Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 4 年多

通知 15
Star 8
Fork 2
K
kernel_linux
提交 b92f787d 编写于 作者: L Laxman Dewangan 提交者： Mark Brown
浏览文件
操作

regulator: tps80031: add prefix TPS80031 on common defines. 

Pefix "TPS80031" is added on all defines of tps80031 header
to avoid conflict with other header definitions.
Update the regualtor driver of tps80031 to use the same name.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 1a0bb679
显示空白变更内容
内联 并排
Showing with 42 addition and 38 deletion
drivers/regulator/tps80031-regulator.c
浏览文件 @ b92f787d
...@@ -105,16 +105,17 @@ static int tps80031_reg_is_enabled(struct regulator_dev *rdev) ...@@ -105,16 +105,17 @@ static int tps80031_reg_is_enabled(struct regulator_dev *rdev)
u8 reg_val; u8 reg_val;
int ret; int ret;
if (ri->ext_ctrl_flag & EXT_PWR_REQ) if (ri->ext_ctrl_flag & TPS80031_EXT_PWR_REQ)
return true; return true;
ret = tps80031_read(parent, SLAVE_ID1, ri->rinfo->state_reg, &reg_val); ret = tps80031_read(parent, TPS80031_SLAVE_ID1, ri->rinfo->state_reg,
&reg_val);
if (ret < 0) { if (ret < 0) {
dev_err(&rdev->dev, "Reg 0x%02x read failed, err = %d\n", dev_err(&rdev->dev, "Reg 0x%02x read failed, err = %d\n",
ri->rinfo->state_reg, ret); ri->rinfo->state_reg, ret);
return ret; return ret;
} }
return ((reg_val & STATE_MASK) == STATE_ON); return ((reg_val & TPS80031_STATE_MASK) == TPS80031_STATE_ON);
} }
static int tps80031_reg_enable(struct regulator_dev *rdev) static int tps80031_reg_enable(struct regulator_dev *rdev)
...@@ -123,11 +124,11 @@ static int tps80031_reg_enable(struct regulator_dev *rdev) ...@@ -123,11 +124,11 @@ static int tps80031_reg_enable(struct regulator_dev *rdev)
struct device *parent = to_tps80031_dev(rdev); struct device *parent = to_tps80031_dev(rdev);
int ret; int ret;
if (ri->ext_ctrl_flag & EXT_PWR_REQ) if (ri->ext_ctrl_flag & TPS80031_EXT_PWR_REQ)
return 0; return 0;
ret = tps80031_update(parent, SLAVE_ID1, ri->rinfo->state_reg, ret = tps80031_update(parent, TPS80031_SLAVE_ID1, ri->rinfo->state_reg,
STATE_ON, STATE_MASK); TPS80031_STATE_ON, TPS80031_STATE_MASK);
if (ret < 0) { if (ret < 0) {
dev_err(&rdev->dev, "Reg 0x%02x update failed, err = %d\n", dev_err(&rdev->dev, "Reg 0x%02x update failed, err = %d\n",
ri->rinfo->state_reg, ret); ri->rinfo->state_reg, ret);
...@@ -142,11 +143,11 @@ static int tps80031_reg_disable(struct regulator_dev *rdev) ...@@ -142,11 +143,11 @@ static int tps80031_reg_disable(struct regulator_dev *rdev)
struct device *parent = to_tps80031_dev(rdev); struct device *parent = to_tps80031_dev(rdev);
int ret; int ret;
if (ri->ext_ctrl_flag & EXT_PWR_REQ) if (ri->ext_ctrl_flag & TPS80031_EXT_PWR_REQ)
return 0; return 0;
