Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "Device-tree updates for arm64 platforms. For the first time I can
  remember, this is actually larger than the corresponding branch for
  32-bit platforms overall, though that has more individual changes.

  A significant portion this time is due to added machine support:

   - Initial support for the Realtek RTD1295 SoC, along with the Zidoo
     X9S set-top-box

   - Initial support for Actions Semi S900 and the Bubblegum-96
     single-board-cёmputer.

   - Rockchips support for the rk3399-Firefly single-board-computer gets
     added, this one stands out for being relatively fast, affordable
     and well₋supported, compared to many boards that only fall into one
     or two of the above categories.

   - Mediatek gains support for the mt6797 mobile-phone SoC platform and
     corresponding evaluation board.

   - Amlogic board support gets added for the NanoPi K2 and S905x
     LibreTech CC single-board computers and the R-Box Pro set-top-box

   - Allwinner board support gets added for the OrangePi Win, Orangepi
     Zero Plus 2, NanoPi NEO2 and Orange Pi Prime single board computers
     and the SoPine system-on-module.

   - Renesas board support for Salvator-XS and H3ULCB automotive
     development systems.

   - Socionext Uniphier board support for LD11-global and LD20-global,
     whatever those may be.

   - Broadcom adds support for the new Stingray communication processor
     in its iProc family, along with two reference boards.

  Other updates include:

   - For the hisicon platform, support for Hi3660-Hikey960 gets extended
     significantly.

   - Lots of smaller updates for Renesas, Amlogic, Rockchip, UniPhier,
     Broadcom, Allwinner, Hisilicon, Qualcomm, Marvell, and NXP"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (243 commits)
  ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers
  Revert "arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k"
  arm64: dts: mediatek: don't include missing file
  ARM64: dts: meson-gxl: Add Libre Technology CC support
  dt-bindings: arm: amlogic: Add Libre Technology CC board
  dt-bindings: add Libre Technology vendor prefix
  arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K
  arm64: dts: zte: Use - instead of @ for DT OPP entries
  arm64: dts: marvell: add gpio support for Armada 7K/8K
  arm64: dts: marvell: add pinctrl support for Armada 7K/8K
  arm64: dts: marvell: use new binding for the system controller on cp110
  arm64: dts: marvell: remove *-clock-output-names on cp110
  arm64: dts: marvell: use new bindings for xor clocks on ap806
  arm64: dts: marvell: mcbin: enable the mdio node
  arm64: dts: Add Actions Semi S900 and Bubblegum-96
  dt-bindings: Add vendor prefix for uCRobotics
  arm64: dts: marvell: add xmdio nodes for 7k/8k
  arm64: dts: marvell: add a comment on the cp110 slave node status
  arm64: dts: marvell: remove cpm crypto nodes from dts files
  arm64: dts: marvell: cp110: enable the crypto engine at the SoC level
  ...

Documentation/devicetree/bindings/arm/amlogic.txt

@@ -29,26 +29,35 @@ Boards with the Amlogic Meson GXM S912 SoC shall have the following properties:
   Required root node property:
     compatible: "amlogic,s912", "amlogic,meson-gxm";
 
-Board compatible values:
+Board compatible values (alphabetically, grouped by SoC):
+
   - "geniatech,atv1200" (Meson6)
+
   - "minix,neo-x8" (Meson8)
-  - "tronfy,mxq" (Meson8b)
+
   - "hardkernel,odroid-c1" (Meson8b)
+  - "tronfy,mxq" (Meson8b)
+
+  - "amlogic,p200" (Meson gxbb)
+  - "amlogic,p201" (Meson gxbb)
+  - "friendlyarm,nanopi-k2" (Meson gxbb)
+  - "hardkernel,odroid-c2" (Meson gxbb)
+  - "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
   - "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb)
   - "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb)
   - "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb)
-  - "hardkernel,odroid-c2" (Meson gxbb)
-  - "amlogic,p200" (Meson gxbb)
-  - "amlogic,p201" (Meson gxbb)
   - "wetek,hub" (Meson gxbb)
   - "wetek,play2" (Meson gxbb)
+
   - "amlogic,p212" (Meson gxl s905x)
+  - "hwacom,amazetv" (Meson gxl s905x)
   - "khadas,vim" (Meson gxl s905x)
+  - "libretech,cc" (Meson gxl s905x)
 
   - "amlogic,p230" (Meson gxl s905d)
   - "amlogic,p231" (Meson gxl s905d)
-  - "hwacom,amazetv" (Meson gxl s905x)
+
   - "amlogic,q200" (Meson gxm s912)
   - "amlogic,q201" (Meson gxm s912)
-  - "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
+  - "kingnovel,r-box-pro" (Meson gxm S912)
   - "nexbox,a1" (Meson gxm s912)

Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt

+Broadcom Stingray device tree bindings
+------------------------------------------------
+
+Boards with Stingray shall have the following properties:
+
+Required root node property:
+
+Stingray Combo SVK board
+compatible = "brcm,bcm958742k", "brcm,stingray";
+
+Stingray SST100 board
+compatible = "brcm,bcm958742t", "brcm,stingray";

Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt

@@ -4,6 +4,10 @@ Hi3660 SoC
 Required root node properties:
 	- compatible = "hisilicon,hi3660";
 
+HiKey960 Board
+Required root node properties:
+	- compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
+
 Hi3798cv200 SoC
 Required root node properties:
 	- compatible = "hisilicon,hi3798cv200";

Documentation/devicetree/bindings/arm/mediatek.txt

@@ -12,6 +12,8 @@ compatible: Must contain one of
    "mediatek,mt6592"
    "mediatek,mt6755"
    "mediatek,mt6795"
+   "mediatek,mt6797"
+   "mediatek,mt7622"
    "mediatek,mt7623"
    "mediatek,mt8127"
    "mediatek,mt8135"
@@ -38,6 +40,12 @@ Supported boards:
 - Evaluation board for MT6795(Helio X10):
     Required root node properties:
       - compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
+- Evaluation board for MT6797(Helio X20):
+    Required root node properties:
+      - compatible = "mediatek,mt6797-evb", "mediatek,mt6797";
+- Reference board variant 1 for MT7622:
+    Required root node properties:
+      - compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
 - Evaluation board for MT7623:
     Required root node properties:
       - compatible = "mediatek,mt7623-evb", "mediatek,mt7623";

Documentation/devicetree/bindings/arm/realtek.txt

+Realtek platforms device tree bindings
+--------------------------------------
+
+
+RTD1295 SoC
+===========
+
+Required root node properties:
+
+ - compatible :  must contain "realtek,rtd1295"
+
+
+Root node property compatible must contain, depending on board:
+
+ - Zidoo X9S: "zidoo,x9s"
+
+
+Example:
+
+    compatible = "zidoo,x9s", "realtek,rtd1295";

Documentation/devicetree/bindings/arm/rockchip.txt

@@ -42,6 +42,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288";
 
+- Firefly Firefly-RK3399 board:
+    Required root node properties:
+      - compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
+
 - ChipSPARK PopMetal-RK3288 board:
     Required root node properties:
       - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";

Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt

@@ -3,7 +3,7 @@ Binding for Freescale QorIQ AHCI SATA Controller
 Required properties:
   - reg: Physical base address and size of the controller's register area.
   - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where
-    chip could be ls1021a, ls1043a, ls1046a, ls2080a etc.
+    chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a etc.
   - clocks: Input clock specifier. Refer to common clock bindings.
   - interrupts: Interrupt specifier. Refer to interrupt binding.
 

Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt

@@ -219,3 +219,79 @@ BCM63138
 --------
 PLL and leaf clock compatible strings for BCM63138 are:
     "brcm,bcm63138-armpll"
+
+Stingray
+-----------
+PLL and leaf clock compatible strings for Stingray are:
+    "brcm,sr-genpll0"
+    "brcm,sr-genpll1"
+    "brcm,sr-genpll2"
+    "brcm,sr-genpll3"
+    "brcm,sr-genpll4"
+    "brcm,sr-genpll5"
+    "brcm,sr-genpll6"
+
+    "brcm,sr-lcpll0"
+    "brcm,sr-lcpll1"
+    "brcm,sr-lcpll-pcie"
+
+
+The following table defines the set of PLL/clock index and ID for Stingray.
+These clock IDs are defined in:
+    "include/dt-bindings/clock/bcm-sr.h"
+
+    Clock		Source		Index	ID
+    ---			-----		-----	---------
+    crystal		N/A		N/A	N/A
+    crmu_ref25m		crystal		N/A	N/A
+
+    genpll0		crystal		0	BCM_SR_GENPLL0
+    clk_125m		genpll0		1	BCM_SR_GENPLL0_125M_CLK
+    clk_scr		genpll0		2	BCM_SR_GENPLL0_SCR_CLK
+    clk_250		genpll0		3	BCM_SR_GENPLL0_250M_CLK
+    clk_pcie_axi	genpll0		4	BCM_SR_GENPLL0_PCIE_AXI_CLK
+    clk_paxc_axi_x2	genpll0		5	BCM_SR_GENPLL0_PAXC_AXI_X2_CLK
+    clk_paxc_axi	genpll0		6	BCM_SR_GENPLL0_PAXC_AXI_CLK
+
+    genpll1		crystal		0	BCM_SR_GENPLL1
+    clk_pcie_tl		genpll1		1	BCM_SR_GENPLL1_PCIE_TL_CLK
+    clk_mhb_apb		genpll1		2	BCM_SR_GENPLL1_MHB_APB_CLK
+
+    genpll2		crystal		0	BCM_SR_GENPLL2
+    clk_nic		genpll2		1	BCM_SR_GENPLL2_NIC_CLK
+    clk_ts_500_ref	genpll2		2	BCM_SR_GENPLL2_TS_500_REF_CLK
+    clk_125_nitro	genpll2		3	BCM_SR_GENPLL2_125_NITRO_CLK
+    clk_chimp		genpll2		4	BCM_SR_GENPLL2_CHIMP_CLK
+    clk_nic_flash	genpll2		5	BCM_SR_GENPLL2_NIC_FLASH
+
+    genpll3		crystal		0	BCM_SR_GENPLL3
+    clk_hsls		genpll3		1	BCM_SR_GENPLL3_HSLS_CLK
+    clk_sdio		genpll3		2	BCM_SR_GENPLL3_SDIO_CLK
+
+    genpll4		crystal		0	BCM_SR_GENPLL4
+    ccn			genpll4		1	BCM_SR_GENPLL4_CCN_CLK
+    clk_tpiu_pll	genpll4		2	BCM_SR_GENPLL4_TPIU_PLL_CLK
+    noc_clk		genpll4		3	BCM_SR_GENPLL4_NOC_CLK
+    clk_chclk_fs4	genpll4		4	BCM_SR_GENPLL4_CHCLK_FS4_CLK
+    clk_bridge_fscpu	genpll4		5	BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK
+
+
+    genpll5		crystal		0	BCM_SR_GENPLL5
+    fs4_hf_clk		genpll5		1	BCM_SR_GENPLL5_FS4_HF_CLK
+    crypto_ae_clk	genpll5		2	BCM_SR_GENPLL5_CRYPTO_AE_CLK
+    raid_ae_clk		genpll5		3	BCM_SR_GENPLL5_RAID_AE_CLK
+
+    genpll6		crystal		0	BCM_SR_GENPLL6
+    48_usb		genpll6		1	BCM_SR_GENPLL6_48_USB_CLK
+
+    lcpll0		crystal		0	BCM_SR_LCPLL0
+    clk_sata_refp 	lcpll0		1	BCM_SR_LCPLL0_SATA_REFP_CLK
+    clk_sata_refn	lcpll0		2	BCM_SR_LCPLL0_SATA_REFN_CLK
+    clk_usb_ref		lcpll0		3	BCM_SR_LCPLL0_USB_REF_CLK
+    sata_refpn		lcpll0		3	BCM_SR_LCPLL0_SATA_REFPN_CLK
+
+    lcpll1		crystal		0	BCM_SR_LCPLL1
+    wan 		lcpll1		1	BCM_SR_LCPLL0_WAN_CLK
+
+    lcpll_pcie		crystal		0	BCM_SR_LCPLL_PCIE
+    pcie_phy_ref 	lcpll1		1	BCM_SR_LCPLL_PCIE_PHY_REF_CLK

