Merge branch 'pci/host-designware' into next

* pci/host-designware:
  PCI: designware: Remove open-coded bitmap operations
  PCI: designware: Setup and clear exactly one MSI at a time

Conflicts:
	drivers/pci/host/pcie-designware.c

drivers/pci/host/pcie-designware.c

@@ -196,30 +196,6 @@ void dw_pcie_msi_init(struct pcie_port *pp)
 	dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4, 0);
 }
 
-static int find_valid_pos0(struct pcie_port *pp, int msgvec, int pos, int *pos0)
-{
-	int flag = 1;
-
-	do {
-		pos = find_next_zero_bit(pp->msi_irq_in_use,
-				MAX_MSI_IRQS, pos);
-		/*if you have reached to the end then get out from here.*/
-		if (pos == MAX_MSI_IRQS)
-			return -ENOSPC;
-		/*
-		 * Check if this position is at correct offset.nvec is always a
-		 * power of two. pos0 must be nvec bit aligned.
-		 */
-		if (pos % msgvec)
-			pos += msgvec - (pos % msgvec);
-		else
-			flag = 0;
-	} while (flag);
-
-	*pos0 = pos;
-	return 0;
-}
-
 static void dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
 {
 	unsigned int res, bit, val;
@@ -238,13 +214,14 @@ static void clear_irq_range(struct pcie_port *pp, unsigned int irq_base,
 
 	for (i = 0; i < nvec; i++) {
 		irq_set_msi_desc_off(irq_base, i, NULL);
-		clear_bit(pos + i, pp->msi_irq_in_use);
 		/* Disable corresponding interrupt on MSI controller */
 		if (pp->ops->msi_clear_irq)
 			pp->ops->msi_clear_irq(pp, pos + i);
 		else
 			dw_pcie_msi_clear_irq(pp, pos + i);
 	}
+
+	bitmap_release_region(pp->msi_irq_in_use, pos, order_base_2(nvec));
 }
 
 static void dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)
@@ -260,26 +237,13 @@ static void dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)
 
 static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos)
 {
-	int irq, pos0, pos1, i;
+	int irq, pos0, i;
 	struct pcie_port *pp = sys_to_pcie(desc->dev->bus->sysdata);
 
-	pos0 = find_first_zero_bit(pp->msi_irq_in_use,
-			MAX_MSI_IRQS);
-	if (pos0 % no_irqs) {
-		if (find_valid_pos0(pp, no_irqs, pos0, &pos0))
+	pos0 = bitmap_find_free_region(pp->msi_irq_in_use, MAX_MSI_IRQS,
+				       order_base_2(no_irqs));
+	if (pos0 < 0)
 		goto no_valid_irq;
-	}
-	if (no_irqs > 1) {
-		pos1 = find_next_bit(pp->msi_irq_in_use,
-				MAX_MSI_IRQS, pos0);
-		/* there must be nvec number of consecutive free bits */
-		while ((pos1 - pos0) < no_irqs) {
-			if (find_valid_pos0(pp, no_irqs, pos1, &pos0))
-				goto no_valid_irq;
-			pos1 = find_next_bit(pp->msi_irq_in_use,
-					MAX_MSI_IRQS, pos0);
-		}
-	}
 
 	irq = irq_find_mapping(pp->irq_domain, pos0);
 	if (!irq)
@@ -297,7 +261,6 @@ static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos)
 			clear_irq_range(pp, irq, i, pos0);
 			goto no_valid_irq;
 		}
-		set_bit(pos0 + i, pp->msi_irq_in_use);
 		/*Enable corresponding interrupt in MSI interrupt controller */
 		if (pp->ops->msi_set_irq)
 			pp->ops->msi_set_irq(pp, pos0 + i);
@@ -313,53 +276,17 @@ static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos)
 	return -ENOSPC;
 }
 
-static void clear_irq(unsigned int irq)
-{
-	unsigned int pos, nvec;
-	struct msi_desc *msi;
-	struct pcie_port *pp;
-	struct irq_data *data = irq_get_irq_data(irq);
-
-	/* get the port structure */
-	msi = irq_data_get_msi(data);
-	pp = sys_to_pcie(msi->dev->bus->sysdata);
-
-	/* undo what was done in assign_irq */
-	pos = data->hwirq;
-	nvec = 1 << msi->msi_attrib.multiple;
-
-	clear_irq_range(pp, irq, nvec, pos);
-
-	/* all irqs cleared; reset attributes */
-	msi->irq = 0;
-	msi->msi_attrib.multiple = 0;
-}
-
 static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 			struct msi_desc *desc)
 {
-	int irq, pos, msgvec;
-	u16 msg_ctr;
+	int irq, pos;
 	struct msi_msg msg;
 	struct pcie_port *pp = sys_to_pcie(pdev->bus->sysdata);
 
-	pci_read_config_word(pdev, pdev->msi_cap + PCI_MSI_FLAGS, &msg_ctr);
-	msgvec = (msg_ctr & PCI_MSI_FLAGS_QSIZE) >> 4;
-	if (msgvec == 0)
-		msgvec = (msg_ctr & PCI_MSI_FLAGS_QMASK) >> 1;
-	if (msgvec > 5)
-		msgvec = 0;
-
-	irq = assign_irq((1 << msgvec), desc, &pos);
+	irq = assign_irq(1, desc, &pos);
 	if (irq < 0)
 		return irq;
 
-	/*
-	 * write_msi_msg() will update PCI_MSI_FLAGS so there is
-	 * no need to explicitly call pci_write_config_word().
-	 */
-	desc->msi_attrib.multiple = msgvec;
-
 	if (pp->ops->get_msi_addr)
 		msg.address_lo = pp->ops->get_msi_addr(pp);
 	else
@@ -378,7 +305,11 @@ static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 
 static void dw_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
 {
-	clear_irq(irq);
+	struct irq_data *data = irq_get_irq_data(irq);
+	struct msi_desc *msi = irq_data_get_msi(data);
+	struct pcie_port *pp = sys_to_pcie(msi->dev->bus->sysdata);
+
+	clear_irq_range(pp, irq, 1, data->hwirq);
 }
 
 static struct msi_chip dw_pcie_msi_chip = {