Merge tag 'nand/for-4.17' of git://git.infradead.org/linux-mtd into mtd/next

Core changes:
* Prepare arrival of the SPI NAND subsystem by implementing a generic
  (interface-agnostic) layer to ease manipulation of NAND devices
* Move onenand code base to the drivers/mtd/nand/ dir
* Rework timing mode selection
* Provide a generic way for NAND chip drivers to flag a specific
  GET/SET FEATURE operation as supported/unsupported
* Stop embedding ONFI/JEDEC param page in nand_chip

Driver changes:
* Rework/cleanup of the mxc driver
* Various cleanups in the vf610 driver
* Migrate the fsmc and vf610 to ->exec_op()
* Get rid of the pxa driver (replaced by marvell_nand)
* Support ->setup_data_interface() in the GPMI driver
* Fix probe error path in several drivers
* Remove support for unused hw_syndrome mode in sunxi_nand
* Various minor improvements

.mailmap

@@ -33,9 +33,9 @@ Axel Lin <axel.lin@gmail.com>
 Ben Gardner <bgardner@wabtec.com>
 Ben M Cahill <ben.m.cahill@intel.com>
 Björn Steinbrink <B.Steinbrink@gmx.de>
-Boris Brezillon <boris.brezillon@free-electrons.com>
-Boris Brezillon <boris.brezillon@free-electrons.com> <b.brezillon.dev@gmail.com>
-Boris Brezillon <boris.brezillon@free-electrons.com> <b.brezillon@overkiz.com>
+Boris Brezillon <boris.brezillon@bootlin.com> <boris.brezillon@free-electrons.com>
+Boris Brezillon <boris.brezillon@bootlin.com> <b.brezillon.dev@gmail.com>
+Boris Brezillon <boris.brezillon@bootlin.com> <b.brezillon@overkiz.com>
 Brian Avery <b.avery@hp.com>
 Brian King <brking@us.ibm.com>
 Christoph Hellwig <hch@lst.de>
@@ -126,6 +126,7 @@ Mayuresh Janorkar <mayur@ti.com>
 Michael Buesch <m@bues.ch>
 Michel Dänzer <michel@tungstengraphics.com>
 Miodrag Dinic <miodrag.dinic@mips.com> <miodrag.dinic@imgtec.com>
+Miquel Raynal <miquel.raynal@bootlin.com> <miquel.raynal@free-electrons.com>
 Mitesh shah <mshah@teja.com>
 Mohit Kumar <mohit.kumar@st.com> <mohit.kumar.dhaka@gmail.com>
 Morten Welinder <terra@gnome.org>

Documentation/arm/Samsung-S3C24XX/S3C2412.txt

@@ -46,7 +46,7 @@ NAND
 ----
 
   The NAND hardware is similar to the S3C2440, and is supported by the
-  s3c2410 driver in the drivers/mtd/nand directory.
+  s3c2410 driver in the drivers/mtd/nand/raw directory.
 
 
 USB Host

Documentation/devicetree/bindings/mtd/marvell-nand.txt

@@ -14,7 +14,10 @@ Required properties:
 - #address-cells: shall be set to 1. Encode the NAND CS.
 - #size-cells: shall be set to 0.
 - interrupts: shall define the NAND controller interrupt.
-- clocks: shall reference the NAND controller clock.
+- clocks: shall reference the NAND controller clocks, the second one is
+  is only needed for the Armada 7K/8K SoCs
+- clock-names: mandatory if there is a second clock, in this case there
+  should be one clock named "core" and another one named "reg"
 - marvell,system-controller: Set to retrieve the syscon node that handles
   NAND controller related registers (only required with the
   "marvell,armada-8k-nand[-controller]" compatibles).

Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt

-PXA3xx NAND DT bindings
-
-Required properties:
-
- - compatible:		Should be set to one of the following:
-			marvell,pxa3xx-nand
-			marvell,armada370-nand
-			marvell,armada-8k-nand
- - reg: 		The register base for the controller
- - interrupts:		The interrupt to map
- - #address-cells:	Set to <1> if the node includes partitions
- - marvell,system-controller: Set to retrieve the syscon node that handles
-			NAND controller related registers (only required
-			with marvell,armada-8k-nand compatible).
-
-Optional properties:
-
- - dmas:			dma data channel, see dma.txt binding doc
- - marvell,nand-enable-arbiter:	Set to enable the bus arbiter
- - marvell,nand-keep-config:	Set to keep the NAND controller config as set
-				by the bootloader
- - num-cs:			Number of chipselect lines to use
- - nand-on-flash-bbt: 		boolean to enable on flash bbt option if
-				not present false
- - nand-ecc-strength:           number of bits to correct per ECC step
- - nand-ecc-step-size:          number of data bytes covered by a single ECC step
-
-The following ECC strength and step size are currently supported:
-
- - nand-ecc-strength = <1>, nand-ecc-step-size = <512>
- - nand-ecc-strength = <4>, nand-ecc-step-size = <512>
- - nand-ecc-strength = <8>, nand-ecc-step-size = <512>
-
-Example:
-
-	nand0: nand@43100000 {
-		compatible = "marvell,pxa3xx-nand";
-		reg = <0x43100000 90>;
-		interrupts = <45>;
-		dmas = <&pdma 97 0>;
-		dma-names = "data";
-		#address-cells = <1>;
-
-		marvell,nand-enable-arbiter;
-		marvell,nand-keep-config;
-		num-cs = <1>;
-
-		/* partitions (optional) */
-	};
-

Documentation/devicetree/bindings/mtd/sunxi-nand.txt

@@ -24,8 +24,8 @@ Optional properties:
 - allwinner,rb : shall contain the native Ready/Busy ids.
  or
 - rb-gpios : shall contain the gpios used as R/B pins.
-- nand-ecc-mode : one of the supported ECC modes ("hw", "hw_syndrome", "soft",
-  "soft_bch" or "none")
+- nand-ecc-mode : one of the supported ECC modes ("hw", "soft", "soft_bch" or
+		  "none")
 
 see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings.
 

Documentation/driver-api/mtdnand.rst

@@ -967,10 +967,10 @@ API functions which are exported. Each function has a short description
 which is marked with an [XXX] identifier. See the chapter "Documentation
 hints" for an explanation.
 
-.. kernel-doc:: drivers/mtd/nand/nand_base.c
+.. kernel-doc:: drivers/mtd/nand/raw/nand_base.c
    :export:
 
-.. kernel-doc:: drivers/mtd/nand/nand_ecc.c
+.. kernel-doc:: drivers/mtd/nand/raw/nand_ecc.c
    :export:
 
 Internal Functions Provided
@@ -982,10 +982,10 @@ marked with an [XXX] identifier. See the chapter "Documentation hints"
 for an explanation. The functions marked with [DEFAULT] might be
 relevant for a board driver developer.
 
-.. kernel-doc:: drivers/mtd/nand/nand_base.c
+.. kernel-doc:: drivers/mtd/nand/raw/nand_base.c
    :internal:
 
-.. kernel-doc:: drivers/mtd/nand/nand_bbt.c
+.. kernel-doc:: drivers/mtd/nand/raw/nand_bbt.c
    :internal:
 
 Credits

Documentation/gpio/drivers-on-gpio.txt

@@ -74,8 +74,8 @@ hardware descriptions such as device tree or ACPI:
   it from 1-to-0-to-1. If that hardware does not receive its "ping"
   periodically, it will reset the system.
 
-- gpio-nand: drivers/mtd/nand/gpio.c is used to connect a NAND flash chip to
-  a set of simple GPIO lines: RDY, NCE, ALE, CLE, NWP. It interacts with the
+- gpio-nand: drivers/mtd/nand/raw/gpio.c is used to connect a NAND flash chip
+  to a set of simple GPIO lines: RDY, NCE, ALE, CLE, NWP. It interacts with the
   NAND flash MTD subsystem and provides chip access and partition parsing like
   any other NAND driving hardware.
 

MAINTAINERS

@@ -1232,7 +1232,7 @@ F:	arch/arm/boot/dts/aspeed-*
 F:	drivers/*/*aspeed*
 
 ARM/ATMEL AT91 Clock Support
-M:	Boris Brezillon <boris.brezillon@free-electrons.com>
+M:	Boris Brezillon <boris.brezillon@bootlin.com>
 S:	Maintained
 F:	drivers/clk/at91
 
@@ -1710,7 +1710,7 @@ F:	drivers/input/keyboard/w90p910_keypad.c
 F:	drivers/input/touchscreen/w90p910_ts.c
 F:	drivers/watchdog/nuc900_wdt.c
 F:	drivers/net/ethernet/nuvoton/w90p910_ether.c
-F:	drivers/mtd/nand/nuc900_nand.c
+F:	drivers/mtd/nand/raw/nuc900_nand.c
 F:	drivers/rtc/rtc-nuc900.c
 F:	drivers/spi/spi-nuc900.c
 F:	drivers/usb/host/ehci-w90x900.c
@@ -3014,7 +3014,7 @@ M:	Kamal Dasu <kdasu.kdev@gmail.com>
 L:	linux-mtd@lists.infradead.org
 L:	bcm-kernel-feedback-list@broadcom.com
 S:	Maintained
-F:	drivers/mtd/nand/brcmnand/
+F:	drivers/mtd/nand/raw/brcmnand/
 
 BROADCOM STB DPFE DRIVER
 M:	Markus Mayer <mmayer@broadcom.com>
@@ -4116,7 +4116,7 @@ DENALI NAND DRIVER
 M:	Masahiro Yamada <yamada.masahiro@socionext.com>
 L:	linux-mtd@lists.infradead.org
 S:	Supported
-F:	drivers/mtd/nand/denali*
+F:	drivers/mtd/nand/raw/denali*
 
 DESIGNWARE USB2 DRD IP DRIVER
 M:	John Youn <johnyoun@synopsys.com>
@@ -4644,7 +4644,7 @@ F:	Documentation/gpu/meson.rst
 T:	git git://anongit.freedesktop.org/drm/drm-misc
 
 DRM DRIVERS FOR ATMEL HLCDC
-M:	Boris Brezillon <boris.brezillon@free-electrons.com>
+M:	Boris Brezillon <boris.brezillon@bootlin.com>
 L:	dri-devel@lists.freedesktop.org
 S:	Supported
 F:	drivers/gpu/drm/atmel-hlcdc/
@@ -5646,7 +5646,7 @@ FREESCALE GPMI NAND DRIVER
 M:	Han Xu <han.xu@nxp.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
-F:	drivers/mtd/nand/gpmi-nand/*
+F:	drivers/mtd/nand/raw/gpmi-nand/*
 
 FREESCALE I2C CPM DRIVER
 M:	Jochen Friedrich <jochen@scram.de>
@@ -6955,7 +6955,7 @@ INGENIC JZ4780 NAND DRIVER
 M:	Harvey Hunt <harveyhuntnexus@gmail.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
-F:	drivers/mtd/nand/jz4780_*
+F:	drivers/mtd/nand/raw/jz4780_*
 
 INOTIFY
 M:	Jan Kara <jack@suse.cz>
@@ -8412,7 +8412,7 @@ F:	include/uapi/drm/armada_drm.h
 F:	Documentation/devicetree/bindings/display/armada/
 
 MARVELL CRYPTO DRIVER
-M:	Boris Brezillon <boris.brezillon@free-electrons.com>
+M:	Boris Brezillon <boris.brezillon@bootlin.com>
 M:	Arnaud Ebalard <arno@natisbad.org>
 F:	drivers/crypto/marvell/
 S:	Maintained
@@ -8471,10 +8471,10 @@ S:	Odd Fixes
 F:	drivers/net/wireless/marvell/mwl8k.c
 
 MARVELL NAND CONTROLLER DRIVER
-M:	Miquel Raynal <miquel.raynal@free-electrons.com>
+M:	Miquel Raynal <miquel.raynal@bootlin.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
-F:	drivers/mtd/nand/marvell_nand.c
+F:	drivers/mtd/nand/raw/marvell_nand.c
 F:	Documentation/devicetree/bindings/mtd/marvell-nand.txt
 
 MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
@@ -9034,7 +9034,7 @@ F:	mm/
 MEMORY TECHNOLOGY DEVICES (MTD)
 M:	David Woodhouse <dwmw2@infradead.org>
 M:	Brian Norris <computersforpeace@gmail.com>
-M:	Boris Brezillon <boris.brezillon@free-electrons.com>
+M:	Boris Brezillon <boris.brezillon@bootlin.com>
 M:	Marek Vasut <marek.vasut@gmail.com>
 M:	Richard Weinberger <richard@nod.at>
 L:	linux-mtd@lists.infradead.org
@@ -9135,7 +9135,7 @@ M:	Wenyou Yang <wenyou.yang@microchip.com>
 M:	Josh Wu <rainyfeeling@outlook.com>
 L:	linux-mtd@lists.infradead.org
 S:	Supported
-F:	drivers/mtd/nand/atmel/*
+F:	drivers/mtd/nand/raw/atmel/*
 F:	Documentation/devicetree/bindings/mtd/atmel-nand.txt
 
 MICROCHIP KSZ SERIES ETHERNET SWITCH DRIVER
@@ -9451,7 +9451,7 @@ S:	Supported
 F:	drivers/net/ethernet/myricom/myri10ge/
 
 NAND FLASH SUBSYSTEM
-M:	Boris Brezillon <boris.brezillon@free-electrons.com>
+M:	Boris Brezillon <boris.brezillon@bootlin.com>
 R:	Richard Weinberger <richard@nod.at>
 L:	linux-mtd@lists.infradead.org
 W:	http://www.linux-mtd.infradead.org/
@@ -10205,7 +10205,7 @@ ONENAND FLASH DRIVER
 M:	Kyungmin Park <kyungmin.park@samsung.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
-F:	drivers/mtd/onenand/
+F:	drivers/mtd/nand/onenand/
 F:	include/linux/mtd/onenand*.h
 
 ONSTREAM SCSI TAPE DRIVER
@@ -11326,12 +11326,6 @@ F:	include/sound/pxa2xx-lib.h
 F:	sound/arm/pxa*
 F:	sound/soc/pxa/
 
-PXA3xx NAND FLASH DRIVER
-M:	Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-L:	linux-mtd@lists.infradead.org
-S:	Maintained
-F:	drivers/mtd/nand/pxa3xx_nand.c
-
 QAT DRIVER
 M:	Giovanni Cabiddu <giovanni.cabiddu@intel.com>
 L:	qat-linux@intel.com
@@ -11814,8 +11808,8 @@ F:	drivers/memstick/host/r592.*
 RICOH SMARTMEDIA/XD DRIVER
 M:	Maxim Levitsky <maximlevitsky@gmail.com>
 S:	Maintained
-F:	drivers/mtd/nand/r852.c
-F:	drivers/mtd/nand/r852.h
+F:	drivers/mtd/nand/raw/r852.c
+F:	drivers/mtd/nand/raw/r852.h
 
 RISC-V ARCHITECTURE
 M:	Palmer Dabbelt <palmer@sifive.com>
@@ -14633,7 +14627,7 @@ VF610 NAND DRIVER
 M:	Stefan Agner <stefan@agner.ch>
 L:	linux-mtd@lists.infradead.org
 S:	Supported
-F:	drivers/mtd/nand/vf610_nfc.c
+F:	drivers/mtd/nand/raw/vf610_nfc.c
 
 VFAT/FAT/MSDOS FILESYSTEM
 M:	OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>

arch/arm/boot/dts/pxa3xx.dtsi

@@ -117,15 +117,15 @@
 			status = "disabled";
 		};
 
-		nand0: nand@43100000 {
-			compatible = "marvell,pxa3xx-nand";
+		nand_controller: nand-controller@43100000 {
+			compatible = "marvell,pxa3xx-nand-controller";
 			reg = <0x43100000 90>;
 			interrupts = <45>;
 			clocks = <&clks CLK_NAND>;
 			dmas = <&pdma 97 3>;
 			dma-names = "data";
 			#address-cells = <1>;
-			#size-cells = <1>;	
+			#size-cells = <0>;
 			status = "disabled";
 		};
 

arch/arm/configs/cm_x300_defconfig

@@ -49,7 +49,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PXA3xx=y
+CONFIG_MTD_NAND_MARVELL=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y

arch/arm/configs/pxa3xx_defconfig

@@ -32,8 +32,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PXA3xx=y
-CONFIG_MTD_NAND_PXA3xx_BUILTIN=y
+CONFIG_MTD_NAND_MARVELL=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=y

arch/arm/configs/pxa_defconfig

@@ -197,7 +197,7 @@ CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
 CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
 CONFIG_MTD_NAND_SHARPSL=m
-CONFIG_MTD_NAND_PXA3xx=m
+CONFIG_MTD_NAND_MARVELL=m
 CONFIG_MTD_NAND_CM_X270=m
 CONFIG_MTD_NAND_TMIO=m
 CONFIG_MTD_NAND_BRCMNAND=m

arch/arm/configs/raumfeld_defconfig

@@ -33,7 +33,7 @@ CONFIG_NFTL=y
 CONFIG_NFTL_RW=y
 CONFIG_MTD_BLOCK2MTD=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PXA3xx=y
+CONFIG_MTD_NAND_MARVELL=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_ISL29003=y

arch/arm/mach-mmp/aspenite.c

@@ -172,10 +172,8 @@ static struct mtd_partition aspenite_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data aspenite_nand_info = {
-	.enable_arbiter	= 1,
-	.num_cs = 1,
-	.parts[0]	= aspenite_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(aspenite_nand_partitions),
+	.parts		= aspenite_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(aspenite_nand_partitions),
 };
 
 static struct i2c_board_info aspenite_i2c_info[] __initdata = {

arch/arm/mach-mmp/ttc_dkb.c

@@ -178,11 +178,8 @@ static struct mv_usb_platform_data ttc_usb_pdata = {
 #endif
 #endif
 
-#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx)
-static struct pxa3xx_nand_platform_data dkb_nand_info = {
-	.enable_arbiter = 1,
-	.num_cs = 1,
-};
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
+static struct pxa3xx_nand_platform_data dkb_nand_info = {};
 #endif
 
 #if IS_ENABLED(CONFIG_MMP_DISP)
@@ -275,7 +272,7 @@ static void __init ttc_dkb_init(void)
 
 	/* on-chip devices */
 	pxa910_add_uart(1);
-#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 	pxa910_add_nand(&dkb_nand_info);
 #endif
 

arch/arm/mach-pxa/cm-x300.c

@@ -391,7 +391,7 @@ static void __init cm_x300_init_ac97(void)
 static inline void cm_x300_init_ac97(void) {}
 #endif
 
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 static struct mtd_partition cm_x300_nand_partitions[] = {
 	[0] = {
 		.name        = "OBM",
@@ -429,11 +429,9 @@ static struct mtd_partition cm_x300_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
-	.enable_arbiter	= 1,
 	.keep_config	= 1,
-	.num_cs		= 1,
-	.parts[0]	= cm_x300_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(cm_x300_nand_partitions),
+	.parts		= cm_x300_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(cm_x300_nand_partitions),
 };
 
 static void __init cm_x300_init_nand(void)

arch/arm/mach-pxa/colibri-pxa3xx.c

@@ -110,7 +110,7 @@ void __init colibri_pxa3xx_init_lcd(int bl_pin)
 }
 #endif
 
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 static struct mtd_partition colibri_nand_partitions[] = {
 	{
 		.name        = "bootloader",
@@ -138,11 +138,9 @@ static struct mtd_partition colibri_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data colibri_nand_info = {
-	.enable_arbiter	= 1,
 	.keep_config	= 1,
-	.num_cs		= 1,
-	.parts[0]	= colibri_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(colibri_nand_partitions),
+	.parts		= colibri_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(colibri_nand_partitions),
 };
 
 void __init colibri_pxa3xx_init_nand(void)

arch/arm/mach-pxa/colibri.h

@@ -46,7 +46,7 @@ static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
 extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
 #endif
 
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 extern void colibri_pxa3xx_init_nand(void);
 #else
 static inline void colibri_pxa3xx_init_nand(void) {}

arch/arm/mach-pxa/littleton.c

@@ -291,7 +291,7 @@ static void __init littleton_init_mmc(void)
 static inline void littleton_init_mmc(void) {}
 #endif
 
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 static struct mtd_partition littleton_nand_partitions[] = {
 	[0] = {
 		.name        = "Bootloader",
@@ -329,10 +329,8 @@ static struct mtd_partition littleton_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data littleton_nand_info = {
-	.enable_arbiter	= 1,
-	.num_cs		= 1,
-	.parts[0]	= littleton_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(littleton_nand_partitions),
+	.parts		= littleton_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(littleton_nand_partitions),
 };
 
 static void __init littleton_init_nand(void)
@@ -341,7 +339,7 @@ static void __init littleton_init_nand(void)
 }
 #else
 static inline void littleton_init_nand(void) {}
-#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
 
 #if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
 static struct led_info littleton_da9034_leds[] = {

arch/arm/mach-pxa/mxm8x10.c

@@ -359,7 +359,7 @@ void __init mxm_8x10_ac97_init(void)
 }
 
 /* NAND flash Support */
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 #define NAND_BLOCK_SIZE SZ_128K
 #define NB(x)           (NAND_BLOCK_SIZE * (x))
 static struct mtd_partition mxm_8x10_nand_partitions[] = {
@@ -389,11 +389,9 @@ static struct mtd_partition mxm_8x10_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
-	.enable_arbiter	= 1,
 	.keep_config	= 1,
-	.num_cs		= 1,
-	.parts[0]	= mxm_8x10_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(mxm_8x10_nand_partitions)
+	.parts		= mxm_8x10_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(mxm_8x10_nand_partitions)
 };
 
 static void __init mxm_8x10_nand_init(void)
@@ -402,7 +400,7 @@ static void __init mxm_8x10_nand_init(void)
 }
 #else
 static inline void mxm_8x10_nand_init(void) {}
-#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
 
 /* Ethernet support: Davicom DM9000 */
 static struct resource dm9k_resources[] = {

arch/arm/mach-pxa/raumfeld.c

@@ -346,11 +346,9 @@ static struct mtd_partition raumfeld_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
-	.enable_arbiter	= 1,
 	.keep_config	= 1,
-	.num_cs		= 1,
-	.parts[0]	= raumfeld_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(raumfeld_nand_partitions),
+	.parts		= raumfeld_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(raumfeld_nand_partitions),
 };
 
 /**

arch/arm/mach-pxa/zylonite.c

@@ -338,7 +338,7 @@ static void __init zylonite_init_keypad(void)
 static inline void zylonite_init_keypad(void) {}
 #endif
 
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 static struct mtd_partition zylonite_nand_partitions[] = {
 	[0] = {
 		.name        = "Bootloader",
@@ -376,10 +376,8 @@ static struct mtd_partition zylonite_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data zylonite_nand_info = {
-	.enable_arbiter	= 1,
-	.num_cs		= 1,
-	.parts[0]	= zylonite_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(zylonite_nand_partitions),
+	.parts		= zylonite_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(zylonite_nand_partitions),
 };
 
 static void __init zylonite_init_nand(void)
@@ -388,7 +386,7 @@ static void __init zylonite_init_nand(void)
 }
 #else
 static inline void zylonite_init_nand(void) {}
-#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
 
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static struct pxaohci_platform_data zylonite_ohci_info = {

arch/cris/arch-v32/drivers/mach-a3/nandflash.c

@@ -3,7 +3,7 @@
  *
  *  Copyright (c) 2007
  *
- *  Derived from drivers/mtd/nand/spia.c
+ *  Derived from drivers/mtd/nand/spia.c (removed in v3.8)
  *	  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
  *
  * This program is free software; you can redistribute it and/or modify

arch/cris/arch-v32/drivers/mach-fs/nandflash.c

@@ -3,7 +3,7 @@
  *
  *  Copyright (c) 2004
  *
- *  Derived from drivers/mtd/nand/spia.c
+ *  Derived from drivers/mtd/nand/spia.c (removed in v3.8)
  *	  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
  *
  * This program is free software; you can redistribute it and/or modify

drivers/mtd/Kconfig

@@ -333,8 +333,6 @@ source "drivers/mtd/devices/Kconfig"
 
 source "drivers/mtd/nand/Kconfig"
 
-source "drivers/mtd/onenand/Kconfig"
-
 source "drivers/mtd/lpddr/Kconfig"
 
 source "drivers/mtd/spi-nor/Kconfig"

drivers/mtd/Makefile

@@ -32,7 +32,7 @@ obj-$(CONFIG_MTD_SWAP)		+= mtdswap.o
 nftl-objs		:= nftlcore.o nftlmount.o
 inftl-objs		:= inftlcore.o inftlmount.o
 
-obj-y		+= chips/ lpddr/ maps/ devices/ nand/ onenand/ tests/
+obj-y		+= chips/ lpddr/ maps/ devices/ nand/ tests/
 
 obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor/
 obj-$(CONFIG_MTD_UBI)		+= ubi/

drivers/mtd/nand/Kconfig

-config MTD_NAND_ECC
+config MTD_NAND_CORE
 	tristate
 
-config MTD_NAND_ECC_SMC
-	bool "NAND ECC Smart Media byte order"
-	depends on MTD_NAND_ECC
-	default n
-	help
-	  Software ECC according to the Smart Media Specification.
-	  The original Linux implementation had byte 0 and 1 swapped.
+source "drivers/mtd/nand/onenand/Kconfig"
 