Documentation/devicetree/bindings/i2c/i2c-mt6577.txt → Documentation/devicetree/bindings/i2c/i2c-mtk.txt

@@ -4,11 +4,11 @@ The Mediatek's I2C controller is used to interface with I2C devices.
 
 Required properties:
   - compatible: value should be either of the following.
-      (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c.
-      (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c.
-      (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c.
-      (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c.
-      (e) "mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c.
+      "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for Mediatek mt2701
+      "mediatek,mt6577-i2c": for i2c compatible with mt6577.
+      "mediatek,mt6589-i2c": for i2c compatible with mt6589.
+      "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for i2c compatible with mt7623.
+      "mediatek,mt8173-i2c": for i2c compatible with mt8173.
   - reg: physical base address of the controller and dma base, length of memory
     mapped region.
   - interrupts: interrupt number to the cpu.

Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt

-+Mediatek 65xx/67xx/81xx sysirq
++Mediatek MT65xx/MT67xx/MT81xx sysirq
 
 Mediatek SOCs sysirq support controllable irq inverter for each GIC SPI
 interrupt.
 
 Required properties:
-- compatible: should be one of:
-	"mediatek,mt8173-sysirq"
-	"mediatek,mt8135-sysirq"
-	"mediatek,mt8127-sysirq"
-	"mediatek,mt6795-sysirq"
-	"mediatek,mt6755-sysirq"
-	"mediatek,mt6592-sysirq"
-	"mediatek,mt6589-sysirq"
-	"mediatek,mt6582-sysirq"
-	"mediatek,mt6580-sysirq"
-	"mediatek,mt6577-sysirq"
-	"mediatek,mt2701-sysirq"
+- compatible: should be
+	"mediatek,mt8173-sysirq", "mediatek,mt6577-sysirq": for MT8173
+	"mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135
+	"mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127
+	"mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622
+	"mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795
+	"mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797
+	"mediatek,mt6755-sysirq", "mediatek,mt6577-sysirq": for MT6755
+	"mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq": for MT6592
+	"mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq": for MT6589
+	"mediatek,mt6582-sysirq", "mediatek,mt6577-sysirq": for MT6582
+	"mediatek,mt6580-sysirq", "mediatek,mt6577-sysirq": for MT6580
+	"mediatek,mt6577-sysirq": for MT6577
+	"mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq": for MT2701
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
 - interrupt-parent: phandle of irq parent for sysirq. The parent must

Documentation/devicetree/bindings/mfd/hi6421.txt

 * HI6421 Multi-Functional Device (MFD), by HiSilicon Ltd.
 
 Required parent device properties:
-- compatible	: contains "hisilicon,hi6421-pmic";
+- compatible    : One of the following chip-specific strings:
+	"hisilicon,hi6421-pmic";
+	"hisilicon,hi6421v530-pmic";
 - reg		: register range space of hi6421;
 
 Supported Hi6421 sub-devices include:

Documentation/devicetree/bindings/mmc/fsl-esdhc.txt

@@ -7,6 +7,20 @@ This file documents differences between the core properties described
 by mmc.txt and the properties used by the sdhci-esdhc driver.
 
 Required properties:
+  - compatible : should be "fsl,esdhc", or "fsl,<chip>-esdhc".
+    Possible compatibles for PowerPC:
+	"fsl,mpc8536-esdhc"
+	"fsl,mpc8378-esdhc"
+	"fsl,p2020-esdhc"
+	"fsl,p4080-esdhc"
+	"fsl,t1040-esdhc"
+	"fsl,t4240-esdhc"
+    Possible compatibles for ARM:
+	"fsl,ls1012a-esdhc"
+	"fsl,ls1088a-esdhc"
+	"fsl,ls1043a-esdhc"
+	"fsl,ls1046a-esdhc"
+	"fsl,ls2080a-esdhc"
   - interrupt-parent : interrupt source phandle.
   - clock-frequency : specifies eSDHC base clock frequency.
 

Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt

@@ -12,6 +12,7 @@ extensions to the Synopsys Designware Mobile Storage Host Controller.
 Required Properties:
 
 * compatible: should be one of the following.
+  - "hisilicon,hi3660-dw-mshc": for controllers with hi3660 specific extensions.
   - "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extensions.
   - "hisilicon,hi6220-dw-mshc": for controllers with hi6220 specific extensions.
 

Documentation/devicetree/bindings/pci/kirin-pcie.txt

+HiSilicon Kirin SoCs PCIe host DT description
+
+Kirin PCIe host controller is based on Designware PCI core.
+It shares common functions with PCIe Designware core driver
+and inherits common properties defined in
+Documentation/devicetree/bindings/pci/designware-pci.txt.
+
+Additional properties are described here:
+
+Required properties
+- compatible:
+	"hisilicon,kirin960-pcie" for PCIe of Kirin960 SoC
+- reg: Should contain rc_dbi, apb, phy, config registers location and length.
+- reg-names: Must include the following entries:
+  "dbi": controller configuration registers;
+  "apb": apb Ctrl register defined by Kirin;
+  "phy": apb PHY register defined by Kirin;
+  "config": PCIe configuration space registers.
+- reset-gpios: The gpio to generate PCIe perst assert and deassert signal.
+
+Optional properties:
+
+Example based on kirin960:
+
+	pcie@f4000000 {
+		compatible = "hisilicon,kirin-pcie";
+		reg = <0x0 0xf4000000 0x0 0x1000>, <0x0 0xff3fe000 0x0 0x1000>,
+		      <0x0 0xf3f20000 0x0 0x40000>, <0x0 0xF4000000 0 0x2000>;
+		reg-names = "dbi","apb","phy", "config";
+		bus-range = <0x0  0x1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x02000000 0x0 0x00000000 0x0 0xf5000000 0x0 0x2000000>;
+		num-lanes = <1>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0x0 0 0 1 &gic 0 0 0  282 4>,
+				<0x0 0 0 2 &gic 0 0 0  283 4>,
+				<0x0 0 0 3 &gic 0 0 0  284 4>,
+				<0x0 0 0 4 &gic 0 0 0  285 4>;
+		clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+			 <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+			 <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+			 <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+			 <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+		clock-names = "pcie_phy_ref", "pcie_aux",
+			      "pcie_apb_phy", "pcie_apb_sys", "pcie_aclk";
+		reset-gpios = <&gpio11 1 0 >;
+	};

Documentation/devicetree/bindings/serial/mtk-uart.txt

@@ -8,6 +8,8 @@ Required properties:
   * "mediatek,mt6589-uart" for MT6589 compatible UARTS
   * "mediatek,mt6755-uart" for MT6755 compatible UARTS
   * "mediatek,mt6795-uart" for MT6795 compatible UARTS
+  * "mediatek,mt6797-uart" for MT6797 compatible UARTS
+  * "mediatek,mt7622-uart" for MT7622 compatible UARTS
   * "mediatek,mt7623-uart" for MT7623 compatible UARTS
   * "mediatek,mt8127-uart" for MT8127 compatible UARTS
   * "mediatek,mt8135-uart" for MT8135 compatible UARTS

Documentation/devicetree/bindings/soc/mediatek/scpsys.txt

@@ -9,11 +9,14 @@ domain control.
 
