Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 4 年多

通知 15
Star 8
Fork 2
K
kernel_linux
“944ce9af4767ca085d465e4add69df11a8faa9ef”上不存在“kernel/rcu/srcu.c”
提交 9ed88554 编写于 作者: B bjorn.helgaas@hp.com 提交者： Greg Kroah-Hartman
浏览文件
操作

PCI: use dev_printk in x86 quirk messages 

Convert quirk printks to dev_printk().
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 f0fda801
显示空白变更内容
内联 并排
Showing with 34 addition and 31 deletion
arch/x86/kernel/quirks.c
浏览文件 @ 9ed88554
...@@ -30,8 +30,8 @@ static void __devinit quirk_intel_irqbalance(struct pci_dev *dev) ...@@ -30,8 +30,8 @@ static void __devinit quirk_intel_irqbalance(struct pci_dev *dev)
raw_pci_ops->read(0, 0, 0x40, 0x4c, 2, &word); raw_pci_ops->read(0, 0, 0x40, 0x4c, 2, &word);
if (!(word & (1 << 13))) { if (!(word & (1 << 13))) {
printk(KERN_INFO "Intel E7520/7320/7525 detected. " dev_info(&dev->dev, "Intel E7520/7320/7525 detected; "
"Disabling irq balancing and affinity\n"); "disabling irq balancing and affinity\n");
#ifdef CONFIG_IRQBALANCE #ifdef CONFIG_IRQBALANCE
irqbalance_disable(""); irqbalance_disable("");
#endif #endif
...@@ -104,14 +104,16 @@ static void ich_force_enable_hpet(struct pci_dev *dev) ...@@ -104,14 +104,16 @@ static void ich_force_enable_hpet(struct pci_dev *dev)
pci_read_config_dword(dev, 0xF0, &rcba); pci_read_config_dword(dev, 0xF0, &rcba);
rcba &= 0xFFFFC000; rcba &= 0xFFFFC000;
if (rcba == 0) { if (rcba == 0) {
printk(KERN_DEBUG "RCBA disabled. Cannot force enable HPET\n"); dev_printk(KERN_DEBUG, &dev->dev, "RCBA disabled; "
"cannot force enable HPET\n");
return; return;
} }
/* use bits 31:14, 16 kB aligned */ /* use bits 31:14, 16 kB aligned */
rcba_base = ioremap_nocache(rcba, 0x4000); rcba_base = ioremap_nocache(rcba, 0x4000);
if (rcba_base == NULL) { if (rcba_base == NULL) {
printk(KERN_DEBUG "ioremap failed. Cannot force enable HPET\n"); dev_printk(KERN_DEBUG, &dev->dev, "ioremap failed; "
"cannot force enable HPET\n");
return; return;
} }
...@@ -122,8 +124,8 @@ static void ich_force_enable_hpet(struct pci_dev *dev) ...@@ -122,8 +124,8 @@ static void ich_force_enable_hpet(struct pci_dev *dev)
/* HPET is enabled in HPTC. Just not reported by BIOS */ /* HPET is enabled in HPTC. Just not reported by BIOS */
val = val & 0x3; val = val & 0x3;
force_hpet_address = 0xFED00000 | (val << 12); force_hpet_address = 0xFED00000 | (val << 12);
printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n", dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
force_hpet_address); "0x%lx\n", force_hpet_address);
iounmap(rcba_base); iounmap(rcba_base);
return; return;
} }
...@@ -142,11 +144,12 @@ static void ich_force_enable_hpet(struct pci_dev *dev) ...@@ -142,11 +144,12 @@ static void ich_force_enable_hpet(struct pci_dev *dev)
if (err) { if (err) {
force_hpet_address = 0; force_hpet_address = 0;
iounmap(rcba_base); iounmap(rcba_base);
printk(KERN_DEBUG "Failed to force enable HPET\n"); dev_printk(KERN_DEBUG, &dev->dev,
"Failed to force enable HPET\n");
} else { } else {
force_hpet_resume_type = ICH_FORCE_HPET_RESUME; force_hpet_resume_type = ICH_FORCE_HPET_RESUME;
printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n", dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
force_hpet_address); "0x%lx\n", force_hpet_address);
} }
} }
...@@ -208,7 +211,7 @@ static void old_ich_force_enable_hpet(struct pci_dev *dev) ...@@ -208,7 +211,7 @@ static void old_ich_force_enable_hpet(struct pci_dev *dev)
if (val & 0x4) { if (val & 0x4) {
val &= 0x3; val &= 0x3;
force_hpet_address = 0xFED00000 | (val << 12); force_hpet_address = 0xFED00000 | (val << 12);
printk(KERN_DEBUG "HPET at base address 0x%lx\n", dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
force_hpet_address); force_hpet_address);
return; return;
} }
...@@ -229,14 +232,14 @@ static void old_ich_force_enable_hpet(struct pci_dev *dev) ...@@ -229,14 +232,14 @@ static void old_ich_force_enable_hpet(struct pci_dev *dev)
