Merge tag 'sunxi-dt-for-3.20' of...

Merge tag 'sunxi-dt-for-3.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Merge "Allwinner device tree changes for 3.20" from Maxime Ripard:

A lot of changes to the device tree for the 3.20 merge window, mostly with:
  - More DT license convertions, only two DTS and two DTSI are still uncertain
    and have not been converted yet
  - Use the C-preprocessor includes in the device trees.
  - Add support for the A31s SoC and improve the A80 support
  - Add IR receiver, lradc, PS/2 support
  - Add cpufreq support for all SoCs but the A23 and A80.
  - And a lot of new boards

* tag 'sunxi-dt-for-3.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (64 commits)
  ARM: dts: sun5i: Enable axp209 support on A13-OLinuxIno
  ARM: sunxi: dts: Add A10/A20 PS2 pin muxing options
  ARM: sunxi: dts: Add PS2 nodes to dtsi for A10,A20
  ARM: dts: sun6i: Add resistive touchscreen controller node to dtsi
  ARM: dts: sun4i: Add Hyundau A7HD board
  ARM: dts: sun4i: Add Marsboard A10 board
  ARM: dts: sun9i: Enable mmc2 on A80 Optimus Board
  ARM: dts: sun9i: Add 8 bit mmc pinmux setting for mmc2
  ARM: dts: sun9i: Enable mmc0 on A80 Optimus Board
  ARM: dts: sun9i: Convert a80 optimus board dts to label referencing
  ARM: dts: sun9i: Add mmc controller nodes to the A80 dtsi
  ARM: dts: sun9i: Add mmc config clock nodes
  ARM: dts: sunxi: Add missing mdio label
  ARM: dts: sun5i: Add mk802_a10s board
  ARM: dts: sun4i: Add mk802ii board
  ARM: dts: sun4i: Add mk802 board
  ARM: dts: sun4i: Add dts file for Chuwi V7 CW0825 tablet
  ARM: dts: sun7i: Add dts file for Bananapro board
  ARM: sun6i: Enable ARM arch timers
  ARM: dts: sun6i: Convert hummingbird a31 dts to label references
  ...
Signed-off-by: NOlof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -508,13 +508,19 @@ dtb-$(CONFIG_ARCH_STI) += \
 dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
 	sun4i-a10-ba10-tvbox.dtb \
+	sun4i-a10-chuwi-v7-cw0825.dtb \
 	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-marsboard.dtb \
 	sun4i-a10-mini-xplus.dtb \
+	sun4i-a10-mk802.dtb \
+	sun4i-a10-mk802ii.dtb \
 	sun4i-a10-hackberry.dtb \
+	sun4i-a10-hyundai-a7hd.dtb \
 	sun4i-a10-inet97fv2.dtb \
 	sun4i-a10-olinuxino-lime.dtb \
 	sun4i-a10-pcduino.dtb
 dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-mk802.dtb \
 	sun5i-a10s-olinuxino-micro.dtb \
 	sun5i-a10s-r7-tv-dongle.dtb \
 	sun5i-a13-hsg-h702.dtb \
@@ -524,9 +530,11 @@ dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-app4-evb1.dtb \
 	sun6i-a31-colombus.dtb \
 	sun6i-a31-hummingbird.dtb \
-	sun6i-a31-m9.dtb
+	sun6i-a31-m9.dtb \
+	sun6i-a31s-cs908.dtb
 dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-bananapi.dtb \
+	sun7i-a20-bananapro.dtb \
 	sun7i-a20-cubieboard2.dtb \
 	sun7i-a20-cubietruck.dtb \
 	sun7i-a20-hummingbird.dtb \
@@ -537,7 +545,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-olinuxino-micro.dtb \
 	sun7i-a20-pcduino3.dtb
 dtb-$(CONFIG_MACH_SUN8I) += \
-	sun8i-a23-ippo-q8h-v5.dtb
+	sun8i-a23-ippo-q8h-v5.dtb \
+	sun8i-a23-ippo-q8h-v1.2.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \

arch/arm/boot/dts/axp209.dtsi

+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP202/209 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP20X.php
+ * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf
+ */
+
+&axp209 {
+	compatible = "x-powers,axp209";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <1500>;
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_ldo1: ldo1 {
+			/* LDO1 is a fixed output regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-name = "ldo1";
+		};
+
+		reg_ldo2: ldo2 {
+			regulator-name = "ldo2";
+		};
+
+		reg_ldo3: ldo3 {
+			regulator-name = "ldo3";
+		};
+
+		reg_ldo4: ldo4 {
+			regulator-name = "ldo4";
+		};
+
+		reg_ldo5: ldo5 {
+			regulator-name = "ldo5";
+		};
+	};
+};

arch/arm/boot/dts/sun4i-a10-a1000.dts

@@ -48,8 +48,11 @@
  */
 
 /dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Mele A1000";
@@ -77,7 +80,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -112,15 +115,15 @@
 			emac_power_pin_a1000: emac_power_pin@0 {
 				allwinner,pins = "PH15";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			led_pins_a1000: led_pins@0 {
 				allwinner,pins = "PH10", "PH20";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -159,12 +162,12 @@
 
 		red {
 			label = "a1000:red:usr";
-			gpios = <&pio 7 10 0>;
+			gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>;
 		};
 
 		blue {
 			label = "a1000:blue:usr";
-			gpios = <&pio 7 20 0>;
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -176,7 +179,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		enable-active-high;
-		gpio = <&pio 7 15 0>;
+		gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
 	};
 
 	reg_usb1_vbus: usb1-vbus {

arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts

@@ -46,8 +46,10 @@
  */
 
 /dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "BA10 tvbox";
@@ -74,7 +76,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -140,7 +142,7 @@
 	};
 
 	reg_usb2_vbus: usb2-vbus {
-		gpio = <&pio 7 12 0>;
+		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 };

arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts

+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Chuwi V7 CW0825";
+	compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};

arch/arm/boot/dts/sun4i-a10-cubieboard.dts

@@ -47,8 +47,11 @@
  */
 
 /dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Cubietech Cubieboard";
@@ -75,7 +78,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -111,8 +114,8 @@
 			led_pins_cubieboard: led_pins@0 {
 				allwinner,pins = "PH20", "PH21";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -134,12 +137,8 @@
 			status = "okay";
 
 			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
 				reg = <0x34>;
 				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
 			};
 		};
 
@@ -148,6 +147,12 @@
 			pinctrl-0 = <&i2c1_pins_a>;
 			status = "okay";
 		};
+
+		spi0: spi@01c05000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins_a>;
+			status = "okay";
+		};
 	};
 
 	leds {
@@ -157,12 +162,12 @@
 
 		blue {
 			label = "cubieboard:blue:usr";
-			gpios = <&pio 7 21 0>; /* LED1 */
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */
 		};
 
 		green {
 			label = "cubieboard:green:usr";
-			gpios = <&pio 7 20 0>; /* LED2 */
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -179,3 +184,34 @@
 		status = "okay";
 	};
 };
+
+#include "axp209.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};

arch/arm/boot/dts/sun4i-a10-hackberry.dts

@@ -48,8 +48,11 @@
  */
 
 /dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Miniand Hackberry";
@@ -77,7 +80,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -111,15 +114,15 @@
 			hackberry_hogs: hogs@0 {
 				allwinner,pins = "PH19";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
 					allwinner,pins = "PH12";
 					allwinner,function = "gpio_out";
-					allwinner,drive = <0>;
-					allwinner,pull = <0>;
+					allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+					allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -157,7 +160,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		enable-active-high;
-		gpio = <&pio 7 19 0>;
+		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
 	};
 
 	reg_usb1_vbus: usb1-vbus {
@@ -166,7 +169,7 @@
 
 	reg_usb2_vbus: usb2-vbus {
 		pinctrl-0 = <&usb2_vbus_pin_hackberry>;
-		gpio = <&pio 7 12 0>;
+		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 };

arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts

+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Hyundai A7HD";
+	compatible = "hyundai,a7hd", "allwinner,sun4i-a10";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb2_vbus_pin_a {
+	allwinner,pins = "PH6";
+};
+
+&usbphy {
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};

arch/arm/boot/dts/sun4i-a10-inet97fv2.dts

@@ -48,8 +48,10 @@
  */
 
 /dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "INet-97F Rev 02";
@@ -65,7 +67,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 			cd-inverted;
 			status = "okay";
 		};

arch/arm/boot/dts/sun4i-a10-marsboard.dts

+/*
+ * Copyright 2015 Aleksei Mamlin
+ * Aleksei Mamlin <mamlinav@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "HAOYU Electronics Marsboard A10";
+	compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_marsboard>;
+
+		red1 {
+			label = "marsboard:red1:usr";
+			gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		red2 {
+			label = "marsboard:red2:usr";
+			gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		red3 {
+			label = "marsboard:red3:usr";
+			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		red4 {
+			label = "marsboard:red4:usr";
+			gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_marsboard: led_pins@0 {
+		allwinner,pins = "PB5", "PB6", "PB7", "PB8";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};

arch/arm/boot/dts/sun4i-a10-mini-xplus.dts

@@ -48,8 +48,11 @@
  */
 
 /dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "PineRiver Mini X-Plus";
@@ -61,7 +64,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -91,7 +94,7 @@
 		pinctrl@01c20800 {
 			ir0_pins_a: ir0@0 {
 				/* The ir receiver is not always populated */
-				allwinner,pull = <1>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 		};
 

arch/arm/boot/dts/sun4i-a10-mk802.dts

+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802";
+	compatible = "allwinner,mk802", "allwinner,sun4i-a10";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	usb2_vbus_pin_mk802: usb2_vbus_pin@0 {
+		allwinner,pins = "PH12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	pinctrl-0 = <&usb2_vbus_pin_mk802>;
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};

arch/arm/boot/dts/sun4i-a10-mk802ii.dts

+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802ii";
+	compatible = "allwinner,mk802ii", "allwinner,sun4i-a10";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};

arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts

@@ -46,8 +46,11 @@
  */
 
 /dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Olimex A10-OLinuXino-LIME";
@@ -74,7 +77,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -110,15 +113,15 @@
 			ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
 				allwinner,pins = "PC3";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			led_pins_olinuxinolime: led_pins@0 {
 				allwinner,pins = "PH2";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -151,14 +154,14 @@
 
 		green {
 			label = "a10-olinuxino-lime:green:usr";
-			gpios = <&pio 7 2 0>;
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
 	reg_ahci_5v: ahci-5v {
 		pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
-		gpio = <&pio 2 3 0>;
+		gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 

arch/arm/boot/dts/sun4i-a10-pcduino.dts

@@ -47,8 +47,12 @@
  */
 
 /dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "LinkSprite pcDuino";
@@ -62,6 +66,22 @@
 			status = "okay";
 		};
 
+		pinctrl@01c20800 {
+			led_pins_pcduino: led_pins@0 {
+				allwinner,pins = "PH15", "PH16";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			key_pins_pcduino: key_pins@0 {
+				allwinner,pins = "PH17", "PH18", "PH19";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
 		mdio@01c0b080 {
 			status = "okay";
 
@@ -75,7 +95,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -124,6 +144,48 @@
 		};
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_pcduino>;
+
+		tx {
+			label = "pcduino:green:tx";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
+		};
+
+		rx {
+			label = "pcduino:green:rx";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_pcduino>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			label = "Key Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
+		};
+
+		button@1 {
+			label = "Key Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
+		};
+
+		button@2 {
+			label = "Key Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	reg_usb1_vbus: usb1-vbus {
 		status = "okay";
 	};

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -10,7 +10,12 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+
+#include <dt-bindings/thermal/thermal.h>
+
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -39,15 +44,86 @@
 				 <&ahb_gates 44>;
 			status = "disabled";
 		};
+
+		framebuffer@1 {
+			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+				 <&ahb_gates 44>, <&ahb_gates 46>;
+			status = "disabled";
+		};
+
+		framebuffer@2 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
+				 <&ahb_gates 46>;
+			status = "disabled";
+		};
+
+		framebuffer@3 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
+			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+				 <&ahb_gates 44>, <&ahb_gates 46>;
+			status = "disabled";
+		};
 	};
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a8";
 			reg = <0x0>;
+			clocks = <&cpu>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz    uV */
+				1056000 1500000
+				1008000 1400000
+				912000  1350000
+				864000  1300000
+				624000  1250000
+				>;
+			#cooling-cells = <2>;
+			cooling-min-level = <0>;
+			cooling-max-level = <4>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <850000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
@@ -359,7 +435,8 @@
 			interrupts = <10>;
 			clocks = <&ahb_gates 20>, <&spi0_clk>;
 			clock-names = "ahb", "mod";
-			dmas = <&dma 1 27>, <&dma 1 26>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
@@ -372,7 +449,8 @@
 			interrupts = <11>;
 			clocks = <&ahb_gates 21>, <&spi1_clk>;
 			clock-names = "ahb", "mod";
-			dmas = <&dma 1 9>, <&dma 1 8>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
@@ -387,7 +465,7 @@
 			status = "disabled";
 		};
 
-		mdio@01c0b080 {
+		mdio: mdio@01c0b080 {
 			compatible = "allwinner,sun4i-a10-mdio";
 			reg = <0x01c0b080 0x14>;
 			status = "disabled";
@@ -438,8 +516,8 @@
 			reg-names = "phy_ctrl", "pmu1", "pmu2";
 			clocks = <&usb_clk 8>;
 			clock-names = "usb_phy";
-			resets = <&usb_clk 1>, <&usb_clk 2>;
-			reset-names = "usb1_reset", "usb2_reset";
+			resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
 			status = "disabled";
 		};
 
@@ -469,7 +547,8 @@
 			interrupts = <12>;
 			clocks = <&ahb_gates 22>, <&spi2_clk>;
 			clock-names = "ahb", "mod";
-			dmas = <&dma 1 29>, <&dma 1 28>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
@@ -510,7 +589,8 @@
 			interrupts = <50>;
 			clocks = <&ahb_gates 23>, <&spi3_clk>;
 			clock-names = "ahb", "mod";
-			dmas = <&dma 1 31>, <&dma 1 30>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 31>,
+			       <&dma SUN4I_DMA_DEDICATED 30>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
@@ -538,57 +618,57 @@
 			pwm0_pins_a: pwm0@0 {
 				allwinner,pins = "PB2";
 				allwinner,function = "pwm";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			pwm1_pins_a: pwm1@0 {
 				allwinner,pins = "PI3";
 				allwinner,function = "pwm";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			uart0_pins_a: uart0@0 {
 				allwinner,pins = "PB22", "PB23";
 				allwinner,function = "uart0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			uart0_pins_b: uart0@1 {
 				allwinner,pins = "PF2", "PF4";
 				allwinner,function = "uart0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			uart1_pins_a: uart1@0 {
 				allwinner,pins = "PA10", "PA11";
 				allwinner,function = "uart1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			i2c0_pins_a: i2c0@0 {
 				allwinner,pins = "PB0", "PB1";
 				allwinner,function = "i2c0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			i2c1_pins_a: i2c1@0 {
 				allwinner,pins = "PB18", "PB19";
 				allwinner,function = "i2c1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			i2c2_pins_a: i2c2@0 {
 				allwinner,pins = "PB20", "PB21";
 				allwinner,function = "i2c2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			emac_pins_a: emac0@0 {
@@ -598,36 +678,78 @@
 						"PA11", "PA12", "PA13", "PA14",
 						"PA15", "PA16";
 				allwinner,function = "emac";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			mmc0_pins_a: mmc0@0 {
 				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
 				allwinner,function = "mmc0";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
 				allwinner,pins = "PH1";
 				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			ir0_pins_a: ir0@0 {
 				allwinner,pins = "PB3","PB4";
 				allwinner,function = "ir0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			ir1_pins_a: ir1@0 {
 				allwinner,pins = "PB22","PB23";
 				allwinner,function = "ir1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi0_pins_a: spi0@0 {
+				allwinner,pins = "PI10", "PI11", "PI12", "PI13";
+				allwinner,function = "spi0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi1_pins_a: spi1@0 {
+				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+				allwinner,function = "spi1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi2_pins_a: spi2@0 {
+				allwinner,pins = "PB14", "PB15", "PB16", "PB17";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi2_pins_b: spi2@1 {
+				allwinner,pins = "PC19", "PC20", "PC21", "PC22";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ps20_pins_a: ps20@0 {
+				allwinner,pins = "PI20", "PI21";
+				allwinner,function = "ps2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ps21_pins_a: ps21@0 {
+				allwinner,pins = "PH12", "PH13";
+				allwinner,function = "ps2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -675,6 +797,13 @@
 			status = "disabled";
 		};
 
