Merge branch 'omap/cleanup2' into next/clk

Dependency for omap/am33xx-clk branch

arch/arm/mach-omap1/board-ams-delta.c

@@ -37,12 +37,12 @@
 #include <plat/board-ams-delta.h>
 #include <plat/keypad.h>
 #include <plat/mux.h>
-#include <plat/usb.h>
 #include <plat/board.h>
 
 #include <mach/hardware.h>
 #include <mach/ams-delta-fiq.h>
 #include <mach/camera.h>
+#include <mach/usb.h>
 
 #include "iomap.h"
 #include "common.h"

arch/arm/mach-omap1/board-generic.c

@@ -23,8 +23,10 @@
 #include <asm/mach/map.h>
 
 #include <plat/mux.h>
-#include <plat/usb.h>
 #include <plat/board.h>
+
+#include <mach/usb.h>
+
 #include "common.h"
 
 /* assume no Mini-AB port */

arch/arm/mach-omap1/board-h2.c

@@ -40,11 +40,11 @@
 #include <plat/dma.h>
 #include <plat/tc.h>
 #include <plat/irda.h>
-#include <plat/usb.h>
 #include <plat/keypad.h>
 #include <plat/flash.h>
 
 #include <mach/hardware.h>
+#include <mach/usb.h>
 
 #include "common.h"
 #include "board-h2.h"

arch/arm/mach-omap1/board-h3.c

@@ -40,13 +40,13 @@
 
 #include <plat/mux.h>
 #include <plat/tc.h>
-#include <plat/usb.h>
 #include <plat/keypad.h>
 #include <plat/dma.h>
 #include <plat/flash.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/usb.h>
 
 #include "common.h"
 #include "board-h3.h"

arch/arm/mach-omap1/board-htcherald.c

@@ -44,10 +44,10 @@
 #include <plat/omap7xx.h>
 #include <plat/board.h>
 #include <plat/keypad.h>
-#include <plat/usb.h>
 #include <plat/mmc.h>
 
 #include <mach/irqs.h>
+#include <mach/usb.h>
 
 #include "common.h"
 

arch/arm/mach-omap1/board-innovator.c

@@ -35,11 +35,11 @@
 #include <plat/flash.h>
 #include <plat/fpga.h>
 #include <plat/tc.h>
-#include <plat/usb.h>
 #include <plat/keypad.h>
 #include <plat/mmc.h>
 
 #include <mach/hardware.h>
+#include <mach/usb.h>
 
 #include "iomap.h"
 #include "common.h"

arch/arm/mach-omap1/board-nokia770.c

@@ -26,7 +26,6 @@
 #include <asm/mach/map.h>
 
 #include <plat/mux.h>
-#include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/lcd_mipid.h>
@@ -34,6 +33,7 @@
 #include <plat/clock.h>
 
 #include <mach/hardware.h>
+#include <mach/usb.h>
 
 #include "common.h"
 

arch/arm/mach-omap1/board-osk.c

@@ -45,11 +45,11 @@
 #include <asm/mach/map.h>
 
 #include <plat/flash.h>
-#include <plat/usb.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
 
 #include <mach/hardware.h>
+#include <mach/usb.h>
 
 #include "common.h"
 

arch/arm/mach-omap1/board-palmte.c

@@ -35,7 +35,6 @@
 
 #include <plat/flash.h>
 #include <plat/mux.h>
-#include <plat/usb.h>
 #include <plat/tc.h>
 #include <plat/dma.h>
 #include <plat/board.h>
@@ -43,6 +42,7 @@
 #include <plat/keypad.h>
 
 #include <mach/hardware.h>
+#include <mach/usb.h>
 
 #include "common.h"
 

arch/arm/mach-omap1/board-palmtt.c

@@ -35,7 +35,6 @@
 #include <plat/led.h>
 #include <plat/flash.h>
 #include <plat/mux.h>
-#include <plat/usb.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
 #include <plat/board.h>
@@ -43,6 +42,7 @@
 #include <plat/keypad.h>
 
 #include <mach/hardware.h>
+#include <mach/usb.h>
 
 #include "common.h"
 

arch/arm/mach-omap1/board-palmz71.c

@@ -37,7 +37,6 @@
 
 #include <plat/flash.h>
 #include <plat/mux.h>
-#include <plat/usb.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
 #include <plat/board.h>
@@ -45,6 +44,7 @@
 #include <plat/keypad.h>
 
 #include <mach/hardware.h>
+#include <mach/usb.h>
 
 #include "common.h"
 

arch/arm/mach-omap1/board-sx1.c

@@ -37,13 +37,13 @@
 #include <plat/mux.h>
 #include <plat/dma.h>
 #include <plat/irda.h>
-#include <plat/usb.h>
 #include <plat/tc.h>
 #include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/board-sx1.h>
 
 #include <mach/hardware.h>
+#include <mach/usb.h>
 
 #include "common.h"
 

arch/arm/mach-omap1/board-voiceblue.c

@@ -35,9 +35,10 @@
 #include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
-#include <plat/usb.h>
+#include <plat/board.h>
 
 #include <mach/hardware.h>
+#include <mach/usb.h>
 
 #include "common.h"
 

arch/arm/mach-omap1/clock_data.c

@@ -25,10 +25,11 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/clkdev_omap.h>
+#include <plat/board.h>
 #include <plat/sram.h>	/* for omap_sram_reprogram_clock() */
-#include <plat/usb.h>   /* for OTG_BASE */
 
 #include <mach/hardware.h>
+#include <mach/usb.h>   /* for OTG_BASE */
 
 #include "iomap.h"
 #include "clock.h"

arch/arm/mach-omap1/include/mach/usb.h

+/*
+ * FIXME correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#ifdef	CONFIG_USB_GADGET_OMAP
+#define	is_usb0_device(config)	1
+#else
+#define	is_usb0_device(config)	0
+#endif
+
+struct omap_usb_config {
+	/* Configure drivers according to the connectors on your board:
+	 *  - "A" connector (rectagular)
+	 *	... for host/OHCI use, set "register_host".
+	 *  - "B" connector (squarish) or "Mini-B"
+	 *	... for device/gadget use, set "register_dev".
+	 *  - "Mini-AB" connector (very similar to Mini-B)
+	 *	... for OTG use as device OR host, initialize "otg"
+	 */
+	unsigned	register_host:1;
+	unsigned	register_dev:1;
+	u8		otg;	/* port number, 1-based:  usb1 == 2 */
+
+	u8		hmc_mode;
+
+	/* implicitly true if otg:  host supports remote wakeup? */
+	u8		rwc;
+
+	/* signaling pins used to talk to transceiver on usbN:
+	 *  0 == usbN unused
+	 *  2 == usb0-only, using internal transceiver
+	 *  3 == 3 wire bidirectional
+	 *  4 == 4 wire bidirectional
+	 *  6 == 6 wire unidirectional (or TLL)
+	 */
+	u8		pins[3];
+
+	struct platform_device *udc_device;
+	struct platform_device *ohci_device;
+	struct platform_device *otg_device;
+
+	u32 (*usb0_init)(unsigned nwires, unsigned is_device);
+	u32 (*usb1_init)(unsigned nwires);
+	u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
+
+	int (*ocpi_enable)(void);
+};
+
+void omap_otg_init(struct omap_usb_config *config);
+
+#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#define OMAP1_OTG_BASE			0xfffb0400
+#define OMAP1_UDC_BASE			0xfffb4000
+#define OMAP1_OHCI_BASE			0xfffba000
+
+#define OMAP2_OHCI_BASE			0x4805e000
+#define OMAP2_UDC_BASE			0x4805e200
+#define OMAP2_OTG_BASE			0x4805e300
+#define OTG_BASE			OMAP1_OTG_BASE
+#define UDC_BASE			OMAP1_UDC_BASE
+#define OMAP_OHCI_BASE			OMAP1_OHCI_BASE
+
+/*
+ * OTG and transceiver registers, for OMAPs starting with ARM926
+ */
+#define OTG_REV				(OTG_BASE + 0x00)
+#define OTG_SYSCON_1			(OTG_BASE + 0x04)
+#	define	 USB2_TRX_MODE(w)	(((w)>>24)&0x07)
+#	define	 USB1_TRX_MODE(w)	(((w)>>20)&0x07)
+#	define	 USB0_TRX_MODE(w)	(((w)>>16)&0x07)
+#	define	 OTG_IDLE_EN		(1 << 15)
+#	define	 HST_IDLE_EN		(1 << 14)
+#	define	 DEV_IDLE_EN		(1 << 13)
+#	define	 OTG_RESET_DONE		(1 << 2)
+#	define	 OTG_SOFT_RESET		(1 << 1)
+#define OTG_SYSCON_2			(OTG_BASE + 0x08)
+#	define	 OTG_EN			(1 << 31)
+#	define	 USBX_SYNCHRO		(1 << 30)
+#	define	 OTG_MST16		(1 << 29)
+#	define	 SRP_GPDATA		(1 << 28)
+#	define	 SRP_GPDVBUS		(1 << 27)
+#	define	 SRP_GPUVBUS(w)		(((w)>>24)&0x07)
+#	define	 A_WAIT_VRISE(w)	(((w)>>20)&0x07)
+#	define	 B_ASE_BRST(w)		(((w)>>16)&0x07)
+#	define	 SRP_DPW		(1 << 14)
+#	define	 SRP_DATA		(1 << 13)
+#	define	 SRP_VBUS		(1 << 12)
+#	define	 OTG_PADEN		(1 << 10)
+#	define	 HMC_PADEN		(1 << 9)
+#	define	 UHOST_EN		(1 << 8)
+#	define	 HMC_TLLSPEED		(1 << 7)
+#	define	 HMC_TLLATTACH		(1 << 6)
+#	define	 OTG_HMC(w)		(((w)>>0)&0x3f)
+#define OTG_CTRL			(OTG_BASE + 0x0c)
+#	define	 OTG_USB2_EN		(1 << 29)
+#	define	 OTG_USB2_DP		(1 << 28)
+#	define	 OTG_USB2_DM		(1 << 27)
+#	define	 OTG_USB1_EN		(1 << 26)
+#	define	 OTG_USB1_DP		(1 << 25)
+#	define	 OTG_USB1_DM		(1 << 24)
+#	define	 OTG_USB0_EN		(1 << 23)
+#	define	 OTG_USB0_DP		(1 << 22)
+#	define	 OTG_USB0_DM		(1 << 21)
+#	define	 OTG_ASESSVLD		(1 << 20)
+#	define	 OTG_BSESSEND		(1 << 19)
+#	define	 OTG_BSESSVLD		(1 << 18)
+#	define	 OTG_VBUSVLD		(1 << 17)
+#	define	 OTG_ID			(1 << 16)
+#	define	 OTG_DRIVER_SEL		(1 << 15)
+#	define	 OTG_A_SETB_HNPEN	(1 << 12)
+#	define	 OTG_A_BUSREQ		(1 << 11)
+#	define	 OTG_B_HNPEN		(1 << 9)
+#	define	 OTG_B_BUSREQ		(1 << 8)
+#	define	 OTG_BUSDROP		(1 << 7)
+#	define	 OTG_PULLDOWN		(1 << 5)
+#	define	 OTG_PULLUP		(1 << 4)
+#	define	 OTG_DRV_VBUS		(1 << 3)
+#	define	 OTG_PD_VBUS		(1 << 2)
+#	define	 OTG_PU_VBUS		(1 << 1)
+#	define	 OTG_PU_ID		(1 << 0)
+#define OTG_IRQ_EN			(OTG_BASE + 0x10)	/* 16-bit */
+#	define	 DRIVER_SWITCH		(1 << 15)
+#	define	 A_VBUS_ERR		(1 << 13)
+#	define	 A_REQ_TMROUT		(1 << 12)
+#	define	 A_SRP_DETECT		(1 << 11)
+#	define	 B_HNP_FAIL		(1 << 10)
+#	define	 B_SRP_TMROUT		(1 << 9)
+#	define	 B_SRP_DONE		(1 << 8)
+#	define	 B_SRP_STARTED		(1 << 7)
+#	define	 OPRT_CHG		(1 << 0)
+#define OTG_IRQ_SRC			(OTG_BASE + 0x14)	/* 16-bit */
+	// same bits as in IRQ_EN
+#define OTG_OUTCTRL			(OTG_BASE + 0x18)	/* 16-bit */
+#	define	 OTGVPD			(1 << 14)
+#	define	 OTGVPU			(1 << 13)
+#	define	 OTGPUID		(1 << 12)
+#	define	 USB2VDR		(1 << 10)
+#	define	 USB2PDEN		(1 << 9)
+#	define	 USB2PUEN		(1 << 8)
+#	define	 USB1VDR		(1 << 6)
+#	define	 USB1PDEN		(1 << 5)
+#	define	 USB1PUEN		(1 << 4)
+#	define	 USB0VDR		(1 << 2)
+#	define	 USB0PDEN		(1 << 1)
+#	define	 USB0PUEN		(1 << 0)
+#define OTG_TEST			(OTG_BASE + 0x20)	/* 16-bit */
+#define OTG_VENDOR_CODE			(OTG_BASE + 0xfc)	/* 16-bit */
+
+/*-------------------------------------------------------------------------*/
+
+/* OMAP1 */
+#define	USB_TRANSCEIVER_CTRL		(0xfffe1000 + 0x0064)
+#	define	CONF_USB2_UNI_R		(1 << 8)
+#	define	CONF_USB1_UNI_R		(1 << 7)
+#	define	CONF_USB_PORT0_R(x)	(((x)>>4)&0x7)
+#	define	CONF_USB0_ISOLATE_R	(1 << 3)
+#	define	CONF_USB_PWRDN_DM_R	(1 << 2)
+#	define	CONF_USB_PWRDN_DP_R	(1 << 1)

arch/arm/mach-omap1/timer.c

@@ -140,7 +140,8 @@ static int __init omap1_dm_timer_init(void)
 		}
 
 		pdata->set_timer_src = omap1_dm_timer_set_src;
-		pdata->needs_manual_reset = 1;
+		pdata->timer_capability = OMAP_TIMER_ALWON |
+				OMAP_TIMER_NEEDS_RESET;
 
 		ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
 		if (ret) {

arch/arm/mach-omap1/usb.c

@@ -27,7 +27,8 @@
 #include <asm/irq.h>
 
 #include <plat/mux.h>
-#include <plat/usb.h>
+
+#include <mach/usb.h>
 
 #include "common.h"
 
@@ -55,6 +56,119 @@
 #define INT_USB_IRQ_HGEN	INT_USB_HHC_1
 #define INT_USB_IRQ_OTG		IH2_BASE + 8
 
+#ifdef	CONFIG_ARCH_OMAP_OTG
+
+void __init
+omap_otg_init(struct omap_usb_config *config)
+{
+	u32		syscon;
+	int		alt_pingroup = 0;
+
+	/* NOTE:  no bus or clock setup (yet?) */
+
+	syscon = omap_readl(OTG_SYSCON_1) & 0xffff;
+	if (!(syscon & OTG_RESET_DONE))
+		pr_debug("USB resets not complete?\n");
+
+	//omap_writew(0, OTG_IRQ_EN);
+
+	/* pin muxing and transceiver pinouts */
+	if (config->pins[0] > 2)	/* alt pingroup 2 */
+		alt_pingroup = 1;
+	syscon |= config->usb0_init(config->pins[0], is_usb0_device(config));
+	syscon |= config->usb1_init(config->pins[1]);
+	syscon |= config->usb2_init(config->pins[2], alt_pingroup);
+	pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
+	omap_writel(syscon, OTG_SYSCON_1);
+
+	syscon = config->hmc_mode;
+	syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
+#ifdef	CONFIG_USB_OTG
+	if (config->otg)
+		syscon |= OTG_EN;
+#endif
+	if (cpu_class_is_omap1())
+		pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
+			 omap_readl(USB_TRANSCEIVER_CTRL));
+	pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2));
+	omap_writel(syscon, OTG_SYSCON_2);
+
+	printk("USB: hmc %d", config->hmc_mode);
+	if (!alt_pingroup)
+		printk(", usb2 alt %d wires", config->pins[2]);
+	else if (config->pins[0])
+		printk(", usb0 %d wires%s", config->pins[0],
+			is_usb0_device(config) ? " (dev)" : "");
+	if (config->pins[1])
+		printk(", usb1 %d wires", config->pins[1]);
+	if (!alt_pingroup && config->pins[2])
+		printk(", usb2 %d wires", config->pins[2]);
+	if (config->otg)
+		printk(", Mini-AB on usb%d", config->otg - 1);
+	printk("\n");
+
+	if (cpu_class_is_omap1()) {
+		u16 w;
+
+		/* leave USB clocks/controllers off until needed */
+		w = omap_readw(ULPD_SOFT_REQ);
+		w &= ~SOFT_USB_CLK_REQ;
+		omap_writew(w, ULPD_SOFT_REQ);
+
+		w = omap_readw(ULPD_CLOCK_CTRL);
+		w &= ~USB_MCLK_EN;
+		w |= DIS_USB_PVCI_CLK;
+		omap_writew(w, ULPD_CLOCK_CTRL);
+	}
+	syscon = omap_readl(OTG_SYSCON_1);
+	syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
+
+#ifdef	CONFIG_USB_GADGET_OMAP
+	if (config->otg || config->register_dev) {
+		struct platform_device *udc_device = config->udc_device;
+		int status;
+
+		syscon &= ~DEV_IDLE_EN;
+		udc_device->dev.platform_data = config;
+		status = platform_device_register(udc_device);
+		if (status)
+			pr_debug("can't register UDC device, %d\n", status);
+	}
+#endif
+
+#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	if (config->otg || config->register_host) {
+		struct platform_device *ohci_device = config->ohci_device;
+		int status;
+
+		syscon &= ~HST_IDLE_EN;
+		ohci_device->dev.platform_data = config;
+		status = platform_device_register(ohci_device);
+		if (status)
+			pr_debug("can't register OHCI device, %d\n", status);
+	}
+#endif
+
+#ifdef	CONFIG_USB_OTG
+	if (config->otg) {
+		struct platform_device *otg_device = config->otg_device;
+		int status;
+
+		syscon &= ~OTG_IDLE_EN;
+		otg_device->dev.platform_data = config;
+		status = platform_device_register(otg_device);
+		if (status)
+			pr_debug("can't register OTG device, %d\n", status);
+	}
+#endif
+	pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
+	omap_writel(syscon, OTG_SYSCON_1);
+}
+
+#else
+void omap_otg_init(struct omap_usb_config *config) {}
+#endif
+
 #ifdef	CONFIG_USB_GADGET_OMAP
 
 static struct resource udc_resources[] = {

arch/arm/mach-omap2/Kconfig

@@ -21,12 +21,16 @@ config ARCH_OMAP2PLUS_TYPICAL
 	help
 	  Compile a kernel suitable for booting most boards
 
+config SOC_HAS_OMAP2_SDRC
+	bool "OMAP2 SDRAM Controller support"
+
 config ARCH_OMAP2
 	bool "TI OMAP2"
 	depends on ARCH_OMAP2PLUS
 	default y
 	select CPU_V6
 	select MULTI_IRQ_HANDLER
+	select SOC_HAS_OMAP2_SDRC
 
 config ARCH_OMAP3
 	bool "TI OMAP3"
@@ -38,6 +42,7 @@ config ARCH_OMAP3
 	select PM_OPP if PM
 	select ARM_CPU_SUSPEND if PM
 	select MULTI_IRQ_HANDLER
+	select SOC_HAS_OMAP2_SDRC
 
 config ARCH_OMAP4
 	bool "TI OMAP4"
@@ -64,19 +69,19 @@ config SOC_OMAP2420
 	depends on ARCH_OMAP2
 	default y
 	select OMAP_DM_TIMER
-	select ARCH_OMAP_OTG
+	select SOC_HAS_OMAP2_SDRC
 
 config SOC_OMAP2430
 	bool "OMAP2430 support"
 	depends on ARCH_OMAP2
 	default y
-	select ARCH_OMAP_OTG
+	select SOC_HAS_OMAP2_SDRC
 
 config SOC_OMAP3430
 	bool "OMAP3430 support"
 	depends on ARCH_OMAP3
 	default y
-	select ARCH_OMAP_OTG
+	select SOC_HAS_OMAP2_SDRC
 
 config SOC_TI81XX
 	bool "TI81XX support"
@@ -85,8 +90,10 @@ config SOC_TI81XX
 
 config SOC_AM33XX
 	bool "AM33XX support"
-	depends on ARCH_OMAP3
 	default y
+	select CPU_V7
+	select ARM_CPU_SUSPEND if PM
+	select MULTI_IRQ_HANDLER
 
 config OMAP_PACKAGE_ZAF
        bool

arch/arm/mach-omap2/Makefile

@@ -6,7 +6,7 @@
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o
 
-omap-2-3-common				= irq.o sdrc.o
+omap-2-3-common				= irq.o
 hwmod-common				= omap_hwmod.o \
 					  omap_hwmod_common_data.o
 clock-common				= clock.o clock_common_data.o \
@@ -16,12 +16,14 @@ secure-common				= omap-smc.o omap-secure.o
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
 obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
 
 ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
 obj-y += mcbsp.o
 endif
 
 obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
+obj-$(CONFIG_SOC_HAS_OMAP2_SDRC)	+= sdrc.o
 
 # SMP support ONLY available for OMAP4
 
@@ -90,6 +92,7 @@ obj-$(CONFIG_ARCH_OMAP3)		+= vc3xxx_data.o vp3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= prcm.o cminst44xx.o cm44xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= prcm_mpu44xx.o prminst44xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= vc44xx_data.o vp44xx_data.o prm44xx.o
+obj-$(CONFIG_SOC_AM33XX)		+= prcm.o prm33xx.o cm33xx.o
 
 # OMAP voltage domains
 voltagedomain-common			:= voltage.o vc.o vp.o
@@ -99,6 +102,8 @@ obj-$(CONFIG_ARCH_OMAP3)		+= $(voltagedomain-common)
 obj-$(CONFIG_ARCH_OMAP3)		+= voltagedomains3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(voltagedomain-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= voltagedomains44xx_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(voltagedomain-common)
+obj-$(CONFIG_SOC_AM33XX)                += voltagedomains33xx_data.o
 
 # OMAP powerdomain framework
 powerdomain-common			+= powerdomain.o powerdomain-common.o
@@ -113,10 +118,12 @@ obj-$(CONFIG_ARCH_OMAP3)		+= powerdomains2xxx_3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(powerdomain-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= powerdomain44xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= powerdomains44xx_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(powerdomain-common)
+obj-$(CONFIG_SOC_AM33XX)		+= powerdomain33xx.o
+obj-$(CONFIG_SOC_AM33XX)		+= powerdomains33xx_data.o
 
 # PRCM clockdomain control
 clockdomain-common			+= clockdomain.o
-clockdomain-common			+= clockdomains_common_data.o
 obj-$(CONFIG_ARCH_OMAP2)		+= $(clockdomain-common)
 obj-$(CONFIG_ARCH_OMAP2)		+= clockdomain2xxx_3xxx.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clockdomains2xxx_3xxx_data.o
@@ -129,6 +136,9 @@ obj-$(CONFIG_ARCH_OMAP3)		+= clockdomains3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clockdomain-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= clockdomain44xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clockdomains44xx_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(clockdomain-common)
+obj-$(CONFIG_SOC_AM33XX)		+= clockdomain33xx.o
+obj-$(CONFIG_SOC_AM33XX)		+= clockdomains33xx_data.o
 
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o
@@ -146,6 +156,7 @@ obj-$(CONFIG_ARCH_OMAP3)		+= dpll3xxx.o clock3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common) dpll3xxx.o
 
 # OMAP2 clock rate set data (old "OPP" data)
 obj-$(CONFIG_SOC_OMAP2420)		+= opp2420_data.o
@@ -244,9 +255,6 @@ obj-y					+= $(omap-flash-y) $(omap-flash-m)
 omap-hsmmc-$(CONFIG_MMC_OMAP_HS)	:= hsmmc.o
 obj-y					+= $(omap-hsmmc-m) $(omap-hsmmc-y)
 
-
-usbfs-$(CONFIG_ARCH_OMAP_OTG)		:= usb-fs.o
-obj-y					+= $(usbfs-m) $(usbfs-y)
 obj-y					+= usb-musb.o
 obj-y					+= omap_phy_internal.o
 

arch/arm/mach-omap2/board-2430sdp.c

@@ -254,16 +254,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 	{}	/* Terminator */
 };
 
-static struct omap_usb_config sdp2430_usb_config __initdata = {
-	.otg		= 1,
-#ifdef  CONFIG_USB_GADGET_OMAP
-	.hmc_mode	= 0x0,
-#elif   defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-	.hmc_mode	= 0x1,
-#endif
-	.pins[0]	= 3,
-};
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -280,7 +270,6 @@ static void __init omap_2430sdp_init(void)
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
 	omap_hsmmc_init(mmc);
-	omap2_usbfs_init(&sdp2430_usb_config);
 
 	omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
 	usb_musb_init(NULL);

arch/arm/mach-omap2/board-apollon.c

@@ -35,7 +35,6 @@
 #include <asm/mach/flash.h>
 
 #include <plat/led.h>
-#include <plat/usb.h>
 #include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
@@ -253,13 +252,6 @@ static inline void __init apollon_init_smc91x(void)
 	clk_put(gpmc_fck);
 }
 
-static struct omap_usb_config apollon_usb_config __initdata = {
-	.register_dev	= 1,
-	.hmc_mode	= 0x14,	/* 0:dev 1:host1 2:disable */
-
-	.pins[0]	= 6,
-};
-
 static struct panel_generic_dpi_data apollon_panel_data = {
 	.name			= "apollon",
 };
@@ -297,15 +289,6 @@ static void __init apollon_led_init(void)
 	gpio_request_array(apollon_gpio_leds, ARRAY_SIZE(apollon_gpio_leds));
 }
 
-static void __init apollon_usb_init(void)
-{
-	/* USB device */
-	/* DEVICE_SUSPEND */
-	omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
-	gpio_request_one(12, GPIOF_OUT_INIT_LOW, "USB suspend");
-	omap2_usbfs_init(&apollon_usb_config);
-}
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -321,7 +304,6 @@ static void __init omap_apollon_init(void)
 	apollon_init_smc91x();
 	apollon_led_init();
 	apollon_flash_init();
-	apollon_usb_init();
 
 	/* REVISIT: where's the correct place */
 	omap_mux_init_signal("sys_nirq", OMAP_PULL_ENA | OMAP_PULL_UP);

arch/arm/mach-omap2/board-generic.c

@@ -112,6 +112,24 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 MACHINE_END
 #endif
 
+#ifdef CONFIG_SOC_AM33XX
+static const char *am33xx_boards_compat[] __initdata = {
+	"ti,am33xx",
+	NULL,
+};
+
+DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)")
+	.reserve	= omap_reserve,
+	.map_io		= am33xx_map_io,
+	.init_early	= am33xx_init_early,
+	.init_irq	= omap_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
+	.init_machine	= omap_generic_init,
+	.timer		= &omap3_am33xx_timer,
+	.dt_compat	= am33xx_boards_compat,
+MACHINE_END
+#endif
+
 #ifdef CONFIG_ARCH_OMAP4
 static const char *omap4_boards_compat[] __initdata = {
 	"ti,omap4",

arch/arm/mach-omap2/board-h4.c

@@ -32,7 +32,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/usb.h>
 #include <plat/board.h>
 #include "common.h"
 #include <plat/menelaus.h>
@@ -329,17 +328,6 @@ static void __init h4_init_flash(void)
 	h4_flash_resource.end	= base + SZ_64M - 1;
 }
 
-static struct omap_usb_config h4_usb_config __initdata = {
-	/* S1.10 OFF -- usb "download port"
-	 * usb0 switched to Mini-B port and isp1105 transceiver;
-	 * S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging
-	 */
-	.register_dev	= 1,
-	.pins[0]	= 3,
-/*	.hmc_mode	= 0x14,*/	/* 0:dev 1:host 2:disable */
-	.hmc_mode	= 0x00,		/* 0:dev|otg 1:disable 2:disable */
-};
-
 static struct at24_platform_data m24c01 = {
 	.byte_len	= SZ_1K / 8,
 	.page_size	= 16,
@@ -381,7 +369,6 @@ static void __init omap_h4_init(void)
 			ARRAY_SIZE(h4_i2c_board_info));
 
 	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
-	omap2_usbfs_init(&h4_usb_config);
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
 	h4_init_flash();

arch/arm/mach-omap2/clock.c

@@ -398,24 +398,6 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 	return omap2_clksel_set_parent(clk, new_parent);
 }
 
-/* OMAP3/4 non-CORE DPLL clkops */
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-
-const struct clkops clkops_omap3_noncore_dpll_ops = {
-	.enable		= omap3_noncore_dpll_enable,
-	.disable	= omap3_noncore_dpll_disable,
-	.allow_idle	= omap3_dpll_allow_idle,
-	.deny_idle	= omap3_dpll_deny_idle,
-};
-
-const struct clkops clkops_omap3_core_dpll_ops = {
-	.allow_idle	= omap3_dpll_allow_idle,
-	.deny_idle	= omap3_dpll_deny_idle,
-};
-
-#endif
-
 /*
  * OMAP2+ clock reset and init functions
  */

arch/arm/mach-omap2/clock2420_data.c

@@ -1774,8 +1774,6 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"osc_ck",	&osc_ck,	CK_242X),
 	CLK(NULL,	"sys_ck",	&sys_ck,	CK_242X),
 	CLK(NULL,	"alt_ck",	&alt_ck,	CK_242X),
-	CLK("omap-mcbsp.1",	"pad_fck",	&mcbsp_clks,	CK_242X),
-	CLK("omap-mcbsp.2",	"pad_fck",	&mcbsp_clks,	CK_242X),
 	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_242X),
 	/* internal analog sources */
 	CLK(NULL,	"dpll_ck",	&dpll_ck,	CK_242X),
@@ -1784,8 +1782,6 @@ static struct omap_clk omap2420_clks[] = {
 	/* internal prcm root sources */
 	CLK(NULL,	"func_54m_ck",	&func_54m_ck,	CK_242X),
 	CLK(NULL,	"core_ck",	&core_ck,	CK_242X),
-	CLK("omap-mcbsp.1",	"prcm_fck",	&func_96m_ck,	CK_242X),
-	CLK("omap-mcbsp.2",	"prcm_fck",	&func_96m_ck,	CK_242X),
 	CLK(NULL,	"func_96m_ck",	&func_96m_ck,	CK_242X),
 	CLK(NULL,	"func_48m_ck",	&func_48m_ck,	CK_242X),
 	CLK(NULL,	"func_12m_ck",	&func_12m_ck,	CK_242X),
@@ -1901,42 +1897,9 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_242X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_242X),
 	CLK("musb-hdrc",	"fck",	&osc_ck,	CK_242X),
-	CLK("omap_timer.1",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.2",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.3",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.4",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.5",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.6",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.7",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.8",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.9",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.10",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.11",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.12",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.1",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.2",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.3",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.4",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.5",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.6",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.7",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.8",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.9",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.10",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.11",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.12",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.1",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.2",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.3",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.4",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.5",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.6",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.7",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.8",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.9",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.10",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.11",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.12",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK(NULL,	"timer_32k_ck",	&func_32k_ck,	CK_243X),
+	CLK(NULL,	"timer_sys_ck",	&sys_ck,	CK_243X),
+	CLK(NULL,	"timer_ext_ck",	&alt_ck,	CK_243X),
 };
 
 /*

arch/arm/mach-omap2/clock2430_data.c

@@ -1858,11 +1858,6 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"osc_ck",	&osc_ck,	CK_243X),
 	CLK(NULL,	"sys_ck",	&sys_ck,	CK_243X),
 	CLK(NULL,	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap-mcbsp.1",	"pad_fck",	&mcbsp_clks,	CK_243X),
-	CLK("omap-mcbsp.2",	"pad_fck",	&mcbsp_clks,	CK_243X),
-	CLK("omap-mcbsp.3",	"pad_fck",	&mcbsp_clks,	CK_243X),
-	CLK("omap-mcbsp.4",	"pad_fck",	&mcbsp_clks,	CK_243X),
-	CLK("omap-mcbsp.5",	"pad_fck",	&mcbsp_clks,	CK_243X),
 	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_243X),
 	/* internal analog sources */
 	CLK(NULL,	"dpll_ck",	&dpll_ck,	CK_243X),
@@ -1871,11 +1866,6 @@ static struct omap_clk omap2430_clks[] = {
 	/* internal prcm root sources */
 	CLK(NULL,	"func_54m_ck",	&func_54m_ck,	CK_243X),
 	CLK(NULL,	"core_ck",	&core_ck,	CK_243X),
-	CLK("omap-mcbsp.1",	"prcm_fck",	&func_96m_ck,	CK_243X),
-	CLK("omap-mcbsp.2",	"prcm_fck",	&func_96m_ck,	CK_243X),
-	CLK("omap-mcbsp.3",	"prcm_fck",	&func_96m_ck,	CK_243X),
-	CLK("omap-mcbsp.4",	"prcm_fck",	&func_96m_ck,	CK_243X),
-	CLK("omap-mcbsp.5",	"prcm_fck",	&func_96m_ck,	CK_243X),
 	CLK(NULL,	"func_96m_ck",	&func_96m_ck,	CK_243X),
 	CLK(NULL,	"func_48m_ck",	&func_48m_ck,	CK_243X),
 	CLK(NULL,	"func_12m_ck",	&func_12m_ck,	CK_243X),
@@ -2000,42 +1990,9 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"mdm_intc_ick",	&mdm_intc_ick,	CK_243X),
 	CLK("omap_hsmmc.0", "mmchsdb_fck",	&mmchsdb1_fck,	CK_243X),
 	CLK("omap_hsmmc.1", "mmchsdb_fck",	&mmchsdb2_fck,	CK_243X),
-	CLK("omap_timer.1",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.2",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.3",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.4",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.5",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.6",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.7",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.8",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.9",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.10",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.11",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.12",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.1",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.2",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.3",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.4",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.5",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.6",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.7",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.8",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.9",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.10",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.11",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.12",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.1",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.2",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.3",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.4",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.5",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.6",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.7",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.8",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.9",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.10",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.11",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.12",	"alt_ck",	&alt_ck,	CK_243X),
+	CLK(NULL,	"timer_32k_ck",  &func_32k_ck,   CK_243X),
+	CLK(NULL,	"timer_sys_ck",	&sys_ck,	CK_243X),
+	CLK(NULL,	"timer_ext_ck",	&alt_ck,	CK_243X),
 };
 
 /*

arch/arm/mach-omap2/clock3xxx_data.c

@@ -3236,11 +3236,6 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"osc_sys_ck",	&osc_sys_ck,	CK_3XXX),
 	CLK(NULL,	"sys_ck",	&sys_ck,	CK_3XXX),
 	CLK(NULL,	"sys_altclk",	&sys_altclk,	CK_3XXX),
-	CLK("omap-mcbsp.1",	"pad_fck",	&mcbsp_clks,	CK_3XXX),
-	CLK("omap-mcbsp.2",	"pad_fck",	&mcbsp_clks,	CK_3XXX),
-	CLK("omap-mcbsp.3",	"pad_fck",	&mcbsp_clks,	CK_3XXX),
-	CLK("omap-mcbsp.4",	"pad_fck",	&mcbsp_clks,	CK_3XXX),
-	CLK("omap-mcbsp.5",	"pad_fck",	&mcbsp_clks,	CK_3XXX),
 	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_3XXX),
 	CLK(NULL,	"sys_clkout1",	&sys_clkout1,	CK_3XXX),
 	CLK(NULL,	"dpll1_ck",	&dpll1_ck,	CK_3XXX),
@@ -3307,8 +3302,6 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK("usbhs_omap",	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("omap-mcbsp.1",	"prcm_fck",	&core_96m_fck,	CK_3XXX),
-	CLK("omap-mcbsp.5",	"prcm_fck",	&core_96m_fck,	CK_3XXX),
 	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_3XXX),
 	CLK(NULL,	"mmchs3_fck",	&mmchs3_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"mmchs2_fck",	&mmchs2_fck,	CK_3XXX),
@@ -3413,9 +3406,6 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX),
 	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_3XXX),
 	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_3XXX),
-	CLK("omap-mcbsp.2",	"prcm_fck",	&per_96m_fck,	CK_3XXX),
-	CLK("omap-mcbsp.3",	"prcm_fck",	&per_96m_fck,	CK_3XXX),
-	CLK("omap-mcbsp.4",	"prcm_fck",	&per_96m_fck,	CK_3XXX),
 	CLK(NULL,	"per_96m_fck",	&per_96m_fck,	CK_3XXX),
 	CLK(NULL,	"per_48m_fck",	&per_48m_fck,	CK_3XXX),
 	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_3XXX),
@@ -3482,30 +3472,8 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK("musb-am35x",	"fck",		&hsotgusb_fck_am35xx,	CK_AM35XX),
 	CLK(NULL,	"hecc_ck",	&hecc_ck,	CK_AM35XX),
 	CLK(NULL,	"uart4_ick",	&uart4_ick_am35xx,	CK_AM35XX),
-	CLK("omap_timer.1",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.2",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.3",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.4",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.5",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.6",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.7",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.8",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.9",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.10",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.11",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.12",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.1",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.2",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.3",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.4",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.5",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.6",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.7",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.8",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.9",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.10",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.11",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.12",	"sys_ck",	&sys_ck,	CK_3XXX),
+	CLK(NULL,	"timer_32k_ck",	&omap_32k_fck,  CK_3XXX),
+	CLK(NULL,	"timer_sys_ck",	&sys_ck,	CK_3XXX),
 };
 
 
@@ -3523,7 +3491,7 @@ int __init omap3xxx_clk_init(void)
 	} else if (cpu_is_ti816x()) {
 		cpu_mask = RATE_IN_TI816X;
 		cpu_clkflg = CK_TI816X;
-	} else if (cpu_is_am33xx()) {
+	} else if (soc_is_am33xx()) {
 		cpu_mask = RATE_IN_AM33XX;
 	} else if (cpu_is_ti814x()) {
 		cpu_mask = RATE_IN_TI814X;

arch/arm/mach-omap2/clock44xx_data.c

@@ -3299,17 +3299,17 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"smartreflex_core_fck",		&smartreflex_core_fck,	CK_443X),
 	CLK(NULL,	"smartreflex_iva_fck",		&smartreflex_iva_fck,	CK_443X),
 	CLK(NULL,	"smartreflex_mpu_fck",		&smartreflex_mpu_fck,	CK_443X),
-	CLK(NULL,	"gpt1_fck",			&timer1_fck,	CK_443X),
-	CLK(NULL,	"gpt10_fck",			&timer10_fck,	CK_443X),
-	CLK(NULL,	"gpt11_fck",			&timer11_fck,	CK_443X),
-	CLK(NULL,	"gpt2_fck",			&timer2_fck,	CK_443X),
-	CLK(NULL,	"gpt3_fck",			&timer3_fck,	CK_443X),
-	CLK(NULL,	"gpt4_fck",			&timer4_fck,	CK_443X),
-	CLK(NULL,	"gpt5_fck",			&timer5_fck,	CK_443X),
-	CLK(NULL,	"gpt6_fck",			&timer6_fck,	CK_443X),
-	CLK(NULL,	"gpt7_fck",			&timer7_fck,	CK_443X),
-	CLK(NULL,	"gpt8_fck",			&timer8_fck,	CK_443X),
-	CLK(NULL,	"gpt9_fck",			&timer9_fck,	CK_443X),
+	CLK(NULL,	"timer1_fck",			&timer1_fck,	CK_443X),
+	CLK(NULL,	"timer10_fck",			&timer10_fck,	CK_443X),
+	CLK(NULL,	"timer11_fck",			&timer11_fck,	CK_443X),
+	CLK(NULL,	"timer2_fck",			&timer2_fck,	CK_443X),
+	CLK(NULL,	"timer3_fck",			&timer3_fck,	CK_443X),
+	CLK(NULL,	"timer4_fck",			&timer4_fck,	CK_443X),
+	CLK(NULL,	"timer5_fck",			&timer5_fck,	CK_443X),
+	CLK(NULL,	"timer6_fck",			&timer6_fck,	CK_443X),
+	CLK(NULL,	"timer7_fck",			&timer7_fck,	CK_443X),
+	CLK(NULL,	"timer8_fck",			&timer8_fck,	CK_443X),
+	CLK(NULL,	"timer9_fck",			&timer9_fck,	CK_443X),
 	CLK(NULL,	"uart1_fck",			&uart1_fck,	CK_443X),
 	CLK(NULL,	"uart2_fck",			&uart2_fck,	CK_443X),
 	CLK(NULL,	"uart3_fck",			&uart3_fck,	CK_443X),
@@ -3385,28 +3385,18 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK("usbhs_omap",	"usbhost_ick",		&dummy_ck,		CK_443X),
 	CLK("usbhs_omap",	"usbtll_fck",		&dummy_ck,	CK_443X),
 	CLK("omap_wdt",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap_timer.1",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.2",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.3",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.4",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.5",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.6",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.7",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.8",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.9",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.10",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.11",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.1",	"sys_ck",	&sys_clkin_ck,	CK_443X),
-	CLK("omap_timer.2",	"sys_ck",	&sys_clkin_ck,	CK_443X),
-	CLK("omap_timer.3",	"sys_ck",	&sys_clkin_ck,	CK_443X),
-	CLK("omap_timer.4",	"sys_ck",	&sys_clkin_ck,	CK_443X),
-	CLK("omap_timer.9",	"sys_ck",	&sys_clkin_ck,	CK_443X),
-	CLK("omap_timer.10",	"sys_ck",	&sys_clkin_ck,	CK_443X),
-	CLK("omap_timer.11",	"sys_ck",	&sys_clkin_ck,	CK_443X),
-	CLK("omap_timer.5",	"sys_ck",	&syc_clk_div_ck,	CK_443X),
-	CLK("omap_timer.6",	"sys_ck",	&syc_clk_div_ck,	CK_443X),
-	CLK("omap_timer.7",	"sys_ck",	&syc_clk_div_ck,	CK_443X),
-	CLK("omap_timer.8",	"sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK(NULL,	"timer_32k_ck",	&sys_32k_ck,	CK_443X),
+	CLK("omap_timer.1",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("omap_timer.2",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("omap_timer.3",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("omap_timer.4",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("omap_timer.9",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("omap_timer.10",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("omap_timer.11",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("omap_timer.5",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("omap_timer.6",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("omap_timer.7",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("omap_timer.8",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
 };
 
 int __init omap4xxx_clk_init(void)

arch/arm/mach-omap2/clockdomain.h

@@ -195,6 +195,7 @@ int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh);
 extern void __init omap242x_clockdomains_init(void);
 extern void __init omap243x_clockdomains_init(void);
 extern void __init omap3xxx_clockdomains_init(void);
+extern void __init am33xx_clockdomains_init(void);
 extern void __init omap44xx_clockdomains_init(void);
 extern void _clkdm_add_autodeps(struct clockdomain *clkdm);
 extern void _clkdm_del_autodeps(struct clockdomain *clkdm);
@@ -202,11 +203,10 @@ extern void _clkdm_del_autodeps(struct clockdomain *clkdm);
 extern struct clkdm_ops omap2_clkdm_operations;
 extern struct clkdm_ops omap3_clkdm_operations;
 extern struct clkdm_ops omap4_clkdm_operations;
+extern struct clkdm_ops am33xx_clkdm_operations;
 
 extern struct clkdm_dep gfx_24xx_wkdeps[];
 extern struct clkdm_dep dsp_24xx_wkdeps[];
 extern struct clockdomain wkup_common_clkdm;
-extern struct clockdomain prm_common_clkdm;
-extern struct clockdomain cm_common_clkdm;
 
 #endif

arch/arm/mach-omap2/clockdomain33xx.c

+/*
+ * AM33XX clockdomain control
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Derived from mach-omap2/clockdomain44xx.c written by Rajendra Nayak
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+
+#include "clockdomain.h"
+#include "cm33xx.h"
+
+
+static int am33xx_clkdm_sleep(struct clockdomain *clkdm)
+{
+	am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs);
+	return 0;
+}
+
+static int am33xx_clkdm_wakeup(struct clockdomain *clkdm)
+{
+	am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs);
+	return 0;
+}
+
+static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+	am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+}
+
+static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+	am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+}
+
+static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+	if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+		return am33xx_clkdm_wakeup(clkdm);
+
+	return 0;
+}
+
+static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+	bool hwsup = false;
+
+	hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+
+	if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
+		am33xx_clkdm_sleep(clkdm);
+
+	return 0;
+}
+
+struct clkdm_ops am33xx_clkdm_operations = {
+	.clkdm_sleep		= am33xx_clkdm_sleep,
+	.clkdm_wakeup		= am33xx_clkdm_wakeup,
+	.clkdm_allow_idle	= am33xx_clkdm_allow_idle,
+	.clkdm_deny_idle	= am33xx_clkdm_deny_idle,
+	.clkdm_clk_enable	= am33xx_clkdm_clk_enable,
+	.clkdm_clk_disable	= am33xx_clkdm_clk_disable,
+};

arch/arm/mach-omap2/clockdomain44xx.c

@@ -70,7 +70,7 @@ static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
 
 static int omap4_clkdm_sleep(struct clockdomain *clkdm)
 {
-	omap4_cminst_clkdm_force_sleep(clkdm->prcm_partition,
+	omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
 					clkdm->cm_inst, clkdm->clkdm_offs);
 	return 0;
 }
@@ -90,8 +90,12 @@ static void omap4_clkdm_allow_idle(struct clockdomain *clkdm)
 
 static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
 {
-	omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
-					clkdm->cm_inst, clkdm->clkdm_offs);
+	if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+		omap4_clkdm_wakeup(clkdm);
+	else
+		omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
+						 clkdm->cm_inst,
+						 clkdm->clkdm_offs);
 }
 
 static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)

arch/arm/mach-omap2/clockdomains2420_data.c

@@ -131,8 +131,6 @@ static struct clockdomain dss_2420_clkdm = {
 
 static struct clockdomain *clockdomains_omap242x[] __initdata = {
 	&wkup_common_clkdm,
-	&cm_common_clkdm,
-	&prm_common_clkdm,
 	&mpu_2420_clkdm,
 	&iva1_2420_clkdm,
 	&dsp_2420_clkdm,

arch/arm/mach-omap2/clockdomains2430_data.c

@@ -157,8 +157,6 @@ static struct clockdomain dss_2430_clkdm = {
 
 static struct clockdomain *clockdomains_omap243x[] __initdata = {
 	&wkup_common_clkdm,
-	&cm_common_clkdm,
-	&prm_common_clkdm,
 	&mpu_2430_clkdm,
 	&mdm_clkdm,
 	&dsp_2430_clkdm,

arch/arm/mach-omap2/clockdomains33xx_data.c

+/*
+ * AM33XX Clock Domain data.
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "cm.h"
+#include "cm33xx.h"
+#include "cm-regbits-33xx.h"
+
+static struct clockdomain l4ls_am33xx_clkdm = {
+	.name		= "l4ls_clkdm",
+	.pwrdm		= { .name = "per_pwrdm" },
+	.cm_inst	= AM33XX_CM_PER_MOD,
+	.clkdm_offs	= AM33XX_CM_PER_L4LS_CLKSTCTRL_OFFSET,
+	.flags		= CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3s_am33xx_clkdm = {
+	.name		= "l3s_clkdm",
+	.pwrdm		= { .name = "per_pwrdm" },
+	.cm_inst	= AM33XX_CM_PER_MOD,
+	.clkdm_offs	= AM33XX_CM_PER_L3S_CLKSTCTRL_OFFSET,
+	.flags		= CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4fw_am33xx_clkdm = {
+	.name		= "l4fw_clkdm",
+	.pwrdm		= { .name = "per_pwrdm" },
+	.cm_inst	= AM33XX_CM_PER_MOD,
+	.clkdm_offs	= AM33XX_CM_PER_L4FW_CLKSTCTRL_OFFSET,
+	.flags		= CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3_am33xx_clkdm = {
+	.name		= "l3_clkdm",
+	.pwrdm		= { .name = "per_pwrdm" },
+	.cm_inst	= AM33XX_CM_PER_MOD,
+	.clkdm_offs	= AM33XX_CM_PER_L3_CLKSTCTRL_OFFSET,
+	.flags		= CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4hs_am33xx_clkdm = {
+	.name		= "l4hs_clkdm",
+	.pwrdm		= { .name = "per_pwrdm" },
+	.cm_inst	= AM33XX_CM_PER_MOD,
+	.clkdm_offs	= AM33XX_CM_PER_L4HS_CLKSTCTRL_OFFSET,
+	.flags		= CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain ocpwp_l3_am33xx_clkdm = {
+	.name		= "ocpwp_l3_clkdm",
+	.pwrdm		= { .name = "per_pwrdm" },
+	.cm_inst	= AM33XX_CM_PER_MOD,
+	.clkdm_offs	= AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL_OFFSET,
+	.flags		= CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain pruss_ocp_am33xx_clkdm = {
+	.name		= "pruss_ocp_clkdm",
+	.pwrdm		= { .name = "per_pwrdm" },
+	.cm_inst	= AM33XX_CM_PER_MOD,
+	.clkdm_offs	= AM33XX_CM_PER_PRUSS_CLKSTCTRL_OFFSET,
+	.flags		= CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain cpsw_125mhz_am33xx_clkdm = {
+	.name		= "cpsw_125mhz_clkdm",
+	.pwrdm		= { .name = "per_pwrdm" },
+	.cm_inst	= AM33XX_CM_PER_MOD,
+	.clkdm_offs	= AM33XX_CM_PER_CPSW_CLKSTCTRL_OFFSET,
+	.flags		= CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain lcdc_am33xx_clkdm = {
+	.name		= "lcdc_clkdm",
+	.pwrdm		= { .name = "per_pwrdm" },
+	.cm_inst	= AM33XX_CM_PER_MOD,
+	.clkdm_offs	= AM33XX_CM_PER_LCDC_CLKSTCTRL_OFFSET,
+	.flags		= CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain clk_24mhz_am33xx_clkdm = {
+	.name		= "clk_24mhz_clkdm",
+	.pwrdm		= { .name = "per_pwrdm" },
+	.cm_inst	= AM33XX_CM_PER_MOD,
+	.clkdm_offs	= AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL_OFFSET,
+	.flags		= CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_wkup_am33xx_clkdm = {
+	.name		= "l4_wkup_clkdm",
+	.pwrdm		= { .name = "wkup_pwrdm" },
+	.cm_inst	= AM33XX_CM_WKUP_MOD,
+	.clkdm_offs	= AM33XX_CM_WKUP_CLKSTCTRL_OFFSET,
+	.flags		= CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3_aon_am33xx_clkdm = {
+	.name		= "l3_aon_clkdm",
+	.pwrdm		= { .name = "wkup_pwrdm" },
+	.cm_inst	= AM33XX_CM_WKUP_MOD,
+	.clkdm_offs	= AM33XX_CM_L3_AON_CLKSTCTRL_OFFSET,
+	.flags		= CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_wkup_aon_am33xx_clkdm = {
+	.name		= "l4_wkup_aon_clkdm",
+	.pwrdm		= { .name = "wkup_pwrdm" },
+	.cm_inst	= AM33XX_CM_WKUP_MOD,
+	.clkdm_offs	= AM33XX_CM_L4_WKUP_AON_CLKSTCTRL_OFFSET,
+	.flags		= CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain mpu_am33xx_clkdm = {
+	.name		= "mpu_clkdm",
+	.pwrdm		= { .name = "mpu_pwrdm" },
+	.cm_inst	= AM33XX_CM_MPU_MOD,
+	.clkdm_offs	= AM33XX_CM_MPU_CLKSTCTRL_OFFSET,
+	.flags		= CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_rtc_am33xx_clkdm = {
+	.name		= "l4_rtc_clkdm",
+	.pwrdm		= { .name = "rtc_pwrdm" },
+	.cm_inst	= AM33XX_CM_RTC_MOD,
+	.clkdm_offs	= AM33XX_CM_RTC_CLKSTCTRL_OFFSET,
+	.flags		= CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain gfx_l3_am33xx_clkdm = {
+	.name		= "gfx_l3_clkdm",
+	.pwrdm		= { .name = "gfx_pwrdm" },
+	.cm_inst	= AM33XX_CM_GFX_MOD,
+	.clkdm_offs	= AM33XX_CM_GFX_L3_CLKSTCTRL_OFFSET,
+	.flags		= CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain gfx_l4ls_gfx_am33xx_clkdm = {
+	.name		= "gfx_l4ls_gfx_clkdm",
+	.pwrdm		= { .name = "gfx_pwrdm" },
+	.cm_inst	= AM33XX_CM_GFX_MOD,
+	.clkdm_offs	= AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1_OFFSET,
+	.flags		= CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_cefuse_am33xx_clkdm = {
+	.name		= "l4_cefuse_clkdm",
+	.pwrdm		= { .name = "cefuse_pwrdm" },
+	.cm_inst	= AM33XX_CM_CEFUSE_MOD,
+	.clkdm_offs	= AM33XX_CM_CEFUSE_CLKSTCTRL_OFFSET,
+	.flags		= CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain *clockdomains_am33xx[] __initdata = {
+	&l4ls_am33xx_clkdm,
+	&l3s_am33xx_clkdm,
+	&l4fw_am33xx_clkdm,
+	&l3_am33xx_clkdm,
+	&l4hs_am33xx_clkdm,
+	&ocpwp_l3_am33xx_clkdm,
+	&pruss_ocp_am33xx_clkdm,
+	&cpsw_125mhz_am33xx_clkdm,
+	&lcdc_am33xx_clkdm,
+	&clk_24mhz_am33xx_clkdm,
+	&l4_wkup_am33xx_clkdm,
+	&l3_aon_am33xx_clkdm,
+	&l4_wkup_aon_am33xx_clkdm,
+	&mpu_am33xx_clkdm,
+	&l4_rtc_am33xx_clkdm,
+	&gfx_l3_am33xx_clkdm,
+	&gfx_l4ls_gfx_am33xx_clkdm,
+	&l4_cefuse_am33xx_clkdm,
+	NULL,
+};
+
+void __init am33xx_clockdomains_init(void)
+{
+	clkdm_register_platform_funcs(&am33xx_clkdm_operations);
+	clkdm_register_clkdms(clockdomains_am33xx);
+	clkdm_complete_init();
+}

arch/arm/mach-omap2/clockdomains3xxx_data.c

@@ -347,8 +347,6 @@ static struct clkdm_autodep clkdm_autodeps[] = {
 
 static struct clockdomain *clockdomains_omap3430_common[] __initdata = {
 	&wkup_common_clkdm,
-	&cm_common_clkdm,
-	&prm_common_clkdm,
 	&mpu_3xxx_clkdm,
 	&neon_clkdm,
 	&iva2_clkdm,

arch/arm/mach-omap2/clockdomains44xx_data.c

@@ -430,8 +430,6 @@ static struct clockdomain *clockdomains_omap44xx[] __initdata = {
 	&l4_wkup_44xx_clkdm,
 	&emu_sys_44xx_clkdm,
 	&l3_dma_44xx_clkdm,
-	&prm_common_clkdm,
-	&cm_common_clkdm,
 	NULL
 };
 

arch/arm/mach-omap2/clockdomains_common_data.c

-/*
- * OMAP2+-common clockdomain data
- *
- * Copyright (C) 2008-2012 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Paul Walmsley, Jouni Högander
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include "clockdomain.h"
-
-/* These are implicit clockdomains - they are never defined as such in TRM */
-struct clockdomain prm_common_clkdm = {
-	.name		= "prm_clkdm",
-	.pwrdm		= { .name = "wkup_pwrdm" },
-};
-
-struct clockdomain cm_common_clkdm = {
-	.name		= "cm_clkdm",
-	.pwrdm		= { .name = "core_pwrdm" },
-};

