Merge branch 'devel-stable' into for-linus

Conflicts:
	arch/arm/Kconfig.debug
	arch/arm/plat-versatile/Kconfig
Merge fixes:
	arch/arm/mach-integrator/Kconfig
	drivers/clocksource/Kconfig

arch/arm/Kconfig

@@ -30,7 +30,6 @@ config ARM
 	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
 	select HAVE_C_RECORDMCOUNT
 	select HAVE_GENERIC_HARDIRQS
-	select HAVE_SPARSE_IRQ
 	select GENERIC_IRQ_SHOW
 	select CPU_PM if (SUSPEND || CPU_IDLE)
 	select GENERIC_PCI_IOMAP
@@ -55,9 +54,6 @@ config MIGHT_HAVE_PCI
 config SYS_SUPPORTS_APM_EMULATION
 	bool
 
-config HAVE_SCHED_CLOCK
-	bool
-
 config GENERIC_GPIO
 	bool
 
@@ -355,6 +351,7 @@ config ARCH_HIGHBANK
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
 	select HAVE_SMP
+	select SPARSE_IRQ
 	select USE_OF
 	help
 	  Support for the Calxeda Highbank SoC based boards.
@@ -443,7 +440,6 @@ config ARCH_MXC
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
-	select HAVE_SCHED_CLOCK
 	select MULTI_IRQ_HANDLER
 	help
 	  Support for Freescale MXC/iMX-based family of processors
@@ -535,7 +531,6 @@ config ARCH_IXP4XX
 	select CPU_XSCALE
 	select GENERIC_GPIO
 	select GENERIC_CLOCKEVENTS
-	select HAVE_SCHED_CLOCK
 	select MIGHT_HAVE_PCI
 	select DMABOUNCE if PCI
 	help
@@ -606,7 +601,6 @@ config ARCH_MMP
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
-	select HAVE_SCHED_CLOCK
 	select TICK_ONESHOT
 	select PLAT_PXA
 	select SPARSE_IRQ
@@ -647,7 +641,6 @@ config ARCH_TEGRA
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
 	select HAVE_CLK
-	select HAVE_SCHED_CLOCK
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_HAS_CPUFREQ
@@ -664,7 +657,6 @@ config ARCH_PICOXCELL
 	select DW_APB_TIMER
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
-	select HAVE_SCHED_CLOCK
 	select HAVE_TCM
 	select NO_IOPORT
 	select SPARSE_IRQ
@@ -692,7 +684,6 @@ config ARCH_PXA
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
-	select HAVE_SCHED_CLOCK
 	select TICK_ONESHOT
 	select PLAT_PXA
 	select SPARSE_IRQ
@@ -760,7 +751,6 @@ config ARCH_SA1100
 	select CPU_FREQ
 	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
-	select HAVE_SCHED_CLOCK
 	select TICK_ONESHOT
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_IDE
@@ -817,7 +807,6 @@ config ARCH_S5P64X0
 	select CLKSRC_MMIO
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select GENERIC_CLOCKEVENTS
-	select HAVE_SCHED_CLOCK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC if RTC_CLASS
 	help
@@ -850,7 +839,6 @@ config ARCH_S5PV210
 	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_HAS_CPUFREQ
 	select GENERIC_CLOCKEVENTS
-	select HAVE_SCHED_CLOCK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -893,7 +881,6 @@ config ARCH_U300
 	depends on MMU
 	select CLKSRC_MMIO
 	select CPU_ARM926T
-	select HAVE_SCHED_CLOCK
 	select HAVE_TCM
 	select ARM_AMBA
 	select ARM_PATCH_PHYS_VIRT
@@ -951,7 +938,6 @@ config ARCH_OMAP
 	select ARCH_HAS_CPUFREQ
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
-	select HAVE_SCHED_CLOCK
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  Support for TI's OMAP platform (OMAP1/2/3/4).
@@ -1117,13 +1103,11 @@ config ARCH_ACORN
 config PLAT_IOP
 	bool
 	select GENERIC_CLOCKEVENTS
-	select HAVE_SCHED_CLOCK
 
 config PLAT_ORION
 	bool
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
-	select HAVE_SCHED_CLOCK
 
 config PLAT_PXA
 	bool

arch/arm/Kconfig.debug

@@ -81,41 +81,6 @@ choice
 	prompt "Kernel low-level debugging port"
 	depends on DEBUG_LL
 
-	config DEBUG_LL_UART_NONE
-		bool "No low-level debugging UART"
-		help
-		  Say Y here if your platform doesn't provide a UART option
-		  below. This relies on your platform choosing the right UART
-		  definition internally in order for low-level debugging to
-		  work.
-
-	config DEBUG_ICEDCC
-		bool "Kernel low-level debugging via EmbeddedICE DCC channel"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the EmbeddedICE macrocell's DCC channel using
-		  co-processor 14. This is known to work on the ARM9 style ICE
-		  channel and on the XScale with the PEEDI.
-
-		  Note that the system will appear to hang during boot if there
-		  is nothing connected to read from the DCC.
-
-	config DEBUG_SEMIHOSTING
-		bool "Kernel low-level debug output via semihosting I"
-		help
-		  Semihosting enables code running on an ARM target to use
-		  the I/O facilities on a host debugger/emulator through a
-		  simple SVC calls. The host debugger or emulator must have
-		  semihosting enabled for the special svc call to be trapped
-		  otherwise the kernel will crash.
-
-		  This is known to work with OpenOCD, as wellas
-		  ARM's Fast Models, or any other controlling environment
-		  that implements semihosting.
-
-		  For more details about semihosting, please see
-		  chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
-
 	config AT91_DEBUG_LL_DBGU0
 		bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
 		depends on HAVE_AT91_DBGU0
@@ -124,20 +89,6 @@ choice
 		bool "Kernel low-level debugging on 9263, 9g45 and cap9"
 		depends on HAVE_AT91_DBGU1
 
-	config DEBUG_FOOTBRIDGE_COM1
-		bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
-		depends on FOOTBRIDGE
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the 8250 at PCI COM1.
-
-	config DEBUG_DC21285_PORT
-		bool "Kernel low-level debugging messages via footbridge serial port"
-		depends on FOOTBRIDGE
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port in the DC21285 (Footbridge).
-
 	config DEBUG_CLPS711X_UART1
 		bool "Kernel low-level debugging messages via UART1"
 		depends on ARCH_CLPS711X
@@ -152,6 +103,20 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on these devices.
 
+	config DEBUG_DC21285_PORT
+		bool "Kernel low-level debugging messages via footbridge serial port"
+		depends on FOOTBRIDGE
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port in the DC21285 (Footbridge).
+
+	config DEBUG_FOOTBRIDGE_COM1
+		bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
+		depends on FOOTBRIDGE
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the 8250 at PCI COM1.
+
 	config DEBUG_HIGHBANK_UART
 		bool "Kernel low-level debugging messages via Highbank UART"
 		depends on ARCH_HIGHBANK
@@ -222,6 +187,59 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX6Q.
 
+	config DEBUG_MSM_UART1
+		bool "Kernel low-level debugging messages via MSM UART1"
+		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the first serial port on MSM devices.
+
+	config DEBUG_MSM_UART2
+		bool "Kernel low-level debugging messages via MSM UART2"
+		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the second serial port on MSM devices.
+
+	config DEBUG_MSM_UART3
+		bool "Kernel low-level debugging messages via MSM UART3"
+		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the third serial port on MSM devices.
+
+	config DEBUG_MSM8660_UART
+		bool "Kernel low-level debugging messages via MSM 8660 UART"
+		depends on ARCH_MSM8X60
+		select MSM_HAS_DEBUG_UART_HS
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on MSM 8660 devices.
+
+	config DEBUG_MSM8960_UART
+		bool "Kernel low-level debugging messages via MSM 8960 UART"
+		depends on ARCH_MSM8960
+		select MSM_HAS_DEBUG_UART_HS
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on MSM 8960 devices.
+
+	config DEBUG_REALVIEW_STD_PORT
+		bool "RealView Default UART"
+		depends on ARCH_REALVIEW
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on RealView EB, PB11MP, PBA8
+		  and PBX platforms.
+
+	config DEBUG_REALVIEW_PB1176_PORT
+		bool "RealView PB1176 UART"
+		depends on MACH_REALVIEW_PB1176
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the standard serial port on the RealView
+		  PB1176 platform.
+
 	config DEBUG_S3C_UART0
 		depends on PLAT_SAMSUNG
 		bool "Use S3C UART 0 for low-level debug"
@@ -255,58 +273,40 @@ choice
 		  The uncompressor code port configuration is now handled
 		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
 
-	config DEBUG_REALVIEW_STD_PORT
-		bool "RealView Default UART"
-		depends on ARCH_REALVIEW
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on RealView EB, PB11MP, PBA8
-		  and PBX platforms.
-
-	config DEBUG_REALVIEW_PB1176_PORT
-		bool "RealView PB1176 UART"
-		depends on MACH_REALVIEW_PB1176
+	config DEBUG_LL_UART_NONE
+		bool "No low-level debugging UART"
 		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the standard serial port on the RealView
-		  PB1176 platform.
+		  Say Y here if your platform doesn't provide a UART option
+		  below. This relies on your platform choosing the right UART
+		  definition internally in order for low-level debugging to
+		  work.
 
-	config DEBUG_MSM_UART1
-		bool "Kernel low-level debugging messages via MSM UART1"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+	config DEBUG_ICEDCC
+		bool "Kernel low-level debugging via EmbeddedICE DCC channel"
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to the first serial port on MSM devices.
+		  their output to the EmbeddedICE macrocell's DCC channel using
+		  co-processor 14. This is known to work on the ARM9 style ICE
+		  channel and on the XScale with the PEEDI.
 
-	config DEBUG_MSM_UART2
-		bool "Kernel low-level debugging messages via MSM UART2"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the second serial port on MSM devices.
+		  Note that the system will appear to hang during boot if there
+		  is nothing connected to read from the DCC.
 
-	config DEBUG_MSM_UART3
-		bool "Kernel low-level debugging messages via MSM UART3"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+	config DEBUG_SEMIHOSTING
+		bool "Kernel low-level debug output via semihosting I"
 		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the third serial port on MSM devices.
+		  Semihosting enables code running on an ARM target to use
+		  the I/O facilities on a host debugger/emulator through a
+		  simple SVC calls. The host debugger or emulator must have
+		  semihosting enabled for the special svc call to be trapped
+		  otherwise the kernel will crash.
 
-	config DEBUG_MSM8660_UART
-		bool "Kernel low-level debugging messages via MSM 8660 UART"
-		depends on ARCH_MSM8X60
-		select MSM_HAS_DEBUG_UART_HS
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on MSM 8660 devices.
+		  This is known to work with OpenOCD, as wellas
+		  ARM's Fast Models, or any other controlling environment
+		  that implements semihosting.
 
-	config DEBUG_MSM8960_UART
-		bool "Kernel low-level debugging messages via MSM 8960 UART"
-		depends on ARCH_MSM8960
-		select MSM_HAS_DEBUG_UART_HS
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on MSM 8960 devices.
+		  For more details about semihosting, please see
+		  chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
 
 endchoice
 

arch/arm/include/asm/hardware/it8152.h

@@ -9,6 +9,9 @@
 
 #ifndef __ASM_HARDWARE_IT8152_H
 #define __ASM_HARDWARE_IT8152_H
+
+#include <mach/irqs.h>
+
 extern void __iomem *it8152_base_address;
 
 #define IT8152_IO_BASE			(it8152_base_address + 0x03e00000)

arch/arm/include/asm/irq.h

 #ifndef __ASM_ARM_IRQ_H
 #define __ASM_ARM_IRQ_H
 
+#define NR_IRQS_LEGACY	16
+
+#ifndef CONFIG_SPARSE_IRQ
 #include <mach/irqs.h>
+#else
+#define NR_IRQS NR_IRQS_LEGACY
+#endif
 
 #ifndef irq_canonicalize
 #define irq_canonicalize(i)	(i)
 #endif
 
-#define NR_IRQS_LEGACY	16
-
 /*
  * Use this value to indicate lack of interrupt
  * capability

arch/arm/include/asm/mc146818rtc.h

@@ -5,7 +5,9 @@
 #define _ASM_MC146818RTC_H
 
 #include <linux/io.h>
-#include <mach/irqs.h>
+#include <linux/kernel.h>
+
+#define RTC_IRQ BUILD_BUG_ON(1)
 
 #ifndef RTC_PORT
 #define RTC_PORT(x)	(0x70 + (x))

arch/arm/include/asm/system.h

@@ -79,6 +79,7 @@ extern void cpu_init(void);
 
 void soft_restart(unsigned long);
 extern void (*arm_pm_restart)(char str, const char *cmd);
+extern void (*arm_pm_idle)(void);
 
 #define UDBG_UNDEFINED	(1 << 0)
 #define UDBG_SYSCALL	(1 << 1)

arch/arm/kernel/Makefile

@@ -16,8 +16,8 @@ CFLAGS_REMOVE_return_address.o = -pg
 # Object file lists.
 
 obj-y		:= elf.o entry-armv.o entry-common.o irq.o opcodes.o \
-		   process.o ptrace.o return_address.o setup.o signal.o \
-		   sys_arm.o stacktrace.o time.o traps.o
+		   process.o ptrace.o return_address.o sched_clock.o \
+		   setup.o signal.o stacktrace.o sys_arm.o time.o traps.o
 
 obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o
 
@@ -32,7 +32,6 @@ obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
 obj-$(CONFIG_ARM_CPU_SUSPEND)	+= sleep.o suspend.o
-obj-$(CONFIG_HAVE_SCHED_CLOCK)	+= sched_clock.o
 obj-$(CONFIG_SMP)		+= smp.o smp_tlb.o
 obj-$(CONFIG_HAVE_ARM_SCU)	+= smp_scu.o
 obj-$(CONFIG_HAVE_ARM_TWD)	+= smp_twd.o

arch/arm/kernel/process.c

@@ -61,8 +61,6 @@ extern void setup_mm_for_reboot(void);
 
 static volatile int hlt_counter;
 
-#include <mach/system.h>
-
 void disable_hlt(void)
 {
 	hlt_counter++;
@@ -181,13 +179,17 @@ void cpu_idle_wait(void)
 EXPORT_SYMBOL_GPL(cpu_idle_wait);
 
 /*
- * This is our default idle handler.  We need to disable
- * interrupts here to ensure we don't miss a wakeup call.
+ * This is our default idle handler.
  */
+
+void (*arm_pm_idle)(void);
+
 static void default_idle(void)
 {
-	if (!need_resched())
-		arch_idle();
+	if (arm_pm_idle)
+		arm_pm_idle();
+	else
+		cpu_do_idle();
 	local_irq_enable();
 }
 
@@ -215,6 +217,10 @@ void cpu_idle(void)
 				cpu_die();
 #endif
 
+			/*
+			 * We need to disable interrupts here
+			 * to ensure we don't miss a wakeup call.
+			 */
 			local_irq_disable();
 #ifdef CONFIG_PL310_ERRATA_769419
 			wmb();
@@ -222,19 +228,18 @@ void cpu_idle(void)
 			if (hlt_counter) {
 				local_irq_enable();
 				cpu_relax();
-			} else {
+			} else if (!need_resched()) {
 				stop_critical_timings();
 				if (cpuidle_idle_call())
 					pm_idle();
 				start_critical_timings();
 				/*
-				 * This will eventually be removed - pm_idle
-				 * functions should always return with IRQs
-				 * enabled.
+				 * pm_idle functions must always
+				 * return with IRQs enabled.
 				 */
 				WARN_ON(irqs_disabled());
+			} else
 				local_irq_enable();
-			}
 		}
 		leds_event(led_idle_end);
 		rcu_idle_exit();

arch/arm/kernel/time.c

@@ -25,8 +25,6 @@
 #include <linux/timer.h>
 #include <linux/irq.h>
 
-#include <linux/mc146818rtc.h>
-
 #include <asm/leds.h>
 #include <asm/thread_info.h>
 #include <asm/sched_clock.h>
@@ -149,8 +147,6 @@ void __init time_init(void)
 {
 	system_timer = machine_desc->timer;
 	system_timer->init();
-#ifdef CONFIG_HAVE_SCHED_CLOCK
 	sched_clock_postinit();
-#endif
 }
 

arch/arm/mach-at91/at91cap9.c

@@ -14,6 +14,7 @@
 
 #include <linux/module.h>
 
+#include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -314,6 +315,12 @@ static struct at91_gpio_bank at91cap9_gpio[] __initdata = {
 	}
 };
 
+static void at91cap9_idle(void)
+{
+	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+	cpu_do_idle();
+}
+
 static void at91cap9_restart(char mode, const char *cmd)
 {
 	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
@@ -337,6 +344,7 @@ static void __init at91cap9_ioremap_registers(void)
 
 static void __init at91cap9_initialize(void)
 {
+	arm_pm_idle = at91cap9_idle;
 	arm_pm_restart = at91cap9_restart;
 	at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
 

arch/arm/mach-at91/at91rm9200.c

@@ -289,6 +289,15 @@ static struct at91_gpio_bank at91rm9200_gpio[] __initdata = {
 	}
 };
 
+static void at91rm9200_idle(void)
+{
+	/*
+	 * Disable the processor clock.  The processor will be automatically
+	 * re-enabled by an interrupt or by a reset.
+	 */
+	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+}
+
 static void at91rm9200_restart(char mode, const char *cmd)
 {
 	/*
@@ -314,6 +323,7 @@ static void __init at91rm9200_ioremap_registers(void)
 
 static void __init at91rm9200_initialize(void)
 {
+	arm_pm_idle = at91rm9200_idle;
 	arm_pm_restart = at91rm9200_restart;
 	at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
 			| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)

arch/arm/mach-at91/at91sam9260.c

@@ -12,6 +12,7 @@
 
 #include <linux/module.h>
 
+#include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -327,8 +328,15 @@ static void __init at91sam9260_ioremap_registers(void)
 	at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
 }
 
+static void at91sam9260_idle(void)
+{
+	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+	cpu_do_idle();
+}
+
 static void __init at91sam9260_initialize(void)
 {
+	arm_pm_idle = at91sam9260_idle;
 	arm_pm_restart = at91sam9_alt_restart;
 	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
 			| (1 << AT91SAM9260_ID_IRQ2);

arch/arm/mach-at91/at91sam9261.c

@@ -12,6 +12,7 @@
 
 #include <linux/module.h>
 
+#include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -285,8 +286,15 @@ static void __init at91sam9261_ioremap_registers(void)
 	at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
 }
 
+static void at91sam9261_idle(void)
+{
+	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+	cpu_do_idle();
+}
+
 static void __init at91sam9261_initialize(void)
 {
+	arm_pm_idle = at91sam9261_idle;
 	arm_pm_restart = at91sam9_alt_restart;
 	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
 			| (1 << AT91SAM9261_ID_IRQ2);

arch/arm/mach-at91/at91sam9263.c

@@ -12,6 +12,7 @@
 
 #include <linux/module.h>
 
+#include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -306,8 +307,15 @@ static void __init at91sam9263_ioremap_registers(void)
 	at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
 }
 
+static void at91sam9263_idle(void)
+{
+	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+	cpu_do_idle();
+}
+
 static void __init at91sam9263_initialize(void)
 {
+	arm_pm_idle = at91sam9263_idle;
 	arm_pm_restart = at91sam9_alt_restart;
 	at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
 

arch/arm/mach-at91/at91sam9g45.c

@@ -318,6 +318,12 @@ static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = {
 	}
 };
 
+static void at91sam9g45_idle(void)
+{
+	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+	cpu_do_idle();
+}
+
 static void at91sam9g45_restart(char mode, const char *cmd)
 {
 	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
@@ -342,6 +348,7 @@ static void __init at91sam9g45_ioremap_registers(void)
 
 static void __init at91sam9g45_initialize(void)
 {
+	arm_pm_idle = at91sam9g45_idle;
 	arm_pm_restart = at91sam9g45_restart;
 	at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
 

arch/arm/mach-at91/at91sam9rl.c

@@ -11,6 +11,7 @@
 
 #include <linux/module.h>
 
+#include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -290,8 +291,15 @@ static void __init at91sam9rl_ioremap_registers(void)
 	at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
 }
 
+static void at91sam9rl_idle(void)
+{
+	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+	cpu_do_idle();
+}
+
 static void __init at91sam9rl_initialize(void)
 {
+	arm_pm_idle = at91sam9rl_idle;
 	arm_pm_restart = at91sam9_alt_restart;
 	at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
 

arch/arm/mach-at91/at91x40.c

@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <asm/proc-fns.h>
 #include <asm/mach/arch.h>
 #include <mach/at91x40.h>
 #include <mach/at91_st.h>
@@ -37,8 +38,19 @@ unsigned long clk_get_rate(struct clk *clk)
 	return AT91X40_MASTER_CLOCK;
 }
 
+static void at91x40_idle(void)
+{
+	/*
+	 * Disable the processor clock.  The processor will be automatically
+	 * re-enabled by an interrupt or by a reset.
+	 */
+	at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
+	cpu_do_idle();
+}
+
 void __init at91x40_initialize(unsigned long main_clock)
 {
+	arm_pm_idle = at91x40_idle;
 	at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
 			| (1 << AT91X40_ID_IRQ2);
 }

arch/arm/mach-at91/include/mach/system.h

-/*
- * arch/arm/mach-at91/include/mach/system.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/hardware.h>
-#include <mach/at91_st.h>
-#include <mach/at91_dbgu.h>
-#include <mach/at91_pmc.h>
-
-static inline void arch_idle(void)
-{
-	/*
-	 * Disable the processor clock.  The processor will be automatically
-	 * re-enabled by an interrupt or by a reset.
-	 */
-#ifdef AT91_PS
-	at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
-#else
-	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-#endif
-#ifndef CONFIG_CPU_ARM920T
-	/*
-	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
-	 * Post-RM9200 processors need this in conjunction with the above
-	 * to save power when idle.
-	 */
-	cpu_do_idle();
-#endif
-}
-
-#endif

arch/arm/mach-bcmring/core.c

@@ -52,27 +52,8 @@
 #include <mach/csp/chipcHw_inline.h>
 #include <mach/csp/tmrHw_reg.h>
 