 The driver implements the Generic PM domain bindings described in
 power/power_domain.txt. It provides the power domains defined in
-include/dt-bindings/power/mt8173-power.h and mt2701-power.h.
+- include/dt-bindings/power/mt8173-power.h
+- include/dt-bindings/power/mt6797-power.h
+- include/dt-bindings/power/mt2701-power.h
 
 Required properties:
 - compatible: Should be one of:
 	- "mediatek,mt2701-scpsys"
+	- "mediatek,mt6797-scpsys"
 	- "mediatek,mt8173-scpsys"
 - #power-domain-cells: Must be 1
 - reg: Address range of the SCPSYS unit
@@ -22,6 +25,7 @@ Required properties:
                       These are clocks which hardware needs to be
                       enabled before enabling certain power domains.
 	Required clocks for MT2701: "mm", "mfg", "ethif"
+	Required clocks for MT6797: "mm", "mfg", "vdec"
 	Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt"
 
 Optional properties:

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -166,6 +166,7 @@ keithkoep	Keith & Koep GmbH
 keymile	Keymile GmbH
 khadas	Khadas
 kinetic Kinetic Technologies
+kingnovel	Kingnovel Technology Co., Ltd.
 kosagi	Sutajio Ko-Usagi PTE Ltd.
 kyo	Kyocera Corporation
 lacie	LaCie
@@ -173,6 +174,7 @@ lantiq	Lantiq Semiconductor
 lego	LEGO Systems A/S
 lenovo	Lenovo Group Ltd.
 lg	LG Corporation
+libretech	Shenzhen Libre Technology Co., Ltd
 licheepi	Lichee Pi
 linaro	Linaro Limited
 linux	Linux-specific binding
@@ -332,6 +334,7 @@ tronfy	Tronfy
 tronsmart	Tronsmart
 truly	Truly Semiconductors Limited
 tyan	Tyan Computer Corporation
+ucrobotics	uCRobotics
 udoo	Udoo
 uniwest	United Western Technologies Corp (UniWest)
 upisemi	uPI Semiconductor Corp.
@@ -357,6 +360,7 @@ xlnx	Xilinx
 xunlong	Shenzhen Xunlong Software CO.,Limited
 zarlink	Zarlink Semiconductor
 zeitec	ZEITEC Semiconductor Co., LTD.
+zidoo	Shenzhen Zidoo Technology Co., Ltd.
 zii	Zodiac Inflight Innovations
 zte	ZTE Corp.
 zyxel	ZyXEL Communications Corp.

arch/arm64/boot/dts/Makefile

+dts-dirs += actions
 dts-dirs += al
 dts-dirs += allwinner
 dts-dirs += altera
@@ -14,6 +15,7 @@ dts-dirs += marvell
 dts-dirs += mediatek
 dts-dirs += nvidia
 dts-dirs += qcom
+dts-dirs += realtek
 dts-dirs += renesas
 dts-dirs += rockchip
 dts-dirs += socionext

arch/arm64/boot/dts/actions/Makefile

+dtb-$(CONFIG_ARCH_ACTIONS) += s900-bubblegum-96.dtb
+
+always		:= $(dtb-y)
+subdir-y	:= $(dts-dirs)
+clean-files	:= *.dtb

arch/arm64/boot/dts/actions/s900-bubblegum-96.dts

+/*
+ * Copyright (c) 2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "s900.dtsi"
+
+/ {
+	compatible = "ucrobotics,bubblegum-96", "actions,s900";
+	model = "Bubblegum-96";
+
+	aliases {
+		serial5 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial5:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart5 {
+	status = "okay";
+};

arch/arm64/boot/dts/actions/s900.dtsi

+/*
+ * Copyright (c) 2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "actions,s900";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secmon@1f000000 {
+			reg = <0x0 0x1f000000 0x0 0x1000000>;
+			no-map;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	hosc: hosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@e00f1000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xe00f1000 0x0 0x1000>,
+			      <0x0 0xe00f2000 0x0 0x2000>,
+			      <0x0 0xe00f4000 0x0 0x2000>,
+			      <0x0 0xe00f6000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		uart0: serial@e0120000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0120000 0x0 0x2000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial@e0122000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0122000 0x0 0x2000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart2: serial@e0124000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0124000 0x0 0x2000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart3: serial@e0126000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0126000 0x0 0x2000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart4: serial@e0128000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0128000 0x0 0x2000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart5: serial@e012a000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012a000 0x0 0x2000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart6: serial@e012c000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012c000 0x0 0x2000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		timer: timer@e0228000 {
+			compatible = "actions,s900-timer";
+			reg = <0x0 0xe0228000 0x0 0x8000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "timer1";
+		};
+	};
+};

arch/arm64/boot/dts/allwinner/Makefile

 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)

arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts

@@ -67,6 +67,14 @@
 	};
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	status = "okay";
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
@@ -77,6 +85,13 @@
 	bias-pull-up;
 };
 
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;

arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts

+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi Win/Win Plus";
+	compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+

arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts

@@ -46,5 +46,20 @@
 	model = "Pine64+";
 	compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
 
-	/* TODO: Camera, Ethernet PHY, touchscreen, etc. */
+	/* TODO: Camera, touchscreen, etc. */
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
 };

arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts

@@ -52,6 +52,10 @@
 
 	aliases {
 		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
 	};
 
 	chosen {
@@ -66,10 +70,23 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &ehci1 {
 	status = "okay";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	phy-mode = "rmii";
+	phy-handle = <&ext_rmii_phy1>;
+	status = "okay";
+
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
@@ -80,6 +97,13 @@
 	bias-pull-up;
 };
 
+&mdio {
+	ext_rmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
@@ -91,16 +115,49 @@
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &ohci1 {
 	status = "okay";
 };
 
+/* On Exp and Euler connectors */
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
 	status = "okay";
 };
 
+/* On Wifi/BT connector, with RTS/CTS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	status = "disabled";
+};
+
+/* On Pi-2 connector */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+/* On Euler connector */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+/* On Euler connector, RTS/CTS optional */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "disabled";
+};
+
 &usb_otg {
 	dr_mode = "host";
 	status = "okay";

arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts

+/*
+ * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun50i-a64-pine64.dts, which is:
+ *   Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64-sopine.dtsi"
+
+/ {
+	model = "SoPine with baseboard";
+	compatible = "pine64,sopine-baseboard", "pine64,sopine",
+		     "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc1v8: vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};

arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi

+/*
+ * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun50i-a64-pine64.dts, which is:
+ *   Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun50i-a64.dtsi"
+
+/ {
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	non-removable;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi

@@ -43,6 +43,7 @@
  */
 
 #include <dt-bindings/clock/sun50i-a64-ccu.h>
+#include <dt-bindings/clock/sun8i-r-ccu.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/sun50i-a64-ccu.h>
 
@@ -129,6 +130,12 @@
 		#size-cells = <1>;
 		ranges;
 
+		syscon: syscon@1c00000 {
+			compatible = "allwinner,sun50i-a64-system-controller",
+				"syscon";
+			reg = <0x01c00000 0x1000>;
+		};
+
 		mmc0: mmc@1c0f000 {
 			compatible = "allwinner,sun50i-a64-mmc";
 			reg = <0x01c0f000 0x1000>;
@@ -204,6 +211,28 @@
 			#phy-cells = <1>;
 		};
 
+		ehci0: usb@01c1a000 {
+			compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			status = "disabled";
+		};
+
+		ohci0: usb@01c1a400 {
+			compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			status = "disabled";
+		};
+
 		ehci1: usb@01c1b000 {
 			compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
 			reg = <0x01c1b000 0x100>;
@@ -281,6 +310,21 @@
 				bias-pull-up;
 			};
 
+			rmii_pins: rmii_pins {
+				pins = "PD10", "PD11", "PD13", "PD14", "PD17",
+				       "PD18", "PD19", "PD20", "PD22", "PD23";
+				function = "emac";
+				drive-strength = <40>;
+			};
+
+			rgmii_pins: rgmii_pins {
+				pins = "PD8", "PD9", "PD10", "PD11", "PD12",
+				       "PD13", "PD15", "PD16", "PD17", "PD18",
+				       "PD19", "PD20", "PD21", "PD22", "PD23";
+				function = "emac";
+				drive-strength = <40>;
+			};
+
 			uart0_pins_a: uart0@0 {
 				pins = "PB8", "PB9";
 				function = "uart0";
@@ -295,6 +339,26 @@
 				pins = "PG8", "PG9";
 				function = "uart1";
 			};
+
+			uart2_pins: uart2-pins {
+				pins = "PB0", "PB1";
+				function = "uart2";
+			};
+
+			uart3_pins: uart3-pins {
+				pins = "PD0", "PD1";
+				function = "uart3";
+			};
+
+			uart4_pins: uart4-pins {
+				pins = "PD2", "PD3";
+				function = "uart4";
+			};
+
+			uart4_rts_cts_pins: uart4-rts-cts-pins {
+				pins = "PD4", "PD5";
+				function = "uart4";
+			};
 		};
 
 		uart0: serial@1c28000 {
@@ -303,8 +367,8 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 67>;
-			resets = <&ccu 46>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
 
@@ -314,8 +378,8 @@
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 68>;
-			resets = <&ccu 47>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
 			status = "disabled";
 		};
 
@@ -325,8 +389,8 @@
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 69>;
-			resets = <&ccu 48>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
 			status = "disabled";
 		};
 
@@ -336,8 +400,8 @@
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 70>;
-			resets = <&ccu 49>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
 			status = "disabled";
 		};
 
@@ -347,8 +411,8 @@
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 71>;
-			resets = <&ccu 50>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
 			status = "disabled";
 		};
 
@@ -356,8 +420,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu 63>;
-			resets = <&ccu 42>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -367,8 +431,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu 64>;
-			resets = <&ccu 43>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -378,11 +442,31 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu 65>;
-			resets = <&ccu 44>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun50i-a64-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x100>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		gic: interrupt-controller@1c81000 {
@@ -417,12 +501,31 @@
 			compatible = "allwinner,sun50i-a64-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
+			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
+
+			r_rsb_pins: rsb@0 {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+			};
+		};
+
+		r_rsb: rsb@1f03400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu 6>;
+			clock-frequency = <3000000>;
+			resets = <&r_ccu 2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 	};
 };

arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts

+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "FriendlyARM NanoPi NEO 2";
+	compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status {
+			label = "nanopi:blue:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+		status = "okay";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A port's VBUS is always on */
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};

arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts

@@ -59,6 +59,7 @@
 	};
 
 	aliases {
+		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -91,6 +92,16 @@
 		};
 	};
 
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
 	reg_usb0_vbus: usb0-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb0-vbus";
@@ -126,12 +137,28 @@
 	status = "okay";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
 	status = "okay";
 };
 
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;

arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts

+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun50i-h5-orangepi-pc2.dts, which is:
+ *   Copyright (C) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi Prime";
+	compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	r-gpio-keys {
+		compatible = "gpio-keys";
+
+		sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+		status = "okay";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A ports' VBUS is always on */
+	usb0_id_det-gpios = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};

arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts

+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi Zero Plus2";
+	compatible = "xunlong,orangepi-zero-plus2", "allwinner,sun50i-h5";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};

arch/arm64/boot/dts/amlogic/Makefile

+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p200.dtb
@@ -7,15 +8,17 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)

arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi

@@ -121,19 +121,42 @@
 	};
 };
 
-/* This UART is brought out to the DB9 connector */
-&uart_AO {
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
 	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
 	pinctrl-names = "default";
 };
 
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
 	pinctrl-names = "default";
 };
 
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
 /* Wireless SDIO Module */
 &sd_emmc_a {
 	status = "okay";
@@ -154,7 +177,7 @@
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
@@ -198,32 +221,9 @@
 	vqmmc-supply = <&vddio_boot>;
 };
 