+		lradc: lradc@01c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
 		sid: eeprom@01c23800 {
 			compatible = "allwinner,sun4i-a10-sid";
 			reg = <0x01c23800 0x10>;
@@ -684,6 +813,7 @@
 			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
 		};
 
 		uart0: serial@01c28000 {
@@ -795,5 +925,21 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
+
+		ps20: ps2@01c2a000 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a000 0x400>;
+			interrupts = <62>;
+			clocks = <&apb1_gates 6>;
+			status = "disabled";
+		};
+
+		ps21: ps2@01c2a400 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a400 0x400>;
+			interrupts = <63>;
+			clocks = <&apb1_gates 7>;
+			status = "disabled";
+		};
 	};
 };

arch/arm/boot/dts/sun5i-a10s-mk802.dts

+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802-A10s";
+	compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_mk802>;
+
+		red {
+			label = "mk802:red:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_mk802: led_pins@0 {
+		allwinner,pins = "PB2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_mk802: mmc0_cd_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb1_vbus_pin_mk802: usb1_vbus_pin@0 {
+		allwinner,pins = "PB10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_mk802>;
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};

arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts

@@ -48,8 +48,12 @@
  */
 
 /dts-v1/;
-/include/ "sun5i-a10s.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Olimex A10s-Olinuxino Micro";
@@ -76,7 +80,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 6 1 0>; /* PG1 */
+			cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -86,7 +90,7 @@
 			pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 6 13 0>; /* PG13 */
+			cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -108,29 +112,69 @@
 			mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
 				allwinner,pins = "PG1";
 				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
 				allwinner,pins = "PG13";
 				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			led_pins_olinuxino: led_pins@0 {
 				allwinner,pins = "PE3";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
 				allwinner,pins = "PB10";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		lradc: lradc@01c22800 {
+			vref-supply = <&reg_vcc3v0>;
+			status = "okay";
+
+			button@191 {
+				label = "Volume Up";
+				linux,code = <KEY_VOLUMEUP>;
+				channel = <0>;
+				voltage = <191274>;
+			};
+
+			button@392 {
+				label = "Volume Down";
+				linux,code = <KEY_VOLUMEDOWN>;
+				channel = <0>;
+				voltage = <392644>;
+			};
+
+			button@601 {
+				label = "Menu";
+				linux,code = <KEY_MENU>;
+				channel = <0>;
+				voltage = <601151>;
+			};
+
+			button@795 {
+				label = "Enter";
+				linux,code = <KEY_ENTER>;
+				channel = <0>;
+				voltage = <795090>;
+			};
+
+			button@987 {
+				label = "Home";
+				linux,code = <KEY_HOMEPAGE>;
+				channel = <0>;
+				voltage = <987387>;
 			};
 		};
 
@@ -185,14 +229,14 @@
 
 		green {
 			label = "a10s-olinuxino-micro:green:usr";
-			gpios = <&pio 4 3 0>;
+			gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
 	reg_usb1_vbus: usb1-vbus {
 		pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
-		gpio = <&pio 1 10 0>;
+		gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 };

arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts

@@ -46,8 +46,11 @@
  */
 
 /dts-v1/;
-/include/ "sun5i-a10s.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "R7 A10s hdmi tv-stick";
@@ -59,7 +62,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 6 1 0>; /* PG1 */
+			cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -90,22 +93,22 @@
 			mmc0_cd_pin_r7: mmc0_cd_pin@0 {
 				allwinner,pins = "PG1";
 				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			led_pins_r7: led_pins@0 {
 				allwinner,pins = "PB2";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			usb1_vbus_pin_r7: usb1_vbus_pin@0 {
 				allwinner,pins = "PG13";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -123,14 +126,14 @@
 
 		green {
 			label = "r7-tv-dongle:green:usr";
-			gpios = <&pio 1 2 0>;
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
 	reg_usb1_vbus: usb1-vbus {
 		pinctrl-0 = <&usb1_vbus_pin_r7>;
-		gpio = <&pio 6 13 0>;
+		gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 };

arch/arm/boot/dts/sun5i-a10s.dtsi

@@ -11,7 +11,10 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -36,6 +39,14 @@
 				 <&ahb_gates 44>;
 			status = "disabled";
 		};
+
+		framebuffer@1 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+			status = "disabled";
+		};
 	};
 
 	cpus {
@@ -320,7 +331,8 @@
 			interrupts = <10>;
 			clocks = <&ahb_gates 20>, <&spi0_clk>;
 			clock-names = "ahb", "mod";
-			dmas = <&dma 1 27>, <&dma 1 26>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
@@ -333,7 +345,8 @@
 			interrupts = <11>;
 			clocks = <&ahb_gates 21>, <&spi1_clk>;
 			clock-names = "ahb", "mod";
-			dmas = <&dma 1 9>, <&dma 1 8>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
@@ -348,7 +361,7 @@
 			status = "disabled";
 		};
 
-		mdio@01c0b080 {
+		mdio: mdio@01c0b080 {
 			compatible = "allwinner,sun4i-a10-mdio";
 			reg = <0x01c0b080 0x14>;
 			status = "disabled";
@@ -390,8 +403,8 @@
 			reg-names = "phy_ctrl", "pmu1";
 			clocks = <&usb_clk 8>;
 			clock-names = "usb_phy";
-			resets = <&usb_clk 1>;
-			reset-names = "usb1_reset";
+			resets = <&usb_clk 0>, <&usb_clk 1>;
+			reset-names = "usb0_reset", "usb1_reset";
 			status = "disabled";
 		};
 
@@ -421,7 +434,8 @@
 			interrupts = <12>;
 			clocks = <&ahb_gates 22>, <&spi2_clk>;
 			clock-names = "ahb", "mod";
-			dmas = <&dma 1 29>, <&dma 1 28>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
@@ -449,22 +463,22 @@
 			uart0_pins_a: uart0@0 {
 				allwinner,pins = "PB19", "PB20";
 				allwinner,function = "uart0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			uart2_pins_a: uart2@0 {
 				allwinner,pins = "PC18", "PC19";
 				allwinner,function = "uart2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			uart3_pins_a: uart3@0 {
 				allwinner,pins = "PG9", "PG10";
 				allwinner,function = "uart3";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			emac_pins_a: emac0@0 {
@@ -474,43 +488,43 @@
 						"PA11", "PA12", "PA13", "PA14",
 						"PA15", "PA16";
 				allwinner,function = "emac";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			i2c0_pins_a: i2c0@0 {
 				allwinner,pins = "PB0", "PB1";
 				allwinner,function = "i2c0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			i2c1_pins_a: i2c1@0 {
 				allwinner,pins = "PB15", "PB16";
 				allwinner,function = "i2c1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			i2c2_pins_a: i2c2@0 {
 				allwinner,pins = "PB17", "PB18";
 				allwinner,function = "i2c2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			mmc0_pins_a: mmc0@0 {
 				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
 				allwinner,function = "mmc0";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			mmc1_pins_a: mmc1@0 {
 				allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8";
 				allwinner,function = "mmc1";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -526,6 +540,13 @@
 			reg = <0x01c20c90 0x10>;
 		};
 
+		lradc: lradc@01c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
 		sid: eeprom@01c23800 {
 			compatible = "allwinner,sun4i-a10-sid";
 			reg = <0x01c23800 0x10>;
@@ -535,6 +556,7 @@
 			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
 		};
 
 		uart0: serial@01c28000 {

arch/arm/boot/dts/sun5i-a13-hsg-h702.dts

@@ -46,8 +46,11 @@
  */
 
 /dts-v1/;
-/include/ "sun5i-a13.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "HSG H702";
@@ -59,17 +62,13 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 6 0 0>; /* PG0 */
+			cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
 			cd-inverted;
 			status = "okay";
 		};
 
 		usbphy: phy@01c13400 {
-			/*
-			 * There doesn't seem to be a GPIO for controlling
-			 * usb1 vbus, despite the fex file saying otherwise.
-			 */
-			usb1_vbus-supply = <&reg_vcc5v0>;
+			usb1_vbus-supply = <&reg_ldo3>;
 			status = "okay";
 		};
 
@@ -85,8 +84,8 @@
 			mmc0_cd_pin_h702: mmc0_cd_pin@0 {
 				allwinner,pins = "PG0";
 				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 		};
 
@@ -102,11 +101,8 @@
 			status = "okay";
 
 			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
 				reg = <0x34>;
 				interrupts = <0>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
 			};
 		};
 
@@ -128,3 +124,40 @@
 		};
 	};
 };
+
+#include "axp209.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};

arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts

@@ -47,8 +47,11 @@
  */
 
 /dts-v1/;
-/include/ "sun5i-a13.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Olimex A13-Olinuxino Micro";
@@ -60,7 +63,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 6 0 0>; /* PG0 */
+			cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -82,22 +85,22 @@
 			mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
 				allwinner,pins = "PG0";
 				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			led_pins_olinuxinom: led_pins@0 {
 				allwinner,pins = "PG9";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
 				allwinner,pins = "PG11";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -133,14 +136,14 @@
 
 		power {
 			label = "a13-olinuxino-micro:green:power";
-			gpios = <&pio 6 9 0>;
+			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
 	reg_usb1_vbus: usb1-vbus {
 		pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
-		gpio = <&pio 6 11 0>;
+		gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 };

arch/arm/boot/dts/sun5i-a13-olinuxino.dts

@@ -48,8 +48,12 @@
  */
 
 /dts-v1/;
-/include/ "sun5i-a13.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Olimex A13-Olinuxino";
@@ -61,7 +65,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 6 0 0>; /* PG0 */
+			cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -83,22 +87,62 @@
 			mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
 				allwinner,pins = "PG0";
 				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			led_pins_olinuxino: led_pins@0 {
 				allwinner,pins = "PG9";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
 				allwinner,pins = "PG11";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		lradc: lradc@01c22800 {
+			vref-supply = <&reg_vcc3v0>;
+			status = "okay";
+
+			button@191 {
+				label = "Volume Up";
+				linux,code = <KEY_VOLUMEUP>;
+				channel = <0>;
+				voltage = <191274>;
+			};
+
+			button@392 {
+				label = "Volume Down";
+				linux,code = <KEY_VOLUMEDOWN>;
+				channel = <0>;
+				voltage = <392644>;
+			};
+
+			button@601 {
+				label = "Menu";
+				linux,code = <KEY_MENU>;
+				channel = <0>;
+				voltage = <601151>;
+			};
+
+			button@795 {
+				label = "Enter";
+				linux,code = <KEY_ENTER>;
+				channel = <0>;
+				voltage = <795090>;
+			};
+
+			button@987 {
+				label = "Home";
+				linux,code = <KEY_HOMEPAGE>;
+				channel = <0>;
+				voltage = <987387>;
 			};
 		};
 
@@ -112,6 +156,15 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2c0_pins_a>;
 			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
 		};
 
 		i2c1: i2c@01c2b000 {
@@ -133,14 +186,14 @@
 		pinctrl-0 = <&led_pins_olinuxino>;
 
 		power {
-			gpios = <&pio 6 9 0>;
+			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
 	reg_usb1_vbus: usb1-vbus {
 		pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
-		gpio = <&pio 6 11 0>;
+		gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 };

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -11,7 +11,12 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+
+#include <dt-bindings/thermal/thermal.h>
+
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -21,13 +26,75 @@
 		serial1 = &uart3;
 	};
 
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+			status = "disabled";
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		cpu@0 {
+
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a8";
 			reg = <0x0>;
+			clocks = <&cpu>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz    uV */
+				1104000	1500000
+				1008000 1400000
+				912000  1350000
+				864000  1300000
+				624000  1200000
+				576000  1200000
+				432000  1200000
+				>;
+			#cooling-cells = <2>;
+			cooling-min-level = <0>;
+			cooling-max-level = <6>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <850000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
@@ -304,7 +371,8 @@
 			interrupts = <10>;
 			clocks = <&ahb_gates 20>, <&spi0_clk>;
 			clock-names = "ahb", "mod";
-			dmas = <&dma 1 27>, <&dma 1 26>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
@@ -317,7 +385,8 @@
 			interrupts = <11>;
 			clocks = <&ahb_gates 21>, <&spi1_clk>;
 			clock-names = "ahb", "mod";
-			dmas = <&dma 1 9>, <&dma 1 8>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
@@ -349,8 +418,8 @@
 			reg-names = "phy_ctrl", "pmu1";
 			clocks = <&usb_clk 8>;
 			clock-names = "usb_phy";
-			resets = <&usb_clk 1>;
-			reset-names = "usb1_reset";
+			resets = <&usb_clk 0>, <&usb_clk 1>;
+			reset-names = "usb0_reset", "usb1_reset";
 			status = "disabled";
 		};
 
@@ -380,7 +449,8 @@
 			interrupts = <12>;
 			clocks = <&ahb_gates 22>, <&spi2_clk>;
 			clock-names = "ahb", "mod";
-			dmas = <&dma 1 29>, <&dma 1 28>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
@@ -408,43 +478,43 @@
 			uart1_pins_a: uart1@0 {
 				allwinner,pins = "PE10", "PE11";
 				allwinner,function = "uart1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			uart1_pins_b: uart1@1 {
 				allwinner,pins = "PG3", "PG4";
 				allwinner,function = "uart1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			i2c0_pins_a: i2c0@0 {
 				allwinner,pins = "PB0", "PB1";
 				allwinner,function = "i2c0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			i2c1_pins_a: i2c1@0 {
 				allwinner,pins = "PB15", "PB16";
 				allwinner,function = "i2c1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			i2c2_pins_a: i2c2@0 {
 				allwinner,pins = "PB17", "PB18";
 				allwinner,function = "i2c2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			mmc0_pins_a: mmc0@0 {
 				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
 				allwinner,function = "mmc0";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -460,6 +530,13 @@
 			reg = <0x01c20c90 0x10>;
 		};
 
+		lradc: lradc@01c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
 		sid: eeprom@01c23800 {
 			compatible = "allwinner,sun4i-a10-sid";
 			reg = <0x01c23800 0x10>;
@@ -469,6 +546,7 @@
 			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
 		};
 
 		uart1: serial@01c28400 {

arch/arm/boot/dts/sun6i-a31-app4-evb1.dts

@@ -48,8 +48,11 @@
  */
 
 /dts-v1/;
-/include/ "sun6i-a31.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Allwinner A31 APP4 EVB1 Evaluation Board";
@@ -64,8 +67,8 @@
 			usb1_vbus_pin_a: usb1_vbus_pin@0 {
 				allwinner,pins = "PH27";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -87,7 +90,7 @@
 
 	reg_usb1_vbus: usb1-vbus {
 		pinctrl-0 = <&usb1_vbus_pin_a>;
-		gpio = <&pio 7 27 0>;
+		gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 };

arch/arm/boot/dts/sun6i-a31-colombus.dts

@@ -48,8 +48,11 @@
  */
 
 /dts-v1/;
-/include/ "sun6i-a31.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "WITS A31 Colombus Evaluation Board";
@@ -65,7 +68,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
 			vmmc-supply = <&reg_vcc3v0>;
 			bus-width = <4>;
-			cd-gpios = <&pio 0 8 0>; /* PA8 */
+			cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -81,21 +84,21 @@
 
 		pio: pinctrl@01c20800 {
 			mmc0_pins_a: mmc0@0 {
-				allwinner,pull = <1>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
 				allwinner,pins = "PA8";
 				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
 				allwinner,pins = "PH24";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -127,7 +130,7 @@
 	reg_usb2_vbus: usb2-vbus {
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb2_vbus_pin_colombus>;
-		gpio = <&pio 7 24 0>;
+		gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 };

arch/arm/boot/dts/sun6i-a31-hummingbird.dts

@@ -48,8 +48,11 @@
  */
 
 /dts-v1/;
-/include/ "sun6i-a31.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Merrii A31 Hummingbird";
@@ -58,72 +61,41 @@
 	chosen {
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};
+};
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
-			vmmc-supply = <&reg_vcc3v0>;
-			bus-width = <4>;
-			cd-gpios = <&pio 0 8 0>; /* PA8 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c19400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c1a000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c1a400 {
+&ehci0 {
 	status = "okay";
-		};
-
-		pio: pinctrl@01c20800 {
-			mmc0_pins_a: mmc0@0 {
-				/* external pull-ups missing for some pins */
-				allwinner,pull = <1>;
-			};
-
-			mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
-				allwinner,pins = "PA8";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			usb1_vbus_pin_a: usb1_vbus_pin@0 {
-				allwinner,pins = "PH24";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
+};
 
