Merge tag 'devicetree-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "A fairly large (by DT standards) pull request this time with the
  majority being some overdue moving DT binding docs around to
  consolidate similar bindings.

   - DT binding doc consolidation moving similar bindings to common
     locations.  The majority of these are display related which were
     scattered in video/, fb/, drm/, gpu/, and panel/ directories.

   - Add new config option, CONFIG_OF_ALL_DTBS, to enable building all
     dtbs in the tree for most arches with dts files (except powerpc for
     now).

   - OF_IRQ=n fixes for user enabled CONFIG_OF.

   - of_node_put ref counting fixes from Julia Lawall.

   - Common DT binding for wakeup-source and deprecation of all similar
     bindings.

   - DT binding for PXA LCD controller.

   - Allow ignoring failed PCI resource translations in order to ignore
     64-bit addresses on non-LPAE 32-bit kernels.

   - Support setting the NUMA node from DT instead of only from parent
     device.

   - Couple of earlycon DT parsing fixes for address and options"

* tag 'devicetree-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (45 commits)
  MAINTAINERS: update DT binding doc locations
  devicetree: add Sigma Designs vendor prefix
  of: simplify arch_find_n_match_cpu_physical_id() function
  Documentation: arm: Fixed typo in socfpga fpga mgr example
  Documentation: devicetree: fix reference to legacy wakeup properties
  Documentation: devicetree: standardize/consolidate on "wakeup-source" property
  drivers: of: removing assignment of 0 to static variable
  xtensa: enable building of all dtbs
  mips: enable building of all dtbs
  metag: enable building of all dtbs
  metag: use common make variables for dtb builds
  h8300: enable building of all dtbs
  arm64: enable building of all dtbs
  arm: enable building of all dtbs
  arc: enable building of all dtbs
  arc: use common make variables for dtb builds
  of: add config option to enable building of all dtbs
  of/fdt: fix error checking for earlycon address
  of/overlay: add missing of_node_put
  of/platform: add missing of_node_put
  ...

Documentation/devicetree/bindings/crypto/fsl-sec4.txt

@@ -441,7 +441,7 @@ EXAMPLE:
 		regmap = <&snvs>;
 		interrupts = <0 4 0x4>
 	        linux,keycode = <116>; /* KEY_POWER */
-		wakeup;
+		wakeup-source;
 	};
 
 =====================================================================
@@ -530,7 +530,7 @@ FULL EXAMPLE
 			regmap = <&sec_mon>;
 			interrupts = <0 4 0x4>;
 			linux,keycode = <116>; /* KEY_POWER */
-			wakeup;
+			wakeup-source;
 		};
 	};
 

Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt → Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt

@@ -14,8 +14,8 @@ Required properties:
 -port@[X]: SoC specific port nodes with endpoint definitions as defined
    in Documentation/devicetree/bindings/media/video-interfaces.txt,
    please refer to the SoC specific binding document:
-    * Documentation/devicetree/bindings/drm/imx/hdmi.txt
-    * Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt
+    * Documentation/devicetree/bindings/display/imx/hdmi.txt
+    * Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
 
 Optional properties
 - reg-io-width: the width of the reg:1,4, default set to 1 if not present

Documentation/devicetree/bindings/video/cirrus,clps711x-fb.txt → Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt

@@ -6,7 +6,7 @@ Required properties:
               location and size of the framebuffer memory.
 - clocks    : phandle + clock specifier pair of the FB reference clock.
 - display   : phandle to a display node as described in
-              Documentation/devicetree/bindings/video/display-timing.txt.
+              Documentation/devicetree/bindings/display/display-timing.txt.
               Additionally, the display node has to define properties:
   - bits-per-pixel: Bits per pixel.
   - ac-prescale   : LCD AC bias frequency. This frequency is the required

Documentation/devicetree/bindings/video/exynos7-decon.txt → Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt

@@ -38,7 +38,7 @@ Optional Properties:
 		Can be used in case timings cannot be provided otherwise
 		or to override timings provided by the panel.
 
-[1]: Documentation/devicetree/bindings/video/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/display-timing.txt
 
 Example:
 

Documentation/devicetree/bindings/video/exynos_dp.txt → Documentation/devicetree/bindings/display/exynos/exynos_dp.txt

@@ -50,7 +50,7 @@ Required properties for dp-controller:
 		number of lanes supported by the panel.
 			LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
 	- display-timings: timings for the connected panel as described by
-		Documentation/devicetree/bindings/video/display-timing.txt
+		Documentation/devicetree/bindings/display/display-timing.txt
 
 Optional properties for dp-controller:
 	-interlaced:

Documentation/devicetree/bindings/video/exynos_dsim.txt → Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt

@@ -49,7 +49,7 @@ Video interfaces:
       mode
     - samsung,esc-clock-frequency: specifies DSI frequency in escape mode
 
-[1]: Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
+[1]: Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:

Documentation/devicetree/bindings/video/samsung-fimd.txt → Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt

@@ -82,7 +82,7 @@ in [2]. The following are properties specific to those nodes:
 		3 - for parallel output,
 		4 - for write-back interface
 
-[1]: Documentation/devicetree/bindings/video/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/display-timing.txt
 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:

Documentation/devicetree/bindings/video/fsl,imx-fb.txt → Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt

@@ -9,7 +9,7 @@ Required properties:
 
 Required nodes:
 - display: Phandle to a display node as described in
-	Documentation/devicetree/bindings/video/display-timing.txt
+	Documentation/devicetree/bindings/display/display-timing.txt
 	Additional, the display node has to define properties:
 	- bits-per-pixel: Bits per pixel
 	- fsl,pcr: LCDC PCR value

Documentation/devicetree/bindings/drm/imx/ldb.txt → Documentation/devicetree/bindings/display/imx/ldb.txt

@@ -63,7 +63,7 @@ Required properties:
 
 Optional properties (required if display-timings are used):
  - display-timings : A node that describes the display timings as defined in
-   Documentation/devicetree/bindings/video/display-timing.txt.
+   Documentation/devicetree/bindings/display/display-timing.txt.
  - fsl,data-mapping : should be "spwg" or "jeida"
                       This describes how the color bits are laid out in the
                       serialized LVDS signal.

Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt

+PXA LCD Controller
+------------------
+
+Required properties:
+ - compatible : one of these
+	"marvell,pxa2xx-lcdc",
+	"marvell,pxa270-lcdc",
+	"marvell,pxa300-lcdc"
+ - reg : should contain 1 register range (address and length).
+ - interrupts : framebuffer controller interrupt.
+ - clocks: phandle to input clocks
+
+Required nodes:
+ - port: connection to the LCD panel (see video-interfaces.txt)
+	 This node must have its properties bus-width and remote-endpoint set.
+	 If the panel is not a TFT color panel, then a "lcd-type" property in
+	 the panel should specify the panel type.
+	 This panel node should be in the board dts.
+
+Example:
+	lcd-controller@40500000 {
+		compatible = "marvell,pxa2xx-lcdc";
+		reg = <0x44000000 0x10000>;
+		interrupts = <17>;
+		clocks = <&clks CLK_LCD>;
+		status = "okay";
+
+		port {
+			lcdc_out: endpoint {
+				remote-endpoint = <&panel_in>;
+				bus-width = <16>;
+			};
+		};
+	};

Documentation/devicetree/bindings/drm/msm/dsi.txt → Documentation/devicetree/bindings/display/msm/dsi.txt

@@ -28,7 +28,7 @@ Required properties:
 
 Optional properties:
 - panel@0: Node of panel connected to this DSI controller.
-  See files in Documentation/devicetree/bindings/panel/ for each supported
+  See files in Documentation/devicetree/bindings/display/panel/ for each supported
   panel.
 - qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is
   driving a panel which needs 2 DSI links.

Documentation/devicetree/bindings/video/panel-dpi.txt → Documentation/devicetree/bindings/display/panel/panel-dpi.txt

@@ -10,7 +10,7 @@ Optional properties:
 
 Required nodes:
 - "panel-timing" containing video timings
-  (Documentation/devicetree/bindings/video/display-timing.txt)
+  (Documentation/devicetree/bindings/display/display-timing.txt)
 - Video port for DPI input
 
 Example

Documentation/devicetree/bindings/panel/samsung,ld9040.txt → Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt

@@ -20,7 +20,7 @@ The device node can contain one 'port' child node with one child
 'endpoint' node, according to the bindings defined in [3]. This
 node should describe panel's video bus.
 
-[1]: Documentation/devicetree/bindings/video/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/display-timing.txt
 [2]: Documentation/devicetree/bindings/spi/spi-bus.txt
 [3]: Documentation/devicetree/bindings/media/video-interfaces.txt
 

Documentation/devicetree/bindings/panel/samsung,s6e8aa0.txt → Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt

@@ -21,7 +21,7 @@ The device node can contain one 'port' child node with one child
 'endpoint' node, according to the bindings defined in [2]. This
 node should describe panel's video bus.
 
-[1]: Documentation/devicetree/bindings/video/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/display-timing.txt
 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:

Documentation/devicetree/bindings/video/rockchip-drm.txt → Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt

@@ -9,7 +9,7 @@ Required properties:
 - compatible: Should be "rockchip,display-subsystem"
 - ports: Should contain a list of phandles pointing to display interface port
   of vop devices. vop definitions as defined in
-  Documentation/devicetree/bindings/video/rockchip-vop.txt
+  Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
 
 example:
 

Documentation/devicetree/bindings/gpu/st,stih4xx.txt → Documentation/devicetree/bindings/display/st,stih4xx.txt

@@ -61,7 +61,7 @@ STMicroelectronics stih4xx platforms
   - reg-names: names of the mapped memory regions listed in regs property in
     the same order.
   - interrupts : HDMI interrupt number to the CPU.
-  - interrupt-names: name of the interrupts listed in interrupts property in
+  - interrupt-names: names of the interrupts listed in interrupts property in
     the same order
   - clocks: from common clock binding: handle hardware IP needed clocks, the
     number of clocks may depend of the SoC type.
@@ -95,7 +95,7 @@ sti-dvo:
   - clock-names: names of the clocks listed in clocks property in the same
     order.
   - pinctrl-0: pin control handle
-  - pinctrl-name: names of the pin control to use
+  - pinctrl-names: names of the pin control states to use
   - sti,panel: phandle of the panel connected to the DVO output
 
 sti-hqvdp:

Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt → Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt

@@ -184,7 +184,7 @@ of the following host1x client modules:
   - avdd-dsi-supply: phandle of a supply that powers the DSI controller
   - nvidia,mipi-calibrate: Should contain a phandle and a specifier specifying
     which pads are used by this DSI output and need to be calibrated. See also
-    ../mipi/nvidia,tegra114-mipi.txt.
+    ../display/tegra/nvidia,tegra114-mipi.txt.
 
   Optional properties:
   - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing

Documentation/devicetree/bindings/video/ti,dra7-dss.txt → Documentation/devicetree/bindings/display/ti/ti,dra7-dss.txt

 Texas Instruments DRA7x Display Subsystem
 =========================================
 
-See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
 description about OMAP Display Subsystem bindings.
 
 DSS Core

Documentation/devicetree/bindings/video/ti,omap2-dss.txt → Documentation/devicetree/bindings/display/ti/ti,omap2-dss.txt

 Texas Instruments OMAP2 Display Subsystem
 =========================================
 
-See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
 description about OMAP Display Subsystem bindings.
 
 DSS Core

Documentation/devicetree/bindings/video/ti,omap3-dss.txt → Documentation/devicetree/bindings/display/ti/ti,omap3-dss.txt

 Texas Instruments OMAP3 Display Subsystem
 =========================================
 
-See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
 description about OMAP Display Subsystem bindings.
 
 DSS Core

Documentation/devicetree/bindings/video/ti,omap4-dss.txt → Documentation/devicetree/bindings/display/ti/ti,omap4-dss.txt

 Texas Instruments OMAP4 Display Subsystem
 =========================================
 
-See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
 description about OMAP Display Subsystem bindings.
 
 DSS Core

Documentation/devicetree/bindings/video/ti,omap5-dss.txt → Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt

 Texas Instruments OMAP5 Display Subsystem
 =========================================
 
-See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
 description about OMAP Display Subsystem bindings.
 