-
-menuconfig MTD_NAND
-	tristate "NAND Device Support"
-	depends on MTD
-	select MTD_NAND_ECC
-	help
-	  This enables support for accessing all type of NAND flash
-	  devices. For further information see
-	  <http://www.linux-mtd.infradead.org/doc/nand.html>.
-
-if MTD_NAND
-
-config MTD_NAND_BCH
-	tristate
-	select BCH
-	depends on MTD_NAND_ECC_BCH
-	default MTD_NAND
-
-config MTD_NAND_ECC_BCH
-	bool "Support software BCH ECC"
-	default n
-	help
-	  This enables support for software BCH error correction. Binary BCH
-	  codes are more powerful and cpu intensive than traditional Hamming
-	  ECC codes. They are used with NAND devices requiring more than 1 bit
-	  of error correction.
-
-config MTD_SM_COMMON
-	tristate
-	default n
-
-config MTD_NAND_DENALI
-	tristate
-
-config MTD_NAND_DENALI_PCI
-        tristate "Support Denali NAND controller on Intel Moorestown"
-	select MTD_NAND_DENALI
-	depends on HAS_DMA && PCI
-        help
-          Enable the driver for NAND flash on Intel Moorestown, using the
-          Denali NAND controller core.
-
-config MTD_NAND_DENALI_DT
-	tristate "Support Denali NAND controller as a DT device"
-	select MTD_NAND_DENALI
-	depends on HAS_DMA && HAVE_CLK && OF
-	help
-	  Enable the driver for NAND flash on platforms using a Denali NAND
-	  controller as a DT device.
-
-config MTD_NAND_GPIO
-	tristate "GPIO assisted NAND Flash driver"
-	depends on GPIOLIB || COMPILE_TEST
-	depends on HAS_IOMEM
-	help
-	  This enables a NAND flash driver where control signals are
-	  connected to GPIO pins, and commands and data are communicated
-	  via a memory mapped interface.
-
-config MTD_NAND_AMS_DELTA
-	tristate "NAND Flash device on Amstrad E3"
-	depends on MACH_AMS_DELTA
-	default y
-	help
-	  Support for NAND flash on Amstrad E3 (Delta).
-
-config MTD_NAND_OMAP2
-	tristate "NAND Flash device on OMAP2, OMAP3, OMAP4 and Keystone"
-	depends on (ARCH_OMAP2PLUS || ARCH_KEYSTONE)
-	help
-          Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4
-	  and Keystone platforms.
-
-config MTD_NAND_OMAP_BCH
-	depends on MTD_NAND_OMAP2
-	bool "Support hardware based BCH error correction"
-	default n
-	select BCH
-	help
-	  This config enables the ELM hardware engine, which can be used to
-	  locate and correct errors when using BCH ECC scheme. This offloads
-	  the cpu from doing ECC error searching and correction. However some
-	  legacy OMAP families like OMAP2xxx, OMAP3xxx do not have ELM engine
-	  so this is optional for them.
-
-config MTD_NAND_OMAP_BCH_BUILD
-	def_tristate MTD_NAND_OMAP2 && MTD_NAND_OMAP_BCH
-
-config MTD_NAND_RICOH
-	tristate "Ricoh xD card reader"
-	default n
-	depends on PCI
-	select MTD_SM_COMMON
-	help
-	  Enable support for Ricoh R5C852 xD card reader
-	  You also need to enable ether
-	  NAND SSFDC (SmartMedia) read only translation layer' or new
-	  expermental, readwrite
-	  'SmartMedia/xD new translation layer'
-
-config MTD_NAND_AU1550
-	tristate "Au1550/1200 NAND support"
-	depends on MIPS_ALCHEMY
-	help
-	  This enables the driver for the NAND flash controller on the
-	  AMD/Alchemy 1550 SOC.
-
-config MTD_NAND_BF5XX
-	tristate "Blackfin on-chip NAND Flash Controller driver"
-	depends on BF54x || BF52x
-	help
-	  This enables the Blackfin on-chip NAND flash controller
-
-	  No board specific support is done by this driver, each board
-	  must advertise a platform_device for the driver to attach.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called bf5xx-nand.
-
-config MTD_NAND_BF5XX_HWECC
-	bool "BF5XX NAND Hardware ECC"
-	default y
-	depends on MTD_NAND_BF5XX
-	help
-	  Enable the use of the BF5XX's internal ECC generator when
-	  using NAND.
-
-config MTD_NAND_BF5XX_BOOTROM_ECC
-	bool "Use Blackfin BootROM ECC Layout"
-	default n
-	depends on MTD_NAND_BF5XX_HWECC
-	help
-	  If you wish to modify NAND pages and allow the Blackfin on-chip
-	  BootROM to boot from them, say Y here.  This is only necessary
-	  if you are booting U-Boot out of NAND and you wish to update
-	  U-Boot from Linux' userspace.  Otherwise, you should say N here.
-
-	  If unsure, say N.
-
-config MTD_NAND_S3C2410
-	tristate "NAND Flash support for Samsung S3C SoCs"
-	depends on ARCH_S3C24XX || ARCH_S3C64XX
-	help
-	  This enables the NAND flash controller on the S3C24xx and S3C64xx
-	  SoCs
-
-	  No board specific support is done by this driver, each board
-	  must advertise a platform_device for the driver to attach.
-
-config MTD_NAND_S3C2410_DEBUG
-	bool "Samsung S3C NAND driver debug"
-	depends on MTD_NAND_S3C2410
-	help
-	  Enable debugging of the S3C NAND driver
-
-config MTD_NAND_NDFC
-	tristate "NDFC NanD Flash Controller"
-	depends on 4xx
-	select MTD_NAND_ECC_SMC
-	help
-	 NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
-
-config MTD_NAND_S3C2410_CLKSTOP
-	bool "Samsung S3C NAND IDLE clock stop"
-	depends on MTD_NAND_S3C2410
-	default n
-	help
-	  Stop the clock to the NAND controller when there is no chip
-	  selected to save power. This will mean there is a small delay
-	  when the is NAND chip selected or released, but will save
-	  approximately 5mA of power when there is nothing happening.
-
-config MTD_NAND_TANGO
-	tristate "NAND Flash support for Tango chips"
-	depends on ARCH_TANGO || COMPILE_TEST
-	depends on HAS_DMA
-	help
-	  Enables the NAND Flash controller on Tango chips.
-
-config MTD_NAND_DISKONCHIP
-	tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation)"
-	depends on HAS_IOMEM
-	select REED_SOLOMON
-	select REED_SOLOMON_DEC16
-	help
-	  This is a reimplementation of M-Systems DiskOnChip 2000,
-	  Millennium and Millennium Plus as a standard NAND device driver,
-	  as opposed to the earlier self-contained MTD device drivers.
-	  This should enable, among other things, proper JFFS2 operation on
-	  these devices.
-
-config MTD_NAND_DISKONCHIP_PROBE_ADVANCED
-        bool "Advanced detection options for DiskOnChip"
-        depends on MTD_NAND_DISKONCHIP
-        help
-          This option allows you to specify nonstandard address at which to
-          probe for a DiskOnChip, or to change the detection options.  You
-          are unlikely to need any of this unless you are using LinuxBIOS.
-          Say 'N'.
-
-config MTD_NAND_DISKONCHIP_PROBE_ADDRESS
-        hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED
-        depends on MTD_NAND_DISKONCHIP
-        default "0"
-        ---help---
-        By default, the probe for DiskOnChip devices will look for a
-        DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
-        This option allows you to specify a single address at which to probe
-        for the device, which is useful if you have other devices in that
-        range which get upset when they are probed.
-
-        (Note that on PowerPC, the normal probe will only check at
-        0xE4000000.)
-
-        Normally, you should leave this set to zero, to allow the probe at
-        the normal addresses.
-
-config MTD_NAND_DISKONCHIP_PROBE_HIGH
-        bool "Probe high addresses"
-        depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED
-        help
-          By default, the probe for DiskOnChip devices will look for a
-          DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
-          This option changes to make it probe between 0xFFFC8000 and
-          0xFFFEE000.  Unless you are using LinuxBIOS, this is unlikely to be
-          useful to you.  Say 'N'.
-
-config MTD_NAND_DISKONCHIP_BBTWRITE
-	bool "Allow BBT writes on DiskOnChip Millennium and 2000TSOP"
-	depends on MTD_NAND_DISKONCHIP
-	help
-	  On DiskOnChip devices shipped with the INFTL filesystem (Millennium
-	  and 2000 TSOP/Alon), Linux reserves some space at the end of the
-	  device for the Bad Block Table (BBT).  If you have existing INFTL
-	  data on your device (created by non-Linux tools such as M-Systems'
-	  DOS drivers), your data might overlap the area Linux wants to use for
-	  the BBT.  If this is a concern for you, leave this option disabled and
-	  Linux will not write BBT data into this area.
-	  The downside of leaving this option disabled is that if bad blocks
-	  are detected by Linux, they will not be recorded in the BBT, which
-	  could cause future problems.
-	  Once you enable this option, new filesystems (INFTL or others, created
-	  in Linux or other operating systems) will not use the reserved area.
-	  The only reason not to enable this option is to prevent damage to
-	  preexisting filesystems.
-	  Even if you leave this disabled, you can enable BBT writes at module
-	  load time (assuming you build diskonchip as a module) with the module
-	  parameter "inftl_bbt_write=1".
-
-config MTD_NAND_DOCG4
-	tristate "Support for DiskOnChip G4"
-	depends on HAS_IOMEM
-	select BCH
-	select BITREVERSE
-	help
-	  Support for diskonchip G4 nand flash, found in various smartphones and
-	  PDAs, among them the Palm Treo680, HTC Prophet and Wizard, Toshiba
-	  Portege G900, Asus P526, and O2 XDA Zinc.
-
-	  With this driver you will be able to use UBI and create a ubifs on the
-	  device, so you may wish to consider enabling UBI and UBIFS as well.
-
-	  These devices ship with the Mys/Sandisk SAFTL formatting, for which
-	  there is currently no mtd parser, so you may want to use command line
-	  partitioning to segregate write-protected blocks. On the Treo680, the
-	  first five erase blocks (256KiB each) are write-protected, followed
-	  by the block containing the saftl partition table.  This is probably
-	  typical.
-
-config MTD_NAND_SHARPSL
-	tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
-	depends on ARCH_PXA
-
-config MTD_NAND_CAFE
-	tristate "NAND support for OLPC CAFÉ chip"
-	depends on PCI
-	select REED_SOLOMON
-	select REED_SOLOMON_DEC16
-	help
-	  Use NAND flash attached to the CAFÉ chip designed for the OLPC
-	  laptop.
-
-config MTD_NAND_CS553X
-	tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
-	depends on X86_32
-	depends on !UML && HAS_IOMEM
-	help
-	  The CS553x companion chips for the AMD Geode processor
-	  include NAND flash controllers with built-in hardware ECC
-	  capabilities; enabling this option will allow you to use
-	  these. The driver will check the MSRs to verify that the
-	  controller is enabled for NAND, and currently requires that
-	  the controller be in MMIO mode.
-
-	  If you say "m", the module will be called cs553x_nand.
-
-config MTD_NAND_ATMEL
-	tristate "Support for NAND Flash / SmartMedia on AT91"
-	depends on ARCH_AT91
-	select MFD_ATMEL_SMC
-	help
-	  Enables support for NAND Flash / Smart Media Card interface
-	  on Atmel AT91 processors.
-
-config MTD_NAND_PXA3xx
-	tristate "NAND support on PXA3xx and Armada 370/XP"
-	depends on !MTD_NAND_MARVELL
-	depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU
-	help
-
-	  This enables the driver for the NAND flash device found on
-	  PXA3xx processors (NFCv1) and also on 32-bit Armada
-	  platforms (XP, 370, 375, 38x, 39x) and 64-bit Armada
-	  platforms (7K, 8K) (NFCv2).
-
-config MTD_NAND_MARVELL
-	tristate "NAND controller support on Marvell boards"
-	depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU || \
-		   COMPILE_TEST
-	depends on HAS_IOMEM
-	help
-	  This enables the NAND flash controller driver for Marvell boards,
-	  including:
-	  - PXA3xx processors (NFCv1)
-	  - 32-bit Armada platforms (XP, 37x, 38x, 39x) (NFCv2)
-	  - 64-bit Aramda platforms (7k, 8k) (NFCv2)
-
-config MTD_NAND_SLC_LPC32XX
-	tristate "NXP LPC32xx SLC Controller"
-	depends on ARCH_LPC32XX
-	help
-	  Enables support for NXP's LPC32XX SLC (i.e. for Single Level Cell
-	  chips) NAND controller. This is the default for the PHYTEC 3250
-	  reference board which contains a NAND256R3A2CZA6 chip.
-
-	  Please check the actual NAND chip connected and its support
-	  by the SLC NAND controller.
-
-config MTD_NAND_MLC_LPC32XX
-	tristate "NXP LPC32xx MLC Controller"
-	depends on ARCH_LPC32XX
-	help
-	  Uses the LPC32XX MLC (i.e. for Multi Level Cell chips) NAND
-	  controller. This is the default for the WORK92105 controller
-	  board.
-
-	  Please check the actual NAND chip connected and its support
-	  by the MLC NAND controller.
-
-config MTD_NAND_CM_X270
-	tristate "Support for NAND Flash on CM-X270 modules"
-	depends on MACH_ARMCORE
-
-config MTD_NAND_PASEMI
-	tristate "NAND support for PA Semi PWRficient"
-	depends on PPC_PASEMI
-	help
-	  Enables support for NAND Flash interface on PA Semi PWRficient
-	  based boards
-
-config MTD_NAND_TMIO
-	tristate "NAND Flash device on Toshiba Mobile IO Controller"
-	depends on MFD_TMIO
-	help
-	  Support for NAND flash connected to a Toshiba Mobile IO
-	  Controller in some PDAs, including the Sharp SL6000x.
-
-config MTD_NAND_NANDSIM
-	tristate "Support for NAND Flash Simulator"
-	help
-	  The simulator may simulate various NAND flash chips for the
-	  MTD nand layer.
-
-config MTD_NAND_GPMI_NAND
-        tristate "GPMI NAND Flash Controller driver"
-        depends on MTD_NAND && MXS_DMA
-        help
-	 Enables NAND Flash support for IMX23, IMX28 or IMX6.
-	 The GPMI controller is very powerful, with the help of BCH
-	 module, it can do the hardware ECC. The GPMI supports several
-	 NAND flashs at the same time.
-
-config MTD_NAND_BRCMNAND
-	tristate "Broadcom STB NAND controller"
-	depends on ARM || ARM64 || MIPS
-	help
-	  Enables the Broadcom NAND controller driver. The controller was
-	  originally designed for Set-Top Box but is used on various BCM7xxx,
-	  BCM3xxx, BCM63xxx, iProc/Cygnus and more.
-
-config MTD_NAND_BCM47XXNFLASH
-	tristate "Support for NAND flash on BCM4706 BCMA bus"
-	depends on BCMA_NFLASH
-	help
-	  BCMA bus can have various flash memories attached, they are
-	  registered by bcma as platform devices. This enables driver for
-	  NAND flash memories. For now only BCM4706 is supported.
-
-config MTD_NAND_PLATFORM
-	tristate "Support for generic platform NAND driver"
-	depends on HAS_IOMEM
-	help
-	  This implements a generic NAND driver for on-SOC platform
-	  devices. You will need to provide platform-specific functions
-	  via platform_data.
-
-config MTD_NAND_ORION
-	tristate "NAND Flash support for Marvell Orion SoC"
-	depends on PLAT_ORION
-	help
-	  This enables the NAND flash controller on Orion machines.
-
-	  No board specific support is done by this driver, each board
-	  must advertise a platform_device for the driver to attach.
-
-config MTD_NAND_OXNAS
-	tristate "NAND Flash support for Oxford Semiconductor SoC"
-	depends on ARCH_OXNAS || COMPILE_TEST
-	depends on HAS_IOMEM
-	help
-	  This enables the NAND flash controller on Oxford Semiconductor SoCs.
-
-config MTD_NAND_FSL_ELBC
-	tristate "NAND support for Freescale eLBC controllers"
-	depends on FSL_SOC
-	select FSL_LBC
-	help
-	  Various Freescale chips, including the 8313, include a NAND Flash
-	  Controller Module with built-in hardware ECC capabilities.
-	  Enabling this option will enable you to use this to control
-	  external NAND devices.
-
-config MTD_NAND_FSL_IFC
-	tristate "NAND support for Freescale IFC controller"
-	depends on FSL_SOC || ARCH_LAYERSCAPE || SOC_LS1021A
-	select FSL_IFC
-	select MEMORY
-	help
-	  Various Freescale chips e.g P1010, include a NAND Flash machine
-	  with built-in hardware ECC capabilities.
-	  Enabling this option will enable you to use this to control
-	  external NAND devices.
-
-config MTD_NAND_FSL_UPM
-	tristate "Support for NAND on Freescale UPM"
-	depends on PPC_83xx || PPC_85xx
-	select FSL_LBC
-	help
-	  Enables support for NAND Flash chips wired onto Freescale PowerPC
-	  processor localbus with User-Programmable Machine support.
-
-config MTD_NAND_MPC5121_NFC
-	tristate "MPC5121 built-in NAND Flash Controller support"
-	depends on PPC_MPC512x
-	help
-	  This enables the driver for the NAND flash controller on the
-	  MPC5121 SoC.
-
-config MTD_NAND_VF610_NFC
-	tristate "Support for Freescale NFC for VF610/MPC5125"
-	depends on (SOC_VF610 || COMPILE_TEST)
-	depends on HAS_IOMEM
-	help
-	  Enables support for NAND Flash Controller on some Freescale
-	  processors like the VF610, MPC5125, MCF54418 or Kinetis K70.
-	  The driver supports a maximum 2k page size. With 2k pages and
-	  64 bytes or more of OOB, hardware ECC with up to 32-bit error
-	  correction is supported. Hardware ECC is only enabled through
-	  device tree.
-
-config MTD_NAND_MXC
-	tristate "MXC NAND support"
-	depends on ARCH_MXC
-	help
-	  This enables the driver for the NAND flash controller on the
-	  MXC processors.
-
-config MTD_NAND_SH_FLCTL
-	tristate "Support for NAND on Renesas SuperH FLCTL"
-	depends on SUPERH || COMPILE_TEST
-	depends on HAS_IOMEM
-	depends on HAS_DMA
-	help
-	  Several Renesas SuperH CPU has FLCTL. This option enables support
-	  for NAND Flash using FLCTL.
-
-config MTD_NAND_DAVINCI
-        tristate "Support NAND on DaVinci/Keystone SoC"
-        depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF)
-        help
-	  Enable the driver for NAND flash chips on Texas Instruments
-	  DaVinci/Keystone processors.
-
-config MTD_NAND_TXX9NDFMC
-	tristate "NAND Flash support for TXx9 SoC"
-	depends on SOC_TX4938 || SOC_TX4939
-	help
-	  This enables the NAND flash controller on the TXx9 SoCs.
-
-config MTD_NAND_SOCRATES
-	tristate "Support for NAND on Socrates board"
-	depends on SOCRATES
-	help
-	  Enables support for NAND Flash chips wired onto Socrates board.
-
-config MTD_NAND_NUC900
-	tristate "Support for NAND on Nuvoton NUC9xx/w90p910 evaluation boards."
-	depends on ARCH_W90X900
-	help
-	  This enables the driver for the NAND Flash on evaluation board based
-	  on w90p910 / NUC9xx.
-
-config MTD_NAND_JZ4740
-	tristate "Support for JZ4740 SoC NAND controller"
-	depends on MACH_JZ4740
-	help
-		Enables support for NAND Flash on JZ4740 SoC based boards.
-
-config MTD_NAND_JZ4780
-	tristate "Support for NAND on JZ4780 SoC"
-	depends on MACH_JZ4780 && JZ4780_NEMC
-	help
-	  Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
-	  based boards, using the BCH controller for hardware error correction.
-
-config MTD_NAND_FSMC
-	tristate "Support for NAND on ST Micros FSMC"
-	depends on OF
-	depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300
-	help
-	  Enables support for NAND Flash chips on the ST Microelectronics
-	  Flexible Static Memory Controller (FSMC)
-
-config MTD_NAND_XWAY
-	bool "Support for NAND on Lantiq XWAY SoC"
-	depends on LANTIQ && SOC_TYPE_XWAY
-	help
-	  Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
-	  to the External Bus Unit (EBU).
-
-config MTD_NAND_SUNXI
-	tristate "Support for NAND on Allwinner SoCs"
-	depends on ARCH_SUNXI
-	help
-	  Enables support for NAND Flash chips on Allwinner SoCs.
-
-config MTD_NAND_HISI504
-	tristate "Support for NAND controller on Hisilicon SoC Hip04"
-	depends on ARCH_HISI || COMPILE_TEST
-	depends on HAS_DMA
-	help
-	  Enables support for NAND controller on Hisilicon SoC Hip04.
-
-config MTD_NAND_QCOM
-	tristate "Support for NAND on QCOM SoCs"
-	depends on ARCH_QCOM
-	help
-	  Enables support for NAND flash chips on SoCs containing the EBI2 NAND
-	  controller. This controller is found on IPQ806x SoC.
-
-config MTD_NAND_MTK
-	tristate "Support for NAND controller on MTK SoCs"
-	depends on ARCH_MEDIATEK || COMPILE_TEST
-	depends on HAS_DMA
-	help
-	  Enables support for NAND controller on MTK SoCs.
-	  This controller is found on mt27xx, mt81xx, mt65xx SoCs.
-
-endif # MTD_NAND
+source "drivers/mtd/nand/raw/Kconfig"

drivers/mtd/nand/Makefile

 # SPDX-License-Identifier: GPL-2.0
-#
-# linux/drivers/nand/Makefile
-#
 
-obj-$(CONFIG_MTD_NAND)			+= nand.o
-obj-$(CONFIG_MTD_NAND_ECC)		+= nand_ecc.o
-obj-$(CONFIG_MTD_NAND_BCH)		+= nand_bch.o
-obj-$(CONFIG_MTD_SM_COMMON) 		+= sm_common.o
+nandcore-objs := core.o bbt.o
+obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
 
-obj-$(CONFIG_MTD_NAND_CAFE)		+= cafe_nand.o
-obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o
-obj-$(CONFIG_MTD_NAND_DENALI)		+= denali.o
-obj-$(CONFIG_MTD_NAND_DENALI_PCI)	+= denali_pci.o
-obj-$(CONFIG_MTD_NAND_DENALI_DT)	+= denali_dt.o
-obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
-obj-$(CONFIG_MTD_NAND_BF5XX)		+= bf5xx_nand.o
-obj-$(CONFIG_MTD_NAND_S3C2410)		+= s3c2410.o
-obj-$(CONFIG_MTD_NAND_TANGO)		+= tango_nand.o
-obj-$(CONFIG_MTD_NAND_DAVINCI)		+= davinci_nand.o
-obj-$(CONFIG_MTD_NAND_DISKONCHIP)	+= diskonchip.o
-obj-$(CONFIG_MTD_NAND_DOCG4)		+= docg4.o
-obj-$(CONFIG_MTD_NAND_FSMC)		+= fsmc_nand.o
-obj-$(CONFIG_MTD_NAND_SHARPSL)		+= sharpsl.o
-obj-$(CONFIG_MTD_NAND_NANDSIM)		+= nandsim.o
-obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
-obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
-obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel/
-obj-$(CONFIG_MTD_NAND_GPIO)		+= gpio.o
-omap2_nand-objs := omap2.o
-obj-$(CONFIG_MTD_NAND_OMAP2) 		+= omap2_nand.o
-obj-$(CONFIG_MTD_NAND_OMAP_BCH_BUILD)	+= omap_elm.o
-obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
-obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
-obj-$(CONFIG_MTD_NAND_MARVELL)		+= marvell_nand.o
-obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
-obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
-obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
-obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
-obj-$(CONFIG_MTD_NAND_OXNAS)		+= oxnas_nand.o
-obj-$(CONFIG_MTD_NAND_FSL_ELBC)		+= fsl_elbc_nand.o
-obj-$(CONFIG_MTD_NAND_FSL_IFC)		+= fsl_ifc_nand.o
-obj-$(CONFIG_MTD_NAND_FSL_UPM)		+= fsl_upm.o
-obj-$(CONFIG_MTD_NAND_SLC_LPC32XX)      += lpc32xx_slc.o
-obj-$(CONFIG_MTD_NAND_MLC_LPC32XX)      += lpc32xx_mlc.o
-obj-$(CONFIG_MTD_NAND_SH_FLCTL)		+= sh_flctl.o
-obj-$(CONFIG_MTD_NAND_MXC)		+= mxc_nand.o
-obj-$(CONFIG_MTD_NAND_SOCRATES)		+= socrates_nand.o
-obj-$(CONFIG_MTD_NAND_TXX9NDFMC)	+= txx9ndfmc.o
-obj-$(CONFIG_MTD_NAND_NUC900)		+= nuc900_nand.o
-obj-$(CONFIG_MTD_NAND_MPC5121_NFC)	+= mpc5121_nfc.o
-obj-$(CONFIG_MTD_NAND_VF610_NFC)	+= vf610_nfc.o
-obj-$(CONFIG_MTD_NAND_RICOH)		+= r852.o
-obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740_nand.o
-obj-$(CONFIG_MTD_NAND_JZ4780)		+= jz4780_nand.o jz4780_bch.o
-obj-$(CONFIG_MTD_NAND_GPMI_NAND)	+= gpmi-nand/
-obj-$(CONFIG_MTD_NAND_XWAY)		+= xway_nand.o
-obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH)	+= bcm47xxnflash/
-obj-$(CONFIG_MTD_NAND_SUNXI)		+= sunxi_nand.o
-obj-$(CONFIG_MTD_NAND_HISI504)	        += hisi504_nand.o
-obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmnand/
-obj-$(CONFIG_MTD_NAND_QCOM)		+= qcom_nandc.o
-obj-$(CONFIG_MTD_NAND_MTK)		+= mtk_ecc.o mtk_nand.o
-
-nand-objs := nand_base.o nand_bbt.o nand_timings.o nand_ids.o
-nand-objs += nand_amd.o
-nand-objs += nand_hynix.o
-nand-objs += nand_macronix.o
-nand-objs += nand_micron.o
-nand-objs += nand_samsung.o
-nand-objs += nand_toshiba.o
+obj-y	+= onenand/
+obj-y	+= raw/

drivers/mtd/nand/bbt.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017 Free Electrons
+ *
+ * Authors:
+ *	Boris Brezillon <boris.brezillon@free-electrons.com>
+ *	Peter Pan <peterpandong@micron.com>
+ */
+
+#define pr_fmt(fmt)	"nand-bbt: " fmt
+
+#include <linux/mtd/nand.h>
+#include <linux/slab.h>
+
+/**
+ * nanddev_bbt_init() - Initialize the BBT (Bad Block Table)
+ * @nand: NAND device
+ *
+ * Initialize the in-memory BBT.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int nanddev_bbt_init(struct nand_device *nand)
+{
+	unsigned int bits_per_block = fls(NAND_BBT_BLOCK_NUM_STATUS);
+	unsigned int nblocks = nanddev_neraseblocks(nand);
+	unsigned int nwords = DIV_ROUND_UP(nblocks * bits_per_block,
+					   BITS_PER_LONG);
+
+	nand->bbt.cache = kzalloc(nwords, GFP_KERNEL);
+	if (!nand->bbt.cache)
+		return -ENOMEM;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nanddev_bbt_init);
+
+/**
+ * nanddev_bbt_cleanup() - Cleanup the BBT (Bad Block Table)
+ * @nand: NAND device
+ *
+ * Undoes what has been done in nanddev_bbt_init()
+ */
+void nanddev_bbt_cleanup(struct nand_device *nand)
+{
+	kfree(nand->bbt.cache);
+}
+EXPORT_SYMBOL_GPL(nanddev_bbt_cleanup);
+
+/**
+ * nanddev_bbt_update() - Update a BBT
+ * @nand: nand device
+ *
+ * Update the BBT. Currently a NOP function since on-flash bbt is not yet
+ * supported.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int nanddev_bbt_update(struct nand_device *nand)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nanddev_bbt_update);
+
+/**
+ * nanddev_bbt_get_block_status() - Return the status of an eraseblock
+ * @nand: nand device
+ * @entry: the BBT entry
+ *
+ * Return: a positive number nand_bbt_block_status status or -%ERANGE if @entry
+ *	   is bigger than the BBT size.
+ */
+int nanddev_bbt_get_block_status(const struct nand_device *nand,
+				 unsigned int entry)
+{
+	unsigned int bits_per_block = fls(NAND_BBT_BLOCK_NUM_STATUS);
+	unsigned long *pos = nand->bbt.cache +
+			     ((entry * bits_per_block) / BITS_PER_LONG);
+	unsigned int offs = (entry * bits_per_block) % BITS_PER_LONG;
+	unsigned long status;
+
+	if (entry >= nanddev_neraseblocks(nand))
+		return -ERANGE;
+
+	status = pos[0] >> offs;
+	if (bits_per_block + offs > BITS_PER_LONG)
+		status |= pos[1] << (BITS_PER_LONG - offs);
+
+	return status & GENMASK(bits_per_block - 1, 0);
+}
+EXPORT_SYMBOL_GPL(nanddev_bbt_get_block_status);
+
+/**
+ * nanddev_bbt_set_block_status() - Update the status of an eraseblock in the
+ *				    in-memory BBT
+ * @nand: nand device
+ * @entry: the BBT entry to update
+ * @status: the new status
+ *
+ * Update an entry of the in-memory BBT. If you want to push the updated BBT
+ * the NAND you should call nanddev_bbt_update().
+ *
+ * Return: 0 in case of success or -%ERANGE if @entry is bigger than the BBT
+ *	   size.
+ */
+int nanddev_bbt_set_block_status(struct nand_device *nand, unsigned int entry,
+				 enum nand_bbt_block_status status)
+{
+	unsigned int bits_per_block = fls(NAND_BBT_BLOCK_NUM_STATUS);
+	unsigned long *pos = nand->bbt.cache +
+			     ((entry * bits_per_block) / BITS_PER_LONG);
+	unsigned int offs = (entry * bits_per_block) % BITS_PER_LONG;
+	unsigned long val = status & GENMASK(bits_per_block - 1, 0);
+
+	if (entry >= nanddev_neraseblocks(nand))
+		return -ERANGE;
+
+	pos[0] &= ~GENMASK(offs + bits_per_block - 1, offs);
+	pos[0] |= val << offs;
+
+	if (bits_per_block + offs > BITS_PER_LONG) {
+		unsigned int rbits = bits_per_block + offs - BITS_PER_LONG;
+
+		pos[1] &= ~GENMASK(rbits - 1, 0);
+		pos[1] |= val >> rbits;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nanddev_bbt_set_block_status);

drivers/mtd/nand/core.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017 Free Electrons
+ *
+ * Authors:
+ *	Boris Brezillon <boris.brezillon@free-electrons.com>
+ *	Peter Pan <peterpandong@micron.com>
+ */
+
+#define pr_fmt(fmt)	"nand: " fmt
+
+#include <linux/module.h>
+#include <linux/mtd/nand.h>
+
+/**
+ * nanddev_isbad() - Check if a block is bad
+ * @nand: NAND device
+ * @pos: position pointing to the block we want to check
+ *
+ * Return: true if the block is bad, false otherwise.
+ */
+bool nanddev_isbad(struct nand_device *nand, const struct nand_pos *pos)
+{
+	if (nanddev_bbt_is_initialized(nand)) {
+		unsigned int entry;
+		int status;
+
+		entry = nanddev_bbt_pos_to_entry(nand, pos);
+		status = nanddev_bbt_get_block_status(nand, entry);
+		/* Lazy block status retrieval */
+		if (status == NAND_BBT_BLOCK_STATUS_UNKNOWN) {
+			if (nand->ops->isbad(nand, pos))
+				status = NAND_BBT_BLOCK_FACTORY_BAD;
+			else
+				status = NAND_BBT_BLOCK_GOOD;
+
+			nanddev_bbt_set_block_status(nand, entry, status);
+		}
+
+		if (status == NAND_BBT_BLOCK_WORN ||
+		    status == NAND_BBT_BLOCK_FACTORY_BAD)
+			return true;
+
+		return false;
+	}
+
+	return nand->ops->isbad(nand, pos);
+}
+EXPORT_SYMBOL_GPL(nanddev_isbad);
+
+/**
+ * nanddev_markbad() - Mark a block as bad
+ * @nand: NAND device
+ * @pos: position of the block to mark bad
+ *
+ * Mark a block bad. This function is updating the BBT if available and
+ * calls the low-level markbad hook (nand->ops->markbad()).
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int nanddev_markbad(struct nand_device *nand, const struct nand_pos *pos)
+{
+	struct mtd_info *mtd = nanddev_to_mtd(nand);
+	unsigned int entry;
+	int ret = 0;
+
+	if (nanddev_isbad(nand, pos))
+		return 0;
+
+	ret = nand->ops->markbad(nand, pos);
+	if (ret)
+		pr_warn("failed to write BBM to block @%llx (err = %d)\n",
+			nanddev_pos_to_offs(nand, pos), ret);
+
+	if (!nanddev_bbt_is_initialized(nand))
+		goto out;
+
+	entry = nanddev_bbt_pos_to_entry(nand, pos);
+	ret = nanddev_bbt_set_block_status(nand, entry, NAND_BBT_BLOCK_WORN);
+	if (ret)
+		goto out;
+
+	ret = nanddev_bbt_update(nand);
+
+out:
+	if (!ret)
+		mtd->ecc_stats.badblocks++;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(nanddev_markbad);
+
+/**
+ * nanddev_isreserved() - Check whether an eraseblock is reserved or not
+ * @nand: NAND device
+ * @pos: NAND position to test
+ *
+ * Checks whether the eraseblock pointed by @pos is reserved or not.
+ *
+ * Return: true if the eraseblock is reserved, false otherwise.
+ */
+bool nanddev_isreserved(struct nand_device *nand, const struct nand_pos *pos)
+{
+	unsigned int entry;
+	int status;
+
+	if (!nanddev_bbt_is_initialized(nand))
+		return false;
+
+	/* Return info from the table */
+	entry = nanddev_bbt_pos_to_entry(nand, pos);
+	status = nanddev_bbt_get_block_status(nand, entry);
+	return status == NAND_BBT_BLOCK_RESERVED;
+}
+EXPORT_SYMBOL_GPL(nanddev_isreserved);
+
+/**
+ * nanddev_erase() - Erase a NAND portion
+ * @nand: NAND device
+ * @pos: position of the block to erase
+ *
+ * Erases the block if it's not bad.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int nanddev_erase(struct nand_device *nand, const struct nand_pos *pos)
+{
+	if (nanddev_isbad(nand, pos) || nanddev_isreserved(nand, pos)) {
+		pr_warn("attempt to erase a bad/reserved block @%llx\n",
+			nanddev_pos_to_offs(nand, pos));
+		return -EIO;
+	}
+
+	return nand->ops->erase(nand, pos);
+}
+EXPORT_SYMBOL_GPL(nanddev_erase);
+
+/**
+ * nanddev_mtd_erase() - Generic mtd->_erase() implementation for NAND devices
+ * @mtd: MTD device
+ * @einfo: erase request
+ *
+ * This is a simple mtd->_erase() implementation iterating over all blocks
+ * concerned by @einfo and calling nand->ops->erase() on each of them.
+ *
+ * Note that mtd->_erase should not be directly assigned to this helper,
+ * because there's no locking here. NAND specialized layers should instead
+ * implement there own wrapper around nanddev_mtd_erase() taking the
+ * appropriate lock before calling nanddev_mtd_erase().
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo)
+{
+	struct nand_device *nand = mtd_to_nanddev(mtd);
+	struct nand_pos pos, last;
+	int ret;
+
+	nanddev_offs_to_pos(nand, einfo->addr, &pos);
+	nanddev_offs_to_pos(nand, einfo->addr + einfo->len - 1, &last);
+	while (nanddev_pos_cmp(&pos, &last) <= 0) {
+		ret = nanddev_erase(nand, &pos);
+		if (ret) {
+			einfo->fail_addr = nanddev_pos_to_offs(nand, &pos);
+			einfo->state = MTD_ERASE_FAILED;
+
+			return ret;
+		}
+
+		nanddev_pos_next_eraseblock(nand, &pos);
+	}
+
+	einfo->state = MTD_ERASE_DONE;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nanddev_mtd_erase);
+
+/**
+ * nanddev_init() - Initialize a NAND device
+ * @nand: NAND device
+ * @ops: NAND device operations
+ * @owner: NAND device owner
+ *
+ * Initializes a NAND device object. Consistency checks are done on @ops and
+ * @nand->memorg. Also takes care of initializing the BBT.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int nanddev_init(struct nand_device *nand, const struct nand_ops *ops,
+		 struct module *owner)
+{
+	struct mtd_info *mtd = nanddev_to_mtd(nand);
+	struct nand_memory_organization *memorg = nanddev_get_memorg(nand);
+
+	if (!nand || !ops)
+		return -EINVAL;
+
+	if (!ops->erase || !ops->markbad || !ops->isbad)
+		return -EINVAL;
+
+	if (!memorg->bits_per_cell || !memorg->pagesize ||
+	    !memorg->pages_per_eraseblock || !memorg->eraseblocks_per_lun ||
+	    !memorg->planes_per_lun || !memorg->luns_per_target ||
+	    !memorg->ntargets)
+		return -EINVAL;
+
+	nand->rowconv.eraseblock_addr_shift =
+					fls(memorg->pages_per_eraseblock - 1);
+	nand->rowconv.lun_addr_shift = fls(memorg->eraseblocks_per_lun - 1) +
+				       nand->rowconv.eraseblock_addr_shift;
+
+	nand->ops = ops;
+
+	mtd->type = memorg->bits_per_cell == 1 ?
+		    MTD_NANDFLASH : MTD_MLCNANDFLASH;
+	mtd->flags = MTD_CAP_NANDFLASH;
+	mtd->erasesize = memorg->pagesize * memorg->pages_per_eraseblock;
+	mtd->writesize = memorg->pagesize;
+	mtd->writebufsize = memorg->pagesize;
+	mtd->oobsize = memorg->oobsize;
+	mtd->size = nanddev_size(nand);
+	mtd->owner = owner;
+
+	return nanddev_bbt_init(nand);
+}
+EXPORT_SYMBOL_GPL(nanddev_init);
+
+/**
+ * nanddev_cleanup() - Release resources allocated in nanddev_init()
+ * @nand: NAND device
+ *
+ * Basically undoes what has been done in nanddev_init().
+ */
+void nanddev_cleanup(struct nand_device *nand)
+{
+	if (nanddev_bbt_is_initialized(nand))
+		nanddev_bbt_cleanup(nand);
+}
+EXPORT_SYMBOL_GPL(nanddev_cleanup);
+
+MODULE_DESCRIPTION("Generic NAND framework");
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>");
+MODULE_LICENSE("GPL v2");

drivers/mtd/onenand/generic.c → drivers/mtd/nand/onenand/generic.c

 /*
- *  linux/drivers/mtd/onenand/generic.c
- *
  *  Copyright (c) 2005 Samsung Electronics
  *  Kyungmin Park <kyungmin.park@samsung.com>
  *

drivers/mtd/onenand/omap2.c → drivers/mtd/nand/onenand/omap2.c

 /*
- *  linux/drivers/mtd/onenand/omap2.c
- *
  *  OneNAND driver for OMAP2 / OMAP3
  *
  *  Copyright © 2005-2006 Nokia Corporation

drivers/mtd/onenand/onenand_base.c → drivers/mtd/nand/onenand/onenand_base.c

 /*
- *  linux/drivers/mtd/onenand/onenand_base.c
- *
  *  Copyright © 2005-2009 Samsung Electronics
  *  Copyright © 2007 Nokia Corporation
  *

drivers/mtd/onenand/onenand_bbt.c → drivers/mtd/nand/onenand/onenand_bbt.c

 // SPDX-License-Identifier: GPL-2.0
 /*
- *  linux/drivers/mtd/onenand/onenand_bbt.c
- *
  *  Bad Block Table support for the OneNAND driver
  *
  *  Copyright(c) 2005 Samsung Electronics

drivers/mtd/nand/raw/Makefile

+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_MTD_NAND)			+= nand.o
+obj-$(CONFIG_MTD_NAND_ECC)		+= nand_ecc.o
+obj-$(CONFIG_MTD_NAND_BCH)		+= nand_bch.o
+obj-$(CONFIG_MTD_SM_COMMON) 		+= sm_common.o
+
+obj-$(CONFIG_MTD_NAND_CAFE)		+= cafe_nand.o
+obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o
+obj-$(CONFIG_MTD_NAND_DENALI)		+= denali.o
+obj-$(CONFIG_MTD_NAND_DENALI_PCI)	+= denali_pci.o
+obj-$(CONFIG_MTD_NAND_DENALI_DT)	+= denali_dt.o
+obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
+obj-$(CONFIG_MTD_NAND_S3C2410)		+= s3c2410.o
+obj-$(CONFIG_MTD_NAND_TANGO)		+= tango_nand.o
+obj-$(CONFIG_MTD_NAND_DAVINCI)		+= davinci_nand.o
+obj-$(CONFIG_MTD_NAND_DISKONCHIP)	+= diskonchip.o
+obj-$(CONFIG_MTD_NAND_DOCG4)		+= docg4.o
+obj-$(CONFIG_MTD_NAND_FSMC)		+= fsmc_nand.o
+obj-$(CONFIG_MTD_NAND_SHARPSL)		+= sharpsl.o
+obj-$(CONFIG_MTD_NAND_NANDSIM)		+= nandsim.o
+obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
+obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
+obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel/
+obj-$(CONFIG_MTD_NAND_GPIO)		+= gpio.o
+omap2_nand-objs := omap2.o
+obj-$(CONFIG_MTD_NAND_OMAP2) 		+= omap2_nand.o
+obj-$(CONFIG_MTD_NAND_OMAP_BCH_BUILD)	+= omap_elm.o
+obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
+obj-$(CONFIG_MTD_NAND_MARVELL)		+= marvell_nand.o
+obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
+obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
+obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
+obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
+obj-$(CONFIG_MTD_NAND_OXNAS)		+= oxnas_nand.o
+obj-$(CONFIG_MTD_NAND_FSL_ELBC)		+= fsl_elbc_nand.o
+obj-$(CONFIG_MTD_NAND_FSL_IFC)		+= fsl_ifc_nand.o
+obj-$(CONFIG_MTD_NAND_FSL_UPM)		+= fsl_upm.o
+obj-$(CONFIG_MTD_NAND_SLC_LPC32XX)      += lpc32xx_slc.o
+obj-$(CONFIG_MTD_NAND_MLC_LPC32XX)      += lpc32xx_mlc.o
+obj-$(CONFIG_MTD_NAND_SH_FLCTL)		+= sh_flctl.o
+obj-$(CONFIG_MTD_NAND_MXC)		+= mxc_nand.o
+obj-$(CONFIG_MTD_NAND_SOCRATES)		+= socrates_nand.o
+obj-$(CONFIG_MTD_NAND_TXX9NDFMC)	+= txx9ndfmc.o
+obj-$(CONFIG_MTD_NAND_NUC900)		+= nuc900_nand.o
+obj-$(CONFIG_MTD_NAND_MPC5121_NFC)	+= mpc5121_nfc.o
+obj-$(CONFIG_MTD_NAND_VF610_NFC)	+= vf610_nfc.o
+obj-$(CONFIG_MTD_NAND_RICOH)		+= r852.o
+obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740_nand.o
+obj-$(CONFIG_MTD_NAND_JZ4780)		+= jz4780_nand.o jz4780_bch.o
+obj-$(CONFIG_MTD_NAND_GPMI_NAND)	+= gpmi-nand/
+obj-$(CONFIG_MTD_NAND_XWAY)		+= xway_nand.o
+obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH)	+= bcm47xxnflash/
+obj-$(CONFIG_MTD_NAND_SUNXI)		+= sunxi_nand.o
+obj-$(CONFIG_MTD_NAND_HISI504)	        += hisi504_nand.o
+obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmnand/
+obj-$(CONFIG_MTD_NAND_QCOM)		+= qcom_nandc.o
+obj-$(CONFIG_MTD_NAND_MTK)		+= mtk_ecc.o mtk_nand.o
+
+nand-objs := nand_base.o nand_bbt.o nand_timings.o nand_ids.o
+nand-objs += nand_amd.o
+nand-objs += nand_hynix.o
+nand-objs += nand_macronix.o
+nand-objs += nand_micron.o
+nand-objs += nand_samsung.o
+nand-objs += nand_toshiba.o

drivers/mtd/nand/ams-delta.c → drivers/mtd/nand/raw/ams-delta.c

 /*
- *  drivers/mtd/nand/ams-delta.c
- *
  *  Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
  *
- *  Derived from drivers/mtd/toto.c
+ *  Derived from drivers/mtd/nand/toto.c (removed in v2.6.28)
+ *    Copyright (c) 2003 Texas Instruments
+ *    Copyright (c) 2002 Thomas Gleixner <tgxl@linutronix.de>
+ *
  *  Converted to platform driver by Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
- *  Partially stolen from drivers/mtd/nand/plat_nand.c
+ *  Partially stolen from plat_nand.c
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -185,7 +186,7 @@ static int ams_delta_init(struct platform_device *pdev)
 	/* Allocate memory for MTD device structure and private data */
 	this = kzalloc(sizeof(struct nand_chip), GFP_KERNEL);
 	if (!this) {
-		printk (KERN_WARNING "Unable to allocate E3 NAND MTD device structure.\n");
+		pr_warn("Unable to allocate E3 NAND MTD device structure.\n");
 		err = -ENOMEM;
 		goto out;
 	}
@@ -219,7 +220,7 @@ static int ams_delta_init(struct platform_device *pdev)
 		this->dev_ready = ams_delta_nand_ready;
 	} else {
 		this->dev_ready = NULL;
-		printk(KERN_NOTICE "Couldn't request gpio for Delta NAND ready.\n");
+		pr_notice("Couldn't request gpio for Delta NAND ready.\n");
 	}
 	/* 25 us command delay time */
 	this->chip_delay = 30;

drivers/mtd/nand/atmel/nand-controller.c → drivers/mtd/nand/raw/atmel/nand-controller.c

@@ -9,10 +9,10 @@
  *
  *   Copyright 2003 Rick Bronson
  *
- *   Derived from drivers/mtd/nand/autcpu12.c
+ *   Derived from drivers/mtd/nand/autcpu12.c (removed in v3.8)
  *	Copyright 2001 Thomas Gleixner (gleixner@autronix.de)
  *
- *   Derived from drivers/mtd/spia.c
+ *   Derived from drivers/mtd/spia.c (removed in v3.8)
  *	Copyright 2000 Steven J. Hill (sjhill@cotw.com)
  *
  *

drivers/mtd/nand/atmel/pmecc.c → drivers/mtd/nand/raw/atmel/pmecc.c

@@ -9,10 +9,10 @@
  *
  *   Copyright 2003 Rick Bronson
  *
- *   Derived from drivers/mtd/nand/autcpu12.c
+ *   Derived from drivers/mtd/nand/autcpu12.c (removed in v3.8)
  *	Copyright 2001 Thomas Gleixner (gleixner@autronix.de)
  *
- *   Derived from drivers/mtd/spia.c
+ *   Derived from drivers/mtd/spia.c (removed in v3.8)
  *	Copyright 2000 Steven J. Hill (sjhill@cotw.com)
  *
  *   Add Hardware ECC support for AT91SAM9260 / AT91SAM9263

drivers/mtd/nand/atmel/pmecc.h → drivers/mtd/nand/raw/atmel/pmecc.h

@@ -9,10 +9,10 @@
  *
  *    Copyright © 2003 Rick Bronson
  *
- *    Derived from drivers/mtd/nand/autcpu12.c
+ *    Derived from drivers/mtd/nand/autcpu12.c (removed in v3.8)
  *        Copyright © 2001 Thomas Gleixner (gleixner@autronix.de)
  *
- *    Derived from drivers/mtd/spia.c
+ *    Derived from drivers/mtd/spia.c (removed in v3.8)
  *        Copyright © 2000 Steven J. Hill (sjhill@cotw.com)
  *
  *

drivers/mtd/nand/au1550nd.c → drivers/mtd/nand/raw/au1550nd.c

 /*
- *  drivers/mtd/nand/au1550nd.c
- *
  *  Copyright (C) 2004 Embedded Edge, LLC
  *
  * This program is free software; you can redistribute it and/or modify

drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c → drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c

@@ -392,8 +392,8 @@ int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n)
 	b47n->nand_chip.read_byte = bcm47xxnflash_ops_bcm4706_read_byte;
 	b47n->nand_chip.read_buf = bcm47xxnflash_ops_bcm4706_read_buf;
 	b47n->nand_chip.write_buf = bcm47xxnflash_ops_bcm4706_write_buf;
-	b47n->nand_chip.onfi_set_features = nand_onfi_get_set_features_notsupp;
-	b47n->nand_chip.onfi_get_features = nand_onfi_get_set_features_notsupp;
+	b47n->nand_chip.set_features = nand_get_set_features_notsupp;
+	b47n->nand_chip.get_features = nand_get_set_features_notsupp;
 
 	nand_chip->chip_delay = 50;
 	b47n->nand_chip.bbt_options = NAND_BBT_USE_FLASH;

drivers/mtd/nand/brcmnand/brcmnand.c → drivers/mtd/nand/raw/brcmnand/brcmnand.c

@@ -2297,7 +2297,11 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn)
 	if (ret)
 		return ret;
 
-	return mtd_device_register(mtd, NULL, 0);
+	ret = mtd_device_register(mtd, NULL, 0);
+	if (ret)
+		nand_cleanup(chip);
+
+	return ret;
 }
 
 static void brcmnand_save_restore_cs_config(struct brcmnand_host *host,

drivers/mtd/nand/cafe_nand.c → drivers/mtd/nand/raw/cafe_nand.c

@@ -645,8 +645,8 @@ static int cafe_nand_probe(struct pci_dev *pdev,
 	cafe->nand.read_buf = cafe_read_buf;
 	cafe->nand.write_buf = cafe_write_buf;
 	cafe->nand.select_chip = cafe_select_chip;
-	cafe->nand.onfi_set_features = nand_onfi_get_set_features_notsupp;
-	cafe->nand.onfi_get_features = nand_onfi_get_set_features_notsupp;
+	cafe->nand.set_features = nand_get_set_features_notsupp;
+	cafe->nand.get_features = nand_get_set_features_notsupp;
 
 	cafe->nand.chip_delay = 0;
 
@@ -751,7 +751,7 @@ static int cafe_nand_probe(struct pci_dev *pdev,
 		cafe->nand.bbt_td = &cafe_bbt_main_descr_512;
 		cafe->nand.bbt_md = &cafe_bbt_mirror_descr_512;
 	} else {
-		printk(KERN_WARNING "Unexpected NAND flash writesize %d. Aborting\n",
+		pr_warn("Unexpected NAND flash writesize %d. Aborting\n",
 			mtd->writesize);
 		goto out_free_dma;
 	}
@@ -774,10 +774,14 @@ static int cafe_nand_probe(struct pci_dev *pdev,
 	pci_set_drvdata(pdev, mtd);
 
 	mtd->name = "cafe_nand";
-	mtd_device_parse_register(mtd, part_probes, NULL, NULL, 0);
+	err = mtd_device_parse_register(mtd, part_probes, NULL, NULL, 0);
+	if (err)
+		goto out_cleanup_nand;
 
 	goto out;
 
+ out_cleanup_nand:
+	nand_cleanup(&cafe->nand);
  out_free_dma:
 	dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
  out_irq:

drivers/mtd/nand/cmx270_nand.c → drivers/mtd/nand/raw/cmx270_nand.c

 /*
- *  linux/drivers/mtd/nand/cmx270-nand.c
- *
  *  Copyright (C) 2006 Compulab, Ltd.
  *  Mike Rapoport <mike@compulab.co.il>
  *
- *  Derived from drivers/mtd/nand/h1910.c
+ *  Derived from drivers/mtd/nand/h1910.c (removed in v3.10)
  *       Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
  *       Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
  *

drivers/mtd/nand/cs553x_nand.c → drivers/mtd/nand/raw/cs553x_nand.c

 /*
- * drivers/mtd/nand/cs553x_nand.c
- *
  * (C) 2005, 2006 Red Hat Inc.
  *
  * Author: David Woodhouse <dwmw2@infradead.org>
@@ -189,10 +187,11 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
 	struct nand_chip *this;
 	struct mtd_info *new_mtd;
 
-	printk(KERN_NOTICE "Probing CS553x NAND controller CS#%d at %sIO 0x%08lx\n", cs, mmio?"MM":"P", adr);
+	pr_notice("Probing CS553x NAND controller CS#%d at %sIO 0x%08lx\n",
+		  cs, mmio ? "MM" : "P", adr);
 
 	if (!mmio) {
-		printk(KERN_NOTICE "PIO mode not yet implemented for CS553X NAND controller\n");
+		pr_notice("PIO mode not yet implemented for CS553X NAND controller\n");
 		return -ENXIO;
 	}
 
@@ -211,7 +210,7 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
 	/* map physical address */
 	this->IO_ADDR_R = this->IO_ADDR_W = ioremap(adr, 4096);
 	if (!this->IO_ADDR_R) {
-		printk(KERN_WARNING "ioremap cs553x NAND @0x%08lx failed\n", adr);
+		pr_warn("ioremap cs553x NAND @0x%08lx failed\n", adr);
 		err = -EIO;
 		goto out_mtd;
 	}
@@ -295,7 +294,7 @@ static int __init cs553x_init(void)
 	/* If it doesn't have the NAND controller enabled, abort */
 	rdmsrl(MSR_DIVIL_BALL_OPTS, val);
 	if (val & PIN_OPT_IDE) {
-		printk(KERN_INFO "CS553x NAND controller: Flash I/O not enabled in MSR_DIVIL_BALL_OPTS.\n");
+		pr_info("CS553x NAND controller: Flash I/O not enabled in MSR_DIVIL_BALL_OPTS.\n");
 		return -ENXIO;
 	}
 

drivers/mtd/nand/davinci_nand.c → drivers/mtd/nand/raw/davinci_nand.c

@@ -826,7 +826,7 @@ static int nand_davinci_probe(struct platform_device *pdev)
 	else
 		ret = mtd_device_register(mtd, NULL, 0);
 	if (ret < 0)
-		goto err;
+		goto err_cleanup_nand;
 
 	val = davinci_nand_readl(info, NRCSR_OFFSET);
 	dev_info(&pdev->dev, "controller rev. %d.%d\n",
@@ -834,6 +834,9 @@ static int nand_davinci_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_cleanup_nand:
+	nand_cleanup(&info->chip);
+
 err:
 	clk_disable_unprepare(info->clk);
 

drivers/mtd/nand/denali.c → drivers/mtd/nand/raw/denali.c

@@ -1384,10 +1384,12 @@ int denali_init(struct denali_nand_info *denali)
 	ret = mtd_device_register(mtd, NULL, 0);
 	if (ret) {
 		dev_err(denali->dev, "Failed to register MTD: %d\n", ret);
-		goto free_buf;
+		goto cleanup_nand;
 	}
 	return 0;
 
+cleanup_nand:
+	nand_cleanup(chip);
 free_buf:
 	kfree(denali->buf);
 disable_irq:

drivers/mtd/nand/docg4.c → drivers/mtd/nand/raw/docg4.c

@@ -1269,8 +1269,8 @@ static void __init init_mtd_structs(struct mtd_info *mtd)
 	nand->read_buf = docg4_read_buf;
 	nand->write_buf = docg4_write_buf16;
 	nand->erase = docg4_erase_block;
-	nand->onfi_set_features = nand_onfi_get_set_features_notsupp;
-	nand->onfi_get_features = nand_onfi_get_set_features_notsupp;
+	nand->set_features = nand_get_set_features_notsupp;
+	nand->get_features = nand_get_set_features_notsupp;
 	nand->ecc.read_page = docg4_read_page;
 	nand->ecc.write_page = docg4_write_page;
 	nand->ecc.read_page_raw = docg4_read_page_raw;

drivers/mtd/nand/fsl_elbc_nand.c → drivers/mtd/nand/raw/fsl_elbc_nand.c

@@ -775,8 +775,8 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 	chip->select_chip = fsl_elbc_select_chip;
 	chip->cmdfunc = fsl_elbc_cmdfunc;
 	chip->waitfunc = fsl_elbc_wait;
-	chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
-	chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
+	chip->set_features = nand_get_set_features_notsupp;
+	chip->get_features = nand_get_set_features_notsupp;
 
 	chip->bbt_td = &bbt_main_descr;
 	chip->bbt_md = &bbt_mirror_descr;
@@ -929,7 +929,7 @@ static int fsl_elbc_nand_probe(struct platform_device *pdev)
 	mtd_device_parse_register(mtd, part_probe_types, NULL,
 				  NULL, 0);
 
-	printk(KERN_INFO "eLBC NAND device at 0x%llx, bank %d\n",
+	pr_info("eLBC NAND device at 0x%llx, bank %d\n",
 		(unsigned long long)res.start, priv->bank);
 	return 0;
 

drivers/mtd/nand/fsl_ifc_nand.c → drivers/mtd/nand/raw/fsl_ifc_nand.c

@@ -805,7 +805,7 @@ static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv)
 			   msecs_to_jiffies(IFC_TIMEOUT_MSECS));
 
 	if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC)
-		printk(KERN_ERR "fsl-ifc: Failed to Initialise SRAM\n");
+		pr_err("fsl-ifc: Failed to Initialise SRAM\n");
 
 	/* Restore CSOR and CSOR_ext */
 	ifc_out32(csor, &ifc_global->csor_cs[cs].csor);
@@ -838,8 +838,8 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 	chip->select_chip = fsl_ifc_select_chip;
 	chip->cmdfunc = fsl_ifc_cmdfunc;
 	chip->waitfunc = fsl_ifc_wait;
-	chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
-	chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
+	chip->set_features = nand_get_set_features_notsupp;
+	chip->get_features = nand_get_set_features_notsupp;
 
 	chip->bbt_td = &bbt_main_descr;
 	chip->bbt_md = &bbt_mirror_descr;

drivers/mtd/nand/gpio.c → drivers/mtd/nand/raw/gpio.c

 /*
- * drivers/mtd/nand/gpio.c
- *
  * Updated, and converted to generic GPIO based driver by Russell King.
  *
  * Written by Ben Dooks <ben@simtec.co.uk>

drivers/mtd/nand/gpmi-nand/gpmi-regs.h → drivers/mtd/nand/raw/gpmi-nand/gpmi-regs.h

@@ -147,6 +147,11 @@
 
 #define BM_GPMI_CTRL1_GPMI_MODE				(1 << 0)
 
+#define BM_GPMI_CTRL1_CLEAR_MASK (BM_GPMI_CTRL1_WRN_DLY_SEL | \
+				  BM_GPMI_CTRL1_DLL_ENABLE |  \
+				  BM_GPMI_CTRL1_RDN_DELAY |   \
+				  BM_GPMI_CTRL1_HALF_PERIOD)
+
 #define HW_GPMI_TIMING0					0x00000070
 
 #define BP_GPMI_TIMING0_ADDRESS_SETUP			16

drivers/mtd/nand/hisi504_nand.c → drivers/mtd/nand/raw/hisi504_nand.c

@@ -762,8 +762,8 @@ static int hisi_nfc_probe(struct platform_device *pdev)
 	chip->write_buf		= hisi_nfc_write_buf;
 	chip->read_buf		= hisi_nfc_read_buf;
 	chip->chip_delay	= HINFC504_CHIP_DELAY;
-	chip->onfi_set_features	= nand_onfi_get_set_features_notsupp;
-	chip->onfi_get_features	= nand_onfi_get_set_features_notsupp;
+	chip->set_features	= nand_get_set_features_notsupp;
+	chip->get_features	= nand_get_set_features_notsupp;
 
 	hisi_nfc_host_init(host);
 

drivers/mtd/nand/mpc5121_nfc.c → drivers/mtd/nand/raw/mpc5121_nfc.c

@@ -6,9 +6,8 @@
  * by OSADL membership fees in 2009;  for details see www.osadl.org.
  *
  * Based on original driver from Freescale Semiconductor
- * written by John Rigby <jrigby@freescale.com> on basis
- * of drivers/mtd/nand/mxc_nand.c. Reworked and extended
- * Piotr Ziecik <kosmo@semihalf.com>.
+ * written by John Rigby <jrigby@freescale.com> on basis of mxc_nand.c.
+ * Reworked and extended by Piotr Ziecik <kosmo@semihalf.com>.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -708,8 +707,8 @@ static int mpc5121_nfc_probe(struct platform_device *op)
 	chip->read_buf = mpc5121_nfc_read_buf;
 	chip->write_buf = mpc5121_nfc_write_buf;
 	chip->select_chip = mpc5121_nfc_select_chip;
-	chip->onfi_set_features	= nand_onfi_get_set_features_notsupp;
-	chip->onfi_get_features	= nand_onfi_get_set_features_notsupp;
+	chip->set_features	= nand_get_set_features_notsupp;
+	chip->get_features	= nand_get_set_features_notsupp;
 	chip->bbt_options = NAND_BBT_USE_FLASH;
 	chip->ecc.mode = NAND_ECC_SOFT;
 	chip->ecc.algo = NAND_ECC_HAMMING;

drivers/mtd/nand/nand_bch.c → drivers/mtd/nand/raw/nand_bch.c

@@ -95,7 +95,7 @@ int nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
 					errloc[i]);
 		}
 	} else if (count < 0) {
-		printk(KERN_ERR "ecc unrecoverable error\n");
+		pr_err("ecc unrecoverable error\n");
 		count = -EBADMSG;
 	}
 	return count;
@@ -134,7 +134,7 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
 	}
 
 	if (!eccsize || !eccbytes) {
-		printk(KERN_WARNING "ecc parameters not supplied\n");
+		pr_warn("ecc parameters not supplied\n");
 		goto fail;
 	}
 
@@ -151,7 +151,7 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
 
 	/* verify that eccbytes has the expected value */
 	if (nbc->bch->ecc_bytes != eccbytes) {
-		printk(KERN_WARNING "invalid eccbytes %u, should be %u\n",
+		pr_warn("invalid eccbytes %u, should be %u\n",
 			eccbytes, nbc->bch->ecc_bytes);
 		goto fail;
 	}
@@ -166,7 +166,7 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
 
 	/* sanity checks */
 	if (8*(eccsize+eccbytes) >= (1 << m)) {
-		printk(KERN_WARNING "eccsize %u is too large\n", eccsize);
+		pr_warn("eccsize %u is too large\n", eccsize);
 		goto fail;
 	}
 
@@ -181,7 +181,7 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
 	nand->ecc.steps = eccsteps;
 	nand->ecc.total = eccsteps * eccbytes;
 	if (mtd_ooblayout_count_eccbytes(mtd) != (eccsteps*eccbytes)) {
-		printk(KERN_WARNING "invalid ecc layout\n");
+		pr_warn("invalid ecc layout\n");
 		goto fail;
 	}