From b4f75aea553a2146bbdd159c397a2ac42cbb9902 Mon Sep 17 00:00:00 2001
From: Mengdong Lin <mengdong.lin@intel.com>
Date: Thu, 12 Jun 2014 14:42:25 +0800
Subject: [PATCH] ALSA: hda - verify pin:converter connection on unsol event
for HSW and VLV
This patch will verify the pin's coverter selection for an active stream
when an unsol event reports this pin becomes available again after a display
mode change or hot-plug event.
For Haswell+ and Valleyview: display mode change or hot-plug can change the
transcoder:port connection and make all the involved audio pins share the 1st
converter. So the stream using 1st convertor will flow to multiple pins
but active streams using other converters will fail. This workaround
is to assure the pin selects the right conveter and an assigned converter is
not shared by other unused pins.
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
sound/pci/hda/patch_hdmi.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index be0a9ee0b804..3e4417b0ddbe 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1594,10 +1594,18 @@ static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll)
* Re-setup pin and infoframe. This is needed e.g. when
* - sink is first plugged-in (infoframe is not set up if !monitor_present)
* - transcoder can change during stream playback on Haswell
+ * and this can make HW reset converter selection on a pin.
*/
- if (eld->eld_valid && !old_eld_valid && per_pin->setup)
+ if (eld->eld_valid && !old_eld_valid && per_pin->setup) {
+ if (is_haswell_plus(codec) || is_valleyview(codec)) {
+ intel_verify_pin_cvt_connect(codec, per_pin);
+ intel_not_share_assigned_cvt(codec, pin_nid,
+ per_pin->mux_idx);
+ }
+
hdmi_setup_audio_infoframe(codec, per_pin,
per_pin->non_pcm);
+ }
}
if (eld_changed)
--
GitLab