 DSS Core

Documentation/devicetree/bindings/drm/tilcdc/panel.txt → Documentation/devicetree/bindings/display/tilcdc/panel.txt

@@ -15,7 +15,7 @@ Required properties:
  - display-timings: typical videomode of lcd panel.  Multiple video modes
    can be listed if the panel supports multiple timings, but the 'native-mode'
    should be the preferred/default resolution.  Refer to
-   Documentation/devicetree/bindings/video/display-timing.txt for display
+   Documentation/devicetree/bindings/display/display-timing.txt for display
    timing binding details.
 
 Optional properties:

Documentation/devicetree/bindings/fpga/altera-socfpga-fpga-mgr.txt

@@ -9,7 +9,7 @@ Required properties:
 
 Example:
 
-	hps_0_fpgamgr: fpgamgr@0xff706000 {
+	hps_0_fpgamgr: fpgamgr@ff706000 {
 		compatible = "altr,socfpga-fpga-mgr";
 		reg = <0xFF706000 0x1000
 		       0xFFB90000 0x1000>;

Documentation/devicetree/bindings/hwmon/ina209.txt

-ina209 properties
-
-Required properties:
-- compatible: Must be "ti,ina209"
-- reg: I2C address
-
-Optional properties:
-
-- shunt-resistor
-	Shunt resistor value in micro-Ohm
-
-Example:
-
-temp-sensor@4c {
-	compatible = "ti,ina209";
-	reg = <0x4c>;
-	shunt-resistor = <5000>;
-};

Documentation/devicetree/bindings/hwmon/ina2xx.txt

@@ -2,6 +2,7 @@ ina2xx properties
 
 Required properties:
 - compatible: Must be one of the following:
+	- "ti,ina209" for ina209
 	- "ti,ina219" for ina219
 	- "ti,ina220" for ina220
 	- "ti,ina226" for ina226

Documentation/devicetree/bindings/input/ads7846.txt

@@ -65,6 +65,7 @@ Optional properties:
 	pendown-gpio			GPIO handle describing the pin the !PENIRQ
 					line is connected to.
 	wakeup-source			use any event on touchscreen as wakeup event.
+					(Legacy property support: "linux,wakeup")
 
 
 Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC::
@@ -86,6 +87,6 @@ Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC::
 			ti,x-plate-ohms = /bits/ 16 <40>;
 			ti,pressure-max = /bits/ 16 <255>;
 
-			linux,wakeup;
+			wakeup-source;
 		};
 	};

Documentation/devicetree/bindings/input/gpio-keys-polled.txt

@@ -28,6 +28,7 @@ Optional subnode-properties:
 	- debounce-interval: Debouncing interval time in milliseconds.
 	  If not specified defaults to 5.
 	- wakeup-source: Boolean, button can wake-up the system.
+			 (Legacy property supported: "gpio-key,wakeup")
 
 Example nodes:
 

Documentation/devicetree/bindings/input/gpio-keys.txt

@@ -24,6 +24,7 @@ Optional subnode-properties:
 	- debounce-interval: Debouncing interval time in milliseconds.
 	  If not specified defaults to 5.
 	- wakeup-source: Boolean, button can wake-up the system.
+			 (Legacy property supported: "gpio-key,wakeup")
 	- linux,can-disable: Boolean, indicates that button is connected
 	  to dedicated (not shared) interrupt which can be disabled to
 	  suppress events from the button.

Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt

@@ -20,6 +20,7 @@ Required Properties:
 Optional Properties:
 - linux,no-autorepeat:	do no enable autorepeat feature.
 - wakeup-source:	use any event on keypad as wakeup event.
+			(Legacy property supported: "linux,wakeup")
 - debounce-delay-ms:	debounce interval in milliseconds
 - col-scan-delay-us:	delay, measured in microseconds, that is needed
 			before we can scan keypad after activating column gpio

Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt

@@ -29,7 +29,8 @@ matrix-keyboard bindings:
 - nvidia,debounce-delay-ms: delay in milliseconds per row scan for debouncing
 - nvidia,repeat-delay-ms: delay in milliseconds before repeat starts
 - nvidia,ghost-filter: enable ghost filtering for this device
-- nvidia,wakeup-source: configure keyboard as a wakeup source for suspend/resume
+- wakeup-source: configure keyboard as a wakeup source for suspend/resume
+		 (Legacy property supported: "nvidia,wakeup-source")
 
 Example:
 

Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt

@@ -37,6 +37,7 @@ PROPERTIES
 	Usage: optional
 	Value type: <bool>
 	Definition: use any event on keypad as wakeup event.
+		    (Legacy property supported: "linux,keypad-wakeup")
 
 - keypad,num-rows:
 	Usage: required

Documentation/devicetree/bindings/input/samsung-keypad.txt

@@ -38,6 +38,7 @@ Required Board Specific Properties:
 
 Optional Properties:
 - wakeup-source: use any event on keypad as wakeup event.
+		 (Legacy property supported: "linux,input-wakeup")
 
 Optional Properties specific to linux:
 - linux,keypad-no-autorepeat: do no enable autorepeat feature.
@@ -51,7 +52,7 @@ Example:
 		samsung,keypad-num-rows = <2>;
 		samsung,keypad-num-columns = <8>;
 		linux,input-no-autorepeat;
-		linux,input-wakeup;
+		wakeup-source;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&keypad_rows &keypad_columns>;

Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt

@@ -15,7 +15,7 @@ Required properties:
 
 The HLCDC IP exposes two subdevices:
  - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
- - a Display Controller: see ../drm/atmel-hlcdc-dc.txt
+ - a Display Controller: see ../display/atmel-hlcdc-dc.txt
 
 Example:
 

Documentation/devicetree/bindings/mfd/sky81452.txt

@@ -6,7 +6,7 @@ Required properties:
 
 Required child nodes:
 - backlight	: container node for backlight following the binding
-		in video/backlight/sky81452-backlight.txt
+		in leds/backlight/sky81452-backlight.txt
 - regulator	: container node for regulators following the binding
 		in regulator/sky81452-regulator.txt
 

Documentation/devicetree/bindings/mfd/tc3589x.txt

@@ -56,6 +56,7 @@ Optional nodes:
    bindings/input/matrix-keymap.txt
  - linux,no-autorepeat: do no enable autorepeat feature.
  - wakeup-source: use any event on keypad as wakeup event.
+		  (Legacy property supported: "linux,wakeup")
 
 Example:
 

Documentation/devicetree/bindings/mmc/mmc.txt

@@ -68,7 +68,8 @@ polarity is in effect.
 
