[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

This just leaves include/asm-arm/plat-* to deal with.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Documentation/arm/IXP4xx

@@ -32,7 +32,7 @@ Linux currently supports the following features on the IXP4xx chips:
 - Flash access (MTD/JFFS)
 - I2C through GPIO on IXP42x
 - GPIO for input/output/interrupts 
-  See include/asm-arm/arch-ixp4xx/platform.h for access functions.
+  See arch/arm/mach-ixp4xx/include/mach/platform.h for access functions.
 - Timers (watchdog, OS)
 
 The following components of the chips are not supported by Linux and

Documentation/arm/Interrupts

@@ -158,7 +158,7 @@ So, what's changed?
    be re-checked for pending events.  (see the Neponset IRQ handler for
    details).
 
-7. fixup_irq() is gone, as is include/asm-arm/arch-*/irq.h
+7. fixup_irq() is gone, as is arch/arm/mach-*/include/mach/irq.h
 
 Please note that this will not solve all problems - some of them are
 hardware based.  Mixing level-based and edge-based IRQs on the same

Documentation/arm/README

@@ -79,7 +79,7 @@ Machine/Platform support
   To this end, we now have arch/arm/mach-$(MACHINE) directories which are
   designed to house the non-driver files for a particular machine (eg, PCI,
   memory management, architecture definitions etc).  For all future
-  machines, there should be a corresponding include/asm-arm/arch-$(MACHINE)
+  machines, there should be a corresponding arch/arm/mach-$(MACHINE)/include/mach
   directory.
 
 
@@ -176,7 +176,7 @@ Kernel entry (head.S)
   class typically based around one or more system on a chip devices, and
   acts as a natural container around the actual implementations.  These
   classes are given directories - arch/arm/mach-<class> and
-  include/asm-arm/arch-<class> - which contain the source files to
+  arch/arm/mach-<class> - which contain the source files to/include/mach
   support the machine class.  This directories also contain any machine
   specific supporting code.
 

Documentation/arm/Samsung-S3C24XX/GPIO.txt

@@ -16,13 +16,13 @@ Introduction
 Headers
 -------
 
-  See include/asm-arm/arch-s3c2410/regs-gpio.h for the list
+  See arch/arm/mach-s3c2410/include/mach/regs-gpio.h for the list
   of GPIO pins, and the configuration values for them. This
-  is included by using #include <asm/arch/regs-gpio.h>
+  is included by using #include <mach/regs-gpio.h>
 
   The GPIO management functions are defined in the hardware
-  header include/asm-arm/arch-s3c2410/hardware.h which can be
-  included by #include <asm/arch/hardware.h>
+  header arch/arm/mach-s3c2410/include/mach/hardware.h which can be
+  included by #include <mach/hardware.h>
 
   A useful amount of documentation can be found in the hardware
   header on how the GPIO functions (and others) work.

Documentation/arm/Samsung-S3C24XX/Overview.txt

@@ -36,7 +36,7 @@ Layout
   in arch/arm/mach-s3c2410 and S3C2440 in arch/arm/mach-s3c2440
 
   Register, kernel and platform data definitions are held in the
-  include/asm-arm/arch-s3c2410 directory.
+  arch/arm/mach-s3c2410 directory./include/mach
 
 
 Machines

Documentation/arm/Samsung-S3C24XX/USB-Host.txt

@@ -49,7 +49,7 @@ Board Support
 Platform Data
 -------------
 
-  See linux/include/asm-arm/arch-s3c2410/usb-control.h for the
+  See arch/arm/mach-s3c2410/include/mach/usb-control.h for the
   descriptions of the platform device data. An implementation
   can be found in linux/arch/arm/mach-s3c2410/usb-simtec.c .
 

Documentation/spi/pxa2xx

@@ -19,7 +19,7 @@ Declaring PXA2xx Master Controllers
 -----------------------------------
 Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a
 "platform device".  The master configuration is passed to the driver via a table
-found in include/asm-arm/arch-pxa/pxa2xx_spi.h:
+found in arch/arm/mach-pxa/include/mach/pxa2xx_spi.h:
 
 struct pxa2xx_spi_master {
 	enum pxa_ssp_type ssp_type;
@@ -94,7 +94,7 @@ using the "spi_board_info" structure found in "linux/spi/spi.h". See
 
 Each slave device attached to the PXA must provide slave specific configuration
 information via the structure "pxa2xx_spi_chip" found in
-"include/asm-arm/arch-pxa/pxa2xx_spi.h".  The pxa2xx_spi master controller driver
+"arch/arm/mach-pxa/include/mach/pxa2xx_spi.h".  The pxa2xx_spi master controller driver
 will uses the configuration whenever the driver communicates with the slave
 device.
 

Documentation/spi/spi-summary

@@ -210,7 +210,7 @@ board should normally be set up and registered.
 
 So for example arch/.../mach-*/board-*.c files might have code like:
 
-	#include <asm/arch/spi.h>	/* for mysoc_spi_data */
+	#include <mach/spi.h>	/* for mysoc_spi_data */
 
 	/* if your mach-* infrastructure doesn't support kernels that can
 	 * run on multiple boards, pdata wouldn't benefit from "__init".
@@ -227,7 +227,7 @@ So for example arch/.../mach-*/board-*.c files might have code like:
 
 And SOC-specific utility code might look something like:
 
-	#include <asm/arch/spi.h>
+	#include <mach/spi.h>
 
 	static struct platform_device spi2 = { ... };
 

arch/arm/Makefile

@@ -97,9 +97,7 @@ textofs-y	:= 0x00008000
  machine-$(CONFIG_ARCH_RPC)	   := rpc
  machine-$(CONFIG_ARCH_EBSA110)	   := ebsa110
  machine-$(CONFIG_ARCH_CLPS7500)   := clps7500
-  incdir-$(CONFIG_ARCH_CLPS7500)   := cl7500
  machine-$(CONFIG_FOOTBRIDGE)	   := footbridge
-  incdir-$(CONFIG_FOOTBRIDGE)	   := ebsa285
  machine-$(CONFIG_ARCH_SHARK)	   := shark
  machine-$(CONFIG_ARCH_SA1100)	   := sa1100
 ifeq ($(CONFIG_ARCH_SA1100),y)
@@ -120,7 +118,6 @@ endif
  machine-$(CONFIG_ARCH_IXP23XX)    := ixp23xx
  machine-$(CONFIG_ARCH_OMAP1)	   := omap1
  machine-$(CONFIG_ARCH_OMAP2)	   := omap2
-  incdir-$(CONFIG_ARCH_OMAP)	   := omap
     plat-$(CONFIG_ARCH_OMAP)	   := omap
  machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
     plat-$(CONFIG_PLAT_S3C24XX)	   := s3c24xx
@@ -138,7 +135,6 @@ endif
  machine-$(CONFIG_ARCH_DAVINCI)	   := davinci
  machine-$(CONFIG_ARCH_KIRKWOOD)   := kirkwood
  machine-$(CONFIG_ARCH_KS8695)     := ks8695
-  incdir-$(CONFIG_ARCH_MXC)	   := mxc
     plat-$(CONFIG_ARCH_MXC)	   := mxc
  machine-$(CONFIG_ARCH_MX2)	   := mx2
  machine-$(CONFIG_ARCH_MX3)	   := mx3
@@ -158,11 +154,6 @@ endif
 # The byte offset of the kernel image in RAM from the start of RAM.
 TEXT_OFFSET := $(textofs-y)
 
-ifeq ($(incdir-y),)
-incdir-y := $(word 1,$(machine-y))
-endif
-INCDIR   := arch-$(incdir-y)
-
 # The first directory contains additional information for the boot setup code
 ifneq ($(machine-y),)
 MACHINE  := arch/arm/mach-$(word 1,$(machine-y))/
@@ -213,20 +204,10 @@ boot := arch/arm/boot
 #	them changed.  We use .arch to indicate when they were updated
 #	last, otherwise make uses the target directory mtime.
 
-include/asm-arm/.arch: $(wildcard include/config/arch/*.h) include/config/auto.conf
-	@echo '  SYMLINK include/asm-arm/arch -> include/asm-arm/$(INCDIR)'
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p include/asm-arm
-	$(Q)ln -fsn $(srctree)/include/asm-arm/$(INCDIR) include/asm-arm/arch
-else
-	$(Q)ln -fsn $(INCDIR) include/asm-arm/arch
-endif
-	@touch $@
-
 archprepare: maketools
 
 PHONY += maketools FORCE
-maketools: include/linux/version.h include/asm-arm/.arch FORCE
+maketools: include/linux/version.h FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h
 
 # Convert bzImage to zImage

arch/arm/boot/compressed/head.S

@@ -37,7 +37,7 @@
 
 #else
 
-#include <asm/arch/debug-macro.S>
+#include <mach/debug-macro.S>
 
 		.macro	writeb,	ch, rb
 		senduart \ch, \rb

arch/arm/boot/compressed/misc.c

@@ -27,7 +27,7 @@ unsigned int __machine_arch_type;
 static void putstr(const char *ptr);
 
 #include <linux/compiler.h>
-#include <asm/arch/uncompress.h>
+#include <mach/uncompress.h>
 
 #ifdef CONFIG_DEBUG_ICEDCC
 

arch/arm/common/locomo.c

@@ -25,7 +25,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>

arch/arm/common/sa1111.c

@@ -26,7 +26,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/io.h>
 #include <asm/irq.h>

arch/arm/common/sharpsl_pm.c

@@ -26,12 +26,12 @@
 #include <linux/apm-emulation.h>
 #include <linux/suspend.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/sharpsl.h>
 #include <asm/hardware/sharpsl_pm.h>
 
 /*

arch/arm/common/time-acorn.c

@@ -18,7 +18,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/hardware/ioc.h>
 

arch/arm/common/uengine.c

@@ -16,7 +16,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/string.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/uengine.h>
 #include <asm/io.h>
 

arch/arm/include/asm/dma.h

@@ -6,7 +6,7 @@ typedef unsigned int dmach_t;
 #include <linux/spinlock.h>
 #include <asm/system.h>
 #include <asm/scatterlist.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 /*
  * This is the maximum virtual address which can be DMA'd from.

arch/arm/include/asm/floppy.h

@@ -12,7 +12,7 @@
 #ifndef __ASM_ARM_FLOPPY_H
 #define __ASM_ARM_FLOPPY_H
 #if 0
-#include <asm/arch/floppy.h>
+#include <mach/floppy.h>
 #endif
 
 #define fd_outb(val,port)			\

arch/arm/include/asm/gpio.h

@@ -2,6 +2,6 @@
 #define _ARCH_ARM_GPIO_H
 
 /* not all ARM platforms necessarily support this API ... */
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 #endif /* _ARCH_ARM_GPIO_H */

arch/arm/include/asm/hardware/dec21285.h

@@ -19,7 +19,7 @@
 #define DC21285_PCI_MEM			0x80000000
 
 #ifndef __ASSEMBLY__
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #define DC21285_IO(x)		((volatile unsigned long *)(ARMCSR_BASE+(x)))
 #else
 #define DC21285_IO(x)		(x)

arch/arm/include/asm/hardware/iop3xx-adma.h

@@ -19,7 +19,7 @@
 #define _ADMA_H
 #include <linux/types.h>
 #include <linux/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iop_adma.h>
 
 /* Memory copy units */

arch/arm/include/asm/hardware/iop3xx-gpio.h

@@ -25,7 +25,7 @@
 #ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
 #define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm-generic/gpio.h>
 
 #define IOP3XX_N_GPIOS	8

arch/arm/include/asm/hardware/sa1111.h

@@ -12,7 +12,7 @@
 #ifndef _ASM_ARCH_SA1111
 #define _ASM_ARCH_SA1111
 
-#include <asm/arch/bitfield.h>
+#include <mach/bitfield.h>
 
 /*
  * The SA1111 is always located at virtual 0xf4000000, and is always

arch/arm/include/asm/io.h

@@ -82,7 +82,7 @@ extern void __readwrite_bug(const char *fn);
 /*
  * Now, pick up the machine-defined IO definitions
  */
-#include <asm/arch/io.h>
+#include <mach/io.h>
 
 /*
  *  IO port access primitives

arch/arm/include/asm/irq.h

 #ifndef __ASM_ARM_IRQ_H
 #define __ASM_ARM_IRQ_H
 
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #ifndef irq_canonicalize
 #define irq_canonicalize(i)	(i)

arch/arm/include/asm/mc146818rtc.h

@@ -4,7 +4,7 @@
 #ifndef _ASM_MC146818RTC_H
 #define _ASM_MC146818RTC_H
 
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 #include <asm/io.h>
 
 #ifndef RTC_PORT

arch/arm/include/asm/memory.h

@@ -24,7 +24,7 @@
 #endif
 
 #include <linux/compiler.h>
-#include <asm/arch/memory.h>
+#include <mach/memory.h>
 #include <asm/sizes.h>
 
 #ifdef CONFIG_MMU

arch/arm/include/asm/mmzone.h

@@ -25,6 +25,6 @@ extern pg_data_t discontig_node_data[];
  */
 #define NODE_MEM_MAP(nid)	(NODE_DATA(nid)->node_mem_map)
 
-#include <asm/arch/memory.h>
+#include <mach/memory.h>
 
 #endif

arch/arm/include/asm/mtd-xip.h

@@ -17,8 +17,8 @@
 #ifndef __ARM_MTD_XIP_H__
 #define __ARM_MTD_XIP_H__
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/mtd-xip.h>
+#include <mach/hardware.h>
+#include <mach/mtd-xip.h>
 
 /* fill instruction prefetch */
 #define xip_iprefetch() 	do { asm volatile (".rep 8; nop; .endr"); } while (0)

arch/arm/include/asm/pci.h

@@ -4,7 +4,7 @@
 #ifdef __KERNEL__
 #include <asm-generic/pci-dma-compat.h>
 
-#include <asm/arch/hardware.h> /* for PCIBIOS_MIN_* */
+#include <mach/hardware.h> /* for PCIBIOS_MIN_* */
 
 #define pcibios_scan_all_fns(a, b)	0
 

arch/arm/include/asm/pgtable.h

@@ -20,7 +20,7 @@
 #else
 
 #include <asm/memory.h>
-#include <asm/arch/vmalloc.h>
+#include <mach/vmalloc.h>
 #include <asm/pgtable-hwdef.h>
 
 /*

arch/arm/include/asm/smp.h

@@ -14,7 +14,7 @@
 #include <linux/cpumask.h>
 #include <linux/thread_info.h>
 
-#include <asm/arch/smp.h>
+#include <mach/smp.h>
 
 #ifndef CONFIG_SMP
 # error "<asm/smp.h> included in non-SMP build"

arch/arm/include/asm/timex.h

@@ -12,7 +12,7 @@
 #ifndef _ASMARM_TIMEX_H
 #define _ASMARM_TIMEX_H
 
-#include <asm/arch/timex.h>
+#include <mach/timex.h>
 
 typedef unsigned long cycles_t;
 

arch/arm/include/asm/vga.h

 #ifndef ASMARM_VGA_H
 #define ASMARM_VGA_H
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #define VGA_MAP_MEM(x,s)	(PCIMEM_BASE + (x))

arch/arm/kernel/crunch-bits.S

@@ -16,7 +16,7 @@
 #include <asm/ptrace.h>
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
 
 /*
  * We can't use hex constants here due to a bug in gas.

arch/arm/kernel/crunch.c

@@ -15,7 +15,7 @@
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/init.h>
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
 #include <asm/thread_notify.h>
 #include <asm/io.h>
 

arch/arm/kernel/debug.S

@@ -80,7 +80,7 @@
 #endif	/* CONFIG_CPU_V6 */
 
 #else
-#include <asm/arch/debug-macro.S>
+#include <mach/debug-macro.S>
 #endif	/* CONFIG_DEBUG_ICEDCC */
 
 /*

arch/arm/kernel/ecard.c

@@ -46,7 +46,7 @@
 
 #include <asm/dma.h>
 #include <asm/ecard.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/mach/irq.h>

arch/arm/kernel/entry-armv.S

@@ -18,7 +18,7 @@
 #include <asm/memory.h>
 #include <asm/glue.h>
 #include <asm/vfpmacros.h>
-#include <asm/arch/entry-macro.S>
+#include <mach/entry-macro.S>
 #include <asm/thread_notify.h>
 
 #include "entry-header.S"

arch/arm/kernel/entry-common.S

@@ -10,7 +10,7 @@
 
 #include <asm/unistd.h>
 #include <asm/ftrace.h>
-#include <asm/arch/entry-macro.S>
+#include <mach/entry-macro.S>
 
 #include "entry-header.S"
 

arch/arm/kernel/process.c

@@ -51,7 +51,7 @@ extern void setup_mm_for_reboot(char mode);
 
 static volatile int hlt_counter;
 