-		uart0: serial@01c28000 {
+&gmac {
 	pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 30000>;
 	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
 	};
+};
 
-		i2c0: i2c@01c2ac00 {
+&i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
 	/* pull-ups and devices require AXP221 DLDO3 */
 	status = "failed";
-		};
+};
 
-		i2c1: i2c@01c2b000 {
+&i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
-		};
+};
 
-		i2c2: i2c@01c2b400 {
+&i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
@@ -132,24 +104,53 @@
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
-		};
+};
 
-		gmac: ethernet@01c30000 {
+&mmc0 {
 	pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_rgmii_a>;
-			phy = <&phy1>;
-			phy-mode = "rgmii";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+	cd-inverted;
 	status = "okay";
+};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-	};
+&mmc0_pins_a {
+	/* external pull-ups missing for some pins */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_a>;
-		gpio = <&pio 7 24 0>; /* PH24 */
+&ohci0 {
 	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
+		allwinner,pins = "PA8";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 };
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb1_vbus_pin_a {
+	/* different pin from sunxi-common-regulators */
+	allwinner,pins = "PH24";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};

arch/arm/boot/dts/sun6i-a31-m9.dts

@@ -46,8 +46,11 @@
  */
 
 /dts-v1/;
-/include/ "sun6i-a31.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Mele M9 / A1000G Quad top set box";
@@ -63,7 +66,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 22 0>; /* PH22 */
+			cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -85,22 +88,22 @@
 			led_pins_m9: led_pins@0 {
 				allwinner,pins = "PH13";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			mmc0_cd_pin_m9: mmc0_cd_pin@0 {
 				allwinner,pins = "PH22";
 				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			usb1_vbus_pin_m9: usb1_vbus_pin@0 {
 				allwinner,pins = "PC27";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -121,6 +124,12 @@
 				reg = <1>;
 			};
 		};
+
+		ir@01f02000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir_pins_a>;
+			status = "okay";
+		};
 	};
 
 	leds {
@@ -130,14 +139,14 @@
 
 		blue {
 			label = "m9:blue:usr";
-			gpios = <&pio 7 13 0>;
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
 	reg_usb1_vbus: usb1-vbus {
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb1_vbus_pin_m9>;
-		gpio = <&pio 2 27 0>;
+		gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 };

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -47,7 +47,11 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -73,6 +77,24 @@
 			clocks = <&pll6 0>;
 			status = "disabled";
 		};
+
+		framebuffer@1 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&pll6 0>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
 	};
 
 	cpus {
@@ -111,10 +133,10 @@
 
 	pmu {
 		compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
-		interrupts = <0 120 4>,
-			     <0 121 4>,
-			     <0 122 4>,
-			     <0 123 4>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	clocks {
@@ -361,7 +383,7 @@
 		dma: dma-controller@01c02000 {
 			compatible = "allwinner,sun6i-a31-dma";
 			reg = <0x01c02000 0x1000>;
-			interrupts = <0 50 4>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb1_gates 6>;
 			resets = <&ahb1_rst 6>;
 			#dma-cells = <1>;
@@ -378,7 +400,7 @@
 			clock-names = "ahb", "mmc";
 			resets = <&ahb1_rst 8>;
 			reset-names = "ahb";
-			interrupts = <0 60 4>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
@@ -389,7 +411,7 @@
 			clock-names = "ahb", "mmc";
 			resets = <&ahb1_rst 9>;
 			reset-names = "ahb";
-			interrupts = <0 61 4>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
@@ -400,7 +422,7 @@
 			clock-names = "ahb", "mmc";
 			resets = <&ahb1_rst 10>;
 			reset-names = "ahb";
-			interrupts = <0 62 4>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
@@ -411,7 +433,7 @@
 			clock-names = "ahb", "mmc";
 			resets = <&ahb1_rst 11>;
 			reset-names = "ahb";
-			interrupts = <0 63 4>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
@@ -442,7 +464,7 @@
 		ehci0: usb@01c1a000 {
 			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
 			reg = <0x01c1a000 0x100>;
-			interrupts = <0 72 4>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb1_gates 26>;
 			resets = <&ahb1_rst 26>;
 			phys = <&usbphy 1>;
@@ -453,7 +475,7 @@
 		ohci0: usb@01c1a400 {
 			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
 			reg = <0x01c1a400 0x100>;
-			interrupts = <0 73 4>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb1_gates 29>, <&usb_clk 16>;
 			resets = <&ahb1_rst 29>;
 			phys = <&usbphy 1>;
@@ -464,7 +486,7 @@
 		ehci1: usb@01c1b000 {
 			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
 			reg = <0x01c1b000 0x100>;
-			interrupts = <0 74 4>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb1_gates 27>;
 			resets = <&ahb1_rst 27>;
 			phys = <&usbphy 2>;
@@ -475,7 +497,7 @@
 		ohci1: usb@01c1b400 {
 			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
 			reg = <0x01c1b400 0x100>;
-			interrupts = <0 75 4>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb1_gates 30>, <&usb_clk 17>;
 			resets = <&ahb1_rst 30>;
 			phys = <&usbphy 2>;
@@ -486,7 +508,7 @@
 		ohci2: usb@01c1c400 {
 			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
 			reg = <0x01c1c400 0x100>;
-			interrupts = <0 77 4>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb1_gates 31>, <&usb_clk 18>;
 			resets = <&ahb1_rst 31>;
 			status = "disabled";
@@ -495,10 +517,10 @@
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun6i-a31-pinctrl";
 			reg = <0x01c20800 0x400>;
-			interrupts = <0 11 4>,
-				     <0 15 4>,
-				     <0 16 4>,
-				     <0 17 4>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 5>;
 			gpio-controller;
 			interrupt-controller;
@@ -509,36 +531,36 @@
 			uart0_pins_a: uart0@0 {
 				allwinner,pins = "PH20", "PH21";
 				allwinner,function = "uart0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			i2c0_pins_a: i2c0@0 {
 				allwinner,pins = "PH14", "PH15";
 				allwinner,function = "i2c0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			i2c1_pins_a: i2c1@0 {
 				allwinner,pins = "PH16", "PH17";
 				allwinner,function = "i2c1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			i2c2_pins_a: i2c2@0 {
 				allwinner,pins = "PH18", "PH19";
 				allwinner,function = "i2c2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			mmc0_pins_a: mmc0@0 {
 				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
 				allwinner,function = "mmc0";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			gmac_pins_mii_a: gmac_mii@0 {
@@ -548,8 +570,8 @@
 						"PA20", "PA21", "PA22", "PA23",
 						"PA24", "PA26", "PA27";
 				allwinner,function = "gmac";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			gmac_pins_gmii_a: gmac_gmii@0 {
@@ -565,8 +587,8 @@
 				 * data lines in GMII mode run at 125MHz and
 				 * might need a higher signal drive strength
 				 */
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			gmac_pins_rgmii_a: gmac_rgmii@0 {
@@ -579,8 +601,8 @@
 				 * data lines in RGMII mode use DDR mode
 				 * and need a higher signal drive strength
 				 */
-				allwinner,drive = <3>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -605,11 +627,11 @@
 		timer@01c20c00 {
 			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0xa0>;
-			interrupts = <0 18 4>,
-				     <0 19 4>,
-				     <0 20 4>,
-				     <0 21 4>,
-				     <0 22 4>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&osc24M>;
 		};
 
@@ -618,10 +640,17 @@
 			reg = <0x01c20ca0 0x20>;
 		};
 
+		rtp: rtp@01c25000 {
+			compatible = "allwinner,sun6i-a31-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
-			interrupts = <0 0 4>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 16>;
@@ -634,7 +663,7 @@
 		uart1: serial@01c28400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
-			interrupts = <0 1 4>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 17>;
@@ -647,7 +676,7 @@
 		uart2: serial@01c28800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28800 0x400>;
-			interrupts = <0 2 4>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 18>;
@@ -660,7 +689,7 @@
 		uart3: serial@01c28c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28c00 0x400>;
-			interrupts = <0 3 4>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 19>;
@@ -673,7 +702,7 @@
 		uart4: serial@01c29000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29000 0x400>;
-			interrupts = <0 4 4>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 20>;
@@ -686,7 +715,7 @@
 		uart5: serial@01c29400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29400 0x400>;
-			interrupts = <0 5 4>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 21>;
@@ -699,7 +728,7 @@
 		i2c0: i2c@01c2ac00 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2ac00 0x400>;
-			interrupts = <0 6 4>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb2_gates 0>;
 			resets = <&apb2_rst 0>;
 			status = "disabled";
@@ -710,7 +739,7 @@
 		i2c1: i2c@01c2b000 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b000 0x400>;
-			interrupts = <0 7 4>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb2_gates 1>;
 			resets = <&apb2_rst 1>;
 			status = "disabled";
@@ -721,7 +750,7 @@
 		i2c2: i2c@01c2b400 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b400 0x400>;
-			interrupts = <0 8 4>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb2_gates 2>;
 			resets = <&apb2_rst 2>;
 			status = "disabled";
@@ -732,7 +761,7 @@
 		i2c3: i2c@01c2b800 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b800 0x400>;
-			interrupts = <0 9 4>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb2_gates 3>;
 			resets = <&apb2_rst 3>;
 			status = "disabled";
@@ -743,7 +772,7 @@
 		gmac: ethernet@01c30000 {
 			compatible = "allwinner,sun7i-a20-gmac";
 			reg = <0x01c30000 0x1054>;
-			interrupts = <0 82 4>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 			clocks = <&ahb1_gates 17>, <&gmac_tx_clk>;
 			clock-names = "stmmaceth", "allwinner_gmac_tx";
@@ -760,10 +789,10 @@
 		timer@01c60000 {
 			compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer";
 			reg = <0x01c60000 0x1000>;
-			interrupts = <0 51 4>,
-				     <0 52 4>,
-				     <0 53 4>,
-				     <0 54 4>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb1_gates 19>;
 			resets = <&ahb1_rst 19>;
 		};
@@ -771,7 +800,7 @@
 		spi0: spi@01c68000 {
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c68000 0x1000>;
-			interrupts = <0 65 4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb1_gates 20>, <&spi0_clk>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma 23>, <&dma 23>;
@@ -783,7 +812,7 @@
 		spi1: spi@01c69000 {
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c69000 0x1000>;
-			interrupts = <0 66 4>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb1_gates 21>, <&spi1_clk>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma 24>, <&dma 24>;
@@ -795,7 +824,7 @@
 		spi2: spi@01c6a000 {
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c6a000 0x1000>;
-			interrupts = <0 67 4>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb1_gates 22>, <&spi2_clk>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma 25>, <&dma 25>;
@@ -807,7 +836,7 @@
 		spi3: spi@01c6b000 {
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c6b000 0x1000>;
-			interrupts = <0 68 4>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb1_gates 23>, <&spi3_clk>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma 26>, <&dma 26>;
@@ -824,13 +853,14 @@
 			      <0x01c86000 0x2000>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
-			interrupts = <1 9 0xf04>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		rtc: rtc@01f00000 {
 			compatible = "allwinner,sun6i-a31-rtc";
 			reg = <0x01f00000 0x54>;
-			interrupts = <0 40 4>, <0 41 4>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		nmi_intc: interrupt-controller@01f00c0c {
@@ -838,7 +868,7 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			reg = <0x01f00c0c 0x38>;
-			interrupts = <0 32 4>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		prcm@01f01400 {
@@ -878,6 +908,13 @@
 						"apb0_i2c";
 			};
 
+			ir_clk: ir_clk {
+				#clock-cells = <0>;
+				compatible = "allwinner,sun4i-a10-mod0-clk";
+				clocks = <&osc32k>, <&osc24M>;
+				clock-output-names = "ir";
+			};
+
 			apb0_rst: apb0_rst {
 				compatible = "allwinner,sun6i-a31-clock-reset";
 				#reset-cells = <1>;
@@ -889,11 +926,21 @@
 			reg = <0x01f01c00 0x300>;
 		};
 
+		ir: ir@01f02000 {
+			compatible = "allwinner,sun5i-a13-ir";
+			clocks = <&apb0_gates 1>, <&ir_clk>;
+			clock-names = "apb", "ir";
+			resets = <&apb0_rst 1>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01f02000 0x40>;
+			status = "disabled";
+		};
+
 		r_pio: pinctrl@01f02c00 {
 			compatible = "allwinner,sun6i-a31-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
-			interrupts = <0 45 4>,
-				     <0 46 4>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb0_gates 0>;
 			resets = <&apb0_rst 0>;
 			gpio-controller;
@@ -901,6 +948,13 @@
 			#interrupt-cells = <2>;
 			#size-cells = <0>;
 			#gpio-cells = <3>;
+
+			ir_pins_a: ir@0 {
+				allwinner,pins = "PL4";
+				allwinner,function = "s_ir";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
 		};
 	};
 };

arch/arm/boot/dts/sun6i-a31s-cs908.dts

+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "CSQ CS908 top set box";
+	compatible = "csq,cs908", "allwinner,sun6i-a31s";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	usb1_vbus_pin_csq908: usb1_vbus_pin@0 {
+		allwinner,pins = "PC27";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};

arch/arm/boot/dts/sun6i-a31s.dtsi

+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The A31s is the same die as the A31 in a different package, this is
+ * reflected by it having different pinctrl compatible everything else is
+ * identical.
+ */
+
+#include "sun6i-a31.dtsi"
+
+&pio {
+	compatible = "allwinner,sun6i-a31s-pinctrl";
+};

arch/arm/boot/dts/sun7i-a20-bananapi.dts

@@ -48,8 +48,12 @@
  */
 
 /dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "LeMaker Banana Pi";
@@ -67,7 +71,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 10 0>; /* PH10 */
+			cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -102,22 +106,22 @@
 			mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
 				allwinner,pins = "PH10";
 				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			gmac_power_pin_bananapi: gmac_power_pin@0 {
 				allwinner,pins = "PH23";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			led_pins_bananapi: led_pins@0 {
 				allwinner,pins = "PH24";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -154,7 +158,7 @@
 				compatible = "x-powers,axp209";
 				reg = <0x34>;
 				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 
 				interrupt-controller;
 				#interrupt-cells = <1>;
@@ -188,7 +192,7 @@
 
 		green {
 			label = "bananapi:green:usr";
-			gpios = <&pio 7 24 0>;
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -209,6 +213,6 @@
 		regulator-max-microvolt = <3300000>;
 		startup-delay-us = <100000>;
 		enable-active-high;
-		gpio = <&pio 7 23 0>;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
 	};
 };

arch/arm/boot/dts/sun7i-a20-bananapro.dts

+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "LeMaker Banana Pro";
+	compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_bananapro>;
+
+		blue {
+			label = "bananapro:blue:usr";
+			gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "bananapro:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_power_pin_bananapro>;
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vmmc3: vmmc3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc3_pin_bananapro>;
+		regulator-name = "vmmc3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_vmmc3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	gmac_power_pin_bananapro: gmac_power_pin@0 {
+		allwinner,pins = "PH23";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_bananapro: led_pins@0 {
+		allwinner,pins = "PH24", "PG2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_bananapro: mmc0_cd_pin@0 {
+		allwinner,pins = "PH10";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
+		allwinner,pins = "PH0";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
+		allwinner,pins = "PH1";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	vmmc3_pin_bananapro: vmmc3_pin@0 {
+		allwinner,pins = "PH22";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
+	gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	pinctrl-0 = <&usb2_vbus_pin_bananapro>;
+	gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};

arch/arm/boot/dts/sun7i-a20-cubieboard2.dts

@@ -3,17 +3,57 @@
  *
  * Maxime Ripard <maxime.ripard@free-electrons.com>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Cubietech Cubieboard2";
@@ -25,7 +65,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -61,8 +101,8 @@
 			led_pins_cubieboard2: led_pins@0 {
 				allwinner,pins = "PH20", "PH21";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -84,13 +124,9 @@
 			status = "okay";
 