 Optional SDIO properties:
 - keep-power-in-suspend: Preserves card power during a suspend/resume cycle
-- enable-sdio-wakeup: Enables wake up of host system on SDIO IRQ assertion
+- wakeup-source: Enables wake up of host system on SDIO IRQ assertion
+		 (Legacy property supported: "enable-sdio-wakeup")
 
 
 MMC power sequences:
@@ -118,7 +119,7 @@ sdhci@ab000000 {
 	wp-gpios = <&gpio 70 0>;
 	max-frequency = <50000000>;
 	keep-power-in-suspend;
-	enable-sdio-wakeup;
+	wakeup-source;
 	mmc-pwrseq = <&sdhci0_pwrseq>
 }
 

Documentation/devicetree/bindings/pci/pci.txt

 PCI bus bridges have standardized Device Tree bindings:
 
 PCI Bus Binding to: IEEE Std 1275-1994
-http://www.openfirmware.org/ofwg/bindings/pci/pci2_1.pdf
+http://www.firmware.org/1275/bindings/pci/pci2_1.pdf
 
 And for the interrupt mapping part:
 
 Open Firmware Recommended Practice: Interrupt Mapping
-http://www.openfirmware.org/1275/practice/imap/imap0_9d.pdf
+http://www.firmware.org/1275/practice/imap/imap0_9d.pdf
 
 Additionally to the properties specified in the above standards a host bridge
 driver implementation may support the following properties:

Documentation/devicetree/bindings/power/wakeup-source.txt

+Specifying wakeup capability for devices
+============================================
+
+Any device nodes
+----------------
+Nodes that describe devices which has wakeup capability must contain an
+"wakeup-source" boolean property.
+
+Also, if device is marked as a wakeup source, then all the primary
+interrupt(s) can be used as wakeup interrupt(s).
+
+However if the devices have dedicated interrupt as the wakeup source
+then they need to specify/identify the same using device specific
+interrupt name. In such cases only that interrupt can be used as wakeup
+interrupt.
+
+List of legacy properties and respective binding document
+---------------------------------------------------------
+
+1. "enable-sdio-wakeup"		Documentation/devicetree/bindings/mmc/mmc.txt
+2. "gpio-key,wakeup"		Documentation/devicetree/bindings/input/gpio-keys{,-polled}.txt
+3. "has-tpo"			Documentation/devicetree/bindings/rtc/rtc-opal.txt
+4. "isil,irq2-can-wakeup-machine" Documentation/devicetree/bindings/rtc/isil,isl12057.txt
+5. "linux,wakeup"		Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+				Documentation/devicetree/bindings/mfd/tc3589x.txt
+				Documentation/devicetree/bindings/input/ads7846.txt
+6. "linux,keypad-wakeup"	Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
+7. "linux,input-wakeup"		Documentation/devicetree/bindings/input/samsung-keypad.txt
+8. "nvidia,wakeup-source"	Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
+
+Examples
+--------
+
+1. With "wakeup" interrupt name
+
+	device@10000 {
+		compatible	= "vendor,device-id";
+		reg		= <0x10000 0x1000>;
+		interrupts	= <0 19 4>, <0 21 4>, <0 22 4>;
+		interrupt-names	= "ack", "err", "wakeup";
+		wakeup-source;
+	};
+
+2. Without "wakeup" interrupt name
+
+	embedded-controller {
+		compatible = "google,cros-ec-i2c";
+		reg = <0x1e>;
+		interrupts = <6 0>;
+		interrupt-parent = <&gpx1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_irq>;
+		wakeup-source;
+	};
+
+3. Without interrupts
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			debounce_interval = <50>;
+			wakeup-source;
+			linux,code = <116>;
+			label = "POWER";
+			gpios = <&iofpga_gpio0 0 0x4>;
+		};
+		[....]
+	};

Documentation/devicetree/bindings/rtc/isil,isl12057.txt

@@ -5,7 +5,7 @@ consisting of a compatible field, an address and possibly an interrupt
 line).
 
 Nonetheless, it also supports an option boolean property
-("isil,irq2-can-wakeup-machine") to handle the specific use-case found
+("wakeup-source") to handle the specific use-case found
 on at least three in-tree users of the chip (NETGEAR ReadyNAS 102, 104
 and 2120 ARM-based NAS); On those devices, the IRQ#2 pin of the chip
 (associated with the alarm supported by the driver) is not connected
@@ -22,9 +22,9 @@ Required properties supported by the device:
 
 Optional properties:
 
- - "isil,irq2-can-wakeup-machine": mark the chip as a wakeup source,
-   independently of the availability of an IRQ line connected to the
-   SoC.
+ - "wakeup-source": mark the chip as a wakeup source, independently of
+    the availability of an IRQ line connected to the SoC.
+    (Legacy property supported: "isil,irq2-can-wakeup-machine")
 
  - "interrupt-parent", "interrupts": for passing the interrupt line
    of the SoC connected to IRQ#2 of the RTC chip.
@@ -74,5 +74,5 @@ PMIC, allowing the device to be started based on configured alarm:
 	isl12057: isl12057@68 {
 		compatible = "isil,isl12057";
 		reg = <0x68>;
-		isil,irq2-can-wakeup-machine;
+		wakeup-source;
 	};

Documentation/devicetree/bindings/rtc/rtc-opal.txt

@@ -5,12 +5,13 @@ Required properties:
 - comapatible: Should be "ibm,opal-rtc"
 
 Optional properties:
-- has-tpo: Decides if the wakeup is supported or not.
+- wakeup-source: Decides if the wakeup is supported or not
+		 (Legacy property supported: "has-tpo")
 
 Example:
 	rtc {
 		compatible = "ibm,opal-rtc";
-		has-tpo;
+		wakeup-source;
 		phandle = <0x10000029>;
 		linux,phandle = <0x10000029>;
 	};

Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt

@@ -10,7 +10,6 @@ Required properties:
 				mvrl,pxa168-ssp
 				mrvl,pxa910-ssp
 				mrvl,ce4100-ssp
-				mrvl,lpss-ssp
 
 	- reg:		The memory base
 	- dmas:		Two dma phandles, one for rx, one for tx

Documentation/devicetree/bindings/usb/samsung-usbphy.txt

-SAMSUNG USB-PHY controllers
-
-** Samsung's usb 2.0 phy transceiver
-
-The Samsung's usb 2.0 phy transceiver is used for controlling
-usb 2.0 phy for s3c-hsotg as well as ehci-s5p and ohci-exynos
-usb controllers across Samsung SOCs.
-TODO: Adding the PHY binding with controller(s) according to the under
-development generic PHY driver.
-
-Required properties:
-
-Exynos4210:
-- compatible : should be "samsung,exynos4210-usb2phy"
-- reg : base physical address of the phy registers and length of memory mapped
-	region.
-- clocks: Clock IDs array as required by the controller.
-- clock-names: names of clock correseponding IDs clock property as requested
-	       by the controller driver.
-
-Exynos5250:
-- compatible : should be "samsung,exynos5250-usb2phy"
-- reg : base physical address of the phy registers and length of memory mapped
-	region.
-
-Optional properties:
-- #address-cells: should be '1' when usbphy node has a child node with 'reg'
-		  property.
-- #size-cells: should be '1' when usbphy node has a child node with 'reg'
-	       property.
-- ranges: allows valid translation between child's address space and parent's
-	  address space.
-
-- The child node 'usbphy-sys' to the node 'usbphy' is for the system controller
-  interface for usb-phy. It should provide the following information required by
-  usb-phy controller to control phy.
-  - reg : base physical address of PHY_CONTROL registers.
-	  The size of this register is the total sum of size of all PHY_CONTROL
-	  registers that the SoC has. For example, the size will be
-	  '0x4' in case we have only one PHY_CONTROL register (e.g.
-	  OTHERS register in S3C64XX or USB_PHY_CONTROL register in S5PV210)
-	  and, '0x8' in case we have two PHY_CONTROL registers (e.g.
-	  USBDEVICE_PHY_CONTROL and USBHOST_PHY_CONTROL registers in exynos4x).
-	  and so on.
-
-Example:
- - Exynos4210
-
-	usbphy@125B0000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "samsung,exynos4210-usb2phy";
-		reg = <0x125B0000 0x100>;
-		ranges;
-
-		clocks = <&clock 2>, <&clock 305>;
-		clock-names = "xusbxti", "otg";
-
-		usbphy-sys {
-			/* USB device and host PHY_CONTROL registers */
-			reg = <0x10020704 0x8>;
-		};
-	};
-
-
-** Samsung's usb 3.0 phy transceiver
-
-Starting exynso5250, Samsung's SoC have usb 3.0 phy transceiver
-which is used for controlling usb 3.0 phy for dwc3-exynos usb 3.0
-controllers across Samsung SOCs.
-
-Required properties:
-
-Exynos5250:
-- compatible : should be "samsung,exynos5250-usb3phy"
-- reg : base physical address of the phy registers and length of memory mapped
-	region.
-- clocks: Clock IDs array as required by the controller.
-- clock-names: names of clocks correseponding to IDs in the clock property
-	       as requested by the controller driver.
-
-Optional properties:
-- #address-cells: should be '1' when usbphy node has a child node with 'reg'
-		  property.
-- #size-cells: should be '1' when usbphy node has a child node with 'reg'
-	       property.
-- ranges: allows valid translation between child's address space and parent's
-	  address space.
-
-- The child node 'usbphy-sys' to the node 'usbphy' is for the system controller
-  interface for usb-phy. It should provide the following information required by
-  usb-phy controller to control phy.
-  - reg : base physical address of PHY_CONTROL registers.
-	  The size of this register is the total sum of size of all PHY_CONTROL
-	  registers that the SoC has. For example, the size will be
-	  '0x4' in case we have only one PHY_CONTROL register (e.g.
-	  OTHERS register in S3C64XX or USB_PHY_CONTROL register in S5PV210)
-	  and, '0x8' in case we have two PHY_CONTROL registers (e.g.
-	  USBDEVICE_PHY_CONTROL and USBHOST_PHY_CONTROL registers in exynos4x).
-	  and so on.
-
-Example:
-	usbphy@12100000 {
-		compatible = "samsung,exynos5250-usb3phy";
-		reg = <0x12100000 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clocks = <&clock 1>, <&clock 286>;
-		clock-names = "ext_xtal", "usbdrd30";
-
-		usbphy-sys {
-			/* USB device and host PHY_CONTROL registers */
-			reg = <0x10040704 0x8>;
-		};
-	};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -51,6 +51,7 @@ cirrus	Cirrus Logic, Inc.
 cloudengines	Cloud Engines, Inc.
 cnm	Chips&Media, Inc.
 cnxt	Conexant Systems, Inc.
+compulab	CompuLab Ltd.
 cortina	Cortina Systems, Inc.
 cosmic	Cosmic Circuits
 crystalfontz	Crystalfontz America, Inc.
@@ -196,6 +197,7 @@ seagate	Seagate Technology PLC
 semtech	Semtech Corporation
 sgx	SGX Sensortech
 sharp	Sharp Corporation
+sigma	Sigma Designs, Inc.
 sil	Silicon Image
 silabs	Silicon Laboratories
 siliconmitus	Silicon Mitus, Inc.