-#include <asm/arch/system.h>
+#include <mach/system.h>
 
 void disable_hlt(void)
 {

arch/arm/lib/ecard.S

@@ -12,7 +12,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #define CPSR2SPSR(rt) \
 		mrs	rt, cpsr; \

arch/arm/lib/io-readsw-armv3.S

@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 .Linsw_bad_alignment:
 		adr	r0, .Linsw_bad_align_msg

arch/arm/lib/io-writesw-armv3.S

@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 .Loutsw_bad_alignment:
 		adr	r0, .Loutsw_bad_align_msg

arch/arm/mach-aaec2000/aaed2000.c

@@ -20,14 +20,14 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/aaed2000.h>
+#include <mach/aaed2000.h>
 
 #include "core.h"
 

arch/arm/mach-aaec2000/core.c

@@ -20,7 +20,7 @@
 #include <linux/timex.h>
 #include <linux/signal.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 

arch/arm/mach-aaec2000/include/mach/aaec2000.h

+/*
+ *  arch/arm/mach-aaec2000/include/mach/aaec2000.h
+ *
+ *  AAEC-2000 registers definition
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_AAEC2000_H
+#define __ASM_ARCH_AAEC2000_H
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not this file
+#endif /* __ASM_ARCH_HARDWARE_H */
+
+/* Chip selects */
+#define AAEC_CS0	0x00000000
+#define AAEC_CS1	0x10000000
+#define AAEC_CS2	0x20000000
+#define AAEC_CS3	0x30000000
+
+/* Flash */
+#define AAEC_FLASH_BASE	AAEC_CS0
+#define AAEC_FLASH_SIZE	SZ_64M
+
+/* Interrupt controller */
+#define IRQ_BASE	__REG(0x80000500)
+#define IRQ_INTSR	__REG(0x80000500)	/* Int Status Register */
+#define IRQ_INTRSR	__REG(0x80000504)	/* Int Raw (unmasked) Status */
+#define IRQ_INTENS	__REG(0x80000508)	/* Int Enable Set */
+#define IRQ_INTENC	__REG(0x8000050c)	/* Int Enable Clear */
+
+/* UART 1 */
+#define UART1_BASE	__REG(0x80000600)
+#define UART1_DR	__REG(0x80000600) /* Data/FIFO Register */
+#define UART1_LCR	__REG(0x80000604) /* Link Control Register */
+#define UART1_BRCR	__REG(0x80000608) /* Baud Rate Control Register */
+#define UART1_CR	__REG(0x8000060c) /* Control Register */
+#define UART1_SR	__REG(0x80000610) /* Status Register */
+#define UART1_INT	__REG(0x80000614) /* Interrupt Status Register */
+#define UART1_INTM	__REG(0x80000618) /* Interrupt Mask Register */
+#define UART1_INTRES	__REG(0x8000061c) /* Int Result (masked status) Register */
+
+/* UART 2 */
+#define UART2_BASE	__REG(0x80000700)
+#define UART2_DR	__REG(0x80000700) /* Data/FIFO Register */
+#define UART2_LCR	__REG(0x80000704) /* Link Control Register */
+#define UART2_BRCR	__REG(0x80000708) /* Baud Rate Control Register */
+#define UART2_CR	__REG(0x8000070c) /* Control Register */
+#define UART2_SR	__REG(0x80000710) /* Status Register */
+#define UART2_INT	__REG(0x80000714) /* Interrupt Status Register */
+#define UART2_INTM	__REG(0x80000718) /* Interrupt Mask Register */
+#define UART2_INTRES	__REG(0x8000071c) /* Int Result (masked status) Register */
+
+/* UART 3 */
+#define UART3_BASE	__REG(0x80000800)
+#define UART3_DR	__REG(0x80000800) /* Data/FIFO Register */
+#define UART3_LCR	__REG(0x80000804) /* Link Control Register */
+#define UART3_BRCR	__REG(0x80000808) /* Baud Rate Control Register */
+#define UART3_CR	__REG(0x8000080c) /* Control Register */
+#define UART3_SR	__REG(0x80000810) /* Status Register */
+#define UART3_INT	__REG(0x80000814) /* Interrupt Status Register */
+#define UART3_INTM	__REG(0x80000818) /* Interrupt Mask Register */
+#define UART3_INTRES	__REG(0x8000081c) /* Int Result (masked status) Register */
+
+/* These are used in some places */
+#define _UART1_BASE __PREG(UART1_BASE)
+#define _UART2_BASE __PREG(UART2_BASE)
+#define _UART3_BASE __PREG(UART3_BASE)
+
+/* UART Registers Offsets */
+#define UART_DR		0x00
+#define UART_LCR	0x04
+#define UART_BRCR	0x08
+#define UART_CR		0x0c
+#define UART_SR		0x10
+#define UART_INT	0x14
+#define UART_INTM	0x18
+#define UART_INTRES	0x1c
+
+/* UART_LCR Bitmask */
+#define UART_LCR_BRK	(1 << 0) /* Send Break */
+#define UART_LCR_PEN	(1 << 1) /* Parity Enable */
+#define UART_LCR_EP	(1 << 2) /* Even/Odd Parity */
+#define UART_LCR_S2	(1 << 3) /* One/Two Stop bits */
+#define UART_LCR_FIFO	(1 << 4) /* FIFO Enable */
+#define UART_LCR_WL5	(0 << 5) /* Word Length - 5 bits */
+#define UART_LCR_WL6	(1 << 5) /* Word Length - 6 bits */
+#define UART_LCR_WL7	(1 << 6) /* Word Length - 7 bits */
+#define UART_LCR_WL8	(1 << 7) /* Word Length - 8 bits */
+
+/* UART_CR Bitmask */
+#define UART_CR_EN	(1 << 0) /* UART Enable */
+#define UART_CR_SIR	(1 << 1) /* IrDA SIR Enable */
+#define UART_CR_SIRLP	(1 << 2) /* Low Power IrDA Enable */
+#define UART_CR_RXP	(1 << 3) /* Receive Pin Polarity */
+#define UART_CR_TXP	(1 << 4) /* Transmit Pin Polarity */
+#define UART_CR_MXP	(1 << 5) /* Modem Pin Polarity */
+#define UART_CR_LOOP	(1 << 6) /* Loopback Mode */
+
+/* UART_SR Bitmask */
+#define UART_SR_CTS	(1 << 0) /* Clear To Send Status */
+#define UART_SR_DSR	(1 << 1) /* Data Set Ready Status */