/* HPET is enabled in HPTC. Just not reported by BIOS */ /* HPET is enabled in HPTC. Just not reported by BIOS */
val &= 0x3; val &= 0x3;
force_hpet_address = 0xFED00000 | (val << 12); force_hpet_address = 0xFED00000 | (val << 12);
printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n", dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
force_hpet_address); "0x%lx\n", force_hpet_address);
cached_dev = dev; cached_dev = dev;
force_hpet_resume_type = OLD_ICH_FORCE_HPET_RESUME; force_hpet_resume_type = OLD_ICH_FORCE_HPET_RESUME;
return; return;
} }
printk(KERN_DEBUG "Failed to force enable HPET\n"); dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
} }
/* /*
...@@ -294,7 +297,7 @@ static void vt8237_force_enable_hpet(struct pci_dev *dev) ...@@ -294,7 +297,7 @@ static void vt8237_force_enable_hpet(struct pci_dev *dev)
*/ */
if (val & 0x80) { if (val & 0x80) {
force_hpet_address = (val & ~0x3ff); force_hpet_address = (val & ~0x3ff);
printk(KERN_DEBUG "HPET at base address 0x%lx\n", dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
force_hpet_address); force_hpet_address);
return; return;
} }
...@@ -309,14 +312,14 @@ static void vt8237_force_enable_hpet(struct pci_dev *dev) ...@@ -309,14 +312,14 @@ static void vt8237_force_enable_hpet(struct pci_dev *dev)
pci_read_config_dword(dev, 0x68, &val); pci_read_config_dword(dev, 0x68, &val);
if (val & 0x80) { if (val & 0x80) {
force_hpet_address = (val & ~0x3ff); force_hpet_address = (val & ~0x3ff);
printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n", dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
force_hpet_address); "0x%lx\n", force_hpet_address);
cached_dev = dev; cached_dev = dev;
force_hpet_resume_type = VT8237_FORCE_HPET_RESUME; force_hpet_resume_type = VT8237_FORCE_HPET_RESUME;
return; return;
} }
printk(KERN_DEBUG "Failed to force enable HPET\n"); dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
} }
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235,
...@@ -344,7 +347,7 @@ static void nvidia_force_enable_hpet(struct pci_dev *dev) ...@@ -344,7 +347,7 @@ static void nvidia_force_enable_hpet(struct pci_dev *dev)
pci_read_config_dword(dev, 0x44, &val); pci_read_config_dword(dev, 0x44, &val);
force_hpet_address = val & 0xfffffffe; force_hpet_address = val & 0xfffffffe;
force_hpet_resume_type = NVIDIA_FORCE_HPET_RESUME; force_hpet_resume_type = NVIDIA_FORCE_HPET_RESUME;
printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n", dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
force_hpet_address); force_hpet_address);
cached_dev = dev; cached_dev = dev;
return; return;
......
arch/x86/pci/fixup.c
浏览文件 @ 9ed88554
...@@ -17,7 +17,7 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d) ...@@ -17,7 +17,7 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
int pxb, reg; int pxb, reg;
u8 busno, suba, subb; u8 busno, suba, subb;
printk(KERN_WARNING "PCI: Searching for i450NX host bridges on %s\n", pci_name(d)); dev_warn(&d->dev, "Searching for i450NX host bridges\n");
reg = 0xd0; reg = 0xd0;
for(pxb = 0; pxb < 2; pxb++) { for(pxb = 0; pxb < 2; pxb++) {
pci_read_config_byte(d, reg++, &busno); pci_read_config_byte(d, reg++, &busno);
...@@ -41,7 +41,7 @@ static void __devinit pci_fixup_i450gx(struct pci_dev *d) ...@@ -41,7 +41,7 @@ static void __devinit pci_fixup_i450gx(struct pci_dev *d)
*/ */
u8 busno; u8 busno;
pci_read_config_byte(d, 0x4a, &busno); pci_read_config_byte(d, 0x4a, &busno);
printk(KERN_INFO "PCI: i440KX/GX host bridge %s: secondary bus %02x\n", pci_name(d), busno); dev_info(&d->dev, "i440KX/GX host bridge; secondary bus %02x\n", busno);
pci_scan_bus_with_sysdata(busno); pci_scan_bus_with_sysdata(busno);
pcibios_last_bus = -1; pcibios_last_bus = -1;
} }
...@@ -55,7 +55,7 @@ static void __devinit pci_fixup_umc_ide(struct pci_dev *d) ...@@ -55,7 +55,7 @@ static void __devinit pci_fixup_umc_ide(struct pci_dev *d)
*/ */
int i; int i;