ret = tps80031_update(parent, SLAVE_ID1, ri->rinfo->state_reg, ret = tps80031_update(parent, TPS80031_SLAVE_ID1, ri->rinfo->state_reg,
STATE_OFF, STATE_MASK); TPS80031_STATE_OFF, TPS80031_STATE_MASK);
if (ret < 0) if (ret < 0)
dev_err(&rdev->dev, "Reg 0x%02x update failed, err = %d\n", dev_err(&rdev->dev, "Reg 0x%02x update failed, err = %d\n",
ri->rinfo->state_reg, ret); ri->rinfo->state_reg, ret);
...@@ -299,14 +300,14 @@ static int tps80031_vbus_is_enabled(struct regulator_dev *rdev) ...@@ -299,14 +300,14 @@ static int tps80031_vbus_is_enabled(struct regulator_dev *rdev)
uint8_t ctrl1 = 0; uint8_t ctrl1 = 0;
uint8_t ctrl3 = 0; uint8_t ctrl3 = 0;
ret = tps80031_read(parent, SLAVE_ID2, ret = tps80031_read(parent, TPS80031_SLAVE_ID2,
TPS80031_CHARGERUSB_CTRL1, &ctrl1); TPS80031_CHARGERUSB_CTRL1, &ctrl1);
if (ret < 0) { if (ret < 0) {
dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
TPS80031_CHARGERUSB_CTRL1, ret); TPS80031_CHARGERUSB_CTRL1, ret);
return ret; return ret;
} }
ret = tps80031_read(parent, SLAVE_ID2, ret = tps80031_read(parent, TPS80031_SLAVE_ID2,
TPS80031_CHARGERUSB_CTRL3, &ctrl3); TPS80031_CHARGERUSB_CTRL3, &ctrl3);
if (ret < 0) { if (ret < 0) {
dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
...@@ -324,7 +325,7 @@ static int tps80031_vbus_enable(struct regulator_dev *rdev) ...@@ -324,7 +325,7 @@ static int tps80031_vbus_enable(struct regulator_dev *rdev)
struct device *parent = to_tps80031_dev(rdev); struct device *parent = to_tps80031_dev(rdev);
int ret; int ret;
ret = tps80031_set_bits(parent, SLAVE_ID2, ret = tps80031_set_bits(parent, TPS80031_SLAVE_ID2,
TPS80031_CHARGERUSB_CTRL1, OPA_MODE_EN); TPS80031_CHARGERUSB_CTRL1, OPA_MODE_EN);
if (ret < 0) { if (ret < 0) {
dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
...@@ -332,7 +333,7 @@ static int tps80031_vbus_enable(struct regulator_dev *rdev) ...@@ -332,7 +333,7 @@ static int tps80031_vbus_enable(struct regulator_dev *rdev)
return ret; return ret;
} }
ret = tps80031_set_bits(parent, SLAVE_ID2, ret = tps80031_set_bits(parent, TPS80031_SLAVE_ID2,
TPS80031_CHARGERUSB_CTRL3, BOOST_HW_PWR_EN); TPS80031_CHARGERUSB_CTRL3, BOOST_HW_PWR_EN);
if (ret < 0) { if (ret < 0) {
dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
...@@ -348,8 +349,8 @@ static int tps80031_vbus_disable(struct regulator_dev *rdev) ...@@ -348,8 +349,8 @@ static int tps80031_vbus_disable(struct regulator_dev *rdev)
struct device *parent = to_tps80031_dev(rdev); struct device *parent = to_tps80031_dev(rdev);
int ret = 0; int ret = 0;
if (ri->config_flags & VBUS_DISCHRG_EN_PDN) { if (ri->config_flags & TPS80031_VBUS_DISCHRG_EN_PDN) {
ret = tps80031_write(parent, SLAVE_ID2, ret = tps80031_write(parent, TPS80031_SLAVE_ID2,
USB_VBUS_CTRL_SET, VBUS_DISCHRG); USB_VBUS_CTRL_SET, VBUS_DISCHRG);
