("omap_timer.1",	"fck",	&gpt1_fck,	CK_242X),
+	CLK("omap_timer.2",	"fck",	&gpt2_fck,	CK_242X),
+	CLK("omap_timer.3",	"fck",	&gpt3_fck,	CK_242X),
+	CLK("omap_timer.4",	"fck",	&gpt4_fck,	CK_242X),
+	CLK("omap_timer.5",	"fck",	&gpt5_fck,	CK_242X),
+	CLK("omap_timer.6",	"fck",	&gpt6_fck,	CK_242X),
+	CLK("omap_timer.7",	"fck",	&gpt7_fck,	CK_242X),
+	CLK("omap_timer.8",	"fck",	&gpt8_fck,	CK_242X),
+	CLK("omap_timer.9",	"fck",	&gpt9_fck,	CK_242X),
+	CLK("omap_timer.10",	"fck",	&gpt10_fck,	CK_242X),
+	CLK("omap_timer.11",	"fck",	&gpt11_fck,	CK_242X),
+	CLK("omap_timer.12",	"fck",	&gpt12_fck,	CK_242X),
+	CLK("omap_timer.1",	"32k_ck",	&func_32k_ck,	CK_243X),
+	CLK("omap_timer.2",	"32k_ck",	&func_32k_ck,	CK_243X),
+	CLK("omap_timer.3",	"32k_ck",	&func_32k_ck,	CK_243X),
+	CLK("omap_timer.4",	"32k_ck",	&func_32k_ck,	CK_243X),
+	CLK("omap_timer.5",	"32k_ck",	&func_32k_ck,	CK_243X),
+	CLK("omap_timer.6",	"32k_ck",	&func_32k_ck,	CK_243X),
+	CLK("omap_timer.7",	"32k_ck",	&func_32k_ck,	CK_243X),
+	CLK("omap_timer.8",	"32k_ck",	&func_32k_ck,	CK_243X),
+	CLK("omap_timer.9",	"32k_ck",	&func_32k_ck,	CK_243X),
+	CLK("omap_timer.10",	"32k_ck",	&func_32k_ck,	CK_243X),
+	CLK("omap_timer.11",	"32k_ck",	&func_32k_ck,	CK_243X),
+	CLK("omap_timer.12",	"32k_ck",	&func_32k_ck,	CK_243X),
+	CLK("omap_timer.1",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.2",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.3",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.4",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.5",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.6",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.7",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.8",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.9",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.10",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.11",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.12",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.1",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.2",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.3",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.4",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.5",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.6",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.7",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.8",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.9",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.10",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.11",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.12",	"alt_ck",	&alt_ck,	CK_243X),
 };
 
 /*

arch/arm/mach-omap2/clock2430_data.c

@@ -1998,6 +1998,54 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"mdm_intc_ick",	&mdm_intc_ick,	CK_243X),
 	CLK("omap_hsmmc.0", "mmchsdb_fck",	&mmchsdb1_fck,	CK_243X),
 	CLK("omap_hsmmc.1", "mmchsdb_fck",	&mmchsdb2_fck,	CK_243X),
+	CLK("omap_timer.1",     "fck",  &gpt1_fck,      CK_243X),
+	CLK("omap_timer.2",     "fck",  &gpt2_fck,      CK_243X),
+	CLK("omap_timer.3",     "fck",  &gpt3_fck,      CK_243X),
+	CLK("omap_timer.4",     "fck",  &gpt4_fck,      CK_243X),
+	CLK("omap_timer.5",     "fck",  &gpt5_fck,      CK_243X),
+	CLK("omap_timer.6",     "fck",  &gpt6_fck,      CK_243X),
+	CLK("omap_timer.7",     "fck",  &gpt7_fck,      CK_243X),
+	CLK("omap_timer.8",     "fck",  &gpt8_fck,      CK_243X),
+	CLK("omap_timer.9",     "fck",  &gpt9_fck,      CK_243X),
+	CLK("omap_timer.10",    "fck",  &gpt10_fck,     CK_243X),
+	CLK("omap_timer.11",    "fck",  &gpt11_fck,     CK_243X),
+	CLK("omap_timer.12",    "fck",  &gpt12_fck,     CK_243X),
+	CLK("omap_timer.1",	"32k_ck",  &func_32k_ck,   CK_243X),
+	CLK("omap_timer.2",	"32k_ck",  &func_32k_ck,   CK_243X),
+	CLK("omap_timer.3",	"32k_ck",  &func_32k_ck,   CK_243X),
+	CLK("omap_timer.4",	"32k_ck",  &func_32k_ck,   CK_243X),
+	CLK("omap_timer.5",	"32k_ck",  &func_32k_ck,   CK_243X),
+	CLK("omap_timer.6",	"32k_ck",  &func_32k_ck,   CK_243X),
+	CLK("omap_timer.7",	"32k_ck",  &func_32k_ck,   CK_243X),
+	CLK("omap_timer.8",	"32k_ck",  &func_32k_ck,   CK_243X),
+	CLK("omap_timer.9",	"32k_ck",  &func_32k_ck,   CK_243X),
+	CLK("omap_timer.10",	"32k_ck",  &func_32k_ck,   CK_243X),
+	CLK("omap_timer.11",	"32k_ck",  &func_32k_ck,   CK_243X),
+	CLK("omap_timer.12",	"32k_ck",  &func_32k_ck,   CK_243X),
+	CLK("omap_timer.1",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.2",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.3",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.4",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.5",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.6",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.7",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.8",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.9",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.10",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.11",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.12",	"sys_ck",	&sys_ck,	CK_243X),
+	CLK("omap_timer.1",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.2",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.3",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.4",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.5",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.6",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.7",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.8",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.9",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.10",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.11",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap_timer.12",	"alt_ck",	&alt_ck,	CK_243X),
 };
 