arch/arm/mach-omap2/cm-regbits-33xx.h

+/*
+ * AM33XX Power Management register bits
+ *
+ * This file is automatically generated from the AM33XX hardware databases.
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_33XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_33XX_H
+
+/*
+ * Used by CM_AUTOIDLE_DPLL_CORE, CM_AUTOIDLE_DPLL_DDR, CM_AUTOIDLE_DPLL_DISP,
+ * CM_AUTOIDLE_DPLL_MPU, CM_AUTOIDLE_DPLL_PER
+ */
+#define AM33XX_AUTO_DPLL_MODE_SHIFT			0
+#define AM33XX_AUTO_DPLL_MODE_MASK			(0x7 << 0)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_ADC_FCLK_SHIFT		14
+#define AM33XX_CLKACTIVITY_ADC_FCLK_MASK		(1 << 16)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CAN_CLK_SHIFT		11
+#define AM33XX_CLKACTIVITY_CAN_CLK_MASK			(1 << 11)
+
+/* Used by CM_PER_CLK_24MHZ_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_SHIFT		4
+#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_MASK		(1 << 4)
+
+/* Used by CM_PER_CPSW_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_SHIFT	4
+#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_MASK	(1 << 4)
+
+/* Used by CM_PER_L4HS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_SHIFT	4
+#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_MASK	(1 << 4)
+
+/* Used by CM_PER_L4HS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_SHIFT	5
+#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_MASK		(1 << 5)
+
+/* Used by CM_PER_L4HS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_SHIFT		6
+#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_MASK		(1 << 6)
+
+/* Used by CM_PER_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_SHIFT		6
+#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_MASK		(1 << 6)
+
+/* Used by CM_CEFUSE_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT	9
+#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK	(1 << 9)
+
+/* Used by CM_L3_AON_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_DBGSYSCLK_SHIFT		2
+#define AM33XX_CLKACTIVITY_DBGSYSCLK_MASK		(1 << 2)
+
+/* Used by CM_L3_AON_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_DEBUG_CLKA_SHIFT		4
+#define AM33XX_CLKACTIVITY_DEBUG_CLKA_MASK		(1 << 4)
+
+/* Used by CM_PER_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_EMIF_GCLK_SHIFT		2
+#define AM33XX_CLKACTIVITY_EMIF_GCLK_MASK		(1 << 2)
+
+/* Used by CM_GFX_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GFX_FCLK_SHIFT		9
+#define AM33XX_CLKACTIVITY_GFX_FCLK_MASK		(1 << 9)
+
+/* Used by CM_GFX_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_SHIFT		8
+#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_MASK		(1 << 8)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_SHIFT		8
+#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_MASK		(1 << 8)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_SHIFT		19
+#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_MASK		(1 << 19)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_SHIFT		20
+#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_MASK		(1 << 20)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_SHIFT		21
+#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_MASK		(1 << 21)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_SHIFT		22
+#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_MASK		(1 << 22)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_SHIFT		26
+#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_MASK		(1 << 26)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_SHIFT		18
+#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_MASK		(1 << 18)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_I2C0_GFCLK_SHIFT		11
+#define AM33XX_CLKACTIVITY_I2C0_GFCLK_MASK		(1 << 11)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_I2C_FCLK_SHIFT		24
+#define AM33XX_CLKACTIVITY_I2C_FCLK_MASK		(1 << 24)
+
+/* Used by CM_PER_PRUSS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_SHIFT		5
+#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_MASK		(1 << 5)
+
+/* Used by CM_PER_PRUSS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_SHIFT		4
+#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_MASK		(1 << 4)
+
+/* Used by CM_PER_PRUSS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_SHIFT	6
+#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_MASK		(1 << 6)
+
+/* Used by CM_PER_L3S_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L3S_GCLK_SHIFT		3
+#define AM33XX_CLKACTIVITY_L3S_GCLK_MASK		(1 << 3)
+
+/* Used by CM_L3_AON_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L3_AON_GCLK_SHIFT		3
+#define AM33XX_CLKACTIVITY_L3_AON_GCLK_MASK		(1 << 3)
+
+/* Used by CM_PER_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L3_GCLK_SHIFT		4
+#define AM33XX_CLKACTIVITY_L3_GCLK_MASK			(1 << 4)
+
+/* Used by CM_PER_L4FW_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4FW_GCLK_SHIFT		8
+#define AM33XX_CLKACTIVITY_L4FW_GCLK_MASK		(1 << 8)
+
+/* Used by CM_PER_L4HS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4HS_GCLK_SHIFT		3
+#define AM33XX_CLKACTIVITY_L4HS_GCLK_MASK		(1 << 3)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4LS_GCLK_SHIFT		8
+#define AM33XX_CLKACTIVITY_L4LS_GCLK_MASK		(1 << 8)
+
+/* Used by CM_GFX_L4LS_GFX_CLKSTCTRL__1 */
+#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_SHIFT		8
+#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_MASK		(1 << 8)
+
+/* Used by CM_CEFUSE_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT	8
+#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_MASK		(1 << 8)
+
+/* Used by CM_RTC_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_SHIFT		8
+#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_MASK		(1 << 8)
+
+/* Used by CM_L4_WKUP_AON_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_SHIFT	2
+#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_MASK	(1 << 2)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_SHIFT		2
+#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_MASK		(1 << 2)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_LCDC_GCLK_SHIFT		17
+#define AM33XX_CLKACTIVITY_LCDC_GCLK_MASK		(1 << 17)
+
+/* Used by CM_PER_LCDC_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_SHIFT	4
+#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_MASK	(1 << 4)
+
+/* Used by CM_PER_LCDC_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_SHIFT	5
+#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_MASK	(1 << 5)
+
+/* Used by CM_PER_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_MCASP_GCLK_SHIFT		7
+#define AM33XX_CLKACTIVITY_MCASP_GCLK_MASK		(1 << 7)
+
+/* Used by CM_PER_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_MMC_FCLK_SHIFT		3
+#define AM33XX_CLKACTIVITY_MMC_FCLK_MASK		(1 << 3)
+
+/* Used by CM_MPU_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_MPU_CLK_SHIFT		2
+#define AM33XX_CLKACTIVITY_MPU_CLK_MASK			(1 << 2)
+
+/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_SHIFT		4
+#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_MASK		(1 << 4)
+
+/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_SHIFT		5
+#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_MASK		(1 << 5)
+
+/* Used by CM_RTC_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_RTC_32KCLK_SHIFT		9
+#define AM33XX_CLKACTIVITY_RTC_32KCLK_MASK		(1 << 9)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_SPI_GCLK_SHIFT		25
+#define AM33XX_CLKACTIVITY_SPI_GCLK_MASK		(1 << 25)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_SR_SYSCLK_SHIFT		3
+#define AM33XX_CLKACTIVITY_SR_SYSCLK_MASK		(1 << 3)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER0_GCLK_SHIFT		10
+#define AM33XX_CLKACTIVITY_TIMER0_GCLK_MASK		(1 << 10)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER1_GCLK_SHIFT		13
+#define AM33XX_CLKACTIVITY_TIMER1_GCLK_MASK		(1 << 13)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER2_GCLK_SHIFT		14
+#define AM33XX_CLKACTIVITY_TIMER2_GCLK_MASK		(1 << 14)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER3_GCLK_SHIFT		15
+#define AM33XX_CLKACTIVITY_TIMER3_GCLK_MASK		(1 << 15)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER4_GCLK_SHIFT		16
+#define AM33XX_CLKACTIVITY_TIMER4_GCLK_MASK		(1 << 16)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER5_GCLK_SHIFT		27
+#define AM33XX_CLKACTIVITY_TIMER5_GCLK_MASK		(1 << 27)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER6_GCLK_SHIFT		28
+#define AM33XX_CLKACTIVITY_TIMER6_GCLK_MASK		(1 << 28)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER7_GCLK_SHIFT		13
+#define AM33XX_CLKACTIVITY_TIMER7_GCLK_MASK		(1 << 13)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_UART0_GFCLK_SHIFT		12
+#define AM33XX_CLKACTIVITY_UART0_GFCLK_MASK		(1 << 12)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_UART_GFCLK_SHIFT		10
+#define AM33XX_CLKACTIVITY_UART_GFCLK_MASK		(1 << 10)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_WDT0_GCLK_SHIFT		9
+#define AM33XX_CLKACTIVITY_WDT0_GCLK_MASK		(1 << 9)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_WDT1_GCLK_SHIFT		4
+#define AM33XX_CLKACTIVITY_WDT1_GCLK_MASK		(1 << 4)
+
+/* Used by CLKSEL_GFX_FCLK */
+#define AM33XX_CLKDIV_SEL_GFX_FCLK_SHIFT		0
+#define AM33XX_CLKDIV_SEL_GFX_FCLK_MASK			(1 << 0)
+
+/* Used by CM_CLKOUT_CTRL */
+#define AM33XX_CLKOUT2DIV_SHIFT				3
+#define AM33XX_CLKOUT2DIV_MASK				(0x05 << 3)
+
+/* Used by CM_CLKOUT_CTRL */
+#define AM33XX_CLKOUT2EN_SHIFT				7
+#define AM33XX_CLKOUT2EN_MASK				(1 << 7)
+
+/* Used by CM_CLKOUT_CTRL */
+#define AM33XX_CLKOUT2SOURCE_SHIFT			0
+#define AM33XX_CLKOUT2SOURCE_MASK			(0x02 << 0)
+
+/*
+ * Used by CLKSEL_GPIO0_DBCLK, CLKSEL_LCDC_PIXEL_CLK, CLKSEL_TIMER2_CLK,
+ * CLKSEL_TIMER3_CLK, CLKSEL_TIMER4_CLK, CLKSEL_TIMER5_CLK, CLKSEL_TIMER6_CLK,
+ * CLKSEL_TIMER7_CLK
+ */
+#define AM33XX_CLKSEL_SHIFT				0
+#define AM33XX_CLKSEL_MASK				(0x01 << 0)
+
+/*
+ * Renamed from CLKSEL Used by CLKSEL_PRUSS_OCP_CLK, CLKSEL_WDT1_CLK,
+ * CM_CPTS_RFT_CLKSEL
+ */
+#define AM33XX_CLKSEL_0_0_SHIFT				0
+#define AM33XX_CLKSEL_0_0_MASK				(1 << 0)
+
+#define AM33XX_CLKSEL_0_1_SHIFT				0
+#define AM33XX_CLKSEL_0_1_MASK				(3 << 0)
+
+/* Renamed from CLKSEL Used by CLKSEL_TIMER1MS_CLK */
+#define AM33XX_CLKSEL_0_2_SHIFT				0
+#define AM33XX_CLKSEL_0_2_MASK				(7 << 0)
+
+/* Used by CLKSEL_GFX_FCLK */
+#define AM33XX_CLKSEL_GFX_FCLK_SHIFT			1
+#define AM33XX_CLKSEL_GFX_FCLK_MASK			(1 << 1)
+
+/*
+ * Used by CM_MPU_CLKSTCTRL, CM_RTC_CLKSTCTRL, CM_PER_CLK_24MHZ_CLKSTCTRL,
+ * CM_PER_CPSW_CLKSTCTRL, CM_PER_PRUSS_CLKSTCTRL, CM_PER_L3S_CLKSTCTRL,
+ * CM_PER_L3_CLKSTCTRL, CM_PER_L4FW_CLKSTCTRL, CM_PER_L4HS_CLKSTCTRL,
+ * CM_PER_L4LS_CLKSTCTRL, CM_PER_LCDC_CLKSTCTRL, CM_PER_OCPWP_L3_CLKSTCTRL,
+ * CM_L3_AON_CLKSTCTRL, CM_L4_WKUP_AON_CLKSTCTRL, CM_WKUP_CLKSTCTRL,
+ * CM_GFX_L3_CLKSTCTRL, CM_GFX_L4LS_GFX_CLKSTCTRL__1, CM_CEFUSE_CLKSTCTRL
+ */
+#define AM33XX_CLKTRCTRL_SHIFT				0
+#define AM33XX_CLKTRCTRL_MASK				(0x3 << 0)
+
+/*
+ * Used by CM_SSC_DELTAMSTEP_DPLL_CORE, CM_SSC_DELTAMSTEP_DPLL_DDR,
+ * CM_SSC_DELTAMSTEP_DPLL_DISP, CM_SSC_DELTAMSTEP_DPLL_MPU,
+ * CM_SSC_DELTAMSTEP_DPLL_PER
+ */
+#define AM33XX_DELTAMSTEP_SHIFT				0
+#define AM33XX_DELTAMSTEP_MASK				(0x19 << 0)
+
+/* Used by CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP, CM_CLKSEL_DPLL_MPU */
+#define AM33XX_DPLL_BYP_CLKSEL_SHIFT			23
+#define AM33XX_DPLL_BYP_CLKSEL_MASK			(1 << 23)
+
+/* Used by CM_CLKDCOLDO_DPLL_PER */
+#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT		8
+#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_MASK		(1 << 8)
+
+/* Used by CM_CLKDCOLDO_DPLL_PER */
+#define AM33XX_DPLL_CLKDCOLDO_PWDN_SHIFT		12
+#define AM33XX_DPLL_CLKDCOLDO_PWDN_MASK			(1 << 12)
+
+/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */
+#define AM33XX_DPLL_CLKOUT_DIV_SHIFT			0
+#define AM33XX_DPLL_CLKOUT_DIV_MASK			(0x1f << 0)
+
+/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_PER */
+#define AM33XX_DPLL_CLKOUT_DIV_0_6_SHIFT		0
+#define AM33XX_DPLL_CLKOUT_DIV_0_6_MASK			(0x06 << 0)
+
+/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_SHIFT		5
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_MASK		(1 << 5)
+
+/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_PER */
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_SHIFT	7
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_MASK		(1 << 7)
+
+/*
+ * Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU,
+ * CM_DIV_M2_DPLL_PER
+ */
+#define AM33XX_DPLL_CLKOUT_GATE_CTRL_SHIFT		8
+#define AM33XX_DPLL_CLKOUT_GATE_CTRL_MASK		(1 << 8)
+
+/*
+ * Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP,
+ * CM_CLKSEL_DPLL_MPU
+ */
+#define AM33XX_DPLL_DIV_SHIFT				0
+#define AM33XX_DPLL_DIV_MASK				(0x7f << 0)
+
+#define AM33XX_DPLL_PER_DIV_MASK			(0xff << 0)
+
+/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_PERIPH */
+#define AM33XX_DPLL_DIV_0_7_SHIFT			0
+#define AM33XX_DPLL_DIV_0_7_MASK			(0x07 << 0)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU
+ */
+#define AM33XX_DPLL_DRIFTGUARD_EN_SHIFT			8
+#define AM33XX_DPLL_DRIFTGUARD_EN_MASK			(1 << 8)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
+ */
+#define AM33XX_DPLL_EN_SHIFT				0
+#define AM33XX_DPLL_EN_MASK				(0x7 << 0)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU
+ */
+#define AM33XX_DPLL_LPMODE_EN_SHIFT			10
+#define AM33XX_DPLL_LPMODE_EN_MASK			(1 << 10)
+
+/*
+ * Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP,
+ * CM_CLKSEL_DPLL_MPU
+ */
+#define AM33XX_DPLL_MULT_SHIFT				8
+#define AM33XX_DPLL_MULT_MASK				(0x7ff << 8)
+
+/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_PERIPH */
+#define AM33XX_DPLL_MULT_PERIPH_SHIFT			8
+#define AM33XX_DPLL_MULT_PERIPH_MASK			(0xfff << 8)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU
+ */
+#define AM33XX_DPLL_REGM4XEN_SHIFT			11
+#define AM33XX_DPLL_REGM4XEN_MASK			(1 << 11)
+
+/* Used by CM_CLKSEL_DPLL_PERIPH */
+#define AM33XX_DPLL_SD_DIV_SHIFT			24
+#define AM33XX_DPLL_SD_DIV_MASK				(24, 31)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
+ */
+#define AM33XX_DPLL_SSC_ACK_SHIFT			13
+#define AM33XX_DPLL_SSC_ACK_MASK			(1 << 13)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
+ */
+#define AM33XX_DPLL_SSC_DOWNSPREAD_SHIFT		14
+#define AM33XX_DPLL_SSC_DOWNSPREAD_MASK			(1 << 14)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
+ */
+#define AM33XX_DPLL_SSC_EN_SHIFT			12
+#define AM33XX_DPLL_SSC_EN_MASK				(1 << 12)
+
+/* Used by CM_DIV_M4_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT1_DIV_SHIFT		0
+#define AM33XX_HSDIVIDER_CLKOUT1_DIV_MASK		(0x1f << 0)
+
+/* Used by CM_DIV_M4_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT		5
+#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_MASK		(1 << 5)
+
+/* Used by CM_DIV_M4_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT	8
+#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK		(1 << 8)
+
+/* Used by CM_DIV_M4_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_SHIFT		12
+#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_MASK		(1 << 12)
+
+/* Used by CM_DIV_M5_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT2_DIV_SHIFT		0
+#define AM33XX_HSDIVIDER_CLKOUT2_DIV_MASK		(0x1f << 0)
+
+/* Used by CM_DIV_M5_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT		5
+#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_MASK		(1 << 5)
+
+/* Used by CM_DIV_M5_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT	8
+#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK		(1 << 8)
+
+/* Used by CM_DIV_M5_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_SHIFT		12
+#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_MASK		(1 << 12)
+
+/* Used by CM_DIV_M6_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT3_DIV_SHIFT		0
+#define AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK		(0x04 << 0)
+
+/* Used by CM_DIV_M6_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT		5
+#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_MASK		(1 << 5)
+
+/* Used by CM_DIV_M6_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT	8
+#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK		(1 << 8)
+
+/* Used by CM_DIV_M6_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_SHIFT		12
+#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_MASK		(1 << 12)
+
+/*
+ * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL,
+ * CM_PER_AES1_CLKCTRL, CM_PER_CLKDIV32K_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL,
+ * CM_PER_DCAN0_CLKCTRL, CM_PER_DCAN1_CLKCTRL, CM_PER_DES_CLKCTRL,
+ * CM_PER_ELM_CLKCTRL, CM_PER_EMIF_CLKCTRL, CM_PER_EMIF_FW_CLKCTRL,
+ * CM_PER_EPWMSS0_CLKCTRL, CM_PER_EPWMSS1_CLKCTRL, CM_PER_EPWMSS2_CLKCTRL,
+ * CM_PER_GPIO1_CLKCTRL, CM_PER_GPIO2_CLKCTRL, CM_PER_GPIO3_CLKCTRL,
+ * CM_PER_GPIO4_CLKCTRL, CM_PER_GPIO5_CLKCTRL, CM_PER_GPIO6_CLKCTRL,
+ * CM_PER_GPMC_CLKCTRL, CM_PER_I2C1_CLKCTRL, CM_PER_I2C2_CLKCTRL,
+ * CM_PER_PRUSS_CLKCTRL, CM_PER_IEEE5000_CLKCTRL, CM_PER_L3_CLKCTRL,
+ * CM_PER_L3_INSTR_CLKCTRL, CM_PER_L4FW_CLKCTRL, CM_PER_L4HS_CLKCTRL,
+ * CM_PER_L4LS_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MAILBOX0_CLKCTRL,
+ * CM_PER_MAILBOX1_CLKCTRL, CM_PER_MCASP0_CLKCTRL, CM_PER_MCASP1_CLKCTRL,
+ * CM_PER_MCASP2_CLKCTRL, CM_PER_MLB_CLKCTRL, CM_PER_MMC0_CLKCTRL,
+ * CM_PER_MMC1_CLKCTRL, CM_PER_MMC2_CLKCTRL, CM_PER_MSTR_EXPS_CLKCTRL,
+ * CM_PER_OCMCRAM_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL,
+ * CM_PER_PKA_CLKCTRL, CM_PER_RNG_CLKCTRL, CM_PER_SHA0_CLKCTRL,
+ * CM_PER_SLV_EXPS_CLKCTRL, CM_PER_SPARE0_CLKCTRL, CM_PER_SPARE1_CLKCTRL,
+ * CM_PER_SPARE_CLKCTRL, CM_PER_SPI0_CLKCTRL, CM_PER_SPI1_CLKCTRL,
+ * CM_PER_SPI2_CLKCTRL, CM_PER_SPI3_CLKCTRL, CM_PER_SPINLOCK_CLKCTRL,
+ * CM_PER_TIMER2_CLKCTRL, CM_PER_TIMER3_CLKCTRL, CM_PER_TIMER4_CLKCTRL,
+ * CM_PER_TIMER5_CLKCTRL, CM_PER_TIMER6_CLKCTRL, CM_PER_TIMER7_CLKCTRL,
+ * CM_PER_TPCC_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL,
+ * CM_PER_TPTC2_CLKCTRL, CM_PER_UART1_CLKCTRL, CM_PER_UART2_CLKCTRL,
+ * CM_PER_UART3_CLKCTRL, CM_PER_UART4_CLKCTRL, CM_PER_UART5_CLKCTRL,
+ * CM_PER_USB0_CLKCTRL, CM_WKUP_ADC_TSC_CLKCTRL, CM_WKUP_CONTROL_CLKCTRL,
+ * CM_WKUP_DEBUGSS_CLKCTRL, CM_WKUP_GPIO0_CLKCTRL, CM_WKUP_I2C0_CLKCTRL,
+ * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SMARTREFLEX0_CLKCTRL,
+ * CM_WKUP_SMARTREFLEX1_CLKCTRL, CM_WKUP_TIMER0_CLKCTRL,
+ * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_UART0_CLKCTRL, CM_WKUP_WDT0_CLKCTRL,
+ * CM_WKUP_WDT1_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL,
+ * CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL
+ */
+#define AM33XX_IDLEST_SHIFT				16
+#define AM33XX_IDLEST_MASK				(0x3 << 16)
+#define AM33XX_IDLEST_VAL				0x3
+
+/* Used by CM_MAC_CLKSEL */
+#define AM33XX_MII_CLK_SEL_SHIFT			2
+#define AM33XX_MII_CLK_SEL_MASK				(1 << 2)
+
+/*
+ * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR,
+ * CM_SSC_MODFREQDIV_DPLL_DISP, CM_SSC_MODFREQDIV_DPLL_MPU,
+ * CM_SSC_MODFREQDIV_DPLL_PER
+ */
+#define AM33XX_MODFREQDIV_EXPONENT_SHIFT		8
+#define AM33XX_MODFREQDIV_EXPONENT_MASK			(0x10 << 8)
+
+/*
+ * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR,
+ * CM_SSC_MODFREQDIV_DPLL_DISP, CM_SSC_MODFREQDIV_DPLL_MPU,
+ * CM_SSC_MODFREQDIV_DPLL_PER
+ */
+#define AM33XX_MODFREQDIV_MANTISSA_SHIFT		0
+#define AM33XX_MODFREQDIV_MANTISSA_MASK			(0x06 << 0)
+
+/*
+ * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL,
+ * CM_PER_AES1_CLKCTRL, CM_PER_CLKDIV32K_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL,
+ * CM_PER_DCAN0_CLKCTRL, CM_PER_DCAN1_CLKCTRL, CM_PER_DES_CLKCTRL,
+ * CM_PER_ELM_CLKCTRL, CM_PER_EMIF_CLKCTRL, CM_PER_EMIF_FW_CLKCTRL,
+ * CM_PER_EPWMSS0_CLKCTRL, CM_PER_EPWMSS1_CLKCTRL, CM_PER_EPWMSS2_CLKCTRL,
+ * CM_PER_GPIO1_CLKCTRL, CM_PER_GPIO2_CLKCTRL, CM_PER_GPIO3_CLKCTRL,
+ * CM_PER_GPIO4_CLKCTRL, CM_PER_GPIO5_CLKCTRL, CM_PER_GPIO6_CLKCTRL,
+ * CM_PER_GPMC_CLKCTRL, CM_PER_I2C1_CLKCTRL, CM_PER_I2C2_CLKCTRL,
+ * CM_PER_PRUSS_CLKCTRL, CM_PER_IEEE5000_CLKCTRL, CM_PER_L3_CLKCTRL,
+ * CM_PER_L3_INSTR_CLKCTRL, CM_PER_L4FW_CLKCTRL, CM_PER_L4HS_CLKCTRL,
+ * CM_PER_L4LS_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MAILBOX0_CLKCTRL,
+ * CM_PER_MAILBOX1_CLKCTRL, CM_PER_MCASP0_CLKCTRL, CM_PER_MCASP1_CLKCTRL,
+ * CM_PER_MCASP2_CLKCTRL, CM_PER_MLB_CLKCTRL, CM_PER_MMC0_CLKCTRL,
+ * CM_PER_MMC1_CLKCTRL, CM_PER_MMC2_CLKCTRL, CM_PER_MSTR_EXPS_CLKCTRL,
+ * CM_PER_OCMCRAM_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL,
+ * CM_PER_PKA_CLKCTRL, CM_PER_RNG_CLKCTRL, CM_PER_SHA0_CLKCTRL,
+ * CM_PER_SLV_EXPS_CLKCTRL, CM_PER_SPARE0_CLKCTRL, CM_PER_SPARE1_CLKCTRL,
+ * CM_PER_SPARE_CLKCTRL, CM_PER_SPI0_CLKCTRL, CM_PER_SPI1_CLKCTRL,
+ * CM_PER_SPI2_CLKCTRL, CM_PER_SPI3_CLKCTRL, CM_PER_SPINLOCK_CLKCTRL,
+ * CM_PER_TIMER2_CLKCTRL, CM_PER_TIMER3_CLKCTRL, CM_PER_TIMER4_CLKCTRL,
+ * CM_PER_TIMER5_CLKCTRL, CM_PER_TIMER6_CLKCTRL, CM_PER_TIMER7_CLKCTRL,
+ * CM_PER_TPCC_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL,
+ * CM_PER_TPTC2_CLKCTRL, CM_PER_UART1_CLKCTRL, CM_PER_UART2_CLKCTRL,
+ * CM_PER_UART3_CLKCTRL, CM_PER_UART4_CLKCTRL, CM_PER_UART5_CLKCTRL,
+ * CM_PER_USB0_CLKCTRL, CM_WKUP_ADC_TSC_CLKCTRL, CM_WKUP_CONTROL_CLKCTRL,
+ * CM_WKUP_DEBUGSS_CLKCTRL, CM_WKUP_GPIO0_CLKCTRL, CM_WKUP_I2C0_CLKCTRL,
+ * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SMARTREFLEX0_CLKCTRL,
+ * CM_WKUP_SMARTREFLEX1_CLKCTRL, CM_WKUP_TIMER0_CLKCTRL,
+ * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_UART0_CLKCTRL, CM_WKUP_WDT0_CLKCTRL,
+ * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL,
+ * CM_GFX_GFX_CLKCTRL, CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL,
+ * CM_CEFUSE_CEFUSE_CLKCTRL
+ */
+#define AM33XX_MODULEMODE_SHIFT				0
+#define AM33XX_MODULEMODE_MASK				(0x3 << 0)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_OPTCLK_DEBUG_CLKA_SHIFT			30
+#define AM33XX_OPTCLK_DEBUG_CLKA_MASK			(1 << 30)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT		19
+#define AM33XX_OPTFCLKEN_DBGSYSCLK_MASK			(1 << 19)
+
+/* Used by CM_WKUP_GPIO0_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_MASK		(1 << 18)
+
+/* Used by CM_PER_GPIO1_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_MASK		(1 << 18)
+
+/* Used by CM_PER_GPIO2_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_MASK		(1 << 18)
+
+/* Used by CM_PER_GPIO3_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_MASK		(1 << 18)
+
+/* Used by CM_PER_GPIO4_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_MASK		(1 << 18)
+
+/* Used by CM_PER_GPIO5_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_MASK		(1 << 18)
+
+/* Used by CM_PER_GPIO6_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_MASK		(1 << 18)
+
+/*
+ * Used by CM_MPU_MPU_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL, CM_PER_PRUSS_CLKCTRL,
+ * CM_PER_IEEE5000_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MLB_CLKCTRL,
+ * CM_PER_MSTR_EXPS_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL,
+ * CM_PER_SPARE_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL,
+ * CM_PER_TPTC2_CLKCTRL, CM_PER_USB0_CLKCTRL, CM_WKUP_DEBUGSS_CLKCTRL,
+ * CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL
+ */
+#define AM33XX_STBYST_SHIFT				18
+#define AM33XX_STBYST_MASK				(1 << 18)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_STM_PMD_CLKDIVSEL_SHIFT			27
+#define AM33XX_STM_PMD_CLKDIVSEL_MASK			(0x29 << 27)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_STM_PMD_CLKSEL_SHIFT			22
+#define AM33XX_STM_PMD_CLKSEL_MASK			(0x23 << 22)
+
+/*
+ * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP,
+ * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER
+ */
+#define AM33XX_ST_DPLL_CLK_SHIFT			0
+#define AM33XX_ST_DPLL_CLK_MASK				(1 << 0)
+
+/* Used by CM_CLKDCOLDO_DPLL_PER */
+#define AM33XX_ST_DPLL_CLKDCOLDO_SHIFT			8
+#define AM33XX_ST_DPLL_CLKDCOLDO_MASK			(1 << 8)
+
+/*
+ * Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU,
+ * CM_DIV_M2_DPLL_PER
+ */
+#define AM33XX_ST_DPLL_CLKOUT_SHIFT			9
+#define AM33XX_ST_DPLL_CLKOUT_MASK			(1 << 9)
+
+/* Used by CM_DIV_M4_DPLL_CORE */
+#define AM33XX_ST_HSDIVIDER_CLKOUT1_SHIFT		9
+#define AM33XX_ST_HSDIVIDER_CLKOUT1_MASK		(1 << 9)
+
+/* Used by CM_DIV_M5_DPLL_CORE */
+#define AM33XX_ST_HSDIVIDER_CLKOUT2_SHIFT		9
+#define AM33XX_ST_HSDIVIDER_CLKOUT2_MASK		(1 << 9)
+
+/* Used by CM_DIV_M6_DPLL_CORE */
+#define AM33XX_ST_HSDIVIDER_CLKOUT3_SHIFT		9
+#define AM33XX_ST_HSDIVIDER_CLKOUT3_MASK		(1 << 9)
+
+/*
+ * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP,
+ * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER
+ */
+#define AM33XX_ST_MN_BYPASS_SHIFT			8
+#define AM33XX_ST_MN_BYPASS_MASK			(1 << 8)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_TRC_PMD_CLKDIVSEL_SHIFT			24
+#define AM33XX_TRC_PMD_CLKDIVSEL_MASK			(0x26 << 24)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_TRC_PMD_CLKSEL_SHIFT			20
+#define AM33XX_TRC_PMD_CLKSEL_MASK			(0x21 << 20)
+
+/* Used by CONTROL_SEC_CLK_CTRL */
+#define AM33XX_TIMER0_CLKSEL_MASK			(0x3 << 4)
+#endif

arch/arm/mach-omap2/cm33xx.c

+/*
+ * AM33XX CM functions
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Reference taken from from OMAP4 cminst44xx.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+
+#include "cm.h"
+#include "cm33xx.h"
+#include "cm-regbits-34xx.h"
+#include "cm-regbits-33xx.h"
+#include "prm33xx.h"
+
+/*
+ * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield:
+ *
+ *   0x0 func:     Module is fully functional, including OCP
+ *   0x1 trans:    Module is performing transition: wakeup, or sleep, or sleep
+ *                 abortion
+ *   0x2 idle:     Module is in Idle mode (only OCP part). It is functional if
+ *                 using separate functional clock
+ *   0x3 disabled: Module is disabled and cannot be accessed
+ *
+ */
+#define CLKCTRL_IDLEST_FUNCTIONAL		0x0
+#define CLKCTRL_IDLEST_INTRANSITION		0x1
+#define CLKCTRL_IDLEST_INTERFACE_IDLE		0x2
+#define CLKCTRL_IDLEST_DISABLED			0x3
+
+/* Private functions */
+
+/* Read a register in a CM instance */
+static inline u32 am33xx_cm_read_reg(s16 inst, u16 idx)
+{
+	return __raw_readl(cm_base + inst + idx);
+}
+
+/* Write into a register in a CM */
+static inline void am33xx_cm_write_reg(u32 val, s16 inst, u16 idx)
+{
+	__raw_writel(val, cm_base + inst + idx);
+}
+
+/* Read-modify-write a register in CM */
+static inline u32 am33xx_cm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
+{
+	u32 v;
+
+	v = am33xx_cm_read_reg(inst, idx);
+	v &= ~mask;
+	v |= bits;
+	am33xx_cm_write_reg(v, inst, idx);
+
+	return v;
+}
+
+static inline u32 am33xx_cm_set_reg_bits(u32 bits, s16 inst, s16 idx)
+{
+	return am33xx_cm_rmw_reg_bits(bits, bits, inst, idx);
+}
+
+static inline u32 am33xx_cm_clear_reg_bits(u32 bits, s16 inst, s16 idx)
+{
+	return am33xx_cm_rmw_reg_bits(bits, 0x0, inst, idx);
+}
+
+static inline u32 am33xx_cm_read_reg_bits(u16 inst, s16 idx, u32 mask)
+{
+	u32 v;
+
+	v = am33xx_cm_read_reg(inst, idx);
+	v &= mask;
+	v >>= __ffs(mask);
+
+	return v;
+}
+
+/**
+ * _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to
+ * bit 0.
+ */
+static u32 _clkctrl_idlest(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+	u32 v = am33xx_cm_read_reg(inst, clkctrl_offs);
+	v &= AM33XX_IDLEST_MASK;
+	v >>= AM33XX_IDLEST_SHIFT;
+	return v;
+}
+
+/**
+ * _is_module_ready - can module registers be accessed without causing an abort?
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either
+ * *FUNCTIONAL or *INTERFACE_IDLE; false otherwise.
+ */
+static bool _is_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+	u32 v;
+
+	v = _clkctrl_idlest(inst, cdoffs, clkctrl_offs);
+
+	return (v == CLKCTRL_IDLEST_FUNCTIONAL ||
+		v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false;
+}
+
+/**
+ * _clktrctrl_write - write @c to a CM_CLKSTCTRL.CLKTRCTRL register bitfield
+ * @c: CLKTRCTRL register bitfield (LSB = bit 0, i.e., unshifted)
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * @c must be the unshifted value for CLKTRCTRL - i.e., this function
+ * will handle the shift itself.
+ */
+static void _clktrctrl_write(u8 c, s16 inst, u16 cdoffs)
+{
+	u32 v;
+
+	v = am33xx_cm_read_reg(inst, cdoffs);
+	v &= ~AM33XX_CLKTRCTRL_MASK;
+	v |= c << AM33XX_CLKTRCTRL_SHIFT;
+	am33xx_cm_write_reg(v, inst, cdoffs);
+}
+
+/* Public functions */
+
+/**
+ * am33xx_cm_is_clkdm_in_hwsup - is a clockdomain in hwsup idle mode?
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Returns true if the clockdomain referred to by (@inst, @cdoffs)
+ * is in hardware-supervised idle mode, or 0 otherwise.
+ */
+bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs)
+{
+	u32 v;
+
+	v = am33xx_cm_read_reg(inst, cdoffs);
+	v &= AM33XX_CLKTRCTRL_MASK;
+	v >>= AM33XX_CLKTRCTRL_SHIFT;
+
+	return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? true : false;
+}
+
+/**
+ * am33xx_cm_clkdm_enable_hwsup - put a clockdomain in hwsup-idle mode
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Put a clockdomain referred to by (@inst, @cdoffs) into
+ * hardware-supervised idle mode.  No return value.
+ */
+void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs)
+{
+	_clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, inst, cdoffs);
+}
+
+/**
+ * am33xx_cm_clkdm_disable_hwsup - put a clockdomain in swsup-idle mode
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Put a clockdomain referred to by (@inst, @cdoffs) into
+ * software-supervised idle mode, i.e., controlled manually by the
+ * Linux OMAP clockdomain code.  No return value.
+ */
+void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs)
+{
+	_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, inst, cdoffs);
+}
+
+/**
+ * am33xx_cm_clkdm_force_sleep - try to put a clockdomain into idle
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Put a clockdomain referred to by (@inst, @cdoffs) into idle
+ * No return value.
+ */
+void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs)
+{
+	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, inst, cdoffs);
+}
+
+/**
+ * am33xx_cm_clkdm_force_wakeup - try to take a clockdomain out of idle
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Take a clockdomain referred to by (@inst, @cdoffs) out of idle,
+ * waking it up.  No return value.
+ */
+void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs)
+{
+	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, inst, cdoffs);
+}
+
+/*
+ *
+ */
+
+/**
+ * am33xx_cm_wait_module_ready - wait for a module to be in 'func' state
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * Wait for the module IDLEST to be functional. If the idle state is in any
+ * the non functional state (trans, idle or disabled), module and thus the
+ * sysconfig cannot be accessed and will probably lead to an "imprecise
+ * external abort"
+ */
+int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+	int i = 0;
+
+	if (!clkctrl_offs)
+		return 0;
+
+	omap_test_timeout(_is_module_ready(inst, cdoffs, clkctrl_offs),
+			  MAX_MODULE_READY_TIME, i);
+
+	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
+/**
+ * am33xx_cm_wait_module_idle - wait for a module to be in 'disabled'
+ * state
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * Wait for the module IDLEST to be disabled. Some PRCM transition,
+ * like reset assertion or parent clock de-activation must wait the
+ * module to be fully disabled.
+ */
+int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+	int i = 0;
+
+	if (!clkctrl_offs)
+		return 0;
+
+	omap_test_timeout((_clkctrl_idlest(inst, cdoffs, clkctrl_offs) ==
+				CLKCTRL_IDLEST_DISABLED),
+				MAX_MODULE_READY_TIME, i);
+
+	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
+/**
+ * am33xx_cm_module_enable - Enable the modulemode inside CLKCTRL
+ * @mode: Module mode (SW or HW)
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * No return value.
+ */
+void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+	u32 v;
+
+	v = am33xx_cm_read_reg(inst, clkctrl_offs);
+	v &= ~AM33XX_MODULEMODE_MASK;
+	v |= mode << AM33XX_MODULEMODE_SHIFT;
+	am33xx_cm_write_reg(v, inst, clkctrl_offs);
+}
+
+/**
+ * am33xx_cm_module_disable - Disable the module inside CLKCTRL
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * No return value.
+ */
+void am33xx_cm_module_disable(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+	u32 v;
+
+	v = am33xx_cm_read_reg(inst, clkctrl_offs);
+	v &= ~AM33XX_MODULEMODE_MASK;
+	am33xx_cm_write_reg(v, inst, clkctrl_offs);
+}

arch/arm/mach-omap2/cm33xx.h

+/*
+ * AM33XX CM offset macros
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM_33XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM_33XX_H
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include "common.h"
+
+#include "cm.h"
+#include "cm-regbits-33xx.h"
+#include "cm33xx.h"
+
+/* CM base address */
+#define AM33XX_CM_BASE		0x44e00000
+
+#define AM33XX_CM_REGADDR(inst, reg)				\
+	AM33XX_L4_WK_IO_ADDRESS(AM33XX_CM_BASE + (inst) + (reg))
+
+/* CM instances */
+#define AM33XX_CM_PER_MOD		0x0000
+#define AM33XX_CM_WKUP_MOD		0x0400
+#define AM33XX_CM_DPLL_MOD		0x0500
+#define AM33XX_CM_MPU_MOD		0x0600
+#define AM33XX_CM_DEVICE_MOD		0x0700
+#define AM33XX_CM_RTC_MOD		0x0800
+#define AM33XX_CM_GFX_MOD		0x0900
+#define AM33XX_CM_CEFUSE_MOD		0x0A00
+
+/* CM */
+
+/* CM.PER_CM register offsets */
+#define AM33XX_CM_PER_L4LS_CLKSTCTRL_OFFSET		0x0000
+#define AM33XX_CM_PER_L4LS_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0000)
+#define AM33XX_CM_PER_L3S_CLKSTCTRL_OFFSET		0x0004
+#define AM33XX_CM_PER_L3S_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0004)
+#define AM33XX_CM_PER_L4FW_CLKSTCTRL_OFFSET		0x0008
+#define AM33XX_CM_PER_L4FW_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0008)
+#define AM33XX_CM_PER_L3_CLKSTCTRL_OFFSET		0x000c
+#define AM33XX_CM_PER_L3_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x000c)
+#define AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET		0x0014
+#define AM33XX_CM_PER_CPGMAC0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0014)
+#define AM33XX_CM_PER_LCDC_CLKCTRL_OFFSET		0x0018
+#define AM33XX_CM_PER_LCDC_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0018)
+#define AM33XX_CM_PER_USB0_CLKCTRL_OFFSET		0x001c
+#define AM33XX_CM_PER_USB0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x001c)
+#define AM33XX_CM_PER_MLB_CLKCTRL_OFFSET		0x0020
+#define AM33XX_CM_PER_MLB_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0020)
+#define AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET		0x0024
+#define AM33XX_CM_PER_TPTC0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0024)
+#define AM33XX_CM_PER_EMIF_CLKCTRL_OFFSET		0x0028
+#define AM33XX_CM_PER_EMIF_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0028)
+#define AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET		0x002c
+#define AM33XX_CM_PER_OCMCRAM_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x002c)
+#define AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET		0x0030
+#define AM33XX_CM_PER_GPMC_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0030)
+#define AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET		0x0034
+#define AM33XX_CM_PER_MCASP0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0034)
+#define AM33XX_CM_PER_UART5_CLKCTRL_OFFSET		0x0038
+#define AM33XX_CM_PER_UART5_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0038)
+#define AM33XX_CM_PER_MMC0_CLKCTRL_OFFSET		0x003c
+#define AM33XX_CM_PER_MMC0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x003c)
+#define AM33XX_CM_PER_ELM_CLKCTRL_OFFSET		0x0040
+#define AM33XX_CM_PER_ELM_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0040)
+#define AM33XX_CM_PER_I2C2_CLKCTRL_OFFSET		0x0044
+#define AM33XX_CM_PER_I2C2_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0044)
+#define AM33XX_CM_PER_I2C1_CLKCTRL_OFFSET		0x0048
+#define AM33XX_CM_PER_I2C1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0048)
+#define AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET		0x004c
+#define AM33XX_CM_PER_SPI0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x004c)
+#define AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET		0x0050
+#define AM33XX_CM_PER_SPI1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0050)
+#define AM33XX_CM_PER_SPI2_CLKCTRL_OFFSET		0x0054
+#define AM33XX_CM_PER_SPI2_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0054)
+#define AM33XX_CM_PER_SPI3_CLKCTRL_OFFSET		0x0058
+#define AM33XX_CM_PER_SPI3_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0058)
+#define AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET		0x0060
+#define AM33XX_CM_PER_L4LS_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0060)
+#define AM33XX_CM_PER_L4FW_CLKCTRL_OFFSET		0x0064
+#define AM33XX_CM_PER_L4FW_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0064)
+#define AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET		0x0068
+#define AM33XX_CM_PER_MCASP1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0068)
+#define AM33XX_CM_PER_UART1_CLKCTRL_OFFSET		0x006c
+#define AM33XX_CM_PER_UART1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x006c)
+#define AM33XX_CM_PER_UART2_CLKCTRL_OFFSET		0x0070
+#define AM33XX_CM_PER_UART2_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0070)
+#define AM33XX_CM_PER_UART3_CLKCTRL_OFFSET		0x0074
+#define AM33XX_CM_PER_UART3_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0074)
+#define AM33XX_CM_PER_UART4_CLKCTRL_OFFSET		0x0078
+#define AM33XX_CM_PER_UART4_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0078)
+#define AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET		0x007c
+#define AM33XX_CM_PER_TIMER7_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x007c)
+#define AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET		0x0080
+#define AM33XX_CM_PER_TIMER2_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0080)
+#define AM33XX_CM_PER_TIMER3_CLKCTRL_OFFSET		0x0084
+#define AM33XX_CM_PER_TIMER3_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0084)
+#define AM33XX_CM_PER_TIMER4_CLKCTRL_OFFSET		0x0088
+#define AM33XX_CM_PER_TIMER4_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0088)
+#define AM33XX_CM_PER_MCASP2_CLKCTRL_OFFSET		0x008c
+#define AM33XX_CM_PER_MCASP2_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x008c)
+#define AM33XX_CM_PER_RNG_CLKCTRL_OFFSET		0x0090
+#define AM33XX_CM_PER_RNG_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0090)
+#define AM33XX_CM_PER_AES0_CLKCTRL_OFFSET		0x0094
+#define AM33XX_CM_PER_AES0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0094)
+#define AM33XX_CM_PER_AES1_CLKCTRL_OFFSET		0x0098
+#define AM33XX_CM_PER_AES1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0098)
+#define AM33XX_CM_PER_DES_CLKCTRL_OFFSET		0x009c
+#define AM33XX_CM_PER_DES_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x009c)
+#define AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET		0x00a0
+#define AM33XX_CM_PER_SHA0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a0)
+#define AM33XX_CM_PER_PKA_CLKCTRL_OFFSET		0x00a4
+#define AM33XX_CM_PER_PKA_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a4)
+#define AM33XX_CM_PER_GPIO6_CLKCTRL_OFFSET		0x00a8
+#define AM33XX_CM_PER_GPIO6_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a8)
+#define AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET		0x00ac
+#define AM33XX_CM_PER_GPIO1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00ac)
+#define AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET		0x00b0
+#define AM33XX_CM_PER_GPIO2_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b0)
+#define AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET		0x00b4
+#define AM33XX_CM_PER_GPIO3_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b4)
+#define AM33XX_CM_PER_GPIO4_CLKCTRL_OFFSET		0x00b8
+#define AM33XX_CM_PER_GPIO4_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b8)
+#define AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET		0x00bc
+#define AM33XX_CM_PER_TPCC_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00bc)
+#define AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET		0x00c0
+#define AM33XX_CM_PER_DCAN0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00c0)
+#define AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET		0x00c4
+#define AM33XX_CM_PER_DCAN1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00c4)
+#define AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET		0x00cc
+#define AM33XX_CM_PER_EPWMSS1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00cc)
+#define AM33XX_CM_PER_EMIF_FW_CLKCTRL_OFFSET		0x00d0
+#define AM33XX_CM_PER_EMIF_FW_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d0)
+#define AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET		0x00d4
+#define AM33XX_CM_PER_EPWMSS0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d4)
+#define AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET		0x00d8
+#define AM33XX_CM_PER_EPWMSS2_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d8)
+#define AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET		0x00dc
+#define AM33XX_CM_PER_L3_INSTR_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00dc)
+#define AM33XX_CM_PER_L3_CLKCTRL_OFFSET			0x00e0
+#define AM33XX_CM_PER_L3_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e0)
+#define AM33XX_CM_PER_IEEE5000_CLKCTRL_OFFSET		0x00e4
+#define AM33XX_CM_PER_IEEE5000_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e4)
+#define AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET		0x00e8
+#define AM33XX_CM_PER_PRUSS_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e8)
+#define AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET		0x00ec
+#define AM33XX_CM_PER_TIMER5_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00ec)
+#define AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET		0x00f0
+#define AM33XX_CM_PER_TIMER6_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f0)
+#define AM33XX_CM_PER_MMC1_CLKCTRL_OFFSET		0x00f4
+#define AM33XX_CM_PER_MMC1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f4)
+#define AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET		0x00f8
+#define AM33XX_CM_PER_MMC2_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f8)
+#define AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET		0x00fc
+#define AM33XX_CM_PER_TPTC1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00fc)
+#define AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET		0x0100
+#define AM33XX_CM_PER_TPTC2_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0100)
+#define AM33XX_CM_PER_GPIO5_CLKCTRL_OFFSET		0x0104
+#define AM33XX_CM_PER_GPIO5_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0104)
+#define AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET		0x010c
+#define AM33XX_CM_PER_SPINLOCK_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x010c)
+#define AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET		0x0110
+#define AM33XX_CM_PER_MAILBOX0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0110)
+#define AM33XX_CM_PER_L4HS_CLKSTCTRL_OFFSET		0x011c
+#define AM33XX_CM_PER_L4HS_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x011c)
+#define AM33XX_CM_PER_L4HS_CLKCTRL_OFFSET		0x0120
+#define AM33XX_CM_PER_L4HS_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0120)
+#define AM33XX_CM_PER_MSTR_EXPS_CLKCTRL_OFFSET		0x0124
+#define AM33XX_CM_PER_MSTR_EXPS_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0124)
+#define AM33XX_CM_PER_SLV_EXPS_CLKCTRL_OFFSET		0x0128
+#define AM33XX_CM_PER_SLV_EXPS_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0128)
+#define AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL_OFFSET		0x012c
+#define AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL		AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x012c)
+#define AM33XX_CM_PER_OCPWP_CLKCTRL_OFFSET		0x0130
+#define AM33XX_CM_PER_OCPWP_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0130)
+#define AM33XX_CM_PER_MAILBOX1_CLKCTRL_OFFSET		0x0134
+#define AM33XX_CM_PER_MAILBOX1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0134)
+#define AM33XX_CM_PER_PRUSS_CLKSTCTRL_OFFSET		0x0140
+#define AM33XX_CM_PER_PRUSS_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0140)
+#define AM33XX_CM_PER_CPSW_CLKSTCTRL_OFFSET		0x0144
+#define AM33XX_CM_PER_CPSW_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0144)
+#define AM33XX_CM_PER_LCDC_CLKSTCTRL_OFFSET		0x0148
+#define AM33XX_CM_PER_LCDC_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0148)
+#define AM33XX_CM_PER_CLKDIV32K_CLKCTRL_OFFSET		0x014c
+#define AM33XX_CM_PER_CLKDIV32K_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x014c)
+#define AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL_OFFSET	0x0150
+#define AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL		AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0150)
+
+/* CM.WKUP_CM register offsets */
+#define AM33XX_CM_WKUP_CLKSTCTRL_OFFSET			0x0000
+#define AM33XX_CM_WKUP_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0000)
+#define AM33XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET		0x0004
+#define AM33XX_CM_WKUP_CONTROL_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0004)
+#define AM33XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET		0x0008
+#define AM33XX_CM_WKUP_GPIO0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0008)
+#define AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET		0x000c
+#define AM33XX_CM_WKUP_L4WKUP_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x000c)
+#define AM33XX_CM_WKUP_TIMER0_CLKCTRL_OFFSET		0x0010
+#define AM33XX_CM_WKUP_TIMER0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0010)
+#define AM33XX_CM_WKUP_DEBUGSS_CLKCTRL_OFFSET		0x0014
+#define AM33XX_CM_WKUP_DEBUGSS_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0014)
+#define AM33XX_CM_L3_AON_CLKSTCTRL_OFFSET		0x0018
+#define AM33XX_CM_L3_AON_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0018)
+#define AM33XX_CM_AUTOIDLE_DPLL_MPU_OFFSET		0x001c
+#define AM33XX_CM_AUTOIDLE_DPLL_MPU			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x001c)
+#define AM33XX_CM_IDLEST_DPLL_MPU_OFFSET		0x0020
+#define AM33XX_CM_IDLEST_DPLL_MPU			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0020)
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET	0x0024
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_MPU		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0024)
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET	0x0028
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_MPU		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0028)
+#define AM33XX_CM_CLKSEL_DPLL_MPU_OFFSET		0x002c
+#define AM33XX_CM_CLKSEL_DPLL_MPU			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x002c)
+#define AM33XX_CM_AUTOIDLE_DPLL_DDR_OFFSET		0x0030
+#define AM33XX_CM_AUTOIDLE_DPLL_DDR			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0030)
+#define AM33XX_CM_IDLEST_DPLL_DDR_OFFSET		0x0034
+#define AM33XX_CM_IDLEST_DPLL_DDR			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0034)
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DDR_OFFSET	0x0038
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DDR		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0038)
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DDR_OFFSET	0x003c
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DDR		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x003c)
+#define AM33XX_CM_CLKSEL_DPLL_DDR_OFFSET		0x0040
+#define AM33XX_CM_CLKSEL_DPLL_DDR			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0040)
+#define AM33XX_CM_AUTOIDLE_DPLL_DISP_OFFSET		0x0044
+#define AM33XX_CM_AUTOIDLE_DPLL_DISP			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0044)
+#define AM33XX_CM_IDLEST_DPLL_DISP_OFFSET		0x0048
+#define AM33XX_CM_IDLEST_DPLL_DISP			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0048)
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DISP_OFFSET	0x004c
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DISP		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x004c)
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DISP_OFFSET	0x0050
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DISP		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0050)
+#define AM33XX_CM_CLKSEL_DPLL_DISP_OFFSET		0x0054
+#define AM33XX_CM_CLKSEL_DPLL_DISP			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0054)
+#define AM33XX_CM_AUTOIDLE_DPLL_CORE_OFFSET		0x0058
+#define AM33XX_CM_AUTOIDLE_DPLL_CORE			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0058)
+#define AM33XX_CM_IDLEST_DPLL_CORE_OFFSET		0x005c
+#define AM33XX_CM_IDLEST_DPLL_CORE			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x005c)
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET	0x0060
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_CORE		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0060)
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET	0x0064
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_CORE		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0064)
+#define AM33XX_CM_CLKSEL_DPLL_CORE_OFFSET		0x0068
+#define AM33XX_CM_CLKSEL_DPLL_CORE			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0068)
+#define AM33XX_CM_AUTOIDLE_DPLL_PER_OFFSET		0x006c
+#define AM33XX_CM_AUTOIDLE_DPLL_PER			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x006c)
+#define AM33XX_CM_IDLEST_DPLL_PER_OFFSET		0x0070
+#define AM33XX_CM_IDLEST_DPLL_PER			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0070)
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET	0x0074
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_PER		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0074)
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET	0x0078
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_PER		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0078)
+#define AM33XX_CM_CLKDCOLDO_DPLL_PER_OFFSET		0x007c
+#define AM33XX_CM_CLKDCOLDO_DPLL_PER			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x007c)
+#define AM33XX_CM_DIV_M4_DPLL_CORE_OFFSET		0x0080
+#define AM33XX_CM_DIV_M4_DPLL_CORE			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0080)
+#define AM33XX_CM_DIV_M5_DPLL_CORE_OFFSET		0x0084
+#define AM33XX_CM_DIV_M5_DPLL_CORE			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0084)
+#define AM33XX_CM_CLKMODE_DPLL_MPU_OFFSET		0x0088
+#define AM33XX_CM_CLKMODE_DPLL_MPU			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0088)
+#define AM33XX_CM_CLKMODE_DPLL_PER_OFFSET		0x008c
+#define AM33XX_CM_CLKMODE_DPLL_PER			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x008c)
+#define AM33XX_CM_CLKMODE_DPLL_CORE_OFFSET		0x0090
+#define AM33XX_CM_CLKMODE_DPLL_CORE			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0090)
+#define AM33XX_CM_CLKMODE_DPLL_DDR_OFFSET		0x0094
+#define AM33XX_CM_CLKMODE_DPLL_DDR			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0094)
+#define AM33XX_CM_CLKMODE_DPLL_DISP_OFFSET		0x0098
+#define AM33XX_CM_CLKMODE_DPLL_DISP			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0098)
+#define AM33XX_CM_CLKSEL_DPLL_PERIPH_OFFSET		0x009c
+#define AM33XX_CM_CLKSEL_DPLL_PERIPH			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x009c)
+#define AM33XX_CM_DIV_M2_DPLL_DDR_OFFSET		0x00a0
+#define AM33XX_CM_DIV_M2_DPLL_DDR			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a0)
+#define AM33XX_CM_DIV_M2_DPLL_DISP_OFFSET		0x00a4
+#define AM33XX_CM_DIV_M2_DPLL_DISP			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a4)
+#define AM33XX_CM_DIV_M2_DPLL_MPU_OFFSET		0x00a8
+#define AM33XX_CM_DIV_M2_DPLL_MPU			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a8)
+#define AM33XX_CM_DIV_M2_DPLL_PER_OFFSET		0x00ac
+#define AM33XX_CM_DIV_M2_DPLL_PER			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00ac)
+#define AM33XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET		0x00b0
+#define AM33XX_CM_WKUP_WKUP_M3_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b0)
+#define AM33XX_CM_WKUP_UART0_CLKCTRL_OFFSET		0x00b4
+#define AM33XX_CM_WKUP_UART0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b4)
+#define AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET		0x00b8
+#define AM33XX_CM_WKUP_I2C0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b8)
+#define AM33XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET		0x00bc
+#define AM33XX_CM_WKUP_ADC_TSC_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00bc)
+#define AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET	0x00c0
+#define AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c0)
+#define AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET		0x00c4
+#define AM33XX_CM_WKUP_TIMER1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c4)
+#define AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET	0x00c8
+#define AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c8)
+#define AM33XX_CM_L4_WKUP_AON_CLKSTCTRL_OFFSET		0x00cc
+#define AM33XX_CM_L4_WKUP_AON_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00cc)
+#define AM33XX_CM_WKUP_WDT0_CLKCTRL_OFFSET		0x00d0
+#define AM33XX_CM_WKUP_WDT0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d0)
+#define AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET		0x00d4
+#define AM33XX_CM_WKUP_WDT1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d4)
+#define AM33XX_CM_DIV_M6_DPLL_CORE_OFFSET		0x00d8
+#define AM33XX_CM_DIV_M6_DPLL_CORE			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d8)
+
+/* CM.DPLL_CM register offsets */
+#define AM33XX_CLKSEL_TIMER7_CLK_OFFSET			0x0004
+#define AM33XX_CLKSEL_TIMER7_CLK			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0004)
+#define AM33XX_CLKSEL_TIMER2_CLK_OFFSET			0x0008
+#define AM33XX_CLKSEL_TIMER2_CLK			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0008)
+#define AM33XX_CLKSEL_TIMER3_CLK_OFFSET			0x000c
+#define AM33XX_CLKSEL_TIMER3_CLK			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x000c)
+#define AM33XX_CLKSEL_TIMER4_CLK_OFFSET			0x0010
+#define AM33XX_CLKSEL_TIMER4_CLK			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0010)
+#define AM33XX_CM_MAC_CLKSEL_OFFSET			0x0014
+#define AM33XX_CM_MAC_CLKSEL				AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0014)
+#define AM33XX_CLKSEL_TIMER5_CLK_OFFSET			0x0018
+#define AM33XX_CLKSEL_TIMER5_CLK			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0018)
+#define AM33XX_CLKSEL_TIMER6_CLK_OFFSET			0x001c
+#define AM33XX_CLKSEL_TIMER6_CLK			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x001c)
+#define AM33XX_CM_CPTS_RFT_CLKSEL_OFFSET		0x0020
+#define AM33XX_CM_CPTS_RFT_CLKSEL			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0020)
+#define AM33XX_CLKSEL_TIMER1MS_CLK_OFFSET		0x0028
+#define AM33XX_CLKSEL_TIMER1MS_CLK			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0028)
+#define AM33XX_CLKSEL_GFX_FCLK_OFFSET			0x002c
+#define AM33XX_CLKSEL_GFX_FCLK				AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x002c)
+#define AM33XX_CLKSEL_PRUSS_OCP_CLK_OFFSET		0x0030
+#define AM33XX_CLKSEL_PRUSS_OCP_CLK			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0030)
+#define AM33XX_CLKSEL_LCDC_PIXEL_CLK_OFFSET		0x0034
+#define AM33XX_CLKSEL_LCDC_PIXEL_CLK			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0034)
+#define AM33XX_CLKSEL_WDT1_CLK_OFFSET			0x0038
+#define AM33XX_CLKSEL_WDT1_CLK				AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0038)
+#define AM33XX_CLKSEL_GPIO0_DBCLK_OFFSET		0x003c
+#define AM33XX_CLKSEL_GPIO0_DBCLK			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x003c)
+
+/* CM.MPU_CM register offsets */
+#define AM33XX_CM_MPU_CLKSTCTRL_OFFSET			0x0000
+#define AM33XX_CM_MPU_CLKSTCTRL				AM33XX_CM_REGADDR(AM33XX_CM_MPU_MOD, 0x0000)
+#define AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET		0x0004
+#define AM33XX_CM_MPU_MPU_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_MPU_MOD, 0x0004)
+
+/* CM.DEVICE_CM register offsets */
+#define AM33XX_CM_CLKOUT_CTRL_OFFSET			0x0000
+#define AM33XX_CM_CLKOUT_CTRL				AM33XX_CM_REGADDR(AM33XX_CM_DEVICE_MOD, 0x0000)
+
+/* CM.RTC_CM register offsets */
+#define AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET		0x0000
+#define AM33XX_CM_RTC_RTC_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_RTC_MOD, 0x0000)
+#define AM33XX_CM_RTC_CLKSTCTRL_OFFSET			0x0004
+#define AM33XX_CM_RTC_CLKSTCTRL				AM33XX_CM_REGADDR(AM33XX_CM_RTC_MOD, 0x0004)
+
+/* CM.GFX_CM register offsets */
+#define AM33XX_CM_GFX_L3_CLKSTCTRL_OFFSET		0x0000
+#define AM33XX_CM_GFX_L3_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0000)
+#define AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET		0x0004
+#define AM33XX_CM_GFX_GFX_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0004)
+#define AM33XX_CM_GFX_BITBLT_CLKCTRL_OFFSET		0x0008
+#define AM33XX_CM_GFX_BITBLT_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0008)
+#define AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1_OFFSET	0x000c
+#define AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1		AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x000c)
+#define AM33XX_CM_GFX_MMUCFG_CLKCTRL_OFFSET		0x0010
+#define AM33XX_CM_GFX_MMUCFG_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0010)
+#define AM33XX_CM_GFX_MMUDATA_CLKCTRL_OFFSET		0x0014
+#define AM33XX_CM_GFX_MMUDATA_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0014)
+
+/* CM.CEFUSE_CM register offsets */
+#define AM33XX_CM_CEFUSE_CLKSTCTRL_OFFSET		0x0000
+#define AM33XX_CM_CEFUSE_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_CEFUSE_MOD, 0x0000)
+#define AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET		0x0020
+#define AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_CEFUSE_MOD, 0x0020)
+
+
+extern bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs);
+extern void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs);
+extern void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs);
+extern void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs);
+extern void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs);
+
+#ifdef CONFIG_SOC_AM33XX
+extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
+					u16 clkctrl_offs);
+extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,
+					u16 clkctrl_offs);
+extern void am33xx_cm_module_disable(u16 inst, s16 cdoffs,
+					u16 clkctrl_offs);
+extern int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs,
+					u16 clkctrl_offs);
+#else
+static inline int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
+					u16 clkctrl_offs)
+{
+	return 0;
+}
+static inline void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,
+					u16 clkctrl_offs)
+{
+}
+static inline void am33xx_cm_module_disable(u16 inst, s16 cdoffs,
+					u16 clkctrl_offs)
+{
+}
+static inline int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs,
+					u16 clkctrl_offs)
+{
+	return 0;
+}
+#endif
+
+#endif

arch/arm/mach-omap2/cminst44xx.c

@@ -234,20 +234,6 @@ void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs)
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, part, inst, cdoffs);
 }
 
-/**
- * omap4_cminst_clkdm_force_sleep - try to put a clockdomain into idle
- * @part: PRCM partition ID that the clockdomain registers exist in
- * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
- *
- * Put a clockdomain referred to by (@part, @inst, @cdoffs) into idle
- * No return value.
- */
-void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs)
-{
-	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, part, inst, cdoffs);
-}
-
 /**
  * omap4_cminst_clkdm_force_sleep - try to take a clockdomain out of idle
  * @part: PRCM partition ID that the clockdomain registers exist in

arch/arm/mach-omap2/cminst44xx.h

@@ -16,38 +16,13 @@ extern void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs);
 extern void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs);
 extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs);
 extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs);
-
 extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
-
-# ifdef CONFIG_ARCH_OMAP4
 extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
 					 u16 clkctrl_offs);
-
 extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
 				       u16 clkctrl_offs);
 extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
 					u16 clkctrl_offs);
-
-# else
-
-static inline int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
-					u16 clkctrl_offs)
-{
-	return 0;
-}
-
-static inline void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
-				s16 cdoffs, u16 clkctrl_offs)
-{
-}
-
-static inline void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
-				 u16 clkctrl_offs)
-{
-}
-
-# endif
-
 /*
  * In an ideal world, we would not export these low-level functions,
  * but this will probably take some time to fix properly

arch/arm/mach-omap2/common.c

@@ -29,8 +29,6 @@
 
 /* Global address base setup code */
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-
 static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
 {
 	omap2_set_globals_tap(omap2_globals);
@@ -39,8 +37,6 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
 	omap2_set_globals_prcm(omap2_globals);
 }
 
-#endif
-
 #if defined(CONFIG_SOC_OMAP2420)
 
 static struct omap_globals omap242x_globals = {
@@ -134,7 +130,9 @@ void __init ti81xx_map_io(void)
 {
 	omapti81xx_map_common_io();
 }
+#endif
 
+#if defined(CONFIG_SOC_AM33XX)
 #define AM33XX_TAP_BASE		(AM33XX_CTRL_BASE + \
 				TI81XX_CONTROL_DEVICE_ID - 0x204)
 
@@ -171,9 +169,7 @@ static struct omap_globals omap4_globals = {
 
 void __init omap2_set_globals_443x(void)
 {
-	omap2_set_globals_tap(&omap4_globals);
-	omap2_set_globals_control(&omap4_globals);
-	omap2_set_globals_prcm(&omap4_globals);
+	__omap2_set_globals(&omap4_globals);
 }
 
 void __init omap4_map_io(void)

arch/arm/mach-omap2/common.h

@@ -120,6 +120,7 @@ extern void omap2_init_common_infrastructure(void);
 extern struct sys_timer omap2_timer;
 extern struct sys_timer omap3_timer;
 extern struct sys_timer omap3_secure_timer;
+extern struct sys_timer omap3_am33xx_timer;
 extern struct sys_timer omap4_timer;
 
 void omap2420_init_early(void);
@@ -128,8 +129,10 @@ void omap3430_init_early(void);
 void omap35xx_init_early(void);
 void omap3630_init_early(void);
 void omap3_init_early(void);	/* Do not use this one */
+void am33xx_init_early(void);
 void am35xx_init_early(void);
 void ti81xx_init_early(void);
+void am33xx_init_early(void);
 void omap4430_init_early(void);
 void omap3_init_late(void);	/* Do not use this one */
 void omap4430_init_late(void);
@@ -171,7 +174,12 @@ void omap2_set_globals_am33xx(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
 void omap2_set_globals_tap(struct omap_globals *);
+#if defined(CONFIG_SOC_HAS_OMAP2_SDRC)
 void omap2_set_globals_sdrc(struct omap_globals *);
+#else
+static inline void omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
+{ }
+#endif
 void omap2_set_globals_control(struct omap_globals *);
 void omap2_set_globals_prcm(struct omap_globals *);
 

arch/arm/mach-omap2/control.c

@@ -241,6 +241,49 @@ void omap3_ctrl_write_boot_mode(u8 bootmode)
 
 #endif
 
+/**
+ * omap_ctrl_write_dsp_boot_addr - set boot address for a remote processor
+ * @bootaddr: physical address of the boot loader
+ *
+ * Set boot address for the boot loader of a supported processor
+ * when a power ON sequence occurs.
+ */
+void omap_ctrl_write_dsp_boot_addr(u32 bootaddr)
+{
+	u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTADDR :
+		     cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTADDR :
+		     cpu_is_omap44xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR :
+		     0;
+
+	if (!offset) {
+		pr_err("%s: unsupported omap type\n", __func__);
+		return;
+	}
+
+	omap_ctrl_writel(bootaddr, offset);
+}
+
+/**
+ * omap_ctrl_write_dsp_boot_mode - set boot mode for a remote processor
+ * @bootmode: 8-bit value to pass to some boot code
+ *
+ * Sets boot mode for the boot loader of a supported processor
+ * when a power ON sequence occurs.
+ */
+void omap_ctrl_write_dsp_boot_mode(u8 bootmode)
+{
+	u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTMOD :
+		     cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTMOD :
+		     0;
+
+	if (!offset) {
+		pr_err("%s: unsupported omap type\n", __func__);
+		return;
+	}
+
+	omap_ctrl_writel(bootmode, offset);
+}
+
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 /*
  * Clears the scratchpad contents in case of cold boot-

arch/arm/mach-omap2/control.h

@@ -21,6 +21,8 @@
 #include <mach/ctrl_module_pad_core_44xx.h>
 #include <mach/ctrl_module_pad_wkup_44xx.h>
 
+#include <plat/am33xx.h>
+
 #ifndef __ASSEMBLY__
 #define OMAP242X_CTRL_REGADDR(reg)					\
 		OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
@@ -28,6 +30,8 @@
 		OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
 #define OMAP343X_CTRL_REGADDR(reg)					\
 		OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define AM33XX_CTRL_REGADDR(reg)					\
+		AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg))
 #else
 #define OMAP242X_CTRL_REGADDR(reg)					\
 		OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
@@ -35,6 +39,8 @@
 		OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
 #define OMAP343X_CTRL_REGADDR(reg)					\
 		OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define AM33XX_CTRL_REGADDR(reg)					\
+		AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg))
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -182,6 +188,7 @@
 #define OMAP3630_CONTROL_FUSE_OPP120_VDD1       (OMAP2_CONTROL_GENERAL + 0x0120)
 #define OMAP3630_CONTROL_FUSE_OPP50_VDD2        (OMAP2_CONTROL_GENERAL + 0x0128)
 #define OMAP3630_CONTROL_FUSE_OPP100_VDD2       (OMAP2_CONTROL_GENERAL + 0x012C)
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL	(OMAP2_CONTROL_GENERAL + 0x02f0)
 
 /* OMAP44xx control efuse offsets */
 #define OMAP44XX_CONTROL_FUSE_IVA_OPP50		0x22C
@@ -312,15 +319,15 @@
 						OMAP343X_SCRATCHPAD + reg)
 
 /* AM35XX_CONTROL_IPSS_CLK_CTRL bits */
-#define AM35XX_USBOTG_VBUSP_CLK_SHIFT   0
-#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT   1
-#define AM35XX_VPFE_VBUSP_CLK_SHIFT     2
-#define AM35XX_HECC_VBUSP_CLK_SHIFT     3
-#define AM35XX_USBOTG_FCLK_SHIFT        8
-#define AM35XX_CPGMAC_FCLK_SHIFT        9
-#define AM35XX_VPFE_FCLK_SHIFT          10
-
-/*AM35XX CONTROL_LVL_INTR_CLEAR bits*/
+#define AM35XX_USBOTG_VBUSP_CLK_SHIFT	0
+#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT	1
+#define AM35XX_VPFE_VBUSP_CLK_SHIFT	2
+#define AM35XX_HECC_VBUSP_CLK_SHIFT	3
+#define AM35XX_USBOTG_FCLK_SHIFT	8
+#define AM35XX_CPGMAC_FCLK_SHIFT	9
+#define AM35XX_VPFE_FCLK_SHIFT		10
+
+/* AM35XX CONTROL_LVL_INTR_CLEAR bits */
 #define AM35XX_CPGMAC_C0_MISC_PULSE_CLR	BIT(0)
 #define AM35XX_CPGMAC_C0_RX_PULSE_CLR	BIT(1)
 #define AM35XX_CPGMAC_C0_RX_THRESH_CLR	BIT(2)
@@ -330,21 +337,22 @@
 #define AM35XX_VPFE_CCDC_VD1_INT_CLR	BIT(6)
 #define AM35XX_VPFE_CCDC_VD2_INT_CLR	BIT(7)
 
-/*AM35XX CONTROL_IP_SW_RESET bits*/
+/* AM35XX CONTROL_IP_SW_RESET bits */
 #define AM35XX_USBOTGSS_SW_RST		BIT(0)
 #define AM35XX_CPGMACSS_SW_RST		BIT(1)
 #define AM35XX_VPFE_VBUSP_SW_RST	BIT(2)
 #define AM35XX_HECC_SW_RST		BIT(3)
 #define AM35XX_VPFE_PCLK_SW_RST		BIT(4)
 
-/*
- * CONTROL AM33XX STATUS register
- */
+/* AM33XX CONTROL_STATUS register */
 #define AM33XX_CONTROL_STATUS		0x040
+#define AM33XX_CONTROL_SEC_CLK_CTRL	0x1bc
 
-/*
- * CONTROL OMAP STATUS register to identify OMAP3 features
- */
+/* AM33XX CONTROL_STATUS bitfields (partial) */
+#define AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT		22
+#define AM33XX_CONTROL_STATUS_SYSBOOT1_MASK		(0x3 << 22)
+
+/* CONTROL OMAP STATUS register to identify OMAP3 features */
 #define OMAP3_CONTROL_OMAP_STATUS	0x044c
 
 #define OMAP3_SGX_SHIFT			13
@@ -397,6 +405,8 @@ extern u32 omap3_arm_context[128];
 extern void omap3_control_save_context(void);
 extern void omap3_control_restore_context(void);
 extern void omap3_ctrl_write_boot_mode(u8 bootmode);
+extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr);
+extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
 extern void omap3630_ctrl_disable_rta(void);
 extern int omap3_ctrl_save_padconf(void);
 #else

arch/arm/mach-omap2/dpll3xxx.c

@@ -135,11 +135,20 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
  */
 static int _omap3_noncore_dpll_lock(struct clk *clk)
 {
+	const struct dpll_data *dd;
 	u8 ai;
-	int r;
+	u8 state = 1;
+	int r = 0;
 
 	pr_debug("clock: locking DPLL %s\n", clk->name);
 
+	dd = clk->dpll_data;
+	state <<= __ffs(dd->idlest_mask);
+
+	/* Check if already locked */
+	if ((__raw_readl(dd->idlest_reg) & dd->idlest_mask) == state)
+		goto done;
+
 	ai = omap3_dpll_autoidle_read(clk);
 
 	if (ai)
@@ -152,6 +161,7 @@ static int _omap3_noncore_dpll_lock(struct clk *clk)
 	if (ai)
 		omap3_dpll_allow_idle(clk);
 
+done:
 	return r;
 }
 
@@ -628,3 +638,17 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk)
 		rate = clk->parent->rate * 2;
 	return rate;
 }
+
+/* OMAP3/4 non-CORE DPLL clkops */
+
+const struct clkops clkops_omap3_noncore_dpll_ops = {
+	.enable		= omap3_noncore_dpll_enable,
+	.disable	= omap3_noncore_dpll_disable,
+	.allow_idle	= omap3_dpll_allow_idle,
+	.deny_idle	= omap3_dpll_deny_idle,
+};
+
+const struct clkops clkops_omap3_core_dpll_ops = {
+	.allow_idle	= omap3_dpll_allow_idle,
+	.deny_idle	= omap3_dpll_deny_idle,
+};

arch/arm/mach-omap2/dsp.c

@@ -23,6 +23,7 @@
 
 #include <asm/memblock.h>
 
+#include "control.h"
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
 #ifdef CONFIG_BRIDGE_DVFS
@@ -46,6 +47,9 @@ static struct omap_dsp_platform_data omap_dsp_pdata __initdata = {
 	.dsp_cm_read = omap2_cm_read_mod_reg,
 	.dsp_cm_write = omap2_cm_write_mod_reg,
 	.dsp_cm_rmw_bits = omap2_cm_rmw_mod_reg_bits,
+
+	.set_bootaddr = omap_ctrl_write_dsp_boot_addr,
+	.set_bootmode = omap_ctrl_write_dsp_boot_mode,
 };
 
 static phys_addr_t omap_dsp_phys_mempool_base;

arch/arm/mach-omap2/id.c

@@ -44,7 +44,7 @@ int omap_type(void)
 
 	if (cpu_is_omap24xx()) {
 		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
-	} else if (cpu_is_am33xx()) {
+	} else if (soc_is_am33xx()) {
 		val = omap_ctrl_readl(AM33XX_CONTROL_STATUS);
 	} else if (cpu_is_omap34xx()) {
 		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
@@ -189,7 +189,7 @@ static void __init omap3_cpuinfo(void)
 		cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
 	} else if (cpu_is_ti816x()) {
 		cpu_name = "TI816X";
-	} else if (cpu_is_am335x()) {
+	} else if (soc_is_am335x()) {
 		cpu_name =  "AM335X";
 	} else if (cpu_is_ti814x()) {
 		cpu_name = "TI814X";

arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h

@@ -42,6 +42,7 @@
 #define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_1		0x0268
 #define OMAP4_CTRL_MODULE_CORE_STATUS				0x02c4
 #define OMAP4_CTRL_MODULE_CORE_DEV_CONF				0x0300
+#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR			0x0304
 #define OMAP4_CTRL_MODULE_CORE_LDOVBB_IVA_VOLTAGE_CTRL		0x0314
 #define OMAP4_CTRL_MODULE_CORE_LDOVBB_MPU_VOLTAGE_CTRL		0x0318
 #define OMAP4_CTRL_MODULE_CORE_LDOSRAM_IVA_VOLTAGE_CTRL		0x0320

arch/arm/mach-omap2/include/mach/debug-macro.S

@@ -72,6 +72,8 @@ omap_uart_lsr:	.word	0
 		beq	82f			@ configure UART2
 		cmp	\rp, #TI81XXUART3	@ ti81Xx UART offsets different
 		beq	83f			@ configure UART3
+		cmp	\rp, #AM33XXUART1	@ AM33XX UART offsets different
+		beq	84f			@ configure UART1
 		cmp	\rp, #ZOOM_UART		@ only on zoom2/3
 		beq	95f			@ configure ZOOM_UART
 
@@ -100,7 +102,9 @@ omap_uart_lsr:	.word	0
 		b	98f
 83:		mov	\rp, #UART_OFFSET(TI81XX_UART3_BASE)
 		b	98f
-
+84:		ldr	\rp, =AM33XX_UART1_BASE
+		and	\rp, \rp, #0x00ffffff
+		b	97f
 95:		ldr	\rp, =ZOOM_UART_BASE
 		str	\rp, [\tmp, #0]		@ omap_uart_phys
 		ldr	\rp, =ZOOM_UART_VIRT
@@ -109,6 +113,17 @@ omap_uart_lsr:	.word	0
 		str	\rp, [\tmp, #8]		@ omap_uart_lsr
 		b	10b
 
+		/* AM33XX: Store both phys and virt address for the uart */
+97:		add	\rp, \rp, #0x44000000	@ phys base
+		str	\rp, [\tmp, #0]		@ omap_uart_phys
+		sub	\rp, \rp, #0x44000000	@ phys base
+		add	\rp, \rp, #0xf9000000	@ virt base
+		str	\rp, [\tmp, #4]		@ omap_uart_virt
+		mov	\rp, #(UART_LSR << OMAP_PORT_SHIFT)
+		str	\rp, [\tmp, #8]		@ omap_uart_lsr
+
+		b	10b
+
 		/* Store both phys and virt address for the uart */
 98:		add	\rp, \rp, #0x48000000	@ phys base
 		str	\rp, [\tmp, #0]		@ omap_uart_phys

arch/arm/mach-omap2/io.c

@@ -477,6 +477,19 @@ void __init ti81xx_init_late(void)
 }
 #endif
 
+#ifdef CONFIG_SOC_AM33XX
+void __init am33xx_init_early(void)
+{
+	omap2_set_globals_am33xx();
+	omap3xxx_check_revision();
+	ti81xx_check_features();
+	omap_common_init_early();
+	am33xx_voltagedomains_init();
+	am33xx_powerdomains_init();
+	am33xx_clockdomains_init();
+}
+#endif
+
 #ifdef CONFIG_ARCH_OMAP4
 void __init omap4430_init_early(void)
 {

arch/arm/mach-omap2/irq.c

@@ -280,7 +280,7 @@ int __init omap_intc_of_init(struct device_node *node,
 	return 0;
 }
 
-#ifdef CONFIG_ARCH_OMAP3
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
 static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
 
 void omap_intc_save_context(void)

arch/arm/mach-omap2/omap_hwmod.c

@@ -166,6 +166,31 @@
  */
 #define LINKS_PER_OCP_IF		2
 
+/**
+ * struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations
+ * @enable_module: function to enable a module (via MODULEMODE)
+ * @disable_module: function to disable a module (via MODULEMODE)
+ *
+ * XXX Eventually this functionality will be hidden inside the PRM/CM
+ * device drivers.  Until then, this should avoid huge blocks of cpu_is_*()
+ * conditionals in this code.
+ */
+struct omap_hwmod_soc_ops {
+	void (*enable_module)(struct omap_hwmod *oh);
+	int (*disable_module)(struct omap_hwmod *oh);
+	int (*wait_target_ready)(struct omap_hwmod *oh);
+	int (*assert_hardreset)(struct omap_hwmod *oh,
+				struct omap_hwmod_rst_info *ohri);
+	int (*deassert_hardreset)(struct omap_hwmod *oh,
+				  struct omap_hwmod_rst_info *ohri);
+	int (*is_hardreset_asserted)(struct omap_hwmod *oh,
+				     struct omap_hwmod_rst_info *ohri);
+	int (*init_clkdm)(struct omap_hwmod *oh);
+};
+
+/* soc_ops: adapts the omap_hwmod code to the currently-booted SoC */
+static struct omap_hwmod_soc_ops soc_ops;
+
 /* omap_hwmod_list contains all registered struct omap_hwmods */
 static LIST_HEAD(omap_hwmod_list);
 
@@ -186,6 +211,9 @@ static struct omap_hwmod_link *linkspace;
  */
 static unsigned short free_ls, max_ls, ls_supp;
 
+/* inited: set to true once the hwmod code is initialized */
+static bool inited;
+
 /* Private functions */
 
 /**
@@ -387,6 +415,49 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v)
 	return 0;
 }
 
+/**
+ * _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v
+ * @oh: struct omap_hwmod *
+ *
+ * The DMADISABLE bit is a semi-automatic bit present in sysconfig register
+ * of some modules. When the DMA must perform read/write accesses, the
+ * DMADISABLE bit is cleared by the hardware. But when the DMA must stop
+ * for power management, software must set the DMADISABLE bit back to 1.
+ *
+ * Set the DMADISABLE bit in @v for hwmod @oh.  Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int _set_dmadisable(struct omap_hwmod *oh)
+{
+	u32 v;
+	u32 dmadisable_mask;
+
+	if (!oh->class->sysc ||
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_DMADISABLE))
+		return -EINVAL;
+
+	if (!oh->class->sysc->sysc_fields) {
+		WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
+		return -EINVAL;
+	}
+
+	/* clocks must be on for this operation */
+	if (oh->_state != _HWMOD_STATE_ENABLED) {
+		pr_warn("omap_hwmod: %s: dma can be disabled only from enabled state\n", oh->name);
+		return -EINVAL;
+	}
+
+	pr_debug("omap_hwmod: %s: setting DMADISABLE\n", oh->name);
+
+	v = oh->_sysc_cache;
+	dmadisable_mask =
+		(0x1 << oh->class->sysc->sysc_fields->dmadisable_shift);
+	v |= dmadisable_mask;
+	_write_sysconfig(v, oh);
+
+	return 0;
+}
+
 /**
  * _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v
  * @oh: struct omap_hwmod *
@@ -771,23 +842,19 @@ static void _disable_optional_clocks(struct omap_hwmod *oh)
 }
 
 /**
- * _enable_module - enable CLKCTRL modulemode on OMAP4
+ * _omap4_enable_module - enable CLKCTRL modulemode on OMAP4
  * @oh: struct omap_hwmod *
  *
  * Enables the PRCM module mode related to the hwmod @oh.
  * No return value.
  */
-static void _enable_module(struct omap_hwmod *oh)
+static void _omap4_enable_module(struct omap_hwmod *oh)
 {
-	/* The module mode does not exist prior OMAP4 */
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		return;
-
 	if (!oh->clkdm || !oh->prcm.omap4.modulemode)
 		return;
 
-	pr_debug("omap_hwmod: %s: _enable_module: %d\n",
-		 oh->name, oh->prcm.omap4.modulemode);
+	pr_debug("omap_hwmod: %s: %s: %d\n",
+		 oh->name, __func__, oh->prcm.omap4.modulemode);
 
 	omap4_cminst_module_enable(oh->prcm.omap4.modulemode,
 				   oh->clkdm->prcm_partition,
@@ -807,10 +874,7 @@ static void _enable_module(struct omap_hwmod *oh)
  */
 static int _omap4_wait_target_disable(struct omap_hwmod *oh)
 {
-	if (!cpu_is_omap44xx())
-		return 0;
-
-	if (!oh)
+	if (!oh || !oh->clkdm)
 		return -EINVAL;
 
 	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
@@ -1285,24 +1349,20 @@ static struct omap_hwmod *_lookup(const char *name)
 
 	return oh;
 }
+
 /**
  * _init_clkdm - look up a clockdomain name, store pointer in omap_hwmod
  * @oh: struct omap_hwmod *
  *
  * Convert a clockdomain name stored in a struct omap_hwmod into a
  * clockdomain pointer, and save it into the struct omap_hwmod.
- * return -EINVAL if clkdm_name does not exist or if the lookup failed.
+ * Return -EINVAL if the clkdm_name lookup failed.
  */
 static int _init_clkdm(struct omap_hwmod *oh)
 {
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())
+	if (!oh->clkdm_name)
 		return 0;
 
-	if (!oh->clkdm_name) {
-		pr_warning("omap_hwmod: %s: no clkdm_name\n", oh->name);
-		return -EINVAL;
-	}
-
 	oh->clkdm = clkdm_lookup(oh->clkdm_name);
 	if (!oh->clkdm) {
 		pr_warning("omap_hwmod: %s: could not associate to clkdm %s\n",
@@ -1338,7 +1398,8 @@ static int _init_clocks(struct omap_hwmod *oh, void *data)
 	ret |= _init_main_clk(oh);
 	ret |= _init_interface_clks(oh);
 	ret |= _init_opt_clks(oh);
-	ret |= _init_clkdm(oh);
+	if (soc_ops.init_clkdm)
+		ret |= soc_ops.init_clkdm(oh);
 
 	if (!ret)
 		oh->_state = _HWMOD_STATE_CLKS_INITED;
@@ -1348,53 +1409,6 @@ static int _init_clocks(struct omap_hwmod *oh, void *data)
 	return ret;
 }
 
-/**
- * _wait_target_ready - wait for a module to leave slave idle
- * @oh: struct omap_hwmod *
- *
- * Wait for a module @oh to leave slave idle.  Returns 0 if the module
- * does not have an IDLEST bit or if the module successfully leaves
- * slave idle; otherwise, pass along the return value of the
- * appropriate *_cm*_wait_module_ready() function.
- */
-static int _wait_target_ready(struct omap_hwmod *oh)
-{
-	struct omap_hwmod_ocp_if *os;
-	int ret;
-
-	if (!oh)
-		return -EINVAL;
-
-	if (oh->flags & HWMOD_NO_IDLEST)
-		return 0;
-
-	os = _find_mpu_rt_port(oh);
-	if (!os)
-		return 0;
-
-	/* XXX check module SIDLEMODE */
-
-	/* XXX check clock enable states */
-
-	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-		ret = omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs,
-						 oh->prcm.omap2.idlest_reg_id,
-						 oh->prcm.omap2.idlest_idle_bit);
-	} else if (cpu_is_omap44xx()) {
-		if (!oh->clkdm)
-			return -EINVAL;
-
-		ret = omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition,
-						     oh->clkdm->cm_inst,
-						     oh->clkdm->clkdm_offs,
-						     oh->prcm.omap4.clkctrl_offs);
-	} else {
-		BUG();
-	};
-
-	return ret;
-}
-
 /**
  * _lookup_hardreset - fill register bit info for this hwmod/reset line
  * @oh: struct omap_hwmod *
@@ -1431,32 +1445,31 @@ static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name,
  * @oh: struct omap_hwmod *
  * @name: name of the reset line to lookup and assert
  *
- * Some IP like dsp, ipu or iva contain processor that require
- * an HW reset line to be assert / deassert in order to enable fully
- * the IP.
+ * Some IP like dsp, ipu or iva contain processor that require an HW
+ * reset line to be assert / deassert in order to enable fully the IP.
+ * Returns -EINVAL if @oh is null, -ENOSYS if we have no way of
+ * asserting the hardreset line on the currently-booted SoC, or passes
+ * along the return value from _lookup_hardreset() or the SoC's
+ * assert_hardreset code.
  */
 static int _assert_hardreset(struct omap_hwmod *oh, const char *name)
 {
 	struct omap_hwmod_rst_info ohri;
-	u8 ret;
+	u8 ret = -EINVAL;
 
 	if (!oh)
 		return -EINVAL;
 
+	if (!soc_ops.assert_hardreset)
+		return -ENOSYS;
+
 	ret = _lookup_hardreset(oh, name, &ohri);
 	if (IS_ERR_VALUE(ret))
 		return ret;
 
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs,
-						  ohri.rst_shift);
-	else if (cpu_is_omap44xx())
-		return omap4_prminst_assert_hardreset(ohri.rst_shift,
-				  oh->clkdm->pwrdm.ptr->prcm_partition,
-				  oh->clkdm->pwrdm.ptr->prcm_offs,
-				  oh->prcm.omap4.rstctrl_offs);
-	else
-		return -EINVAL;
+	ret = soc_ops.assert_hardreset(oh, &ohri);
+
+	return ret;
 }
 
 /**
@@ -1465,38 +1478,29 @@ static int _assert_hardreset(struct omap_hwmod *oh, const char *name)
  * @oh: struct omap_hwmod *
  * @name: name of the reset line to look up and deassert
  *
- * Some IP like dsp, ipu or iva contain processor that require
- * an HW reset line to be assert / deassert in order to enable fully
- * the IP.
+ * Some IP like dsp, ipu or iva contain processor that require an HW
+ * reset line to be assert / deassert in order to enable fully the IP.
+ * Returns -EINVAL if @oh is null, -ENOSYS if we have no way of
+ * deasserting the hardreset line on the currently-booted SoC, or passes
+ * along the return value from _lookup_hardreset() or the SoC's
+ * deassert_hardreset code.
  */
 static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 {
 	struct omap_hwmod_rst_info ohri;
-	int ret;
+	int ret = -EINVAL;
 
 	if (!oh)
 		return -EINVAL;
 
+	if (!soc_ops.deassert_hardreset)
+		return -ENOSYS;
+
 	ret = _lookup_hardreset(oh, name, &ohri);
 	if (IS_ERR_VALUE(ret))
 		return ret;
 
-	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-		ret = omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs,
-						   ohri.rst_shift,
-						   ohri.st_shift);
-	} else if (cpu_is_omap44xx()) {
-		if (ohri.st_shift)
-			pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
-			       oh->name, name);
-		ret = omap4_prminst_deassert_hardreset(ohri.rst_shift,
-				  oh->clkdm->pwrdm.ptr->prcm_partition,
-				  oh->clkdm->pwrdm.ptr->prcm_offs,
-				  oh->prcm.omap4.rstctrl_offs);
-	} else {
-		return -EINVAL;
-	}
-
+	ret = soc_ops.deassert_hardreset(oh, &ohri);
 	if (ret == -EBUSY)
 		pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name);
 
@@ -1509,31 +1513,28 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
  * @oh: struct omap_hwmod *
  * @name: name of the reset line to look up and read
  *
- * Return the state of the reset line.
+ * Return the state of the reset line.  Returns -EINVAL if @oh is
+ * null, -ENOSYS if we have no way of reading the hardreset line
+ * status on the currently-booted SoC, or passes along the return
+ * value from _lookup_hardreset() or the SoC's is_hardreset_asserted
+ * code.
  */
 static int _read_hardreset(struct omap_hwmod *oh, const char *name)
 {
 	struct omap_hwmod_rst_info ohri;
-	u8 ret;
+	u8 ret = -EINVAL;
 
 	if (!oh)
 		return -EINVAL;
 
+	if (!soc_ops.is_hardreset_asserted)
+		return -ENOSYS;
+
 	ret = _lookup_hardreset(oh, name, &ohri);
 	if (IS_ERR_VALUE(ret))
 		return ret;
 
-	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-		return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs,
-						       ohri.st_shift);
-	} else if (cpu_is_omap44xx()) {
-		return omap4_prminst_is_hardreset_asserted(ohri.rst_shift,
-				  oh->clkdm->pwrdm.ptr->prcm_partition,
-				  oh->clkdm->pwrdm.ptr->prcm_offs,
-				  oh->prcm.omap4.rstctrl_offs);
-	} else {
-		return -EINVAL;
-	}
+	return soc_ops.is_hardreset_asserted(oh, &ohri);
 }
 
 /**
@@ -1571,10 +1572,6 @@ static int _omap4_disable_module(struct omap_hwmod *oh)
 {
 	int v;
 
-	/* The module mode does not exist prior OMAP4 */
-	if (!cpu_is_omap44xx())
-		return -EINVAL;
-
 	if (!oh->clkdm || !oh->prcm.omap4.modulemode)
 		return -EINVAL;
 
@@ -1698,11 +1695,17 @@ static int _ocp_softreset(struct omap_hwmod *oh)
  * therefore have no OCP header registers to access.  Others (like the
  * IVA) have idiosyncratic reset sequences.  So for these relatively
  * rare cases, custom reset code can be supplied in the struct
- * omap_hwmod_class .reset function pointer.  Passes along the return
- * value from either _ocp_softreset() or the custom reset function -
- * these must return -EINVAL if the hwmod cannot be reset this way or
- * if the hwmod is in the wrong state, -ETIMEDOUT if the module did
- * not reset in time, or 0 upon success.
+ * omap_hwmod_class .reset function pointer.
+ *
+ * _set_dmadisable() is called to set the DMADISABLE bit so that it
+ * does not prevent idling of the system. This is necessary for cases
+ * where ROMCODE/BOOTLOADER uses dma and transfers control to the
+ * kernel without disabling dma.
+ *
+ * Passes along the return value from either _ocp_softreset() or the
+ * custom reset function - these must return -EINVAL if the hwmod
+ * cannot be reset this way or if the hwmod is in the wrong state,
+ * -ETIMEDOUT if the module did not reset in time, or 0 upon success.
  */
 static int _reset(struct omap_hwmod *oh)
 {
@@ -1724,6 +1727,8 @@ static int _reset(struct omap_hwmod *oh)
 		}
 	}
 
+	_set_dmadisable(oh);
+
 	/*
 	 * OCP_SYSCONFIG bits need to be reprogrammed after a
 	 * softreset.  The _enable() function should be split to avoid
@@ -1814,9 +1819,11 @@ static int _enable(struct omap_hwmod *oh)
 	}
 
 	_enable_clocks(oh);
-	_enable_module(oh);
+	if (soc_ops.enable_module)
+		soc_ops.enable_module(oh);
 
-	r = _wait_target_ready(oh);
+	r = (soc_ops.wait_target_ready) ? soc_ops.wait_target_ready(oh) :
+		-EINVAL;
 	if (!r) {
 		/*
 		 * Set the clockdomain to HW_AUTO only if the target is ready,
@@ -1870,7 +1877,8 @@ static int _idle(struct omap_hwmod *oh)
 		_idle_sysc(oh);
 	_del_initiator_dep(oh, mpu_oh);
 
-	_omap4_disable_module(oh);
+	if (soc_ops.disable_module)
+		soc_ops.disable_module(oh);
 
 	/*
 	 * The module must be in idle mode before disabling any parents
@@ -1975,7 +1983,8 @@ static int _shutdown(struct omap_hwmod *oh)
 	if (oh->_state == _HWMOD_STATE_ENABLED) {
 		_del_initiator_dep(oh, mpu_oh);
 		/* XXX what about the other system initiators here? dma, dsp */
-		_omap4_disable_module(oh);
+		if (soc_ops.disable_module)
+			soc_ops.disable_module(oh);
 		_disable_clocks(oh);
 		if (oh->clkdm)
 			clkdm_hwmod_disable(oh->clkdm, oh);
@@ -2431,6 +2440,194 @@ static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois)
 	return 0;
 }
 
+/* Static functions intended only for use in soc_ops field function pointers */
+
+/**
+ * _omap2_wait_target_ready - wait for a module to leave slave idle
+ * @oh: struct omap_hwmod *
+ *
+ * Wait for a module @oh to leave slave idle.  Returns 0 if the module
+ * does not have an IDLEST bit or if the module successfully leaves
+ * slave idle; otherwise, pass along the return value of the
+ * appropriate *_cm*_wait_module_ready() function.
+ */
+static int _omap2_wait_target_ready(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return -EINVAL;
+
+	if (oh->flags & HWMOD_NO_IDLEST)
+		return 0;
+
+	if (!_find_mpu_rt_port(oh))
+		return 0;
+
+	/* XXX check module SIDLEMODE, hardreset status, enabled clocks */
+
+	return omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs,
+					  oh->prcm.omap2.idlest_reg_id,
+					  oh->prcm.omap2.idlest_idle_bit);
+}
+
+/**
+ * _omap4_wait_target_ready - wait for a module to leave slave idle
+ * @oh: struct omap_hwmod *
+ *
+ * Wait for a module @oh to leave slave idle.  Returns 0 if the module
+ * does not have an IDLEST bit or if the module successfully leaves
+ * slave idle; otherwise, pass along the return value of the
+ * appropriate *_cm*_wait_module_ready() function.
+ */
+static int _omap4_wait_target_ready(struct omap_hwmod *oh)
+{
+	if (!oh || !oh->clkdm)
+		return -EINVAL;
+
+	if (oh->flags & HWMOD_NO_IDLEST)
+		return 0;
+
+	if (!_find_mpu_rt_port(oh))
+		return 0;
+
+	/* XXX check module SIDLEMODE, hardreset status */
+
+	return omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition,
+					      oh->clkdm->cm_inst,
+					      oh->clkdm->clkdm_offs,
+					      oh->prcm.omap4.clkctrl_offs);
+}
+
+/**
+ * _omap2_assert_hardreset - call OMAP2 PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to assert hardreset
+ * @ohri: hardreset line data
+ *
+ * Call omap2_prm_assert_hardreset() with parameters extracted from
+ * the hwmod @oh and the hardreset line data @ohri.  Only intended for
+ * use as an soc_ops function pointer.  Passes along the return value
+ * from omap2_prm_assert_hardreset().  XXX This function is scheduled
+ * for removal when the PRM code is moved into drivers/.
+ */
+static int _omap2_assert_hardreset(struct omap_hwmod *oh,
+				   struct omap_hwmod_rst_info *ohri)
+{
+	return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs,
+					  ohri->rst_shift);
+}
+
+/**
+ * _omap2_deassert_hardreset - call OMAP2 PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to deassert hardreset
+ * @ohri: hardreset line data
+ *
+ * Call omap2_prm_deassert_hardreset() with parameters extracted from
+ * the hwmod @oh and the hardreset line data @ohri.  Only intended for
+ * use as an soc_ops function pointer.  Passes along the return value
+ * from omap2_prm_deassert_hardreset().  XXX This function is
+ * scheduled for removal when the PRM code is moved into drivers/.
+ */
+static int _omap2_deassert_hardreset(struct omap_hwmod *oh,
+				     struct omap_hwmod_rst_info *ohri)
+{
+	return omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs,
+					    ohri->rst_shift,
+					    ohri->st_shift);
+}
+
+/**
+ * _omap2_is_hardreset_asserted - call OMAP2 PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to test hardreset
+ * @ohri: hardreset line data
+ *
+ * Call omap2_prm_is_hardreset_asserted() with parameters extracted
+ * from the hwmod @oh and the hardreset line data @ohri.  Only
+ * intended for use as an soc_ops function pointer.  Passes along the
+ * return value from omap2_prm_is_hardreset_asserted().  XXX This
+ * function is scheduled for removal when the PRM code is moved into
+ * drivers/.
+ */
+static int _omap2_is_hardreset_asserted(struct omap_hwmod *oh,
+					struct omap_hwmod_rst_info *ohri)
+{
+	return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs,
+					       ohri->st_shift);
+}
+
+/**
+ * _omap4_assert_hardreset - call OMAP4 PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to assert hardreset
+ * @ohri: hardreset line data
+ *
+ * Call omap4_prminst_assert_hardreset() with parameters extracted
+ * from the hwmod @oh and the hardreset line data @ohri.  Only
+ * intended for use as an soc_ops function pointer.  Passes along the
+ * return value from omap4_prminst_assert_hardreset().  XXX This
+ * function is scheduled for removal when the PRM code is moved into
+ * drivers/.
+ */
+static int _omap4_assert_hardreset(struct omap_hwmod *oh,
+				   struct omap_hwmod_rst_info *ohri)
+{
+	if (!oh->clkdm)
+		return -EINVAL;
+
+	return omap4_prminst_assert_hardreset(ohri->rst_shift,
+				oh->clkdm->pwrdm.ptr->prcm_partition,
+				oh->clkdm->pwrdm.ptr->prcm_offs,
+				oh->prcm.omap4.rstctrl_offs);
+}
+
+/**
+ * _omap4_deassert_hardreset - call OMAP4 PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to deassert hardreset
+ * @ohri: hardreset line data
+ *
+ * Call omap4_prminst_deassert_hardreset() with parameters extracted
+ * from the hwmod @oh and the hardreset line data @ohri.  Only
+ * intended for use as an soc_ops function pointer.  Passes along the
+ * return value from omap4_prminst_deassert_hardreset().  XXX This
+ * function is scheduled for removal when the PRM code is moved into
+ * drivers/.
+ */
+static int _omap4_deassert_hardreset(struct omap_hwmod *oh,
+				     struct omap_hwmod_rst_info *ohri)
+{
+	if (!oh->clkdm)
+		return -EINVAL;
+
+	if (ohri->st_shift)
+		pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
+		       oh->name, ohri->name);
+	return omap4_prminst_deassert_hardreset(ohri->rst_shift,
+				oh->clkdm->pwrdm.ptr->prcm_partition,
+				oh->clkdm->pwrdm.ptr->prcm_offs,
+				oh->prcm.omap4.rstctrl_offs);
+}
+
+/**
+ * _omap4_is_hardreset_asserted - call OMAP4 PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to test hardreset
+ * @ohri: hardreset line data
+ *
+ * Call omap4_prminst_is_hardreset_asserted() with parameters
+ * extracted from the hwmod @oh and the hardreset line data @ohri.
+ * Only intended for use as an soc_ops function pointer.  Passes along
+ * the return value from omap4_prminst_is_hardreset_asserted().  XXX
+ * This function is scheduled for removal when the PRM code is moved
+ * into drivers/.
+ */
+static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh,
+					struct omap_hwmod_rst_info *ohri)
+{
+	if (!oh->clkdm)
+		return -EINVAL;
+
+	return omap4_prminst_is_hardreset_asserted(ohri->rst_shift,
+				oh->clkdm->pwrdm.ptr->prcm_partition,
+				oh->clkdm->pwrdm.ptr->prcm_offs,
+				oh->prcm.omap4.rstctrl_offs);
+}
+
 /* Public functions */
 
 u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs)
@@ -2563,12 +2760,18 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
  *
  * Intended to be called early in boot before the clock framework is
  * initialized.  If @ois is not null, will register all omap_hwmods
- * listed in @ois that are valid for this chip.  Returns 0.
+ * listed in @ois that are valid for this chip.  Returns -EINVAL if
+ * omap_hwmod_init() hasn't been called before calling this function,
+ * -ENOMEM if the link memory area can't be allocated, or 0 upon
+ * success.
  */
 int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois)
 {
 	int r, i;
 
+	if (!inited)
+		return -EINVAL;
+
 	if (!ois)
 		return 0;
 
@@ -3401,3 +3604,47 @@ int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx)
 
 	return 0;
 }
+
+/**
+ * omap_hwmod_init - initialize the hwmod code
+ *
+ * Sets up some function pointers needed by the hwmod code to operate on the
+ * currently-booted SoC.  Intended to be called once during kernel init
+ * before any hwmods are registered.  No return value.
+ */
+void __init omap_hwmod_init(void)
+{
+	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+		soc_ops.wait_target_ready = _omap2_wait_target_ready;
+		soc_ops.assert_hardreset = _omap2_assert_hardreset;
+		soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
+		soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
+	} else if (cpu_is_omap44xx()) {
+		soc_ops.enable_module = _omap4_enable_module;
+		soc_ops.disable_module = _omap4_disable_module;
+		soc_ops.wait_target_ready = _omap4_wait_target_ready;
+		soc_ops.assert_hardreset = _omap4_assert_hardreset;
+		soc_ops.deassert_hardreset = _omap4_deassert_hardreset;
+		soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
+		soc_ops.init_clkdm = _init_clkdm;
+	} else {
+		WARN(1, "omap_hwmod: unknown SoC type\n");
+	}
+
+	inited = true;
+}
+
+/**
+ * omap_hwmod_get_main_clk - get pointer to main clock name
+ * @oh: struct omap_hwmod *
+ *
+ * Returns the main clock name assocated with @oh upon success,
+ * or NULL if @oh is NULL.
+ */
+const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return NULL;
+
+	return oh->main_clk;
+}

arch/arm/mach-omap2/omap_hwmod_2420_data.c

@@ -192,6 +192,11 @@ static struct omap_hwmod_class omap2420_mcbsp_hwmod_class = {
 	.name = "mcbsp",
 };
 
+static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = {
+	{ .role = "pad_fck", .clk = "mcbsp_clks" },
+	{ .role = "prcm_fck", .clk = "func_96m_ck" },
+};
+
 /* mcbsp1 */
 static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = {
 	{ .name = "tx", .irq = 59 },
@@ -214,6 +219,8 @@ static struct omap_hwmod omap2420_mcbsp1_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT,
 		},
 	},
+	.opt_clks	= mcbsp_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcbsp_opt_clks),
 };
 
 /* mcbsp2 */
@@ -238,6 +245,8 @@ static struct omap_hwmod omap2420_mcbsp2_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT,
 		},
 	},
+	.opt_clks	= mcbsp_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcbsp_opt_clks),
 };
 
 static struct omap_hwmod_class_sysconfig omap2420_msdi_sysc = {
@@ -585,5 +594,6 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = {
 
 int __init omap2420_hwmod_init(void)
 {
+	omap_hwmod_init();
 	return omap_hwmod_register_links(omap2420_hwmod_ocp_ifs);
 }

arch/arm/mach-omap2/omap_hwmod_2430_data.c

@@ -296,6 +296,11 @@ static struct omap_hwmod_class omap2430_mcbsp_hwmod_class = {
 	.rev  = MCBSP_CONFIG_TYPE2,
 };
 
+static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = {
+	{ .role = "pad_fck", .clk = "mcbsp_clks" },
+	{ .role = "prcm_fck", .clk = "func_96m_ck" },
+};
+
 /* mcbsp1 */
 static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = {
 	{ .name = "tx",		.irq = 59 },
@@ -320,6 +325,8 @@ static struct omap_hwmod omap2430_mcbsp1_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT,
 		},
 	},
+	.opt_clks	= mcbsp_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcbsp_opt_clks),
 };
 
 /* mcbsp2 */
@@ -345,6 +352,8 @@ static struct omap_hwmod omap2430_mcbsp2_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT,
 		},
 	},
+	.opt_clks	= mcbsp_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcbsp_opt_clks),
 };
 
 /* mcbsp3 */
@@ -370,6 +379,8 @@ static struct omap_hwmod omap2430_mcbsp3_hwmod = {
 			.idlest_idle_bit = OMAP2430_ST_MCBSP3_SHIFT,
 		},
 	},
+	.opt_clks	= mcbsp_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcbsp_opt_clks),
 };
 
 /* mcbsp4 */
@@ -401,6 +412,8 @@ static struct omap_hwmod omap2430_mcbsp4_hwmod = {
 			.idlest_idle_bit = OMAP2430_ST_MCBSP4_SHIFT,
 		},
 	},
+	.opt_clks	= mcbsp_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcbsp_opt_clks),
 };
 
 /* mcbsp5 */
@@ -432,6 +445,8 @@ static struct omap_hwmod omap2430_mcbsp5_hwmod = {
 			.idlest_idle_bit = OMAP2430_ST_MCBSP5_SHIFT,
 		},
 	},
+	.opt_clks	= mcbsp_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcbsp_opt_clks),
 };
 
 /* MMC/SD/SDIO common */
@@ -938,5 +953,6 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = {
 
 int __init omap2430_hwmod_init(void)
 {
+	omap_hwmod_init();
 	return omap_hwmod_register_links(omap2430_hwmod_ocp_ifs);
 }

arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c

@@ -68,7 +68,6 @@ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = {
 struct omap_hwmod_class omap2xxx_timer_hwmod_class = {
 	.name	= "timer",
 	.sysc	= &omap2xxx_timer_sysc,
-	.rev	= OMAP_TIMER_IP_VERSION_1,
 };
 
 /*
@@ -257,7 +256,6 @@ struct omap_hwmod omap2xxx_timer2_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
 };
 
@@ -276,7 +274,6 @@ struct omap_hwmod omap2xxx_timer3_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
 };
 
@@ -295,7 +292,6 @@ struct omap_hwmod omap2xxx_timer4_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
 };
 
@@ -314,7 +310,6 @@ struct omap_hwmod omap2xxx_timer5_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
 };
 
@@ -333,7 +328,6 @@ struct omap_hwmod omap2xxx_timer6_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
 };
 
@@ -352,7 +346,6 @@ struct omap_hwmod omap2xxx_timer7_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
 };
 
@@ -371,7 +364,6 @@ struct omap_hwmod omap2xxx_timer8_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
 };
 

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -129,7 +129,6 @@ static struct omap_hwmod_class_sysconfig omap3xxx_timer_1ms_sysc = {
 static struct omap_hwmod_class omap3xxx_timer_1ms_hwmod_class = {
 	.name = "timer",
 	.sysc = &omap3xxx_timer_1ms_sysc,
-	.rev = OMAP_TIMER_IP_VERSION_1,
 };
 
 static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = {
@@ -145,12 +144,11 @@ static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = {
 static struct omap_hwmod_class omap3xxx_timer_hwmod_class = {
 	.name = "timer",
 	.sysc = &omap3xxx_timer_sysc,
-	.rev =  OMAP_TIMER_IP_VERSION_1,
 };
 
 /* secure timers dev attribute */
 static struct omap_timer_capability_dev_attr capability_secure_dev_attr = {
-	.timer_capability	= OMAP_TIMER_SECURE,
+	.timer_capability	= OMAP_TIMER_ALWON | OMAP_TIMER_SECURE,
 };
 
 /* always-on timers dev attribute */
@@ -195,7 +193,6 @@ static struct omap_hwmod omap3xxx_timer2_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &omap3xxx_timer_1ms_hwmod_class,
 };
 
@@ -213,7 +210,6 @@ static struct omap_hwmod omap3xxx_timer3_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPT3_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
 };
 
@@ -231,7 +227,6 @@ static struct omap_hwmod omap3xxx_timer4_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPT4_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
 };
 
@@ -249,7 +244,6 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPT5_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
 };
 
@@ -267,7 +261,6 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPT6_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
 };
 
@@ -285,7 +278,6 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPT7_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
 };
 
@@ -1074,6 +1066,17 @@ static struct omap_hwmod_class omap3xxx_mcbsp_hwmod_class = {
 	.rev  = MCBSP_CONFIG_TYPE3,
 };
 
+/* McBSP functional clock mapping */
+static struct omap_hwmod_opt_clk mcbsp15_opt_clks[] = {
+	{ .role = "pad_fck", .clk = "mcbsp_clks" },
+	{ .role = "prcm_fck", .clk = "core_96m_fck" },
+};
+
+static struct omap_hwmod_opt_clk mcbsp234_opt_clks[] = {
+	{ .role = "pad_fck", .clk = "mcbsp_clks" },
+	{ .role = "prcm_fck", .clk = "per_96m_fck" },
+};
+
 /* mcbsp1 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = {
 	{ .name = "common", .irq = 16 },
@@ -1097,6 +1100,8 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_MCBSP1_SHIFT,
 		},
 	},
+	.opt_clks	= mcbsp15_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcbsp15_opt_clks),
 };
 
 /* mcbsp2 */
@@ -1126,6 +1131,8 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT,
 		},
 	},
+	.opt_clks	= mcbsp234_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcbsp234_opt_clks),
 	.dev_attr	= &omap34xx_mcbsp2_dev_attr,
 };
 
@@ -1156,6 +1163,8 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT,
 		},
 	},
+	.opt_clks	= mcbsp234_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcbsp234_opt_clks),
 	.dev_attr	= &omap34xx_mcbsp3_dev_attr,
 };
 
@@ -1188,6 +1197,8 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_MCBSP4_SHIFT,
 		},
 	},
+	.opt_clks	= mcbsp234_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcbsp234_opt_clks),
 };
 
 /* mcbsp5 */
@@ -1219,6 +1230,8 @@ static struct omap_hwmod omap3xxx_mcbsp5_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_MCBSP5_SHIFT,
 		},
 	},
+	.opt_clks	= mcbsp15_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcbsp15_opt_clks),
 };
 
 /* 'mcbsp sidetone' class */
@@ -3283,6 +3296,8 @@ int __init omap3xxx_hwmod_init(void)
 	struct omap_hwmod_ocp_if **h = NULL;
 	unsigned int rev;
 
+	omap_hwmod_init();
+
 	/* Register hwmod links common to all OMAP3 */
 	r = omap_hwmod_register_links(omap3xxx_hwmod_ocp_ifs);
 	if (r < 0)

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -2544,14 +2544,12 @@ static struct omap_hwmod omap44xx_prcm_mpu_hwmod = {
 static struct omap_hwmod omap44xx_cm_core_aon_hwmod = {
 	.name		= "cm_core_aon",
 	.class		= &omap44xx_prcm_hwmod_class,
-	.clkdm_name	= "cm_clkdm",
 };
 
 /* cm_core */
 static struct omap_hwmod omap44xx_cm_core_hwmod = {
 	.name		= "cm_core",
 	.class		= &omap44xx_prcm_hwmod_class,
-	.clkdm_name	= "cm_clkdm",
 };
 
 /* prm */
@@ -2568,7 +2566,6 @@ static struct omap_hwmod_rst_info omap44xx_prm_resets[] = {
 static struct omap_hwmod omap44xx_prm_hwmod = {
 	.name		= "prm",
 	.class		= &omap44xx_prcm_hwmod_class,
-	.clkdm_name	= "prm_clkdm",
 	.mpu_irqs	= omap44xx_prm_irqs,
 	.rst_lines	= omap44xx_prm_resets,
 	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_prm_resets),
@@ -2947,7 +2944,6 @@ static struct omap_hwmod omap44xx_timer2_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 };
 
 /* timer3 */
@@ -2969,7 +2965,6 @@ static struct omap_hwmod omap44xx_timer3_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 };
 
 /* timer4 */
@@ -2991,7 +2986,6 @@ static struct omap_hwmod omap44xx_timer4_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 };
 
 /* timer5 */
@@ -3013,7 +3007,6 @@ static struct omap_hwmod omap44xx_timer5_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 };
 
 /* timer6 */
@@ -3036,7 +3029,6 @@ static struct omap_hwmod omap44xx_timer6_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 };
 
 /* timer7 */
@@ -3058,7 +3050,6 @@ static struct omap_hwmod omap44xx_timer7_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 };
 
 /* timer8 */
@@ -6148,6 +6139,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 
 int __init omap44xx_hwmod_init(void)
 {
+	omap_hwmod_init();
 	return omap_hwmod_register_links(omap44xx_hwmod_ocp_ifs);
 }
 

arch/arm/mach-omap2/omap_hwmod_common_data.c

@@ -47,6 +47,16 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = {
 	.midle_shift	= SYSC_TYPE2_MIDLEMODE_SHIFT,
 	.sidle_shift	= SYSC_TYPE2_SIDLEMODE_SHIFT,
 	.srst_shift	= SYSC_TYPE2_SOFTRESET_SHIFT,
+	.dmadisable_shift = SYSC_TYPE2_DMADISABLE_SHIFT,
+};
+
+/**
+ * struct omap_hwmod_sysc_type3 - TYPE3 sysconfig scheme.
+ * Used by some IPs on AM33xx
+ */
+struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3 = {
+	.midle_shift	= SYSC_TYPE3_MIDLEMODE_SHIFT,
+	.sidle_shift	= SYSC_TYPE3_SIDLEMODE_SHIFT,
 };
 
 struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = {

arch/arm/mach-omap2/powerdomain.c

@@ -526,7 +526,8 @@ int pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
  *
  * Return the powerdomain @pwrdm's current power state.	Returns -EINVAL
  * if the powerdomain pointer is null or returns the current power state
- * upon success.
+ * upon success. Note that if the power domain only supports the ON state
+ * then just return ON as the current state.
  */
 int pwrdm_read_pwrst(struct powerdomain *pwrdm)
 {
@@ -535,6 +536,9 @@ int pwrdm_read_pwrst(struct powerdomain *pwrdm)
 	if (!pwrdm)
 		return -EINVAL;
 
+	if (pwrdm->pwrsts == PWRSTS_ON)
+		return PWRDM_POWER_ON;
+
 	if (arch_pwrdm && arch_pwrdm->pwrdm_read_pwrst)
 		ret = arch_pwrdm->pwrdm_read_pwrst(pwrdm);
 

arch/arm/mach-omap2/powerdomain.h

@@ -67,9 +67,9 @@
 
 /*
  * Maximum number of clockdomains that can be associated with a powerdomain.
- * CORE powerdomain on OMAP4 is the worst case
+ * PER powerdomain on AM33XX is the worst case
  */
-#define PWRDM_MAX_CLKDMS	9
+#define PWRDM_MAX_CLKDMS	11
 
 /* XXX A completely arbitrary number. What is reasonable here? */
 #define PWRDM_TRANSITION_BAILOUT 100000
@@ -92,6 +92,15 @@ struct powerdomain;
  * @pwrdm_clkdms: Clockdomains in this powerdomain
  * @node: list_head linking all powerdomains
  * @voltdm_node: list_head linking all powerdomains in a voltagedomain
+ * @pwrstctrl_offs: (AM33XX only) XXX_PWRSTCTRL reg offset from prcm_offs
+ * @pwrstst_offs: (AM33XX only) XXX_PWRSTST reg offset from prcm_offs
+ * @logicretstate_mask: (AM33XX only) mask for logic retention bitfield
+ *	in @pwrstctrl_offs
+ * @mem_on_mask: (AM33XX only) mask for mem on bitfield in @pwrstctrl_offs
+ * @mem_ret_mask: (AM33XX only) mask for mem ret bitfield in @pwrstctrl_offs
+ * @mem_pwrst_mask: (AM33XX only) mask for mem state bitfield in @pwrstst_offs
+ * @mem_retst_mask: (AM33XX only) mask for mem retention state bitfield
+ *	in @pwrstctrl_offs
  * @state:
  * @state_counter:
  * @timer:
@@ -121,6 +130,14 @@ struct powerdomain {
 	unsigned ret_logic_off_counter;
 	unsigned ret_mem_off_counter[PWRDM_MAX_MEM_BANKS];
 
+	const u8 pwrstctrl_offs;
+	const u8 pwrstst_offs;
+	const u32 logicretstate_mask;
+	const u32 mem_on_mask[PWRDM_MAX_MEM_BANKS];
+	const u32 mem_ret_mask[PWRDM_MAX_MEM_BANKS];
+	const u32 mem_pwrst_mask[PWRDM_MAX_MEM_BANKS];
+	const u32 mem_retst_mask[PWRDM_MAX_MEM_BANKS];
+
 #ifdef CONFIG_PM_DEBUG
 	s64 timer;
 	s64 state_timer[PWRDM_MAX_PWRSTS];
@@ -222,10 +239,12 @@ bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
 extern void omap242x_powerdomains_init(void);
 extern void omap243x_powerdomains_init(void);
 extern void omap3xxx_powerdomains_init(void);
+extern void am33xx_powerdomains_init(void);
 extern void omap44xx_powerdomains_init(void);
 
 extern struct pwrdm_ops omap2_pwrdm_operations;
 extern struct pwrdm_ops omap3_pwrdm_operations;
+extern struct pwrdm_ops am33xx_pwrdm_operations;
 extern struct pwrdm_ops omap4_pwrdm_operations;
 
 /* Common Internal functions used across OMAP rev's */

arch/arm/mach-omap2/powerdomain33xx.c

+/*
+ * AM33XX Powerdomain control
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Derived from mach-omap2/powerdomain44xx.c written by Rajendra Nayak
+ * <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include <plat/prcm.h>
+
+#include "powerdomain.h"
+#include "prm33xx.h"
+#include "prm-regbits-33xx.h"
+
+
+static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+	am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK,
+				(pwrst << OMAP_POWERSTATE_SHIFT),
+				pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+	return 0;
+}
+
+static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+	u32 v;
+
+	v = am33xx_prm_read_reg(pwrdm->prcm_offs,  pwrdm->pwrstctrl_offs);
+	v &= OMAP_POWERSTATE_MASK;
+	v >>= OMAP_POWERSTATE_SHIFT;
+
+	return v;
+}
+
+static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+	u32 v;
+
+	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+	v &= OMAP_POWERSTATEST_MASK;
+	v >>= OMAP_POWERSTATEST_SHIFT;
+
+	return v;
+}
+
+static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
+{
+	u32 v;
+
+	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+	v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
+	v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
+
+	return v;
+}
+
+static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
+{
+	am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
+				(1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT),
+				pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+	return 0;
+}
+
+static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
+{
+	am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK,
+				AM33XX_LASTPOWERSTATEENTERED_MASK,
+				pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+	return 0;
+}
+
+static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
+{
+	u32 m;
+
+	m = pwrdm->logicretstate_mask;
+	if (!m)
+		return -EINVAL;
+
+	am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+				pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+	return 0;
+}
+
+static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+	u32 v;
+
+	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+	v &= AM33XX_LOGICSTATEST_MASK;
+	v >>= AM33XX_LOGICSTATEST_SHIFT;
+
+	return v;
+}
+
+static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
+{
+	u32 v, m;
+
+	m = pwrdm->logicretstate_mask;
+	if (!m)
+		return -EINVAL;
+
+	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+	v &= m;
+	v >>= __ffs(m);
+
+	return v;
+}
+
+static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+		u8 pwrst)
+{
+	u32 m;
+
+	m = pwrdm->mem_on_mask[bank];
+	if (!m)
+		return -EINVAL;
+
+	am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+				pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+	return 0;
+}
+
+static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+					u8 pwrst)
+{
+	u32 m;
+
+	m = pwrdm->mem_ret_mask[bank];
+	if (!m)
+		return -EINVAL;
+
+	am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+				pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+	return 0;
+}
+
+static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+	u32 m, v;
+
+	m = pwrdm->mem_pwrst_mask[bank];
+	if (!m)
+		return -EINVAL;
+
+	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+	v &= m;
+	v >>= __ffs(m);
+
+	return v;
+}
+
+static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
+{
+	u32 m, v;
+
+	m = pwrdm->mem_retst_mask[bank];
+	if (!m)
+		return -EINVAL;
+
+	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+	v &= m;
+	v >>= __ffs(m);
+
+	return v;
+}
+
+static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm)
+{
+	u32 c = 0;
+
+	/*
+	 * REVISIT: pwrdm_wait_transition() may be better implemented
+	 * via a callback and a periodic timer check -- how long do we expect
+	 * powerdomain transitions to take?
+	 */
+
+	/* XXX Is this udelay() value meaningful? */
+	while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs)
+			& OMAP_INTRANSITION_MASK) &&
+			(c++ < PWRDM_TRANSITION_BAILOUT))
+		udelay(1);
+
+	if (c > PWRDM_TRANSITION_BAILOUT) {
+		pr_err("powerdomain: %s: waited too long to complete transition\n",
+		       pwrdm->name);
+		return -EAGAIN;
+	}
+
+	pr_debug("powerdomain: completed transition in %d loops\n", c);
+
+	return 0;
+}
+
+struct pwrdm_ops am33xx_pwrdm_operations = {
+	.pwrdm_set_next_pwrst		= am33xx_pwrdm_set_next_pwrst,
+	.pwrdm_read_next_pwrst		= am33xx_pwrdm_read_next_pwrst,
+	.pwrdm_read_pwrst		= am33xx_pwrdm_read_pwrst,
+	.pwrdm_read_prev_pwrst		= am33xx_pwrdm_read_prev_pwrst,
+	.pwrdm_set_logic_retst		= am33xx_pwrdm_set_logic_retst,
+	.pwrdm_read_logic_pwrst		= am33xx_pwrdm_read_logic_pwrst,
+	.pwrdm_read_logic_retst		= am33xx_pwrdm_read_logic_retst,
+	.pwrdm_clear_all_prev_pwrst	= am33xx_pwrdm_clear_all_prev_pwrst,
+	.pwrdm_set_lowpwrstchange	= am33xx_pwrdm_set_lowpwrstchange,
+	.pwrdm_read_mem_pwrst		= am33xx_pwrdm_read_mem_pwrst,
+	.pwrdm_read_mem_retst		= am33xx_pwrdm_read_mem_retst,
+	.pwrdm_set_mem_onst		= am33xx_pwrdm_set_mem_onst,
+	.pwrdm_set_mem_retst		= am33xx_pwrdm_set_mem_retst,
+	.pwrdm_wait_transition		= am33xx_pwrdm_wait_transition,
+};

arch/arm/mach-omap2/powerdomains33xx_data.c

+/*
+ * AM33XX Power domain data
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "powerdomain.h"
+#include "prcm-common.h"
+#include "prm-regbits-33xx.h"
+#include "prm33xx.h"
+
+static struct powerdomain gfx_33xx_pwrdm = {
+	.name			= "gfx_pwrdm",
+	.voltdm			= { .name = "core" },
+	.prcm_offs		= AM33XX_PRM_GFX_MOD,
+	.pwrstctrl_offs		= AM33XX_PM_GFX_PWRSTCTRL_OFFSET,
+	.pwrstst_offs		= AM33XX_PM_GFX_PWRSTST_OFFSET,
+	.pwrsts			= PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret	= PWRSTS_OFF_RET,
+	.flags			= PWRDM_HAS_LOWPOWERSTATECHANGE,
+	.banks			= 1,
+	.logicretstate_mask	= AM33XX_LOGICRETSTATE_MASK,
+	.mem_on_mask		= {
+		[0]		= AM33XX_GFX_MEM_ONSTATE_MASK,	/* gfx_mem */
+	},
+	.mem_ret_mask		= {
+		[0]		= AM33XX_GFX_MEM_RETSTATE_MASK,	/* gfx_mem */
+	},
+	.mem_pwrst_mask		= {
+		[0]		= AM33XX_GFX_MEM_STATEST_MASK,	/* gfx_mem */
+	},
+	.mem_retst_mask		= {
+		[0]		= AM33XX_GFX_MEM_RETSTATE_MASK,	/* gfx_mem */
+	},
+	.pwrsts_mem_ret		= {
+		[0]		= PWRSTS_OFF_RET,	/* gfx_mem */
+	},
+	.pwrsts_mem_on		= {
+		[0]		= PWRSTS_ON,		/* gfx_mem */
+	},
+};
+
+static struct powerdomain rtc_33xx_pwrdm = {
+	.name			= "rtc_pwrdm",
+	.voltdm			= { .name = "rtc" },
+	.prcm_offs		= AM33XX_PRM_RTC_MOD,
+	.pwrstctrl_offs		= AM33XX_PM_RTC_PWRSTCTRL_OFFSET,
+	.pwrstst_offs		= AM33XX_PM_RTC_PWRSTST_OFFSET,
+	.pwrsts			= PWRSTS_ON,
+	.logicretstate_mask	= AM33XX_LOGICRETSTATE_MASK,
+};
+
+static struct powerdomain wkup_33xx_pwrdm = {
+	.name			= "wkup_pwrdm",
+	.voltdm			= { .name = "core" },
+	.prcm_offs		= AM33XX_PRM_WKUP_MOD,
+	.pwrstctrl_offs		= AM33XX_PM_WKUP_PWRSTCTRL_OFFSET,
+	.pwrstst_offs		= AM33XX_PM_WKUP_PWRSTST_OFFSET,
+	.pwrsts			= PWRSTS_ON,
+	.logicretstate_mask	= AM33XX_LOGICRETSTATE_3_3_MASK,
+};
+
+static struct powerdomain per_33xx_pwrdm = {
+	.name			= "per_pwrdm",
+	.voltdm			= { .name = "core" },
+	.prcm_offs		= AM33XX_PRM_PER_MOD,
+	.pwrstctrl_offs		= AM33XX_PM_PER_PWRSTCTRL_OFFSET,
+	.pwrstst_offs		= AM33XX_PM_PER_PWRSTST_OFFSET,
+	.pwrsts			= PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret	= PWRSTS_OFF_RET,
+	.flags			= PWRDM_HAS_LOWPOWERSTATECHANGE,
+	.banks			= 3,
+	.logicretstate_mask	= AM33XX_LOGICRETSTATE_3_3_MASK,
+	.mem_on_mask		= {
+		[0]		= AM33XX_PRUSS_MEM_ONSTATE_MASK, /* pruss_mem */
+		[1]		= AM33XX_PER_MEM_ONSTATE_MASK,	/* per_mem */
+		[2]		= AM33XX_RAM_MEM_ONSTATE_MASK,	/* ram_mem */
+	},
+	.mem_ret_mask		= {
+		[0]		= AM33XX_PRUSS_MEM_RETSTATE_MASK, /* pruss_mem */
+		[1]		= AM33XX_PER_MEM_RETSTATE_MASK,	/* per_mem */
+		[2]		= AM33XX_RAM_MEM_RETSTATE_MASK,	/* ram_mem */
+	},
+	.mem_pwrst_mask		= {
+		[0]		= AM33XX_PRUSS_MEM_STATEST_MASK, /* pruss_mem */
+		[1]		= AM33XX_PER_MEM_STATEST_MASK,	/* per_mem */
+		[2]		= AM33XX_RAM_MEM_STATEST_MASK,	/* ram_mem */
+	},
+	.mem_retst_mask		= {
+		[0]		= AM33XX_PRUSS_MEM_RETSTATE_MASK, /* pruss_mem */
+		[1]		= AM33XX_PER_MEM_RETSTATE_MASK,	/* per_mem */
+		[2]		= AM33XX_RAM_MEM_RETSTATE_MASK,	/* ram_mem */
+	},
+	.pwrsts_mem_ret		= {
+		[0]		= PWRSTS_OFF_RET,	/* pruss_mem */
+		[1]		= PWRSTS_OFF_RET,	/* per_mem */
+		[2]		= PWRSTS_OFF_RET,	/* ram_mem */
+	},
+	.pwrsts_mem_on		= {
+		[0]		= PWRSTS_ON,		/* pruss_mem */
+		[1]		= PWRSTS_ON,		/* per_mem */
+		[2]		= PWRSTS_ON,		/* ram_mem */
+	},
+};
+
+static struct powerdomain mpu_33xx_pwrdm = {
+	.name			= "mpu_pwrdm",
+	.voltdm			= { .name = "mpu" },
+	.prcm_offs		= AM33XX_PRM_MPU_MOD,
+	.pwrstctrl_offs		= AM33XX_PM_MPU_PWRSTCTRL_OFFSET,
+	.pwrstst_offs		= AM33XX_PM_MPU_PWRSTST_OFFSET,
+	.pwrsts			= PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret	= PWRSTS_OFF_RET,
+	.flags			= PWRDM_HAS_LOWPOWERSTATECHANGE,
+	.banks			= 3,
+	.logicretstate_mask	= AM33XX_LOGICRETSTATE_MASK,
+	.mem_on_mask		= {
+		[0]		= AM33XX_MPU_L1_ONSTATE_MASK,	/* mpu_l1 */
+		[1]		= AM33XX_MPU_L2_ONSTATE_MASK,	/* mpu_l2 */
+		[2]		= AM33XX_MPU_RAM_ONSTATE_MASK,	/* mpu_ram */
+	},
+	.mem_ret_mask		= {
+		[0]		= AM33XX_MPU_L1_RETSTATE_MASK,	/* mpu_l1 */
+		[1]		= AM33XX_MPU_L2_RETSTATE_MASK,	/* mpu_l2 */
+		[2]		= AM33XX_MPU_RAM_RETSTATE_MASK,	/* mpu_ram */
+	},
+	.mem_pwrst_mask		= {
+		[0]		= AM33XX_MPU_L1_STATEST_MASK,	/* mpu_l1 */
+		[1]		= AM33XX_MPU_L2_STATEST_MASK,	/* mpu_l2 */
+		[2]		= AM33XX_MPU_RAM_STATEST_MASK,	/* mpu_ram */
+	},
+	.mem_retst_mask		= {
+		[0]		= AM33XX_MPU_L1_RETSTATE_MASK,	/* mpu_l1 */
+		[1]		= AM33XX_MPU_L2_RETSTATE_MASK,	/* mpu_l2 */
+		[2]		= AM33XX_MPU_RAM_RETSTATE_MASK,	/* mpu_ram */
+	},
+	.pwrsts_mem_ret		= {
+		[0]		= PWRSTS_OFF_RET,	/* mpu_l1 */
+		[1]		= PWRSTS_OFF_RET,	/* mpu_l2 */
+		[2]		= PWRSTS_OFF_RET,	/* mpu_ram */
+	},
+	.pwrsts_mem_on		= {
+		[0]		= PWRSTS_ON,		/* mpu_l1 */
+		[1]		= PWRSTS_ON,		/* mpu_l2 */
+		[2]		= PWRSTS_ON,		/* mpu_ram */
+	},
+};
+
+static struct powerdomain cefuse_33xx_pwrdm = {
+	.name		= "cefuse_pwrdm",
+	.voltdm		= { .name = "core" },
+	.prcm_offs	= AM33XX_PRM_CEFUSE_MOD,
+	.pwrstctrl_offs	= AM33XX_PM_CEFUSE_PWRSTCTRL_OFFSET,
+	.pwrstst_offs	= AM33XX_PM_CEFUSE_PWRSTST_OFFSET,
+	.pwrsts		= PWRSTS_OFF_ON,
+};
+
+static struct powerdomain *powerdomains_am33xx[] __initdata = {
+	&gfx_33xx_pwrdm,
+	&rtc_33xx_pwrdm,
+	&wkup_33xx_pwrdm,
+	&per_33xx_pwrdm,
+	&mpu_33xx_pwrdm,
+	&cefuse_33xx_pwrdm,
+	NULL,
+};
+
+void __init am33xx_powerdomains_init(void)
+{
+	pwrdm_register_platform_funcs(&am33xx_pwrdm_operations);
+	pwrdm_register_pwrdms(powerdomains_am33xx);
+	pwrdm_complete_init();
+}

arch/arm/mach-omap2/prcm.c

@@ -35,6 +35,7 @@
 #include "prm2xxx_3xxx.h"
 #include "prm44xx.h"
 #include "prminst44xx.h"
+#include "cminst44xx.h"
 #include "prm-regbits-24xx.h"
 #include "prm-regbits-44xx.h"
 #include "control.h"
@@ -164,3 +165,25 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
 		omap_cm_base_init();
 	}
 }
+
+/*
+ * Stubbed functions so that common files continue to build when
+ * custom builds are used
+ * XXX These are temporary and should be removed at the earliest possible
+ * opportunity
+ */
+int __weak omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
+					u16 clkctrl_offs)
+{
+	return 0;
+}
+
+void __weak omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
+				s16 cdoffs, u16 clkctrl_offs)
+{
+}
+
+void __weak omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
+				 u16 clkctrl_offs)
+{
+}

arch/arm/mach-omap2/prm-regbits-33xx.h

+/*
+ * AM33XX PRM_XXX register bits
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_33XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_33XX_H
+
+#include "prm.h"
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ABBOFF_ACT_EXPORT_SHIFT			1
+#define AM33XX_ABBOFF_ACT_EXPORT_MASK			(1 << 1)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ABBOFF_SLEEP_EXPORT_SHIFT		2
+#define AM33XX_ABBOFF_SLEEP_EXPORT_MASK			(1 << 2)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_AIPOFF_SHIFT				8
+#define AM33XX_AIPOFF_MASK				(1 << 8)
+
+/* Used by PM_WKUP_PWRSTST */
+#define AM33XX_DEBUGSS_MEM_STATEST_SHIFT		17
+#define AM33XX_DEBUGSS_MEM_STATEST_MASK			(0x3 << 17)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_DISABLE_RTA_EXPORT_SHIFT			0
+#define AM33XX_DISABLE_RTA_EXPORT_MASK			(1 << 0)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_DPLL_CORE_RECAL_EN_SHIFT			12
+#define AM33XX_DPLL_CORE_RECAL_EN_MASK			(1 << 12)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_DPLL_CORE_RECAL_ST_SHIFT			12
+#define AM33XX_DPLL_CORE_RECAL_ST_MASK			(1 << 12)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_DPLL_DDR_RECAL_EN_SHIFT			14
+#define AM33XX_DPLL_DDR_RECAL_EN_MASK			(1 << 14)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_DPLL_DDR_RECAL_ST_SHIFT			14
+#define AM33XX_DPLL_DDR_RECAL_ST_MASK			(1 << 14)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_DPLL_DISP_RECAL_EN_SHIFT			15
+#define AM33XX_DPLL_DISP_RECAL_EN_MASK			(1 << 15)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_DPLL_DISP_RECAL_ST_SHIFT			13
+#define AM33XX_DPLL_DISP_RECAL_ST_MASK			(1 << 13)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_DPLL_MPU_RECAL_EN_SHIFT			11
+#define AM33XX_DPLL_MPU_RECAL_EN_MASK			(1 << 11)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_DPLL_MPU_RECAL_ST_SHIFT			11
+#define AM33XX_DPLL_MPU_RECAL_ST_MASK			(1 << 11)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_DPLL_PER_RECAL_EN_SHIFT			13
+#define AM33XX_DPLL_PER_RECAL_EN_MASK			(1 << 13)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_DPLL_PER_RECAL_ST_SHIFT			15
+#define AM33XX_DPLL_PER_RECAL_ST_MASK			(1 << 15)
+
+/* Used by RM_WKUP_RSTST */
+#define AM33XX_EMULATION_M3_RST_SHIFT			6
+#define AM33XX_EMULATION_M3_RST_MASK			(1 << 6)
+
+/* Used by RM_MPU_RSTST */
+#define AM33XX_EMULATION_MPU_RST_SHIFT			5
+#define AM33XX_EMULATION_MPU_RST_MASK			(1 << 5)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ENFUNC1_EXPORT_SHIFT			3
+#define AM33XX_ENFUNC1_EXPORT_MASK			(1 << 3)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ENFUNC3_EXPORT_SHIFT			5
+#define AM33XX_ENFUNC3_EXPORT_MASK			(1 << 5)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ENFUNC4_SHIFT				6
+#define AM33XX_ENFUNC4_MASK				(1 << 6)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ENFUNC5_SHIFT				7
+#define AM33XX_ENFUNC5_MASK				(1 << 7)
+
+/* Used by PRM_RSTST */
+#define AM33XX_EXTERNAL_WARM_RST_SHIFT			5
+#define AM33XX_EXTERNAL_WARM_RST_MASK			(1 << 5)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_FORCEWKUP_EN_SHIFT			10
+#define AM33XX_FORCEWKUP_EN_MASK			(1 << 10)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_FORCEWKUP_ST_SHIFT			10
+#define AM33XX_FORCEWKUP_ST_MASK			(1 << 10)
+
+/* Used by PM_GFX_PWRSTCTRL */
+#define AM33XX_GFX_MEM_ONSTATE_SHIFT			17
+#define AM33XX_GFX_MEM_ONSTATE_MASK			(0x3 << 17)
+
+/* Used by PM_GFX_PWRSTCTRL */
+#define AM33XX_GFX_MEM_RETSTATE_SHIFT			6
+#define AM33XX_GFX_MEM_RETSTATE_MASK			(1 << 6)
+
+/* Used by PM_GFX_PWRSTST */
+#define AM33XX_GFX_MEM_STATEST_SHIFT			4
+#define AM33XX_GFX_MEM_STATEST_MASK			(0x3 << 4)
+
+/* Used by RM_GFX_RSTCTRL, RM_GFX_RSTST */
+#define AM33XX_GFX_RST_SHIFT				0
+#define AM33XX_GFX_RST_MASK				(1 << 0)
+
+/* Used by PRM_RSTST */
+#define AM33XX_GLOBAL_COLD_RST_SHIFT			0
+#define AM33XX_GLOBAL_COLD_RST_MASK			(1 << 0)
+
+/* Used by PRM_RSTST */
+#define AM33XX_GLOBAL_WARM_SW_RST_SHIFT			1
+#define AM33XX_GLOBAL_WARM_SW_RST_MASK			(1 << 1)
+
+/* Used by RM_WKUP_RSTST */
+#define AM33XX_ICECRUSHER_M3_RST_SHIFT			7
+#define AM33XX_ICECRUSHER_M3_RST_MASK			(1 << 7)
+
+/* Used by RM_MPU_RSTST */
+#define AM33XX_ICECRUSHER_MPU_RST_SHIFT			6
+#define AM33XX_ICECRUSHER_MPU_RST_MASK			(1 << 6)
+
+/* Used by PRM_RSTST */
+#define AM33XX_ICEPICK_RST_SHIFT			9
+#define AM33XX_ICEPICK_RST_MASK				(1 << 9)
+
+/* Used by RM_PER_RSTCTRL */
+#define AM33XX_PRUSS_LRST_SHIFT				1
+#define AM33XX_PRUSS_LRST_MASK				(1 << 1)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_PRUSS_MEM_ONSTATE_SHIFT			5
+#define AM33XX_PRUSS_MEM_ONSTATE_MASK			(0x3 << 5)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_PRUSS_MEM_RETSTATE_SHIFT			7
+#define AM33XX_PRUSS_MEM_RETSTATE_MASK			(1 << 7)
+
+/* Used by PM_PER_PWRSTST */
+#define AM33XX_PRUSS_MEM_STATEST_SHIFT			23
+#define AM33XX_PRUSS_MEM_STATEST_MASK			(0x3 << 23)
+
+/*
+ * Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST,
+ * PM_WKUP_PWRSTST, PM_RTC_PWRSTST
+ */
+#define AM33XX_INTRANSITION_SHIFT			20
+#define AM33XX_INTRANSITION_MASK			(1 << 20)
+
+/* Used by PM_CEFUSE_PWRSTST */
+#define AM33XX_LASTPOWERSTATEENTERED_SHIFT		24
+#define AM33XX_LASTPOWERSTATEENTERED_MASK		(0x3 << 24)
+
+/* Used by PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_RTC_PWRSTCTRL */
+#define AM33XX_LOGICRETSTATE_SHIFT			2
+#define AM33XX_LOGICRETSTATE_MASK			(1 << 2)
+
+/* Renamed from LOGICRETSTATE Used by PM_PER_PWRSTCTRL, PM_WKUP_PWRSTCTRL */
+#define AM33XX_LOGICRETSTATE_3_3_SHIFT			3
+#define AM33XX_LOGICRETSTATE_3_3_MASK			(1 << 3)
+
+/*
+ * Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST,
+ * PM_WKUP_PWRSTST, PM_RTC_PWRSTST
+ */
+#define AM33XX_LOGICSTATEST_SHIFT			2
+#define AM33XX_LOGICSTATEST_MASK			(1 << 2)
+
+/*
+ * Used by PM_GFX_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, PM_PER_PWRSTCTRL,
+ * PM_MPU_PWRSTCTRL, PM_WKUP_PWRSTCTRL, PM_RTC_PWRSTCTRL
+ */
+#define AM33XX_LOWPOWERSTATECHANGE_SHIFT		4
+#define AM33XX_LOWPOWERSTATECHANGE_MASK			(1 << 4)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_L1_ONSTATE_SHIFT			18
+#define AM33XX_MPU_L1_ONSTATE_MASK			(0x3 << 18)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_L1_RETSTATE_SHIFT			22
+#define AM33XX_MPU_L1_RETSTATE_MASK			(1 << 22)
+
+/* Used by PM_MPU_PWRSTST */
+#define AM33XX_MPU_L1_STATEST_SHIFT			6
+#define AM33XX_MPU_L1_STATEST_MASK			(0x3 << 6)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_L2_ONSTATE_SHIFT			20
+#define AM33XX_MPU_L2_ONSTATE_MASK			(0x3 << 20)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_L2_RETSTATE_SHIFT			23
+#define AM33XX_MPU_L2_RETSTATE_MASK			(1 << 23)
+
+/* Used by PM_MPU_PWRSTST */
+#define AM33XX_MPU_L2_STATEST_SHIFT			8
+#define AM33XX_MPU_L2_STATEST_MASK			(0x3 << 8)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_RAM_ONSTATE_SHIFT			16
+#define AM33XX_MPU_RAM_ONSTATE_MASK			(0x3 << 16)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_RAM_RETSTATE_SHIFT			24
+#define AM33XX_MPU_RAM_RETSTATE_MASK			(1 << 24)
+
+/* Used by PM_MPU_PWRSTST */
+#define AM33XX_MPU_RAM_STATEST_SHIFT			4
+#define AM33XX_MPU_RAM_STATEST_MASK			(0x3 << 4)
+
+/* Used by PRM_RSTST */
+#define AM33XX_MPU_SECURITY_VIOL_RST_SHIFT		2
+#define AM33XX_MPU_SECURITY_VIOL_RST_MASK		(1 << 2)
+
+/* Used by PRM_SRAM_COUNT */
+#define AM33XX_PCHARGECNT_VALUE_SHIFT			0
+#define AM33XX_PCHARGECNT_VALUE_MASK			(0x3f << 0)
+
+/* Used by RM_PER_RSTCTRL */
+#define AM33XX_PCI_LRST_SHIFT				0
+#define AM33XX_PCI_LRST_MASK				(1 << 0)
+
+/* Renamed from PCI_LRST Used by RM_PER_RSTST */
+#define AM33XX_PCI_LRST_5_5_SHIFT			5
+#define AM33XX_PCI_LRST_5_5_MASK			(1 << 5)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_PER_MEM_ONSTATE_SHIFT			25
+#define AM33XX_PER_MEM_ONSTATE_MASK			(0x3 << 25)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_PER_MEM_RETSTATE_SHIFT			29
+#define AM33XX_PER_MEM_RETSTATE_MASK			(1 << 29)
+
+/* Used by PM_PER_PWRSTST */
+#define AM33XX_PER_MEM_STATEST_SHIFT			17
+#define AM33XX_PER_MEM_STATEST_MASK			(0x3 << 17)
+
+/*
+ * Used by PM_GFX_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, PM_PER_PWRSTCTRL,
+ * PM_MPU_PWRSTCTRL
+ */
+#define AM33XX_POWERSTATE_SHIFT				0
+#define AM33XX_POWERSTATE_MASK				(0x3 << 0)
+
+/* Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST */
+#define AM33XX_POWERSTATEST_SHIFT			0
+#define AM33XX_POWERSTATEST_MASK			(0x3 << 0)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_RAM_MEM_ONSTATE_SHIFT			30
+#define AM33XX_RAM_MEM_ONSTATE_MASK			(0x3 << 30)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_RAM_MEM_RETSTATE_SHIFT			27
+#define AM33XX_RAM_MEM_RETSTATE_MASK			(1 << 27)
+
+/* Used by PM_PER_PWRSTST */
+#define AM33XX_RAM_MEM_STATEST_SHIFT			21
+#define AM33XX_RAM_MEM_STATEST_MASK			(0x3 << 21)
+
+/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */
+#define AM33XX_RETMODE_ENABLE_SHIFT			0
+#define AM33XX_RETMODE_ENABLE_MASK			(1 << 0)
+
+/* Used by REVISION_PRM */
+#define AM33XX_REV_SHIFT				0
+#define AM33XX_REV_MASK					(0xff << 0)
+
+/* Used by PRM_RSTTIME */
+#define AM33XX_RSTTIME1_SHIFT				0
+#define AM33XX_RSTTIME1_MASK				(0xff << 0)
+
+/* Used by PRM_RSTTIME */
+#define AM33XX_RSTTIME2_SHIFT				8
+#define AM33XX_RSTTIME2_MASK				(0x1f << 8)
+
+/* Used by PRM_RSTCTRL */
+#define AM33XX_RST_GLOBAL_COLD_SW_SHIFT			1
+#define AM33XX_RST_GLOBAL_COLD_SW_MASK			(1 << 1)
+
+/* Used by PRM_RSTCTRL */
+#define AM33XX_RST_GLOBAL_WARM_SW_SHIFT			0
+#define AM33XX_RST_GLOBAL_WARM_SW_MASK			(1 << 0)
+
+/* Used by PRM_SRAM_COUNT */
+#define AM33XX_SLPCNT_VALUE_SHIFT			16
+#define AM33XX_SLPCNT_VALUE_MASK			(0xff << 16)
+
+/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */
+#define AM33XX_SRAMLDO_STATUS_SHIFT			8
+#define AM33XX_SRAMLDO_STATUS_MASK			(1 << 8)
+
+/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */
+#define AM33XX_SRAM_IN_TRANSITION_SHIFT			9
+#define AM33XX_SRAM_IN_TRANSITION_MASK			(1 << 9)
+
+/* Used by PRM_SRAM_COUNT */
+#define AM33XX_STARTUP_COUNT_SHIFT			24
+#define AM33XX_STARTUP_COUNT_MASK			(0xff << 24)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_TRANSITION_EN_SHIFT			8
+#define AM33XX_TRANSITION_EN_MASK			(1 << 8)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_TRANSITION_ST_SHIFT			8
+#define AM33XX_TRANSITION_ST_MASK			(1 << 8)
+
+/* Used by PRM_SRAM_COUNT */
+#define AM33XX_VSETUPCNT_VALUE_SHIFT			8
+#define AM33XX_VSETUPCNT_VALUE_MASK			(0xff << 8)
+
+/* Used by PRM_RSTST */
+#define AM33XX_WDT0_RST_SHIFT				3
+#define AM33XX_WDT0_RST_MASK				(1 << 3)
+
+/* Used by PRM_RSTST */
+#define AM33XX_WDT1_RST_SHIFT				4
+#define AM33XX_WDT1_RST_MASK				(1 << 4)
+
+/* Used by RM_WKUP_RSTCTRL */
+#define AM33XX_WKUP_M3_LRST_SHIFT			3
+#define AM33XX_WKUP_M3_LRST_MASK			(1 << 3)
+
+/* Renamed from WKUP_M3_LRST Used by RM_WKUP_RSTST */
+#define AM33XX_WKUP_M3_LRST_5_5_SHIFT			5
+#define AM33XX_WKUP_M3_LRST_5_5_MASK			(1 << 5)
+
+#endif

arch/arm/mach-omap2/prm2xxx_3xxx.h

@@ -228,68 +228,6 @@
 
 
 #ifndef __ASSEMBLER__
-/*
- * Stub omap2xxx/omap3xxx functions so that common files
- * continue to build when custom builds are used
- */
-#if defined(CONFIG_ARCH_OMAP4) && !(defined(CONFIG_ARCH_OMAP2) ||	\
-					defined(CONFIG_ARCH_OMAP3))
-static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-}
-static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
-		s16 module, s16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
-						u8 st_shift)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-#else
 /* Power/reset management domain register get/set */
 extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx);
 extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx);
@@ -320,9 +258,6 @@ extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
 extern void omap3xxx_prm_ocp_barrier(void);
 extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
 extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
-
-#endif	/* CONFIG_ARCH_OMAP4 */
-
 #endif
 