if (ret < 0) { if (ret < 0) {
dev_err(ri->dev, "reg 0x%02x write failed, e = %d\n", dev_err(ri->dev, "reg 0x%02x write failed, e = %d\n",
...@@ -358,7 +359,7 @@ static int tps80031_vbus_disable(struct regulator_dev *rdev) ...@@ -358,7 +359,7 @@ static int tps80031_vbus_disable(struct regulator_dev *rdev)
} }
} }
ret = tps80031_clr_bits(parent, SLAVE_ID2, ret = tps80031_clr_bits(parent, TPS80031_SLAVE_ID2,
TPS80031_CHARGERUSB_CTRL1, OPA_MODE_EN); TPS80031_CHARGERUSB_CTRL1, OPA_MODE_EN);
if (ret < 0) { if (ret < 0) {
dev_err(ri->dev, "reg 0x%02x clearbit failed, e = %d\n", dev_err(ri->dev, "reg 0x%02x clearbit failed, e = %d\n",
...@@ -366,7 +367,7 @@ static int tps80031_vbus_disable(struct regulator_dev *rdev) ...@@ -366,7 +367,7 @@ static int tps80031_vbus_disable(struct regulator_dev *rdev)
return ret; return ret;
} }
ret = tps80031_clr_bits(parent, SLAVE_ID2, ret = tps80031_clr_bits(parent, TPS80031_SLAVE_ID2,
TPS80031_CHARGERUSB_CTRL3, BOOST_HW_PWR_EN); TPS80031_CHARGERUSB_CTRL3, BOOST_HW_PWR_EN);
if (ret < 0) { if (ret < 0) {
dev_err(ri->dev, "reg 0x%02x clearbit failed, e = %d\n", dev_err(ri->dev, "reg 0x%02x clearbit failed, e = %d\n",
...@@ -375,8 +376,8 @@ static int tps80031_vbus_disable(struct regulator_dev *rdev) ...@@ -375,8 +376,8 @@ static int tps80031_vbus_disable(struct regulator_dev *rdev)
} }
mdelay(DIV_ROUND_UP(ri->rinfo->desc.enable_time, 1000)); mdelay(DIV_ROUND_UP(ri->rinfo->desc.enable_time, 1000));
if (ri->config_flags & VBUS_DISCHRG_EN_PDN) { if (ri->config_flags & TPS80031_VBUS_DISCHRG_EN_PDN) {
ret = tps80031_write(parent, SLAVE_ID2, ret = tps80031_write(parent, TPS80031_SLAVE_ID2,
USB_VBUS_CTRL_CLR, VBUS_DISCHRG); USB_VBUS_CTRL_CLR, VBUS_DISCHRG);
if (ret < 0) { if (ret < 0) {
dev_err(ri->dev, "reg 0x%02x write failed, e = %d\n", dev_err(ri->dev, "reg 0x%02x write failed, e = %d\n",
...@@ -433,7 +434,7 @@ static struct regulator_ops tps80031_ext_reg_ops = { ...@@ -433,7 +434,7 @@ static struct regulator_ops tps80031_ext_reg_ops = {
.state_reg = TPS80031_##_id##_CFG_STATE, \ .state_reg = TPS80031_##_id##_CFG_STATE, \
.force_reg = TPS80031_##_id##_CFG_FORCE, \ .force_reg = TPS80031_##_id##_CFG_FORCE, \
.volt_reg = TPS80031_##_id##_CFG_VOLTAGE, \ .volt_reg = TPS80031_##_id##_CFG_VOLTAGE, \
.volt_id = SLAVE_##_volt_id, \ .volt_id = TPS80031_SLAVE_##_volt_id, \
.preq_bit = _pbit, \ .preq_bit = _pbit, \
.desc = { \ .desc = { \
.name = "tps80031_"#_id, \ .name = "tps80031_"#_id, \
...@@ -451,7 +452,7 @@ static struct regulator_ops tps80031_ext_reg_ops = { ...@@ -451,7 +452,7 @@ static struct regulator_ops tps80031_ext_reg_ops = {
.trans_reg = TPS80031_##_id##_CFG_TRANS, \ .trans_reg = TPS80031_##_id##_CFG_TRANS, \
.state_reg = TPS80031_##_id##_CFG_STATE, \ .state_reg = TPS80031_##_id##_CFG_STATE, \