 /*

arch/arm/mach-omap2/clock3xxx_data.c

@@ -3464,6 +3464,42 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK("musb-am35x",	"fck",		&hsotgusb_fck_am35xx,	CK_AM35XX),
 	CLK(NULL,	"hecc_ck",	&hecc_ck,	CK_AM35XX),
 	CLK(NULL,	"uart4_ick",	&uart4_ick_am35xx,	CK_AM35XX),
+	CLK("omap_timer.1",	"fck",	&gpt1_fck,	CK_3XXX),
+	CLK("omap_timer.2",	"fck",	&gpt2_fck,	CK_3XXX),
+	CLK("omap_timer.3",	"fck",	&gpt3_fck,	CK_3XXX),
+	CLK("omap_timer.4",	"fck",	&gpt4_fck,	CK_3XXX),
+	CLK("omap_timer.5",	"fck",	&gpt5_fck,	CK_3XXX),
+	CLK("omap_timer.6",	"fck",	&gpt6_fck,	CK_3XXX),
+	CLK("omap_timer.7",	"fck",	&gpt7_fck,	CK_3XXX),
+	CLK("omap_timer.8",	"fck",	&gpt8_fck,	CK_3XXX),
+	CLK("omap_timer.9",	"fck",	&gpt9_fck,	CK_3XXX),
+	CLK("omap_timer.10",    "fck",  &gpt10_fck,     CK_3XXX),
+	CLK("omap_timer.11",    "fck",  &gpt11_fck,     CK_3XXX),
+	CLK("omap_timer.12",    "fck",  &gpt12_fck,     CK_3XXX),
+	CLK("omap_timer.1",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
+	CLK("omap_timer.2",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
+	CLK("omap_timer.3",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
+	CLK("omap_timer.4",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
+	CLK("omap_timer.5",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
+	CLK("omap_timer.6",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
+	CLK("omap_timer.7",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
+	CLK("omap_timer.8",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
+	CLK("omap_timer.9",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
+	CLK("omap_timer.10",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
+	CLK("omap_timer.11",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
+	CLK("omap_timer.12",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
+	CLK("omap_timer.1",	"sys_ck",	&sys_ck,	CK_3XXX),
+	CLK("omap_timer.2",	"sys_ck",	&sys_ck,	CK_3XXX),
+	CLK("omap_timer.3",	"sys_ck",	&sys_ck,	CK_3XXX),
+	CLK("omap_timer.4",	"sys_ck",	&sys_ck,	CK_3XXX),
+	CLK("omap_timer.5",	"sys_ck",	&sys_ck,	CK_3XXX),
+	CLK("omap_timer.6",	"sys_ck",	&sys_ck,	CK_3XXX),
+	CLK("omap_timer.7",	"sys_ck",	&sys_ck,	CK_3XXX),
+	CLK("omap_timer.8",	"sys_ck",	&sys_ck,	CK_3XXX),
+	CLK("omap_timer.9",	"sys_ck",	&sys_ck,	CK_3XXX),
+	CLK("omap_timer.10",	"sys_ck",	&sys_ck,	CK_3XXX),
+	CLK("omap_timer.11",	"sys_ck",	&sys_ck,	CK_3XXX),
+	CLK("omap_timer.12",	"sys_ck",	&sys_ck,	CK_3XXX),
 };
 
 
@@ -3472,7 +3508,16 @@ int __init omap3xxx_clk_init(void)
 	struct omap_clk *c;
 	u32 cpu_clkflg = 0;
 
-	if (cpu_is_omap3517()) {
+	/*
+	 * 3505 must be tested before 3517, since 3517 returns true
+	 * for both AM3517 chips and AM3517 family chips, which
+	 * includes 3505.  Unfortunately there's no obvious family
+	 * test for 3517/3505 :-(
+	 */
+	if (cpu_is_omap3505()) {
+		cpu_mask = RATE_IN_34XX;
+		cpu_clkflg = CK_3505;
+	} else if (cpu_is_omap3517()) {
 		cpu_mask = RATE_IN_34XX;
 		cpu_clkflg = CK_3517;
 	} else if (cpu_is_omap3505()) {

arch/arm/mach-omap2/clock44xx_data.c

@@ -3363,6 +3363,39 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK("usbhs-omap.0",	"usbhost_ick",		&dummy_ck,		CK_443X),
 	CLK("usbhs-omap.0",	"usbtll_fck",		&dummy_ck,	CK_443X),
 	CLK("omap_wdt",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap_timer.1",	"fck",			&timer1_fck,	CK_443X),
+	CLK("omap_timer.2",	"fck",			&timer2_fck,	CK_443X),
+	CLK("omap_timer.3",	"fck",			&timer3_fck,	CK_443X),
+	CLK("omap_timer.4",	"fck",			&timer4_fck,	CK_443X),
+	CLK("omap_timer.5",	"fck",			&timer5_fck,	CK_443X),
+	CLK("omap_timer.6",	"fck",			&timer6_fck,	CK_443X),
+	CLK("omap_timer.7",	"fck",			&timer7_fck,	CK_443X),
+	CLK("omap_timer.8",	"fck",			&timer8_fck,	CK_443X),
+	CLK("omap_timer.9",	"fck",			&timer9_fck,	CK_443X),
+	CLK("omap_timer.10",	"fck",			&timer10_fck,	CK_443X),
+	CLK("omap_timer.11",	"fck",			&timer11_fck,	CK_443X),
+	CLK("omap_timer.1",	"32k_ck",	&sys_32k_ck,	CK_443X),
+	CLK("omap_timer.2",	"32k_ck",	&sys_32k_ck,	CK_443X),
+	CLK("omap_timer.3",	"32k_ck",	&sys_32k_ck,	CK_443X),
+	CLK("omap_timer.4",	"32k_ck",	&sys_32k_ck,	CK_443X),
+	CLK("omap_timer.5",	"32k_ck",	&sys_32k_ck,	CK_443X),
+	CLK("omap_timer.6",	"32k_ck",	&sys_32k_ck,	CK_443X),
+	CLK("omap_timer.7",	"32k_ck",	&sys_32k_ck,	CK_443X),
+	CLK("omap_timer.8",	"32k_ck",	&sys_32k_ck,	CK_443X),
+	CLK("omap_timer.9",	"32k_ck",	&sys_32k_ck,	CK_443X),
+	CLK("omap_timer.10",	"32k_ck",	&sys_32k_ck,	CK_443X),
+	CLK("omap_timer.11",	"32k_ck",	&sys_32k_ck,	CK_443X),
+	CLK("omap_timer.1",	"sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("omap_timer.2",	"sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("omap_timer.3",	"sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("omap_timer.4",	"sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("omap_timer.9",	"sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("omap_timer.10",	"sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("omap_timer.11",	"sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("omap_timer.5",	"sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("omap_timer.6",	"sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("omap_timer.7",	"sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("omap_timer.8",	"sys_ck",	&syc_clk_div_ck,	CK_443X),
 };
 
 int __init omap4xxx_clk_init(void)

arch/arm/mach-omap2/clockdomain.c

@@ -73,9 +73,6 @@ static int _clkdm_register(struct clockdomain *clkdm)
 	if (!clkdm || !clkdm->name)
 		return -EINVAL;
 
-	if (!omap_chip_is(clkdm->omap_chip))
-		return -EINVAL;
-
 	pwrdm = pwrdm_lookup(clkdm->pwrdm.name);
 	if (!pwrdm) {
 		pr_err("clockdomain: %s: powerdomain %s does not exist\n",
@@ -105,13 +102,10 @@ static struct clkdm_dep *_clkdm_deps_lookup(struct clockdomain *clkdm,
 {
 	struct clkdm_dep *cd;
 