 /*

arch/arm/mach-omap2/prm33xx.c

+/*
+ * AM33XX PRM functions
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+
+#include "common.h"
+#include "prm33xx.h"
+#include "prm-regbits-33xx.h"
+
+/* Read a register in a PRM instance */
+u32 am33xx_prm_read_reg(s16 inst, u16 idx)
+{
+	return __raw_readl(prm_base + inst + idx);
+}
+
+/* Write into a register in a PRM instance */
+void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx)
+{
+	__raw_writel(val, prm_base + inst + idx);
+}
+
+/* Read-modify-write a register in PRM. Caller must lock */
+u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
+{
+	u32 v;
+
+	v = am33xx_prm_read_reg(inst, idx);
+	v &= ~mask;
+	v |= bits;
+	am33xx_prm_write_reg(v, inst, idx);
+
+	return v;
+}
+
+/**
+ * am33xx_prm_is_hardreset_asserted - read the HW reset line state of
+ * submodules contained in the hwmod module
+ * @shift: register bit shift corresponding to the reset line to check
+ * @inst: CM instance register offset (*_INST macro)
+ * @rstctrl_offs: RM_RSTCTRL register address offset for this module
+ *
+ * Returns 1 if the (sub)module hardreset line is currently asserted,
+ * 0 if the (sub)module hardreset line is not currently asserted, or
+ * -EINVAL upon parameter error.
+ */
+int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, u16 rstctrl_offs)
+{
+	u32 v;
+
+	v = am33xx_prm_read_reg(inst, rstctrl_offs);
+	v &= 1 << shift;
+	v >>= shift;
+
+	return v;
+}
+
+/**
+ * am33xx_prm_assert_hardreset - assert the HW reset line of a submodule
+ * @shift: register bit shift corresponding to the reset line to assert
+ * @inst: CM instance register offset (*_INST macro)
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ *
+ * Some IPs like dsp, ipu or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP.  These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block.  This function will
+ * place the submodule into reset.  Returns 0 upon success or -EINVAL
+ * upon an argument error.
+ */
+int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs)
+{
+	u32 mask = 1 << shift;
+
+	am33xx_prm_rmw_reg_bits(mask, mask, inst, rstctrl_offs);
+
+	return 0;
+}
+
+/**
+ * am33xx_prm_deassert_hardreset - deassert a submodule hardreset line and
+ * wait
+ * @shift: register bit shift corresponding to the reset line to deassert
+ * @inst: CM instance register offset (*_INST macro)
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @rstst_reg: RM_RSTST register address for this module
+ *
+ * Some IPs like dsp, ipu or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP.  These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block.  This function will
+ * take the submodule out of reset and wait until the PRCM indicates
+ * that the reset has completed before returning.  Returns 0 upon success or
+ * -EINVAL upon an argument error, -EEXIST if the submodule was already out
+ * of reset, or -EBUSY if the submodule did not exit reset promptly.
+ */
+int am33xx_prm_deassert_hardreset(u8 shift, s16 inst,
+		u16 rstctrl_offs, u16 rstst_offs)
+{
+	int c;
+	u32 mask = 1 << shift;
+
+	/* Check the current status to avoid  de-asserting the line twice */
+	if (am33xx_prm_is_hardreset_asserted(shift, inst, rstctrl_offs) == 0)
+		return -EEXIST;
+
+	/* Clear the reset status by writing 1 to the status bit */
+	am33xx_prm_rmw_reg_bits(0xffffffff, mask, inst, rstst_offs);
+	/* de-assert the reset control line */
+	am33xx_prm_rmw_reg_bits(mask, 0, inst, rstctrl_offs);
+	/* wait the status to be set */
+
+	omap_test_timeout(am33xx_prm_is_hardreset_asserted(shift, inst,
+							   rstst_offs),
+			  MAX_MODULE_HARDRESET_WAIT, c);
+
+	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
+}

arch/arm/mach-omap2/prm33xx.h

+/*
+ * AM33XX PRM instance offset macros
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM33XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM33XX_H
+
+#include "prcm-common.h"
+#include "prm.h"
+
+#define AM33XX_PRM_BASE               0x44E00000
+
+#define AM33XX_PRM_REGADDR(inst, reg)                         \
+	AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRM_BASE + (inst) + (reg))
+
+
+/* PRM instances */
+#define AM33XX_PRM_OCP_SOCKET_MOD	0x0B00
+#define AM33XX_PRM_PER_MOD		0x0C00
+#define AM33XX_PRM_WKUP_MOD		0x0D00
+#define AM33XX_PRM_MPU_MOD		0x0E00
+#define AM33XX_PRM_DEVICE_MOD		0x0F00
+#define AM33XX_PRM_RTC_MOD		0x1000
+#define AM33XX_PRM_GFX_MOD		0x1100
+#define AM33XX_PRM_CEFUSE_MOD		0x1200
+
+/* PRM */
+
+/* PRM.OCP_SOCKET_PRM register offsets */
+#define AM33XX_REVISION_PRM_OFFSET		0x0000
+#define AM33XX_REVISION_PRM			AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0000)
+#define AM33XX_PRM_IRQSTATUS_MPU_OFFSET		0x0004
+#define AM33XX_PRM_IRQSTATUS_MPU		AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0004)
+#define AM33XX_PRM_IRQENABLE_MPU_OFFSET		0x0008
+#define AM33XX_PRM_IRQENABLE_MPU		AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0008)
+#define AM33XX_PRM_IRQSTATUS_M3_OFFSET		0x000c
+#define AM33XX_PRM_IRQSTATUS_M3			AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x000c)
+#define AM33XX_PRM_IRQENABLE_M3_OFFSET		0x0010
+#define AM33XX_PRM_IRQENABLE_M3			AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0010)
+
+/* PRM.PER_PRM register offsets */
+#define AM33XX_RM_PER_RSTCTRL_OFFSET		0x0000
+#define AM33XX_RM_PER_RSTCTRL			AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0000)
+#define AM33XX_RM_PER_RSTST_OFFSET		0x0004
+#define AM33XX_RM_PER_RSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0004)
+#define AM33XX_PM_PER_PWRSTST_OFFSET		0x0008
+#define AM33XX_PM_PER_PWRSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0008)
+#define AM33XX_PM_PER_PWRSTCTRL_OFFSET		0x000c
+#define AM33XX_PM_PER_PWRSTCTRL			AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x000c)
+
+/* PRM.WKUP_PRM register offsets */
+#define AM33XX_RM_WKUP_RSTCTRL_OFFSET		0x0000
+#define AM33XX_RM_WKUP_RSTCTRL			AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0000)
+#define AM33XX_PM_WKUP_PWRSTCTRL_OFFSET		0x0004
+#define AM33XX_PM_WKUP_PWRSTCTRL		AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0004)
+#define AM33XX_PM_WKUP_PWRSTST_OFFSET		0x0008
+#define AM33XX_PM_WKUP_PWRSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0008)
+#define AM33XX_RM_WKUP_RSTST_OFFSET		0x000c
+#define AM33XX_RM_WKUP_RSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x000c)
+
+/* PRM.MPU_PRM register offsets */
+#define AM33XX_PM_MPU_PWRSTCTRL_OFFSET		0x0000
+#define AM33XX_PM_MPU_PWRSTCTRL			AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0000)
+#define AM33XX_PM_MPU_PWRSTST_OFFSET		0x0004
+#define AM33XX_PM_MPU_PWRSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0004)
+#define AM33XX_RM_MPU_RSTST_OFFSET		0x0008
+#define AM33XX_RM_MPU_RSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0008)
+
+/* PRM.DEVICE_PRM register offsets */
+#define AM33XX_PRM_RSTCTRL_OFFSET		0x0000
+#define AM33XX_PRM_RSTCTRL			AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0000)
+#define AM33XX_PRM_RSTTIME_OFFSET		0x0004
+#define AM33XX_PRM_RSTTIME			AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0004)
+#define AM33XX_PRM_RSTST_OFFSET			0x0008
+#define AM33XX_PRM_RSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0008)
+#define AM33XX_PRM_SRAM_COUNT_OFFSET		0x000c
+#define AM33XX_PRM_SRAM_COUNT			AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x000c)
+#define AM33XX_PRM_LDO_SRAM_CORE_SETUP_OFFSET	0x0010
+#define AM33XX_PRM_LDO_SRAM_CORE_SETUP		AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0010)
+#define AM33XX_PRM_LDO_SRAM_CORE_CTRL_OFFSET	0x0014
+#define AM33XX_PRM_LDO_SRAM_CORE_CTRL		AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0014)
+#define AM33XX_PRM_LDO_SRAM_MPU_SETUP_OFFSET	0x0018
+#define AM33XX_PRM_LDO_SRAM_MPU_SETUP		AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0018)
+#define AM33XX_PRM_LDO_SRAM_MPU_CTRL_OFFSET	0x001c
+#define AM33XX_PRM_LDO_SRAM_MPU_CTRL		AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x001c)
+
+/* PRM.RTC_PRM register offsets */
+#define AM33XX_PM_RTC_PWRSTCTRL_OFFSET		0x0000
+#define AM33XX_PM_RTC_PWRSTCTRL			AM33XX_PRM_REGADDR(AM33XX_PRM_RTC_MOD, 0x0000)
+#define AM33XX_PM_RTC_PWRSTST_OFFSET		0x0004
+#define AM33XX_PM_RTC_PWRSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_RTC_MOD, 0x0004)
+
+/* PRM.GFX_PRM register offsets */
+#define AM33XX_PM_GFX_PWRSTCTRL_OFFSET		0x0000
+#define AM33XX_PM_GFX_PWRSTCTRL			AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0000)
+#define AM33XX_RM_GFX_RSTCTRL_OFFSET		0x0004
+#define AM33XX_RM_GFX_RSTCTRL			AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0004)
+#define AM33XX_PM_GFX_PWRSTST_OFFSET		0x0010
+#define AM33XX_PM_GFX_PWRSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0010)
+#define AM33XX_RM_GFX_RSTST_OFFSET		0x0014
+#define AM33XX_RM_GFX_RSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0014)
+
+/* PRM.CEFUSE_PRM register offsets */
+#define AM33XX_PM_CEFUSE_PWRSTCTRL_OFFSET	0x0000
+#define AM33XX_PM_CEFUSE_PWRSTCTRL		AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0000)
+#define AM33XX_PM_CEFUSE_PWRSTST_OFFSET		0x0004
+#define AM33XX_PM_CEFUSE_PWRSTST		AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0004)
+
+extern u32 am33xx_prm_read_reg(s16 inst, u16 idx);
+extern void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx);
+extern u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
+extern void am33xx_prm_global_warm_sw_reset(void);
+extern int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst,
+		u16 rstctrl_offs);
+extern int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs);
+extern int am33xx_prm_deassert_hardreset(u8 shift, s16 inst,
+		u16 rstctrl_offs, u16 rstst_offs);
+#endif

arch/arm/mach-omap2/prm_common.c

@@ -319,3 +319,65 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 	omap_prcm_irq_cleanup();
 	return -ENOMEM;
 }
+
+/*
+ * Stubbed functions so that common files continue to build when
+ * custom builds are used
+ * XXX These are temporary and should be removed at the earliest possible
+ * opportunity
+ */
+u32 __weak omap2_prm_read_mod_reg(s16 module, u16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+void __weak omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+}
+
+u32 __weak omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
+		s16 module, s16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+u32 __weak omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+u32 __weak omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+u32 __weak omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+int __weak omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+int __weak omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+int __weak omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
+						u8 st_shift)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+

arch/arm/mach-omap2/timer.c

@@ -69,11 +69,6 @@
 #define OMAP3_SECURE_TIMER	1
 #endif
 
-/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
-#define MAX_GPTIMER_ID		12
-
-static u32 sys_timer_reserved;
-
 /* Clockevent code */
 
 static struct omap_dm_timer clkev;
@@ -173,14 +168,14 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 		return -ENXIO;
 
 	/* After the dmtimer is using hwmod these clocks won't be needed */
-	sprintf(name, "gpt%d_fck", gptimer_id);
-	timer->fclk = clk_get(NULL, name);
+	timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh));
 	if (IS_ERR(timer->fclk))
 		return -ENODEV;
 
 	omap_hwmod_enable(oh);
 
-	sys_timer_reserved |= (1 << (gptimer_id - 1));
+	if (omap_dm_timer_reserve_systimer(gptimer_id))
+		return -ENODEV;
 
 	if (gptimer_id != 12) {
 		struct clk *src;
@@ -368,6 +363,11 @@ OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE,
 OMAP_SYS_TIMER(3_secure)
 #endif
 
+#ifdef CONFIG_SOC_AM33XX
+OMAP_SYS_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, 2, OMAP4_MPU_SOURCE)
+OMAP_SYS_TIMER(3_am33xx)
+#endif
+
 #ifdef CONFIG_ARCH_OMAP4
 #ifdef CONFIG_LOCAL_TIMERS
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
@@ -393,66 +393,6 @@ static void __init omap4_timer_init(void)
 OMAP_SYS_TIMER(4)
 #endif
 
-/**
- * omap2_dm_timer_set_src - change the timer input clock source
- * @pdev:	timer platform device pointer
- * @source:	array index of parent clock source
- */
-static int omap2_dm_timer_set_src(struct platform_device *pdev, int source)
-{
-	int ret;
-	struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
-	struct clk *fclk, *parent;
-	char *parent_name = NULL;
-
-	fclk = clk_get(&pdev->dev, "fck");
-	if (IS_ERR_OR_NULL(fclk)) {
-		dev_err(&pdev->dev, "%s: %d: clk_get() FAILED\n",
-				__func__, __LINE__);
-		return -EINVAL;
-	}
-
-	switch (source) {
-	case OMAP_TIMER_SRC_SYS_CLK:
-		parent_name = "sys_ck";
-		break;
-
-	case OMAP_TIMER_SRC_32_KHZ:
-		parent_name = "32k_ck";
-		break;
-
-	case OMAP_TIMER_SRC_EXT_CLK:
-		if (pdata->timer_ip_version == OMAP_TIMER_IP_VERSION_1) {
-			parent_name = "alt_ck";
-			break;
-		}
-		dev_err(&pdev->dev, "%s: %d: invalid clk src.\n",
-			__func__, __LINE__);
-		clk_put(fclk);
-		return -EINVAL;
-	}
-
-	parent = clk_get(&pdev->dev, parent_name);
-	if (IS_ERR_OR_NULL(parent)) {
-		dev_err(&pdev->dev, "%s: %d: clk_get() %s FAILED\n",
-			__func__, __LINE__, parent_name);
-		clk_put(fclk);
-		return -EINVAL;
-	}
-
-	ret = clk_set_parent(fclk, parent);
-	if (IS_ERR_VALUE(ret)) {
-		dev_err(&pdev->dev, "%s: clk_set_parent() to %s FAILED\n",
-			__func__, parent_name);
-		ret = -EINVAL;
-	}
-
-	clk_put(parent);
-	clk_put(fclk);
-
-	return ret;
-}
-
 /**
  * omap_timer_init - build and register timer device with an
  * associated timer hwmod
@@ -473,7 +413,6 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
 	struct dmtimer_platform_data *pdata;
 	struct platform_device *pdev;
 	struct omap_timer_capability_dev_attr *timer_dev_attr;
-	struct powerdomain *pwrdm;
 
 	pr_debug("%s: %s\n", __func__, oh->name);
 
@@ -501,18 +440,9 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
 	 */
 	sscanf(oh->name, "timer%2d", &id);
 
-	pdata->set_timer_src = omap2_dm_timer_set_src;
-	pdata->timer_ip_version = oh->class->rev;
+	if (timer_dev_attr)
+		pdata->timer_capability = timer_dev_attr->timer_capability;
 
-	/* Mark clocksource and clockevent timers as reserved */
-	if ((sys_timer_reserved >> (id - 1)) & 0x1)
-		pdata->reserved = 1;
-
-	pwrdm = omap_hwmod_get_pwrdm(oh);
-	pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm);
-#ifdef CONFIG_PM
-	pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
-#endif
 	pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
 				 NULL, 0, 0);
 

arch/arm/mach-omap2/usb-fs.c

-/*
- * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <asm/irq.h>
-
-#include <plat/usb.h>
-#include <plat/board.h>
-
-#include "control.h"
-#include "mux.h"
-
-#define INT_USB_IRQ_GEN		INT_24XX_USB_IRQ_GEN
-#define INT_USB_IRQ_NISO	INT_24XX_USB_IRQ_NISO
-#define INT_USB_IRQ_ISO		INT_24XX_USB_IRQ_ISO
-#define INT_USB_IRQ_HGEN	INT_24XX_USB_IRQ_HGEN
-#define INT_USB_IRQ_OTG		INT_24XX_USB_IRQ_OTG
-
-#if defined(CONFIG_ARCH_OMAP2)
-
-#ifdef	CONFIG_USB_GADGET_OMAP
-
-static struct resource udc_resources[] = {
-	/* order is significant! */
-	{		/* registers */
-		.start		= UDC_BASE,
-		.end		= UDC_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	}, {		/* general IRQ */
-		.start		= INT_USB_IRQ_GEN,
-		.flags		= IORESOURCE_IRQ,
-	}, {		/* PIO IRQ */
-		.start		= INT_USB_IRQ_NISO,
-		.flags		= IORESOURCE_IRQ,
-	}, {		/* SOF IRQ */
-		.start		= INT_USB_IRQ_ISO,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static u64 udc_dmamask = ~(u32)0;
-
-static struct platform_device udc_device = {
-	.name		= "omap_udc",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &udc_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(udc_resources),
-	.resource	= udc_resources,
-};
-
-static inline void udc_device_init(struct omap_usb_config *pdata)
-{
-	pdata->udc_device = &udc_device;
-}
-
-#else
-
-static inline void udc_device_init(struct omap_usb_config *pdata)
-{
-}
-
-#endif
-
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32)0;
-
-static struct resource ohci_resources[] = {
-	{
-		.start	= OMAP_OHCI_BASE,
-		.end	= OMAP_OHCI_BASE + 0xff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_IRQ_HGEN,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ohci_device = {
-	.name			= "ohci",
-	.id			= -1,
-	.dev = {
-		.dma_mask		= &ohci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(ohci_resources),
-	.resource		= ohci_resources,
-};
-
-static inline void ohci_device_init(struct omap_usb_config *pdata)
-{
-	pdata->ohci_device = &ohci_device;
-}
-
-#else
-
-static inline void ohci_device_init(struct omap_usb_config *pdata)
-{
-}
-
-#endif
-
-#if	defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
-
-static struct resource otg_resources[] = {
-	/* order is significant! */
-	{
-		.start		= OTG_BASE,
-		.end		= OTG_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= INT_USB_IRQ_OTG,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device otg_device = {
-	.name		= "omap_otg",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(otg_resources),
-	.resource	= otg_resources,
-};
-
-static inline void otg_device_init(struct omap_usb_config *pdata)
-{
-	pdata->otg_device = &otg_device;
-}
-
-#else
-
-static inline void otg_device_init(struct omap_usb_config *pdata)
-{
-}
-
-#endif
-
-static void omap2_usb_devconf_clear(u8 port, u32 mask)
-{
-	u32 r;
-
-	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	r &= ~USBTXWRMODEI(port, mask);
-	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
-}
-
-static void omap2_usb_devconf_set(u8 port, u32 mask)
-{
-	u32 r;
-
-	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	r |= USBTXWRMODEI(port, mask);
-	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
-}
-
-static void omap2_usb2_disable_5pinbitll(void)
-{
-	u32 r;
-
-	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	r &= ~(USBTXWRMODEI(2, USB_BIDIR_TLL) | USBT2TLL5PI);
-	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
-}
-
-static void omap2_usb2_enable_5pinunitll(void)
-{
-	u32 r;
-
-	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	r |= USBTXWRMODEI(2, USB_UNIDIR_TLL) | USBT2TLL5PI;
-	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
-}
-
-static u32 __init omap2_usb0_init(unsigned nwires, unsigned is_device)
-{
-	u32	syscon1 = 0;
-
-	omap2_usb_devconf_clear(0, USB_BIDIR_TLL);
-
-	if (nwires == 0)
-		return 0;
-
-	if (is_device)
-		omap_mux_init_signal("usb0_puen", 0);
-
-	omap_mux_init_signal("usb0_dat", 0);
-	omap_mux_init_signal("usb0_txen", 0);
-	omap_mux_init_signal("usb0_se0", 0);
-	if (nwires != 3)
-		omap_mux_init_signal("usb0_rcv", 0);
-
-	switch (nwires) {
-	case 3:
-		syscon1 = 2;
-		omap2_usb_devconf_set(0, USB_BIDIR);
-		break;
-	case 4:
-		syscon1 = 1;
-		omap2_usb_devconf_set(0, USB_BIDIR);
-		break;
-	case 6:
-		syscon1 = 3;
-		omap_mux_init_signal("usb0_vp", 0);
-		omap_mux_init_signal("usb0_vm", 0);
-		omap2_usb_devconf_set(0, USB_UNIDIR);
-		break;
-	default:
-		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
-			0, nwires);
-	}
-
-	return syscon1 << 16;
-}
-
-static u32 __init omap2_usb1_init(unsigned nwires)
-{
-	u32	syscon1 = 0;
-
-	omap2_usb_devconf_clear(1, USB_BIDIR_TLL);
-
-	if (nwires == 0)
-		return 0;
-
-	/* NOTE:  board-specific code must set up pin muxing for usb1,
-	 * since each signal could come out on either of two balls.
-	 */
-
-	switch (nwires) {
-	case 2:
-		/* NOTE: board-specific code must override this setting if
-		 * this TLL link is not using DP/DM
-		 */
-		syscon1 = 1;
-		omap2_usb_devconf_set(1, USB_BIDIR_TLL);
-		break;
-	case 3:
-		syscon1 = 2;
-		omap2_usb_devconf_set(1, USB_BIDIR);
-		break;
-	case 4:
-		syscon1 = 1;
-		omap2_usb_devconf_set(1, USB_BIDIR);
-		break;
-	case 6:
-	default:
-		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
-			1, nwires);
-	}
-
-	return syscon1 << 20;
-}
-
-static u32 __init omap2_usb2_init(unsigned nwires, unsigned alt_pingroup)
-{
-	u32	syscon1 = 0;
-
-	omap2_usb2_disable_5pinbitll();
-	alt_pingroup = 0;
-
-	/* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
-	if (alt_pingroup || nwires == 0)
-		return 0;
-
-	omap_mux_init_signal("usb2_dat", 0);
-	omap_mux_init_signal("usb2_se0", 0);
-	if (nwires > 2)
-		omap_mux_init_signal("usb2_txen", 0);
-	if (nwires > 3)
-		omap_mux_init_signal("usb2_rcv", 0);
-
-	switch (nwires) {
-	case 2:
-		/* NOTE: board-specific code must override this setting if
-		 * this TLL link is not using DP/DM
-		 */
-		syscon1 = 1;
-		omap2_usb_devconf_set(2, USB_BIDIR_TLL);
-		break;
-	case 3:
-		syscon1 = 2;
-		omap2_usb_devconf_set(2, USB_BIDIR);
-		break;
-	case 4:
-		syscon1 = 1;
-		omap2_usb_devconf_set(2, USB_BIDIR);
-		break;
-	case 5:
-		/* NOTE: board-specific code must mux this setting depending
-		 * on TLL link using DP/DM.  Something must also
-		 * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED}
-		 * 2420: hdq_sio.usb2_tllse0 or vlynq_rx0.usb2_tllse0
-		 * 2430: hdq_sio.usb2_tllse0 or sdmmc2_dat0.usb2_tllse0
-		 */
-
-		syscon1 = 3;
-		omap2_usb2_enable_5pinunitll();
-		break;
-	case 6:
-	default:
-		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
-			2, nwires);
-	}
-
-	return syscon1 << 24;
-}
-
-void __init omap2_usbfs_init(struct omap_usb_config *pdata)
-{
-	struct clk *ick;
-
-	if (!cpu_is_omap24xx())
-		return;
-
-	ick = clk_get(NULL, "usb_l4_ick");
-	if (IS_ERR(ick))
-		return;
-
-	clk_enable(ick);
-	pdata->usb0_init = omap2_usb0_init;
-	pdata->usb1_init = omap2_usb1_init;
-	pdata->usb2_init = omap2_usb2_init;
-	udc_device_init(pdata);
-	ohci_device_init(pdata);
-	otg_device_init(pdata);
-	omap_otg_init(pdata);
-	clk_disable(ick);
-	clk_put(ick);
-}
-
-#endif

arch/arm/mach-omap2/voltage.h

@@ -156,6 +156,7 @@ int omap_voltage_late_init(void);
 
 extern void omap2xxx_voltagedomains_init(void);
 extern void omap3xxx_voltagedomains_init(void);
+extern void am33xx_voltagedomains_init(void);
 extern void omap44xx_voltagedomains_init(void);
 
 struct voltagedomain *voltdm_lookup(const char *name);

arch/arm/mach-omap2/voltagedomains33xx_data.c

+/*
+ * AM33XX voltage domain data
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "voltage.h"
+
+static struct voltagedomain am33xx_voltdm_mpu = {
+	.name		= "mpu",
+};
+
+static struct voltagedomain am33xx_voltdm_core = {
+	.name		= "core",
+};
+
+static struct voltagedomain am33xx_voltdm_rtc = {
+	.name		= "rtc",
+};
+
+static struct voltagedomain *voltagedomains_am33xx[] __initdata = {
+	&am33xx_voltdm_mpu,
+	&am33xx_voltdm_core,
+	&am33xx_voltdm_rtc,
+	NULL,
+};
+
+void __init am33xx_voltagedomains_init(void)
+{
+	voltdm_init(voltagedomains_am33xx);
+}

arch/arm/plat-omap/Makefile

@@ -4,15 +4,13 @@
 
 # Common support
 obj-y := common.o sram.o clock.o devices.o dma.o mux.o \
-	 usb.o fb.o counter_32k.o
+	 fb.o counter_32k.o
 obj-m :=
 obj-n :=
 obj-  :=
 
 # omap_device support (OMAP2+ only at the moment)
-obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
-obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
-obj-$(CONFIG_ARCH_OMAP4) += omap_device.o
+obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o
 
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
 obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o

arch/arm/plat-omap/dma.c

@@ -573,22 +573,25 @@ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
 
 static inline void omap_enable_channel_irq(int lch)
 {
-	u32 status;
-
 	/* Clear CSR */
 	if (cpu_class_is_omap1())
-		status = p->dma_read(CSR, lch);
-	else if (cpu_class_is_omap2())
+		p->dma_read(CSR, lch);
+	else
 		p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
 
 	/* Enable some nice interrupts. */
 	p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch);
 }
 
-static void omap_disable_channel_irq(int lch)
+static inline void omap_disable_channel_irq(int lch)
 {
-	if (cpu_class_is_omap2())
-		p->dma_write(0, CICR, lch);
+	/* disable channel interrupts */
+	p->dma_write(0, CICR, lch);
+	/* Clear CSR */
+	if (cpu_class_is_omap1())
+		p->dma_read(CSR, lch);
+	else
+		p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
 }
 
 void omap_enable_dma_irq(int lch, u16 bits)
@@ -632,14 +635,14 @@ static inline void disable_lnk(int lch)
 	l = p->dma_read(CLNK_CTRL, lch);
 
 	/* Disable interrupts */
+	omap_disable_channel_irq(lch);
+
 	if (cpu_class_is_omap1()) {
-		p->dma_write(0, CICR, lch);
 		/* Set the STOP_LNK bit */
 		l |= 1 << 14;
 	}
 
 	if (cpu_class_is_omap2()) {
-		omap_disable_channel_irq(lch);
 		/* Clear the ENABLE_LNK bit */
 		l &= ~(1 << 15);
 	}
@@ -657,6 +660,9 @@ static inline void omap2_enable_irq_lch(int lch)
 		return;
 
 	spin_lock_irqsave(&dma_chan_lock, flags);
+	/* clear IRQ STATUS */
+	p->dma_write(1 << lch, IRQSTATUS_L0, lch);
+	/* Enable interrupt */
 	val = p->dma_read(IRQENABLE_L0, lch);
 	val |= 1 << lch;
 	p->dma_write(val, IRQENABLE_L0, lch);
@@ -672,9 +678,12 @@ static inline void omap2_disable_irq_lch(int lch)
 		return;
 
 	spin_lock_irqsave(&dma_chan_lock, flags);
+	/* Disable interrupt */
 	val = p->dma_read(IRQENABLE_L0, lch);
 	val &= ~(1 << lch);
 	p->dma_write(val, IRQENABLE_L0, lch);
+	/* clear IRQ STATUS */
+	p->dma_write(1 << lch, IRQSTATUS_L0, lch);
 	spin_unlock_irqrestore(&dma_chan_lock, flags);
 }
 
@@ -745,11 +754,8 @@ int omap_request_dma(int dev_id, const char *dev_name,
 	}
 
 	if (cpu_class_is_omap2()) {
-		omap2_enable_irq_lch(free_ch);
 		omap_enable_channel_irq(free_ch);
-		/* Clear the CSR register and IRQ status register */
-		p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, free_ch);
-		p->dma_write(1 << free_ch, IRQSTATUS_L0, 0);
+		omap2_enable_irq_lch(free_ch);
 	}
 
 	*dma_ch_out = free_ch;
@@ -768,27 +774,19 @@ void omap_free_dma(int lch)
 		return;
 	}
 
-	if (cpu_class_is_omap1()) {
-		/* Disable all DMA interrupts for the channel. */
-		p->dma_write(0, CICR, lch);
-		/* Make sure the DMA transfer is stopped. */
-		p->dma_write(0, CCR, lch);
-	}
-
-	if (cpu_class_is_omap2()) {
+	/* Disable interrupt for logical channel */
+	if (cpu_class_is_omap2())
 		omap2_disable_irq_lch(lch);
 
-		/* Clear the CSR register and IRQ status register */
-		p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
-		p->dma_write(1 << lch, IRQSTATUS_L0, lch);
+	/* Disable all DMA interrupts for the channel. */
+	omap_disable_channel_irq(lch);
 
-		/* Disable all DMA interrupts for the channel. */
-		p->dma_write(0, CICR, lch);
+	/* Make sure the DMA transfer is stopped. */
+	p->dma_write(0, CCR, lch);
 
-		/* Make sure the DMA transfer is stopped. */
-		p->dma_write(0, CCR, lch);
+	/* Clear registers */
+	if (cpu_class_is_omap2())
 		omap_clear_dma(lch);
-	}
 
 	spin_lock_irqsave(&dma_chan_lock, flags);
 	dma_chan[lch].dev_id = -1;
@@ -943,8 +941,7 @@ void omap_stop_dma(int lch)
 	u32 l;
 
 	/* Disable all interrupts on the channel */
-	if (cpu_class_is_omap1())
-		p->dma_write(0, CICR, lch);
+	omap_disable_channel_irq(lch);
 
 	l = p->dma_read(CCR, lch);
 	if (IS_DMA_ERRATA(DMA_ERRATA_i541) &&

arch/arm/plat-omap/dmtimer.c

@@ -37,14 +37,16 @@
 
 #include <linux/module.h>
 #include <linux/io.h>
-#include <linux/slab.h>
+#include <linux/device.h>
 #include <linux/err.h>
 #include <linux/pm_runtime.h>
 
 #include <plat/dmtimer.h>
+#include <plat/omap-pm.h>
 
 #include <mach/hardware.h>
 
+static u32 omap_reserved_systimers;
 static LIST_HEAD(omap_timer_list);
 static DEFINE_SPINLOCK(dm_timer_lock);
 
@@ -133,17 +135,22 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer)
 
 int omap_dm_timer_prepare(struct omap_dm_timer *timer)
 {
-	struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
 	int ret;
 
-	timer->fclk = clk_get(&timer->pdev->dev, "fck");
-	if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) {
-		timer->fclk = NULL;
-		dev_err(&timer->pdev->dev, ": No fclk handle.\n");
-		return -EINVAL;
+	/*
+	 * FIXME: OMAP1 devices do not use the clock framework for dmtimers so
+	 * do not call clk_get() for these devices.
+	 */
+	if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) {
+		timer->fclk = clk_get(&timer->pdev->dev, "fck");
+		if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) {
+			timer->fclk = NULL;
+			dev_err(&timer->pdev->dev, ": No fclk handle.\n");
+			return -EINVAL;
+		}
 	}
 
-	if (pdata->needs_manual_reset)
+	if (timer->capability & OMAP_TIMER_NEEDS_RESET)
 		omap_dm_timer_reset(timer);
 
 	ret = omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
@@ -152,6 +159,21 @@ int omap_dm_timer_prepare(struct omap_dm_timer *timer)
 	return ret;
 }
 
+static inline u32 omap_dm_timer_reserved_systimer(int id)
+{
+	return (omap_reserved_systimers & (1 << (id - 1))) ? 1 : 0;
+}
+
+int omap_dm_timer_reserve_systimer(int id)
+{
+	if (omap_dm_timer_reserved_systimer(id))
+		return -ENODEV;
+
+	omap_reserved_systimers |= (1 << (id - 1));
+
+	return 0;
+}
+
 struct omap_dm_timer *omap_dm_timer_request(void)
 {
 	struct omap_dm_timer *timer = NULL, *t;
@@ -325,10 +347,9 @@ int omap_dm_timer_start(struct omap_dm_timer *timer)
 
 	omap_dm_timer_enable(timer);
 
-	if (timer->loses_context) {
-		u32 ctx_loss_cnt_after =
-			timer->get_context_loss_count(&timer->pdev->dev);
-		if (ctx_loss_cnt_after != timer->ctx_loss_count)
+	if (!(timer->capability & OMAP_TIMER_ALWON)) {
+		if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) !=
+				timer->ctx_loss_count)
 			omap_timer_restore_context(timer);
 	}
 
@@ -347,20 +368,18 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_start);
 int omap_dm_timer_stop(struct omap_dm_timer *timer)
 {
 	unsigned long rate = 0;
-	struct dmtimer_platform_data *pdata;
 
 	if (unlikely(!timer))
 		return -EINVAL;
 
-	pdata = timer->pdev->dev.platform_data;
-	if (!pdata->needs_manual_reset)
+	if (!(timer->capability & OMAP_TIMER_NEEDS_RESET))
 		rate = clk_get_rate(timer->fclk);
 
 	__omap_dm_timer_stop(timer, timer->posted, rate);
 
-	if (timer->loses_context && timer->get_context_loss_count)
+	if (!(timer->capability & OMAP_TIMER_ALWON))
 		timer->ctx_loss_count =
-			timer->get_context_loss_count(&timer->pdev->dev);
+			omap_pm_get_dev_context_loss_count(&timer->pdev->dev);
 
 	/*
 	 * Since the register values are computed and written within
@@ -378,6 +397,8 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
 int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 {
 	int ret;
+	char *parent_name = NULL;
+	struct clk *fclk, *parent;
 	struct dmtimer_platform_data *pdata;
 
 	if (unlikely(!timer))
@@ -388,7 +409,49 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 	if (source < 0 || source >= 3)
 		return -EINVAL;
 
-	ret = pdata->set_timer_src(timer->pdev, source);
+	/*
+	 * FIXME: Used for OMAP1 devices only because they do not currently
+	 * use the clock framework to set the parent clock. To be removed
+	 * once OMAP1 migrated to using clock framework for dmtimers
+	 */
+	if (pdata->set_timer_src)
+		return pdata->set_timer_src(timer->pdev, source);
+
+	fclk = clk_get(&timer->pdev->dev, "fck");
+	if (IS_ERR_OR_NULL(fclk)) {
+		pr_err("%s: fck not found\n", __func__);
+		return -EINVAL;
+	}
+
+	switch (source) {
+	case OMAP_TIMER_SRC_SYS_CLK:
+		parent_name = "timer_sys_ck";
+		break;
+
+	case OMAP_TIMER_SRC_32_KHZ:
+		parent_name = "timer_32k_ck";
+		break;
+
+	case OMAP_TIMER_SRC_EXT_CLK:
+		parent_name = "timer_ext_ck";
+		break;
+	}
+
+	parent = clk_get(&timer->pdev->dev, parent_name);
+	if (IS_ERR_OR_NULL(parent)) {
+		pr_err("%s: %s not found\n", __func__, parent_name);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = clk_set_parent(fclk, parent);
+	if (IS_ERR_VALUE(ret))
+		pr_err("%s: failed to set %s as parent\n", __func__,
+			parent_name);
+
+	clk_put(parent);
+out:
+	clk_put(fclk);
 
 	return ret;
 }
@@ -431,10 +494,9 @@ int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
 
 	omap_dm_timer_enable(timer);
 
-	if (timer->loses_context) {
-		u32 ctx_loss_cnt_after =
-			timer->get_context_loss_count(&timer->pdev->dev);
-		if (ctx_loss_cnt_after != timer->ctx_loss_count)
+	if (!(timer->capability & OMAP_TIMER_ALWON)) {
+		if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) !=
+				timer->ctx_loss_count)
 			omap_timer_restore_context(timer);
 	}
 
@@ -627,68 +689,57 @@ EXPORT_SYMBOL_GPL(omap_dm_timers_active);
  */
 static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
 {
-	int ret;
 	unsigned long flags;
 	struct omap_dm_timer *timer;
-	struct resource *mem, *irq, *ioarea;
+	struct resource *mem, *irq;
+	struct device *dev = &pdev->dev;
 	struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
 
 	if (!pdata) {
-		dev_err(&pdev->dev, "%s: no platform data.\n", __func__);
+		dev_err(dev, "%s: no platform data.\n", __func__);
 		return -ENODEV;
 	}
 
 	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (unlikely(!irq)) {
-		dev_err(&pdev->dev, "%s: no IRQ resource.\n", __func__);
+		dev_err(dev, "%s: no IRQ resource.\n", __func__);
 		return -ENODEV;
 	}
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (unlikely(!mem)) {
-		dev_err(&pdev->dev, "%s: no memory resource.\n", __func__);
+		dev_err(dev, "%s: no memory resource.\n", __func__);
 		return -ENODEV;
 	}
 
-	ioarea = request_mem_region(mem->start, resource_size(mem),
-			pdev->name);
-	if (!ioarea) {
-		dev_err(&pdev->dev, "%s: region already claimed.\n", __func__);
-		return -EBUSY;
-	}
-
-	timer = kzalloc(sizeof(struct omap_dm_timer), GFP_KERNEL);
+	timer = devm_kzalloc(dev, sizeof(struct omap_dm_timer), GFP_KERNEL);
 	if (!timer) {
-		dev_err(&pdev->dev, "%s: no memory for omap_dm_timer.\n",
-			__func__);
-		ret = -ENOMEM;
-		goto err_free_ioregion;
+		dev_err(dev, "%s: memory alloc failed!\n", __func__);
+		return  -ENOMEM;
 	}
 
-	timer->io_base = ioremap(mem->start, resource_size(mem));
+	timer->io_base = devm_request_and_ioremap(dev, mem);
 	if (!timer->io_base) {
-		dev_err(&pdev->dev, "%s: ioremap failed.\n", __func__);
-		ret = -ENOMEM;
-		goto err_free_mem;
+		dev_err(dev, "%s: region already claimed.\n", __func__);
+		return -ENOMEM;
 	}
 
 	timer->id = pdev->id;
 	timer->irq = irq->start;
-	timer->reserved = pdata->reserved;
+	timer->reserved = omap_dm_timer_reserved_systimer(timer->id);
 	timer->pdev = pdev;
-	timer->loses_context = pdata->loses_context;
-	timer->get_context_loss_count = pdata->get_context_loss_count;
+	timer->capability = pdata->timer_capability;
 
 	/* Skip pm_runtime_enable for OMAP1 */
-	if (!pdata->needs_manual_reset) {
-		pm_runtime_enable(&pdev->dev);
-		pm_runtime_irq_safe(&pdev->dev);
+	if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) {
+		pm_runtime_enable(dev);
+		pm_runtime_irq_safe(dev);
 	}
 
 	if (!timer->reserved) {
-		pm_runtime_get_sync(&pdev->dev);
+		pm_runtime_get_sync(dev);
 		__omap_dm_timer_init_regs(timer);
-		pm_runtime_put(&pdev->dev);
+		pm_runtime_put(dev);
 	}
 
 	/* add the timer element to the list */
@@ -696,17 +747,9 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
 	list_add_tail(&timer->node, &omap_timer_list);
 	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
-	dev_dbg(&pdev->dev, "Device Probed.\n");
+	dev_dbg(dev, "Device Probed.\n");
 
 	return 0;
-
-err_free_mem:
-	kfree(timer);
-
-err_free_ioregion:
-	release_mem_region(mem->start, resource_size(mem));
-
-	return ret;
 }
 
 /**
@@ -727,7 +770,6 @@ static int __devexit omap_dm_timer_remove(struct platform_device *pdev)
 	list_for_each_entry(timer, &omap_timer_list, node)
 		if (timer->pdev->id == pdev->id) {
 			list_del(&timer->node);
-			kfree(timer);
 			ret = 0;
 			break;
 		}

arch/arm/plat-omap/include/plat/board.h

@@ -57,44 +57,6 @@ struct omap_camera_sensor_config {
 	int (*power_off)(void * data);
 };
 
-struct omap_usb_config {
-	/* Configure drivers according to the connectors on your board:
-	 *  - "A" connector (rectagular)
-	 *	... for host/OHCI use, set "register_host".
-	 *  - "B" connector (squarish) or "Mini-B"
-	 *	... for device/gadget use, set "register_dev".
-	 *  - "Mini-AB" connector (very similar to Mini-B)
-	 *	... for OTG use as device OR host, initialize "otg"
-	 */
-	unsigned	register_host:1;
-	unsigned	register_dev:1;
-	u8		otg;	/* port number, 1-based:  usb1 == 2 */
-
-	u8		hmc_mode;
-
-	/* implicitly true if otg:  host supports remote wakeup? */
-	u8		rwc;
-
-	/* signaling pins used to talk to transceiver on usbN:
-	 *  0 == usbN unused
-	 *  2 == usb0-only, using internal transceiver
-	 *  3 == 3 wire bidirectional
-	 *  4 == 4 wire bidirectional
-	 *  6 == 6 wire unidirectional (or TLL)
-	 */
-	u8		pins[3];
-
-	struct platform_device *udc_device;
-	struct platform_device *ohci_device;
-	struct platform_device *otg_device;
-
-	u32 (*usb0_init)(unsigned nwires, unsigned is_device);
-	u32 (*usb1_init)(unsigned nwires);
-	u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
-
-	int (*ocpi_enable)(void);
-};
-
 struct omap_lcd_config {
 	char panel_name[16];
 	char ctrl_name[16];

arch/arm/plat-omap/include/plat/clock.h

@@ -156,7 +156,6 @@ struct dpll_data {
 	u8			min_divider;
 	u16			max_divider;
 	u8			modes;
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 	void __iomem		*autoidle_reg;
 	void __iomem		*idlest_reg;
 	u32			autoidle_mask;
@@ -167,7 +166,6 @@ struct dpll_data {
 	u8			auto_recal_bit;
 	u8			recal_en_bit;
 	u8			recal_st_bit;
-#  endif
 	u8			flags;
 };
 

arch/arm/plat-omap/include/plat/cpu.h

@@ -150,8 +150,8 @@ IS_AM_SUBCLASS(335x, 0x335)
 #define cpu_is_ti816x()			0
 #define cpu_is_ti814x()			0
 #define soc_is_am35xx()			0
-#define cpu_is_am33xx()			0
-#define cpu_is_am335x()			0
+#define soc_is_am33xx()			0
+#define soc_is_am335x()			0
 #define cpu_is_omap44xx()		0
 #define cpu_is_omap443x()		0
 #define cpu_is_omap446x()		0
@@ -344,8 +344,6 @@ IS_OMAP_TYPE(3430, 0x3430)
 # undef cpu_is_ti816x
 # undef cpu_is_ti814x
 # undef soc_is_am35xx
-# undef cpu_is_am33xx
-# undef cpu_is_am335x
 # define cpu_is_omap3430()		is_omap3430()
 # undef cpu_is_omap3630
 # define cpu_is_omap3630()		is_omap363x()
@@ -353,8 +351,13 @@ IS_OMAP_TYPE(3430, 0x3430)
 # define cpu_is_ti816x()		is_ti816x()
 # define cpu_is_ti814x()		is_ti814x()
 # define soc_is_am35xx()		is_am35xx()
-# define cpu_is_am33xx()		is_am33xx()
-# define cpu_is_am335x()		is_am335x()
+#endif
+
+# if defined(CONFIG_SOC_AM33XX)
+# undef soc_is_am33xx
+# undef soc_is_am335x
+# define soc_is_am33xx()		is_am33xx()
+# define soc_is_am335x()		is_am335x()
 #endif
 
 # if defined(CONFIG_ARCH_OMAP4)
@@ -408,7 +411,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define AM35XX_REV_ES1_0	AM35XX_CLASS
 #define AM35XX_REV_ES1_1	(AM35XX_CLASS | (0x1 << 8))
 
-#define AM335X_CLASS		0x33500034
+#define AM335X_CLASS		0x33500033
 #define AM335X_REV_ES1_0	AM335X_CLASS
 
 #define OMAP443X_CLASS		0x44300044

arch/arm/plat-omap/include/plat/dmtimer.h

@@ -55,23 +55,17 @@
 #define OMAP_TIMER_TRIGGER_OVERFLOW		0x01
 #define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE	0x02
 
-/*
- * IP revision identifier so that Highlander IP
- * in OMAP4 can be distinguished.
- */
-#define OMAP_TIMER_IP_VERSION_1                        0x1
-
 /* timer capabilities used in hwmod database */
 #define OMAP_TIMER_SECURE				0x80000000
 #define OMAP_TIMER_ALWON				0x40000000
 #define OMAP_TIMER_HAS_PWM				0x20000000
+#define OMAP_TIMER_NEEDS_RESET				0x10000000
 
 struct omap_timer_capability_dev_attr {
 	u32 timer_capability;
 };
 
 struct omap_dm_timer;
-struct clk;
 
 struct timer_regs {
 	u32 tidr;
@@ -96,16 +90,12 @@ struct timer_regs {
 };
 
 struct dmtimer_platform_data {
+	/* set_timer_src - Only used for OMAP1 devices */
 	int (*set_timer_src)(struct platform_device *pdev, int source);
-	int timer_ip_version;
-	u32 needs_manual_reset:1;
-	bool reserved;
-
-	bool loses_context;
-
-	int (*get_context_loss_count)(struct device *dev);
+	u32 timer_capability;
 };
 
+int omap_dm_timer_reserve_systimer(int id);
 struct omap_dm_timer *omap_dm_timer_request(void);
 struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
 int omap_dm_timer_free(struct omap_dm_timer *timer);
@@ -272,13 +262,11 @@ struct omap_dm_timer {
 	unsigned reserved:1;
 	unsigned posted:1;
 	struct timer_regs context;
-	bool loses_context;
 	int ctx_loss_count;
 	int revision;
+	u32 capability;
 	struct platform_device *pdev;
 	struct list_head node;
-
-	int (*get_context_loss_count)(struct device *dev);
 };
 
 int omap_dm_timer_prepare(struct omap_dm_timer *timer);

arch/arm/plat-omap/include/plat/dsp.h

@@ -18,6 +18,9 @@ struct omap_dsp_platform_data {
 	u32 (*dsp_cm_read)(s16 , u16);
 	u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16);
 
+	void (*set_bootaddr)(u32);
+	void (*set_bootmode)(u8);
+
 	phys_addr_t phys_mempool_base;
 	phys_addr_t phys_mempool_size;
 };

arch/arm/plat-omap/include/plat/omap_hwmod.h

@@ -41,6 +41,7 @@ struct omap_device;
 
 extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1;
 extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
+extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3;
 
 /*
  * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant
@@ -69,6 +70,17 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
 #define SYSC_TYPE2_SIDLEMODE_MASK	(0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
 #define SYSC_TYPE2_MIDLEMODE_SHIFT	4
 #define SYSC_TYPE2_MIDLEMODE_MASK	(0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
+#define SYSC_TYPE2_DMADISABLE_SHIFT	16
+#define SYSC_TYPE2_DMADISABLE_MASK	(0x1 << SYSC_TYPE2_DMADISABLE_SHIFT)
+
+/*
+ * OCP SYSCONFIG bit shifts/masks TYPE3.
+ * This is applicable for some IPs present in AM33XX
+ */
+#define SYSC_TYPE3_SIDLEMODE_SHIFT	0
+#define SYSC_TYPE3_SIDLEMODE_MASK	(0x3 << SYSC_TYPE3_SIDLEMODE_SHIFT)
+#define SYSC_TYPE3_MIDLEMODE_SHIFT	2
+#define SYSC_TYPE3_MIDLEMODE_MASK	(0x3 << SYSC_TYPE3_MIDLEMODE_SHIFT)
 
 /* OCP SYSSTATUS bit shifts/masks */
 #define SYSS_RESETDONE_SHIFT		0
@@ -283,6 +295,7 @@ struct omap_hwmod_ocp_if {
 #define SYSS_HAS_RESET_STATUS	(1 << 7)
 #define SYSC_NO_CACHE		(1 << 8)  /* XXX SW flag, belongs elsewhere */
 #define SYSC_HAS_RESET_STATUS	(1 << 9)
+#define SYSC_HAS_DMADISABLE	(1 << 10)
 
 /* omap_hwmod_sysconfig.clockact flags */
 #define CLOCKACT_TEST_BOTH	0x0
@@ -298,6 +311,7 @@ struct omap_hwmod_ocp_if {
  * @enwkup_shift: Offset of the enawakeup bit
  * @srst_shift: Offset of the softreset bit
  * @autoidle_shift: Offset of the autoidle bit
+ * @dmadisable_shift: Offset of the dmadisable bit
  */
 struct omap_hwmod_sysc_fields {
 	u8 midle_shift;
@@ -306,6 +320,7 @@ struct omap_hwmod_sysc_fields {
 	u8 enwkup_shift;
 	u8 srst_shift;
 	u8 autoidle_shift;
+	u8 dmadisable_shift;
 };
 
 /**
@@ -374,11 +389,13 @@ struct omap_hwmod_omap2_prcm {
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
  * @clkctrl_reg: PRCM address of the clock control register
  * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
+ * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM
  * @submodule_wkdep_bit: bit shift of the WKDEP range
  */
 struct omap_hwmod_omap4_prcm {
 	u16		clkctrl_offs;
 	u16		rstctrl_offs;
+	u16		rstst_offs;
 	u16		context_offs;
 	u8		submodule_wkdep_bit;
 	u8		modulemode;
@@ -629,6 +646,10 @@ int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
 
 int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx);
 
+extern void __init omap_hwmod_init(void);
+
+const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
+
 /*
  * Chip variant-specific hwmod init routines - XXX should be converted
  * to use initcalls once the initial boot ordering is straightened out

arch/arm/plat-omap/include/plat/sdrc.h

@@ -123,7 +123,7 @@ struct omap_sdrc_params {
 	u32 mr;
 };
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#ifdef CONFIG_SOC_HAS_OMAP2_SDRC
 void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 			    struct omap_sdrc_params *sdrc_cs1);
 #else

arch/arm/plat-omap/include/plat/serial.h

@@ -60,6 +60,9 @@
 /* AM3505/3517 UART4 */
 #define AM35XX_UART4_BASE	0x4809E000	/* Only on AM3505/3517 */
 
+/* AM33XX serial port */
+#define AM33XX_UART1_BASE	0x44E09000
+
 /* External port on Zoom2/3 */
 #define ZOOM_UART_BASE		0x10000000
 #define ZOOM_UART_VIRT		0xfa400000
@@ -93,6 +96,7 @@
 #define TI81XXUART1		81
 #define TI81XXUART2		82
 #define TI81XXUART3		83
+#define AM33XXUART1		84
 #define ZOOM_UART		95		/* Only on zoom2/3 */
 
 /* This is only used by 8250.c for omap1510 */

arch/arm/plat-omap/include/plat/uncompress.h

@@ -103,6 +103,10 @@ static inline void flush(void)
 	_DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT,	\
 		TI81XXUART##p)
 
+#define DEBUG_LL_AM33XX(p, mach)					\
+	_DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		AM33XXUART##p)
+
 static inline void __arch_decomp_setup(unsigned long arch_id)
 {
 	int port = 0;
@@ -183,6 +187,8 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		/* TI8148 base boards using UART1 */
 		DEBUG_LL_TI81XX(1, ti8148evm);
 
+		/* AM33XX base boards using UART1 */
+		DEBUG_LL_AM33XX(1, am335xevm);
 	} while (0);
 }
 

arch/arm/plat-omap/include/plat/usb.h

@@ -44,6 +44,8 @@ struct usbhs_omap_board_data {
 	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
 };
 
+#ifdef CONFIG_ARCH_OMAP2PLUS
+
 struct ehci_hcd_omap_platform_data {
 	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
 	int				reset_gpio_port[OMAP3_HS_USB_PORTS];
@@ -64,26 +66,6 @@ struct usbhs_omap_platform_data {
 };
 /*-------------------------------------------------------------------------*/
 
-#define OMAP1_OTG_BASE			0xfffb0400
-#define OMAP1_UDC_BASE			0xfffb4000
-#define OMAP1_OHCI_BASE			0xfffba000
-
-#define OMAP2_OHCI_BASE			0x4805e000
-#define OMAP2_UDC_BASE			0x4805e200
-#define OMAP2_OTG_BASE			0x4805e300
-
-#ifdef CONFIG_ARCH_OMAP1
-
-#define OTG_BASE			OMAP1_OTG_BASE
-#define UDC_BASE			OMAP1_UDC_BASE
-#define OMAP_OHCI_BASE			OMAP1_OHCI_BASE
-
-#else
-
-#define OTG_BASE			OMAP2_OTG_BASE
-#define UDC_BASE			OMAP2_UDC_BASE
-#define OMAP_OHCI_BASE			OMAP2_OHCI_BASE
-
 struct omap_musb_board_data {
 	u8	interface_type;
 	u8	mode;
@@ -107,44 +89,6 @@ extern int omap4430_phy_init(struct device *dev);
 extern int omap4430_phy_exit(struct device *dev);
 extern int omap4430_phy_suspend(struct device *dev, int suspend);
 
-/*
- * NOTE: Please update omap USB drivers to use ioremap + read/write
- */
-
-#define OMAP2_L4_IO_OFFSET	0xb2000000
-#define OMAP2_L4_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_L4_IO_OFFSET)
-
-static inline u8 omap_readb(u32 pa)
-{
-	return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
-}
-
-static inline u16 omap_readw(u32 pa)
-{
-	return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
-}
-
-static inline u32 omap_readl(u32 pa)
-{
-	return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
-}
-
-static inline void omap_writeb(u8 v, u32 pa)
-{
-	__raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-
-
-static inline void omap_writew(u16 v, u32 pa)
-{
-	__raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-
-static inline void omap_writel(u32 v, u32 pa)
-{
-	__raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-
 #endif
 
 extern void am35x_musb_reset(void);
@@ -153,142 +97,6 @@ extern void am35x_musb_clear_irq(void);
 extern void am35x_set_mode(u8 musb_mode);
 extern void ti81xx_musb_phy_power(u8 on);
 
-/*
- * FIXME correct answer depends on hmc_mode,
- * as does (on omap1) any nonzero value for config->otg port number
- */
-#ifdef	CONFIG_USB_GADGET_OMAP
-#define	is_usb0_device(config)	1
-#else
-#define	is_usb0_device(config)	0
-#endif
-
-void omap_otg_init(struct omap_usb_config *config);
-
-#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
-void omap1_usb_init(struct omap_usb_config *pdata);
-#else
-static inline void omap1_usb_init(struct omap_usb_config *pdata)
-{
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE)
-void omap2_usbfs_init(struct omap_usb_config *pdata);
-#else
-static inline void omap2_usbfs_init(struct omap_usb_config *pdata)
-{
-}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * OTG and transceiver registers, for OMAPs starting with ARM926
- */
-#define OTG_REV				(OTG_BASE + 0x00)
-#define OTG_SYSCON_1			(OTG_BASE + 0x04)
-#	define	 USB2_TRX_MODE(w)	(((w)>>24)&0x07)
-#	define	 USB1_TRX_MODE(w)	(((w)>>20)&0x07)
-#	define	 USB0_TRX_MODE(w)	(((w)>>16)&0x07)
-#	define	 OTG_IDLE_EN		(1 << 15)
-#	define	 HST_IDLE_EN		(1 << 14)
-#	define	 DEV_IDLE_EN		(1 << 13)
-#	define	 OTG_RESET_DONE		(1 << 2)
-#	define	 OTG_SOFT_RESET		(1 << 1)
-#define OTG_SYSCON_2			(OTG_BASE + 0x08)
-#	define	 OTG_EN			(1 << 31)
-#	define	 USBX_SYNCHRO		(1 << 30)
-#	define	 OTG_MST16		(1 << 29)
-#	define	 SRP_GPDATA		(1 << 28)
-#	define	 SRP_GPDVBUS		(1 << 27)
-#	define	 SRP_GPUVBUS(w)		(((w)>>24)&0x07)
-#	define	 A_WAIT_VRISE(w)	(((w)>>20)&0x07)
-#	define	 B_ASE_BRST(w)		(((w)>>16)&0x07)
-#	define	 SRP_DPW		(1 << 14)
-#	define	 SRP_DATA		(1 << 13)
-#	define	 SRP_VBUS		(1 << 12)
-#	define	 OTG_PADEN		(1 << 10)
-#	define	 HMC_PADEN		(1 << 9)
-#	define	 UHOST_EN		(1 << 8)
-#	define	 HMC_TLLSPEED		(1 << 7)
-#	define	 HMC_TLLATTACH		(1 << 6)
-#	define	 OTG_HMC(w)		(((w)>>0)&0x3f)
-#define OTG_CTRL			(OTG_BASE + 0x0c)
-#	define	 OTG_USB2_EN		(1 << 29)
-#	define	 OTG_USB2_DP		(1 << 28)
-#	define	 OTG_USB2_DM		(1 << 27)
-#	define	 OTG_USB1_EN		(1 << 26)
-#	define	 OTG_USB1_DP		(1 << 25)
-#	define	 OTG_USB1_DM		(1 << 24)
-#	define	 OTG_USB0_EN		(1 << 23)
-#	define	 OTG_USB0_DP		(1 << 22)
-#	define	 OTG_USB0_DM		(1 << 21)
-#	define	 OTG_ASESSVLD		(1 << 20)
-#	define	 OTG_BSESSEND		(1 << 19)
-#	define	 OTG_BSESSVLD		(1 << 18)
-#	define	 OTG_VBUSVLD		(1 << 17)
-#	define	 OTG_ID			(1 << 16)
-#	define	 OTG_DRIVER_SEL		(1 << 15)
-#	define	 OTG_A_SETB_HNPEN	(1 << 12)
-#	define	 OTG_A_BUSREQ		(1 << 11)
-#	define	 OTG_B_HNPEN		(1 << 9)
-#	define	 OTG_B_BUSREQ		(1 << 8)
-#	define	 OTG_BUSDROP		(1 << 7)
-#	define	 OTG_PULLDOWN		(1 << 5)
-#	define	 OTG_PULLUP		(1 << 4)
-#	define	 OTG_DRV_VBUS		(1 << 3)
-#	define	 OTG_PD_VBUS		(1 << 2)
-#	define	 OTG_PU_VBUS		(1 << 1)
-#	define	 OTG_PU_ID		(1 << 0)
-#define OTG_IRQ_EN			(OTG_BASE + 0x10)	/* 16-bit */
-#	define	 DRIVER_SWITCH		(1 << 15)
-#	define	 A_VBUS_ERR		(1 << 13)
-#	define	 A_REQ_TMROUT		(1 << 12)
-#	define	 A_SRP_DETECT		(1 << 11)
-#	define	 B_HNP_FAIL		(1 << 10)
-#	define	 B_SRP_TMROUT		(1 << 9)
-#	define	 B_SRP_DONE		(1 << 8)
-#	define	 B_SRP_STARTED		(1 << 7)
-#	define	 OPRT_CHG		(1 << 0)
-#define OTG_IRQ_SRC			(OTG_BASE + 0x14)	/* 16-bit */
-	// same bits as in IRQ_EN
-#define OTG_OUTCTRL			(OTG_BASE + 0x18)	/* 16-bit */
-#	define	 OTGVPD			(1 << 14)
-#	define	 OTGVPU			(1 << 13)
-#	define	 OTGPUID		(1 << 12)
-#	define	 USB2VDR		(1 << 10)
-#	define	 USB2PDEN		(1 << 9)
-#	define	 USB2PUEN		(1 << 8)
-#	define	 USB1VDR		(1 << 6)
-#	define	 USB1PDEN		(1 << 5)
-#	define	 USB1PUEN		(1 << 4)
-#	define	 USB0VDR		(1 << 2)
-#	define	 USB0PDEN		(1 << 1)
-#	define	 USB0PUEN		(1 << 0)
-#define OTG_TEST			(OTG_BASE + 0x20)	/* 16-bit */
-#define OTG_VENDOR_CODE			(OTG_BASE + 0xfc)	/* 16-bit */
-
-/*-------------------------------------------------------------------------*/
-
-/* OMAP1 */
-#define	USB_TRANSCEIVER_CTRL		(0xfffe1000 + 0x0064)
-#	define	CONF_USB2_UNI_R		(1 << 8)
-#	define	CONF_USB1_UNI_R		(1 << 7)
-#	define	CONF_USB_PORT0_R(x)	(((x)>>4)&0x7)
-#	define	CONF_USB0_ISOLATE_R	(1 << 3)
-#	define	CONF_USB_PWRDN_DM_R	(1 << 2)
-#	define	CONF_USB_PWRDN_DP_R	(1 << 1)
-
-/* OMAP2 */
-#	define	USB_UNIDIR			0x0
-#	define	USB_UNIDIR_TLL			0x1
-#	define	USB_BIDIR			0x2
-#	define	USB_BIDIR_TLL			0x3
-#	define	USBTXWRMODEI(port, x)	((x) << (22 - (port * 2)))
-#	define	USBT2TLL5PI		(1 << 17)
-#	define	USB0PUENACTLOI		(1 << 16)
-#	define	USBSTANDBYCTRL		(1 << 15)
 /* AM35x */
 /* USB 2.0 PHY Control */
 #define CONF2_PHY_GPIOMODE	(1 << 23)

arch/arm/plat-omap/sram.c

@@ -85,7 +85,7 @@ static int is_sram_locked(void)
 			__raw_writel(0xCFDE, OMAP24XX_VA_READPERM0);  /* all i-read */
 			__raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
 		}
-		if (cpu_is_omap34xx() && !cpu_is_am33xx()) {
+		if (cpu_is_omap34xx()) {
 			__raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
 			__raw_writel(0xFFFF, OMAP34XX_VA_READPERM0);  /* all i-read */
 			__raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
@@ -123,7 +123,7 @@ static void __init omap_detect_sram(void)
 				omap_sram_size = 0x800; /* 2K */
 			}
 		} else {
-			if (cpu_is_am33xx()) {
+			if (soc_is_am33xx()) {
 				omap_sram_start = AM33XX_SRAM_PA;
 				omap_sram_size = 0x10000; /* 64K */
 			} else if (cpu_is_omap34xx()) {
@@ -386,7 +386,7 @@ int __init omap_sram_init(void)
 		omap242x_sram_init();
 	else if (cpu_is_omap2430())
 		omap243x_sram_init();
-	else if (cpu_is_am33xx())
+	else if (soc_is_am33xx())
 		am33xx_sram_init();
 	else if (cpu_is_omap34xx())
 		omap34xx_sram_init();

arch/arm/plat-omap/usb.c

- /*
- * arch/arm/plat-omap/usb.c -- platform level USB initialization
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#undef	DEBUG
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <plat/usb.h>
-#include <plat/board.h>
-
-#include <mach/hardware.h>
-
-#ifdef	CONFIG_ARCH_OMAP_OTG
-
-void __init
-omap_otg_init(struct omap_usb_config *config)
-{
-	u32		syscon;
-	int		alt_pingroup = 0;
-
-	/* NOTE:  no bus or clock setup (yet?) */
-
-	syscon = omap_readl(OTG_SYSCON_1) & 0xffff;
-	if (!(syscon & OTG_RESET_DONE))
-		pr_debug("USB resets not complete?\n");
-
-	//omap_writew(0, OTG_IRQ_EN);
-
-	/* pin muxing and transceiver pinouts */
-	if (config->pins[0] > 2)	/* alt pingroup 2 */
-		alt_pingroup = 1;
-	syscon |= config->usb0_init(config->pins[0], is_usb0_device(config));
-	syscon |= config->usb1_init(config->pins[1]);
-	syscon |= config->usb2_init(config->pins[2], alt_pingroup);
-	pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
-	omap_writel(syscon, OTG_SYSCON_1);
-
-	syscon = config->hmc_mode;
-	syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
-#ifdef	CONFIG_USB_OTG
-	if (config->otg)
-		syscon |= OTG_EN;
-#endif
-	if (cpu_class_is_omap1())
-		pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
-			 omap_readl(USB_TRANSCEIVER_CTRL));
-	pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2));
-	omap_writel(syscon, OTG_SYSCON_2);
-
-	printk("USB: hmc %d", config->hmc_mode);
-	if (!alt_pingroup)
-		printk(", usb2 alt %d wires", config->pins[2]);
-	else if (config->pins[0])
-		printk(", usb0 %d wires%s", config->pins[0],
-			is_usb0_device(config) ? " (dev)" : "");
-	if (config->pins[1])
-		printk(", usb1 %d wires", config->pins[1]);
-	if (!alt_pingroup && config->pins[2])
-		printk(", usb2 %d wires", config->pins[2]);
-	if (config->otg)
-		printk(", Mini-AB on usb%d", config->otg - 1);
-	printk("\n");
-
-	if (cpu_class_is_omap1()) {
-		u16 w;
-
-		/* leave USB clocks/controllers off until needed */
-		w = omap_readw(ULPD_SOFT_REQ);
-		w &= ~SOFT_USB_CLK_REQ;
-		omap_writew(w, ULPD_SOFT_REQ);
-
-		w = omap_readw(ULPD_CLOCK_CTRL);
-		w &= ~USB_MCLK_EN;
-		w |= DIS_USB_PVCI_CLK;
-		omap_writew(w, ULPD_CLOCK_CTRL);
-	}
-	syscon = omap_readl(OTG_SYSCON_1);
-	syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
-
-#ifdef	CONFIG_USB_GADGET_OMAP
-	if (config->otg || config->register_dev) {
-		struct platform_device *udc_device = config->udc_device;
-		int status;
-
-		syscon &= ~DEV_IDLE_EN;
-		udc_device->dev.platform_data = config;
-		status = platform_device_register(udc_device);
-		if (status)
-			pr_debug("can't register UDC device, %d\n", status);
-	}
-#endif
-
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-	if (config->otg || config->register_host) {
-		struct platform_device *ohci_device = config->ohci_device;
-		int status;
-
-		syscon &= ~HST_IDLE_EN;
-		ohci_device->dev.platform_data = config;
-		status = platform_device_register(ohci_device);
-		if (status)
-			pr_debug("can't register OHCI device, %d\n", status);
-	}
-#endif
-
-#ifdef	CONFIG_USB_OTG
-	if (config->otg) {
-		struct platform_device *otg_device = config->otg_device;
-		int status;
-
-		syscon &= ~OTG_IDLE_EN;
-		otg_device->dev.platform_data = config;
-		status = platform_device_register(otg_device);
-		if (status)
-			pr_debug("can't register OTG device, %d\n", status);
-	}
-#endif
-	pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
-	omap_writel(syscon, OTG_SYSCON_1);
-}
-
-#else
-void omap_otg_init(struct omap_usb_config *config) {}
-#endif

drivers/usb/gadget/Kconfig

@@ -185,7 +185,7 @@ config USB_FUSB300
 
 config USB_OMAP
 	tristate "OMAP USB Device Controller"
-	depends on ARCH_OMAP
+	depends on ARCH_OMAP1
 	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
 	select USB_OTG_UTILS if ARCH_OMAP
 	help

drivers/usb/gadget/omap_udc.c

@@ -44,7 +44,8 @@
 #include <asm/mach-types.h>
 
 #include <plat/dma.h>
-#include <plat/usb.h>
+
+#include <mach/usb.h>
 
 #include "omap_udc.h"
 

drivers/usb/host/Kconfig

@@ -308,7 +308,7 @@ config USB_OHCI_HCD
 
 config USB_OHCI_HCD_OMAP1
 	bool "OHCI support for OMAP1/2 chips"
-	depends on USB_OHCI_HCD && (ARCH_OMAP1 || ARCH_OMAP2)
+	depends on USB_OHCI_HCD && ARCH_OMAP1
 	default y
 	---help---
 	  Enables support for the OHCI controller on OMAP1/2 chips.

drivers/usb/host/ohci-omap.c

@@ -20,14 +20,15 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 
-#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
 #include <plat/mux.h>
-#include <mach/irqs.h>
 #include <plat/fpga.h>
-#include <plat/usb.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/usb.h>
 
 
 /* OMAP-1510 OHCI has its own MMU for DMA */

drivers/usb/otg/isp1301_omap.c

@@ -36,9 +36,9 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/usb.h>
 #include <plat/mux.h>
 
+#include <mach/usb.h>
 
 #ifndef	DEBUG
 #undef	VERBOSE