 			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
 				reg = <0x34>;
 				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 			};
 		};
 
@@ -120,12 +156,12 @@
 
 		blue {
 			label = "cubieboard2:blue:usr";
-			gpios = <&pio 7 21 0>;
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
 		};
 
 		green {
 			label = "cubieboard2:green:usr";
-			gpios = <&pio 7 20 0>;
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -141,3 +177,34 @@
 		status = "okay";
 	};
 };
+
+#include "axp209.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};

arch/arm/boot/dts/sun7i-a20-cubietruck.dts

@@ -3,17 +3,57 @@
  *
  * Oliver Schinagl <oliver@schinagl.nl>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Cubietech Cubietruck";
@@ -25,7 +65,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -70,35 +110,35 @@
 		pinctrl@01c20800 {
 			mmc3_pins_a: mmc3@0 {
 				/* AP6210 requires pull-up */
-				allwinner,pull = <1>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			vmmc3_pin_cubietruck: vmmc3_pin@0 {
 				allwinner,pins = "PH9";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
 				allwinner,pins = "PH12";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			led_pins_cubietruck: led_pins@0 {
 				allwinner,pins = "PH7", "PH11", "PH20", "PH21";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			usb0_vbus_pin_a: usb0_vbus_pin@0 {
 				allwinner,pins = "PH17";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -126,13 +166,9 @@
 			status = "okay";
 
 			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
 				reg = <0x34>;
 				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 			};
 		};
 
@@ -168,34 +204,34 @@
 
 		blue {
 			label = "cubietruck:blue:usr";
-			gpios = <&pio 7 21 0>;
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
 		};
 
 		orange {
 			label = "cubietruck:orange:usr";
-			gpios = <&pio 7 20 0>;
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
 
 		white {
 			label = "cubietruck:white:usr";
-			gpios = <&pio 7 11 0>;
+			gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;
 		};
 
 		green {
 			label = "cubietruck:green:usr";
-			gpios = <&pio 7 7 0>;
+			gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
 	reg_ahci_5v: ahci-5v {
 		pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
-		gpio = <&pio 7 12 0>;
+		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 
 	reg_usb0_vbus: usb0-vbus {
 		pinctrl-0 = <&usb0_vbus_pin_a>;
-		gpio = <&pio 7 17 0>;
+		gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 
@@ -215,6 +251,37 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		enable-active-high;
-		gpio = <&pio 7 9 0>;
+		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>;
 	};
 };
+
+#include "axp209.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};

arch/arm/boot/dts/sun7i-a20-hummingbird.dts

@@ -12,8 +12,12 @@
  */
 
 /dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Merrii A20 Hummingbird";
@@ -25,7 +29,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 			vmmc-supply = <&reg_vcc3v0>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -70,29 +74,29 @@
 			ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 {
 				allwinner,pins = "PH15";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 {
 				allwinner,pins = "PH2";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 {
 				allwinner,pins = "PH9";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 {
 				allwinner,pins = "PH16";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -147,7 +151,7 @@
 				compatible = "x-powers,axp209";
 				reg = <0x34>;
 				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 			};
@@ -184,7 +188,7 @@
 			phy-mode = "rgmii";
 			phy-supply = <&reg_gmac_vdd>;
 			/* phy reset config */
-			snps,reset-gpio = <&pio 0 17 0>; /* PA17 */
+			snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
 			snps,reset-active-low;
 			/* wait 1s after reset, otherwise fail to read phy id */
 			snps,reset-delays-us = <0 10000 1000000>;
@@ -198,13 +202,13 @@
 
 	reg_ahci_5v: ahci-5v {
 		pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>;
-		gpio = <&pio 7 15 0>; /* PH15 */
+		gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
 		status = "okay";
 	};
 
 	reg_usb1_vbus: usb1-vbus {
 		pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>;
-		gpio = <&pio 7 2 0>; /* PH2 */
+		gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
 		status = "okay";
 	};
 
@@ -220,7 +224,7 @@
 		regulator-min-microvolt = <3000000>;
 		regulator-max-microvolt = <3000000>;
 		enable-active-high;
-		gpio = <&pio 7 9 0>; /* PH9 */
+		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
 	};
 
 	reg_gmac_vdd: gmac_vdd {
@@ -231,6 +235,6 @@
 		regulator-min-microvolt = <3000000>;
 		regulator-max-microvolt = <3000000>;
 		enable-active-high;
-		gpio = <&pio 7 16 0>; /* PH16 */
+		gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */
 	};
 };

arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts

@@ -46,8 +46,12 @@
  */
 
 /dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "I12 / Q5 / QT840A A20 tvbox";
@@ -59,7 +63,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -98,35 +102,35 @@
 		pinctrl@01c20800 {
 			mmc3_pins_a: mmc3@0 {
 				/* AP6210 / AP6330 requires pull-up */
-				allwinner,pull = <1>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
 				allwinner,pins = "PH2";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
 				allwinner,pins = "PH12";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
 				allwinner,pins = "PH21";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			led_pins_i12_tvbox: led_pins@0 {
 				allwinner,pins = "PH9", "PH20";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -151,7 +155,7 @@
 				compatible = "x-powers,axp209";
 				reg = <0x34>;
 				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 
 				interrupt-controller;
 				#interrupt-cells = <1>;
@@ -179,12 +183,12 @@
 
 		red {
 			label = "i12_tvbox:red:usr";
-			gpios = <&pio 7 9 1>;
+			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
 		};
 
 		blue {
 			label = "i12_tvbox:blue:usr";
-			gpios = <&pio 7 20 0>;
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -204,7 +208,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		enable-active-high;
-		gpio = <&pio 7 2 0>;
+		gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 	};
 
 	reg_vmmc3_io: vmmc3-io {
@@ -217,7 +221,7 @@
 		/* This controls VCC-PI, must be always on! */
 		regulator-always-on;
 		enable-active-high;
-		gpio = <&pio 7 12 0>;
+		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
 	};
 
 	reg_gmac_3v3: gmac-3v3 {
@@ -229,6 +233,6 @@
 		regulator-max-microvolt = <3300000>;
 		startup-delay-us = <50000>;
 		enable-active-high;
-		gpio = <&pio 7 21 0>;
+		gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>;
 	};
 };

arch/arm/boot/dts/sun7i-a20-m3.dts

@@ -48,8 +48,12 @@
  */
 
 /dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Mele M3";
@@ -61,7 +65,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -101,8 +105,8 @@
 			led_pins_m3: led_pins@0 {
 				allwinner,pins = "PH20";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -127,7 +131,7 @@
 				compatible = "x-powers,axp209";
 				reg = <0x34>;
 				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 
 				interrupt-controller;
 				#interrupt-cells = <1>;
@@ -154,7 +158,7 @@
 
 		blue {
 			label = "m3:blue:usr";
-			gpios = <&pio 7 20 0>;
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
 	};
 

arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts

@@ -49,8 +49,12 @@
  */
 
 /dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Olimex A20-OLinuXino-LIME";
@@ -62,7 +66,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -98,15 +102,15 @@
 			ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
 				allwinner,pins = "PC3";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			led_pins_olinuxinolime: led_pins@0 {
 				allwinner,pins = "PH2";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -125,7 +129,7 @@
 				compatible = "x-powers,axp209";
 				reg = <0x34>;
 				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 
 				interrupt-controller;
 				#interrupt-cells = <1>;
@@ -152,14 +156,14 @@
 