-	if (!clkdm || !deps || !omap_chip_is(clkdm->omap_chip))
+	if (!clkdm || !deps)
 		return ERR_PTR(-EINVAL);
 
 	for (cd = deps; cd->clkdm_name; cd++) {
-		if (!omap_chip_is(cd->omap_chip))
-			continue;
-
 		if (!cd->clkdm && cd->clkdm_name)
 			cd->clkdm = _clkdm_lookup(cd->clkdm_name);
 
@@ -148,9 +142,6 @@ static void _autodep_lookup(struct clkdm_autodep *autodep)
 	if (!autodep)
 		return;
 
-	if (!omap_chip_is(autodep->omap_chip))
-		return;
-
 	clkdm = clkdm_lookup(autodep->clkdm.name);
 	if (!clkdm) {
 		pr_err("clockdomain: autodeps: clockdomain %s does not exist\n",
@@ -182,9 +173,6 @@ void _clkdm_add_autodeps(struct clockdomain *clkdm)
 		if (IS_ERR(autodep->clkdm.ptr))
 			continue;
 
-		if (!omap_chip_is(autodep->omap_chip))
-			continue;
-
 		pr_debug("clockdomain: adding %s sleepdep/wkdep for "
 			 "clkdm %s\n", autodep->clkdm.ptr->name,
 			 clkdm->name);
@@ -216,9 +204,6 @@ void _clkdm_del_autodeps(struct clockdomain *clkdm)
 		if (IS_ERR(autodep->clkdm.ptr))
 			continue;
 
-		if (!omap_chip_is(autodep->omap_chip))
-			continue;
-
 		pr_debug("clockdomain: removing %s sleepdep/wkdep for "
 			 "clkdm %s\n", autodep->clkdm.ptr->name,
 			 clkdm->name);
@@ -243,8 +228,6 @@ static void _resolve_clkdm_deps(struct clockdomain *clkdm,
 	struct clkdm_dep *cd;
 
 	for (cd = clkdm_deps; cd && cd->clkdm_name; cd++) {
-		if (!omap_chip_is(cd->omap_chip))
-			continue;
 		if (cd->clkdm)
 			continue;
 		cd->clkdm = _clkdm_lookup(cd->clkdm_name);
@@ -257,43 +240,113 @@ static void _resolve_clkdm_deps(struct clockdomain *clkdm,
 /* Public functions */
 
 /**
- * clkdm_init - set up the clockdomain layer
- * @clkdms: optional pointer to an array of clockdomains to register
- * @init_autodeps: optional pointer to an array of autodeps to register
- * @custom_funcs: func pointers for arch specific implementations
+ * clkdm_register_platform_funcs - register clockdomain implementation fns
+ * @co: func pointers for arch specific implementations
  *
- * Set up internal state.  If a pointer to an array of clockdomains
- * @clkdms was supplied, loop through the list of clockdomains,
- * register all that are available on the current platform. Similarly,
- * if a pointer to an array of clockdomain autodependencies
- * @init_autodeps was provided, register those.  No return value.
+ * Register the list of function pointers used to implement the
+ * clockdomain functions on different OMAP SoCs.  Should be called
+ * before any other clkdm_register*() function.  Returns -EINVAL if
+ * @co is null, -EEXIST if platform functions have already been
+ * registered, or 0 upon success.
  */
-void clkdm_init(struct clockdomain **clkdms,
-		struct clkdm_autodep *init_autodeps,
-		struct clkdm_ops *custom_funcs)
+int clkdm_register_platform_funcs(struct clkdm_ops *co)
+{
+	if (!co)
+		return -EINVAL;
+
+	if (arch_clkdm)
+		return -EEXIST;
+
+	arch_clkdm = co;
+
+	return 0;
+};
+
+/**
+ * clkdm_register_clkdms - register SoC clockdomains
+ * @cs: pointer to an array of struct clockdomain to register
+ *
+ * Register the clockdomains available on a particular OMAP SoC.  Must
+ * be called after clkdm_register_platform_funcs().  May be called
+ * multiple times.  Returns -EACCES if called before
+ * clkdm_register_platform_funcs(); -EINVAL if the argument @cs is
+ * null; or 0 upon success.
+ */
+int clkdm_register_clkdms(struct clockdomain **cs)
 {
 	struct clockdomain **c = NULL;
-	struct clockdomain *clkdm;
-	struct clkdm_autodep *autodep = NULL;
 
-	if (!custom_funcs)
-		WARN(1, "No custom clkdm functions registered\n");
-	else
-		arch_clkdm = custom_funcs;
+	if (!arch_clkdm)
+		return -EACCES;
+
+	if (!cs)
+		return -EINVAL;
 
-	if (clkdms)
-		for (c = clkdms; *c; c++)
+	for (c = cs; *c; c++)
 		_clkdm_register(*c);
 
-	autodeps = init_autodeps;
+	return 0;
+}
+
+/**
+ * clkdm_register_autodeps - register autodeps (if required)
+ * @ia: pointer to a static array of struct clkdm_autodep to register
+ *
+ * Register clockdomain "automatic dependencies."  These are
+ * clockdomain wakeup and sleep dependencies that are automatically
+ * added whenever the first clock inside a clockdomain is enabled, and
+ * removed whenever the last clock inside a clockdomain is disabled.
+ * These are currently only used on OMAP3 devices, and are deprecated,
+ * since they waste energy.  However, until the OMAP2/3 IP block
+ * enable/disable sequence can be converted to match the OMAP4
+ * sequence, they are needed.
+ *
+ * Must be called only after all of the SoC clockdomains are
+ * registered, since the function will resolve autodep clockdomain
+ * names into clockdomain pointers.
+ *
+ * The struct clkdm_autodep @ia array must be static, as this function
+ * does not copy the array elements.
+ *
+ * Returns -EACCES if called before any clockdomains have been
+ * registered, -EINVAL if called with a null @ia argument, -EEXIST if
+ * autodeps have already been registered, or 0 upon success.
+ */
+int clkdm_register_autodeps(struct clkdm_autodep *ia)
+{
+	struct clkdm_autodep *a = NULL;
+
+	if (list_empty(&clkdm_list))
+		return -EACCES;
+
+	if (!ia)
+		return -EINVAL;
+
 	if (autodeps)
-		for (autodep = autodeps; autodep->clkdm.ptr; autodep++)
-			_autodep_lookup(autodep);
+		return -EEXIST;
 