MAINTAINERS

@@ -3616,7 +3616,7 @@ S:	Maintained
 F:	drivers/gpu/drm/drm_panel.c
 F:	drivers/gpu/drm/panel/
 F:	include/drm/drm_panel.h
-F:	Documentation/devicetree/bindings/panel/
+F:	Documentation/devicetree/bindings/display/panel/
 
 INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
 M:	Daniel Vetter <daniel.vetter@intel.com>
@@ -3655,15 +3655,15 @@ M:	Alison Wang <alison.wang@freescale.com>
 L:	dri-devel@lists.freedesktop.org
 S:	Supported
 F:	drivers/gpu/drm/fsl-dcu/
-F:	Documentation/devicetree/bindings/video/fsl,dcu.txt
-F:	Documentation/devicetree/bindings/panel/nec,nl4827hc19_05b.txt
+F:	Documentation/devicetree/bindings/display/fsl,dcu.txt
+F:	Documentation/devicetree/bindings/display/panel/nec,nl4827hc19_05b.txt
 
 DRM DRIVERS FOR FREESCALE IMX
 M:	Philipp Zabel <p.zabel@pengutronix.de>
 L:	dri-devel@lists.freedesktop.org
 S:	Maintained
 F:	drivers/gpu/drm/imx/
-F:	Documentation/devicetree/bindings/drm/imx/
+F:	Documentation/devicetree/bindings/display/imx/
 
 DRM DRIVERS FOR GMA500 (Poulsbo, Moorestown and derivative chipsets)
 M:	Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
@@ -3684,7 +3684,7 @@ F:	drivers/gpu/drm/tegra/
 F:	drivers/gpu/host1x/
 F:	include/linux/host1x.h
 F:	include/uapi/drm/tegra_drm.h
-F:	Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
+F:	Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
 
 DRM DRIVERS FOR RENESAS
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
@@ -3701,7 +3701,7 @@ M:	Mark Yao <mark.yao@rock-chips.com>
 L:	dri-devel@lists.freedesktop.org
 S:	Maintained
 F:	drivers/gpu/drm/rockchip/
-F:	Documentation/devicetree/bindings/video/rockchip*
+F:	Documentation/devicetree/bindings/display/rockchip*
 
 DRM DRIVERS FOR STI
 M:	Benjamin Gaignard <benjamin.gaignard@linaro.org>
@@ -3710,7 +3710,7 @@ L:	dri-devel@lists.freedesktop.org
 T:	git http://git.linaro.org/people/benjamin.gaignard/kernel.git
 S:	Maintained
 F:	drivers/gpu/drm/sti
-F:	Documentation/devicetree/bindings/gpu/st,stih4xx.txt
+F:	Documentation/devicetree/bindings/display/st,stih4xx.txt
 
 DSBR100 USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
@@ -4403,7 +4403,6 @@ Q:	http://patchwork.kernel.org/project/linux-fbdev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev.git
 S:	Maintained
 F:	Documentation/fb/
-F:	Documentation/devicetree/bindings/fb/
 F:	drivers/video/
 F:	include/video/
 F:	include/linux/fb.h
@@ -6967,6 +6966,7 @@ S:	Supported
 F:	arch/metag/
 F:	Documentation/metag/
 F:	Documentation/devicetree/bindings/metag/
+F:	Documentation/devicetree/bindings/interrupt-controller/img,*
 F:	drivers/clocksource/metag_generic.c
 F:	drivers/irqchip/irq-metag.c
 F:	drivers/irqchip/irq-metag-ext.c
@@ -9634,7 +9634,7 @@ SIMPLEFB FB DRIVER
 M:	Hans de Goede <hdegoede@redhat.com>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/video/simple-framebuffer.txt
+F:	Documentation/devicetree/bindings/display/simple-framebuffer.txt
 F:	drivers/video/fbdev/simplefb.c
 F:	include/linux/platform_data/simplefb.h
 
@@ -10265,6 +10265,7 @@ L:	linux-snps-arc@lists.infraded.org
 S:	Supported
 F:	arch/arc/
 F:	Documentation/devicetree/bindings/arc/*
+F:	Documentation/devicetree/bindings/interrupt-controller/snps,arc*
 F:	drivers/tty/serial/arc_uart.c
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc.git
 

arch/arc/Makefile

@@ -121,7 +121,7 @@ $(boot_targets): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
 
 dtbs: scripts
-	$(Q)$(MAKE) $(build)=$(boot)/dts dtbs
+	$(Q)$(MAKE) $(build)=$(boot)/dts
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)

arch/arc/boot/dts/Makefile

@@ -6,10 +6,12 @@ ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),"")
 endif
 
 obj-y   += $(builtindtb-y).dtb.o
-targets += $(builtindtb-y).dtb
+dtb-y := $(builtindtb-y).dtb
 
 .SECONDARY: $(obj)/$(builtindtb-y).dtb.S
 
-dtbs:  $(addprefix  $(obj)/, $(builtindtb-y).dtb)
+dtstree		:= $(srctree)/$(src)
+dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
 
+always := $(dtb-y)
 clean-files := *.dtb  *.dtb.S

arch/arm/boot/dts/Makefile

@@ -740,5 +740,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
 dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
 endif
 
+dtstree		:= $(srctree)/$(src)
+dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
+
 always		:= $(dtb-y)
 clean-files	:= *.dtb

arch/arm64/boot/dts/Makefile

@@ -14,3 +14,9 @@ dts-dirs += sprd
 dts-dirs += xilinx
 
 subdir-y	:= $(dts-dirs)
+
+dtstree		:= $(srctree)/$(src)
+
+dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(foreach d,$(dts-dirs), $(wildcard $(dtstree)/$(d)/*.dts)))
+
+always		:= $(dtb-y)

arch/h8300/boot/dts/Makefile

@@ -8,5 +8,8 @@ dtb-$(CONFIG_H8300H_SIM) := h8300h_sim.dtb
 dtb-$(CONFIG_H8S_SIM) := h8s_sim.dtb
 dtb-$(CONFIG_H8S_EDOSK2674) := edosk2674.dtb
 
+dtstree		:= $(srctree)/$(src)
+dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
+
 always	    := $(dtb-y)
 clean-files := *.dtb.S *.dtb

arch/metag/Makefile

@@ -72,7 +72,7 @@ $(boot_targets): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
 
 dtbs: scripts
-	$(Q)$(MAKE) $(build)=$(boot)/dts dtbs
+	$(Q)$(MAKE) $(build)=$(boot)/dts
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)

arch/metag/boot/dts/Makefile

@@ -12,11 +12,10 @@ endif
 dtb-$(CONFIG_METAG_BUILTIN_DTB)	+= $(builtindtb-y).dtb
 obj-$(CONFIG_METAG_BUILTIN_DTB)	+= $(builtindtb-y).dtb.o
 
-targets	+= dtbs
-targets	+= $(dtb-y)
+dtstree		:= $(srctree)/$(src)
+dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
 
