Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 4 年多

通知 15
Star 8
Fork 2
K
kernel_linux
提交 bca0d7d9 编写于 作者: M Maxime Ripard
浏览文件
操作

ARM: dts: sun4i: Provide default muxing for relevant controllers 

The I2C's, MMC0 and EMAC controllers have only one muxing option in the
SoC. In such a case, we can just move the muxing into the DTSI, and remove
it from the DTS.
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
上级 e53bd761
隐藏空白更改
内联 并排
Showing with 12 addition and 126 deletion
arch/arm/boot/dts/sun4i-a10-a1000.dts
浏览文件 @ bca0d7d9
...@@ -125,8 +125,6 @@ ...@@ -125,8 +125,6 @@
}; };
&emac { &emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins>;
phy = <&phy1>; phy = <&phy1>;
status = "okay"; status = "okay";
}; };
...@@ -136,8 +134,6 @@ ...@@ -136,8 +134,6 @@
}; };
&i2c0 { &i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay"; status = "okay";
axp209: pmic@34 { axp209: pmic@34 {
...@@ -166,8 +162,6 @@ ...@@ -166,8 +162,6 @@
}; };
&mmc0 { &mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
......
arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
浏览文件 @ bca0d7d9
...@@ -68,8 +68,6 @@ ...@@ -68,8 +68,6 @@
}; };
&emac { &emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins>;
phy = <&phy1>; phy = <&phy1>;
status = "okay"; status = "okay";
}; };
...@@ -79,8 +77,6 @@ ...@@ -79,8 +77,6 @@
}; };
&i2c0 { &i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay"; status = "okay";
axp209: pmic@34 { axp209: pmic@34 {
...@@ -108,8 +104,6 @@ ...@@ -108,8 +104,6 @@
}; };
&mmc0 { &mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
......
arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
浏览文件 @ bca0d7d9
...@@ -65,8 +65,6 @@ ...@@ -65,8 +65,6 @@
}; };
&i2c0 { &i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay"; status = "okay";
axp209: pmic@34 { axp209: pmic@34 {
...@@ -80,14 +78,10 @@ ...@@ -80,14 +78,10 @@
}; };
&i2c1 { &i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay"; status = "okay";
}; };
&i2c2 { &i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "okay"; status = "okay";
ft5306de4: touchscreen@38 { ft5306de4: touchscreen@38 {
...@@ -127,8 +121,6 @@ ...@@ -127,8 +121,6 @@
}; };
&mmc0 { &mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
......
arch/arm/boot/dts/sun4i-a10-cubieboard.dts
浏览文件 @ bca0d7d9
...@@ -99,8 +99,6 @@ ...@@ -99,8 +99,6 @@
}; };
&emac { &emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins>;
phy = <&phy1>; phy = <&phy1>;
status = "okay"; status = "okay";
}; };
...@@ -110,8 +108,6 @@ ...@@ -110,8 +108,6 @@
}; };
&i2c0 { &i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay"; status = "okay";
axp209: pmic@34 { axp209: pmic@34 {
...@@ -121,8 +117,6 @@ ...@@ -121,8 +117,6 @@
}; };
&i2c1 { &i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay"; status = "okay";
}; };
...@@ -141,8 +135,6 @@ ...@@ -141,8 +135,6 @@
}; };
&mmc0 { &mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
......
arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
浏览文件 @ bca0d7d9
...@@ -99,8 +99,6 @@ ...@@ -99,8 +99,6 @@
}; };
&i2c0 { &i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay"; status = "okay";
axp209: pmic@34 { axp209: pmic@34 {
...@@ -112,15 +110,11 @@ ...@@ -112,15 +110,11 @@
#include "axp209.dtsi" #include "axp209.dtsi"
&i2c1 { &i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
/* pull-ups and devices require AXP209 LDO3 */ /* pull-ups and devices require AXP209 LDO3 */
status = "failed"; status = "failed";
}; };
&i2c2 { &i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "okay"; status = "okay";
ft5406ee8: touchscreen@38 { ft5406ee8: touchscreen@38 {
...@@ -154,8 +148,6 @@ ...@@ -154,8 +148,6 @@
}; };
&mmc0 { &mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
......
arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
浏览文件 @ bca0d7d9
...@@ -89,8 +89,6 @@ ...@@ -89,8 +89,6 @@
}; };
&i2c0 { &i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay"; status = "okay";
axp209: pmic@34 { axp209: pmic@34 {
...@@ -102,8 +100,6 @@ ...@@ -102,8 +100,6 @@
#include "axp209.dtsi" #include "axp209.dtsi"
&i2c1 { &i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay"; status = "okay";
/* Accelerometer */ /* Accelerometer */
...@@ -143,8 +139,6 @@ ...@@ -143,8 +139,6 @@
}; };
&mmc0 { &mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */
......
arch/arm/boot/dts/sun4i-a10-hackberry.dts
浏览文件 @ bca0d7d9
...@@ -80,8 +80,6 @@ ...@@ -80,8 +80,6 @@
}; };
&emac { &emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins>;
phy = <&phy0>; phy = <&phy0>;
status = "okay"; status = "okay";
}; };
...@@ -106,8 +104,6 @@ ...@@ -106,8 +104,6 @@
}; };
&mmc0 { &mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
......
arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
浏览文件 @ bca0d7d9
...@@ -63,8 +63,6 @@ ...@@ -63,8 +63,6 @@
}; };
&i2c0 { &i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay"; status = "okay";
axp209: pmic@34 { axp209: pmic@34 {
...@@ -78,8 +76,6 @@ ...@@ -78,8 +76,6 @@
}; };
&mmc0 { &mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
......
arch/arm/boot/dts/sun4i-a10-inet1.dts
浏览文件 @ bca0d7d9
...@@ -86,8 +86,6 @@ ...@@ -86,8 +86,6 @@
}; };
&i2c0 { &i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay"; status = "okay";
axp209: pmic@34 { axp209: pmic@34 {
...@@ -99,8 +97,6 @@ ...@@ -99,8 +97,6 @@
#include "axp209.dtsi" #include "axp209.dtsi"
&i2c1 { &i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay"; status = "okay";
/* Accelerometer */ /* Accelerometer */
...@@ -113,8 +109,6 @@ ...@@ -113,8 +109,6 @@
}; };
&i2c2 { &i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "okay"; status = "okay";
ft5x: touchscreen@38 { ft5x: touchscreen@38 {
...@@ -156,8 +150,6 @@ ...@@ -156,8 +150,6 @@
}; };
&mmc0 { &mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
......
arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
浏览文件 @ bca0d7d9
...@@ -72,8 +72,6 @@ ...@@ -72,8 +72,6 @@
}; };
&i2c0 { &i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay"; status = "okay";
axp209: pmic@34 { axp209: pmic@34 {
...@@ -85,14 +83,10 @@ ...@@ -85,14 +83,10 @@
#include "axp209.dtsi" #include "axp209.dtsi"
&i2c1 { &i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay"; status = "okay";
}; };
&i2c2 { &i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "okay"; status = "okay";
ft5406ee8: touchscreen@38 { ft5406ee8: touchscreen@38 {
...@@ -146,8 +140,6 @@ ...@@ -146,8 +140,6 @@
}; };
&mmc0 { &mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
......
arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
浏览文件 @ bca0d7d9
...@@ -222,8 +222,6 @@ ...@@ -222,8 +222,6 @@
}; };
&i2c0 { &i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay"; status = "okay";
axp209: pmic@34 { axp209: pmic@34 {
...@@ -235,8 +233,6 @@ ...@@ -235,8 +233,6 @@
#include "axp209.dtsi" #include "axp209.dtsi"
&i2c1 { &i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay"; status = "okay";
/* Accelerometer */ /* Accelerometer */
...@@ -249,8 +245,6 @@ ...@@ -249,8 +245,6 @@
}; };
&i2c2 { &i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "okay"; status = "okay";
ft5406ee8: touchscreen@38 { ft5406ee8: touchscreen@38 {
...@@ -304,8 +298,6 @@ ...@@ -304,8 +298,6 @@
}; };
&mmc0 { &mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
......
arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
浏览文件 @ bca0d7d9
...@@ -94,8 +94,6 @@ ...@@ -94,8 +94,6 @@
}; };
&emac { &emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins>;
phy = <&phy1>; phy = <&phy1>;
status = "okay"; status = "okay";
}; };
...@@ -105,8 +103,6 @@ ...@@ -105,8 +103,6 @@
}; };
&i2c0 { &i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay"; status = "okay";
axp209: pmic@34 { axp209: pmic@34 {
...@@ -135,8 +131,6 @@ ...@@ -135,8 +131,6 @@
}; };
&mmc0 { &mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
......
arch/arm/boot/dts/sun4i-a10-marsboard.dts
浏览文件 @ bca0d7d9
...@@ -105,27 +105,19 @@ ...@@ -105,27 +105,19 @@
}; };
&emac { &emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins>;
phy = <&phy1>; phy = <&phy1>;
status = "okay"; status = "okay";
}; };
&i2c0 { &i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay"; status = "okay";
}; };
&i2c1 { &i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay"; status = "okay";
}; };
&i2c2 { &i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "okay"; status = "okay";
}; };
...@@ -138,8 +130,6 @@ ...@@ -138,8 +130,6 @@
}; };
&mmc0 { &mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
......
arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
浏览文件 @ bca0d7d9
...@@ -70,8 +70,6 @@ ...@@ -70,8 +70,6 @@
}; };
&i2c0 { &i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay"; status = "okay";
axp209: pmic@34 { axp209: pmic@34 {
...@@ -96,8 +94,6 @@ ...@@ -96,8 +94,6 @@
}; };
&mmc0 { &mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
......
arch/arm/boot/dts/sun4i-a10-mk802.dts
浏览文件 @ bca0d7d9
...@@ -71,8 +71,6 @@ ...@@ -71,8 +71,6 @@
}; };
&mmc0 { &mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
......
arch/arm/boot/dts/sun4i-a10-mk802ii.dts
浏览文件 @ bca0d7d9
...@@ -67,8 +67,6 @@ ...@@ -67,8 +67,6 @@
}; };
&i2c0 { &i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay"; status = "okay";
axp209: pmic@34 { axp209: pmic@34 {
...@@ -82,8 +80,6 @@ ...@@ -82,8 +80,6 @@
}; };
&mmc0 { &mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
......
arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
浏览文件 @ bca0d7d9
...@@ -98,8 +98,6 @@ ...@@ -98,8 +98,6 @@
}; };
&emac { &emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins>;
phy = <&phy1>; phy = <&phy1>;
status = "okay"; status = "okay";
}; };
...@@ -109,8 +107,6 @@ ...@@ -109,8 +107,6 @@
}; };
&i2c0 { &i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay"; status = "okay";
axp209: pmic@34 { axp209: pmic@34 {
...@@ -124,8 +120,6 @@ ...@@ -124,8 +120,6 @@
}; };
&i2c1 { &i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay"; status = "okay";
eeprom: eeprom@50 { eeprom: eeprom@50 {
...@@ -144,8 +138,6 @@ ...@@ -144,8 +138,6 @@
}; };
&mmc0 { &mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
......
arch/arm/boot/dts/sun4i-a10-pcduino.dts
浏览文件 @ bca0d7d9
...@@ -112,8 +112,6 @@ ...@@ -112,8 +112,6 @@
}; };
&emac { &emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins>;
phy = <&phy1>; phy = <&phy1>;
status = "okay"; status = "okay";
}; };
...@@ -123,8 +121,6 @@ ...@@ -123,8 +121,6 @@
}; };
&i2c0 { &i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay"; status = "okay";
axp209: pmic@34 { axp209: pmic@34 {
...@@ -142,8 +138,6 @@ ...@@ -142,8 +138,6 @@
}; };
&mmc0 { &mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
......
arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
浏览文件 @ bca0d7d9
...@@ -83,8 +83,6 @@ ...@@ -83,8 +83,6 @@
}; };
&i2c0 { &i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay"; status = "okay";
axp209: pmic@34 { axp209: pmic@34 {
...@@ -96,15 +94,11 @@ ...@@ -96,15 +94,11 @@
#include "axp209.dtsi" #include "axp209.dtsi"
&i2c1 { &i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
/* pull-ups and devices require AXP209 LDO3 */ /* pull-ups and devices require AXP209 LDO3 */
status = "failed"; status = "failed";
}; };
&i2c2 { &i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "okay"; status = "okay";
pixcir_ts@5c { pixcir_ts@5c {
...@@ -142,8 +136,6 @@ ...@@ -142,8 +136,6 @@
}; };
&mmc0 { &mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
......
arch/arm/boot/dts/sun4i-a10.dtsi
浏览文件 @ bca0d7d9
...@@ -266,6 +266,8 @@ ...@@ -266,6 +266,8 @@
dmas = <&dma SUN4I_DMA_DEDICATED 9>, dmas = <&dma SUN4I_DMA_DEDICATED 9>,
<&dma SUN4I_DMA_DEDICATED 8>; <&dma SUN4I_DMA_DEDICATED 8>;
dma-names = "rx", "tx"; dma-names = "rx", "tx";
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins>, <&spi1_cs0_pin>;
status = "disabled"; status = "disabled";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
...@@ -277,6 +279,8 @@ ...@@ -277,6 +279,8 @@
interrupts = <55>; interrupts = <55>;
clocks = <&ccu CLK_AHB_EMAC>; clocks = <&ccu CLK_AHB_EMAC>;
allwinner,sram = <&emac_sram 1>; allwinner,sram = <&emac_sram 1>;
pinctrl-names = "default";
pinctrl-0 = <&emac_pins>;
status = "disabled"; status = "disabled";
}; };
...@@ -294,6 +298,8 @@ ...@@ -294,6 +298,8 @@
clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>; clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
clock-names = "ahb", "mmc"; clock-names = "ahb", "mmc";
interrupts = <32>; interrupts = <32>;
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
status = "disabled"; status = "disabled";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
...@@ -812,6 +818,8 @@ ...@@ -812,6 +818,8 @@
reg = <0x01c2ac00 0x400>; reg = <0x01c2ac00 0x400>;
interrupts = <7>; interrupts = <7>;
clocks = <&ccu CLK_APB1_I2C0>; clocks = <&ccu CLK_APB1_I2C0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "disabled"; status = "disabled";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
...@@ -822,6 +830,8 @@ ...@@ -822,6 +830,8 @@
reg = <0x01c2b000 0x400>; reg = <0x01c2b000 0x400>;
interrupts = <8>; interrupts = <8>;
clocks = <&ccu CLK_APB1_I2C1>; clocks = <&ccu CLK_APB1_I2C1>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "disabled"; status = "disabled";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
...@@ -832,6 +842,8 @@ ...@@ -832,6 +842,8 @@
reg = <0x01c2b400 0x400>; reg = <0x01c2b400 0x400>;
interrupts = <9>; interrupts = <9>;
clocks = <&ccu CLK_APB1_I2C2>; clocks = <&ccu CLK_APB1_I2C2>;
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "disabled"; status = "disabled";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
arch/arm/boot/dts/sunxi-itead-core-common.dtsi
浏览文件 @ bca0d7d9
...@@ -65,8 +65,6 @@ ...@@ -65,8 +65,6 @@
}; };
&i2c0 { &i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay"; status = "okay";
axp209: pmic@34 { axp209: pmic@34 {
...@@ -75,8 +73,6 @@ ...@@ -75,8 +73,6 @@
}; };
&i2c1 { &i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay"; status = "okay";
}; };
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或