-	/*
-	 * Put all clockdomains into software-supervised mode; PM code
-	 * should later enable hardware-supervised mode as appropriate
+	autodeps = ia;
+	for (a = autodeps; a->clkdm.ptr; a++)
+		_autodep_lookup(a);
+
+	return 0;
+}
+
+/**
+ * clkdm_complete_init - set up the clockdomain layer
+ *
+ * Put all clockdomains into software-supervised mode; PM code should
+ * later enable hardware-supervised mode as appropriate.  Must be
+ * called after clkdm_register_clkdms().  Returns -EACCES if called
+ * before clkdm_register_clkdms(), or 0 upon success.
  */
+int clkdm_complete_init(void)
+{
+	struct clockdomain *clkdm;
+
+	if (list_empty(&clkdm_list))
+		return -EACCES;
+
 	list_for_each_entry(clkdm, &clkdm_list, node) {
 		if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
 			clkdm_wakeup(clkdm);
@@ -306,6 +359,8 @@ void clkdm_init(struct clockdomain **clkdms,
 		_resolve_clkdm_deps(clkdm, clkdm->sleepdep_srcs);
 		clkdm_clear_all_sleepdeps(clkdm);
 	}
+
+	return 0;
 }
 
 /**

arch/arm/mach-omap2/clockdomain.h

@@ -45,7 +45,6 @@
 /**
  * struct clkdm_autodep - clkdm deps to add when entering/exiting hwsup mode
  * @clkdm: clockdomain to add wkdep+sleepdep on - set name member only
- * @omap_chip: OMAP chip types that this autodep is valid on
  *
  * A clockdomain that should have wkdeps and sleepdeps added when a
  * clockdomain should stay active in hwsup mode; and conversely,
@@ -60,14 +59,12 @@ struct clkdm_autodep {
 		const char *name;
 		struct clockdomain *ptr;
 	} clkdm;
-	const struct omap_chip_id omap_chip;
 };
 
 /**
  * struct clkdm_dep - encode dependencies between clockdomains
  * @clkdm_name: clockdomain name
  * @clkdm: pointer to the struct clockdomain of @clkdm_name
- * @omap_chip: OMAP chip types that this dependency is valid on
  * @wkdep_usecount: Number of wakeup dependencies causing this clkdm to wake
  * @sleepdep_usecount: Number of sleep deps that could prevent clkdm from idle
  *
@@ -81,7 +78,6 @@ struct clkdm_dep {
 	struct clockdomain *clkdm;
 	atomic_t wkdep_usecount;
 	atomic_t sleepdep_usecount;
-	const struct omap_chip_id omap_chip;
 };
 
 /* Possible flags for struct clockdomain._flags */
@@ -101,7 +97,6 @@ struct clkdm_dep {
  * @clkdm_offs: (OMAP4 only) CM clockdomain register offset
  * @wkdep_srcs: Clockdomains that can be told to wake this powerdomain up
  * @sleepdep_srcs: Clockdomains that can be told to keep this clkdm from inact
- * @omap_chip: OMAP chip types that this clockdomain is valid on
  * @usecount: Usecount tracking
  * @node: list_head to link all clockdomains together
  *
@@ -126,7 +121,6 @@ struct clockdomain {
 	const u16 clkdm_offs;
 	struct clkdm_dep *wkdep_srcs;
 	struct clkdm_dep *sleepdep_srcs;
-	const struct omap_chip_id omap_chip;
 	atomic_t usecount;
 	struct list_head node;
 	spinlock_t lock;
@@ -166,8 +160,11 @@ struct clkdm_ops {
 	int	(*clkdm_clk_disable)(struct clockdomain *clkdm);
 };
 
-void clkdm_init(struct clockdomain **clkdms, struct clkdm_autodep *autodeps,
-			struct clkdm_ops *custom_funcs);
+int clkdm_register_platform_funcs(struct clkdm_ops *co);
+int clkdm_register_autodeps(struct clkdm_autodep *ia);
+int clkdm_register_clkdms(struct clockdomain **c);
+int clkdm_complete_init(void);
+
 struct clockdomain *clkdm_lookup(const char *name);
 
 int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
@@ -195,7 +192,8 @@ int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk);
 int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh);
 int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh);
 
-extern void __init omap2xxx_clockdomains_init(void);
+extern void __init omap242x_clockdomains_init(void);
+extern void __init omap243x_clockdomains_init(void);
 extern void __init omap3xxx_clockdomains_init(void);
 extern void __init omap44xx_clockdomains_init(void);
 extern void _clkdm_add_autodeps(struct clockdomain *clkdm);
@@ -205,4 +203,10 @@ extern struct clkdm_ops omap2_clkdm_operations;
 extern struct clkdm_ops omap3_clkdm_operations;
 extern struct clkdm_ops omap4_clkdm_operations;
 
+extern struct clkdm_dep gfx_24xx_wkdeps[];
+extern struct clkdm_dep dsp_24xx_wkdeps[];
+extern struct clockdomain wkup_common_clkdm;
+extern struct clockdomain prm_common_clkdm;
+extern struct clockdomain cm_common_clkdm;
+
 #endif

arch/arm/mach-omap2/clockdomain2xxx_3xxx.c

@@ -52,8 +52,6 @@ static int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
 	u32 mask = 0;
 
 	for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
-		if (!omap_chip_is(cd->omap_chip))
-			continue;
 		if (!cd->clkdm)
 			continue; /* only happens if data is erroneous */
 
@@ -98,8 +96,6 @@ static int omap3_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
 	u32 mask = 0;
 
 	for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
-		if (!omap_chip_is(cd->omap_chip))
-			continue;
 		if (!cd->clkdm)
 			continue; /* only happens if data is erroneous */
 

arch/arm/mach-omap2/clockdomain44xx.c

@@ -52,8 +52,6 @@ static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
 	u32 mask = 0;
 
 	for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
-		if (!omap_chip_is(cd->omap_chip))
-			continue;
 		if (!cd->clkdm)
 			continue; /* only happens if data is erroneous */
 

arch/arm/mach-omap2/clockdomains2420_data.c

+/*
+ * OMAP2420 clockdomains
+ *
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup dependencies
+ * for OMAP2420 chips.  Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs must have a dep_bit assigned.  So
+ * wkdep_srcs are really just software-controllable dependencies.
+ * Non-software-controllable dependencies do exist, but they are not
+ * encoded below (yet).
+ *
+ * 24xx does not support programmable sleep dependencies (SLEEPDEP)
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}.  The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ *    from the Power domain framework
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-24xx.h"
+#include "prm-regbits-24xx.h"
+
+/*
+ * Clockdomain dependencies for wkdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* Wakeup dependency source arrays */
+
+/* 2420-specific possible wakeup dependencies */
+
+/* 2420 PM_WKDEP_MPU: CORE, DSP, WKUP */
+static struct clkdm_dep mpu_2420_wkdeps[] = {
+	{ .clkdm_name = "core_l3_clkdm" },
+	{ .clkdm_name = "core_l4_clkdm" },
+	{ .clkdm_name = "dsp_clkdm" },
+	{ .clkdm_name = "wkup_clkdm" },
+	{ NULL },
+};
+
+/* 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP */
+static struct clkdm_dep core_2420_wkdeps[] = {
+	{ .clkdm_name = "dsp_clkdm" },
+	{ .clkdm_name = "gfx_clkdm" },
+	{ .clkdm_name = "mpu_clkdm" },
+	{ .clkdm_name = "wkup_clkdm" },
+	{ NULL },
+};
+
+/*
+ * 2420-only clockdomains
+ */
+
+static struct clockdomain mpu_2420_clkdm = {
+	.name		= "mpu_clkdm",
+	.pwrdm		= { .name = "mpu_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.wkdep_srcs	= mpu_2420_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
+};
+
+static struct clockdomain iva1_2420_clkdm = {
+	.name		= "iva1_clkdm",
+	.pwrdm		= { .name = "dsp_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.dep_bit	= OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+	.wkdep_srcs	= dsp_24xx_wkdeps,
+	.clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
+};
+
+static struct clockdomain dsp_2420_clkdm = {
+	.name		= "dsp_clkdm",
+	.pwrdm		= { .name = "dsp_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
+};
+
+static struct clockdomain gfx_2420_clkdm = {
+	.name		= "gfx_clkdm",
+	.pwrdm		= { .name = "gfx_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.wkdep_srcs	= gfx_24xx_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
+};
+
+static struct clockdomain core_l3_2420_clkdm = {
+	.name		= "core_l3_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.wkdep_srcs	= core_2420_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
+};
+
+static struct clockdomain core_l4_2420_clkdm = {
+	.name		= "core_l4_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.wkdep_srcs	= core_2420_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
+};
+
+static struct clockdomain dss_2420_clkdm = {
+	.name		= "dss_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
+};
+
+static struct clockdomain *clockdomains_omap242x[] __initdata = {
+	&wkup_common_clkdm,
+	&cm_common_clkdm,
+	&prm_common_clkdm,
+	&mpu_2420_clkdm,
+	&iva1_2420_clkdm,
+	&dsp_2420_clkdm,
+	&gfx_2420_clkdm,
+	&core_l3_2420_clkdm,
+	&core_l4_2420_clkdm,
+	&dss_2420_clkdm,
+	NULL,
+};
+
+void __init omap242x_clockdomains_init(void)
+{
+	if (!cpu_is_omap242x())
+		return;
+
+	clkdm_register_platform_funcs(&omap2_clkdm_operations);
+	clkdm_register_clkdms(clockdomains_omap242x);
+	clkdm_complete_init();
+}

arch/arm/mach-omap2/clockdomains2430_data.c

+/*
+ * OMAP2xxx clockdomains
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup dependencies
+ * for OMAP2xxx chips.  Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs must have a dep_bit assigned.  So
+ * wkdep_srcs are really just software-controllable dependencies.
+ * Non-software-controllable dependencies do exist, but they are not
+ * encoded below (yet).
+ *
+ * 24xx does not support programmable sleep dependencies (SLEEPDEP)
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}.  The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ *    from the Power domain framework
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-24xx.h"
+#include "prm-regbits-24xx.h"
+
+/*
+ * Clockdomain dependencies for wkdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* Wakeup dependency source arrays */
+
+/* 2430-specific possible wakeup dependencies */
+
+/* 2430 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP, MDM */
+static struct clkdm_dep core_2430_wkdeps[] = {
+	{ .clkdm_name = "dsp_clkdm" },
+	{ .clkdm_name = "gfx_clkdm" },
+	{ .clkdm_name = "mpu_clkdm" },
+	{ .clkdm_name = "wkup_clkdm" },
+	{ .clkdm_name = "mdm_clkdm" },
+	{ NULL },
+};
+
+/* 2430 PM_WKDEP_MPU: CORE, DSP, WKUP, MDM */
+static struct clkdm_dep mpu_2430_wkdeps[] = {
+	{ .clkdm_name = "core_l3_clkdm" },
+	{ .clkdm_name = "core_l4_clkdm" },
+	{ .clkdm_name = "dsp_clkdm" },
+	{ .clkdm_name = "wkup_clkdm" },
+	{ .clkdm_name = "mdm_clkdm" },
+	{ NULL },
+};
+
+/* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */
+static struct clkdm_dep mdm_2430_wkdeps[] = {
+	{ .clkdm_name = "core_l3_clkdm" },
+	{ .clkdm_name = "core_l4_clkdm" },
+	{ .clkdm_name = "mpu_clkdm" },
+	{ .clkdm_name = "wkup_clkdm" },
+	{ NULL },
+};
+
+/*
+ * 2430-only clockdomains
+ */
+
+static struct clockdomain mpu_2430_clkdm = {
+	.name		= "mpu_clkdm",
+	.pwrdm		= { .name = "mpu_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.wkdep_srcs	= mpu_2430_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
+};
+
+/* Another case of bit name collisions between several registers: EN_MDM */
+static struct clockdomain mdm_clkdm = {
+	.name		= "mdm_clkdm",
+	.pwrdm		= { .name = "mdm_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.dep_bit	= OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
+	.wkdep_srcs	= mdm_2430_wkdeps,
+	.clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
+};
+
+static struct clockdomain dsp_2430_clkdm = {
+	.name		= "dsp_clkdm",
+	.pwrdm		= { .name = "dsp_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.dep_bit	= OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+	.wkdep_srcs	= dsp_24xx_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
+};
+
+static struct clockdomain gfx_2430_clkdm = {
+	.name		= "gfx_clkdm",
+	.pwrdm		= { .name = "gfx_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.wkdep_srcs	= gfx_24xx_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l3_2430_clkdm = {
+	.name		= "core_l3_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.dep_bit	= OMAP24XX_EN_CORE_SHIFT,
+	.wkdep_srcs	= core_2430_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l4_2430_clkdm = {
+	.name		= "core_l4_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.dep_bit	= OMAP24XX_EN_CORE_SHIFT,
+	.wkdep_srcs	= core_2430_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
+};
+
+static struct clockdomain dss_2430_clkdm = {
+	.name		= "dss_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
+};
+
+static struct clockdomain *clockdomains_omap243x[] __initdata = {
+	&wkup_common_clkdm,
+	&cm_common_clkdm,
+	&prm_common_clkdm,
+	&mpu_2430_clkdm,
+	&mdm_clkdm,
+	&dsp_2430_clkdm,
+	&gfx_2430_clkdm,
+	&core_l3_2430_clkdm,
+	&core_l4_2430_clkdm,
+	&dss_2430_clkdm,
+	NULL,
+};
+
+void __init omap243x_clockdomains_init(void)
+{
+	if (!cpu_is_omap243x())
+		return;
+
+	clkdm_register_platform_funcs(&omap2_clkdm_operations);
+	clkdm_register_clkdms(clockdomains_omap243x);
+	clkdm_complete_init();
+}
+