 .SECONDARY: $(obj)/$(builtindtb-y).dtb.S
 
-dtbs: $(addprefix $(obj)/, $(dtb-y))
-
+always += $(dtb-y)
 clean-files += *.dtb *.dtb.S

arch/mips/boot/dts/Makefile

@@ -9,6 +9,9 @@ dts-dirs	+= ralink
 
 obj-y		:= $(addsuffix /, $(dts-dirs))
 
+dtstree		:= $(srctree)/$(src)
+dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(foreach d,$(dts-dirs), $(wildcard $(dtstree)/$(d)/*.dts)))
+
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
 clean-files	:= *.dtb *.dtb.S

arch/xtensa/Makefile

@@ -101,6 +101,10 @@ zImage: vmlinux
 %.dtb:
 	$(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
 
+dtbs: scripts
+	$(Q)$(MAKE) $(build)=$(boot)/dts
+
 define archhelp
   @echo '* zImage      - Compressed kernel image (arch/xtensa/boot/images/zImage.*)'
+  @echo '  dtbs        - Build device tree blobs for enabled boards'
 endef

arch/xtensa/boot/dts/Makefile

@@ -12,4 +12,9 @@ ifneq ($(CONFIG_BUILTIN_DTB),"")
 obj-$(CONFIG_OF) += $(BUILTIN_DTB)
 endif
 
-clean-files := *.dtb.S
+dtstree := $(srctree)/$(src)
+dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
+
+always += $(dtb-y)
+clean-files += *.dtb *.dtb.S
+

drivers/of/Kconfig

@@ -23,6 +23,16 @@ config OF_UNITTEST
 
 	  If unsure, say N here, but this option is safe to enable.
 
+config OF_ALL_DTBS
+	bool "Build all Device Tree Blobs"
+	depends on COMPILE_TEST
+	select DTC
+	help
+	  This option builds all possible Device Tree Blobs (DTBs) for the
+	  current architecture.
+
+	  If unsure, say N here, but this option is safe to enable.
+
 config OF_FLATTREE
 	bool
 	select DTC

drivers/of/address.c

@@ -330,6 +330,12 @@ int of_pci_range_to_resource(struct of_pci_range *range,
 		}
 		res->start = port;
 	} else {
+		if ((sizeof(resource_size_t) < 8) &&
+		    upper_32_bits(range->cpu_addr)) {
+			err = -EINVAL;
+			goto invalid_range;
+		}
+
 		res->start = range->cpu_addr;
 	}
 	res->end = res->start + range->size - 1;

drivers/of/base.c

@@ -375,10 +375,7 @@ bool __weak arch_find_n_match_cpu_physical_id(struct device_node *cpun,
 					   cpu, thread))
 		return true;
 
-	if (__of_find_n_match_cpu_property(cpun, "reg", cpu, thread))
-		return true;
-
-	return false;
+	return __of_find_n_match_cpu_property(cpun, "reg", cpu, thread);
 }
 
 /**

drivers/of/fdt.c

@@ -184,7 +184,7 @@ static void * unflatten_dt_node(const void *blob,
 	struct property *pp, **prev_pp = NULL;
 	const char *pathp;
 	unsigned int l, allocl;
-	static int depth = 0;
+	static int depth;
 	int old_depth;
 	int offset;
 	int has_name = 0;
@@ -813,20 +813,24 @@ static int __init early_init_dt_scan_chosen_serial(void)
 	if (!p || !l)
 		return -ENOENT;
 
+	/* Remove console options if present */
+	l = strchrnul(p, ':') - p;
+
 	/* Get the node specified by stdout-path */
-	offset = fdt_path_offset(fdt, p);
+	offset = fdt_path_offset_namelen(fdt, p, l);
 	if (offset < 0)
 		return -ENODEV;
 
 	while (match->compatible[0]) {
-		unsigned long addr;
+		u64 addr;
+
 		if (fdt_node_check_compatible(fdt, offset, match->compatible)) {
 			match++;
 			continue;
 		}
 
 		addr = fdt_translate_address(fdt, offset);
-		if (!addr)
+		if (addr == OF_BAD_ADDR)
 			return -ENXIO;
 
 		of_setup_earlycon(addr, match->data);

drivers/of/irq.c

@@ -53,7 +53,7 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
  * Returns a pointer to the interrupt parent node, or NULL if the interrupt
  * parent could not be determined.
  */
-struct device_node *of_irq_find_parent(struct device_node *child)
+static struct device_node *of_irq_find_parent(struct device_node *child)
 {
 	struct device_node *p;
 	const __be32 *parp;
@@ -501,10 +501,12 @@ void __init of_irq_init(const struct of_device_id *matches)
 		 * pointer, interrupt-parent device_node etc.
 		 */
 		desc = kzalloc(sizeof(*desc), GFP_KERNEL);
-		if (WARN_ON(!desc))
+		if (WARN_ON(!desc)) {
+			of_node_put(np);
 			goto err;
+		}
 
-		desc->dev = np;
+		desc->dev = of_node_get(np);
 		desc->interrupt_parent = of_irq_find_parent(np);
 		if (desc->interrupt_parent == np)
 			desc->interrupt_parent = NULL;
@@ -575,6 +577,7 @@ void __init of_irq_init(const struct of_device_id *matches)
 err:
 	list_for_each_entry_safe(desc, temp_desc, &intc_desc_list, list) {
 		list_del(&desc->list);
+		of_node_put(desc->dev);
 		kfree(desc);
 	}
 }

drivers/of/of_pci.c

@@ -249,8 +249,10 @@ int of_pci_get_host_bridge_resources(struct device_node *dev,
 		}
 
 		err = of_pci_range_to_resource(&range, dev, res);
-		if (err)
-			goto conversion_failed;
+		if (err) {
+			kfree(res);
+			continue;
+		}
 
 		if (resource_type(res) == IORESOURCE_IO) {
 			if (!io_base) {

drivers/of/of_reserved_mem.c

 /*
  * Device tree based initialization code for reserved memory.
  *
- * Copyright (c) 2013, The Linux Foundation. All Rights Reserved.
+ * Copyright (c) 2013, 2015 The Linux Foundation. All Rights Reserved.
  * Copyright (c) 2013,2014 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  * Author: Marek Szyprowski <m.szyprowski@samsung.com>
@@ -20,6 +20,7 @@
 #include <linux/mm.h>
 #include <linux/sizes.h>
 #include <linux/of_reserved_mem.h>
+#include <linux/sort.h>
 