.volt_reg = TPS80031_##_id##_CFG_VOLTAGE, \ .volt_reg = TPS80031_##_id##_CFG_VOLTAGE, \
.volt_id = SLAVE_ID1, \ .volt_id = TPS80031_SLAVE_ID1, \
.preq_bit = _preq_bit, \ .preq_bit = _preq_bit, \
.desc = { \ .desc = { \
.owner = THIS_MODULE, \ .owner = THIS_MODULE, \
...@@ -471,7 +472,7 @@ static struct regulator_ops tps80031_ext_reg_ops = { ...@@ -471,7 +472,7 @@ static struct regulator_ops tps80031_ext_reg_ops = {
{ \ { \
.trans_reg = TPS80031_##_id##_CFG_TRANS, \ .trans_reg = TPS80031_##_id##_CFG_TRANS, \
.state_reg = TPS80031_##_id##_CFG_STATE, \ .state_reg = TPS80031_##_id##_CFG_STATE, \
.volt_id = SLAVE_ID1, \ .volt_id = TPS80031_SLAVE_ID1, \
.preq_bit = _pbit, \ .preq_bit = _pbit, \
.desc = { \ .desc = { \
.name = "tps80031_"#_id, \ .name = "tps80031_"#_id, \
...@@ -524,9 +525,10 @@ static int tps80031_power_req_config(struct device *parent, ...@@ -524,9 +525,10 @@ static int tps80031_power_req_config(struct device *parent,
} }
skip_pwr_req_config: skip_pwr_req_config:
if (tps80031_pdata->ext_ctrl_flag & PWR_ON_ON_SLEEP) { if (tps80031_pdata->ext_ctrl_flag & TPS80031_PWR_ON_ON_SLEEP) {
ret = tps80031_update(parent, SLAVE_ID1, ri->rinfo->trans_reg, ret = tps80031_update(parent, TPS80031_SLAVE_ID1,
TRANS_SLEEP_ON, TRANS_SLEEP_MASK); ri->rinfo->trans_reg, TPS80031_TRANS_SLEEP_ON,
TPS80031_TRANS_SLEEP_MASK);
if (ret < 0) { if (ret < 0) {
dev_err(ri->dev, "Reg 0x%02x update failed, e %d\n", dev_err(ri->dev, "Reg 0x%02x update failed, e %d\n",
ri->rinfo->trans_reg, ret); ri->rinfo->trans_reg, ret);
...@@ -544,16 +546,17 @@ static int tps80031_regulator_config(struct device *parent, ...@@ -544,16 +546,17 @@ static int tps80031_regulator_config(struct device *parent,
switch (ri->rinfo->desc.id) { switch (ri->rinfo->desc.id) {
case TPS80031_REGULATOR_LDOUSB: case TPS80031_REGULATOR_LDOUSB:
if (ri->config_flags & if (ri->config_flags & (TPS80031_USBLDO_INPUT_VSYS |
(USBLDO_INPUT_VSYS | USBLDO_INPUT_PMID)) { TPS80031_USBLDO_INPUT_PMID)) {
unsigned val = 0; unsigned val = 0;
if (ri->config_flags & USBLDO_INPUT_VSYS) if (ri->config_flags & TPS80031_USBLDO_INPUT_VSYS)
val = MISC2_LDOUSB_IN_VSYS; val = MISC2_LDOUSB_IN_VSYS;
else else
val = MISC2_LDOUSB_IN_PMID; val = MISC2_LDOUSB_IN_PMID;
ret = tps80031_update(parent, SLAVE_ID1, ret = tps80031_update(parent, TPS80031_SLAVE_ID1,
TPS80031_MISC2, val, MISC2_LDOUSB_IN_MASK); TPS80031_MISC2, val,
MISC2_LDOUSB_IN_MASK);
if (ret < 0) { if (ret < 0) {
dev_err(ri->dev, dev_err(ri->dev,
"LDOUSB config failed, e= %d\n", ret); "LDOUSB config failed, e= %d\n", ret);
...@@ -563,8 +566,8 @@ static int tps80031_regulator_config(struct device *parent, ...@@ -563,8 +566,8 @@ static int tps80031_regulator_config(struct device *parent,
break; break;