arch/arm/mach-omap2/clockdomains3xxx_data.c

+/*
+ * OMAP3xxx clockdomains
+ *
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup/sleep
+ * dependencies for the OMAP3xxx chips.  Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs or sleepdep_srcs array must have a
+ * dep_bit assigned.  So wkdep_srcs/sleepdep_srcs are really just
+ * software-controllable dependencies.  Non-software-controllable
+ * dependencies do exist, but they are not encoded below (yet).
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}.  The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ *    from the Power domain framework
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+
+/*
+ * Clockdomain dependencies for wkdeps/sleepdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* OMAP3-specific possible dependencies */
+
+/*
+ * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
+ * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
+ */
+static struct clkdm_dep gfx_sgx_3xxx_wkdeps[] = {
+	{ .clkdm_name = "iva2_clkdm", },
+	{ .clkdm_name = "mpu_clkdm", },
+	{ .clkdm_name = "wkup_clkdm", },
+	{ NULL },
+};
+
+/* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */
+static struct clkdm_dep per_wkdeps[] = {
+	{ .clkdm_name = "core_l3_clkdm" },
+	{ .clkdm_name = "core_l4_clkdm" },
+	{ .clkdm_name = "iva2_clkdm" },
+	{ .clkdm_name = "mpu_clkdm" },
+	{ .clkdm_name = "wkup_clkdm" },
+	{ NULL },
+};
+
+/* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */
+static struct clkdm_dep usbhost_wkdeps[] = {
+	{ .clkdm_name = "core_l3_clkdm" },
+	{ .clkdm_name = "core_l4_clkdm" },
+	{ .clkdm_name = "iva2_clkdm" },
+	{ .clkdm_name = "mpu_clkdm" },
+	{ .clkdm_name = "wkup_clkdm" },
+	{ NULL },
+};
+
+/* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */
+static struct clkdm_dep mpu_3xxx_wkdeps[] = {
+	{ .clkdm_name = "core_l3_clkdm" },
+	{ .clkdm_name = "core_l4_clkdm" },
+	{ .clkdm_name = "iva2_clkdm" },
+	{ .clkdm_name = "dss_clkdm" },
+	{ .clkdm_name = "per_clkdm" },
+	{ NULL },
+};
+
+/* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */
+static struct clkdm_dep iva2_wkdeps[] = {
+	{ .clkdm_name = "core_l3_clkdm" },
+	{ .clkdm_name = "core_l4_clkdm" },
+	{ .clkdm_name = "mpu_clkdm" },
+	{ .clkdm_name = "wkup_clkdm" },
+	{ .clkdm_name = "dss_clkdm" },
+	{ .clkdm_name = "per_clkdm" },
+	{ NULL },
+};
+
+/* 3430 PM_WKDEP_CAM: IVA2, MPU, WKUP */
+static struct clkdm_dep cam_wkdeps[] = {
+	{ .clkdm_name = "iva2_clkdm" },
+	{ .clkdm_name = "mpu_clkdm" },
+	{ .clkdm_name = "wkup_clkdm" },
+	{ NULL },
+};
+
+/* 3430 PM_WKDEP_DSS: IVA2, MPU, WKUP */
+static struct clkdm_dep dss_wkdeps[] = {
+	{ .clkdm_name = "iva2_clkdm" },
+	{ .clkdm_name = "mpu_clkdm" },
+	{ .clkdm_name = "wkup_clkdm" },
+	{ NULL },
+};
+
+/* 3430: PM_WKDEP_NEON: MPU */
+static struct clkdm_dep neon_wkdeps[] = {
+	{ .clkdm_name = "mpu_clkdm" },
+	{ NULL },
+};
+
+/* Sleep dependency source arrays for OMAP3-specific clkdms */
+
+/* 3430: CM_SLEEPDEP_DSS: MPU, IVA */
+static struct clkdm_dep dss_sleepdeps[] = {
+	{ .clkdm_name = "mpu_clkdm" },
+	{ .clkdm_name = "iva2_clkdm" },
+	{ NULL },
+};
+
+/* 3430: CM_SLEEPDEP_PER: MPU, IVA */
+static struct clkdm_dep per_sleepdeps[] = {
+	{ .clkdm_name = "mpu_clkdm" },
+	{ .clkdm_name = "iva2_clkdm" },
+	{ NULL },
+};
+
+/* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */
+static struct clkdm_dep usbhost_sleepdeps[] = {
+	{ .clkdm_name = "mpu_clkdm" },
+	{ .clkdm_name = "iva2_clkdm" },
+	{ NULL },
+};
+
+/* 3430: CM_SLEEPDEP_CAM: MPU */
+static struct clkdm_dep cam_sleepdeps[] = {
+	{ .clkdm_name = "mpu_clkdm" },
+	{ NULL },
+};
+
+/*
+ * 3430ES1: CM_SLEEPDEP_GFX: MPU
+ * 3430ES2: CM_SLEEPDEP_SGX: MPU
+ * These can share data since they will never be present simultaneously
+ * on the same device.
+ */
+static struct clkdm_dep gfx_sgx_sleepdeps[] = {
+	{ .clkdm_name = "mpu_clkdm" },
+	{ NULL },
+};
+
+/*
+ * OMAP3 clockdomains
+ */
+
+static struct clockdomain mpu_3xxx_clkdm = {
+	.name		= "mpu_clkdm",
+	.pwrdm		= { .name = "mpu_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
+	.dep_bit	= OMAP3430_EN_MPU_SHIFT,
+	.wkdep_srcs	= mpu_3xxx_wkdeps,
+	.clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
+};
+
+static struct clockdomain neon_clkdm = {
+	.name		= "neon_clkdm",
+	.pwrdm		= { .name = "neon_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.wkdep_srcs	= neon_wkdeps,
+	.clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
+};
+
+static struct clockdomain iva2_clkdm = {
+	.name		= "iva2_clkdm",
+	.pwrdm		= { .name = "iva2_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.dep_bit	= OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
+	.wkdep_srcs	= iva2_wkdeps,
+	.clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
+};
+
+static struct clockdomain gfx_3430es1_clkdm = {
+	.name		= "gfx_clkdm",
+	.pwrdm		= { .name = "gfx_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.wkdep_srcs	= gfx_sgx_3xxx_wkdeps,
+	.sleepdep_srcs	= gfx_sgx_sleepdeps,
+	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
+};
+
+static struct clockdomain sgx_clkdm = {
+	.name		= "sgx_clkdm",
+	.pwrdm		= { .name = "sgx_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.wkdep_srcs	= gfx_sgx_3xxx_wkdeps,
+	.sleepdep_srcs	= gfx_sgx_sleepdeps,
+	.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
+};
+
+/*
+ * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but
+ * then that information was removed from the 34xx ES2+ TRM.  It is
+ * unclear whether the core is still there, but the clockdomain logic
+ * is there, and must be programmed to an appropriate state if the
+ * CORE clockdomain is to become inactive.
+ */
+static struct clockdomain d2d_clkdm = {
+	.name		= "d2d_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l3_3xxx_clkdm = {
+	.name		= "core_l3_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.dep_bit	= OMAP3430_EN_CORE_SHIFT,
+	.clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l4_3xxx_clkdm = {
+	.name		= "core_l4_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.dep_bit	= OMAP3430_EN_CORE_SHIFT,
+	.clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
+};
+
+/* Another case of bit name collisions between several registers: EN_DSS */
+static struct clockdomain dss_3xxx_clkdm = {
+	.name		= "dss_clkdm",
+	.pwrdm		= { .name = "dss_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.dep_bit	= OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
+	.wkdep_srcs	= dss_wkdeps,
+	.sleepdep_srcs	= dss_sleepdeps,
+	.clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
+};
+
+static struct clockdomain cam_clkdm = {
+	.name		= "cam_clkdm",
+	.pwrdm		= { .name = "cam_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.wkdep_srcs	= cam_wkdeps,
+	.sleepdep_srcs	= cam_sleepdeps,
+	.clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
+};
+
+static struct clockdomain usbhost_clkdm = {
+	.name		= "usbhost_clkdm",
+	.pwrdm		= { .name = "usbhost_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.wkdep_srcs	= usbhost_wkdeps,
+	.sleepdep_srcs	= usbhost_sleepdeps,
+	.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
+};
+
+static struct clockdomain per_clkdm = {
+	.name		= "per_clkdm",
+	.pwrdm		= { .name = "per_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.dep_bit	= OMAP3430_EN_PER_SHIFT,
+	.wkdep_srcs	= per_wkdeps,
+	.sleepdep_srcs	= per_sleepdeps,
+	.clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
+};
+
+/*
+ * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
+ * switched of even if sdti is in use
+ */
+static struct clockdomain emu_clkdm = {
+	.name		= "emu_clkdm",
+	.pwrdm		= { .name = "emu_pwrdm" },
+	.flags		= /* CLKDM_CAN_ENABLE_AUTO |  */CLKDM_CAN_SWSUP,
+	.clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
+};
+
+static struct clockdomain dpll1_clkdm = {
+	.name		= "dpll1_clkdm",
+	.pwrdm		= { .name = "dpll1_pwrdm" },
+};
+
+static struct clockdomain dpll2_clkdm = {
+	.name		= "dpll2_clkdm",
+	.pwrdm		= { .name = "dpll2_pwrdm" },
+};
+
+static struct clockdomain dpll3_clkdm = {
+	.name		= "dpll3_clkdm",
+	.pwrdm		= { .name = "dpll3_pwrdm" },
+};
+
+static struct clockdomain dpll4_clkdm = {
+	.name		= "dpll4_clkdm",
+	.pwrdm		= { .name = "dpll4_pwrdm" },
+};
+
+static struct clockdomain dpll5_clkdm = {
+	.name		= "dpll5_clkdm",
+	.pwrdm		= { .name = "dpll5_pwrdm" },
+};
+
+/*
+ * Clockdomain hwsup dependencies
+ */
+
+static struct clkdm_autodep clkdm_autodeps[] = {
+	{
+		.clkdm = { .name = "mpu_clkdm" },
+	},
+	{
+		.clkdm = { .name = "iva2_clkdm" },
+	},
+	{
+		.clkdm = { .name = NULL },
+	}
+};
+
+/*
+ *
+ */
+
+static struct clockdomain *clockdomains_omap3430_common[] __initdata = {
+	&wkup_common_clkdm,
+	&cm_common_clkdm,
+	&prm_common_clkdm,
+	&mpu_3xxx_clkdm,
+	&neon_clkdm,
+	&iva2_clkdm,
+	&d2d_clkdm,
+	&core_l3_3xxx_clkdm,
+	&core_l4_3xxx_clkdm,
+	&dss_3xxx_clkdm,
+	&cam_clkdm,
+	&per_clkdm,
+	&emu_clkdm,
+	&dpll1_clkdm,
+	&dpll2_clkdm,
+	&dpll3_clkdm,
+	&dpll4_clkdm,
+	NULL
+};
+
+static struct clockdomain *clockdomains_omap3430es1[] __initdata = {
+	&gfx_3430es1_clkdm,
+	NULL,
+};
+
+static struct clockdomain *clockdomains_omap3430es2plus[] __initdata = {
+	&sgx_clkdm,
+	&dpll5_clkdm,
+	&usbhost_clkdm,
+	NULL,
+};
+
+void __init omap3xxx_clockdomains_init(void)
+{
+	struct clockdomain **sc;
+
+	if (!cpu_is_omap34xx())
+		return;
+
+	clkdm_register_platform_funcs(&omap3_clkdm_operations);
+	clkdm_register_clkdms(clockdomains_omap3430_common);
+
+	sc = (omap_rev() == OMAP3430_REV_ES1_0) ? clockdomains_omap3430es1 :
+		clockdomains_omap3430es2plus;
+
+	clkdm_register_clkdms(sc);
+
+	clkdm_register_autodeps(clkdm_autodeps);
+	clkdm_complete_init();
+}