-#define AMBA_DEVICE(name, initname, base, plat, size)       \
-static struct amba_device name##_device = {     \
-   .dev = {                                     \
-      .coherent_dma_mask = ~0,                  \
-      .init_name = initname,                    \
-      .platform_data = plat                     \
-   },                                           \
-   .res = {                                     \
-      .start = MM_ADDR_IO_##base,               \
-		.end = MM_ADDR_IO_##base + (size) - 1,    \
-      .flags = IORESOURCE_MEM                   \
-   },                                           \
-   .dma_mask = ~0,                              \
-   .irq = {                                     \
-      IRQ_##base                                \
-   }                                            \
-}
-
-
-AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
-AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
+static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL);
+static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL);
 
 static struct clk pll1_clk = {
 	.name = "PLL1",

arch/arm/mach-bcmring/include/mach/system.h

-/*
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-clps711x/common.c

@@ -225,3 +225,19 @@ void clps711x_restart(char mode, const char *cmd)
 {
 	soft_restart(0);
 }
+
+static void clps711x_idle(void)
+{
+	clps_writel(1, HALT);
+	__asm__ __volatile__(
+	"mov    r0, r0\n\
+	mov     r0, r0");
+}
+
+static int __init clps711x_idle_init(void)
+{
+	arm_pm_idle = clps711x_idle;
+	return 0;
+}
+
+arch_initcall(clps711x_idle_init);

arch/arm/mach-clps711x/include/mach/system.h

-/*
- *  arch/arm/mach-clps711x/include/mach/system.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-static inline void arch_idle(void)
-{
-	clps_writel(1, HALT);
-	__asm__ __volatile__(
-	"mov	r0, r0\n\
-	mov	r0, r0");
-}
-
-#endif

arch/arm/mach-cns3xxx/include/mach/system.h

-/*
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-davinci/include/mach/system.h

-/*
- * DaVinci system defines
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/common.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */

arch/arm/mach-davinci/time.c

@@ -19,11 +19,14 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
+#include <asm/sched_clock.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
+
 #include <mach/cputype.h>
+#include <mach/hardware.h>
 #include <mach/time.h>
+
 #include "clock.h"
 
 static struct clock_event_device clockevent_davinci;
@@ -272,19 +275,9 @@ static cycle_t read_cycles(struct clocksource *cs)
 	return (cycles_t)timer32_read(t);
 }
 
-/*
- * Kernel assumes that sched_clock can be called early but may not have
- * things ready yet.
- */
-static cycle_t read_dummy(struct clocksource *cs)
-{
-	return 0;
-}
-
-
 static struct clocksource clocksource_davinci = {
 	.rating		= 300,
-	.read		= read_dummy,
+	.read		= read_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
@@ -292,12 +285,9 @@ static struct clocksource clocksource_davinci = {
 /*
  * Overwrite weak default sched_clock with something more precise
  */
-unsigned long long notrace sched_clock(void)
+static u32 notrace davinci_read_sched_clock(void)
 {
-	const cycle_t cyc = clocksource_davinci.read(&clocksource_davinci);
-
-	return clocksource_cyc2ns(cyc, clocksource_davinci.mult,
-				clocksource_davinci.shift);
+	return timer32_read(&timers[TID_CLOCKSOURCE]);
 }
 
 /*
@@ -397,12 +387,14 @@ static void __init davinci_timer_init(void)
 	davinci_clock_tick_rate = clk_get_rate(timer_clk);
 
 	/* setup clocksource */
-	clocksource_davinci.read = read_cycles;
 	clocksource_davinci.name = id_to_name[clocksource_id];
 	if (clocksource_register_hz(&clocksource_davinci,
 				    davinci_clock_tick_rate))
 		printk(err, clocksource_davinci.name);
 
+	setup_sched_clock(davinci_read_sched_clock, 32,
+			  davinci_clock_tick_rate);
+
 	/* setup clockevent */
 	clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id];
 	clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,

arch/arm/mach-dove/include/mach/system.h

-/*
- * arch/arm/mach-dove/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-ebsa110/core.c

@@ -271,8 +271,33 @@ static struct platform_device *ebsa110_devices[] = {
 	&am79c961_device,
 };
 
+/*
+ * EBSA110 idling methodology:
+ *
+ * We can not execute the "wait for interrupt" instruction since that
+ * will stop our MCLK signal (which provides the clock for the glue
+ * logic, and therefore the timer interrupt).
+ *
+ * Instead, we spin, polling the IRQ_STAT register for the occurrence
+ * of any interrupt with core clock down to the memory clock.
+ */
+static void ebsa110_idle(void)
+{
+	const char *irq_stat = (char *)0xff000000;
+
+	/* disable clock switching */
+	asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
+
+	/* wait for an interrupt to occur */
+	while (!*irq_stat);
+
+	/* enable clock switching */
+	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
+}
+
 static int __init ebsa110_init(void)
 {
+	arm_pm_idle = ebsa110_idle;
 	return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices));
 }
 

arch/arm/mach-ebsa110/include/mach/system.h

-/*
- *  arch/arm/mach-ebsa110/include/mach/system.h
- *
- *  Copyright (C) 1996-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-/*
- * EBSA110 idling methodology:
- *
- * We can not execute the "wait for interrupt" instruction since that
- * will stop our MCLK signal (which provides the clock for the glue
- * logic, and therefore the timer interrupt).
- *
- * Instead, we spin, polling the IRQ_STAT register for the occurrence
- * of any interrupt with core clock down to the memory clock.
- */
-static inline void arch_idle(void)
-{
-	const char *irq_stat = (char *)0xff000000;
-
-	/* disable clock switching */
-	asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
-
-	/* wait for an interrupt to occur */
-	while (!*irq_stat);
-
-	/* enable clock switching */
-	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
-}
-
-#endif

arch/arm/mach-ep93xx/core.c

@@ -279,48 +279,14 @@ static struct amba_pl010_data ep93xx_uart_data = {
 	.set_mctrl	= ep93xx_uart_set_mctrl,
 };
 
-static struct amba_device uart1_device = {
-	.dev		= {
-		.init_name	= "apb:uart1",
-		.platform_data	= &ep93xx_uart_data,
-	},
-	.res		= {
-		.start	= EP93XX_UART1_PHYS_BASE,
-		.end	= EP93XX_UART1_PHYS_BASE + 0x0fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_EP93XX_UART1, NO_IRQ },
-	.periphid	= 0x00041010,
-};
-
-static struct amba_device uart2_device = {
-	.dev		= {
-		.init_name	= "apb:uart2",
-		.platform_data	= &ep93xx_uart_data,
-	},
-	.res		= {
-		.start	= EP93XX_UART2_PHYS_BASE,
-		.end	= EP93XX_UART2_PHYS_BASE + 0x0fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_EP93XX_UART2, NO_IRQ },
-	.periphid	= 0x00041010,
-};
+static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE,
+	{ IRQ_EP93XX_UART1 }, &ep93xx_uart_data);
 
-static struct amba_device uart3_device = {
-	.dev		= {
-		.init_name	= "apb:uart3",
-		.platform_data	= &ep93xx_uart_data,
-	},
-	.res		= {
-		.start	= EP93XX_UART3_PHYS_BASE,
-		.end	= EP93XX_UART3_PHYS_BASE + 0x0fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_EP93XX_UART3, NO_IRQ },
-	.periphid	= 0x00041010,
-};
+static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE,
+	{ IRQ_EP93XX_UART2 }, &ep93xx_uart_data);
 
+static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
+	{ IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
 
 static struct resource ep93xx_rtc_resource[] = {
 	{

arch/arm/mach-ep93xx/include/mach/system.h

-/*
- * arch/arm/mach-ep93xx/include/mach/system.h
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}

arch/arm/mach-exynos/common.c

@@ -201,14 +201,6 @@ static struct map_desc exynos4_iodesc1[] __initdata = {
 	},
 };
 
-static void exynos_idle(void)
-{
-	if (!need_resched())
-		cpu_do_idle();
-
-	local_irq_enable();
-}
-
 void exynos4_restart(char mode, const char *cmd)
 {
 	__raw_writel(0x1, S5P_SWRESET);
@@ -467,10 +459,6 @@ early_initcall(exynos4_l2x0_cache_init);
 int __init exynos_init(void)
 {
 	printk(KERN_INFO "EXYNOS: Initializing architecture\n");
-
-	/* set idle function */
-	pm_idle = exynos_idle;
-
 	return device_register(&exynos4_dev);
 }
 

arch/arm/mach-exynos/dma.c

@@ -74,21 +74,8 @@ struct dma_pl330_platdata exynos4_pdma0_pdata = {
 	.peri_id = pdma0_peri,
 };
 
-struct amba_device exynos4_device_pdma0 = {
-	.dev = {
-		.init_name = "dma-pl330.0",
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &exynos4_pdma0_pdata,
-	},
-	.res = {
-		.start = EXYNOS4_PA_PDMA0,
-		.end = EXYNOS4_PA_PDMA0 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_PDMA0, NO_IRQ},
-	.periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330, EXYNOS4_PA_PDMA0,
+	{IRQ_PDMA0}, &exynos4_pdma0_pdata);
 
 u8 pdma1_peri[] = {
 	DMACH_PCM0_RX,
@@ -123,21 +110,8 @@ struct dma_pl330_platdata exynos4_pdma1_pdata = {
 	.peri_id = pdma1_peri,
 };
 
-struct amba_device exynos4_device_pdma1 = {
-	.dev = {
-		.init_name = "dma-pl330.1",
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &exynos4_pdma1_pdata,
-	},
-	.res = {
-		.start = EXYNOS4_PA_PDMA1,
-		.end = EXYNOS4_PA_PDMA1 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_PDMA1, NO_IRQ},
-	.periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(exynos4_pdma1,  "dma-pl330.1", 0x00041330, EXYNOS4_PA_PDMA1,
+	{IRQ_PDMA1}, &exynos4_pdma1_pdata);
 
 static int __init exynos4_dma_init(void)
 {
@@ -146,11 +120,11 @@ static int __init exynos4_dma_init(void)
 
 	dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
 	dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
-	amba_device_register(&exynos4_device_pdma0, &iomem_resource);
+	amba_device_register(&exynos4_pdma0_device, &iomem_resource);
 
 	dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask);
 	dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
-	amba_device_register(&exynos4_device_pdma1, &iomem_resource);
+	amba_device_register(&exynos4_pdma1_device, &iomem_resource);
 
 	return 0;
 }

arch/arm/mach-exynos/include/mach/system.h

-/* linux/arch/arm/mach-exynos4/include/mach/system.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
-	/* nothing here yet */
-}
-#endif /* __ASM_ARCH_SYSTEM_H */

arch/arm/mach-footbridge/include/mach/system.h

-/*
- *  arch/arm/mach-footbridge/include/mach/system.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}

arch/arm/mach-gemini/Makefile

@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y			:= irq.o mm.o time.o devices.o gpio.o
+obj-y			:= irq.o mm.o time.o devices.o gpio.o idle.o
 
 # Board-specific support
 obj-$(CONFIG_MACH_NAS4220B)	+= board-nas4220b.o

arch/arm/mach-gemini/idle.c

+/*
+ * arch/arm/mach-gemini/idle.c
+ */
+
+#include <linux/init.h>
+#include <asm/system.h>
+#include <asm/proc-fns.h>
+
+static void gemini_idle(void)
+{
+	/*
+	 * Because of broken hardware we have to enable interrupts or the CPU
+	 * will never wakeup... Acctualy it is not very good to enable
+	 * interrupts first since scheduler can miss a tick, but there is
+	 * no other way around this. Platforms that needs it for power saving
+	 * should call enable_hlt() in init code, since by default it is
+	 * disabled.
+	 */
+	local_irq_enable();
+	cpu_do_idle();
+}
+
+static int __init gemini_idle_init(void)
+{
+	arm_pm_idle = gemini_idle;
+	return 0;
+}
+
+arch_initcall(gemini_idle_init);

arch/arm/mach-gemini/include/mach/system.h

@@ -14,20 +14,6 @@
 #include <mach/hardware.h>
 #include <mach/global_reg.h>
 
-static inline void arch_idle(void)
-{
-	/*
-	 * Because of broken hardware we have to enable interrupts or the CPU
-	 * will never wakeup... Acctualy it is not very good to enable
-	 * interrupts here since scheduler can miss a tick, but there is
-	 * no other way around this. Platforms that needs it for power saving
-	 * should call enable_hlt() in init code, since by default it is
-	 * disabled.
-	 */
-	local_irq_enable();
-	cpu_do_idle();
-}
-
 static inline void arch_reset(char mode, const char *cmd)
 {
 	__raw_writel(RESET_GLOBAL | RESET_CPU1,

arch/arm/mach-gemini/irq.c

@@ -73,8 +73,8 @@ void __init gemini_init_irq(void)
 	unsigned int i, mode = 0, level = 0;
 
 	/*
-	 * Disable arch_idle() by default since it is buggy
-	 * For more info see arch/arm/mach-gemini/include/mach/system.h
+	 * Disable the idle handler by default since it is buggy
+	 * For more info see arch/arm/mach-gemini/idle.c
 	 */
 	disable_hlt();
 

arch/arm/mach-h720x/common.c

@@ -247,3 +247,21 @@ void h720x_restart(char mode, const char *cmd)
 {
 	CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
 }
+
+static void h720x__idle(void)
+{
+	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
+	nop();
+	nop();
+	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
+	nop();
+	nop();
+}
+
+static int __init h720x_idle_init(void)
+{
+	arm_pm_idle = h720x__idle;
+	return 0;
+}
+
+arch_initcall(h720x_idle_init);

arch/arm/mach-h720x/include/mach/system.h

-/*
- * arch/arm/mach-h720x/include/mach/system.h
- *
- * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * arch/arm/mach-h720x/include/mach/system.h
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <mach/hardware.h>
-
-static void arch_idle(void)
-{
-	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
-	nop();
-	nop();
-	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
-	nop();
-	nop();
-}
-
-#endif

arch/arm/mach-highbank/highbank.c

@@ -33,7 +33,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <mach/irqs.h>
 
 #include "core.h"
 #include "sysregs.h"

arch/arm/mach-highbank/include/mach/irqs.h

-#ifndef __MACH_IRQS_H
-#define __MACH_IRQS_H
-
-#define NR_IRQS			192
-
-#endif

arch/arm/mach-highbank/include/mach/system.h

-/*
- * Copyright 2010-2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-imx/mm-imx3.c

@@ -34,31 +34,29 @@ static void imx3_idle(void)
 {
 	unsigned long reg = 0;
 
-	if (!need_resched())
-		__asm__ __volatile__(
-			/* disable I and D cache */
-			"mrc p15, 0, %0, c1, c0, 0\n"
-			"bic %0, %0, #0x00001000\n"
-			"bic %0, %0, #0x00000004\n"
-			"mcr p15, 0, %0, c1, c0, 0\n"
-			/* invalidate I cache */
-			"mov %0, #0\n"
-			"mcr p15, 0, %0, c7, c5, 0\n"
-			/* clear and invalidate D cache */
-			"mov %0, #0\n"
-			"mcr p15, 0, %0, c7, c14, 0\n"
-			/* WFI */
-			"mov %0, #0\n"
-			"mcr p15, 0, %0, c7, c0, 4\n"
-			"nop\n" "nop\n" "nop\n" "nop\n"
-			"nop\n" "nop\n" "nop\n"
-			/* enable I and D cache */
-			"mrc p15, 0, %0, c1, c0, 0\n"
-			"orr %0, %0, #0x00001000\n"
-			"orr %0, %0, #0x00000004\n"
-			"mcr p15, 0, %0, c1, c0, 0\n"
-			: "=r" (reg));
-	local_irq_enable();
+	__asm__ __volatile__(
+		/* disable I and D cache */
+		"mrc p15, 0, %0, c1, c0, 0\n"
+		"bic %0, %0, #0x00001000\n"
+		"bic %0, %0, #0x00000004\n"
+		"mcr p15, 0, %0, c1, c0, 0\n"
+		/* invalidate I cache */
+		"mov %0, #0\n"
+		"mcr p15, 0, %0, c7, c5, 0\n"
+		/* clear and invalidate D cache */
+		"mov %0, #0\n"
+		"mcr p15, 0, %0, c7, c14, 0\n"
+		/* WFI */
+		"mov %0, #0\n"
+		"mcr p15, 0, %0, c7, c0, 4\n"
+		"nop\n" "nop\n" "nop\n" "nop\n"
+		"nop\n" "nop\n" "nop\n"
+		/* enable I and D cache */
+		"mrc p15, 0, %0, c1, c0, 0\n"
+		"orr %0, %0, #0x00001000\n"
+		"orr %0, %0, #0x00000004\n"
+		"mcr p15, 0, %0, c1, c0, 0\n"
+		: "=r" (reg));
 }
 
 static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
@@ -134,8 +132,8 @@ void __init imx31_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX31);
 	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-	pm_idle = imx3_idle;
 	imx_ioremap = imx3_ioremap;
+	arm_pm_idle = imx3_idle;
 }
 
 void __init mx31_init_irq(void)
@@ -197,7 +195,7 @@ void __init imx35_init_early(void)
 	mxc_set_cpu_type(MXC_CPU_MX35);
 	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-	pm_idle = imx3_idle;
+	arm_pm_idle = imx3_idle;
 	imx_ioremap = imx3_ioremap;
 }
 

arch/arm/mach-imx/pm-imx27.c

@@ -10,7 +10,6 @@
 #include <linux/kernel.h>
 #include <linux/suspend.h>
 #include <linux/io.h>
-#include <mach/system.h>
 #include <mach/hardware.h>
 
 static int mx27_suspend_enter(suspend_state_t state)
@@ -23,7 +22,7 @@ static int mx27_suspend_enter(suspend_state_t state)
 		cscr &= 0xFFFFFFFC;
 		__raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
 		/* Executes WFI */
-		arch_idle();
+		cpu_do_idle();
 		break;
 
 	default:

arch/arm/mach-integrator/Kconfig

@@ -5,7 +5,6 @@ menu "Integrator Options"
 config ARCH_INTEGRATOR_AP
 	bool "Support Integrator/AP and Integrator/PP2 platforms"
 	select CLKSRC_MMIO
-	select HAVE_SCHED_CLOCK
 	select MIGHT_HAVE_PCI
 	select SERIAL_AMBA_PL010
 	select SERIAL_AMBA_PL010_CONSOLE

arch/arm/mach-integrator/core.c

@@ -36,67 +36,23 @@
 
 static struct amba_pl010_data integrator_uart_data;
 
-static struct amba_device rtc_device = {
-	.dev		= {
-		.init_name = "mb:15",
-	},
-	.res		= {
-		.start	= INTEGRATOR_RTC_BASE,
-		.end	= INTEGRATOR_RTC_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_RTCINT, NO_IRQ },
-};
+#define INTEGRATOR_RTC_IRQ	{ IRQ_RTCINT }
+#define INTEGRATOR_UART0_IRQ	{ IRQ_UARTINT0 }
+#define INTEGRATOR_UART1_IRQ	{ IRQ_UARTINT1 }
+#define KMI0_IRQ		{ IRQ_KMIINT0 }
+#define KMI1_IRQ		{ IRQ_KMIINT1 }
 
-static struct amba_device uart0_device = {
-	.dev		= {
-		.init_name = "mb:16",
-		.platform_data = &integrator_uart_data,
-	},
-	.res		= {
-		.start	= INTEGRATOR_UART0_BASE,
-		.end	= INTEGRATOR_UART0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_UARTINT0, NO_IRQ },
-};
+static AMBA_APB_DEVICE(rtc, "mb:15", 0,
+	INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
 
-static struct amba_device uart1_device = {
-	.dev		= {
-		.init_name = "mb:17",
-		.platform_data = &integrator_uart_data,
-	},
-	.res		= {
-		.start	= INTEGRATOR_UART1_BASE,
-		.end	= INTEGRATOR_UART1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_UARTINT1, NO_IRQ },
-};
+static AMBA_APB_DEVICE(uart0, "mb:16", 0,
+	INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data);
 
-static struct amba_device kmi0_device = {
-	.dev		= {
-		.init_name = "mb:18",
-	},
-	.res		= {
-		.start	= KMI0_BASE,
-		.end	= KMI0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_KMIINT0, NO_IRQ },
-};
+static AMBA_APB_DEVICE(uart1, "mb:17", 0,
+	INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data);
 
-static struct amba_device kmi1_device = {
-	.dev		= {
-		.init_name = "mb:19",
-	},
-	.res		= {
-		.start	= KMI1_BASE,
-		.end	= KMI1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_KMIINT1, NO_IRQ },
-};
+static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL);
+static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&rtc_device,

arch/arm/mach-integrator/impd1.c

@@ -401,24 +401,21 @@ static int impd1_probe(struct lm_device *dev)
 
 		pc_base = dev->resource.start + idev->offset;
 
-		d = kzalloc(sizeof(struct amba_device), GFP_KERNEL);
+		d = amba_device_alloc(NULL, pc_base, SZ_4K);
 		if (!d)
 			continue;
 
 		dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
 		d->dev.parent	= &dev->dev;
-		d->res.start	= dev->resource.start + idev->offset;
-		d->res.end	= d->res.start + SZ_4K - 1;
-		d->res.flags	= IORESOURCE_MEM;
 		d->irq[0]	= dev->irq;
 		d->irq[1]	= dev->irq;
 		d->periphid	= idev->id;
 		d->dev.platform_data = idev->platform_data;
 
-		ret = amba_device_register(d, &dev->resource);
+		ret = amba_device_add(d, &dev->resource);
 		if (ret) {
 			dev_err(&d->dev, "unable to register device: %d\n", ret);
-			kfree(d);
+			amba_device_put(d);
 		}
 	}
 

arch/arm/mach-integrator/include/mach/system.h

-/*
- *  arch/arm/mach-integrator/include/mach/system.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-integrator/integrator_cp.c

@@ -347,32 +347,14 @@ static struct mmci_platform_data mmc_data = {
 	.gpio_cd	= -1,
 };
 
-static struct amba_device mmc_device = {
-	.dev		= {
-		.init_name = "mb:1c",
-		.platform_data = &mmc_data,
-	},
-	.res		= {
-		.start	= INTEGRATOR_CP_MMC_BASE,
-		.end	= INTEGRATOR_CP_MMC_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 },
-	.periphid	= 0,
-};
+#define INTEGRATOR_CP_MMC_IRQS	{ IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
+#define INTEGRATOR_CP_AACI_IRQS	{ IRQ_CP_AACIINT }
 
-static struct amba_device aaci_device = {
-	.dev		= {
-		.init_name = "mb:1d",
-	},
-	.res		= {
-		.start	= INTEGRATOR_CP_AACI_BASE,
-		.end	= INTEGRATOR_CP_AACI_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_CP_AACIINT, NO_IRQ },
-	.periphid	= 0,
-};
+static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE,
+	INTEGRATOR_CP_MMC_IRQS, &mmc_data);
+
+static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE,
+	INTEGRATOR_CP_AACI_IRQS, NULL);
 
 
 /*
@@ -425,21 +407,8 @@ static struct clcd_board clcd_data = {
 	.remove		= versatile_clcd_remove_dma,
 };
 
-static struct amba_device clcd_device = {
-	.dev		= {
-		.init_name = "mb:c0",
-		.coherent_dma_mask = ~0,
-		.platform_data = &clcd_data,
-	},
-	.res		= {
-		.start	= INTCP_PA_CLCD_BASE,
-		.end	= INTCP_PA_CLCD_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.dma_mask	= ~0,
-	.irq		= { IRQ_CP_CLCDCINT, NO_IRQ },
-	.periphid	= 0,
-};
+static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE,
+	{ IRQ_CP_CLCDCINT }, &clcd_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&mmc_device,

arch/arm/mach-iop13xx/include/mach/system.h

-/*
- * arch/arm/mach-iop13xx/include/mach/system.h
- *
- *  Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}

arch/arm/mach-iop32x/include/mach/system.h

-/*
- * arch/arm/mach-iop32x/include/mach/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}

arch/arm/mach-iop33x/include/mach/system.h

-/*
- * arch/arm/mach-iop33x/include/mach/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}

arch/arm/mach-ixp2000/include/mach/system.h

-/*
- * arch/arm/mach-ixp2000/include/mach/system.h
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyricht (C) 2003-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}

arch/arm/mach-ixp23xx/core.c

@@ -441,6 +441,9 @@ static struct platform_device *ixp23xx_devices[] __initdata = {
 
 void __init ixp23xx_sys_init(void)
 {
+	/* by default, the idle code is disabled */
+	disable_hlt();
+
 	*IXP23XX_EXP_UNIT_FUSE |= 0xf;
 	platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
 }

arch/arm/mach-ixp23xx/include/mach/system.h

-/*
- * arch/arm/mach-ixp23xx/include/mach/system.h
- *
- * Copyright (C) 2003 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-#if 0
-	if (!hlt_counter)
-		cpu_do_idle();
-#endif
-}

arch/arm/mach-ixp4xx/common.c

@@ -236,6 +236,12 @@ void __init ixp4xx_init_irq(void)
 {
 	int i = 0;
 
+	/*
+	 * ixp4xx does not implement the XScale PWRMODE register
+	 * so it must not call cpu_do_idle().
+	 */
+	disable_hlt();
+
 	/* Route all sources to IRQ instead of FIQ */
 	*IXP4XX_ICLR = 0x0;
 

arch/arm/mach-ixp4xx/include/mach/system.h

-/*
- * arch/arm/mach-ixp4xx/include/mach/system.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-static inline void arch_idle(void)
-{
-	/* ixp4xx does not implement the XScale PWRMODE register,
-	 * so it must not call cpu_do_idle() here.
-	 */
-#if 0
-	cpu_do_idle();
-#endif
-}

arch/arm/mach-kirkwood/include/mach/system.h

-/*
- * arch/arm/mach-kirkwood/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-ks8695/include/mach/system.h

-/*
- * arch/arm/mach-s3c2410/include/mach/system.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * KS8695 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks,
-	 */
-	cpu_do_idle();
-
-}
-
-#endif

arch/arm/mach-lpc32xx/include/mach/system.h

-/*
- * arch/arm/mach-lpc32xx/include/mach/system.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-lpc32xx/phy3250.c

@@ -149,20 +149,8 @@ static struct clcd_board lpc32xx_clcd_data = {
 	.remove		= lpc32xx_clcd_remove,
 };
 
-static struct amba_device lpc32xx_clcd_device = {
-	.dev				= {
-		.coherent_dma_mask	= ~0,
-		.init_name		= "dev:clcd",
-		.platform_data		= &lpc32xx_clcd_data,
-	},
-	.res				= {
-		.start			= LPC32XX_LCD_BASE,
-		.end			= (LPC32XX_LCD_BASE + SZ_4K - 1),
-		.flags			= IORESOURCE_MEM,
-	},
-	.dma_mask			= ~0,
-	.irq				= {IRQ_LPC32XX_LCD, NO_IRQ},
-};
+static AMBA_AHB_DEVICE(lpc32xx_clcd, "dev:clcd", 0,
+	LPC32XX_LCD_BASE, { IRQ_LPC32XX_LCD }, &lpc32xx_clcd_data);
 
 /*
  * AMBA SSP (SPI)
@@ -191,20 +179,8 @@ static struct pl022_ssp_controller lpc32xx_ssp0_data = {
 	.enable_dma		= 0,
 };
 
-static struct amba_device lpc32xx_ssp0_device = {
-	.dev				= {
-		.coherent_dma_mask	= ~0,
-		.init_name		= "dev:ssp0",
-		.platform_data		= &lpc32xx_ssp0_data,
-	},
-	.res				= {
-		.start			= LPC32XX_SSP0_BASE,
-		.end			= (LPC32XX_SSP0_BASE + SZ_4K - 1),
-		.flags			= IORESOURCE_MEM,
-	},
-	.dma_mask			= ~0,
-	.irq				= {IRQ_LPC32XX_SSP0, NO_IRQ},
-};
+static AMBA_APB_DEVICE(lpc32xx_ssp0, "dev:ssp0", 0,
+	LPC32XX_SSP0_BASE, { IRQ_LPC32XX_SSP0 }, &lpc32xx_ssp0_data);
 
 /* AT25 driver registration */
 static int __init phy3250_spi_board_register(void)

arch/arm/mach-mmp/aspenite.c

@@ -24,6 +24,7 @@
 #include <mach/addr-map.h>
 #include <mach/mfp-pxa168.h>
 #include <mach/pxa168.h>
+#include <mach/irqs.h>
 #include <video/pxa168fb.h>
 #include <linux/input.h>
 #include <plat/pxa27x_keypad.h>
@@ -240,7 +241,7 @@ static void __init common_init(void)
 
 MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
 	.map_io		= mmp_map_io,
-	.nr_irqs	= IRQ_BOARD_START,
+	.nr_irqs	= MMP_NR_IRQS,
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
 	.init_machine   = common_init,
@@ -249,7 +250,7 @@ MACHINE_END
 
 MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
 	.map_io		= mmp_map_io,
-	.nr_irqs	= IRQ_BOARD_START,
+	.nr_irqs	= MMP_NR_IRQS,
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
 	.init_machine   = common_init,

arch/arm/mach-mmp/avengers_lite.c

@@ -43,6 +43,7 @@ static void __init avengers_lite_init(void)
 
 MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
 	.map_io		= mmp_map_io,
+	.nr_irqs	= MMP_NR_IRQS,
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
 	.init_machine   = avengers_lite_init,

arch/arm/mach-mmp/brownstone.c

@@ -28,7 +28,7 @@
 
 #include "common.h"
 
-#define BROWNSTONE_NR_IRQS	(IRQ_BOARD_START + 40)
+#define BROWNSTONE_NR_IRQS	(MMP_NR_IRQS + 40)
 
 #define GPIO_5V_ENABLE		(89)
 
@@ -158,7 +158,7 @@ static struct platform_device brownstone_v_5vp_device = {
 };
 
 static struct max8925_platform_data brownstone_max8925_info = {
-	.irq_base		= IRQ_BOARD_START,
+	.irq_base		= MMP_NR_IRQS,
 };
 
 static struct i2c_board_info brownstone_twsi1_info[] = {

arch/arm/mach-mmp/flint.c

@@ -23,10 +23,11 @@
 #include <mach/addr-map.h>
 #include <mach/mfp-mmp2.h>
 #include <mach/mmp2.h>
+#include <mach/irqs.h>
 
 #include "common.h"
 
-#define FLINT_NR_IRQS	(IRQ_BOARD_START + 48)
+#define FLINT_NR_IRQS	(MMP_NR_IRQS + 48)
 
 static unsigned long flint_pin_config[] __initdata = {
 	/* UART1 */

arch/arm/mach-mmp/gplugd.c

@@ -191,7 +191,7 @@ static void __init gplugd_init(void)
 
 MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform")
 	.map_io		= mmp_map_io,
-	.nr_irqs	= IRQ_BOARD_START,
+	.nr_irqs	= MMP_NR_IRQS,
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
 	.init_machine   = gplugd_init,

arch/arm/mach-mmp/include/mach/irqs.h

@@ -223,7 +223,6 @@
 #define MMP_GPIO_TO_IRQ(gpio)		(IRQ_GPIO_START + (gpio))
 
 #define IRQ_BOARD_START			(IRQ_GPIO_START + MMP_NR_BUILTIN_GPIO)
-
-#define NR_IRQS				(IRQ_BOARD_START)
+#define MMP_NR_IRQS			IRQ_BOARD_START
 
 #endif /* __ASM_MACH_IRQS_H */

arch/arm/mach-mmp/include/mach/system.h

-/*
- * linux/arch/arm/mach-mmp/include/mach/system.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_SYSTEM_H
-#define __ASM_MACH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-#endif /* __ASM_MACH_SYSTEM_H */

arch/arm/mach-mmp/irq-mmp2.c

@@ -15,6 +15,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 
+#include <mach/irqs.h>
 #include <mach/regs-icu.h>
 #include <mach/mmp2.h>
 

arch/arm/mach-mmp/jasper.c

@@ -19,6 +19,7 @@
 #include <linux/mfd/max8925.h>
 #include <linux/interrupt.h>
 
+#include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/addr-map.h>
@@ -27,7 +28,7 @@
 
 #include "common.h"
 
-#define JASPER_NR_IRQS		(IRQ_BOARD_START + 48)
+#define JASPER_NR_IRQS		(MMP_NR_IRQS + 48)
 
 static unsigned long jasper_pin_config[] __initdata = {
 	/* UART1 */
@@ -135,7 +136,7 @@ static struct max8925_power_pdata jasper_power_data = {
 static struct max8925_platform_data jasper_max8925_info = {
 	.backlight		= &jasper_backlight_data,
 	.power			= &jasper_power_data,
-	.irq_base		= IRQ_BOARD_START,
+	.irq_base		= MMP_NR_IRQS,
 };
 
 static struct i2c_board_info jasper_twsi1_info[] = {

arch/arm/mach-mmp/tavorevb.c

@@ -102,6 +102,7 @@ static void __init tavorevb_init(void)
 
 MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)")
 	.map_io		= mmp_map_io,
+	.nr_irqs	= MMP_NR_IRQS,
 	.init_irq       = pxa910_init_irq,
 	.timer          = &pxa910_timer,
 	.init_machine   = tavorevb_init,

arch/arm/mach-mmp/teton_bga.c

@@ -26,6 +26,7 @@
 #include <mach/mfp-pxa168.h>
 #include <mach/pxa168.h>
 #include <mach/teton_bga.h>
+#include <mach/irqs.h>
 
 #include "common.h"
 
@@ -83,7 +84,7 @@ static void __init teton_bga_init(void)
 
 MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
 	.map_io		= mmp_map_io,
-	.nr_irqs	= IRQ_BOARD_START,
+	.nr_irqs	= MMP_NR_IRQS,
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
 	.init_machine   = teton_bga_init,

arch/arm/mach-mmp/ttc_dkb.c

@@ -38,7 +38,7 @@
  * 16 board interrupts -- PCA9575 GPIO expander
  * 24 board interrupts -- 88PM860x PMIC
  */
-#define TTCDKB_NR_IRQS		(IRQ_BOARD_START + 16 + 16 + 24)
+#define TTCDKB_NR_IRQS		(MMP_NR_IRQS + 16 + 16 + 24)
 
 static unsigned long ttc_dkb_pin_config[] __initdata = {
 	/* UART2 */
@@ -130,7 +130,7 @@ static struct platform_device *ttc_dkb_devices[] = {
 static struct pca953x_platform_data max7312_data[] = {
 	{
 		.gpio_base	= TTCDKB_GPIO_EXT0(0),
-		.irq_base	= IRQ_BOARD_START,
+		.irq_base	= MMP_NR_IRQS,
 	},
 };
 

arch/arm/mach-msm/idle.S → arch/arm/mach-msm/idle.c

-/* arch/arm/mach-msm/include/mach/idle.S
+/* arch/arm/mach-msm/idle.c
  *
  * Idle processing for MSM7K - work around bugs with SWFI.
  *
  * Copyright (c) 2007 QUALCOMM Incorporated.
- * Copyright (C) 2007 Google, Inc. 
+ * Copyright (C) 2007 Google, Inc.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -14,23 +14,36 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
- */ 
-		
-#include <linux/linkage.h>
-#include <asm/assembler.h>
+ */
 
-ENTRY(arch_idle)
+#include <linux/init.h>
+#include <asm/system.h>
+
+static void msm_idle(void)
+{
 #ifdef CONFIG_MSM7X00A_IDLE
-	mrc     p15, 0, r1, c1, c0, 0    /* read current CR    */
-	bic     r0, r1, #(1 << 2)        /* clear dcache bit   */
-	bic     r0, r0, #(1 << 12)       /* clear icache bit   */
-	mcr     p15, 0, r0, c1, c0, 0    /* disable d/i cache  */
+	asm volatile (
+
+	"mrc     p15, 0, r1, c1, c0, 0    /* read current CR    */ \n\t"
+	"bic     r0, r1, #(1 << 2)        /* clear dcache bit   */ \n\t"
+	"bic     r0, r0, #(1 << 12)       /* clear icache bit   */ \n\t"
+	"mcr     p15, 0, r0, c1, c0, 0    /* disable d/i cache  */ \n\t"
+
+	"mov     r0, #0                   /* prepare wfi value  */ \n\t"
+	"mcr     p15, 0, r0, c7, c10, 0   /* flush the cache    */ \n\t"
+	"mcr     p15, 0, r0, c7, c10, 4   /* memory barrier     */ \n\t"
+	"mcr     p15, 0, r0, c7, c0, 4    /* wait for interrupt */ \n\t"
 
-	mov     r0, #0                   /* prepare wfi value  */
-	mcr     p15, 0, r0, c7, c10, 0   /* flush the cache    */
-	mcr     p15, 0, r0, c7, c10, 4   /* memory barrier     */
-	mcr     p15, 0, r0, c7, c0, 4    /* wait for interrupt */
+	"mcr     p15, 0, r1, c1, c0, 0    /* restore d/i cache  */ \n\t"
 
-	mcr     p15, 0, r1, c1, c0, 0    /* restore d/i cache  */
+	: : : "r0","r1" );
 #endif
-	mov     pc, lr
+}
+
+static int __init msm_idle_init(void)
+{
+	arm_pm_idle = msm_idle;
+	return 0;
+}
+
+arch_initcall(msm_idle_init);

arch/arm/mach-msm/include/mach/system.h

@@ -12,7 +12,6 @@
  * GNU General Public License for more details.
  *
  */
-void arch_idle(void);
 
 /* low level hardware reset hook -- for example, hitting the
  * PSHOLD line on the PMIC to hard reset the system

arch/arm/mach-msm/timer.c

@@ -24,6 +24,7 @@
 #include <asm/mach/time.h>
 #include <asm/hardware/gic.h>
 #include <asm/localtimer.h>
+#include <asm/sched_clock.h>
 
 #include <mach/msm_iomap.h>
 #include <mach/cpu.h>
@@ -105,12 +106,12 @@ static union {
 
 static void __iomem *source_base;
 
-static cycle_t msm_read_timer_count(struct clocksource *cs)
+static notrace cycle_t msm_read_timer_count(struct clocksource *cs)
 {
 	return readl_relaxed(source_base + TIMER_COUNT_VAL);
 }
 
-static cycle_t msm_read_timer_count_shift(struct clocksource *cs)
+static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs)
 {
 	/*
 	 * Shift timer count down by a constant due to unreliable lower bits
@@ -127,6 +128,11 @@ static struct clocksource msm_clocksource = {
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+static notrace u32 msm_sched_clock_read(void)
+{
+	return msm_clocksource.read(&msm_clocksource);
+}
+
 static void __init msm_timer_init(void)
 {
 	struct clock_event_device *ce = &msm_clockevent;
@@ -189,6 +195,8 @@ static void __init msm_timer_init(void)
 	res = clocksource_register_hz(cs, dgt_hz);
 	if (res)
 		pr_err("clocksource_register failed\n");
+	setup_sched_clock(msm_sched_clock_read,
+			cpu_is_msm7x01() ? 32 - MSM_DGT_SHIFT : 32, dgt_hz);
 }
 
 #ifdef CONFIG_LOCAL_TIMERS

arch/arm/mach-mv78xx0/include/mach/system.h

-/*
- * arch/arm/mach-mv78xx0/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-mx5/mm.c

@@ -26,23 +26,17 @@ static struct clk *gpc_dvfs_clk;
 
 static void imx5_idle(void)
 {
-	if (!need_resched()) {
-		/* gpc clock is needed for SRPG */
-		if (gpc_dvfs_clk == NULL) {
-			gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
-			if (IS_ERR(gpc_dvfs_clk))
-				goto err0;
-		}
-		clk_enable(gpc_dvfs_clk);
-		mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
-		if (tzic_enable_wake())
-			goto err1;
-		cpu_do_idle();
-err1:
-		clk_disable(gpc_dvfs_clk);
+	/* gpc clock is needed for SRPG */
+	if (gpc_dvfs_clk == NULL) {
+		gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+		if (IS_ERR(gpc_dvfs_clk))
+			return;
 	}
-err0:
-	local_irq_enable();
+	clk_enable(gpc_dvfs_clk);
+	mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+	if (tzic_enable_wake() != 0)
+		cpu_do_idle();
+	clk_disable(gpc_dvfs_clk);
 }
 
 /*
@@ -108,7 +102,7 @@ void __init imx51_init_early(void)
 	mxc_set_cpu_type(MXC_CPU_MX51);
 	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
-	pm_idle = imx5_idle;
+	arm_pm_idle = imx5_idle;
 }
 
 void __init imx53_init_early(void)

arch/arm/mach-mxs/devices.c

@@ -77,16 +77,18 @@ struct platform_device *__init mxs_add_platform_device_dmamask(
 
 int __init mxs_add_amba_device(const struct amba_device *dev)
 {
-	struct amba_device *adev = kmalloc(sizeof(*adev), GFP_KERNEL);
+	struct amba_device *adev = amba_device_alloc(dev->dev.init_name,
+		dev->res.start, resource_size(&dev->res));
 
 	if (!adev) {
 		pr_err("%s: failed to allocate memory", __func__);
 		return -ENOMEM;
 	}
 
-	*adev = *dev;
+	adev->irq[0] = dev->irq[0];
+	adev->irq[1] = dev->irq[1];
 
-	return amba_device_register(adev, &iomem_resource);
+	return amba_device_add(adev, &iomem_resource);
 }
 
 struct device mxs_apbh_bus = {

arch/arm/mach-mxs/devices/amba-duart.c

@@ -23,7 +23,7 @@ const struct amba_device name##_device __initconst = {		\
 		.end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1,	\
 		.flags = IORESOURCE_MEM,			\
 	},							\
-	.irq = {soc ## _INT_DUART, NO_IRQ},			\
+	.irq = {soc ## _INT_DUART},				\
 }
 
 #ifdef CONFIG_SOC_IMX23

arch/arm/mach-mxs/include/mach/system.h

-/*
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_MXS_SYSTEM_H__
-#define __MACH_MXS_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif /* __MACH_MXS_SYSTEM_H__ */

arch/arm/mach-mxs/pm.c

@@ -15,13 +15,12 @@
 #include <linux/kernel.h>
 #include <linux/suspend.h>
 #include <linux/io.h>
-#include <mach/system.h>
 
 static int mxs_suspend_enter(suspend_state_t state)
 {
 	switch (state) {
 	case PM_SUSPEND_MEM:
-		arch_idle();
+		cpu_do_idle();
 		break;
 
 	default:

arch/arm/mach-netx/fb.c

@@ -92,18 +92,7 @@ void clk_put(struct clk *clk)
 {
 }
 
-static struct amba_device fb_device = {
-	.dev		= {
-		.init_name = "fb",
-		.coherent_dma_mask = ~0,
-	},
-	.res		= {
-		.start	= 0x00104000,
-		.end	= 0x00104fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { NETX_IRQ_LCD, NO_IRQ },
-};
+static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL);
 
 int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel)
 {

arch/arm/mach-netx/include/mach/system.h

-/*
- * arch/arm/mach-netx/include/mach/system.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif
-

arch/arm/mach-nomadik/board-nhk8815.c

@@ -185,20 +185,11 @@ static void __init nhk8815_onenand_init(void)
 #endif
 }
 
-#define __MEM_4K_RESOURCE(x) \
-	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+static AMBA_APB_DEVICE(uart0, "uart0", 0, NOMADIK_UART0_BASE,
+	{ IRQ_UART0 }, NULL);
 
-static struct amba_device uart0_device = {
-	.dev = { .init_name = "uart0" },
-	__MEM_4K_RESOURCE(NOMADIK_UART0_BASE),
-	.irq = {IRQ_UART0, NO_IRQ},
-};
-
-static struct amba_device uart1_device = {
-	.dev = { .init_name = "uart1" },
-	__MEM_4K_RESOURCE(NOMADIK_UART1_BASE),
-	.irq = {IRQ_UART1, NO_IRQ},
-};
+static AMBA_APB_DEVICE(uart1, "uart1", 0, NOMADIK_UART1_BASE,
+	{ IRQ_UART1 }, NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&uart0_device,

arch/arm/mach-nomadik/cpu-8815.c

@@ -97,12 +97,7 @@ static struct platform_device cpu8815_platform_gpio[] = {
 	GPIO_DEVICE(3),
 };
 
-static struct amba_device cpu8815_amba_rng = {
-	.dev = {
-		.init_name = "rng",
-	},
-	__MEM_4K_RESOURCE(NOMADIK_RNG_BASE),
-};
+static AMBA_APB_DEVICE(cpu8815_amba_rng, "rng", 0, NOMADIK_RNG_BASE, { }, NULL);
 
 static struct platform_device *platform_devs[] __initdata = {
 	cpu8815_platform_gpio + 0,
@@ -112,7 +107,7 @@ static struct platform_device *platform_devs[] __initdata = {
 };
 
 static struct amba_device *amba_devs[] __initdata = {
-	&cpu8815_amba_rng
+	&cpu8815_amba_rng_device
 };
 
 static int __init cpu8815_init(void)

arch/arm/mach-nomadik/include/mach/system.h

-/*
- *  mach-nomadik/include/mach/system.h
- *
- *  Copyright (C) 2008 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-omap1/include/mach/system.h

-/*
- * arch/arm/mach-omap1/include/mach/system.h
- */
-
-#include <plat/system.h>

arch/arm/mach-omap1/pm.c

@@ -42,9 +42,9 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/atomic.h>
 
 #include <asm/irq.h>
-#include <linux/atomic.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
@@ -108,13 +108,7 @@ void omap1_pm_idle(void)
 	__u32 use_idlect1 = arm_idlect1_mask;
 	int do_sleep = 0;
 
-	local_irq_disable();
 	local_fiq_disable();
-	if (need_resched()) {
-		local_fiq_enable();
-		local_irq_enable();
-		return;
-	}
 
 #if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER)
 #warning Enable 32kHz OS timer in order to allow sleep states in idle
@@ -157,14 +151,12 @@ void omap1_pm_idle(void)
 		omap_writel(saved_idlect1, ARM_IDLECT1);
 
 		local_fiq_enable();
-		local_irq_enable();
 		return;
 	}
 	omap_sram_suspend(omap_readl(ARM_IDLECT1),
 			  omap_readl(ARM_IDLECT2));
 
 	local_fiq_enable();
-	local_irq_enable();
 }
 
 /*
@@ -583,8 +575,6 @@ static void omap_pm_init_proc(void)
 
 #endif /* DEBUG && CONFIG_PROC_FS */
 
-static void (*saved_idle)(void) = NULL;
-
 /*
  *	omap_pm_prepare - Do preliminary suspend work.
  *
@@ -592,8 +582,7 @@ static void (*saved_idle)(void) = NULL;
 static int omap_pm_prepare(void)
 {
 	/* We cannot sleep in idle until we have resumed */
-	saved_idle = pm_idle;
-	pm_idle = NULL;
+	disable_hlt();
 
 	return 0;
 }
@@ -630,7 +619,7 @@ static int omap_pm_enter(suspend_state_t state)
 
 static void omap_pm_finish(void)
 {
-	pm_idle = saved_idle;
+	enable_hlt();
 }
 
 
@@ -687,7 +676,7 @@ static int __init omap_pm_init(void)
 		return -ENODEV;
 	}
 
-	pm_idle = omap1_pm_idle;
+	arm_pm_idle = omap1_pm_idle;
 
 	if (cpu_is_omap7xx())
 		setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);

arch/arm/mach-omap2/emu.c

@@ -30,29 +30,8 @@ MODULE_AUTHOR("Alexander Shishkin");
 #define ETB_BASE	(L4_EMU_34XX_PHYS + 0x1b000)
 #define DAPCTL		(L4_EMU_34XX_PHYS + 0x1d000)
 
-static struct amba_device omap3_etb_device = {
-	.dev		= {
-		.init_name = "etb",
-	},
-	.res		= {
-		.start	= ETB_BASE,
-		.end	= ETB_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.periphid	= 0x000bb907,
-};
-
-static struct amba_device omap3_etm_device = {
-	.dev		= {
-		.init_name = "etm",
-	},
-	.res		= {
-		.start	= ETM_BASE,
-		.end	= ETM_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.periphid	= 0x102bb921,
-};
+static AMBA_APB_DEVICE(omap3_etb, "etb", 0x000bb907, ETB_BASE, { }, NULL);
+static AMBA_APB_DEVICE(omap3_etm, "etm", 0x102bb921, ETM_BASE, { }, NULL);
 
 static int __init emu_init(void)
 {
@@ -66,4 +45,3 @@ static int __init emu_init(void)
 }
 
 subsys_initcall(emu_init);
-

arch/arm/mach-omap2/include/mach/system.h

-/*
- * arch/arm/mach-omap2/include/mach/system.h
- */
-
-#include <plat/system.h>

arch/arm/mach-omap2/pm24xx.c

@@ -232,7 +232,6 @@ static int omap2_can_sleep(void)
 
 static void omap2_pm_idle(void)
 {
-	local_irq_disable();
 	local_fiq_disable();
 
 	if (!omap2_can_sleep()) {
@@ -249,7 +248,6 @@ static void omap2_pm_idle(void)
 
 out:
 	local_fiq_enable();
-	local_irq_enable();
 }
 
 #ifdef CONFIG_SUSPEND
@@ -468,7 +466,7 @@ static int __init omap2_pm_init(void)
 	}
 
 	suspend_set_ops(&omap_pm_ops);
-	pm_idle = omap2_pm_idle;
+	arm_pm_idle = omap2_pm_idle;
 
 	return 0;
 }

arch/arm/mach-omap2/pm34xx.c

@@ -418,10 +418,9 @@ void omap_sram_idle(void)
 
 static void omap3_pm_idle(void)
 {
-	local_irq_disable();
 	local_fiq_disable();
 
-	if (omap_irq_pending() || need_resched())
+	if (omap_irq_pending())
 		goto out;
 
 	trace_power_start(POWER_CSTATE, 1, smp_processor_id());
@@ -434,7 +433,6 @@ static void omap3_pm_idle(void)
 
 out:
 	local_fiq_enable();
-	local_irq_enable();
 }
 
 #ifdef CONFIG_SUSPEND
@@ -848,7 +846,7 @@ static int __init omap3_pm_init(void)
 	suspend_set_ops(&omap_pm_ops);
 #endif /* CONFIG_SUSPEND */
 
-	pm_idle = omap3_pm_idle;
+	arm_pm_idle = omap3_pm_idle;
 	omap3_idle_init();
 
 	/*

arch/arm/mach-omap2/pm44xx.c

@@ -173,18 +173,16 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
  * omap_default_idle - OMAP4 default ilde routine.'
  *
  * Implements OMAP4 memory, IO ordering requirements which can't be addressed
- * with default arch_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
+ * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
  * by secondary CPU with CONFIG_CPUIDLE.
  */
 static void omap_default_idle(void)
 {
-	local_irq_disable();
 	local_fiq_disable();
 
 	omap_do_wfi();
 
 	local_fiq_enable();
-	local_irq_enable();
 }
 
 /**
@@ -255,8 +253,8 @@ static int __init omap4_pm_init(void)
 	suspend_set_ops(&omap_pm_ops);
 #endif /* CONFIG_SUSPEND */
 
-	/* Overwrite the default arch_idle() */
-	pm_idle = omap_default_idle;
+	/* Overwrite the default cpu_do_idle() */
+	arm_pm_idle = omap_default_idle;
 
 	omap4_idle_init();
 

arch/arm/mach-omap2/prm_common.c

@@ -24,7 +24,6 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 
-#include <mach/system.h>
 #include <plat/common.h>
 #include <plat/prcm.h>
 #include <plat/irqs.h>

arch/arm/mach-orion5x/include/mach/system.h

-/*
- * arch/arm/mach-orion5x/include/mach/system.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-picoxcell/include/mach/irqs.h

-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_IRQS_H
-#define __MACH_IRQS_H
-
-/* We dynamically allocate our irq_desc's. */
-#define NR_IRQS				0
-
-#endif /* __MACH_IRQS_H */

arch/arm/mach-picoxcell/include/mach/system.h

-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching and wait for interrupt
-	 * tricks.
-	 */
-	cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */

arch/arm/mach-pnx4008/include/mach/system.h

-/*
- * arch/arm/mach-pnx4008/include/mach/system.h
- *
- * Copyright (C) 2003 Philips Semiconductors
- * Copyright (C) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-prima2/include/mach/system.h

-/*
- * arch/arm/mach-prima2/include/mach/system.h
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_SYSTEM_H__
-#define __MACH_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-prima2/timer.c

@@ -18,6 +18,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <mach/map.h>
+#include <asm/sched_clock.h>
 #include <asm/mach/time.h>
 
 #define SIRFSOC_TIMER_COUNTER_LO	0x0000
@@ -165,21 +166,9 @@ static struct irqaction sirfsoc_timer_irq = {
 };
 
 /* Overwrite weak default sched_clock with more precise one */
-unsigned long long notrace sched_clock(void)
+static u32 notrace sirfsoc_read_sched_clock(void)
 {
-	static int is_mapped;
-
-	/*
-	 * sched_clock is called earlier than .init of sys_timer
-	 * if we map timer memory in .init of sys_timer, system
-	 * will panic due to illegal memory access
-	 */
-	if (!is_mapped) {
-		sirfsoc_of_timer_map();
-		is_mapped = 1;
-	}
-
-	return sirfsoc_timer_read(NULL) * (NSEC_PER_SEC / CLOCK_TICK_RATE);
+	return (u32)(sirfsoc_timer_read(NULL) & 0xffffffff);
 }
 
 static void __init sirfsoc_clockevent_init(void)
@@ -210,6 +199,8 @@ static void __init sirfsoc_timer_init(void)
 	BUG_ON(rate < CLOCK_TICK_RATE);
 	BUG_ON(rate % CLOCK_TICK_RATE);
 
+	sirfsoc_of_timer_map();
+
 	writel_relaxed(rate / CLOCK_TICK_RATE / 2 - 1, sirfsoc_timer_base + SIRFSOC_TIMER_DIV);
 	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO);
 	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
@@ -217,6 +208,8 @@ static void __init sirfsoc_timer_init(void)
 
 	BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
 
+	setup_sched_clock(sirfsoc_read_sched_clock, 32, CLOCK_TICK_RATE);
+
 	BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq));
 
 	sirfsoc_clockevent_init();

arch/arm/mach-pxa/capc7117.c

@@ -150,6 +150,7 @@ MACHINE_START(CAPC7117,
 	      "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
 	.atag_offset = 0x100,
 	.map_io = pxa3xx_map_io,
+	.nr_irqs = PXA_NR_IRQS,
 	.init_irq = pxa3xx_init_irq,
 	.handle_irq = pxa3xx_handle_irq,
 	.timer = &pxa_timer,

arch/arm/mach-pxa/cm-x300.c

@@ -853,6 +853,7 @@ static void __init cm_x300_fixup(struct tag *tags, char **cmdline,
 MACHINE_START(CM_X300, "CM-X300 module")
 	.atag_offset	= 0x100,
 	.map_io		= pxa3xx_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,

arch/arm/mach-pxa/colibri-pxa270.c

@@ -310,6 +310,7 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
 	.atag_offset	= 0x100,
 	.init_machine	= colibri_pxa270_init,
 	.map_io		= pxa27x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
@@ -320,6 +321,7 @@ MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
 	.atag_offset	= 0x100,
 	.init_machine	= colibri_pxa270_income_init,
 	.map_io		= pxa27x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,

arch/arm/mach-pxa/colibri-pxa300.c

@@ -186,6 +186,7 @@ MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
 	.atag_offset	= 0x100,
 	.init_machine	= colibri_pxa300_init,
 	.map_io		= pxa3xx_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,

arch/arm/mach-pxa/colibri-pxa320.c

@@ -256,6 +256,7 @@ MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
 	.atag_offset	= 0x100,
 	.init_machine	= colibri_pxa320_init,
 	.map_io		= pxa3xx_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,

arch/arm/mach-pxa/corgi.c

@@ -730,6 +730,7 @@ static void __init fixup_corgi(struct tag *tags, char **cmdline,
 MACHINE_START(CORGI, "SHARP Corgi")
 	.fixup		= fixup_corgi,
 	.map_io		= pxa25x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.init_machine	= corgi_init,
@@ -742,6 +743,7 @@ MACHINE_END
 MACHINE_START(SHEPHERD, "SHARP Shepherd")
 	.fixup		= fixup_corgi,
 	.map_io		= pxa25x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.init_machine	= corgi_init,
@@ -754,6 +756,7 @@ MACHINE_END
 MACHINE_START(HUSKY, "SHARP Husky")
 	.fixup		= fixup_corgi,
 	.map_io		= pxa25x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.init_machine	= corgi_init,

arch/arm/mach-pxa/csb726.c

@@ -274,6 +274,7 @@ static void __init csb726_init(void)
 MACHINE_START(CSB726, "Cogent CSB726")
 	.atag_offset	= 0x100,
 	.map_io         = pxa27x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.handle_irq       = pxa27x_handle_irq,
 	.init_machine   = csb726_init,

arch/arm/mach-pxa/devices.c

@@ -12,6 +12,7 @@
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
+#include <mach/irqs.h>
 #include <mach/ohci.h>
 #include <plat/pxa27x_keypad.h>
 #include <mach/camera.h>

arch/arm/mach-pxa/em-x270.c

@@ -1301,6 +1301,7 @@ static void __init em_x270_init(void)
 MACHINE_START(EM_X270, "Compulab EM-X270")
 	.atag_offset	= 0x100,
 	.map_io		= pxa27x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
@@ -1311,6 +1312,7 @@ MACHINE_END
 MACHINE_START(EXEDA, "Compulab eXeda")
 	.atag_offset	= 0x100,
 	.map_io		= pxa27x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,

arch/arm/mach-pxa/gumstix.c

@@ -235,6 +235,7 @@ static void __init gumstix_init(void)
 MACHINE_START(GUMSTIX, "Gumstix")
 	.atag_offset	= 0x100, /* match u-boot bi_boot_params */
 	.map_io		= pxa25x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,

arch/arm/mach-pxa/h5000.c

@@ -205,6 +205,7 @@ static void __init h5000_init(void)
 MACHINE_START(H5400, "HP iPAQ H5000")
 	.atag_offset = 0x100,
 	.map_io = pxa25x_map_io,
+	.nr_irqs = PXA_NR_IRQS,
 	.init_irq = pxa25x_init_irq,
 	.handle_irq = pxa25x_handle_irq,
 	.timer = &pxa_timer,

arch/arm/mach-pxa/himalaya.c

@@ -160,6 +160,7 @@ static void __init himalaya_init(void)
 MACHINE_START(HIMALAYA, "HTC Himalaya")
 	.atag_offset = 0x100,
 	.map_io = pxa25x_map_io,
+	.nr_irqs = PXA_NR_IRQS,
 	.init_irq = pxa25x_init_irq,
 	.handle_irq = pxa25x_handle_irq,
 	.init_machine = himalaya_init,

arch/arm/mach-pxa/icontrol.c

@@ -193,6 +193,7 @@ static void __init icontrol_init(void)
 MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
 	.atag_offset	= 0x100,
 	.map_io		= pxa3xx_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,

arch/arm/mach-pxa/idp.c

@@ -195,6 +195,7 @@ static void __init idp_map_io(void)
 MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
 	/* Maintainer: Vibren Technologies */
 	.map_io		= idp_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,

arch/arm/mach-pxa/include/mach/irqs.h

@@ -100,7 +100,7 @@
  */
 #define IRQ_BOARD_START		(PXA_GPIO_IRQ_BASE + PXA_NR_BUILTIN_GPIO)
 
-#define NR_IRQS			(IRQ_BOARD_START)
+#define PXA_NR_IRQS		(IRQ_BOARD_START)
 
 #ifndef __ASSEMBLY__
 struct irq_data;

arch/arm/mach-pxa/include/mach/mainstone.h

@@ -13,6 +13,8 @@
 #ifndef ASM_ARCH_MAINSTONE_H
 #define ASM_ARCH_MAINSTONE_H
 
+#include <mach/irqs.h>
+
 #define MST_ETH_PHYS		PXA_CS4_PHYS
 
 #define MST_FPGA_PHYS		PXA_CS2_PHYS

arch/arm/mach-pxa/include/mach/system.h

-/*
- * arch/arm/mach-pxa/include/mach/system.h
- *
- * Author:	Nicolas Pitre
- * Created:	Jun 15, 2001
- * Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}

arch/arm/mach-pxa/mioa701.c

@@ -758,6 +758,7 @@ MACHINE_START(MIOA701, "MIO A701")
 	.atag_offset	= 0x100,
 	.restart_mode	= 's',
 	.map_io		= &pxa27x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= &pxa27x_init_irq,
 	.handle_irq	= &pxa27x_handle_irq,
 	.init_machine	= mioa701_machine_init,

arch/arm/mach-pxa/mp900.c

@@ -95,6 +95,7 @@ MACHINE_START(NEC_MP900, "MobilePro900/C")
 	.atag_offset	= 0x220100,
 	.timer		= &pxa_timer,
 	.map_io		= pxa25x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.init_machine	= mp900c_init,

arch/arm/mach-pxa/palmld.c

@@ -344,6 +344,7 @@ static void __init palmld_init(void)
 MACHINE_START(PALMLD, "Palm LifeDrive")
 	.atag_offset	= 0x100,
 	.map_io		= palmld_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,

arch/arm/mach-pxa/palmt5.c

@@ -205,6 +205,7 @@ MACHINE_START(PALMT5, "Palm Tungsten|T5")
 	.atag_offset	= 0x100,
 	.map_io		= pxa27x_map_io,
 	.reserve	= palmt5_reserve,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,

arch/arm/mach-pxa/palmtc.c

@@ -539,6 +539,7 @@ static void __init palmtc_init(void)
 MACHINE_START(PALMTC, "Palm Tungsten|C")
 	.atag_offset 	= 0x100,
 	.map_io		= pxa25x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,

arch/arm/mach-pxa/palmte2.c

@@ -358,6 +358,7 @@ static void __init palmte2_init(void)
 MACHINE_START(PALMTE2, "Palm Tungsten|E2")
 	.atag_offset	= 0x100,
 	.map_io		= pxa25x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,

arch/arm/mach-pxa/palmtreo.c

@@ -448,6 +448,7 @@ MACHINE_START(TREO680, "Palm Treo 680")
 	.atag_offset    = 0x100,
 	.map_io         = pxa27x_map_io,
 	.reserve	= treo_reserve,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
@@ -461,6 +462,7 @@ MACHINE_START(CENTRO, "Palm Centro 685")
 	.atag_offset    = 0x100,
 	.map_io         = pxa27x_map_io,
 	.reserve	= treo_reserve,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,

arch/arm/mach-pxa/palmtx.c

@@ -366,6 +366,7 @@ static void __init palmtx_init(void)
 MACHINE_START(PALMTX, "Palm T|X")
 	.atag_offset	= 0x100,
 	.map_io		= palmtx_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,

arch/arm/mach-pxa/palmz72.c

@@ -401,6 +401,7 @@ static void __init palmz72_init(void)
 MACHINE_START(PALMZ72, "Palm Zire72")
 	.atag_offset	= 0x100,
 	.map_io		= pxa27x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,

arch/arm/mach-pxa/pxa3xx.c

@@ -31,6 +31,7 @@
 #include <mach/pm.h>
 #include <mach/dma.h>
 #include <mach/smemc.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 #include "devices.h"

arch/arm/mach-pxa/raumfeld.c

@@ -1090,6 +1090,7 @@ MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
 	.atag_offset	= 0x100,
 	.init_machine	= raumfeld_controller_init,
 	.map_io		= pxa3xx_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
@@ -1102,6 +1103,7 @@ MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
 	.atag_offset	= 0x100,
 	.init_machine	= raumfeld_connector_init,
 	.map_io		= pxa3xx_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
@@ -1114,6 +1116,7 @@ MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
 	.atag_offset	= 0x100,
 	.init_machine	= raumfeld_speaker_init,
 	.map_io		= pxa3xx_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,

arch/arm/mach-pxa/saar.c

@@ -598,6 +598,7 @@ MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
 	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
 	.atag_offset    = 0x100,
 	.map_io         = pxa3xx_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq       = pxa3xx_init_irq,
 	.handle_irq       = pxa3xx_handle_irq,
 	.timer          = &pxa_timer,

arch/arm/mach-pxa/spitz.c

@@ -984,6 +984,7 @@ MACHINE_START(SPITZ, "SHARP Spitz")
 	.restart_mode	= 'g',
 	.fixup		= spitz_fixup,
 	.map_io		= pxa27x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.init_machine	= spitz_init,
@@ -997,6 +998,7 @@ MACHINE_START(BORZOI, "SHARP Borzoi")
 	.restart_mode	= 'g',
 	.fixup		= spitz_fixup,
 	.map_io		= pxa27x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.init_machine	= spitz_init,
@@ -1010,6 +1012,7 @@ MACHINE_START(AKITA, "SHARP Akita")
 	.restart_mode	= 'g',
 	.fixup		= spitz_fixup,
 	.map_io		= pxa27x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.init_machine	= spitz_init,

arch/arm/mach-pxa/stargate2.c

@@ -1006,6 +1006,7 @@ static void __init stargate2_init(void)
 #ifdef CONFIG_MACH_INTELMOTE2
 MACHINE_START(INTELMOTE2, "IMOTE 2")
 	.map_io		= pxa27x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,

arch/arm/mach-pxa/tavorevb.c

@@ -491,6 +491,7 @@ MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
 	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
 	.atag_offset    = 0x100,
 	.map_io         = pxa3xx_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq       = pxa3xx_init_irq,
 	.handle_irq       = pxa3xx_handle_irq,
 	.timer          = &pxa_timer,

arch/arm/mach-pxa/time.c

@@ -22,6 +22,7 @@
 #include <asm/mach/time.h>
 #include <asm/sched_clock.h>
 #include <mach/regs-ost.h>
+#include <mach/irqs.h>
 
 /*
  * This is PXA's sched_clock implementation. This has a resolution

arch/arm/mach-pxa/trizeps4.c

@@ -558,6 +558,7 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
 	.atag_offset	= 0x100,
 	.init_machine	= trizeps4_init,
 	.map_io		= trizeps4_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
@@ -569,6 +570,7 @@ MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
 	.atag_offset	= 0x100,
 	.init_machine	= trizeps4_init,
 	.map_io		= trizeps4_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,

arch/arm/mach-pxa/viper.c

@@ -994,6 +994,7 @@ MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
 	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
 	.atag_offset	= 0x100,
 	.map_io		= viper_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= viper_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.timer          = &pxa_timer,

arch/arm/mach-pxa/vpac270.c

@@ -718,6 +718,7 @@ static void __init vpac270_init(void)
 MACHINE_START(VPAC270, "Voipac PXA270")
 	.atag_offset	= 0x100,
 	.map_io		= pxa27x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,

arch/arm/mach-pxa/xcep.c

@@ -182,6 +182,7 @@ MACHINE_START(XCEP, "Iskratel XCEP")
 	.atag_offset	= 0x100,
 	.init_machine	= xcep_init,
 	.map_io		= pxa25x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,

arch/arm/mach-pxa/z2.c

@@ -721,6 +721,7 @@ static void __init z2_init(void)
 MACHINE_START(ZIPIT2, "Zipit Z2")
 	.atag_offset	= 0x100,
 	.map_io		= pxa27x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,

arch/arm/mach-realview/core.h

@@ -28,21 +28,11 @@
 #include <asm/setup.h>
 #include <asm/leds.h>
 
-#define AMBA_DEVICE(name,busid,base,plat)			\
-static struct amba_device name##_device = {			\
-	.dev		= {					\
-		.coherent_dma_mask = ~0,			\
-		.init_name = busid,				\
-		.platform_data = plat,				\
-	},							\
-	.res		= {					\
-		.start	= REALVIEW_##base##_BASE,		\
-		.end	= (REALVIEW_##base##_BASE) + SZ_4K - 1,	\
-		.flags	= IORESOURCE_MEM,			\
-	},							\
-	.dma_mask	= ~0,					\
-	.irq		= base##_IRQ,				\
-}
+#define APB_DEVICE(name, busid, base, plat)			\
+static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
+
+#define AHB_DEVICE(name, busid, base, plat)			\
+static AMBA_AHB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
 
 struct machine_desc;
 

arch/arm/mach-realview/include/mach/irqs-pb1176.h

@@ -40,6 +40,7 @@
 #define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
 #define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
 #define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
+#define IRQ_DC1176_GPIO0	(IRQ_DC1176_GIC_START + 16)
 #define IRQ_DC1176_SSP		(IRQ_DC1176_GIC_START + 17)	/* SSP port */
 #define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
 #define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
@@ -73,7 +74,6 @@
 #define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
 #define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
 
-#define IRQ_PB1176_GPIO0	-1
 #define IRQ_PB1176_SCTL		-1
 
 #define NR_GIC_PB1176		2

arch/arm/mach-realview/include/mach/system.h

-/*
- *  arch/arm/mach-realview/include/mach/system.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-realview/realview_eb.c

@@ -140,63 +140,63 @@ static struct pl022_ssp_controller ssp0_plat_data = {
 /*
  * These devices are connected via the core APB bridge
  */
-#define GPIO2_IRQ	{ IRQ_EB_GPIO2, NO_IRQ }
-#define GPIO3_IRQ	{ IRQ_EB_GPIO3, NO_IRQ }
+#define GPIO2_IRQ	{ IRQ_EB_GPIO2 }
+#define GPIO3_IRQ	{ IRQ_EB_GPIO3 }
 
-#define AACI_IRQ	{ IRQ_EB_AACI, NO_IRQ }
+#define AACI_IRQ	{ IRQ_EB_AACI }
 #define MMCI0_IRQ	{ IRQ_EB_MMCI0A, IRQ_EB_MMCI0B }
-#define KMI0_IRQ	{ IRQ_EB_KMI0, NO_IRQ }
-#define KMI1_IRQ	{ IRQ_EB_KMI1, NO_IRQ }
+#define KMI0_IRQ	{ IRQ_EB_KMI0 }
+#define KMI1_IRQ	{ IRQ_EB_KMI1 }
 
 /*
  * These devices are connected directly to the multi-layer AHB switch
  */
-#define EB_SMC_IRQ	{ NO_IRQ, NO_IRQ }
-#define MPMC_IRQ	{ NO_IRQ, NO_IRQ }
-#define EB_CLCD_IRQ	{ IRQ_EB_CLCD, NO_IRQ }
-#define DMAC_IRQ	{ IRQ_EB_DMA, NO_IRQ }
+#define EB_SMC_IRQ	{ }
+#define MPMC_IRQ	{ }
+#define EB_CLCD_IRQ	{ IRQ_EB_CLCD }
+#define DMAC_IRQ	{ IRQ_EB_DMA }
 
 /*
  * These devices are connected via the core APB bridge
  */
-#define SCTL_IRQ	{ NO_IRQ, NO_IRQ }
-#define EB_WATCHDOG_IRQ	{ IRQ_EB_WDOG, NO_IRQ }
-#define EB_GPIO0_IRQ	{ IRQ_EB_GPIO0, NO_IRQ }
-#define GPIO1_IRQ	{ IRQ_EB_GPIO1, NO_IRQ }
-#define EB_RTC_IRQ	{ IRQ_EB_RTC, NO_IRQ }
+#define SCTL_IRQ	{ }
+#define EB_WATCHDOG_IRQ	{ IRQ_EB_WDOG }
+#define EB_GPIO0_IRQ	{ IRQ_EB_GPIO0 }
+#define GPIO1_IRQ	{ IRQ_EB_GPIO1 }
+#define EB_RTC_IRQ	{ IRQ_EB_RTC }
 
 /*
  * These devices are connected via the DMA APB bridge
  */
-#define SCI_IRQ		{ IRQ_EB_SCI, NO_IRQ }
-#define EB_UART0_IRQ	{ IRQ_EB_UART0, NO_IRQ }
-#define EB_UART1_IRQ	{ IRQ_EB_UART1, NO_IRQ }
-#define EB_UART2_IRQ	{ IRQ_EB_UART2, NO_IRQ }
-#define EB_UART3_IRQ	{ IRQ_EB_UART3, NO_IRQ }
-#define EB_SSP_IRQ	{ IRQ_EB_SSP, NO_IRQ }
+#define SCI_IRQ		{ IRQ_EB_SCI }
+#define EB_UART0_IRQ	{ IRQ_EB_UART0 }
+#define EB_UART1_IRQ	{ IRQ_EB_UART1 }
+#define EB_UART2_IRQ	{ IRQ_EB_UART2 }
+#define EB_UART3_IRQ	{ IRQ_EB_UART3 }
+#define EB_SSP_IRQ	{ IRQ_EB_SSP }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,  "fpga:aaci",  AACI,     NULL);
-AMBA_DEVICE(mmc0,  "fpga:mmc0",  MMCI0,    &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,  "fpga:kmi0",  KMI0,     NULL);
-AMBA_DEVICE(kmi1,  "fpga:kmi1",  KMI1,     NULL);
-AMBA_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
+APB_DEVICE(aaci,  "fpga:aaci",  AACI,     NULL);
+APB_DEVICE(mmc0,  "fpga:mmc0",  MMCI0,    &realview_mmc0_plat_data);
+APB_DEVICE(kmi0,  "fpga:kmi0",  KMI0,     NULL);
+APB_DEVICE(kmi1,  "fpga:kmi1",  KMI1,     NULL);
+APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,   "dev:smc",   EB_SMC,   NULL);
-AMBA_DEVICE(clcd,  "dev:clcd",  EB_CLCD,  &clcd_plat_data);
-AMBA_DEVICE(dmac,  "dev:dmac",  DMAC,     NULL);
-AMBA_DEVICE(sctl,  "dev:sctl",  SCTL,     NULL);
-AMBA_DEVICE(wdog,  "dev:wdog",  EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1,    &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2,    &gpio2_plat_data);
-AMBA_DEVICE(rtc,   "dev:rtc",   EB_RTC,   NULL);
-AMBA_DEVICE(sci0,  "dev:sci0",  SCI,      NULL);
-AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
-AMBA_DEVICE(ssp0,  "dev:ssp0",  EB_SSP,   &ssp0_plat_data);
+AHB_DEVICE(smc,   "dev:smc",   EB_SMC,   NULL);
+AHB_DEVICE(clcd,  "dev:clcd",  EB_CLCD,  &clcd_plat_data);
+AHB_DEVICE(dmac,  "dev:dmac",  DMAC,     NULL);
+AHB_DEVICE(sctl,  "dev:sctl",  SCTL,     NULL);
+APB_DEVICE(wdog,  "dev:wdog",  EB_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1,    &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2,    &gpio2_plat_data);
+APB_DEVICE(rtc,   "dev:rtc",   EB_RTC,   NULL);
+APB_DEVICE(sci0,  "dev:sci0",  SCI,      NULL);
+APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
+APB_DEVICE(ssp0,  "dev:ssp0",  EB_SSP,   &ssp0_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,

arch/arm/mach-realview/realview_pb1176.c

@@ -132,50 +132,50 @@ static struct pl022_ssp_controller ssp0_plat_data = {
 /*
  * RealView PB1176 AMBA devices
  */
-#define GPIO2_IRQ	{ IRQ_PB1176_GPIO2, NO_IRQ }
-#define GPIO3_IRQ	{ IRQ_PB1176_GPIO3, NO_IRQ }
-#define AACI_IRQ	{ IRQ_PB1176_AACI, NO_IRQ }
+#define GPIO2_IRQ	{ IRQ_PB1176_GPIO2 }
+#define GPIO3_IRQ	{ IRQ_PB1176_GPIO3 }
+#define AACI_IRQ	{ IRQ_PB1176_AACI }
 #define MMCI0_IRQ	{ IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B }
-#define KMI0_IRQ	{ IRQ_PB1176_KMI0, NO_IRQ }
-#define KMI1_IRQ	{ IRQ_PB1176_KMI1, NO_IRQ }
-#define PB1176_SMC_IRQ	{ NO_IRQ, NO_IRQ }
-#define MPMC_IRQ	{ NO_IRQ, NO_IRQ }
-#define PB1176_CLCD_IRQ	{ IRQ_DC1176_CLCD, NO_IRQ }
-#define SCTL_IRQ	{ NO_IRQ, NO_IRQ }
-#define PB1176_WATCHDOG_IRQ	{ IRQ_DC1176_WATCHDOG, NO_IRQ }
-#define PB1176_GPIO0_IRQ	{ IRQ_PB1176_GPIO0, NO_IRQ }
-#define GPIO1_IRQ	{ IRQ_PB1176_GPIO1, NO_IRQ }
-#define PB1176_RTC_IRQ	{ IRQ_DC1176_RTC, NO_IRQ }
-#define SCI_IRQ		{ IRQ_PB1176_SCI, NO_IRQ }
-#define PB1176_UART0_IRQ	{ IRQ_DC1176_UART0, NO_IRQ }
-#define PB1176_UART1_IRQ	{ IRQ_DC1176_UART1, NO_IRQ }
-#define PB1176_UART2_IRQ	{ IRQ_DC1176_UART2, NO_IRQ }
-#define PB1176_UART3_IRQ	{ IRQ_DC1176_UART3, NO_IRQ }
-#define PB1176_UART4_IRQ	{ IRQ_PB1176_UART4, NO_IRQ }
-#define PB1176_SSP_IRQ		{ IRQ_DC1176_SSP, NO_IRQ }
+#define KMI0_IRQ	{ IRQ_PB1176_KMI0 }
+#define KMI1_IRQ	{ IRQ_PB1176_KMI1 }
+#define PB1176_SMC_IRQ	{ }
+#define MPMC_IRQ	{ }
+#define PB1176_CLCD_IRQ	{ IRQ_DC1176_CLCD }
+#define SCTL_IRQ	{ }
+#define PB1176_WATCHDOG_IRQ	{ IRQ_DC1176_WATCHDOG }
+#define PB1176_GPIO0_IRQ	{ IRQ_DC1176_GPIO0 }
+#define GPIO1_IRQ	{ IRQ_PB1176_GPIO1 }
+#define PB1176_RTC_IRQ	{ IRQ_DC1176_RTC }
+#define SCI_IRQ		{ IRQ_PB1176_SCI }
+#define PB1176_UART0_IRQ	{ IRQ_DC1176_UART0 }
+#define PB1176_UART1_IRQ	{ IRQ_DC1176_UART1 }
+#define PB1176_UART2_IRQ	{ IRQ_DC1176_UART2 }
+#define PB1176_UART3_IRQ	{ IRQ_DC1176_UART3 }
+#define PB1176_UART4_IRQ	{ IRQ_PB1176_UART4 }
+#define PB1176_SSP_IRQ		{ IRQ_DC1176_SSP }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-AMBA_DEVICE(uart4,	"fpga:uart4",	PB1176_UART4,	NULL);
+APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+APB_DEVICE(uart4,	"fpga:uart4",	PB1176_UART4,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:smc",	PB1176_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:wdog",	PB1176_WATCHDOG,	NULL);
-AMBA_DEVICE(gpio0,	"dev:gpio0",	PB1176_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:rtc",	PB1176_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:uart0",	PB1176_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:uart1",	PB1176_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:uart2",	PB1176_UART2,	NULL);
-AMBA_DEVICE(uart3,	"dev:uart3",	PB1176_UART3,	NULL);
-AMBA_DEVICE(ssp0,	"dev:ssp0",	PB1176_SSP,	&ssp0_plat_data);
-AMBA_DEVICE(clcd,	"dev:clcd",	PB1176_CLCD,	&clcd_plat_data);
+AHB_DEVICE(smc,		"dev:smc",	PB1176_SMC,	NULL);
+AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+APB_DEVICE(wdog,	"dev:wdog",	PB1176_WATCHDOG,	NULL);
+APB_DEVICE(gpio0,	"dev:gpio0",	PB1176_GPIO0,	&gpio0_plat_data);
+APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+APB_DEVICE(rtc,		"dev:rtc",	PB1176_RTC,	NULL);
+APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+APB_DEVICE(uart0,	"dev:uart0",	PB1176_UART0,	NULL);
+APB_DEVICE(uart1,	"dev:uart1",	PB1176_UART1,	NULL);
+APB_DEVICE(uart2,	"dev:uart2",	PB1176_UART2,	NULL);
+APB_DEVICE(uart3,	"dev:uart3",	PB1176_UART3,	NULL);
+APB_DEVICE(ssp0,	"dev:ssp0",	PB1176_SSP,	&ssp0_plat_data);
+AHB_DEVICE(clcd,	"dev:clcd",	PB1176_CLCD,	&clcd_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&uart0_device,

arch/arm/mach-realview/realview_pb11mp.c

@@ -132,52 +132,52 @@ static struct pl022_ssp_controller ssp0_plat_data = {
  * RealView PB11MPCore AMBA devices
  */
 
-#define GPIO2_IRQ		{ IRQ_PB11MP_GPIO2, NO_IRQ }
-#define GPIO3_IRQ		{ IRQ_PB11MP_GPIO3, NO_IRQ }
-#define AACI_IRQ		{ IRQ_TC11MP_AACI, NO_IRQ }
+#define GPIO2_IRQ		{ IRQ_PB11MP_GPIO2 }
+#define GPIO3_IRQ		{ IRQ_PB11MP_GPIO3 }
+#define AACI_IRQ		{ IRQ_TC11MP_AACI }
 #define MMCI0_IRQ		{ IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B }
-#define KMI0_IRQ		{ IRQ_TC11MP_KMI0, NO_IRQ }
-#define KMI1_IRQ		{ IRQ_TC11MP_KMI1, NO_IRQ }
-#define PB11MP_SMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define MPMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define PB11MP_CLCD_IRQ		{ IRQ_PB11MP_CLCD, NO_IRQ }
-#define DMAC_IRQ		{ IRQ_PB11MP_DMAC, NO_IRQ }
-#define SCTL_IRQ		{ NO_IRQ, NO_IRQ }
-#define PB11MP_WATCHDOG_IRQ	{ IRQ_PB11MP_WATCHDOG, NO_IRQ }
-#define PB11MP_GPIO0_IRQ	{ IRQ_PB11MP_GPIO0, NO_IRQ }
-#define GPIO1_IRQ		{ IRQ_PB11MP_GPIO1, NO_IRQ }
-#define PB11MP_RTC_IRQ		{ IRQ_TC11MP_RTC, NO_IRQ }
-#define SCI_IRQ			{ IRQ_PB11MP_SCI, NO_IRQ }
-#define PB11MP_UART0_IRQ	{ IRQ_TC11MP_UART0, NO_IRQ }
-#define PB11MP_UART1_IRQ	{ IRQ_TC11MP_UART1, NO_IRQ }
-#define PB11MP_UART2_IRQ	{ IRQ_PB11MP_UART2, NO_IRQ }
-#define PB11MP_UART3_IRQ	{ IRQ_PB11MP_UART3, NO_IRQ }
-#define PB11MP_SSP_IRQ		{ IRQ_PB11MP_SSP, NO_IRQ }
+#define KMI0_IRQ		{ IRQ_TC11MP_KMI0 }
+#define KMI1_IRQ		{ IRQ_TC11MP_KMI1 }
+#define PB11MP_SMC_IRQ		{ }
+#define MPMC_IRQ		{ }
+#define PB11MP_CLCD_IRQ		{ IRQ_PB11MP_CLCD }
+#define DMAC_IRQ		{ IRQ_PB11MP_DMAC }
+#define SCTL_IRQ		{ }
+#define PB11MP_WATCHDOG_IRQ	{ IRQ_PB11MP_WATCHDOG }
+#define PB11MP_GPIO0_IRQ	{ IRQ_PB11MP_GPIO0 }
+#define GPIO1_IRQ		{ IRQ_PB11MP_GPIO1 }
+#define PB11MP_RTC_IRQ		{ IRQ_TC11MP_RTC }
+#define SCI_IRQ			{ IRQ_PB11MP_SCI }
+#define PB11MP_UART0_IRQ	{ IRQ_TC11MP_UART0 }
+#define PB11MP_UART1_IRQ	{ IRQ_TC11MP_UART1 }
+#define PB11MP_UART2_IRQ	{ IRQ_PB11MP_UART2 }
+#define PB11MP_UART3_IRQ	{ IRQ_PB11MP_UART3 }
+#define PB11MP_SSP_IRQ		{ IRQ_PB11MP_SSP }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:uart3",	PB11MP_UART3,	NULL);
+APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+APB_DEVICE(uart3,	"fpga:uart3",	PB11MP_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:smc",	PB11MP_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:wdog",	PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:gpio0",	PB11MP_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:rtc",	PB11MP_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:uart0",	PB11MP_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:uart1",	PB11MP_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:uart2",	PB11MP_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:ssp0",	PB11MP_SSP,	&ssp0_plat_data);
+AHB_DEVICE(smc,		"dev:smc",	PB11MP_SMC,	NULL);
+AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+APB_DEVICE(wdog,	"dev:wdog",	PB11MP_WATCHDOG, NULL);
+APB_DEVICE(gpio0,	"dev:gpio0",	PB11MP_GPIO0,	&gpio0_plat_data);
+APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+APB_DEVICE(rtc,		"dev:rtc",	PB11MP_RTC,	NULL);
+APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+APB_DEVICE(uart0,	"dev:uart0",	PB11MP_UART0,	NULL);
+APB_DEVICE(uart1,	"dev:uart1",	PB11MP_UART1,	NULL);
+APB_DEVICE(uart2,	"dev:uart2",	PB11MP_UART2,	NULL);
+APB_DEVICE(ssp0,	"dev:ssp0",	PB11MP_SSP,	&ssp0_plat_data);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:clcd",	PB11MP_CLCD,	&clcd_plat_data);
-AMBA_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
+AHB_DEVICE(clcd,	"issp:clcd",	PB11MP_CLCD,	&clcd_plat_data);
+AHB_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,

arch/arm/mach-realview/realview_pba8.c

@@ -122,52 +122,52 @@ static struct pl022_ssp_controller ssp0_plat_data = {
  * RealView PBA8Core AMBA devices
  */
 
-#define GPIO2_IRQ		{ IRQ_PBA8_GPIO2, NO_IRQ }
-#define GPIO3_IRQ		{ IRQ_PBA8_GPIO3, NO_IRQ }
-#define AACI_IRQ		{ IRQ_PBA8_AACI, NO_IRQ }
+#define GPIO2_IRQ		{ IRQ_PBA8_GPIO2 }
+#define GPIO3_IRQ		{ IRQ_PBA8_GPIO3 }
+#define AACI_IRQ		{ IRQ_PBA8_AACI }
 #define MMCI0_IRQ		{ IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B }
-#define KMI0_IRQ		{ IRQ_PBA8_KMI0, NO_IRQ }
-#define KMI1_IRQ		{ IRQ_PBA8_KMI1, NO_IRQ }
-#define PBA8_SMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define MPMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define PBA8_CLCD_IRQ		{ IRQ_PBA8_CLCD, NO_IRQ }
-#define DMAC_IRQ		{ IRQ_PBA8_DMAC, NO_IRQ }
-#define SCTL_IRQ		{ NO_IRQ, NO_IRQ }
-#define PBA8_WATCHDOG_IRQ	{ IRQ_PBA8_WATCHDOG, NO_IRQ }
-#define PBA8_GPIO0_IRQ		{ IRQ_PBA8_GPIO0, NO_IRQ }
-#define GPIO1_IRQ		{ IRQ_PBA8_GPIO1, NO_IRQ }
-#define PBA8_RTC_IRQ		{ IRQ_PBA8_RTC, NO_IRQ }
-#define SCI_IRQ			{ IRQ_PBA8_SCI, NO_IRQ }
-#define PBA8_UART0_IRQ		{ IRQ_PBA8_UART0, NO_IRQ }
-#define PBA8_UART1_IRQ		{ IRQ_PBA8_UART1, NO_IRQ }
-#define PBA8_UART2_IRQ		{ IRQ_PBA8_UART2, NO_IRQ }
-#define PBA8_UART3_IRQ		{ IRQ_PBA8_UART3, NO_IRQ }
-#define PBA8_SSP_IRQ		{ IRQ_PBA8_SSP, NO_IRQ }
+#define KMI0_IRQ		{ IRQ_PBA8_KMI0 }
+#define KMI1_IRQ		{ IRQ_PBA8_KMI1 }
+#define PBA8_SMC_IRQ		{ }
+#define MPMC_IRQ		{ }
+#define PBA8_CLCD_IRQ		{ IRQ_PBA8_CLCD }
+#define DMAC_IRQ		{ IRQ_PBA8_DMAC }
+#define SCTL_IRQ		{ }
+#define PBA8_WATCHDOG_IRQ	{ IRQ_PBA8_WATCHDOG }
+#define PBA8_GPIO0_IRQ		{ IRQ_PBA8_GPIO0 }
+#define GPIO1_IRQ		{ IRQ_PBA8_GPIO1 }
+#define PBA8_RTC_IRQ		{ IRQ_PBA8_RTC }
+#define SCI_IRQ			{ IRQ_PBA8_SCI }
+#define PBA8_UART0_IRQ		{ IRQ_PBA8_UART0 }
+#define PBA8_UART1_IRQ		{ IRQ_PBA8_UART1 }
+#define PBA8_UART2_IRQ		{ IRQ_PBA8_UART2 }
+#define PBA8_UART3_IRQ		{ IRQ_PBA8_UART3 }
+#define PBA8_SSP_IRQ		{ IRQ_PBA8_SSP }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:uart3",	PBA8_UART3,	NULL);
+APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+APB_DEVICE(uart3,	"fpga:uart3",	PBA8_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:smc",	PBA8_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:wdog",	PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:gpio0",	PBA8_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:rtc",	PBA8_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:uart0",	PBA8_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:uart1",	PBA8_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:uart2",	PBA8_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:ssp0",	PBA8_SSP,	&ssp0_plat_data);
+AHB_DEVICE(smc,		"dev:smc",	PBA8_SMC,	NULL);
+AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+APB_DEVICE(wdog,	"dev:wdog",	PBA8_WATCHDOG, NULL);
+APB_DEVICE(gpio0,	"dev:gpio0",	PBA8_GPIO0,	&gpio0_plat_data);
+APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+APB_DEVICE(rtc,		"dev:rtc",	PBA8_RTC,	NULL);
+APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+APB_DEVICE(uart0,	"dev:uart0",	PBA8_UART0,	NULL);
+APB_DEVICE(uart1,	"dev:uart1",	PBA8_UART1,	NULL);
+APB_DEVICE(uart2,	"dev:uart2",	PBA8_UART2,	NULL);
+APB_DEVICE(ssp0,	"dev:ssp0",	PBA8_SSP,	&ssp0_plat_data);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:clcd",	PBA8_CLCD,	&clcd_plat_data);
-AMBA_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
+AHB_DEVICE(clcd,	"issp:clcd",	PBA8_CLCD,	&clcd_plat_data);
+AHB_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,

arch/arm/mach-realview/realview_pbx.c

@@ -144,52 +144,52 @@ static struct pl022_ssp_controller ssp0_plat_data = {
  * RealView PBXCore AMBA devices
  */
 
-#define GPIO2_IRQ		{ IRQ_PBX_GPIO2, NO_IRQ }
-#define GPIO3_IRQ		{ IRQ_PBX_GPIO3, NO_IRQ }
-#define AACI_IRQ		{ IRQ_PBX_AACI, NO_IRQ }
+#define GPIO2_IRQ		{ IRQ_PBX_GPIO2 }
+#define GPIO3_IRQ		{ IRQ_PBX_GPIO3 }
+#define AACI_IRQ		{ IRQ_PBX_AACI }
 #define MMCI0_IRQ		{ IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
-#define KMI0_IRQ		{ IRQ_PBX_KMI0, NO_IRQ }
-#define KMI1_IRQ		{ IRQ_PBX_KMI1, NO_IRQ }
-#define PBX_SMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define MPMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define PBX_CLCD_IRQ		{ IRQ_PBX_CLCD, NO_IRQ }
-#define DMAC_IRQ		{ IRQ_PBX_DMAC, NO_IRQ }
-#define SCTL_IRQ		{ NO_IRQ, NO_IRQ }
-#define PBX_WATCHDOG_IRQ	{ IRQ_PBX_WATCHDOG, NO_IRQ }
-#define PBX_GPIO0_IRQ		{ IRQ_PBX_GPIO0, NO_IRQ }
-#define GPIO1_IRQ		{ IRQ_PBX_GPIO1, NO_IRQ }
-#define PBX_RTC_IRQ		{ IRQ_PBX_RTC, NO_IRQ }
-#define SCI_IRQ			{ IRQ_PBX_SCI, NO_IRQ }
-#define PBX_UART0_IRQ		{ IRQ_PBX_UART0, NO_IRQ }
-#define PBX_UART1_IRQ		{ IRQ_PBX_UART1, NO_IRQ }
-#define PBX_UART2_IRQ		{ IRQ_PBX_UART2, NO_IRQ }
-#define PBX_UART3_IRQ		{ IRQ_PBX_UART3, NO_IRQ }
-#define PBX_SSP_IRQ		{ IRQ_PBX_SSP, NO_IRQ }
+#define KMI0_IRQ		{ IRQ_PBX_KMI0 }
+#define KMI1_IRQ		{ IRQ_PBX_KMI1 }
+#define PBX_SMC_IRQ		{ }
+#define MPMC_IRQ		{ }
+#define PBX_CLCD_IRQ		{ IRQ_PBX_CLCD }
+#define DMAC_IRQ		{ IRQ_PBX_DMAC }
+#define SCTL_IRQ		{ }
+#define PBX_WATCHDOG_IRQ	{ IRQ_PBX_WATCHDOG }
+#define PBX_GPIO0_IRQ		{ IRQ_PBX_GPIO0 }
+#define GPIO1_IRQ		{ IRQ_PBX_GPIO1 }
+#define PBX_RTC_IRQ		{ IRQ_PBX_RTC }
+#define SCI_IRQ			{ IRQ_PBX_SCI }
+#define PBX_UART0_IRQ		{ IRQ_PBX_UART0 }
+#define PBX_UART1_IRQ		{ IRQ_PBX_UART1 }
+#define PBX_UART2_IRQ		{ IRQ_PBX_UART2 }
+#define PBX_UART3_IRQ		{ IRQ_PBX_UART3 }
+#define PBX_SSP_IRQ		{ IRQ_PBX_SSP }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:uart3",	PBX_UART3,	NULL);
+APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+APB_DEVICE(uart3,	"fpga:uart3",	PBX_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:smc",	PBX_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:wdog",	PBX_WATCHDOG, 	NULL);
-AMBA_DEVICE(gpio0,	"dev:gpio0",	PBX_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:rtc",	PBX_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:uart0",	PBX_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:uart1",	PBX_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:uart2",	PBX_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:ssp0",	PBX_SSP,	&ssp0_plat_data);
+AHB_DEVICE(smc,	"dev:smc",	PBX_SMC,	NULL);
+AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+APB_DEVICE(wdog,	"dev:wdog",	PBX_WATCHDOG, 	NULL);
+APB_DEVICE(gpio0,	"dev:gpio0",	PBX_GPIO0,	&gpio0_plat_data);
+APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+APB_DEVICE(rtc,		"dev:rtc",	PBX_RTC,	NULL);
+APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+APB_DEVICE(uart0,	"dev:uart0",	PBX_UART0,	NULL);
+APB_DEVICE(uart1,	"dev:uart1",	PBX_UART1,	NULL);
+APB_DEVICE(uart2,	"dev:uart2",	PBX_UART2,	NULL);
+APB_DEVICE(ssp0,	"dev:ssp0",	PBX_SSP,	&ssp0_plat_data);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:clcd",	PBX_CLCD,	&clcd_plat_data);
-AMBA_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
+AHB_DEVICE(clcd,	"issp:clcd",	PBX_CLCD,	&clcd_plat_data);
+AHB_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,

arch/arm/mach-rpc/include/mach/system.h

-/*
- *  arch/arm/mach-rpc/include/mach/system.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}

arch/arm/mach-s3c2410/include/mach/system.h

-/* arch/arm/mach-s3c2410/include/mach/system.h
- *
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-#include <mach/map.h>
-#include <mach/idle.h>
-
-#include <mach/regs-clock.h>
-
-void (*s3c24xx_idle)(void);
-
-void s3c24xx_default_idle(void)
-{
-	unsigned long tmp;
-	int i;
-
-	/* idle the system by using the idle mode which will wait for an
-	 * interrupt to happen before restarting the system.
-	 */
-
-	/* Warning: going into idle state upsets jtag scanning */
-
-	__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
-		     S3C2410_CLKCON);
-
-	/* the samsung port seems to do a loop and then unset idle.. */
-	for (i = 0; i < 50; i++) {
-		tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
-	}
-
-	/* this bit is not cleared on re-start... */
-
-	__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
-		     S3C2410_CLKCON);
-}
-
-static void arch_idle(void)
-{
-	if (s3c24xx_idle != NULL)
-		(s3c24xx_idle)();
-	else
-		s3c24xx_default_idle();
-}

arch/arm/mach-s3c2412/s3c2412.c

@@ -32,8 +32,6 @@
 #include <asm/proc-fns.h>
 #include <asm/irq.h>
 
-#include <mach/idle.h>
-
 #include <plat/cpu-freq.h>
 
 #include <mach/regs-clock.h>
@@ -164,7 +162,7 @@ void __init s3c2412_map_io(void)
 
 	/* set our idle function */
 
-	s3c24xx_idle = s3c2412_idle;
+	arm_pm_idle = s3c2412_idle;
 
 	/* register our io-tables */
 

arch/arm/mach-s3c2416/s3c2416.c

@@ -44,7 +44,6 @@
 #include <asm/proc-fns.h>
 #include <asm/irq.h>
 
-#include <mach/idle.h>
 #include <mach/regs-s3c2443-clock.h>
 
 #include <plat/gpio-core.h>
@@ -88,8 +87,6 @@ int __init s3c2416_init(void)
 {
 	printk(KERN_INFO "S3C2416: Initializing architecture\n");
 
-	/* s3c24xx_idle = s3c2416_idle;	*/
-
 	/* change WDT IRQ number */
 	s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
 	s3c_device_wdt.resource[1].end   = IRQ_S3C2443_WDT;

arch/arm/mach-s3c64xx/include/mach/system.h

-/* linux/arch/arm/mach-s3c6400/include/mach/system.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C6400 - system implementation
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
-	/* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_IRQ_H */

arch/arm/mach-s5p64x0/common.c

@@ -146,15 +146,12 @@ static void s5p64x0_idle(void)
 {
 	unsigned long val;
 
-	if (!need_resched()) {
-		val = __raw_readl(S5P64X0_PWR_CFG);
-		val &= ~(0x3 << 5);
-		val |= (0x1 << 5);
-		__raw_writel(val, S5P64X0_PWR_CFG);
+	val = __raw_readl(S5P64X0_PWR_CFG);
+	val &= ~(0x3 << 5);
+	val |= (0x1 << 5);
+	__raw_writel(val, S5P64X0_PWR_CFG);
 
-		cpu_do_idle();
-	}
-	local_irq_enable();
+	cpu_do_idle();
 }
 
 /*
@@ -286,7 +283,7 @@ int __init s5p64x0_init(void)
 	printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
 
 	/* set idle function */
-	pm_idle = s5p64x0_idle;
+	arm_pm_idle = s5p64x0_idle;
 
 	return device_register(&s5p64x0_dev);
 }

arch/arm/mach-s5p64x0/dma.c

@@ -108,34 +108,22 @@ struct dma_pl330_platdata s5p6450_pdma_pdata = {
 	.peri_id = s5p6450_pdma_peri,
 };
 
-struct amba_device s5p64x0_device_pdma = {
-	.dev = {
-		.init_name = "dma-pl330",
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.res = {
-		.start = S5P64X0_PA_PDMA,
-		.end = S5P64X0_PA_PDMA + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_DMA0, NO_IRQ},
-	.periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330, S5P64X0_PA_PDMA,
+	{IRQ_DMA0}, NULL);
 
 static int __init s5p64x0_dma_init(void)
 {
 	if (soc_is_s5p6450()) {
 		dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask);
 		dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask);
-		s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
+		s5p64x0_pdma_device.dev.platform_data = &s5p6450_pdma_pdata;
 	} else {
 		dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask);
 		dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask);
-		s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
+		s5p64x0_pdma_device.dev.platform_data = &s5p6440_pdma_pdata;
 	}
 
-	amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
+	amba_device_register(&s5p64x0_pdma_device, &iomem_resource);
 
 	return 0;
 }

arch/arm/mach-s5p64x0/include/mach/system.h

-/* linux/arch/arm/mach-s5p64x0/include/mach/system.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
-	/* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */

arch/arm/mach-s5pc100/common.c

@@ -129,14 +129,6 @@ static struct map_desc s5pc100_iodesc[] __initdata = {
 	}
 };
 
-static void s5pc100_idle(void)
-{
-	if (!need_resched())
-		cpu_do_idle();
-
-	local_irq_enable();
-}
-
 /*
  * s5pc100_map_io
  *
@@ -210,10 +202,6 @@ core_initcall(s5pc100_core_init);
 int __init s5pc100_init(void)
 {
 	printk(KERN_INFO "S5PC100: Initializing architecture\n");
-
-	/* set idle function */
-	pm_idle = s5pc100_idle;
-
 	return device_register(&s5pc100_dev);
 }
 

arch/arm/mach-s5pc100/dma.c

@@ -73,21 +73,8 @@ struct dma_pl330_platdata s5pc100_pdma0_pdata = {
 	.peri_id = pdma0_peri,
 };
 
-struct amba_device s5pc100_device_pdma0 = {
-	.dev = {
-		.init_name = "dma-pl330.0",
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s5pc100_pdma0_pdata,
-	},
-	.res = {
-		.start = S5PC100_PA_PDMA0,
-		.end = S5PC100_PA_PDMA0 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_PDMA0, NO_IRQ},
-	.periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5pc100_pdma0,  "dma-pl330.0", 0x00041330, S5PC100_PA_PDMA0,
+	{IRQ_PDMA0}, &s5pc100_pdma0_pdata);
 
 u8 pdma1_peri[] = {
 	DMACH_UART0_RX,
@@ -127,31 +114,18 @@ struct dma_pl330_platdata s5pc100_pdma1_pdata = {
 	.peri_id = pdma1_peri,
 };
 
-struct amba_device s5pc100_device_pdma1 = {
-	.dev = {
-		.init_name = "dma-pl330.1",
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s5pc100_pdma1_pdata,
-	},
-	.res = {
-		.start = S5PC100_PA_PDMA1,
-		.end = S5PC100_PA_PDMA1 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_PDMA1, NO_IRQ},
-	.periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330, S5PC100_PA_PDMA1,
+	{IRQ_PDMA1}, &s5pc100_pdma1_pdata);
 
 static int __init s5pc100_dma_init(void)
 {
 	dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask);
 	dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask);
-	amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
+	amba_device_register(&s5pc100_pdma0_device, &iomem_resource);
 
 	dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask);
 	dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask);
-	amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
+	amba_device_register(&s5pc100_pdma1_device, &iomem_resource);
 
 	return 0;
 }

arch/arm/mach-s5pc100/include/mach/system.h

-/* linux/arch/arm/mach-s5pc100/include/mach/system.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - system implementation
- *
- * Based on mach-s3c6400/include/mach/system.h
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
-	/* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_IRQ_H */

arch/arm/mach-s5pv210/common.c

@@ -142,14 +142,6 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
 	}
 };
 
-static void s5pv210_idle(void)
-{
-	if (!need_resched())
-		cpu_do_idle();
-
-	local_irq_enable();
-}
-
 void s5pv210_restart(char mode, const char *cmd)
 {
 	__raw_writel(0x1, S5P_SWRESET);
@@ -247,10 +239,6 @@ core_initcall(s5pv210_core_init);
 int __init s5pv210_init(void)
 {
 	printk(KERN_INFO "S5PV210: Initializing architecture\n");
-
-	/* set idle function */
-	pm_idle = s5pv210_idle;
-
 	return device_register(&s5pv210_dev);
 }
 

arch/arm/mach-s5pv210/dma.c

@@ -71,21 +71,8 @@ struct dma_pl330_platdata s5pv210_pdma0_pdata = {
 	.peri_id = pdma0_peri,
 };
 
-struct amba_device s5pv210_device_pdma0 = {
-	.dev = {
-		.init_name = "dma-pl330.0",
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s5pv210_pdma0_pdata,
-	},
-	.res = {
-		.start = S5PV210_PA_PDMA0,
-		.end = S5PV210_PA_PDMA0 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_PDMA0, NO_IRQ},
-	.periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330, S5PV210_PA_PDMA0,
+	{IRQ_PDMA0}, &s5pv210_pdma0_pdata);
 
 u8 pdma1_peri[] = {
 	DMACH_UART0_RX,
@@ -127,31 +114,18 @@ struct dma_pl330_platdata s5pv210_pdma1_pdata = {
 	.peri_id = pdma1_peri,
 };
 
-struct amba_device s5pv210_device_pdma1 = {
-	.dev = {
-		.init_name = "dma-pl330.1",
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s5pv210_pdma1_pdata,
-	},
-	.res = {
-		.start = S5PV210_PA_PDMA1,
-		.end = S5PV210_PA_PDMA1 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_PDMA1, NO_IRQ},
-	.periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330, S5PV210_PA_PDMA1,
+	{IRQ_PDMA1}, &s5pv210_pdma1_pdata);
 
 static int __init s5pv210_dma_init(void)
 {
 	dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask);
 	dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask);
-	amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
+	amba_device_register(&s5pv210_pdma0_device, &iomem_resource);
 
 	dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask);
 	dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask);
-	amba_device_register(&s5pv210_device_pdma1, &iomem_resource);
+	amba_device_register(&s5pv210_pdma1_device, &iomem_resource);
 
 	return 0;
 }

arch/arm/mach-s5pv210/include/mach/system.h

-/* linux/arch/arm/mach-s5pv210/include/mach/system.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PV210 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
-	/* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */

arch/arm/mach-sa1100/include/mach/system.h

-/*
- * arch/arm/mach-sa1100/include/mach/system.h
- *
- * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}

arch/arm/mach-shark/core.c

@@ -149,10 +149,16 @@ static struct sys_timer shark_timer = {
 	.init		= shark_timer_init,
 };
 
+static void shark_init_early(void)
+{
+	disable_hlt();
+}
+
 MACHINE_START(SHARK, "Shark")
 	/* Maintainer: Alexander Schulz */
 	.atag_offset	= 0x3000,
 	.map_io		= shark_map_io,
+	.init_early	= shark_init_early,
 	.init_irq	= shark_init_irq,
 	.timer		= &shark_timer,
 	.dma_zone_size	= SZ_4M,

arch/arm/mach-shark/include/mach/system.h

-/*
- * arch/arm/mach-shark/include/mach/system.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-}
-
-#endif

arch/arm/mach-shmobile/Kconfig

@@ -100,6 +100,10 @@ config MACH_MARZEN
 
 comment "SH-Mobile System Configuration"
 
+config CPU_HAS_INTEVT
+        bool
+	default y
+
 menu "Memory configuration"
 
 config MEMORY_START

arch/arm/mach-shmobile/board-ag5evm.c

@@ -42,6 +42,7 @@
 #include <video/sh_mipi_dsi.h>
 #include <sound/sh_fsi.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <mach/sh73a0.h>
 #include <mach/common.h>
 #include <asm/mach-types.h>

arch/arm/mach-shmobile/board-bonito.c

@@ -34,6 +34,7 @@
 #include <asm/mach/time.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <mach/r8a7740.h>
+#include <mach/irqs.h>
 #include <video/sh_mobile_lcdc.h>
 
 /*

arch/arm/mach-shmobile/board-g3evm.c

@@ -33,6 +33,7 @@
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/dma-mapping.h>
+#include <mach/irqs.h>
 #include <mach/sh7367.h>
 #include <mach/common.h>
 #include <asm/mach-types.h>

arch/arm/mach-shmobile/board-g4evm.c

@@ -34,6 +34,7 @@
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/gpio.h>
 #include <linux/dma-mapping.h>
+#include <mach/irqs.h>
 #include <mach/sh7377.h>
 #include <mach/common.h>
 #include <asm/mach-types.h>

arch/arm/mach-shmobile/board-kota2.c

@@ -39,6 +39,7 @@
 #include <linux/mfd/tmio.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <mach/sh73a0.h>
 #include <mach/common.h>
 #include <asm/mach-types.h>

arch/arm/mach-shmobile/board-mackerel.c

@@ -55,6 +55,7 @@
 #include <sound/sh_fsi.h>
 
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/sh7372.h>
 
 #include <asm/mach/arch.h>

arch/arm/mach-shmobile/board-marzen.c

@@ -31,6 +31,7 @@
 #include <mach/hardware.h>
 #include <mach/r8a7779.h>
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

arch/arm/mach-shmobile/include/mach/irqs.h

 #ifndef __ASM_MACH_IRQS_H
 #define __ASM_MACH_IRQS_H
 
-#define NR_IRQS         1024
+#include <linux/sh_intc.h>
 
 /* GIC */
 #define gic_spi(nr)		((nr) + 32)
 
-/* INTCA */
-#define evt2irq(evt)		(((evt) >> 5) - 16)
-#define irq2evt(irq)		(((irq) + 16) << 5)
-
 /* INTCS */
 #define INTCS_VECT_BASE		0x2200
 #define INTCS_VECT(n, vect)	INTC_VECT((n), INTCS_VECT_BASE + (vect))

arch/arm/mach-shmobile/include/mach/system.h

 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
 static inline void arch_reset(char mode, const char *cmd)
 {
 	soft_restart(0);

arch/arm/mach-shmobile/intc-r8a7740.c

@@ -25,6 +25,7 @@
 #include <linux/io.h>
 #include <linux/sh_intc.h>
 #include <mach/intc.h>
+#include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 

arch/arm/mach-shmobile/intc-sh7367.c

@@ -23,6 +23,7 @@
 #include <linux/io.h>
 #include <linux/sh_intc.h>
 #include <mach/intc.h>
+#include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 

arch/arm/mach-shmobile/intc-sh7372.c

@@ -23,6 +23,7 @@
 #include <linux/io.h>
 #include <linux/sh_intc.h>
 #include <mach/intc.h>
+#include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 

arch/arm/mach-shmobile/intc-sh7377.c

@@ -23,6 +23,7 @@
 #include <linux/io.h>
 #include <linux/sh_intc.h>
 #include <mach/intc.h>
+#include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 

arch/arm/mach-shmobile/intc-sh73a0.c

@@ -23,6 +23,7 @@
 #include <linux/io.h>
 #include <linux/sh_intc.h>
 #include <mach/intc.h>
+#include <mach/irqs.h>
 #include <mach/sh73a0.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>

arch/arm/mach-shmobile/setup-r8a7740.c

@@ -25,6 +25,7 @@
 #include <linux/serial_sci.h>
 #include <linux/sh_timer.h>
 #include <mach/r8a7740.h>
+#include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 

arch/arm/mach-shmobile/setup-r8a7779.c

@@ -29,6 +29,7 @@
 #include <linux/sh_intc.h>
 #include <linux/sh_timer.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <mach/r8a7779.h>
 #include <mach/common.h>
 #include <asm/mach-types.h>

arch/arm/mach-shmobile/setup-sh7367.c

@@ -29,6 +29,7 @@
 #include <linux/serial_sci.h>
 #include <linux/sh_timer.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 

arch/arm/mach-shmobile/setup-sh7372.c

@@ -32,6 +32,7 @@
 #include <linux/sh_timer.h>
 #include <linux/pm_domain.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <mach/sh7372.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-shmobile/setup-sh7377.c

@@ -30,6 +30,7 @@
 #include <linux/sh_intc.h>
 #include <linux/sh_timer.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 

arch/arm/mach-shmobile/setup-sh73a0.c

@@ -31,6 +31,7 @@
 #include <linux/sh_intc.h>
 #include <linux/sh_timer.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <mach/sh73a0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-spear3xx/include/mach/system.h

-/*
- * arch/arm/mach-spear3xx/include/mach/system.h
- *
- * SPEAr3xx Machine family specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <plat/system.h>
-
-#endif /* __MACH_SYSTEM_H */

arch/arm/mach-spear3xx/spear300.c

@@ -430,18 +430,8 @@ static struct pl061_platform_data gpio1_plat_data = {
 	.irq_base	= SPEAR300_GPIO1_INT_BASE,
 };
 
-struct amba_device spear300_gpio1_device = {
-	.dev = {
-		.init_name = "gpio1",
-		.platform_data = &gpio1_plat_data,
-	},
-	.res = {
-		.start = SPEAR300_GPIO_BASE,
-		.end = SPEAR300_GPIO_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {SPEAR300_VIRQ_GPIO1, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE,
+	{SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data);
 
 /* spear300 routines */
 void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,

arch/arm/mach-spear3xx/spear3xx.c

@@ -28,31 +28,12 @@ static struct pl061_platform_data gpio_plat_data = {
 	.irq_base	= SPEAR3XX_GPIO_INT_BASE,
 };
 
-struct amba_device spear3xx_gpio_device = {
-	.dev = {
-		.init_name = "gpio",
-		.platform_data = &gpio_plat_data,
-	},
-	.res = {
-		.start = SPEAR3XX_ICM3_GPIO_BASE,
-		.end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {SPEAR3XX_IRQ_BASIC_GPIO, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE,
+	{SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data);
 
 /* uart device registration */
-struct amba_device spear3xx_uart_device = {
-	.dev = {
-		.init_name = "uart",
-	},
-	.res = {
-		.start = SPEAR3XX_ICM1_UART_BASE,
-		.end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {SPEAR3XX_IRQ_UART, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE,
+	{SPEAR3XX_IRQ_UART}, NULL);
 
 /* Do spear3xx familiy common initialization part here */
 void __init spear3xx_init(void)

arch/arm/mach-spear6xx/include/mach/system.h

-/*
- * arch/arm/mach-spear6xx/include/mach/system.h
- *
- * SPEAr6xx Machine family specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <plat/system.h>
-
-#endif	/* __MACH_SYSTEM_H */

arch/arm/mach-spear6xx/spear6xx.c

@@ -34,7 +34,7 @@ struct amba_device uart_device[] = {
 			.end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1,
 			.flags = IORESOURCE_MEM,
 		},
-		.irq = {IRQ_UART_0, NO_IRQ},
+		.irq = {IRQ_UART_0},
 	}, {
 		.dev = {
 			.init_name = "uart1",
@@ -44,7 +44,7 @@ struct amba_device uart_device[] = {
 			.end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1,
 			.flags = IORESOURCE_MEM,
 		},
-		.irq = {IRQ_UART_1, NO_IRQ},
+		.irq = {IRQ_UART_1},
 	}
 };
 
@@ -73,7 +73,7 @@ struct amba_device gpio_device[] = {
 			.end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1,
 			.flags = IORESOURCE_MEM,
 		},
-		.irq = {IRQ_LOCAL_GPIO, NO_IRQ},
+		.irq = {IRQ_LOCAL_GPIO},
 	}, {
 		.dev = {
 			.init_name = "gpio1",
@@ -84,7 +84,7 @@ struct amba_device gpio_device[] = {
 			.end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1,
 			.flags = IORESOURCE_MEM,
 		},
-		.irq = {IRQ_BASIC_GPIO, NO_IRQ},
+		.irq = {IRQ_BASIC_GPIO},
 	}, {
 		.dev = {
 			.init_name = "gpio2",
@@ -95,7 +95,7 @@ struct amba_device gpio_device[] = {
 			.end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1,
 			.flags = IORESOURCE_MEM,
 		},
-		.irq = {IRQ_APPL_GPIO, NO_IRQ},
+		.irq = {IRQ_APPL_GPIO},
 	}
 };
 

arch/arm/mach-tegra/common.c

@@ -27,7 +27,6 @@
 #include <asm/hardware/gic.h>
 
 #include <mach/iomap.h>
-#include <mach/system.h>
 
 #include "board.h"
 #include "clock.h"
@@ -96,6 +95,8 @@ static void __init tegra_init_cache(u32 tag_latency, u32 data_latency)
 #ifdef CONFIG_ARCH_TEGRA_2x_SOC
 void __init tegra20_init_early(void)
 {
+	disable_hlt();  /* idle WFI usage needs to be confirmed */
+
 	tegra_init_fuse();
 	tegra2_init_clocks();
 	tegra_clk_init_from_table(tegra20_clk_init_table);

arch/arm/mach-tegra/include/mach/system.h

-/*
- * arch/arm/mach-tegra/include/mach/system.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *	Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_SYSTEM_H
-#define __MACH_TEGRA_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-}
-
-#endif

arch/arm/mach-u300/core.c

@@ -94,19 +94,9 @@ static struct amba_pl011_data uart0_plat_data = {
 #endif
 };
 
-static struct amba_device uart0_device = {
-	.dev = {
-		.coherent_dma_mask = ~0,
-		.init_name = "uart0", /* Slow device at 0x3000 offset */
-		.platform_data = &uart0_plat_data,
-	},
-	.res = {
-		.start = U300_UART0_BASE,
-		.end   = U300_UART0_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = { IRQ_U300_UART0, NO_IRQ },
-};
+/* Slow device at 0x3000 offset */
+static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE,
+	{ IRQ_U300_UART0 }, &uart0_plat_data);
 
 /* The U335 have an additional UART1 on the APP CPU */
 #ifdef CONFIG_MACH_U300_BS335
@@ -118,71 +108,28 @@ static struct amba_pl011_data uart1_plat_data = {
 #endif
 };
 
-static struct amba_device uart1_device = {
-	.dev = {
-		.coherent_dma_mask = ~0,
-		.init_name = "uart1", /* Fast device at 0x7000 offset */
-		.platform_data = &uart1_plat_data,
-	},
-	.res = {
-		.start = U300_UART1_BASE,
-		.end   = U300_UART1_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = { IRQ_U300_UART1, NO_IRQ },
-};
+/* Fast device at 0x7000 offset */
+static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE,
+	{ IRQ_U300_UART1 }, &uart1_plat_data);
 #endif
 
-static struct amba_device pl172_device = {
-	.dev = {
-		.init_name = "pl172", /* AHB device at 0x4000 offset */
-		.platform_data = NULL,
-	},
-	.res = {
-		.start = U300_EMIF_CFG_BASE,
-		.end   = U300_EMIF_CFG_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
+/* AHB device at 0x4000 offset */
+static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL);
 
 
 /*
  * Everything within this next ifdef deals with external devices connected to
  * the APP SPI bus.
  */
-static struct amba_device pl022_device = {
-	.dev = {
-		.coherent_dma_mask = ~0,
-		.init_name = "pl022", /* Fast device at 0x6000 offset */
-	},
-	.res = {
-		.start = U300_SPI_BASE,
-		.end   = U300_SPI_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_U300_SPI, NO_IRQ },
-	/*
-	 * This device has a DMA channel but the Linux driver does not use
-	 * it currently.
-	 */
-};
+/* Fast device at 0x6000 offset */
+static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE,
+	{ IRQ_U300_SPI }, NULL);
 
-static struct amba_device mmcsd_device = {
-	.dev = {
-		.init_name = "mmci", /* Fast device at 0x1000 offset */
-		.platform_data = NULL, /* Added later */
-	},
-	.res = {
-		.start = U300_MMCSD_BASE,
-		.end   = U300_MMCSD_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 },
-	/*
-	 * This device has a DMA channel but the Linux driver does not use
-	 * it currently.
-	 */
-};
+/* Fast device at 0x1000 offset */
+#define U300_MMCSD_IRQS	{ IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }
+
+static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE,
+	U300_MMCSD_IRQS, NULL);
 
 /*
  * The order of device declaration may be important, since some devices

arch/arm/mach-u300/include/mach/system.h

-/*
- *
- * arch/arm/mach-u300/include/mach/system.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * System shutdown and reset functions.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}

arch/arm/mach-ux500/devices-common.c

@@ -26,29 +26,22 @@ dbx500_add_amba_device(const char *name, resource_size_t base,
 	struct amba_device *dev;
 	int ret;
 
-	dev = kzalloc(sizeof *dev, GFP_KERNEL);
+	dev = amba_device_alloc(name, base, SZ_4K);
 	if (!dev)
 		return ERR_PTR(-ENOMEM);
 
-	dev->dev.init_name = name;
-
-	dev->res.start = base;
-	dev->res.end = base + SZ_4K - 1;
-	dev->res.flags = IORESOURCE_MEM;
-
 	dev->dma_mask = DMA_BIT_MASK(32);
 	dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	dev->irq[0] = irq;
-	dev->irq[1] = NO_IRQ;
 
 	dev->periphid = periphid;
 
 	dev->dev.platform_data = pdata;
 
-	ret = amba_device_register(dev, &iomem_resource);
+	ret = amba_device_add(dev, &iomem_resource);
 	if (ret) {
-		kfree(dev);
+		amba_device_put(dev);
 		return ERR_PTR(ret);
 	}
 

arch/arm/mach-ux500/include/mach/system.h

-/*
- * Copyright (C) 2009 ST-Ericsson.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-versatile/core.c

@@ -582,58 +582,58 @@ static struct pl022_ssp_controller ssp0_plat_data = {
 	.num_chipselect = 1,
 };
 
-#define AACI_IRQ	{ IRQ_AACI, NO_IRQ }
+#define AACI_IRQ	{ IRQ_AACI }
 #define MMCI0_IRQ	{ IRQ_MMCI0A,IRQ_SIC_MMCI0B }
-#define KMI0_IRQ	{ IRQ_SIC_KMI0, NO_IRQ }
-#define KMI1_IRQ	{ IRQ_SIC_KMI1, NO_IRQ }
+#define KMI0_IRQ	{ IRQ_SIC_KMI0 }
+#define KMI1_IRQ	{ IRQ_SIC_KMI1 }
 
 /*
  * These devices are connected directly to the multi-layer AHB switch
  */
-#define SMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define MPMC_IRQ	{ NO_IRQ, NO_IRQ }
-#define CLCD_IRQ	{ IRQ_CLCDINT, NO_IRQ }
-#define DMAC_IRQ	{ IRQ_DMAINT, NO_IRQ }
+#define SMC_IRQ		{ }
+#define MPMC_IRQ	{ }
+#define CLCD_IRQ	{ IRQ_CLCDINT }
+#define DMAC_IRQ	{ IRQ_DMAINT }
 
 /*
  * These devices are connected via the core APB bridge
  */
-#define SCTL_IRQ	{ NO_IRQ, NO_IRQ }
-#define WATCHDOG_IRQ	{ IRQ_WDOGINT, NO_IRQ }
-#define GPIO0_IRQ	{ IRQ_GPIOINT0, NO_IRQ }
-#define GPIO1_IRQ	{ IRQ_GPIOINT1, NO_IRQ }
-#define RTC_IRQ		{ IRQ_RTCINT, NO_IRQ }
+#define SCTL_IRQ	{ }
+#define WATCHDOG_IRQ	{ IRQ_WDOGINT }
+#define GPIO0_IRQ	{ IRQ_GPIOINT0 }
+#define GPIO1_IRQ	{ IRQ_GPIOINT1 }
+#define RTC_IRQ		{ IRQ_RTCINT }
 
 /*
  * These devices are connected via the DMA APB bridge
  */
-#define SCI_IRQ		{ IRQ_SCIINT, NO_IRQ }
-#define UART0_IRQ	{ IRQ_UARTINT0, NO_IRQ }
-#define UART1_IRQ	{ IRQ_UARTINT1, NO_IRQ }
-#define UART2_IRQ	{ IRQ_UARTINT2, NO_IRQ }
-#define SSP_IRQ		{ IRQ_SSPINT, NO_IRQ }
+#define SCI_IRQ		{ IRQ_SCIINT }
+#define UART0_IRQ	{ IRQ_UARTINT0 }
+#define UART1_IRQ	{ IRQ_UARTINT1 }
+#define UART2_IRQ	{ IRQ_UARTINT2 }
+#define SSP_IRQ		{ IRQ_SSPINT }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,  "fpga:04", AACI,     NULL);
-AMBA_DEVICE(mmc0,  "fpga:05", MMCI0,    &mmc0_plat_data);
-AMBA_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
-AMBA_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
+APB_DEVICE(aaci,  "fpga:04", AACI,     NULL);
+APB_DEVICE(mmc0,  "fpga:05", MMCI0,    &mmc0_plat_data);
+APB_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
+APB_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,   "dev:00",  SMC,      NULL);
-AMBA_DEVICE(mpmc,  "dev:10",  MPMC,     NULL);
-AMBA_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
-AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
-AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
-AMBA_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
-AMBA_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
-AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
-AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
-AMBA_DEVICE(uart1, "dev:f2",  UART1,    NULL);
-AMBA_DEVICE(uart2, "dev:f3",  UART2,    NULL);
-AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      &ssp0_plat_data);
+AHB_DEVICE(smc,   "dev:00",  SMC,      NULL);
+AHB_DEVICE(mpmc,  "dev:10",  MPMC,     NULL);
+AHB_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
+AHB_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
+APB_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
+APB_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:e4",  GPIO0,    &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
+APB_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
+APB_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
+APB_DEVICE(uart0, "dev:f1",  UART0,    NULL);
+APB_DEVICE(uart1, "dev:f2",  UART1,    NULL);
+APB_DEVICE(uart2, "dev:f3",  UART2,    NULL);
+APB_DEVICE(ssp0,  "dev:f4",  SSP,      &ssp0_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,

arch/arm/mach-versatile/core.h

@@ -36,20 +36,10 @@ extern unsigned int mmc_status(struct device *dev);
 extern struct of_dev_auxdata versatile_auxdata_lookup[];
 #endif
 
-#define AMBA_DEVICE(name,busid,base,plat)			\
-static struct amba_device name##_device = {			\
-	.dev		= {					\
-		.coherent_dma_mask = ~0,			\
-		.init_name = busid,				\
-		.platform_data = plat,				\
-	},							\
-	.res		= {					\
-		.start	= VERSATILE_##base##_BASE,		\
-		.end	= (VERSATILE_##base##_BASE) + SZ_4K - 1,\
-		.flags	= IORESOURCE_MEM,			\
-	},							\
-	.dma_mask	= ~0,					\
-	.irq		= base##_IRQ,				\
-}
+#define APB_DEVICE(name, busid, base, plat)	\
+static AMBA_APB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
+
+#define AHB_DEVICE(name, busid, base, plat)	\
+static AMBA_AHB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
 
 #endif

arch/arm/mach-versatile/include/mach/system.h

-/*
- *  arch/arm/mach-versatile/include/mach/system.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-versatile/versatile_pb.c

@@ -58,28 +58,28 @@ static struct pl061_platform_data gpio3_plat_data = {
 	.irq_base	= IRQ_GPIO3_START,
 };
 
-#define UART3_IRQ	{ IRQ_SIC_UART3, NO_IRQ }
-#define SCI1_IRQ	{ IRQ_SIC_SCI3, NO_IRQ }
+#define UART3_IRQ	{ IRQ_SIC_UART3 }
+#define SCI1_IRQ	{ IRQ_SIC_SCI3 }
 #define MMCI1_IRQ	{ IRQ_MMCI1A, IRQ_SIC_MMCI1B }
 
 /*
  * These devices are connected via the core APB bridge
  */
-#define GPIO2_IRQ	{ IRQ_GPIOINT2, NO_IRQ }
-#define GPIO3_IRQ	{ IRQ_GPIOINT3, NO_IRQ }
+#define GPIO2_IRQ	{ IRQ_GPIOINT2 }
+#define GPIO3_IRQ	{ IRQ_GPIOINT3 }
 
 /*
  * These devices are connected via the DMA APB bridge
  */
 
 /* FPGA Primecells */
-AMBA_DEVICE(uart3, "fpga:09", UART3,    NULL);
-AMBA_DEVICE(sci1,  "fpga:0a", SCI1,     NULL);
-AMBA_DEVICE(mmc1,  "fpga:0b", MMCI1,    &mmc1_plat_data);
+APB_DEVICE(uart3, "fpga:09", UART3,    NULL);
+APB_DEVICE(sci1,  "fpga:0a", SCI1,     NULL);
+APB_DEVICE(mmc1,  "fpga:0b", MMCI1,    &mmc1_plat_data);
 
 /* DevChip Primecells */
-AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
-AMBA_DEVICE(gpio3, "dev:e7",  GPIO3,    &gpio3_plat_data);
+APB_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
+APB_DEVICE(gpio3, "dev:e7",  GPIO3,    &gpio3_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&uart3_device,

arch/arm/mach-vexpress/core.h

 #define __MMIO_P2V(x)	(((x) & 0xfffff) | (((x) & 0x0f000000) >> 4) | 0xf8000000)
 #define MMIO_P2V(x)	((void __iomem *)__MMIO_P2V(x))
-
-#define AMBA_DEVICE(name,busid,base,plat)	\
-struct amba_device name##_device = {		\
-	.dev		= {			\
-		.coherent_dma_mask = ~0UL,	\
-		.init_name = busid,		\
-		.platform_data = plat,		\
-	},					\
-	.res		= {			\
-		.start	= base,			\
-		.end	= base + SZ_4K - 1,	\
-		.flags	= IORESOURCE_MEM,	\
-	},					\
-	.dma_mask	= ~0UL,			\
-	.irq		= IRQ_##base,		\
-	/* .dma		= DMA_##base,*/		\
-}

arch/arm/mach-vexpress/ct-ca9x4.c

@@ -109,10 +109,10 @@ static struct clcd_board ct_ca9x4_clcd_data = {
 	.remove		= versatile_clcd_remove_dma,
 };
 