-&pwm_ef {
-	status = "okay";
-	pinctrl-0 = <&pwm_e_pins>;
-	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
-};
-
-&ethmac {
-	status = "okay";
-};
-
-&cvbs_vdac_port {
-	cvbs_vdac_out: endpoint {
-		remote-endpoint = <&cvbs_connector_in>;
-	};
-};
-
-&hdmi_tx {
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
 	status = "okay";
-	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };
-
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};

arch/arm64/boot/dts/amlogic/meson-gx.dtsi

@@ -200,7 +200,7 @@
 		};
 
 		scpi_sensors: sensors {
-			compatible = "arm,scpi-sensors";
+			compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
 			#thermal-sensor-cells = <1>;
 		};
 	};
@@ -304,6 +304,15 @@
 				status = "disabled";
 			};
 
+			spicc: spi@8d80 {
+				compatible = "amlogic,meson-gx-spicc";
+				reg = <0x0 0x08d80 0x0 0x80>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			spifc: spi@8c80 {
 				compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc";
 				reg = <0x0 0x08c80 0x0 0x80>;

arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts

+/*
+ * Copyright (c) 2017 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		stat {
+			label = "nanopi-k2:blue:stat";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	vdd_5v: regulator-vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vddio_ao18: regulator-vddio-ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddio_ao3v3: regulator-vddio-ao3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_tf: regulator-vddio-tf {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_TF";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+		         <1800000 1>;
+	};
+
+	wifi_32k: wifi-32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi_32k>;
+		clock-names = "ext_clock";
+	};
+
+	vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	amlogic,tx-delay-ns = <2>;
+
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+		};
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>, <&sdio_irq_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <200000000>;
+
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddio_ao3v3>;
+	vqmmc-supply = <&vddio_ao18>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+/* SD */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+
+	vmmc-supply = <&vddio_ao3v3>;
+	vqmmc-supply = <&vddio_tf>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "disabled";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-sd-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc3v3>;
+	vqmmc-supply = <&vcc1v8>;
+};
+
+/* DBG_UART */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+/* Bluetooth on AP6212 */
+&uart_A {
+	status = "disabled";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+};
+
+/* 40-pin CON1 */
+&uart_C {
+	status = "disabled";
+	pinctrl-0 = <&uart_c_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&vdd_5v>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts

@@ -165,10 +165,10 @@
 	};
 };
 
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
 };
 
 &ethmac {
@@ -195,12 +195,32 @@
 	};
 };
 
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
 	pinctrl-names = "default";
 };
 
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
 /* Wireless SDIO Module */
 &sd_emmc_a {
 	status = "okay";
@@ -260,28 +280,8 @@
 	vqmmc-supply = <&vddio_boot>;
 };
 
-&pwm_ef {
-	status = "okay";
-	pinctrl-0 = <&pwm_e_pins>;
-	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
-};
-
-&cvbs_vdac_port {
-	cvbs_vdac_out: endpoint {
-		remote-endpoint = <&cvbs_connector_in>;
-	};
-};
-
-&hdmi_tx {
+&uart_AO {
 	status = "okay";
-	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };
-
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};

arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts

@@ -137,16 +137,6 @@
 	};
 };
 
-&scpi_clocks {
-	status = "disabled";
-};
-
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
 &ethmac {
 	status = "okay";
 	pinctrl-0 = <&eth_rgmii_pins>;
@@ -172,6 +162,33 @@
 	};
 };
 
+&gpio_ao {
+	/*
+	 * WARNING: The USB Hub on the Odroid-C2 needs a reset signal
+	 * to be turned high in order to be detected by the USB Controller
+	 * This signal should be handled by a USB specific power sequence
+	 * in order to reset the Hub when USB bus is powered down.
+	 */
+	usb-hub {
+		gpio-hog;
+		gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
 &pinctrl_aobus {
 	gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En",
 			  "USB HUB nRESET", "USB OTG Power En",
@@ -223,55 +240,15 @@
 			  "";
 };
 
-&ir {
-	status = "okay";
-	pinctrl-0 = <&remote_input_ao_pins>;
-	pinctrl-names = "default";
-};
-
-&i2c_A {
-	status = "okay";
-	pinctrl-0 = <&i2c_a_pins>;
-	pinctrl-names = "default";
-};
-
-&gpio_ao {
-	/*
-	 * WARNING: The USB Hub on the Odroid-C2 needs a reset signal
-	 * to be turned high in order to be detected by the USB Controller
-	 * This signal should be handled by a USB specific power sequence
-	 * in order to reset the Hub when USB bus is powered down.
-	 */
-	usb-hub {
-		gpio-hog;
-		gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-hub-reset";
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-	phy-supply = <&usb_otg_pwr>;
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
 &saradc {
 	status = "okay";
 	vref-supply = <&vcc1v8>;
 };
 
+&scpi_clocks {
+	status = "disabled";
+};
+
 /* SD */
 &sd_emmc_b {
 	status = "okay";
@@ -309,3 +286,26 @@
 	vmmc-supply = <&vcc3v3>;
 	vqmmc-supply = <&vcc1v8>;
 };
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_otg_pwr>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi

@@ -126,7 +126,7 @@
 		clock-names = "ext_clock";
 	};
 
-	cvbs-connector {
+	cvbs_connector: cvbs-connector {
 		compatible = "composite-video-connector";
 
 		port {
@@ -148,34 +148,36 @@
 	};
 };
 
-/* This UART is brought out to the DB9 connector */
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
 };
 
-&ir {
+&hdmi_tx {
 	status = "okay";
-	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
 	pinctrl-names = "default";
 };
 
-&usb0_phy {
-	status = "okay";
-	phy-supply = <&usb_pwr>;
-};
-
-&usb1_phy {
-	status = "okay";
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
 };
 
-&usb0 {
+&ir {
 	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
 };
 
-&usb1 {
+&pwm_ef {
 	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
 };
 
 /* Wireless SDIO Module */
@@ -198,7 +200,7 @@
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
@@ -242,28 +244,26 @@
 	vqmmc-supply = <&vddio_boot>;
 };
 
-&pwm_ef {
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
 	status = "okay";
-	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
-&cvbs_vdac_port {
-	cvbs_vdac_out: endpoint {
-		remote-endpoint = <&cvbs_connector_in>;
-	};
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_pwr>;
 };
 
-&hdmi_tx {
+&usb1_phy {
 	status = "okay";
-	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
-	pinctrl-names = "default";
 };
 
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
 };

arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi

@@ -111,18 +111,6 @@
 	};
 };
 
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-&ir {
-	status = "okay";
-	pinctrl-0 = <&remote_input_ao_pins>;
-	pinctrl-names = "default";
-};
-
 &ethmac {
 	status = "okay";
 	pinctrl-0 = <&eth_rgmii_pins>;
@@ -149,21 +137,18 @@
 	};
 };
 
-&usb0_phy {
-	status = "okay";
-	phy-supply = <&usb_vbus>;
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
+&ir {
 	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
 };
 
-&usb1 {
+&pwm_ef {
 	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
 };
 
 /* Wireless SDIO Module */
@@ -186,7 +171,7 @@
 	vmmc-supply = <&vcc_3v3>;
 	vqmmc-supply = <&vcc_1v8>;
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
@@ -229,10 +214,25 @@
 	vmmcq-sumpply = <&vcc_1v8>;
 };
 
-&pwm_ef {
+&uart_AO {
 	status = "okay";
-	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_vbus>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
 };

arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts

@@ -59,10 +59,10 @@
 			panic-indicator;
 		};
 	};
+};
 
-	cvbs-connector {
-		status = "disabled";
-	};
+&cvbs_connector {
+	status = "disabled";
 };
 
 &ethmac {

arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts

@@ -85,6 +85,34 @@
 			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
 };
 
 &ethmac {
@@ -113,6 +141,18 @@
 	};
 };
 
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &i2c_A {
 	status = "okay";
 	pinctrl-0 = <&i2c_a_pins>;

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

@@ -97,13 +97,6 @@
 	};
 };
 
-&ethmac {
-	clocks = <&clkc CLKID_ETH>,
-		 <&clkc CLKID_FCLK_DIV2>,
-		 <&clkc CLKID_MPLL2>;
-	clock-names = "stmmaceth", "clkin0", "clkin1";
-};
-
 &aobus {
 	pinctrl_aobus: pinctrl@14 {
 		compatible = "amlogic,meson-gxbb-aobus-pinctrl";
@@ -249,9 +242,119 @@
 				function = "spdif_out_ao";
 			};
 		};
+
+		ao_cec_pins: ao_cec {
+			mux {
+				groups = "ao_cec";
+				function = "cec_ao";
+			};
+		};
+
+		ee_cec_pins: ee_cec {
+			mux {
+				groups = "ee_cec";
+				function = "cec_ao";
+			};
+		};
+	};
+};
+
+&apb {
+	mali: gpu@c0000 {
+		compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+		reg = <0x0 0xc0000 0x0 0x40000>;
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp", "gpmmu", "pp", "pmu",
+			"pp0", "ppmmu0", "pp1", "ppmmu1",
+			"pp2", "ppmmu2";
+		clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+		clock-names = "bus", "core";
+
+		/*
+		 * Mali clocking is provided by two identical clock paths
+		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
+		 * free mux to safely change frequency while running.
+		 */
+		assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+				  <&clkc CLKID_MALI_0>,
+				  <&clkc CLKID_MALI>; /* Glitch free mux */
+		assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+					 <0>, /* Do Nothing */
+					 <&clkc CLKID_MALI_0>;
+		assigned-clock-rates = <0>, /* Do Nothing */
+				       <666666666>,
+				       <0>; /* Do Nothing */
+	};
+};
+
+&cbus {
+	spifc: spi@8c80 {
+		compatible = "amlogic,meson-gxbb-spifc";
+		reg = <0x0 0x08c80 0x0 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkc CLKID_SPI>;
+		status = "disabled";
+	};
+};
+
+&ethmac {
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_FCLK_DIV2>,
+		 <&clkc CLKID_MPLL2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1";
+};
+
+&hdmi_tx {
+	compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+	resets = <&reset RESET_HDMITX_CAPB3>,
+		 <&reset RESET_HDMI_SYSTEM_RESET>,
+		 <&reset RESET_HDMI_TX>;
+	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+	clock-names = "isfr", "iahb", "venci";
+};
+
+&hiubus {
+	clkc: clock-controller@0 {
+		compatible = "amlogic,gxbb-clkc";
+		#clock-cells = <1>;
+		reg = <0x0 0x0 0x0 0x3db>;
 	};
 };
 