printk(KERN_WARNING "PCI: Fixing base address flags for device %s\n", pci_name(d)); dev_warn(&d->dev, "Fixing base address flags\n");
for(i = 0; i < 4; i++) for(i = 0; i < 4; i++)
d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO; d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
} }
...@@ -68,7 +68,7 @@ static void __devinit pci_fixup_ncr53c810(struct pci_dev *d) ...@@ -68,7 +68,7 @@ static void __devinit pci_fixup_ncr53c810(struct pci_dev *d)
* Fix class to be PCI_CLASS_STORAGE_SCSI * Fix class to be PCI_CLASS_STORAGE_SCSI
*/ */
if (!d->class) { if (!d->class) {
printk(KERN_WARNING "PCI: fixing NCR 53C810 class code for %s\n", pci_name(d)); dev_warn(&d->dev, "Fixing NCR 53C810 class code\n");
d->class = PCI_CLASS_STORAGE_SCSI << 8; d->class = PCI_CLASS_STORAGE_SCSI << 8;
} }
} }
...@@ -80,7 +80,7 @@ static void __devinit pci_fixup_latency(struct pci_dev *d) ...@@ -80,7 +80,7 @@ static void __devinit pci_fixup_latency(struct pci_dev *d)
* SiS 5597 and 5598 chipsets require latency timer set to * SiS 5597 and 5598 chipsets require latency timer set to
* at most 32 to avoid lockups. * at most 32 to avoid lockups.
*/ */
DBG("PCI: Setting max latency to 32\n"); dev_dbg(&d->dev, "Setting max latency to 32\n");
pcibios_max_latency = 32; pcibios_max_latency = 32;
} }
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency);
...@@ -138,7 +138,7 @@ static void pci_fixup_via_northbridge_bug(struct pci_dev *d) ...@@ -138,7 +138,7 @@ static void pci_fixup_via_northbridge_bug(struct pci_dev *d)
pci_read_config_byte(d, where, &v); pci_read_config_byte(d, where, &v);
if (v & ~mask) { if (v & ~mask) {
printk(KERN_WARNING "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \ dev_warn(&d->dev, "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \
d->device, d->revision, where, v, mask, v & mask); d->device, d->revision, where, v, mask, v & mask);
v &= mask; v &= mask;
pci_write_config_byte(d, where, v); pci_write_config_byte(d, where, v);
...@@ -200,7 +200,7 @@ static void pci_fixup_nforce2(struct pci_dev *dev) ...@@ -200,7 +200,7 @@ static void pci_fixup_nforce2(struct pci_dev *dev)
* Apply fixup if needed, but don't touch disconnect state * Apply fixup if needed, but don't touch disconnect state
*/ */
if ((val & 0x00FF0000) != 0x00010000) { if ((val & 0x00FF0000) != 0x00010000) {
printk(KERN_WARNING "PCI: nForce2 C1 Halt Disconnect fixup\n"); dev_warn(&dev->dev, "nForce2 C1 Halt Disconnect fixup\n");
pci_write_config_dword(dev, 0x6c, (val & 0xFF00FFFF) | 0x00010000); pci_write_config_dword(dev, 0x6c, (val & 0xFF00FFFF) | 0x00010000);
} }
} }
...@@ -348,7 +348,7 @@ static void __devinit pci_fixup_video(struct pci_dev *pdev) ...@@ -348,7 +348,7 @@ static void __devinit pci_fixup_video(struct pci_dev *pdev)
pci_read_config_word(pdev, PCI_COMMAND, &config); pci_read_config_word(pdev, PCI_COMMAND, &config);
if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev)); dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n");
} }
} }
DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video); DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
...@@ -388,11 +388,11 @@ static void __devinit pci_fixup_msi_k8t_onboard_sound(struct pci_dev *dev) ...@@ -388,11 +388,11 @@ static void __devinit pci_fixup_msi_k8t_onboard_sound(struct pci_dev *dev)
/* verify the change for status output */ /* verify the change for status output */
pci_read_config_byte(dev, 0x50, &val); pci_read_config_byte(dev, 0x50, &val);
if (val & 0x40) if (val & 0x40)
printk(KERN_INFO "PCI: Detected MSI K8T Neo2-FIR, " dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; "
"can't enable onboard soundcard!\n"); "can't enable onboard soundcard!\n");
else else
printk(KERN_INFO "PCI: Detected MSI K8T Neo2-FIR, " dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; "
"enabled onboard soundcard.\n"); "enabled onboard soundcard\n");
} }
} }
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237,
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或