case TPS80031_REGULATOR_LDO3: case TPS80031_REGULATOR_LDO3:
if (ri->config_flags & LDO3_OUTPUT_VIB) { if (ri->config_flags & TPS80031_LDO3_OUTPUT_VIB) {
ret = tps80031_update(parent, SLAVE_ID1, ret = tps80031_update(parent, TPS80031_SLAVE_ID1,
TPS80031_MISC2, MISC2_LDO3_SEL_VIB_VAL, TPS80031_MISC2, MISC2_LDO3_SEL_VIB_VAL,
MISC2_LDO3_SEL_VIB_MASK); MISC2_LDO3_SEL_VIB_MASK);
if (ret < 0) { if (ret < 0) {
...@@ -577,7 +580,7 @@ static int tps80031_regulator_config(struct device *parent, ...@@ -577,7 +580,7 @@ static int tps80031_regulator_config(struct device *parent,
case TPS80031_REGULATOR_VBUS: case TPS80031_REGULATOR_VBUS:
/* Provide SW control Ops if VBUS is SW control */ /* Provide SW control Ops if VBUS is SW control */
if (!(ri->config_flags & VBUS_SW_ONLY)) if (!(ri->config_flags & TPS80031_VBUS_SW_ONLY))
ri->rinfo->desc.ops = &tps80031_vbus_sw_ops; ri->rinfo->desc.ops = &tps80031_vbus_sw_ops;
break; break;
default: default:
...@@ -585,9 +588,10 @@ static int tps80031_regulator_config(struct device *parent, ...@@ -585,9 +588,10 @@ static int tps80031_regulator_config(struct device *parent,
} }
/* Configure Active state to ON, SLEEP to OFF and OFF_state to OFF */ /* Configure Active state to ON, SLEEP to OFF and OFF_state to OFF */
ret = tps80031_update(parent, SLAVE_ID1, ri->rinfo->trans_reg, ret = tps80031_update(parent, TPS80031_SLAVE_ID1, ri->rinfo->trans_reg,
TRANS_ACTIVE_ON | TRANS_SLEEP_OFF | TRANS_OFF_OFF, TPS80031_TRANS_ACTIVE_ON | TPS80031_TRANS_SLEEP_OFF |
TRANS_ACTIVE_MASK | TRANS_SLEEP_MASK | TRANS_OFF_MASK); TPS80031_TRANS_OFF_OFF, TPS80031_TRANS_ACTIVE_MASK |
TPS80031_TRANS_SLEEP_MASK | TPS80031_TRANS_OFF_MASK);
if (ret < 0) { if (ret < 0) {
dev_err(ri->dev, "trans reg update failed, e %d\n", ret); dev_err(ri->dev, "trans reg update failed, e %d\n", ret);
return ret; return ret;
...@@ -604,14 +608,14 @@ static int check_smps_mode_mult(struct device *parent, ...@@ -604,14 +608,14 @@ static int check_smps_mode_mult(struct device *parent,
u8 smps_offset; u8 smps_offset;
u8 smps_mult; u8 smps_mult;
ret = tps80031_read(parent, SLAVE_ID1, ret = tps80031_read(parent, TPS80031_SLAVE_ID1,
TPS80031_SMPS_OFFSET, &smps_offset); TPS80031_SMPS_OFFSET, &smps_offset);
if (ret < 0) { if (ret < 0) {
dev_err(parent, "Error in reading smps offset register\n"); dev_err(parent, "Error in reading smps offset register\n");
return ret; return ret;
} }
ret = tps80031_read(parent, SLAVE_ID1, ret = tps80031_read(parent, TPS80031_SLAVE_ID1,
TPS80031_SMPS_MULT, &smps_mult); TPS80031_SMPS_MULT, &smps_mult);
if (ret < 0) { if (ret < 0) {
dev_err(parent, "Error in reading smps mult register\n"); dev_err(parent, "Error in reading smps mult register\n");
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或