+#define UART_SR_DCD	(1 << 2) /* Data Carrier Detect Status */
+#define UART_SR_TxBSY	(1 << 3) /* Transmitter Busy Status */
+#define UART_SR_RxFE	(1 << 4) /* Receive FIFO Empty Status */
+#define UART_SR_TxFF	(1 << 5) /* Transmit FIFO Full Status */
+#define UART_SR_RxFF	(1 << 6) /* Receive FIFO Full Status */
+#define UART_SR_TxFE	(1 << 7) /* Transmit FIFO Empty Status */
+
+/* UART_INT Bitmask */
+#define UART_INT_RIS	(1 << 0) /* Rx Interrupt */
+#define UART_INT_TIS	(1 << 1) /* Tx Interrupt */
+#define UART_INT_MIS	(1 << 2) /* Modem Interrupt */
+#define UART_INT_RTIS	(1 << 3) /* Receive Timeout Interrupt */
+
+/* Timer 1 */
+#define TIMER1_BASE	__REG(0x80000c00)
+#define TIMER1_LOAD	__REG(0x80000c00)	/* Timer 1 Load Register */
+#define TIMER1_VAL	__REG(0x80000c04)	/* Timer 1 Value Register */
+#define TIMER1_CTRL	__REG(0x80000c08)	/* Timer 1 Control Register */
+#define TIMER1_CLEAR	__REG(0x80000c0c)	/* Timer 1 Clear Register */
+
+/* Timer 2 */
+#define TIMER2_BASE	__REG(0x80000d00)
+#define TIMER2_LOAD	__REG(0x80000d00)	/* Timer 2 Load Register */
+#define TIMER2_VAL	__REG(0x80000d04)	/* Timer 2 Value Register */
+#define TIMER2_CTRL	__REG(0x80000d08)	/* Timer 2 Control Register */
+#define TIMER2_CLEAR	__REG(0x80000d0c)	/* Timer 2 Clear Register */
+
+/* Timer 3 */
+#define TIMER3_BASE	__REG(0x80000e00)
+#define TIMER3_LOAD	__REG(0x80000e00)	/* Timer 3 Load Register */
+#define TIMER3_VAL	__REG(0x80000e04)	/* Timer 3 Value Register */
+#define TIMER3_CTRL	__REG(0x80000e08)	/* Timer 3 Control Register */
+#define TIMER3_CLEAR	__REG(0x80000e0c)	/* Timer 3 Clear Register */
+
+/* Timer Control register bits */
+#define TIMER_CTRL_ENABLE	(1 << 7) /* Enable (Start Timer) */
+#define TIMER_CTRL_PERIODIC	(1 << 6) /* Periodic Running Mode */
+#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */
+#define TIMER_CTRL_CLKSEL_508K	(1 << 3) /* 508KHz Clock select (Timer 1, 2) */
+#define TIMER_CTRL_CLKSEL_2K	(0 << 3) /* 2KHz Clock Select (Timer 1, 2) */
+
+/* Power and State Control */
+#define POWER_BASE	__REG(0x80000400)
+#define POWER_PWRSR	__REG(0x80000400) /* Power Status Register */
+#define POWER_PWRCNT	__REG(0x80000404) /* Power/Clock control */
+#define POWER_HALT	__REG(0x80000408) /* Power Idle Mode */
+#define POWER_STDBY	__REG(0x8000040c) /* Power Standby Mode */
+#define POWER_BLEOI	__REG(0x80000410) /* Battery Low End of Interrupt */
+#define POWER_MCEOI	__REG(0x80000414) /* Media Changed EoI */
+#define POWER_TEOI	__REG(0x80000418) /* Tick EoI */
+#define POWER_STFCLR	__REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
+#define POWER_CLKSET	__REG(0x80000420) /* Clock Speed Control */
+
+/* GPIO Registers */
+#define AAEC_GPIO_PHYS	0x80000e00
+
+#define AAEC_GPIO_PADR		__REG(AAEC_GPIO_PHYS + 0x00)
+#define AAEC_GPIO_PBDR		__REG(AAEC_GPIO_PHYS + 0x04)
+#define AAEC_GPIO_PCDR		__REG(AAEC_GPIO_PHYS + 0x08)
+#define AAEC_GPIO_PDDR		__REG(AAEC_GPIO_PHYS + 0x0c)
+#define AAEC_GPIO_PADDR		__REG(AAEC_GPIO_PHYS + 0x10)
+#define AAEC_GPIO_PBDDR		__REG(AAEC_GPIO_PHYS + 0x14)
+#define AAEC_GPIO_PCDDR		__REG(AAEC_GPIO_PHYS + 0x18)
+#define AAEC_GPIO_PDDDR		__REG(AAEC_GPIO_PHYS + 0x1c)
+#define AAEC_GPIO_PEDR		__REG(AAEC_GPIO_PHYS + 0x20)
+#define AAEC_GPIO_PEDDR		__REG(AAEC_GPIO_PHYS + 0x24)
+#define AAEC_GPIO_KSCAN		__REG(AAEC_GPIO_PHYS + 0x28)
+#define AAEC_GPIO_PINMUX	__REG(AAEC_GPIO_PHYS + 0x2c)
+#define AAEC_GPIO_PFDR		__REG(AAEC_GPIO_PHYS + 0x30)
+#define AAEC_GPIO_PFDDR		__REG(AAEC_GPIO_PHYS + 0x34)
+#define AAEC_GPIO_PGDR		__REG(AAEC_GPIO_PHYS + 0x38)
+#define AAEC_GPIO_PGDDR		__REG(AAEC_GPIO_PHYS + 0x3c)
+#define AAEC_GPIO_PHDR		__REG(AAEC_GPIO_PHYS + 0x40)
+#define AAEC_GPIO_PHDDR		__REG(AAEC_GPIO_PHYS + 0x44)
+#define AAEC_GPIO_RAZ		__REG(AAEC_GPIO_PHYS + 0x48)
+#define AAEC_GPIO_INTTYPE1	__REG(AAEC_GPIO_PHYS + 0x4c)
+#define AAEC_GPIO_INTTYPE2	__REG(AAEC_GPIO_PHYS + 0x50)
+#define AAEC_GPIO_FEOI		__REG(AAEC_GPIO_PHYS + 0x54)
+#define AAEC_GPIO_INTEN		__REG(AAEC_GPIO_PHYS + 0x58)
+#define AAEC_GPIO_INTSTATUS	__REG(AAEC_GPIO_PHYS + 0x5c)
+#define AAEC_GPIO_RAWINTSTATUS	__REG(AAEC_GPIO_PHYS + 0x60)
+#define AAEC_GPIO_DB		__REG(AAEC_GPIO_PHYS + 0x64)
+#define AAEC_GPIO_PAPINDR	__REG(AAEC_GPIO_PHYS + 0x68)
+#define AAEC_GPIO_PBPINDR	__REG(AAEC_GPIO_PHYS + 0x6c)
+#define AAEC_GPIO_PCPINDR	__REG(AAEC_GPIO_PHYS + 0x70)
+#define AAEC_GPIO_PDPINDR	__REG(AAEC_GPIO_PHYS + 0x74)
+#define AAEC_GPIO_PEPINDR	__REG(AAEC_GPIO_PHYS + 0x78)
+#define AAEC_GPIO_PFPINDR	__REG(AAEC_GPIO_PHYS + 0x7c)
+#define AAEC_GPIO_PGPINDR	__REG(AAEC_GPIO_PHYS + 0x80)
+#define AAEC_GPIO_PHPINDR	__REG(AAEC_GPIO_PHYS + 0x84)
+
+#define AAEC_GPIO_PINMUX_PE0CON		(1 << 0)
+#define AAEC_GPIO_PINMUX_PD0CON		(1 << 1)
+#define AAEC_GPIO_PINMUX_CODECON	(1 << 2)
+#define AAEC_GPIO_PINMUX_UART3CON	(1 << 3)
+
+/* LCD Controller */
+#define AAEC_CLCD_PHYS	0x80003000
+
+#endif /* __ARM_ARCH_AAEC2000_H */

