can: move SPI drivers into a separate directory

Create a directory for all CAN drivers using SPI and move mcp251x driver there.
Signed-off-by: NStefano Babic <sbabic@denx.de>
Acked-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/Kconfig

@@ -77,12 +77,6 @@ config CAN_TI_HECC
 	  Driver for TI HECC (High End CAN Controller) module found on many
 	  TI devices. The device specifications are available from www.ti.com
 
-config CAN_MCP251X
-	tristate "Microchip MCP251x SPI CAN controllers"
-	depends on SPI && HAS_DMA
-	---help---
-	  Driver for the Microchip MCP251x SPI CAN controllers.
-
 config CAN_BFIN
 	depends on BF534 || BF536 || BF537 || BF538 || BF539 || BF54x
 	tristate "Analog Devices Blackfin on-chip CAN"
@@ -133,6 +127,8 @@ source "drivers/net/can/c_can/Kconfig"
 
 source "drivers/net/can/cc770/Kconfig"
 
+source "drivers/net/can/spi/Kconfig"
+
 source "drivers/net/can/usb/Kconfig"
 
 source "drivers/net/can/softing/Kconfig"

drivers/net/can/Makefile

@@ -10,6 +10,7 @@ can-dev-y			:= dev.o
 
 can-dev-$(CONFIG_CAN_LEDS)	+= led.o
 
+obj-y				+= spi/
 obj-y				+= usb/
 obj-y				+= softing/
 
@@ -19,7 +20,6 @@ obj-$(CONFIG_CAN_C_CAN)		+= c_can/
 obj-$(CONFIG_CAN_CC770)		+= cc770/
 obj-$(CONFIG_CAN_AT91)		+= at91_can.o
 obj-$(CONFIG_CAN_TI_HECC)	+= ti_hecc.o
-obj-$(CONFIG_CAN_MCP251X)	+= mcp251x.o
 obj-$(CONFIG_CAN_BFIN)		+= bfin_can.o
 obj-$(CONFIG_CAN_JANZ_ICAN3)	+= janz-ican3.o
 obj-$(CONFIG_CAN_FLEXCAN)	+= flexcan.o

drivers/net/can/spi/Kconfig

+menu "CAN SPI interfaces"
+	depends on SPI
+
+config CAN_MCP251X
+	tristate "Microchip MCP251x SPI CAN controllers"
+	depends on HAS_DMA
+	---help---
+	  Driver for the Microchip MCP251x SPI CAN controllers.
+
+endmenu

drivers/net/can/spi/Makefile

+#
+#  Makefile for the Linux Controller Area Network SPI drivers.
+#
+
+
+obj-$(CONFIG_CAN_MCP251X)	+= mcp251x.o
+
+ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG