ARM: sunxi: common-regulators: Drop pinmux settings for GPIO pins

As part of our effort to move pinctrl/GPIO interlocking into the
driver where it belongs, this patch drops the definition and usage
of the pinmux settings for the common regulators defined in
sunxi-common-regulators.dtsi.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts

@@ -120,10 +120,6 @@
 	status = "okay";
 };
 
-&usb2_vbus_pin_a {
-	pins = "PH6";
-};
-
 &usb_otg {
 	dr_mode = "otg";
 	status = "okay";

arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts

@@ -136,14 +136,6 @@
 	status = "okay";
 };
 
-&usb0_vbus_pin_a {
-	pins = "PG13";
-};
-
-&usb1_vbus_pin_a {
-	pins = "PB10";
-};
-
 &usb_otg {
 	dr_mode = "host";
 	status = "okay";

arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts

@@ -168,10 +168,6 @@
 	status = "okay";
 };
 
-&usb1_vbus_pin_a {
-	pins = "PG13";
-};
-
 &usbphy {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>;

arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts

@@ -271,10 +271,6 @@
 	status = "okay";
 };
 
-&usb0_vbus_pin_a {
-	pins = "PG11";
-};
-
 &usbphy {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>;

arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts

@@ -216,10 +216,6 @@
 	status = "okay";
 };
 
-&usb1_vbus_pin_a {
-	pins = "PG12";
-};
-
 &usbphy {
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";

arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts

@@ -207,10 +207,6 @@
 	status = "okay";
 };
 
-&usb0_vbus_pin_a {
-	pins = "PG12";
-};
-
 &usbphy {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;

arch/arm/boot/dts/sun5i-a13-hsg-h702.dts

@@ -186,7 +186,6 @@
 };
 
 &reg_usb0_vbus {
-	pinctrl-0 = <&usb0_vbus_pin_a>;
 	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
 	status = "okay";
 };
@@ -202,10 +201,6 @@
 	status = "okay";
 };
 
-&usb0_vbus_pin_a {
-	pins = "PG12";
-};
-
 &usbphy {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;

arch/arm/boot/dts/sun5i-a13-olinuxino.dts

@@ -269,10 +269,6 @@
 	status = "okay";
 };
 
-&usb0_vbus_pin_a {
-	pins = "PG12";
-};
-
 &usbphy {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;

arch/arm/boot/dts/sun6i-a31-hummingbird.dts

@@ -344,11 +344,6 @@
 	status = "okay";
 };
 
-&usb1_vbus_pin_a {
-	/* different pin from sunxi-common-regulators */
-	pins = "PH24";
-};
-
 &usbphy {
 	usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
 	usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */

arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts

@@ -85,10 +85,6 @@
 	};
 };
 
-&ahci_pwr_pin_a {
-	pins = "PB3";
-};
-
 &ahci {
 	target-supply = <&reg_ahci_5v>;
 	status = "okay";
@@ -319,10 +315,6 @@
 	status = "okay";
 };
 
-&usb2_vbus_pin_a {
-	pins = "PH12";
-};
-
 &usbphy {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>;

arch/arm/boot/dts/sun7i-a20-pcduino3.dts

@@ -106,10 +106,6 @@
 	status = "okay";
 };
 
-&ahci_pwr_pin_a {
-	pins = "PH2";
-};
-
 &codec {
 	status = "okay";
 };

arch/arm/boot/dts/sun8i-h3-orangepi-2.dts

@@ -195,10 +195,6 @@
 	status = "disabled";
 };
 
-&usb1_vbus_pin_a {
-	pins = "PG13";
-};
-
 &usbphy {
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";

arch/arm/boot/dts/sunxi-common-regulators.dtsi

@@ -44,33 +44,9 @@
 
 #include <dt-bindings/gpio/gpio.h>
 
-&pio {
-	ahci_pwr_pin_a: ahci_pwr_pin@0 {
-		pins = "PB8";
-		function = "gpio_out";
-	};
-
-	usb0_vbus_pin_a: usb0_vbus_pin@0 {
-		pins = "PB9";
-		function = "gpio_out";
-	};
-
-	usb1_vbus_pin_a: usb1_vbus_pin@0 {
-		pins = "PH6";
-		function = "gpio_out";
-	};
-
-	usb2_vbus_pin_a: usb2_vbus_pin@0 {
-		pins = "PH3";
-		function = "gpio_out";
-	};
-};
-
 / {
 	reg_ahci_5v: ahci-5v {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ahci_pwr_pin_a>;
 		regulator-name = "ahci-5v";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -82,8 +58,6 @@
 
 	reg_usb0_vbus: usb0-vbus {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb0_vbus_pin_a>;
 		regulator-name = "usb0-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -94,8 +68,6 @@
 
 	reg_usb1_vbus: usb1-vbus {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb1_vbus_pin_a>;
 		regulator-name = "usb1-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -107,8 +79,6 @@
 
 	reg_usb2_vbus: usb2-vbus {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb2_vbus_pin_a>;
 		regulator-name = "usb2-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;