arch/arm/mach-aaec2000/include/mach/aaed2000.h

+/*
+ *  arch/arm/mach-aaec2000/include/mach/aaed2000.h
+ *
+ *  AAED-2000 specific bits definition
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_AAED2000_H
+#define __ASM_ARCH_AAED2000_H
+
+/* External GPIOs. */
+
+#define EXT_GPIO_PBASE	AAEC_CS3
+#define EXT_GPIO_VBASE	0xf8100000
+#define EXT_GPIO_LENGTH	0x00001000
+
+#define __ext_gpio_p2v(x)	((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE)
+#define __ext_gpio_v2p(x)	((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE)
+
+#define __EXT_GPIO_REG(x)	(*((volatile u32 *)__ext_gpio_p2v(x)))
+#define __EXT_GPIO_PREG(x)	(__ext_gpio_v2p((u32)&(x)))
+
+#define AAED_EXT_GPIO	__EXT_GPIO_REG(EXT_GPIO_PBASE)
+
+#define AAED_EGPIO_KBD_SCAN	0x00003fff /* Keyboard scan data */
+#define AAED_EGPIO_PWR_INT	0x00008fff /* Smart battery charger interrupt */
+#define AAED_EGPIO_SWITCHED	0x000f0000 /* DIP Switches */
+#define AAED_EGPIO_USB_VBUS	0x00400000 /* USB Vbus sense */
+#define AAED_EGPIO_LCD_PWR_EN	0x02000000 /* LCD and backlight PWR enable */
+#define AAED_EGPIO_nLED0	0x20000000 /* LED 0 */
+#define AAED_EGPIO_nLED1	0x20000000 /* LED 1 */
+#define AAED_EGPIO_nLED2	0x20000000 /* LED 2 */
+
+
+#endif /* __ARM_ARCH_AAED2000_H */

arch/arm/mach-aaec2000/include/mach/debug-macro.S

+/*  arch/arm/mach-aaec2000/include/mach/debug-macro.S
+ *
+ *  Debugging macro include header
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include "hardware.h"
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x80000000		@ physical
+		movne	\rx, #io_p2v(0x80000000)	@ virtual
+		orr	\rx, \rx, #0x00000800
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x10]
+		tst	\rd, #(1 << 7)
+		beq	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+#if 0
+1001:		ldr	\rd, [\rx, #0x10]
+		tst	\rd, #(1 << 5)
+		beq	1001b
+#endif
+		.endm

arch/arm/mach-aaec2000/include/mach/dma.h

+/*
+ *  arch/arm/mach-aaec2000/include/mach/dma.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */

arch/arm/mach-aaec2000/include/mach/entry-macro.S

+/*
+ *  arch/arm/mach-aaec2000/include/mach/entry-macro.S
+ *
+ *  Low-level IRQ helper for aaec-2000 based platforms
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+#include <mach/irqs.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	r4, #0xf8000000
+		add	r4, r4, #0x00000500
+		mov	\base, r4
+		ldr	\irqstat, [\base, #0]
+		cmp	\irqstat, #0
+		bne	1001f
+		ldr	\irqnr, =NR_IRQS+1
+		b       1003f
+1001:		mov	\irqnr, #0
+1002:		ands	\tmp, \irqstat, #1
+		mov	\irqstat, \irqstat, LSR #1
+		add	\irqnr, \irqnr, #1
+		beq	1002b
+		sub	\irqnr, \irqnr, #1
+1003:
+		.endm

arch/arm/mach-aaec2000/include/mach/hardware.h

+/*
+ *  arch/arm/mach-aaec2000/include/mach/hardware.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/aaec2000.h>
+
+/* The kernel is loaded at physical address 0xf8000000.
+ * We map the IO space a bit after
+ */
+#define PIO_APB_BASE	0x80000000
+#define VIO_APB_BASE	0xf8000000
+#define IO_APB_LENGTH	0x2000
+#define PIO_AHB_BASE	0x80002000
+#define VIO_AHB_BASE	0xf8002000
+#define IO_AHB_LENGTH	0x2000
+
+#define VIO_BASE    VIO_APB_BASE
+#define PIO_BASE    PIO_APB_BASE
+
+#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE )
+#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE )
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+/* FIXME: Is it needed to optimize this a la pxa ?? */
+#define __REG(x)    (*((volatile u32 *)io_p2v(x)))
+#define __PREG(x)   (io_v2p((u32)&(x)))
+
+#else /* __ASSEMBLY__ */
+
+#define __REG(x)    io_p2v(x)
+#define __PREG(x)   io_v2p(x)
+
+#endif
+
+#include "aaec2000.h"
+
+#endif /* __ASM_ARCH_HARDWARE_H */

arch/arm/mach-aaec2000/include/mach/io.h

+/*
+ *  arch/arm/mach-aaec2000/include/mach/io.h
+ *
+ *  Copied from asm/arch/sa1100/io.h
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif

arch/arm/mach-aaec2000/include/mach/irqs.h

+/*
+ *  arch/arm/mach-aaec2000/include/mach/irqs.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define INT_GPIOF0_FIQ	0  /* External GPIO Port F O Fast Interrupt Input */
+#define INT_BL_FIQ	1  /* Battery Low Fast Interrupt */
+#define INT_WE_FIQ	2  /* Watchdog Expired Fast Interrupt */
+#define INT_MV_FIQ	3  /* Media Changed Interrupt */
+#define INT_SC		4  /* Sound Codec Interrupt */
+#define INT_GPIO1	5  /* GPIO Port F Configurable Int 1 */
+#define INT_GPIO2	6  /* GPIO Port F Configurable Int 2 */
+#define INT_GPIO3	7  /* GPIO Port F Configurable Int 3 */
+#define INT_TMR1_OFL	8  /* Timer 1 Overflow Interrupt */
+#define INT_TMR2_OFL	9  /* Timer 2 Overflow Interrupt */
+#define INT_RTC_CM	10 /* RTC Compare Match Interrupt */
+#define INT_TICK	11 /* 64Hz Tick Interrupt */
+#define INT_UART1	12 /* UART1 Interrupt */
+#define INT_UART2	13 /* UART2 & Modem State Changed Interrupt */
+#define INT_LCD		14 /* LCD Interrupt */
+#define INT_SSI		15 /* SSI End of Transfer Interrupt */
+#define INT_UART3	16 /* UART3 Interrupt */
+#define INT_SCI		17 /* SCI Interrupt */
+#define INT_AAC		18 /* Advanced Audio Codec Interrupt */
+#define INT_MMC		19 /* MMC Interrupt */
+#define INT_USB		20 /* USB Interrupt */
+#define INT_DMA		21 /* DMA Interrupt */
+#define INT_TMR3_UOFL	22 /* Timer 3 Underflow Interrupt */
+#define INT_GPIO4	23 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO5	24 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO6	25 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO7	26 /* GPIO Port F Configurable Int 4 */
+#define INT_BMI		27 /* BMI Interrupt */
+
+#define NR_IRQS		(INT_BMI + 1)
+
+#endif /* __ASM_ARCH_IRQS_H */

arch/arm/mach-aaec2000/include/mach/memory.h

+/*
+ *  arch/arm/mach-aaec2000/include/mach/memory.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+
+#define PHYS_OFFSET	UL(0xf0000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+/*
+ * The nodes are the followings:
+ *
+ *   node 0: 0xf000.0000 - 0xf3ff.ffff
+ *   node 1: 0xf400.0000 - 0xf7ff.ffff
+ *   node 2: 0xf800.0000 - 0xfbff.ffff
+ *   node 3: 0xfc00.0000 - 0xffff.ffff
+ */
+#define NODE_MEM_SIZE_BITS	26
+
+#endif /* __ASM_ARCH_MEMORY_H */

arch/arm/mach-aaec2000/include/mach/system.h

+/*
+ *  arch/arm/mach-aaed2000/include/mach/system.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */

arch/arm/mach-aaec2000/include/mach/timex.h

+/*
+ *  arch/arm/mach-aaec2000/include/mach/timex.h
+ *
+ *  AAEC-2000 Architecture timex specification
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE		508000
+
+#endif /* __ASM_ARCH_TIMEX_H */

arch/arm/mach-aaec2000/include/mach/uncompress.h

+/*
+ *  arch/arm/mach-aaec2000/include/mach/uncompress.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include "hardware.h"
+
+#define UART(x)         (*(volatile unsigned long *)(serial_port + (x)))
+
+static void putc(int c)
+{
+	unsigned long serial_port;
+        do {
+		serial_port = _UART3_BASE;
+		if (UART(UART_CR) & UART_CR_EN) break;
+		serial_port = _UART1_BASE;
+		if (UART(UART_CR) & UART_CR_EN) break;
+		serial_port = _UART2_BASE;
+		if (UART(UART_CR) & UART_CR_EN) break;
+		return;
+	} while (0);
+
+	/* wait for space in the UART's transmitter */
+	while ((UART(UART_SR) & UART_SR_TxFF))
+		barrier();
+
+	/* send the character out. */
+	UART(UART_DR) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */

arch/arm/mach-aaec2000/include/mach/vmalloc.h

+/*
+ *  arch/arm/mach-aaec2000/include/mach/vmalloc.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END		(PAGE_OFFSET + 0x10000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */

arch/arm/mach-at91/at91cap9.c

@@ -17,10 +17,10 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91cap9.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"

arch/arm/mach-at91/at91cap9_devices.c

@@ -20,11 +20,11 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91cap9.h>
+#include <mach/at91cap9_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/at91rm9200.c

@@ -14,9 +14,9 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_st.h>
+#include <mach/at91rm9200.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_st.h>
 
 #include "generic.h"
 #include "clock.h"

arch/arm/mach-at91/at91rm9200_devices.c

@@ -17,10 +17,10 @@
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/at91rm9200_time.c

@@ -26,7 +26,7 @@
 
 #include <asm/mach/time.h>
 
-#include <asm/arch/at91_st.h>
+#include <mach/at91_st.h>
 
 static unsigned long last_crtr;
 static u32 irqmask;

arch/arm/mach-at91/at91sam9260.c

@@ -15,11 +15,11 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9260.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"

arch/arm/mach-at91/at91sam9260_devices.c

@@ -16,12 +16,12 @@
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91sam9260_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9260.h>
+#include <mach/at91sam9260_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/at91sam9261.c

@@ -15,10 +15,10 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91sam9261.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"

arch/arm/mach-at91/at91sam9261_devices.c

@@ -20,11 +20,11 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91sam9261_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9261.h>
+#include <mach/at91sam9261_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/at91sam9263.c

@@ -15,10 +15,10 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"

arch/arm/mach-at91/at91sam9263_devices.c

@@ -19,11 +19,11 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91sam9263_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91sam9263_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/at91sam926x_time.c

@@ -17,7 +17,7 @@
 
 #include <asm/mach/time.h>
 
-#include <asm/arch/at91_pit.h>
+#include <mach/at91_pit.h>
 
 
 #define PIT_CPIV(x)	((x) & AT91_PIT_CPIV)

arch/arm/mach-at91/at91sam9rl.c

@@ -14,11 +14,11 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9rl.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9rl.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -16,11 +16,11 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9rl.h>
-#include <asm/arch/at91sam9rl_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9rl.h>
+#include <mach/at91sam9rl_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/at91x40.c

@@ -14,9 +14,9 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/at91x40.h>
-#include <asm/arch/at91_st.h>
-#include <asm/arch/timex.h>
+#include <mach/at91x40.h>
+#include <mach/at91_st.h>
+#include <mach/timex.h>
 #include "generic.h"
 
 /*

arch/arm/mach-at91/at91x40_time.c

@@ -23,10 +23,10 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/time.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/time.h>
-#include <asm/arch/at91_tc.h>
+#include <mach/at91_tc.h>
 
 /*
  *	3 counter/timer units present.

arch/arm/mach-at91/board-1arm.c

@@ -24,7 +24,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -33,8 +33,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-cam60.c

@@ -28,7 +28,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,8 +37,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-cap9adk.c

@@ -33,7 +33,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -42,10 +42,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91cap9_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-carmeva.c

@@ -25,7 +25,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-csb337.c

@@ -28,7 +28,7 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,8 +37,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-csb637.c

@@ -25,7 +25,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-dk.c

@@ -29,7 +29,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-eb01.c

@@ -24,10 +24,10 @@
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
 #include "generic.h"
 
 static void __init at91eb01_map_io(void)

arch/arm/mach-at91/board-eb9200.c

@@ -25,7 +25,7 @@
 #include <linux/module.h>
 #include <linux/device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-ecbat91.c

@@ -27,7 +27,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -36,8 +36,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-ek.c

@@ -29,7 +29,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-kafa.c

@@ -24,7 +24,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -33,8 +33,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-kb9202.c

@@ -25,7 +25,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,10 +34,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-picotux200.c

@@ -27,7 +27,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -36,9 +36,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-qil-a9260.c

@@ -30,7 +30,7 @@
 #include <linux/input.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -39,9 +39,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-sam9-l9260.c

@@ -27,7 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -36,8 +36,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-sam9260ek.c

@@ -28,7 +28,7 @@
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,8 +37,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-sam9261ek.c

@@ -35,7 +35,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -44,9 +44,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-sam9263ek.c

@@ -32,7 +32,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -41,9 +41,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-sam9g20ek.c

@@ -26,7 +26,7 @@
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -35,8 +35,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-sam9rlek.c

@@ -18,7 +18,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -27,9 +27,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-usb-a9260.c

@@ -30,7 +30,7 @@
 #include <linux/input.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -39,9 +39,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-usb-a9263.c

@@ -29,7 +29,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/board-yl-9200.c

@@ -33,7 +33,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -42,9 +42,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/clock.c

@@ -25,9 +25,9 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/cpu.h>
+#include <mach/hardware.h>
+#include <mach/at91_pmc.h>
+#include <mach/cpu.h>
 
 #include "clock.h"