+&hwrng {
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_AO_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+	clocks = <&clkc CLKID_I2C>;
+};
+
 &periphs {
 	pinctrl_periphs: pinctrl@4b0 {
 		compatible = "amlogic,meson-gxbb-periphs-pinctrl";
@@ -262,7 +365,7 @@
 		gpio: bank@4b0 {
 			reg = <0x0 0x004b0 0x0 0x28>,
 			      <0x0 0x004e8 0x0 0x14>,
-			      <0x0 0x00120 0x0 0x14>,
+			      <0x0 0x00520 0x0 0x14>,
 			      <0x0 0x00430 0x0 0x40>;
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
@@ -290,6 +393,22 @@
 			};
 		};
 
+		spi_pins: spi {
+			mux {
+				groups = "spi_miso",
+					"spi_mosi",
+					"spi_sclk";
+				function = "spi";
+			};
+		};
+
+		spi_ss0_pins: spi-ss0 {
+			mux {
+				groups = "spi_ss0";
+				function = "spi";
+			};
+		};
+
 		sdcard_pins: sdcard {
 			mux {
 				groups = "sdcard_d0",
@@ -521,67 +640,6 @@
 	};
 };
 
-&hiubus {
-	clkc: clock-controller@0 {
-		compatible = "amlogic,gxbb-clkc";
-		#clock-cells = <1>;
-		reg = <0x0 0x0 0x0 0x3db>;
-	};
-};
-
-&apb {
-	mali: gpu@c0000 {
-		compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
-		reg = <0x0 0xc0000 0x0 0x40000>;
-		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "gp", "gpmmu", "pp", "pmu",
-			"pp0", "ppmmu0", "pp1", "ppmmu1",
-			"pp2", "ppmmu2";
-		clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
-		clock-names = "bus", "core";
-
-		/*
-		 * Mali clocking is provided by two identical clock paths
-		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
-		 * free mux to safely change frequency while running.
-		 */
-		assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
-				  <&clkc CLKID_MALI_0>,
-				  <&clkc CLKID_MALI>; /* Glitch free mux */
-		assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
-					 <0>, /* Do Nothing */
-					 <&clkc CLKID_MALI_0>;
-		assigned-clock-rates = <0>, /* Do Nothing */
-				       <666666666>,
-				       <0>; /* Do Nothing */
-	};
-};
-
-&i2c_A {
-	clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_AO {
-	clocks = <&clkc CLKID_AO_I2C>;
-};
-
-&i2c_B {
-	clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_C {
-	clocks = <&clkc CLKID_I2C>;
-};
-
 &saradc {
 	compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
 	clocks = <&xtal>,
@@ -613,6 +671,13 @@
 	clock-names = "core", "clkin0", "clkin1";
 };
 
+&spicc {
+	clocks = <&clkc CLKID_SPICC>;
+	clock-names = "core";
+	resets = <&reset RESET_PERIPHS_SPICC>;
+	num-cs = <1>;
+};
+
 &spifc {
 	clocks = <&clkc CLKID_SPI>;
 };
@@ -620,20 +685,3 @@
 &vpu {
 	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
 };
-
-&hwrng {
-	clocks = <&clkc CLKID_RNG0>;
-	clock-names = "core";
-};
-
-&hdmi_tx {
-	compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
-	resets = <&reset RESET_HDMITX_CAPB3>,
-		 <&reset RESET_HDMI_SYSTEM_RESET>,
-		 <&reset RESET_HDMI_TX>;
-	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
-	clocks = <&clkc CLKID_HDMI_PCLK>,
-		 <&clkc CLKID_CLK81>,
-		 <&clkc CLKID_GCLK_VENCI_INT0>;
-	clock-names = "isfr", "iahb", "venci";
-};

arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts

@@ -84,6 +84,17 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
 };
 
 /* P230 has exclusive choice between internal or external PHY */
@@ -113,6 +124,19 @@
 	};
 };
 
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &saradc {
 	status = "okay";
 	vref-supply = <&vddio_ao18>;

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts

@@ -54,6 +54,29 @@
 			linux,default-trigger = "default-on";
 		};
 	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
 };
 
 &i2c_A {
@@ -95,7 +118,7 @@
 };
 
 &sd_emmc_a {
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts

+/*
+ * Copyright (c) 2017 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "meson-gxl-s905x-p212.dtsi"
+
+/ {
+	compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "Libre Technology CC";
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "librecomputer:system-status";
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+
+		blue {
+			label = "librecomputer:blue";
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+/*
+ * The following devices exists but are exposed on the general
+ * purpose GPIO header. End user may well decide to use those pins
+ * for another purpose
+ */
+
+&sd_emmc_a {
+	status = "disabled";
+};
+
+&uart_A {
+	status = "disabled";
+};
+
+&wifi32k {
+	status = "disabled";
+};

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts

@@ -140,10 +140,10 @@
 	};
 };
 
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
 };
 
 &ethmac {
@@ -152,12 +152,32 @@
 	phy-handle = <&internal_phy>;
 };
 
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
 	pinctrl-names = "default";
 };
 
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
 /* Wireless SDIO Module */
 &sd_emmc_a {
 	status = "okay";
@@ -217,28 +237,8 @@
 	vqmmc-supply = <&vddio_boot>;
 };
 
-&pwm_ef {
-	status = "okay";
-	pinctrl-0 = <&pwm_e_pins>;
-	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
-};
-
-&cvbs_vdac_port {
-	cvbs_vdac_out: endpoint {
-		remote-endpoint = <&cvbs_connector_in>;
-	};
-};
-
-&hdmi_tx {
+&uart_AO {
 	status = "okay";
-	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };
-
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts

@@ -58,6 +58,17 @@
 			};
 		};
 	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
 };
 
 &cvbs_vdac_port {
@@ -66,6 +77,18 @@
 	};
 };
 
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 /* This UART is brought out to the DB9 connector */
 &uart_AO {
 	status = "okay";

arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi

@@ -48,7 +48,7 @@
 	compatible = "amlogic,s905x", "amlogic,meson-gxl";
 };
 
-/* S905X Only has access to its internal PHY */
+/* S905X only has access to its internal PHY */
 &ethmac {
 	phy-mode = "rmii";
 	phy-handle = <&internal_phy>;

arch/arm64/boot/dts/amlogic/meson-gxl.dtsi

@@ -190,9 +190,59 @@
 				function = "spdif_out_ao";
 			};
 		};
+
+		ao_cec_pins: ao_cec {
+			mux {
+				groups = "ao_cec";
+				function = "cec_ao";
+			};
+		};
+
+		ee_cec_pins: ee_cec {
+			mux {
+				groups = "ee_cec";
+				function = "cec_ao";
+			};
+		};
 	};
 };
 
+&hdmi_tx {
+	compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+	resets = <&reset RESET_HDMITX_CAPB3>,
+		 <&reset RESET_HDMI_SYSTEM_RESET>,
+		 <&reset RESET_HDMI_TX>;
+	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+	clock-names = "isfr", "iahb", "venci";
+};
+
+&hiubus {
+	clkc: clock-controller@0 {
+		compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc";
+		#clock-cells = <1>;
+		reg = <0x0 0x0 0x0 0x3db>;
+	};
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_AO_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+	clocks = <&clkc CLKID_I2C>;
+};
+
 &periphs {
 	pinctrl_periphs: pinctrl@4b0 {
 		compatible = "amlogic,meson-gxl-periphs-pinctrl";
@@ -203,12 +253,12 @@
 		gpio: bank@4b0 {
 			reg = <0x0 0x004b0 0x0 0x28>,
 			      <0x0 0x004e8 0x0 0x14>,
-			      <0x0 0x00120 0x0 0x14>,
+			      <0x0 0x00520 0x0 0x14>,
 			      <0x0 0x00430 0x0 0x40>;
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_periphs 0 14 101>;
+			gpio-ranges = <&pinctrl_periphs 0 10 101>;
 		};
 
 		emmc_pins: emmc {
@@ -231,6 +281,22 @@
 			};
 		};
 
+		spi_pins: spi {
+			mux {
+				groups = "spi_miso",
+					"spi_mosi",
+					"spi_sclk";
+				function = "spi";
+			};
+		};
+
+		spi_ss0_pins: spi-ss0 {
+			mux {
+				groups = "spi_ss0";
+				function = "spi";
+			};
+		};
+
 		sdcard_pins: sdcard {
 			mux {
 				groups = "sdcard_d0",
@@ -354,6 +420,20 @@
 			};
 		};
 
+		eth_link_led_pins: eth_link_led {
+			mux {
+				groups = "eth_link_led";
+				function = "eth_led";
+			};
+		};
+
+		eth_act_led_pins: eth_act_led {
+			mux {
+				groups = "eth_act_led";
+				function = "eth_led";
+			};
+		};
+		
 		pwm_a_pins: pwm_a {
 			mux {
 				groups = "pwm_a";
@@ -501,30 +581,6 @@
 	};
 };
 
-&hiubus {
-	clkc: clock-controller@0 {
-		compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc";
-		#clock-cells = <1>;
-		reg = <0x0 0x0 0x0 0x3db>;
-	};
-};
-
-&i2c_A {
-	clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_AO {
-	clocks = <&clkc CLKID_AO_I2C>;
-};
-
-&i2c_B {
-	clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_C {
-	clocks = <&clkc CLKID_I2C>;
-};
-
 &saradc {
 	compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
 	clocks = <&xtal>,
@@ -556,6 +612,13 @@
 	clock-names = "core", "clkin0", "clkin1";
 };
 
+&spicc {
+	clocks = <&clkc CLKID_SPICC>;
+	clock-names = "core";
+	resets = <&reset RESET_PERIPHS_SPICC>;
+	num-cs = <1>;
+};
+
 &spifc {
 	clocks = <&clkc CLKID_SPI>;
 };
@@ -563,15 +626,3 @@
 &vpu {
 	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
 };
-
-&hdmi_tx {
-	compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
-	resets = <&reset RESET_HDMITX_CAPB3>,
-		 <&reset RESET_HDMI_SYSTEM_RESET>,
-		 <&reset RESET_HDMI_TX>;
-	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
-	clocks = <&clkc CLKID_HDMI_PCLK>,
-		 <&clkc CLKID_CLK81>,
-		 <&clkc CLKID_GCLK_VENCI_INT0>;
-	clock-names = "isfr", "iahb", "venci";
-};

arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts

@@ -113,11 +113,49 @@
 	};
 };
 
-/* This UART is brought out to the DB9 connector */
-&uart_AO {
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
 	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
+
+	pinctrl-0 = <&eth_pins>;
 	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		max-speed = <1000>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
 };
 
 &ir {
@@ -164,47 +202,8 @@
 	vqmmc-supply = <&vddio_boot>;
 };
 
-&ethmac {
-	status = "okay";
-
-	pinctrl-0 = <&eth_pins>;
-	pinctrl-names = "default";
-
-	/* Select external PHY by default */
-	phy-handle = <&external_phy>;
-
-	amlogic,tx-delay-ns = <2>;
-
-	snps,reset-gpio = <&gpio GPIOZ_14 0>;
-	snps,reset-delays-us = <0 10000 1000000>;
-	snps,reset-active-low;
-
-	/* External PHY is in RGMII */
-	phy-mode = "rgmii";
-};
-
-&external_mdio {
-	external_phy: ethernet-phy@0 {
-		compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-		max-speed = <1000>;
-	};
-};
-
-&cvbs_vdac_port {
-	cvbs_vdac_out: endpoint {
-		remote-endpoint = <&cvbs_connector_in>;
-	};
-};
-
-&hdmi_tx {
+&uart_AO {
 	status = "okay";
-	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };
-
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};

arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts

+/*
+ * Copyright (c) 2016-2017 Andreas Färber
+ *
+ * Based on nexbox-a1:
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+
+/ {
+	compatible = "kingnovel,r-box-pro", "amlogic,s912", "amlogic,meson-gxm";
+	model = "R-Box Pro";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "rbox-pro:blue:on";
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		red {
+			label = "rbox-pro:red:standby";
+			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			retain-state-suspended;
+			panic-indicator;
+		};
+	};
+
+	vddio_boot: regulator-vddio-boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+
+	amlogic,tx-delay-ns = <2>;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		max-speed = <1000>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: brcmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};

arch/arm64/boot/dts/arm/juno-base.dtsi

@@ -53,7 +53,6 @@
 		#global-interrupts = <1>;
 		dma-coherent;
 		power-domains = <&scpi_devpd 0>;
-		status = "disabled";
 	};
 
 	gic: interrupt-controller@2c010000 {
@@ -202,6 +201,15 @@
 		};
 	};
 
+	cpu_debug0: cpu_debug@22010000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x22010000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
 	etm0: etm@22040000 {
 		compatible = "arm,coresight-etm4x", "arm,primecell";
 		reg = <0 0x22040000 0 0x1000>;
@@ -252,6 +260,15 @@
 		};
 	};
 
+	cpu_debug1: cpu_debug@22110000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x22110000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
 	etm1: etm@22140000 {
 		compatible = "arm,coresight-etm4x", "arm,primecell";
 		reg = <0 0x22140000 0 0x1000>;
@@ -266,6 +283,15 @@
 		};
 	};
 
+	cpu_debug2: cpu_debug@23010000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x23010000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
 	etm2: etm@23040000 {
 		compatible = "arm,coresight-etm4x", "arm,primecell";
 		reg = <0 0x23040000 0 0x1000>;
@@ -330,6 +356,15 @@
 		};
 	};
 
+	cpu_debug3: cpu_debug@23110000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x23110000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
 	etm3: etm@23140000 {
 		compatible = "arm,coresight-etm4x", "arm,primecell";
 		reg = <0 0x23140000 0 0x1000>;
@@ -344,6 +379,15 @@
 		};
 	};
 
+	cpu_debug4: cpu_debug@23210000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x23210000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
 	etm4: etm@23240000 {
 		compatible = "arm,coresight-etm4x", "arm,primecell";
 		reg = <0 0x23240000 0 0x1000>;
@@ -358,6 +402,15 @@
 		};
 	};
 
+	cpu_debug5: cpu_debug@23310000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x23310000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
 	etm5: etm@23340000 {
 		compatible = "arm,coresight-etm4x", "arm,primecell";
 		reg = <0 0x23340000 0 0x1000>;
@@ -546,7 +599,6 @@
 			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		#global-interrupts = <1>;
-		status = "disabled";
 	};
 
 	smmu_hdlcd0: iommu@7fb20000 {
@@ -556,7 +608,6 @@
 			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		#global-interrupts = <1>;
-		status = "disabled";
 	};
 
 	smmu_usb: iommu@7fb30000 {
@@ -567,7 +618,6 @@
 		#iommu-cells = <1>;
 		#global-interrupts = <1>;
 		dma-coherent;
-		status = "disabled";
 	};
 
 	dma@7ff00000 {

arch/arm64/boot/dts/arm/juno-r1.dts

@@ -281,3 +281,27 @@
 &stm_out_port {
 	remote-endpoint = <&csys1_funnel_in_port0>;
 };
+
+&cpu_debug0 {
+	cpu = <&A57_0>;
+};
+
+&cpu_debug1 {
+	cpu = <&A57_1>;
+};
+
+&cpu_debug2 {
+	cpu = <&A53_0>;
+};
+
+&cpu_debug3 {
+	cpu = <&A53_1>;
+};
+
+&cpu_debug4 {
+	cpu = <&A53_2>;
+};
+
+&cpu_debug5 {
+	cpu = <&A53_3>;
+};

arch/arm64/boot/dts/arm/juno-r2.dts

@@ -281,3 +281,27 @@
 &stm_out_port {
 	remote-endpoint = <&csys1_funnel_in_port0>;
 };
+
+&cpu_debug0 {
+	cpu = <&A72_0>;
+};
+
+&cpu_debug1 {
+	cpu = <&A72_1>;
+};
+
+&cpu_debug2 {
+	cpu = <&A53_0>;
+};
+
+&cpu_debug3 {
+	cpu = <&A53_1>;
+};
+
+&cpu_debug4 {
+	cpu = <&A53_2>;
+};
+
+&cpu_debug5 {
+	cpu = <&A53_3>;
+};

arch/arm64/boot/dts/arm/juno.dts

@@ -268,3 +268,27 @@
 		};
 	};
 };
+
+&cpu_debug0 {
+	cpu = <&A57_0>;
+};
+
+&cpu_debug1 {
+	cpu = <&A57_1>;
+};
+
+&cpu_debug2 {
+	cpu = <&A53_0>;
+};
+
+&cpu_debug3 {
+	cpu = <&A53_1>;
+};
+
+&cpu_debug4 {
+	cpu = <&A53_2>;
+};
+
+&cpu_debug5 {
+	cpu = <&A53_3>;
+};

arch/arm64/boot/dts/broadcom/Makefile

 dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
 dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb ns2-xmc.dtb
 
+dts-dirs	:= stingray
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
 clean-files	:= *.dtb

arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts

@@ -22,3 +22,20 @@
 &uart1 {
 	status = "okay";
 };
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34>;
+	status = "okay";
+	bus-width = <4>;
+	non-removable;
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};

arch/arm64/boot/dts/broadcom/bcm2837.dtsi

@@ -75,6 +75,10 @@
 	interrupts = <8>;
 };
 
+&cpu_thermal {
+	coefficients = <(-538)	412000>;
+};
+
 /* enable thermal sensor with the correct compatible property set */
 &thermal {
 	compatible = "brcm,bcm2837-thermal";

arch/arm64/boot/dts/broadcom/ns2.dtsi

@@ -460,6 +460,20 @@
 			};
 		};
 
+		usbdrd_phy: phy@66000960 {
+			#phy-cells = <0>;
+			compatible = "brcm,ns2-drd-phy";
+			reg = <0x66000960 0x24>,
+			      <0x67012800 0x4>,
+			      <0x6501d148 0x4>,
+			      <0x664d0700 0x4>;
+			reg-names = "icfg", "rst-ctrl",
+				    "crmu-ctrl", "usb2-strap";
+			id-gpios = <&gpio_g 30 0>;
+			vbus-gpios = <&gpio_g 31 0>;
+			status = "disabled";
+		};
+
 		pwm: pwm@66010000 {
 			compatible = "brcm,iproc-pwm";
 			reg = <0x66010000 0x28>;

arch/arm64/boot/dts/broadcom/stingray/Makefile

+dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742k.dtb
+dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742t.dtb
+
+always		:= $(dtb-y)
+subdir-y	:= $(dts-dirs)
+clean-files	:= *.dtb

arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi

+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "stingray.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart0;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	sdio0_vddo_ctrl_reg: sdio0_vddo_ctrl {
+		compatible = "regulator-gpio";
+		regulator-name = "sdio0_vddo_ctrl_reg";
+		regulator-type = "voltage";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pca9505 18 0>;
+		states = <3300000 0x0
+			  1800000 0x1>;
+	};
+
+	sdio1_vddo_ctrl_reg: sdio1_vddo_ctrl {
+		compatible = "regulator-gpio";
+		regulator-name = "sdio1_vddo_ctrl_reg";
+		regulator-type = "voltage";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pca9505 19 0>;
+		states = <3300000 0x0
+			  1800000 0x1>;
+	};
+};
+
+&memory { /* Default DRAM banks */
+	reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */
+	      <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&pwm {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9505: pca9505@20 {
+		compatible = "nxp,pca9505";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x20>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	pcf8574: pcf8574@20 {
+		compatible = "nxp,pcf8574a";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x27>;
+	};
+};
+
+&nand {
+	status = "ok";
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <16>;
+		brcm,nand-oob-sector-size = <16>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&sdio0 {
+	vqmmc-supply = <&sdio0_vddo_ctrl_reg>;
+	non-removable;
+	full-pwr-cycle;
+	status = "okay";
+};
+
+&sdio1 {
+	vqmmc-supply = <&sdio1_vddo_ctrl_reg>;
+	full-pwr-cycle;
+	status = "okay";
+};

arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts

+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm958742-base.dtsi"
+
+/ {
+	compatible = "brcm,bcm958742k", "brcm,stingray";
+	model = "Stingray Combo SVK (BCM958742K)";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&ssp0 {
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpio_hsls 34 0>;
+	status = "okay";
+
+	spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&ssp1 {
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpio_hsls 96 0>;
+	status = "okay";
+
+	spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};

arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts

+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm958742-base.dtsi"
+
+/ {
+	compatible = "brcm,bcm958742t", "brcm,stingray";
+	model = "Stingray SST100 (BCM958742T)";
+};

arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi

+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/clock/bcm-sr.h>
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+
+		crmu_ref25m: crmu_ref25m {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&osc>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		genpll0: genpll0@0001d104 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll0";
+			reg = <0x0001d104 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll0", "clk_125", "clk_scr",
+					     "clk_250", "clk_pcie_axi",
+					     "clk_paxc_axi_x2",
+					     "clk_paxc_axi";
+		};
+
+		genpll3: genpll3@0001d1e0 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll3";
+			reg = <0x0001d1e0 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll3", "clk_hsls",
+					     "clk_sdio";
+		};
+
+		genpll4: genpll4@0001d214 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll4";
+			reg = <0x0001d214 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll4", "clk_ccn",
+					     "clk_tpiu_pll", "noc_clk",
+					     "pll_chclk_fs4",
+					     "clk_bridge_fscpu";
+		};
+
+		genpll5: genpll5@0001d248 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll5";
+			reg = <0x0001d248 0x32>,
+			      <0x0001c870 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll5", "fs4_hf_clk",
+					     "crypto_ae_clk", "raid_ae_clk";
+		};
+
+		lcpll0: lcpll0@0001d0c4 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-lcpll0";
+			reg = <0x0001d0c4 0x3c>,
+			      <0x0001c870 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll0", "clk_sata_refp",
+					     "clk_sata_refn", "clk_sata_350",
+					     "clk_sata_500";
+		};
+
+		lcpll1: lcpll1@0001d138 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-lcpll1";
+			reg = <0x0001d138 0x3c>,
+			      <0x0001c870 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll1", "clk_wanpn",
+					     "clk_usb_ref",
+					     "timesync_evt_clk";
+		};
+
+		hsls_clk: hsls_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 1>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
+
+		hsls_div2_clk: hsls_div2_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+
+		};
+
+		hsls_div4_clk: hsls_div4_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsls_25m_clk: hsls_25m_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&crmu_ref25m>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
+
+		hsls_25m_div2_clk: hsls_25m_div2_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&hsls_25m_clk>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		sdio0_clk: sdio0_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
+
+		sdio1_clk: sdio1_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};

arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi

+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/pinctrl/brcm,pinctrl-stingray.h>
+
+		pinconf: pinconf@00140000 {
+			compatible = "pinconf-single";
+			reg = <0x00140000 0x250>;
+			pinctrl-single,register-width = <32>;
+
+			/* pinconf functions */
+		};
+
+		pinmux: pinmux@0014029c {
+			compatible = "pinctrl-single";
+			reg = <0x0014029c 0x250>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0xf>;
+			pinctrl-single,gpio-range = <
+				&range 0 154 MODE_GPIO
+				>;
+			range: gpio-range {
+				#pinctrl-single,gpio-range-cells = <3>;
+			};
+
+			/* pinctrl functions */
+			tsio_pins: pinmux_gpio_14 {
+				pinctrl-single,pins = <
+					0x038 MODE_NITRO /* tsio_0 */
+					0x03c MODE_NITRO /* tsio_1 */
+				>;
+			};
+
+			nor_pins: pinmux_pnor_adv_n {
+				pinctrl-single,pins = <
+					0x0ac MODE_PNOR /* nand_ce1_n */
+					0x0b0 MODE_PNOR /* nand_ce0_n */
+					0x0b4 MODE_PNOR /* nand_we_n */
+					0x0b8 MODE_PNOR /* nand_wp_n */
+					0x0bc MODE_PNOR /* nand_re_n */
+					0x0c0 MODE_PNOR /* nand_rdy_bsy_n */
+					0x0c4 MODE_PNOR /* nand_io0_0 */
+					0x0c8 MODE_PNOR /* nand_io1_0 */
+					0x0cc MODE_PNOR /* nand_io2_0 */
+					0x0d0 MODE_PNOR /* nand_io3_0 */
+					0x0d4 MODE_PNOR /* nand_io4_0 */
+					0x0d8 MODE_PNOR /* nand_io5_0 */
+					0x0dc MODE_PNOR /* nand_io6_0 */
+					0x0e0 MODE_PNOR /* nand_io7_0 */
+					0x0e4 MODE_PNOR /* nand_io8_0 */
+					0x0e8 MODE_PNOR /* nand_io9_0 */
+					0x0ec MODE_PNOR /* nand_io10_0 */
+					0x0f0 MODE_PNOR /* nand_io11_0 */
+					0x0f4 MODE_PNOR /* nand_io12_0 */
+					0x0f8 MODE_PNOR /* nand_io13_0 */
+					0x0fc MODE_PNOR /* nand_io14_0 */
+					0x100 MODE_PNOR /* nand_io15_0 */
+					0x104 MODE_PNOR /* nand_ale_0 */
+					0x108 MODE_PNOR /* nand_cle_0 */
+					0x040 MODE_PNOR /* pnor_adv_n */
+					0x044 MODE_PNOR /* pnor_baa_n */
+					0x048 MODE_PNOR /* pnor_bls_0_n */
+					0x04c MODE_PNOR /* pnor_bls_1_n */
+					0x050 MODE_PNOR /* pnor_cre */
+					0x054 MODE_PNOR /* pnor_cs_2_n */
+					0x058 MODE_PNOR /* pnor_cs_1_n */
+					0x05c MODE_PNOR /* pnor_cs_0_n */
+					0x060 MODE_PNOR /* pnor_we_n */
+					0x064 MODE_PNOR /* pnor_oe_n */
+					0x068 MODE_PNOR /* pnor_intr */
+					0x06c MODE_PNOR /* pnor_dat_0 */
+					0x070 MODE_PNOR /* pnor_dat_1 */
+					0x074 MODE_PNOR /* pnor_dat_2 */
+					0x078 MODE_PNOR /* pnor_dat_3 */
+					0x07c MODE_PNOR /* pnor_dat_4 */
+					0x080 MODE_PNOR /* pnor_dat_5 */
+					0x084 MODE_PNOR /* pnor_dat_6 */
+					0x088 MODE_PNOR /* pnor_dat_7 */
+					0x08c MODE_PNOR /* pnor_dat_8 */
+					0x090 MODE_PNOR /* pnor_dat_9 */
+					0x094 MODE_PNOR /* pnor_dat_10 */
+					0x098 MODE_PNOR /* pnor_dat_11 */
+					0x09c MODE_PNOR /* pnor_dat_12 */
+					0x0a0 MODE_PNOR /* pnor_dat_13 */
+					0x0a4 MODE_PNOR /* pnor_dat_14 */
+					0x0a8 MODE_PNOR /* pnor_dat_15 */
+				>;
+			};
+
+			nand_pins: pinmux_nand_ce1_n {
+				pinctrl-single,pins = <
+					0x0ac MODE_NAND /* nand_ce1_n */
+					0x0b0 MODE_NAND /* nand_ce0_n */
+					0x0b4 MODE_NAND /* nand_we_n */
+					0x0b8 MODE_NAND /* nand_wp_n */
+					0x0bc MODE_NAND /* nand_re_n */
+					0x0c0 MODE_NAND /* nand_rdy_bsy_n */
+					0x0c4 MODE_NAND /* nand_io0_0 */
+					0x0c8 MODE_NAND /* nand_io1_0 */
+					0x0cc MODE_NAND /* nand_io2_0 */
+					0x0d0 MODE_NAND /* nand_io3_0 */
+					0x0d4 MODE_NAND /* nand_io4_0 */
+					0x0d8 MODE_NAND /* nand_io5_0 */
+					0x0dc MODE_NAND /* nand_io6_0 */
+					0x0e0 MODE_NAND /* nand_io7_0 */
+					0x0e4 MODE_NAND /* nand_io8_0 */
+					0x0e8 MODE_NAND /* nand_io9_0 */
+					0x0ec MODE_NAND /* nand_io10_0 */
+					0x0f0 MODE_NAND /* nand_io11_0 */
+					0x0f4 MODE_NAND /* nand_io12_0 */
+					0x0f8 MODE_NAND /* nand_io13_0 */
+					0x0fc MODE_NAND /* nand_io14_0 */
+					0x100 MODE_NAND /* nand_io15_0 */
+					0x104 MODE_NAND /* nand_ale_0 */
+					0x108 MODE_NAND /* nand_cle_0 */
+				>;
+			};
+
+			pwm0_pins: pinmux_pwm_0 {
+				pinctrl-single,pins = <
+					0x10c MODE_NITRO
+				>;
+			};
+
+			pwm1_pins: pinmux_pwm_1 {
+				pinctrl-single,pins = <
+					0x110 MODE_NITRO
+				>;
+			};
+
+			pwm2_pins: pinmux_pwm_2 {
+				pinctrl-single,pins = <
+					0x114 MODE_NITRO
+				>;
+			};
+
+			pwm3_pins: pinmux_pwm_3 {
+				pinctrl-single,pins = <
+					0x118 MODE_NITRO
+				>;
+			};
+
+			dbu_rxd_pins: pinmux_uart1_sin_nitro {
+				pinctrl-single,pins = <
+					0x11c MODE_NITRO /* dbu_rxd */
+					0x120 MODE_NITRO /* dbu_txd */
+				>;
+			};
+
+			uart1_pins: pinmux_uart1_sin_nand {
+				pinctrl-single,pins = <
+					0x11c MODE_NAND /* uart1_sin */
+					0x120 MODE_NAND /* uart1_out */
+				>;
+			};
+
+			uart2_pins: pinmux_uart2_sin {
+				pinctrl-single,pins = <
+					0x124 MODE_NITRO /* uart2_sin */
+					0x128 MODE_NITRO /* uart2_out */
+				>;
+			};
+
+			uart3_pins: pinmux_uart3_sin {
+				pinctrl-single,pins = <
+					0x12c MODE_NITRO /* uart3_sin */
+					0x130 MODE_NITRO /* uart3_out */
+				>;
+			};
+
+			i2s_pins: pinmux_i2s_bitclk {
+				pinctrl-single,pins = <
+					0x134 MODE_NITRO /* i2s_bitclk */
+					0x138 MODE_NITRO /* i2s_sdout */
+					0x13c MODE_NITRO /* i2s_sdin */
+					0x140 MODE_NITRO /* i2s_ws */
+					0x144 MODE_NITRO /* i2s_mclk */
+					0x148 MODE_NITRO /* i2s_spdif_out */
+				>;
+			};
+
+			qspi_pins: pinumx_qspi_hold_n {
+				pinctrl-single,pins = <
+					0x14c MODE_NAND /* qspi_hold_n */
+					0x150 MODE_NAND /* qspi_wp_n */
+					0x154 MODE_NAND /* qspi_sck */
+					0x158 MODE_NAND /* qspi_cs_n */
+					0x15c MODE_NAND /* qspi_mosi */
+					0x160 MODE_NAND /* qspi_miso */
+				>;
+			};
+
+			mdio_pins: pinumx_ext_mdio {
+				pinctrl-single,pins = <
+					0x164 MODE_NITRO /* ext_mdio */
+					0x168 MODE_NITRO /* ext_mdc */
+				>;
+			};
+
+			i2c0_pins: pinmux_i2c0_sda {
+				pinctrl-single,pins = <
+					0x16c MODE_NITRO /* i2c0_sda */
+					0x170 MODE_NITRO /* i2c0_scl */
+				>;
+			};
+
+			i2c1_pins: pinmux_i2c1_sda {
+				pinctrl-single,pins = <
+					0x174 MODE_NITRO /* i2c1_sda */
+					0x178 MODE_NITRO /* i2c1_scl */
+				>;
+			};
+
+			sdio0_pins: pinmux_sdio0_cd_l {
+				pinctrl-single,pins = <
+					0x17c MODE_NITRO /* sdio0_cd_l */
+					0x180 MODE_NITRO /* sdio0_clk_sdcard */
+					0x184 MODE_NITRO /* sdio0_data0 */
+					0x188 MODE_NITRO /* sdio0_data1 */
+					0x18c MODE_NITRO /* sdio0_data2 */
+					0x190 MODE_NITRO /* sdio0_data3 */
+					0x194 MODE_NITRO /* sdio0_data4 */
+					0x198 MODE_NITRO /* sdio0_data5 */
+					0x19c MODE_NITRO /* sdio0_data6 */
+					0x1a0 MODE_NITRO /* sdio0_data7 */
+					0x1a4 MODE_NITRO /* sdio0_cmd */
+					0x1a8 MODE_NITRO /* sdio0_emmc_rst_n */
+					0x1ac MODE_NITRO /* sdio0_led_on */
+					0x1b0 MODE_NITRO /* sdio0_wp */
+				>;
+			};
+
+			sdio1_pins: pinmux_sdio1_cd_l {
+				pinctrl-single,pins = <
+					0x1b4 MODE_NITRO /* sdio1_cd_l */
+					0x1b8 MODE_NITRO /* sdio1_clk_sdcard */
+					0x1bc MODE_NITRO /* sdio1_data0 */
+					0x1c0 MODE_NITRO /* sdio1_data1 */
+					0x1c4 MODE_NITRO /* sdio1_data2 */
+					0x1c8 MODE_NITRO /* sdio1_data3 */
+					0x1cc MODE_NITRO /* sdio1_data4 */
+					0x1d0 MODE_NITRO /* sdio1_data5 */
+					0x1d4 MODE_NITRO /* sdio1_data6 */
+					0x1d8 MODE_NITRO /* sdio1_data7 */
+					0x1dc MODE_NITRO /* sdio1_cmd */
+					0x1e0 MODE_NITRO /* sdio1_emmc_rst_n */
+					0x1e4 MODE_NITRO /* sdio1_led_on */
+					0x1e8 MODE_NITRO /* sdio1_wp */
+				>;
+			};
+
+			spi0_pins: pinmux_spi0_sck_nand {
+				pinctrl-single,pins = <
+					0x1ec MODE_NITRO /* spi0_sck */
+					0x1f0 MODE_NITRO /* spi0_rxd */
+					0x1f4 MODE_NITRO /* spi0_fss */
+					0x1f8 MODE_NITRO /* spi0_txd */
+				>;
+			};
+
+			spi1_pins: pinmux_spi1_sck_nand {
+				pinctrl-single,pins = <
+					0x1fc MODE_NITRO /* spi1_sck */
+					0x200 MODE_NITRO /* spi1_rxd */
+					0x204 MODE_NITRO /* spi1_fss */
+					0x208 MODE_NITRO /* spi1_txd */
+				>;
+			};
+
+			nuart_pins: pinmux_uart0_sin_nitro {
+				pinctrl-single,pins = <
+					0x20c MODE_NITRO /* nuart_rxd */
+					0x210 MODE_NITRO /* nuart_txd */
+				>;
+			};
+
+			uart0_pins: pinumux_uart0_sin_nand {
+				pinctrl-single,pins = <
+					0x20c MODE_NAND /* uart0_sin */
+					0x210 MODE_NAND /* uart0_out */
+					0x214 MODE_NAND /* uart0_rts */
+					0x218 MODE_NAND /* uart0_cts */
+					0x21c MODE_NAND /* uart0_dtr */
+					0x220 MODE_NAND /* uart0_dcd */
+					0x224 MODE_NAND /* uart0_dsr */
+					0x228 MODE_NAND /* uart0_ri */
+				>;
+			};
+
+			drdu2_pins: pinmux_drdu2_overcurrent {
+				pinctrl-single,pins = <
+					0x22c MODE_NITRO /* drdu2_overcurrent */
+					0x230 MODE_NITRO /* drdu2_vbus_ppc */
+					0x234 MODE_NITRO /* drdu2_vbus_present */
+					0x238 MODE_NITRO /* drdu2_id */
+				>;
+			};
+
+			drdu3_pins: pinmux_drdu3_overcurrent {
+				pinctrl-single,pins = <
+					0x23c MODE_NITRO /* drdu3_overcurrent */
+					0x240 MODE_NITRO /* drdu3_vbus_ppc */
+					0x244 MODE_NITRO /* drdu3_vbus_present */
+					0x248 MODE_NITRO /* drdu3_id */
+				>;
+			};
+
+			usb3h_pins: pinmux_usb3h_overcurrent {
+				pinctrl-single,pins = <
+					0x24c MODE_NITRO /* usb3h_overcurrent */
+					0x250 MODE_NITRO /* usb3h_vbus_ppc */
+				>;
+			};
+		};

arch/arm64/boot/dts/exynos/exynos5433-tm2.dts

@@ -60,7 +60,6 @@
 		vci-supply = <&ldo28_reg>;
 		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
 		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
-		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
 	};
 };
 

arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts

 /*
  * Device Tree file for Freescale LS1012A Freedom Board.
  *
- * Copyright 2016, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPLv2 or the X11 license, at your option. Note that this dual

arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts

 /*
  * Device Tree file for Freescale LS1012A QDS Board.
  *
- * Copyright 2016, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPLv2 or the X11 license, at your option. Note that this dual
@@ -97,6 +97,14 @@
 	status = "okay";
 };
 
+&esdhc0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 

arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts

 /*
  * Device Tree file for Freescale LS1012A RDB Board.
  *
- * Copyright 2016, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPLv2 or the X11 license, at your option. Note that this dual
@@ -54,6 +54,19 @@
 	status = "okay";
 };
 
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 };

arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi

 /*
  * Device Tree Include file for Freescale Layerscape-1012A family SoC.
  *
- * Copyright 2016, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPLv2 or the X11 license, at your option. Note that this dual
@@ -76,10 +76,17 @@
 	sysclk: sysclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <100000000>;
+		clock-frequency = <125000000>;
 		clock-output-names = "sysclk";
 	};
 
+	coreclk: coreclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "coreclk";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
@@ -117,12 +124,37 @@
 		#size-cells = <2>;
 		ranges;
 
+		esdhc0: esdhc@1560000 {
+			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <0 62 0x4>;
+			clocks = <&clockgen 4 0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
 		scfg: scfg@1570000 {
 			compatible = "fsl,ls1012a-scfg", "syscon";
 			reg = <0x0 0x1570000 0x0 0x10000>;
 			big-endian;
 		};
 
+		esdhc1: esdhc@1580000 {
+			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1580000 0x0 0x10000>;
+			interrupts = <0 65 0x4>;
+			clocks = <&clockgen 4 0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			broken-cd;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
 		crypto: crypto@1700000 {
 			compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
 				     "fsl,sec-v4.0";
@@ -223,7 +255,8 @@
 			compatible = "fsl,ls1012a-clockgen";
 			reg = <0x0 0x1ee1000 0x0 0x1000>;
 			#clock-cells = <2>;
-			clocks = <&sysclk>;
+			clocks = <&sysclk &coreclk>;
+			clock-names = "sysclk", "coreclk";
 		};
 
 		tmu: tmu@1f00000 {

arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi

+/*
+ * QorIQ FMan v3 device tree nodes for ls1043
+ *
+ * Copyright 2015-2016 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+&soc {
+
+/* include used FMan blocks */
+#include "qoriq-fman3-0.dtsi"
+#include "qoriq-fman3-0-1g-0.dtsi"
+#include "qoriq-fman3-0-1g-1.dtsi"
+#include "qoriq-fman3-0-1g-2.dtsi"
+#include "qoriq-fman3-0-1g-3.dtsi"
+#include "qoriq-fman3-0-1g-4.dtsi"
+#include "qoriq-fman3-0-1g-5.dtsi"
+#include "qoriq-fman3-0-10g-0.dtsi"
+
+};
+
+&fman0 {
+	/* these aliases provide the FMan ports mapping */
+	enet0: ethernet@e0000 {
+	};
+
+	enet1: ethernet@e2000 {
+	};
+
+	enet2: ethernet@e4000 {
+	};
+
+	enet3: ethernet@e6000 {
+	};
+
+	enet4: ethernet@e8000 {
+	};
+
+	enet5: ethernet@ea000 {
+	};
+
+	enet6: ethernet@f0000 {
+	};
+};

arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts

 /*
  * Device Tree Include file for Freescale Layerscape-1043A family SoC.
  *
- * Copyright 2014-2015, Freescale Semiconductor
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
  *
  * Mingkai Hu <Mingkai.hu@freescale.com>
  *
@@ -181,3 +181,5 @@
 		reg = <0>;
 	};
 };
+
+#include "fsl-ls1043-post.dtsi"

arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts

 /*
  * Device Tree file for Freescale LS2080a software Simulator model
  *
- * Copyright (C) 2014-2015, Freescale Semiconductor
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
  *
  * Bhupesh Sharma <bhupesh.sharma@freescale.com>
  *