arch/arm/mach-omap2/common.c

@@ -45,17 +45,22 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
 static struct omap_globals omap242x_globals = {
 	.class	= OMAP242X_CLASS,
 	.tap	= OMAP2_L4_IO_ADDRESS(0x48014000),
-	.sdrc	= OMAP2420_SDRC_BASE,
-	.sms	= OMAP2420_SMS_BASE,
-	.ctrl	= OMAP242X_CTRL_BASE,
-	.prm	= OMAP2420_PRM_BASE,
-	.cm	= OMAP2420_CM_BASE,
+	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
+	.sms	= OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
 };
 
 void __init omap2_set_globals_242x(void)
 {
 	__omap2_set_globals(&omap242x_globals);
 }
+
+void __init omap242x_map_io(void)
+{
+	omap242x_map_common_io();
+}
 #endif
 
 #if defined(CONFIG_SOC_OMAP2430)
@@ -63,17 +68,22 @@ void __init omap2_set_globals_242x(void)
 static struct omap_globals omap243x_globals = {
 	.class	= OMAP243X_CLASS,
 	.tap	= OMAP2_L4_IO_ADDRESS(0x4900a000),
-	.sdrc	= OMAP243X_SDRC_BASE,
-	.sms	= OMAP243X_SMS_BASE,
-	.ctrl	= OMAP243X_CTRL_BASE,
-	.prm	= OMAP2430_PRM_BASE,
-	.cm	= OMAP2430_CM_BASE,
+	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
+	.sms	= OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
 };
 
 void __init omap2_set_globals_243x(void)
 {
 	__omap2_set_globals(&omap243x_globals);
 }
+
+void __init omap243x_map_io(void)
+{
+	omap243x_map_common_io();
+}
 #endif
 
 #if defined(CONFIG_ARCH_OMAP3)
@@ -81,11 +91,11 @@ void __init omap2_set_globals_243x(void)
 static struct omap_globals omap3_globals = {
 	.class	= OMAP343X_CLASS,
 	.tap	= OMAP2_L4_IO_ADDRESS(0x4830A000),
-	.sdrc	= OMAP343X_SDRC_BASE,
-	.sms	= OMAP343X_SMS_BASE,
-	.ctrl	= OMAP343X_CTRL_BASE,
-	.prm	= OMAP3430_PRM_BASE,
-	.cm	= OMAP3430_CM_BASE,
+	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
+	.sms	= OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
 };
 
 void __init omap2_set_globals_3xxx(void)
@@ -95,7 +105,6 @@ void __init omap2_set_globals_3xxx(void)
 
 void __init omap3_map_io(void)
 {
-	omap2_set_globals_3xxx();
 	omap34xx_map_common_io();
 }
 
@@ -110,9 +119,9 @@ void __init omap3_map_io(void)
 static struct omap_globals ti816x_globals = {
 	.class  = OMAP343X_CLASS,
 	.tap    = OMAP2_L4_IO_ADDRESS(TI816X_TAP_BASE),
-	.ctrl   = TI816X_CTRL_BASE,
-	.prm    = TI816X_PRCM_BASE,
-	.cm     = TI816X_PRCM_BASE,
+	.ctrl   = OMAP2_L4_IO_ADDRESS(TI816X_CTRL_BASE),
+	.prm    = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE),
+	.cm     = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE),
 };
 
 void __init omap2_set_globals_ti816x(void)
@@ -125,11 +134,11 @@ void __init omap2_set_globals_ti816x(void)
 static struct omap_globals omap4_globals = {
 	.class	= OMAP443X_CLASS,
 	.tap	= OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
-	.ctrl	= OMAP443X_SCM_BASE,
-	.ctrl_pad	= OMAP443X_CTRL_BASE,
-	.prm	= OMAP4430_PRM_BASE,
-	.cm	= OMAP4430_CM_BASE,
-	.cm2	= OMAP4430_CM2_BASE,
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
+	.ctrl_pad	= OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
+	.cm2	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
 };
 
 void __init omap2_set_globals_443x(void)
@@ -138,5 +147,10 @@ void __init omap2_set_globals_443x(void)
 	omap2_set_globals_control(&omap4_globals);
 	omap2_set_globals_prcm(&omap4_globals);
 }
+
+void __init omap4_map_io(void)
+{
+	omap44xx_map_common_io();
+}
 #endif
 

arch/arm/mach-omap2/control.c

@@ -149,17 +149,11 @@ static struct omap3_control_regs control_context;
 
 void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
 {
-	/* Static mapping, never released */
-	if (omap2_globals->ctrl) {
-		omap2_ctrl_base = ioremap(omap2_globals->ctrl, SZ_4K);
-		WARN_ON(!omap2_ctrl_base);
-	}
+	if (omap2_globals->ctrl)
+		omap2_ctrl_base = omap2_globals->ctrl;
 
-	/* Static mapping, never released */
-	if (omap2_globals->ctrl_pad) {
-		omap4_ctrl_pad_base = ioremap(omap2_globals->ctrl_pad, SZ_4K);
-		WARN_ON(!omap4_ctrl_pad_base);
-	}
+	if (omap2_globals->ctrl_pad)
+		omap4_ctrl_pad_base = omap2_globals->ctrl_pad;
 }
 
 void __iomem *omap_ctrl_base_get(void)

arch/arm/mach-omap2/display.c

@@ -35,14 +35,6 @@ static struct platform_device omap_display_device = {
 	},
 };
 
-static struct omap_device_pm_latency omap_dss_latency[] = {
-	[0] = {
-		.deactivate_func        = omap_device_idle_hwmods,
-		.activate_func          = omap_device_enable_hwmods,
-		.flags			= OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 struct omap_dss_hwmod_data {
 	const char *oh_name;
 	const char *dev_name;
@@ -78,7 +70,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 {
 	int r = 0;
 	struct omap_hwmod *oh;
-	struct omap_device *od;
+	struct platform_device *pdev;
 	int i, oh_count;
 	struct omap_display_platform_data pdata;
 	const struct omap_dss_hwmod_data *curr_dss_hwmod;
@@ -108,13 +100,12 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 			return -ENODEV;
 		}
 
-		od = omap_device_build(curr_dss_hwmod[i].dev_name,
+		pdev = omap_device_build(curr_dss_hwmod[i].dev_name,
 				curr_dss_hwmod[i].id, oh, &pdata,
 				sizeof(struct omap_display_platform_data),
-				omap_dss_latency,
-				ARRAY_SIZE(omap_dss_latency), 0);
+				NULL, 0, 0);
 
-		if (WARN((IS_ERR(od)), "Could not build omap_device for %s\n",
+		if (WARN((IS_ERR(pdev)), "Could not build omap_device for %s\n",
 				curr_dss_hwmod[i].oh_name))
 			return -ENODEV;
 	}

arch/arm/mach-omap2/io.h

-
-#ifndef __MACH_OMAP2_IO_H__
-#define __MACH_OMAP2_IO_H__
-
-extern int __init omap_sram_init(void);
-
-#endif /*  __MACH_OMAP2_IO_H__ */

arch/arm/mach-omap2/irq.c

@@ -165,8 +165,8 @@ static void __init omap_init_irq(u32 base, int nr_irqs)
 
 		omap_irq_bank_init_one(bank);
 
-		for (i = 0, j = 0; i < bank->nr_irqs; i += 32, j += 0x20)
-			omap_alloc_gc(bank->base_reg + j, i, 32);
+		for (j = 0; j < bank->nr_irqs; j += 32)
+			omap_alloc_gc(bank->base_reg + j, j, 32);
 
 		nr_of_irqs += bank->nr_irqs;
 		nr_banks++;

arch/arm/mach-omap2/omap_hwmod.c

@@ -1954,9 +1954,6 @@ int __init omap_hwmod_register(struct omap_hwmod **ohs)
 
 	i = 0;
 	do {
-		if (!omap_chip_is(ohs[i]->omap_chip))
-			continue;
-
 		r = _register(ohs[i]);
 		WARN(r, "omap_hwmod: %s: _register returned %d\n", ohs[i]->name,
 		     r);