 #define MAX_RESERVED_REGIONS	16
 static struct reserved_mem reserved_mem[MAX_RESERVED_REGIONS];
@@ -197,12 +198,52 @@ static int __init __reserved_mem_init_node(struct reserved_mem *rmem)
 	return -ENOENT;
 }
 
+static int __init __rmem_cmp(const void *a, const void *b)
+{
+	const struct reserved_mem *ra = a, *rb = b;
+
+	return ra->base - rb->base;
+}
+
+static void __init __rmem_check_for_overlap(void)
+{
+	int i;
+
+	if (reserved_mem_count < 2)
+		return;
+
+	sort(reserved_mem, reserved_mem_count, sizeof(reserved_mem[0]),
+	     __rmem_cmp, NULL);
+	for (i = 0; i < reserved_mem_count - 1; i++) {
+		struct reserved_mem *this, *next;
+
+		this = &reserved_mem[i];
+		next = &reserved_mem[i + 1];
+		if (!(this->base && next->base))
+			continue;
+		if (this->base + this->size > next->base) {
+			phys_addr_t this_end, next_end;
+
+			this_end = this->base + this->size;
+			next_end = next->base + next->size;
+			WARN(1,
+			     "Reserved memory: OVERLAP DETECTED!\n%s (%pa--%pa) overlaps with %s (%pa--%pa)\n",
+			     this->name, &this->base, &this_end,
+			     next->name, &next->base, &next_end);
+		}
+	}
+}
+
 /**
  * fdt_init_reserved_mem - allocate and init all saved reserved memory regions
  */
 void __init fdt_init_reserved_mem(void)
 {
 	int i;
+
+	/* check for overlapping reserved regions */
+	__rmem_check_for_overlap();
+
 	for (i = 0; i < reserved_mem_count; i++) {
 		struct reserved_mem *rmem = &reserved_mem[i];
 		unsigned long node = rmem->fdt_node;

drivers/of/overlay.c

@@ -149,6 +149,7 @@ static int of_overlay_apply_one(struct of_overlay *ov,
 			pr_err("%s: Failed to apply single node @%s/%s\n",
 					__func__, target->full_name,
 					child->name);
+			of_node_put(child);
 			return ret;
 		}
 	}
@@ -417,9 +418,11 @@ static int overlay_subtree_check(struct device_node *tree,
 		return 1;
 
 	for_each_child_of_node(tree, child) {
-		if (overlay_subtree_check(child, dn))
+		if (overlay_subtree_check(child, dn)) {
+			of_node_put(child);
 			return 1;
 		}
+	}
 
 	return 0;
 }

drivers/of/platform.c

@@ -405,9 +405,11 @@ int of_platform_bus_probe(struct device_node *root,
 		if (!of_match_node(matches, child))
 			continue;
 		rc = of_platform_bus_create(child, matches, NULL, parent, false);
-		if (rc)
+		if (rc) {
+			of_node_put(child);
 			break;
 		}
+	}
 
 	of_node_put(root);
 	return rc;
@@ -447,9 +449,11 @@ int of_platform_populate(struct device_node *root,
 
 	for_each_child_of_node(root, child) {
 		rc = of_platform_bus_create(child, matches, lookup, parent, true);
-		if (rc)
+		if (rc) {
+			of_node_put(child);
 			break;
 		}
+	}
 	of_node_set_flag(root, OF_POPULATED_BUS);
 
 	of_node_put(root);

drivers/of/unittest.c

@@ -205,16 +205,20 @@ static int __init of_unittest_check_node_linkage(struct device_node *np)
 		if (child->parent != np) {
 			pr_err("Child node %s links to wrong parent %s\n",
 				 child->name, np->name);
-			return -EINVAL;
+			rc = -EINVAL;
+			goto put_child;
 		}
 
 		rc = of_unittest_check_node_linkage(child);
 		if (rc < 0)
-			return rc;
+			goto put_child;
 		count += rc;
 	}
 
 	return count + 1;
+put_child:
+	of_node_put(child);
+	return rc;
 }
 
 static void __init of_unittest_check_tree_linkage(void)

include/linux/of_irq.h

@@ -51,6 +51,7 @@ extern struct irq_domain *of_msi_get_domain(struct device *dev,
 					    enum irq_domain_bus_token token);
 extern struct irq_domain *of_msi_map_get_device_domain(struct device *dev,
 						       u32 rid);
+extern void of_msi_configure(struct device *dev, struct device_node *np);
 #else
 static inline int of_irq_count(struct device_node *dev)
 {
@@ -80,31 +81,27 @@ static inline struct irq_domain *of_msi_map_get_device_domain(struct device *dev
 {
 	return NULL;
 }
+static inline void of_msi_configure(struct device *dev, struct device_node *np)
+{
+}
 #endif
 
-#if defined(CONFIG_OF)
+#if defined(CONFIG_OF_IRQ) || defined(CONFIG_SPARC)
 /*
  * irq_of_parse_and_map() is used by all OF enabled platforms; but SPARC
  * implements it differently.  However, the prototype is the same for all,
  * so declare it here regardless of the CONFIG_OF_IRQ setting.
  */
 extern unsigned int irq_of_parse_and_map(struct device_node *node, int index);
-extern struct device_node *of_irq_find_parent(struct device_node *child);
-extern void of_msi_configure(struct device *dev, struct device_node *np);
 u32 of_msi_map_rid(struct device *dev, struct device_node *msi_np, u32 rid_in);
 
-#else /* !CONFIG_OF */
+#else /* !CONFIG_OF && !CONFIG_SPARC */
 static inline unsigned int irq_of_parse_and_map(struct device_node *dev,
 						int index)
 {
 	return 0;
 }
 
-static inline void *of_irq_find_parent(struct device_node *child)
-{
-	return NULL;
-}
-
 static inline u32 of_msi_map_rid(struct device *dev,
 				 struct device_node *msi_np, u32 rid_in)
 {