-static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
-static AMBA_DEVICE(dmc, "ct:dmc", CT_CA9X4_DMC, NULL);
-static AMBA_DEVICE(smc, "ct:smc", CT_CA9X4_SMC, NULL);
-static AMBA_DEVICE(gpio, "ct:gpio", CT_CA9X4_GPIO, NULL);
+static AMBA_AHB_DEVICE(clcd, "ct:clcd", 0, CT_CA9X4_CLCDC, IRQ_CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
+static AMBA_APB_DEVICE(dmc, "ct:dmc", 0, CT_CA9X4_DMC, IRQ_CT_CA9X4_DMC, NULL);
+static AMBA_APB_DEVICE(smc, "ct:smc", 0, CT_CA9X4_SMC, IRQ_CT_CA9X4_SMC, NULL);
+static AMBA_APB_DEVICE(gpio, "ct:gpio", 0, CT_CA9X4_GPIO, IRQ_CT_CA9X4_GPIO, NULL);
 
 static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
 	&clcd_device,

arch/arm/mach-vexpress/include/mach/ct-ca9x4.h

@@ -35,7 +35,7 @@
  * Interrupts.  Those in {} are for AMBA devices
  */
 #define IRQ_CT_CA9X4_CLCDC	{ 76 }
-#define IRQ_CT_CA9X4_DMC	{ -1 }
+#define IRQ_CT_CA9X4_DMC	{ 0 }
 #define IRQ_CT_CA9X4_SMC	{ 77, 78 }
 #define IRQ_CT_CA9X4_TIMER0	80
 #define IRQ_CT_CA9X4_TIMER1	81

arch/arm/mach-vexpress/include/mach/system.h

-/*
- *  arch/arm/mach-vexpress/include/mach/system.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-vexpress/v2m.c

@@ -266,16 +266,16 @@ static struct mmci_platform_data v2m_mmci_data = {
 	.status		= v2m_mmci_status,
 };
 
-static AMBA_DEVICE(aaci,  "mb:aaci",  V2M_AACI, NULL);
-static AMBA_DEVICE(mmci,  "mb:mmci",  V2M_MMCI, &v2m_mmci_data);
-static AMBA_DEVICE(kmi0,  "mb:kmi0",  V2M_KMI0, NULL);
-static AMBA_DEVICE(kmi1,  "mb:kmi1",  V2M_KMI1, NULL);
-static AMBA_DEVICE(uart0, "mb:uart0", V2M_UART0, NULL);
-static AMBA_DEVICE(uart1, "mb:uart1", V2M_UART1, NULL);
-static AMBA_DEVICE(uart2, "mb:uart2", V2M_UART2, NULL);
-static AMBA_DEVICE(uart3, "mb:uart3", V2M_UART3, NULL);
-static AMBA_DEVICE(wdt,   "mb:wdt",   V2M_WDT, NULL);
-static AMBA_DEVICE(rtc,   "mb:rtc",   V2M_RTC, NULL);
+static AMBA_APB_DEVICE(aaci,  "mb:aaci",  0, V2M_AACI, IRQ_V2M_AACI, NULL);
+static AMBA_APB_DEVICE(mmci,  "mb:mmci",  0, V2M_MMCI, IRQ_V2M_MMCI, &v2m_mmci_data);
+static AMBA_APB_DEVICE(kmi0,  "mb:kmi0",  0, V2M_KMI0, IRQ_V2M_KMI0, NULL);
+static AMBA_APB_DEVICE(kmi1,  "mb:kmi1",  0, V2M_KMI1, IRQ_V2M_KMI1, NULL);
+static AMBA_APB_DEVICE(uart0, "mb:uart0", 0, V2M_UART0, IRQ_V2M_UART0, NULL);
+static AMBA_APB_DEVICE(uart1, "mb:uart1", 0, V2M_UART1, IRQ_V2M_UART1, NULL);
+static AMBA_APB_DEVICE(uart2, "mb:uart2", 0, V2M_UART2, IRQ_V2M_UART2, NULL);
+static AMBA_APB_DEVICE(uart3, "mb:uart3", 0, V2M_UART3, IRQ_V2M_UART3, NULL);
+static AMBA_APB_DEVICE(wdt,   "mb:wdt",   0, V2M_WDT, IRQ_V2M_WDT, NULL);
+static AMBA_APB_DEVICE(rtc,   "mb:rtc",   0, V2M_RTC, IRQ_V2M_RTC, NULL);
 
 static struct amba_device *v2m_amba_devs[] __initdata = {
 	&aaci_device,

arch/arm/mach-vt8500/include/mach/system.h

@@ -7,11 +7,6 @@
 /* PM Software Reset request register */
 #define VT8500_PMSR_VIRT	0xf8130060
 
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
 static inline void arch_reset(char mode, const char *cmd)
 {
 	writel(1, VT8500_PMSR_VIRT);

arch/arm/mach-w90x900/dev.c

@@ -530,6 +530,7 @@ static struct platform_device *nuc900_public_dev[] __initdata = {
 
 void __init nuc900_board_init(struct platform_device **device, int size)
 {
+	disable_hlt();
 	platform_add_devices(device, size);
 	platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
 	spi_register_board_info(nuc900_spi_board_info,

arch/arm/mach-w90x900/include/mach/system.h

-/*
- * arch/arm/mach-w90x900/include/mach/system.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/system.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-static void arch_idle(void)
-{
-}

arch/arm/mach-zynq/include/mach/system.h

-/* arch/arm/mach-zynq/include/mach/system.h
- *
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_SYSTEM_H__
-#define __MACH_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif

arch/arm/plat-mxc/include/mach/system.h

-/*
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_SYSTEM_H__
-#define __ASM_ARCH_MXC_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */

arch/arm/plat-nomadik/Kconfig

@@ -23,7 +23,6 @@ config HAS_MTU
 config NOMADIK_MTU_SCHED_CLOCK
 	bool
 	depends on HAS_MTU
-	select HAVE_SCHED_CLOCK
 	help
 	  Use the Multi Timer Unit as the sched_clock.
 

arch/arm/plat-omap/include/plat/system.h

-/*
- * Copied from arch/arm/mach-sa1100/include/mach/system.h
- * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif

arch/arm/plat-s3c24xx/cpu.c

@@ -32,6 +32,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/regs-clock.h>
 #include <asm/irq.h>
 #include <asm/cacheflush.h>
 
@@ -190,8 +191,34 @@ static unsigned long s3c24xx_read_idcode_v4(void)
 	return __raw_readl(S3C2410_GSTATUS1);
 }
 
+static void s3c24xx_default_idle(void)
+{
+	unsigned long tmp;
+	int i;
+
+	/* idle the system by using the idle mode which will wait for an
+	 * interrupt to happen before restarting the system.
+	 */
+
+	/* Warning: going into idle state upsets jtag scanning */
+
+	__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+		     S3C2410_CLKCON);
+
+	/* the samsung port seems to do a loop and then unset idle.. */
+	for (i = 0; i < 50; i++)
+		tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
+
+	/* this bit is not cleared on re-start... */
+
+	__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+		     S3C2410_CLKCON);
+}
+
 void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 {
+	arm_pm_idle = s3c24xx_default_idle;
+
 	/* initialise the io descriptors we need for initialisation */
 	iotable_init(mach_desc, size);
 	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));

arch/arm/plat-spear/include/plat/system.h

-/*
- * arch/arm/plat-spear/include/plat/system.h
- *
- * SPEAr platform specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_SYSTEM_H
-#define __PLAT_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-#endif /* __PLAT_SYSTEM_H */

arch/arm/plat-versatile/Kconfig

@@ -12,6 +12,5 @@ config PLAT_VERSATILE_LEDS
 
 config PLAT_VERSATILE_SCHED_CLOCK
 	def_bool y
-	select HAVE_SCHED_CLOCK
 
 endif

arch/c6x/Kconfig

@@ -11,7 +11,7 @@ config TMS320C6X
 	select HAVE_DMA_API_DEBUG
 	select HAVE_GENERIC_HARDIRQS
 	select HAVE_MEMBLOCK
-	select HAVE_SPARSE_IRQ
+	select SPARSE_IRQ
 	select OF
 	select OF_EARLY_FLATTREE
 

arch/powerpc/Kconfig

@@ -133,7 +133,7 @@ config PPC
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64
 	select HAVE_GENERIC_HARDIRQS
-	select HAVE_SPARSE_IRQ
+	select MAY_HAVE_SPARSE_IRQ
 	select IRQ_PER_CPU
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL

arch/sh/Kconfig

@@ -22,7 +22,7 @@ config SUPERH
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_GENERIC_HARDIRQS
-	select HAVE_SPARSE_IRQ
+	select MAY_HAVE_SPARSE_IRQ
 	select IRQ_FORCED_THREADING
 	select RTC_LIB
 	select GENERIC_ATOMIC64

arch/sh/include/asm/irq.h

@@ -20,17 +20,6 @@
  */
 #define NO_IRQ_IGNORE		((unsigned int)-1)
 
-/*
- * Convert back and forth between INTEVT and IRQ values.
- */
-#ifdef CONFIG_CPU_HAS_INTEVT
-#define evt2irq(evt)		(((evt) >> 5) - 16)
-#define irq2evt(irq)		(((irq) + 16) << 5)
-#else
-#define evt2irq(evt)		(evt)
-#define irq2evt(irq)		(irq)
-#endif
-
 /*
  * Simple Mask Register Support
  */

arch/x86/Kconfig

@@ -69,7 +69,6 @@ config X86
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_TEXT_POKE_SMP
 	select HAVE_GENERIC_HARDIRQS
-	select HAVE_SPARSE_IRQ
 	select SPARSE_IRQ
 	select GENERIC_FIND_FIRST_BIT
 	select GENERIC_IRQ_PROBE

drivers/amba/bus.c

@@ -497,37 +497,22 @@ static void amba_device_release(struct device *dev)
 }
 
 /**
- *	amba_device_register - register an AMBA device
- *	@dev: AMBA device to register
- *	@parent: parent memory resource
+ *	amba_device_add - add a previously allocated AMBA device structure
+ *	@dev: AMBA device allocated by amba_device_alloc
+ *	@parent: resource parent for this devices resources
  *
- *	Setup the AMBA device, reading the cell ID if present.
- *	Claim the resource, and register the AMBA device with
- *	the Linux device manager.
+ *	Claim the resource, and read the device cell ID if not already
+ *	initialized.  Register the AMBA device with the Linux device
+ *	manager.
  */
-int amba_device_register(struct amba_device *dev, struct resource *parent)
+int amba_device_add(struct amba_device *dev, struct resource *parent)
 {
 	u32 size;
 	void __iomem *tmp;
 	int i, ret;
 
-	device_initialize(&dev->dev);
-
-	/*
-	 * Copy from device_add
-	 */
-	if (dev->dev.init_name) {
-		dev_set_name(&dev->dev, "%s", dev->dev.init_name);
-		dev->dev.init_name = NULL;
-	}
-
-	dev->dev.release = amba_device_release;
-	dev->dev.bus = &amba_bustype;
-	dev->dev.dma_mask = &dev->dma_mask;
-	dev->res.name = dev_name(&dev->dev);
-
-	if (!dev->dev.coherent_dma_mask && dev->dma_mask)
-		dev_warn(&dev->dev, "coherent dma mask is unset\n");
+	WARN_ON(dev->irq[0] == (unsigned int)-1);
+	WARN_ON(dev->irq[1] == (unsigned int)-1);
 
 	ret = request_resource(parent, &dev->res);
 	if (ret)
@@ -582,9 +567,9 @@ int amba_device_register(struct amba_device *dev, struct resource *parent)
 	if (ret)
 		goto err_release;
 
-	if (dev->irq[0] != NO_IRQ)
+	if (dev->irq[0] && dev->irq[0] != NO_IRQ)
 		ret = device_create_file(&dev->dev, &dev_attr_irq0);
-	if (ret == 0 && dev->irq[1] != NO_IRQ)
+	if (ret == 0 && dev->irq[1] && dev->irq[1] != NO_IRQ)
 		ret = device_create_file(&dev->dev, &dev_attr_irq1);
 	if (ret == 0)
 		return ret;
@@ -596,6 +581,74 @@ int amba_device_register(struct amba_device *dev, struct resource *parent)
  err_out:
 	return ret;
 }
+EXPORT_SYMBOL_GPL(amba_device_add);
+
+static void amba_device_initialize(struct amba_device *dev, const char *name)
+{
+	device_initialize(&dev->dev);
+	if (name)
+		dev_set_name(&dev->dev, "%s", name);
+	dev->dev.release = amba_device_release;
+	dev->dev.bus = &amba_bustype;
+	dev->dev.dma_mask = &dev->dma_mask;
+	dev->res.name = dev_name(&dev->dev);
+}
+
+/**
+ *	amba_device_alloc - allocate an AMBA device
+ *	@name: sysfs name of the AMBA device
+ *	@base: base of AMBA device
+ *	@size: size of AMBA device
+ *
+ *	Allocate and initialize an AMBA device structure.  Returns %NULL
+ *	on failure.
+ */
+struct amba_device *amba_device_alloc(const char *name, resource_size_t base,
+	size_t size)
+{
+	struct amba_device *dev;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (dev) {
+		amba_device_initialize(dev, name);
+		dev->res.start = base;
+		dev->res.end = base + size - 1;
+		dev->res.flags = IORESOURCE_MEM;
+	}
+
+	return dev;
+}
+EXPORT_SYMBOL_GPL(amba_device_alloc);
+
+/**
+ *	amba_device_register - register an AMBA device
+ *	@dev: AMBA device to register
+ *	@parent: parent memory resource
+ *
+ *	Setup the AMBA device, reading the cell ID if present.
+ *	Claim the resource, and register the AMBA device with
+ *	the Linux device manager.
+ */
+int amba_device_register(struct amba_device *dev, struct resource *parent)
+{
+	amba_device_initialize(dev, dev->dev.init_name);
+	dev->dev.init_name = NULL;
+
+	if (!dev->dev.coherent_dma_mask && dev->dma_mask)
+		dev_warn(&dev->dev, "coherent dma mask is unset\n");
+
+	return amba_device_add(dev, parent);
+}
+
+/**
+ *	amba_device_put - put an AMBA device
+ *	@dev: AMBA device to put
+ */
+void amba_device_put(struct amba_device *dev)
+{
+	put_device(&dev->dev);
+}
+EXPORT_SYMBOL_GPL(amba_device_put);
 
 /**
  *	amba_device_unregister - unregister an AMBA device

drivers/clocksource/Kconfig

@@ -26,7 +26,6 @@ config CLKSRC_DBX500_PRCMU
 config CLKSRC_DBX500_PRCMU_SCHED_CLOCK
 	bool "Clocksource PRCMU Timer sched_clock"
 	depends on (CLKSRC_DBX500_PRCMU && !NOMADIK_MTU_SCHED_CLOCK)
-	select HAVE_SCHED_CLOCK
 	default y
 	help
 	  Use the always on PRCMU Timer as sched_clock

drivers/gpio/gpio-pxa.c

@@ -22,6 +22,8 @@
 #include <linux/syscore_ops.h>
 #include <linux/slab.h>
 
+#include <mach/irqs.h>
+
 /*
  * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
  * one set of registers. The register offsets are organized below:

drivers/mmc/host/mmci.c

@@ -1325,7 +1325,7 @@ static int __devinit mmci_probe(struct amba_device *dev,
 	if (ret)
 		goto unmap;
 
-	if (dev->irq[1] == NO_IRQ)
+	if (dev->irq[1] == NO_IRQ || !dev->irq[1])
 		host->singleirq = true;
 	else {
 		ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED,

drivers/of/platform.c

@@ -253,7 +253,7 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
 	if (!of_device_is_available(node))
 		return NULL;
 
-	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	dev = amba_device_alloc(NULL, 0, 0);
 	if (!dev)
 		return NULL;
 
@@ -283,14 +283,14 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
 	if (ret)
 		goto err_free;
 
-	ret = amba_device_register(dev, &iomem_resource);
+	ret = amba_device_add(dev, &iomem_resource);
 	if (ret)
 		goto err_free;
 
 	return dev;
 
 err_free:
-	kfree(dev);
+	amba_device_put(dev);
 	return NULL;
 }
 #else /* CONFIG_ARM_AMBA */

drivers/sh/intc/balancing.c

@@ -9,7 +9,7 @@
  */
 #include "internals.h"
 
-static unsigned long dist_handle[NR_IRQS];
+static unsigned long dist_handle[INTC_NR_IRQS];
 
 void intc_balancing_enable(unsigned int irq)
 {

drivers/sh/intc/core.c

@@ -42,7 +42,7 @@ unsigned int nr_intc_controllers;
  * - this needs to be at least 2 for 5-bit priorities on 7780
  */
 static unsigned int default_prio_level = 2;	/* 2 - 16 */
-static unsigned int intc_prio_level[NR_IRQS];	/* for now */
+static unsigned int intc_prio_level[INTC_NR_IRQS];	/* for now */
 
 unsigned int intc_get_dfl_prio_level(void)
 {

drivers/sh/intc/handle.c

@@ -13,7 +13,7 @@
 #include <linux/spinlock.h>
 #include "internals.h"
 
-static unsigned long ack_handle[NR_IRQS];
+static unsigned long ack_handle[INTC_NR_IRQS];
 
 static intc_enum __init intc_grp_id(struct intc_desc *desc,
 				    intc_enum enum_id)

drivers/sh/intc/virq.c

@@ -17,7 +17,7 @@
 #include <linux/export.h>
 #include "internals.h"
 
-static struct intc_map_entry intc_irq_xlate[NR_IRQS];
+static struct intc_map_entry intc_irq_xlate[INTC_NR_IRQS];
 
 struct intc_virq_list {
 	unsigned int irq;

include/linux/amba/bus.h

@@ -60,6 +60,9 @@ extern struct bus_type amba_bustype;
 
 int amba_driver_register(struct amba_driver *);
 void amba_driver_unregister(struct amba_driver *);
+struct amba_device *amba_device_alloc(const char *, resource_size_t, size_t);
+void amba_device_put(struct amba_device *);
+int amba_device_add(struct amba_device *, struct resource *);
 int amba_device_register(struct amba_device *, struct resource *);
 void amba_device_unregister(struct amba_device *);
 struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int);
@@ -89,4 +92,37 @@ void amba_release_regions(struct amba_device *);
 #define amba_manf(d)	AMBA_MANF_BITS((d)->periphid)
 #define amba_part(d)	AMBA_PART_BITS((d)->periphid)
 
+#define __AMBA_DEV(busid, data, mask)				\
+	{							\
+		.coherent_dma_mask = mask,			\
+		.init_name = busid,				\
+		.platform_data = data,				\
+	}
+
+/*
+ * APB devices do not themselves have the ability to address memory,
+ * so DMA masks should be zero (much like USB peripheral devices.)
+ * The DMA controller DMA masks should be used instead (much like
+ * USB host controllers in conventional PCs.)
+ */
+#define AMBA_APB_DEVICE(name, busid, id, base, irqs, data)	\
+struct amba_device name##_device = {				\
+	.dev = __AMBA_DEV(busid, data, 0),			\
+	.res = DEFINE_RES_MEM(base, SZ_4K),			\
+	.irq = irqs,						\
+	.periphid = id,						\
+}
+
+/*
+ * AHB devices are DMA capable, so set their DMA masks
+ */
+#define AMBA_AHB_DEVICE(name, busid, id, base, irqs, data)	\
+struct amba_device name##_device = {				\
+	.dev = __AMBA_DEV(busid, data, ~0ULL),			\
+	.res = DEFINE_RES_MEM(base, SZ_4K),			\
+	.dma_mask = ~0ULL,					\
+	.irq = irqs,						\
+	.periphid = id,						\
+}
+
 #endif

include/linux/sh_intc.h

@@ -3,6 +3,23 @@
 
 #include <linux/ioport.h>
 
+#ifdef CONFIG_SUPERH
+#define INTC_NR_IRQS	512
+#else
+#define INTC_NR_IRQS	1024
+#endif
+
+/*
+ * Convert back and forth between INTEVT and IRQ values.
+ */
+#ifdef CONFIG_CPU_HAS_INTEVT
+#define evt2irq(evt)		(((evt) >> 5) - 16)
+#define irq2evt(irq)		(((irq) + 16) << 5)
+#else
+#define evt2irq(evt)		(evt)
+#define irq2evt(irq)		(irq)
+#endif
+
 typedef unsigned char intc_enum;
 
 struct intc_vect {

kernel/irq/Kconfig

@@ -13,7 +13,7 @@ config GENERIC_HARDIRQS
 # Options selectable by the architecture code
 
 # Make sparse irq Kconfig switch below available
-config HAVE_SPARSE_IRQ
+config MAY_HAVE_SPARSE_IRQ
        bool
 
 # Enable the generic irq autoprobe mechanism
@@ -61,8 +61,7 @@ config IRQ_FORCED_THREADING
        bool
 
 config SPARSE_IRQ
-	bool "Support sparse irq numbering"
-	depends on HAVE_SPARSE_IRQ
+	bool "Support sparse irq numbering" if MAY_HAVE_SPARSE_IRQ
 	---help---
 
 	  Sparse irq numbering is useful for distro kernels that want

sound/arm/pxa2xx-ac97-lib.c

@@ -21,7 +21,7 @@
 #include <sound/ac97_codec.h>
 #include <sound/pxa2xx-lib.h>
 
-#include <asm/irq.h>
+#include <mach/irqs.h>
 #include <mach/regs-ac97.h>
 #include <mach/audio.h>