 		green {
 			label = "a20-olinuxino-lime:green:usr";
-			gpios = <&pio 7 2 0>;
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
 	reg_ahci_5v: ahci-5v {
 		pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
-		gpio = <&pio 2 3 0>;
+		gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 

arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts

@@ -46,8 +46,12 @@
  */
 
 /dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Olimex A20-OLinuXino-LIME2";
@@ -59,7 +63,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -95,15 +99,15 @@
 			ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
 				allwinner,pins = "PC3";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			led_pins_olinuxinolime: led_pins@0 {
 				allwinner,pins = "PH2";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -122,7 +126,7 @@
 				compatible = "x-powers,axp209";
 				reg = <0x34>;
 				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 
 				interrupt-controller;
 				#interrupt-cells = <1>;
@@ -199,14 +203,14 @@
 
 		green {
 			label = "a20-olinuxino-lime2:green:usr";
-			gpios = <&pio 7 2 0>;
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
 	reg_ahci_5v: ahci-5v {
 		pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
-		gpio = <&pio 2 3 0>;
+		gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 

arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts

@@ -12,8 +12,13 @@
  */
 
 /dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Olimex A20-Olinuxino Micro";
@@ -36,7 +41,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -46,7 +51,7 @@
 			pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 11 0>; /* PH11 */
+			cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -88,15 +93,69 @@
 			mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
 				allwinner,pins = "PH11";
 				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			led_pins_olinuxino: led_pins@0 {
 				allwinner,pins = "PH2";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		lradc: lradc@01c22800 {
+			vref-supply = <&reg_vcc3v0>;
+			status = "okay";
+
+			button@191 {
+				label = "Volume Up";
+				linux,code = <KEY_VOLUMEUP>;
+				channel = <0>;
+				voltage = <191274>;
+			};
+
+			button@392 {
+				label = "Volume Down";
+				linux,code = <KEY_VOLUMEDOWN>;
+				channel = <0>;
+				voltage = <392644>;
+			};
+
+			button@601 {
+				label = "Menu";
+				linux,code = <KEY_MENU>;
+				channel = <0>;
+				voltage = <601151>;
+			};
+
+			button@795 {
+				label = "Search";
+				linux,code = <KEY_SEARCH>;
+				channel = <0>;
+				voltage = <795090>;
+			};
+
+			button@987 {
+				label = "Home";
+				linux,code = <KEY_HOMEPAGE>;
+				channel = <0>;
+				voltage = <987387>;
+			};
+
+			button@1184 {
+				label = "Esc";
+				linux,code = <KEY_ESC>;
+				channel = <0>;
+				voltage = <1184678>;
+			};
+
+			button@1398 {
+				label = "Enter";
+				linux,code = <KEY_ENTER>;
+				channel = <0>;
+				voltage = <1398804>;
 			};
 		};
 
@@ -127,7 +186,7 @@
 				compatible = "x-powers,axp209";
 				reg = <0x34>;
 				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 
 				interrupt-controller;
 				#interrupt-cells = <1>;
@@ -166,7 +225,7 @@
 
 		green {
 			label = "a20-olinuxino-micro:green:usr";
-			gpios = <&pio 7 2 0>;
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};

arch/arm/boot/dts/sun7i-a20-pcduino3.dts

@@ -47,10 +47,13 @@
  */
 
 /dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "LinkSprite pcDuino3";
@@ -62,7 +65,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -102,15 +105,15 @@
 			led_pins_pcduino3: led_pins@0 {
 				allwinner,pins = "PH15", "PH16";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			key_pins_pcduino3: key_pins@0 {
 				allwinner,pins = "PH17", "PH18", "PH19";
 				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -135,7 +138,7 @@
 				compatible = "x-powers,axp209";
 				reg = <0x34>;
 				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 
 				interrupt-controller;
 				#interrupt-cells = <1>;
@@ -203,7 +206,7 @@
 	};
 
 	reg_ahci_5v: ahci-5v {
-		gpio = <&pio 7 2 0>;
+		gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 };

arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts

+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The Ippo Q8H v1.2 is almost identical to the v5, still it needs a separate
+ * dtb file since some gpio-s surrounding the wlan/bluetooth are different,
+ * and it uses different camera sensors.
+ */
+
+#include "sun8i-a23-ippo-q8h-v5.dts"
+
+/ {
+	model = "Ippo Q8H Dual Core Tablet (v1.2)";
+	compatible = "ippo,q8h-v1.2", "allwinner,sun8i-a23";
+};

arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts

@@ -48,13 +48,21 @@
  */
 
 /dts-v1/;
-/include/ "sun8i-a23.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun8i-a23.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Ippo Q8H Dual Core Tablet (v5)";
 	compatible = "ippo,q8h-v5", "allwinner,sun8i-a23";
 
+	aliases {
+		serial0 = &r_uart;
+	};
+
 	chosen {
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};
@@ -65,7 +73,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
 			vmmc-supply = <&reg_vcc3v0>;
 			bus-width = <4>;
-			cd-gpios = <&pio 1 4 0>; /* PB4 */
+			cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -74,8 +82,27 @@
 			mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
 				allwinner,pins = "PB4";
 				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+		};
+
+		lradc: lradc@01c22800 {
+			vref-supply = <&reg_vcc3v0>;
+			status = "okay";
+
+			button@200 {
+				label = "Volume Up";
+				linux,code = <KEY_VOLUMEUP>;
+				channel = <0>;
+				voltage = <200000>;
+			};
+
+			button@400 {
+				label = "Volume Down";
+				linux,code = <KEY_VOLUMEDOWN>;
+				channel = <0>;
+				voltage = <400000>;
 			};
 		};
 

arch/arm/boot/dts/sun9i-a80-optimus.dts

@@ -48,7 +48,11 @@
  */
 
 /dts-v1/;
-/include/ "sun9i-a80.dtsi"
+#include "sun9i-a80.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Merrii A80 Optimus Board";
@@ -58,62 +62,86 @@
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};
 
-	soc {
-		pio: pinctrl@06000800 {
-			i2c3_pins_a: i2c3@0 {
-				/* Enable internal pull-up */
-				allwinner,pull = <1>;
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_optimus>;
+
+		/* The LED names match those found on the board */
+
+		led2 {
+			label = "optimus:led2:usr";
+			gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* led3 is on PM15, in R_PIO */
+
+		led4 {
+			label = "optimus:led4:usr";
+			gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>;
 		};
+	};
+};
 
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins_a>;
+	status = "okay";
+};
+
+&i2c3_pins_a {
+	/* Enable internal pull-up */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&pio {
 	led_pins_optimus: led-pins@0 {
 		allwinner,pins = "PH0", "PH1";
 		allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-			uart4_pins_a: uart4@0 {
-				/* Enable internal pull-up */
-				allwinner,pull = <1>;
-			};
+	mmc0_cd_pin_optimus: mmc0_cd_pin@0 {
+		allwinner,pins = "PH18";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
+};
 
-		uart0: serial@07000000 {
+&mmc0 {
 	pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */
+	cd-inverted;
 	status = "okay";
-		};
+};
 
-		uart4: serial@07001000 {
+&mmc2 {
 	pinctrl-names = "default";
-			pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <8>;
+	non-removable;
 	status = "okay";
-		};
+};
 
-		i2c3: i2c@07003400 {
+&uart0 {
 	pinctrl-names = "default";
-			pinctrl-0 = <&i2c3_pins_a>;
+	pinctrl-0 = <&uart0_pins_a>;
 	status = "okay";
-		};
-	};
+};
 
-	leds {
-		compatible = "gpio-leds";
+&uart4 {
 	pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_optimus>;
-
-		/* The LED names match those found on the board */
-
-		led2 {
-			label = "optimus:led2:usr";
-			gpios = <&pio 7 1 0>;
-		};
-
-		/* led3 is on PM15, in R_PIO */
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
 
-		led4 {
-			label = "optimus:led4:usr";
-			gpios = <&pio 7 0 0>;
-		};
-	};
+&uart4_pins_a {
+	/* Enable internal pull-up */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };