Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 4 年多

通知 15
Star 8
Fork 2
K
kernel_linux
提交 800df1a5 编写于 作者: E Ebru Akagunduz 提交者： Greg Kroah-Hartman
浏览文件
操作

Staging: rtl8187se: fix line over 80 characters in r8185b_init.c 

Fix checkpatch.pl issues with line over 80 characters
in r8185b_init.c, Italian to English translated added
Signed-off-by: NEbru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 0fed188f
隐藏空白更改
内联 并排
Showing with 264 addition and 137 deletion
drivers/staging/rtl8187se/r8185b_init.c
浏览文件 @ 800df1a5
...@@ -30,10 +30,13 @@ ...@@ -30,10 +30,13 @@
#define TC_3W_POLL_MAX_TRY_CNT 5 #define TC_3W_POLL_MAX_TRY_CNT 5
static u8 MAC_REG_TABLE[][2] = { static u8 MAC_REG_TABLE[][2] = {
/*PAGA 0: */ /*
/* 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in HwConfigureRTL8185() */ * PAGE 0:
/* 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in InitializeAdapter8185(). */ * 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in
/* 0x1F0~0x1F8 set in MacConfig_85BASIC() */ * HwConfigureRTL8185()
* 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in InitializeAdapter8185().
* 0x1F0~0x1F8 set in MacConfig_85BASIC()
*/
{0x08, 0xae}, {0x0a, 0x72}, {0x5b, 0x42}, {0x08, 0xae}, {0x0a, 0x72}, {0x5b, 0x42},
{0x84, 0x88}, {0x85, 0x24}, {0x88, 0x54}, {0x8b, 0xb8}, {0x8c, 0x03}, {0x84, 0x88}, {0x85, 0x24}, {0x88, 0x54}, {0x8b, 0xb8}, {0x8c, 0x03},
{0x8d, 0x40}, {0x8e, 0x00}, {0x8f, 0x00}, {0x5b, 0x18}, {0x91, 0x03}, {0x8d, 0x40}, {0x8e, 0x00}, {0x8f, 0x00}, {0x5b, 0x18}, {0x91, 0x03},
...@@ -44,15 +47,20 @@ static u8 MAC_REG_TABLE[][2] = { ...@@ -44,15 +47,20 @@ static u8 MAC_REG_TABLE[][2] = {
{0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96}, {0xfd, 0xa4}, {0xfe, 0x00}, {0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96}, {0xfd, 0xa4}, {0xfe, 0x00},
{0xff, 0x00}, {0xff, 0x00},
/*PAGE 1: */ /*
/* For Flextronics system Logo PCIHCT failure: */ * PAGE 1:
/* 0x1C4~0x1CD set no-zero value to avoid PCI configuration space 0x45[7]=1 */ * For Flextronics system Logo PCIHCT failure:
* 0x1C4~0x1CD set no-zero value to avoid PCI configuration
* space 0x45[7]=1
*/
{0x5e, 0x01}, {0x5e, 0x01},
{0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x04}, {0x5b, 0x00}, {0x60, 0x24}, {0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x04}, {0x5b, 0x00}, {0x60, 0x24},
{0x61, 0x97}, {0x62, 0xF0}, {0x63, 0x09}, {0x80, 0x0F}, {0x81, 0xFF}, {0x61, 0x97}, {0x62, 0xF0}, {0x63, 0x09}, {0x80, 0x0F}, {0x81, 0xFF},
{0x82, 0xFF}, {0x83, 0x03}, {0x82, 0xFF}, {0x83, 0x03},
{0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8, 0x22}, /* lzm add 080826 */ /* lzm add 080826 */
{0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD, 0x22}, /* lzm add 080826 */ {0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8, 0x22},
/* lzm add 080826 */
{0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD, 0x22},
{0xe2, 0x00}, {0xe2, 0x00},
...@@ -66,21 +74,24 @@ static u8 MAC_REG_TABLE[][2] = { ...@@ -66,21 +74,24 @@ static u8 MAC_REG_TABLE[][2] = {
{0x8f, 0x3f}, {0xc4, 0xff}, {0xc5, 0xff}, {0xc6, 0xff}, {0xc7, 0xff}, {0x8f, 0x3f}, {0xc4, 0xff}, {0xc5, 0xff}, {0xc6, 0xff}, {0xc7, 0xff},
{0xc8, 0x00}, {0xc9, 0x00}, {0xca, 0x80}, {0xcb, 0x00}, {0xc8, 0x00}, {0xc9, 0x00}, {0xca, 0x80}, {0xcb, 0x00},
/* PAGA 0: */ /* PAGE 0: */
{0x5e, 0x00}, {0x9f, 0x03} {0x5e, 0x00}, {0x9f, 0x03}
}; };
static u8 ZEBRA_AGC[] = { static u8 ZEBRA_AGC[] = {
0, 0,
0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72, 0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77, 0x76,
0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62, 0x75, 0x74, 0x73, 0x72, 0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A,
0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07, 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62, 0x48, 0x47, 0x46, 0x45,
0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x44, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07,
0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16, 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24, 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16, 0x17, 0x17, 0x18, 0x18,
0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F 0x19, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e,
0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x22, 0x22,
0x22, 0x23, 0x23, 0x24, 0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27,
0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F
}; };
static u32 ZEBRA_RF_RX_GAIN_TABLE[] = { static u32 ZEBRA_RF_RX_GAIN_TABLE[] = {
...@@ -123,13 +134,21 @@ static u8 PlatformIORead1Byte(struct net_device *dev, u32 offset) ...@@ -123,13 +134,21 @@ static u8 PlatformIORead1Byte(struct net_device *dev, u32 offset)
static void PlatformIOWrite1Byte(struct net_device *dev, u32 offset, u8 data) static void PlatformIOWrite1Byte(struct net_device *dev, u32 offset, u8 data)
{ {
write_nic_byte(dev, offset, data); write_nic_byte(dev, offset, data);
read_nic_byte(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */ /*
* To make sure write operation is completed,
* 2005.11.09, by rcnjko.
*/
read_nic_byte(dev, offset);
} }
static void PlatformIOWrite2Byte(struct net_device *dev, u32 offset, u16 data) static void PlatformIOWrite2Byte(struct net_device *dev, u32 offset, u16 data)
{ {
write_nic_word(dev, offset, data); write_nic_word(dev, offset, data);
read_nic_word(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */ /*
* To make sure write operation is completed,
* 2005.11.09, by rcnjko.
*/
read_nic_word(dev, offset);
} }
static void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data) static void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data)
...@@ -146,9 +165,10 @@ static void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data) ...@@ -146,9 +165,10 @@ static void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data)
/* /*
* 071010, rcnjko: * 071010, rcnjko:
* The critical section is only BB read/write race condition. * The critical section is only BB read/write race
* Assumption: * condition. Assumption:
* 1. We assume NO one will access BB at DIRQL, otherwise, system will crash for * 1. We assume NO one will access BB at DIRQL, otherwise,
* system will crash for
* acquiring the spinlock in such context. * acquiring the spinlock in such context.
* 2. PlatformIOWrite4Byte() MUST NOT be recursive. * 2. PlatformIOWrite4Byte() MUST NOT be recursive.
*/ */
...@@ -164,14 +184,19 @@ static void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data) ...@@ -164,14 +184,19 @@ static void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data)
} }
for (idx = 0; idx < 3; idx++) for (idx = 0; idx < 3; idx++)
PlatformIOWrite1Byte(dev, offset+1+idx, ((u8 *)&dataBytes)[idx]); PlatformIOWrite1Byte(dev, offset+1+idx,
((u8 *)&dataBytes)[idx]);
write_nic_byte(dev, offset, cmdByte); write_nic_byte(dev, offset, cmdByte);
/* NdisReleaseSpinLock( &(pDevice->IoSpinLock) ); */ /* NdisReleaseSpinLock( &(pDevice->IoSpinLock) ); */
} else { } else {
write_nic_dword(dev, offset, data); write_nic_dword(dev, offset, data);
read_nic_dword(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */ /*
* To make sure write operation is completed, 2005.11.09,
* by rcnjko.
*/
read_nic_dword(dev, offset);
} }
} }
...@@ -284,9 +309,13 @@ bool SetAntennaConfig87SE(struct net_device *dev, ...@@ -284,9 +309,13 @@ bool SetAntennaConfig87SE(struct net_device *dev,
{ {
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
bool bAntennaSwitched = true; bool bAntennaSwitched = true;
u8 ant_diversity_offset = 0x00; /* 0x00 = disabled, 0x80 = enabled */ /* 0x00 = disabled, 0x80 = enabled */
u8 ant_diversity_offset = 0x00;
/* printk("SetAntennaConfig87SE(): DefaultAnt(%d), bAntDiversity(%d)\n", DefaultAnt, bAntDiversity); */ /*
* printk("SetAntennaConfig87SE(): DefaultAnt(%d), bAntDiversity(%d)\n",
* DefaultAnt, bAntDiversity);
*/
/* Threshold for antenna diversity. */ /* Threshold for antenna diversity. */
write_phy_cck(dev, 0x0c, 0x09); /* Reg0c : 09 */ write_phy_cck(dev, 0x0c, 0x09); /* Reg0c : 09 */
...@@ -300,22 +329,27 @@ bool SetAntennaConfig87SE(struct net_device *dev, ...@@ -300,22 +329,27 @@ bool SetAntennaConfig87SE(struct net_device *dev,
/* Config CCK RX antenna. */ /* Config CCK RX antenna. */
write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */ write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */
write_phy_cck(dev, 0x01, 0x47|ant_diversity_offset); /* Reg01 : 47 | ant_diversity_offset */
/* Reg01 : 47 | ant_diversity_offset */
write_phy_cck(dev, 0x01, 0x47|ant_diversity_offset);
/* Config OFDM RX antenna. */ /* Config OFDM RX antenna. */
write_phy_ofdm(dev, 0x0D, 0x54); /* Reg0d : 54 */ write_phy_ofdm(dev, 0x0D, 0x54); /* Reg0d : 54 */
write_phy_ofdm(dev, 0x18, 0x32|ant_diversity_offset); /* Reg18 : 32 */ /* Reg18 : 32 */
write_phy_ofdm(dev, 0x18, 0x32|ant_diversity_offset);
} else { /* main Antenna */ } else { /* main Antenna */
/* Mac register, main antenna */ /* Mac register, main antenna */
write_nic_byte(dev, ANTSEL, 0x03); write_nic_byte(dev, ANTSEL, 0x03);
/* Config CCK RX antenna. */ /* Config CCK RX antenna. */
write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */ write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */
write_phy_cck(dev, 0x01, 0x47|ant_diversity_offset); /* Reg01 : 47 */ /* Reg01 : 47 */
write_phy_cck(dev, 0x01, 0x47|ant_diversity_offset);
/* Config OFDM RX antenna. */ /* Config OFDM RX antenna. */
write_phy_ofdm(dev, 0x0D, 0x5c); /* Reg0d : 5c */ write_phy_ofdm(dev, 0x0D, 0x5c); /* Reg0d : 5c */
write_phy_ofdm(dev, 0x18, 0x32|ant_diversity_offset); /*Reg18 : 32 */ /*Reg18 : 32 */
write_phy_ofdm(dev, 0x18, 0x32|ant_diversity_offset);
} }
priv->CurrAntennaIndex = DefaultAnt; /* Update default settings. */ priv->CurrAntennaIndex = DefaultAnt; /* Update default settings. */
return bAntennaSwitched; return bAntennaSwitched;
...@@ -382,18 +416,23 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev) ...@@ -382,18 +416,23 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
RF_WriteReg(dev, 0x05, 0x059b); mdelay(1); RF_WriteReg(dev, 0x05, 0x059b); mdelay(1);
RF_WriteReg(dev, 0x06, 0x0081); mdelay(1); RF_WriteReg(dev, 0x06, 0x0081); mdelay(1);
RF_WriteReg(dev, 0x07, 0x01A0); mdelay(1); RF_WriteReg(dev, 0x07, 0x01A0); mdelay(1);
/* Don't write RF23/RF24 to make a difference between 87S C cut and D cut. asked by SD3 stevenl. */ /*
* Don't write RF23/RF24 to make a difference between 87S C cut and D cut.
* asked by SD3 stevenl.
*/
RF_WriteReg(dev, 0x0a, 0x0001); mdelay(1); RF_WriteReg(dev, 0x0a, 0x0001); mdelay(1);
RF_WriteReg(dev, 0x0b, 0x0418); mdelay(1); RF_WriteReg(dev, 0x0b, 0x0418); mdelay(1);
if (d_cut) { if (d_cut) {
RF_WriteReg(dev, 0x0c, 0x0fbe); mdelay(1); RF_WriteReg(dev, 0x0c, 0x0fbe); mdelay(1);
RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1);
RF_WriteReg(dev, 0x0e, 0x0807); mdelay(1); /* RX LO buffer */ /* RX LO buffer */
RF_WriteReg(dev, 0x0e, 0x0807); mdelay(1);
} else { } else {
RF_WriteReg(dev, 0x0c, 0x0fbe); mdelay(1); RF_WriteReg(dev, 0x0c, 0x0fbe); mdelay(1);
RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1);
RF_WriteReg(dev, 0x0e, 0x0806); mdelay(1); /* RX LO buffer */ /* RX LO buffer */
RF_WriteReg(dev, 0x0e, 0x0806); mdelay(1);
} }
RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1); RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1);
...@@ -408,19 +447,24 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev) ...@@ -408,19 +447,24 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
RF_WriteReg(dev, 0x05, 0x0203); mdelay(1); /* 203, 343 */ RF_WriteReg(dev, 0x05, 0x0203); mdelay(1); /* 203, 343 */
RF_WriteReg(dev, 0x06, 0x0200); mdelay(1); /* 400 */ RF_WriteReg(dev, 0x06, 0x0200); mdelay(1); /* 400 */
RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); /* switch to reg16-reg30, and HSSI disable 137 */ /* switch to reg16-reg30, and HSSI disable 137 */
RF_WriteReg(dev, 0x00, 0x0137); mdelay(1);
mdelay(10); /* Deay 10 ms. */ /* 0xfd */ mdelay(10); /* Deay 10 ms. */ /* 0xfd */
RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); /* Z4 synthesizer loop filter setting, 392 */ /* Z4 synthesizer loop filter setting, 392 */
RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1);
mdelay(10); /* Deay 10 ms. */ /* 0xfd */ mdelay(10); /* Deay 10 ms. */ /* 0xfd */
RF_WriteReg(dev, 0x00, 0x0037); mdelay(1); /* switch to reg0-reg15, and HSSI disable */ /* switch to reg0-reg15, and HSSI disable */
RF_WriteReg(dev, 0x00, 0x0037); mdelay(1);
mdelay(10); /* Deay 10 ms. */ /* 0xfd */ mdelay(10); /* Deay 10 ms. */ /* 0xfd */
RF_WriteReg(dev, 0x04, 0x0160); mdelay(1); /* CBC on, Tx Rx disable, High gain */ /* CBC on, Tx Rx disable, High gain */
RF_WriteReg(dev, 0x04, 0x0160); mdelay(1);
mdelay(10); /* Deay 10 ms. */ /* 0xfd */ mdelay(10); /* Deay 10 ms. */ /* 0xfd */
RF_WriteReg(dev, 0x07, 0x0080); mdelay(1); /* Z4 setted channel 1 */ /* Z4 setted channel 1 */
RF_WriteReg(dev, 0x07, 0x0080); mdelay(1);
mdelay(10); /* Deay 10 ms. */ /* 0xfd */ mdelay(10); /* Deay 10 ms. */ /* 0xfd */
RF_WriteReg(dev, 0x02, 0x088D); mdelay(1); /* LC calibration */ RF_WriteReg(dev, 0x02, 0x088D); mdelay(1); /* LC calibration */
...@@ -428,7 +472,8 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev) ...@@ -428,7 +472,8 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
mdelay(10); /* Deay 10 ms. */ /* 0xfd */ mdelay(10); /* Deay 10 ms. */ /* 0xfd */
mdelay(10); /* Deay 10 ms. */ /* 0xfd */ mdelay(10); /* Deay 10 ms. */ /* 0xfd */
RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); /* switch to reg16-reg30 137, and HSSI disable 137 */ /* switch to reg16-reg30 137, and HSSI disable 137 */
RF_WriteReg(dev, 0x00, 0x0137); mdelay(1);
mdelay(10); /* Deay 10 ms. */ /* 0xfd */ mdelay(10); /* Deay 10 ms. */ /* 0xfd */
RF_WriteReg(dev, 0x07, 0x0000); mdelay(1); RF_WriteReg(dev, 0x07, 0x0000); mdelay(1);
...@@ -444,44 +489,56 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev) ...@@ -444,44 +489,56 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
/* /*
* enable crystal calibration. * enable crystal calibration.
* RF Reg[30], (1)Xin:[12:9], Xout:[8:5], addr[4:0]. * RF Reg[30], (1)Xin:[12:9], Xout:[8:5], addr[4:0].
* (2)PA Pwr delay timer[15:14], default: 2.4us, set BIT15=0 * (2)PA Pwr delay timer[15:14], default: 2.4us,
* (3)RF signal on/off when calibration[13], default: on, set BIT13=0. * set BIT15=0
* (3)RF signal on/off when calibration[13], default: on,
* set BIT13=0.
* So we should minus 4 BITs offset. * So we should minus 4 BITs offset.
*/ */
RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9); mdelay(1); RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) |
(priv->XtalCal_Xout<<1) | BIT11 | BIT9); mdelay(1);
printk("ZEBRA_Config_85BASIC_HardCode(): (%02x)\n", printk("ZEBRA_Config_85BASIC_HardCode(): (%02x)\n",
(priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9); (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) |
BIT11 | BIT9);
} else { } else {
/* using default value. Xin=6, Xout=6. */ /* using default value. Xin=6, Xout=6. */
RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1); RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1);
} }
/* switch to reg0-reg15, and HSSI enable */
RF_WriteReg(dev, 0x00, 0x00bf); mdelay(1); /* switch to reg0-reg15, and HSSI enable */ RF_WriteReg(dev, 0x00, 0x00bf); mdelay(1);
RF_WriteReg(dev, 0x0d, 0x08df); mdelay(1); /* Rx BB start calibration, 00c//+edward */ /* Rx BB start calibration, 00c//+edward */
RF_WriteReg(dev, 0x02, 0x004d); mdelay(1); /* temperature meter off */ RF_WriteReg(dev, 0x0d, 0x08df); mdelay(1);
/* temperature meter off */
RF_WriteReg(dev, 0x02, 0x004d); mdelay(1);
RF_WriteReg(dev, 0x04, 0x0975); mdelay(1); /* Rx mode */ RF_WriteReg(dev, 0x04, 0x0975); mdelay(1); /* Rx mode */
mdelay(10); /* Deay 10 ms.*/ /* 0xfe */ mdelay(10); /* Deay 10 ms.*/ /* 0xfe */
mdelay(10); /* Deay 10 ms.*/ /* 0xfe */ mdelay(10); /* Deay 10 ms.*/ /* 0xfe */
mdelay(10); /* Deay 10 ms.*/ /* 0xfe */ mdelay(10); /* Deay 10 ms.*/ /* 0xfe */
RF_WriteReg(dev, 0x00, 0x0197); mdelay(1); /* Rx mode*/ /*+edward */ /* Rx mode*/ /*+edward */
RF_WriteReg(dev, 0x05, 0x05ab); mdelay(1); /* Rx mode*/ /*+edward */ RF_WriteReg(dev, 0x00, 0x0197); mdelay(1);
RF_WriteReg(dev, 0x00, 0x009f); mdelay(1); /* Rx mode*/ /*+edward */ /* Rx mode*/ /*+edward */
RF_WriteReg(dev, 0x01, 0x0000); mdelay(1); /* Rx mode*/ /*+edward */ RF_WriteReg(dev, 0x05, 0x05ab); mdelay(1);
RF_WriteReg(dev, 0x02, 0x0000); mdelay(1); /* Rx mode*/ /*+edward */ /* Rx mode*/ /*+edward */
RF_WriteReg(dev, 0x00, 0x009f); mdelay(1);
/* Rx mode*/ /*+edward */
RF_WriteReg(dev, 0x01, 0x0000); mdelay(1);
/* Rx mode*/ /*+edward */
RF_WriteReg(dev, 0x02, 0x0000); mdelay(1);
/* power save parameters. */ /* power save parameters. */
u1b24E = read_nic_byte(dev, 0x24E); u1b24E = read_nic_byte(dev, 0x24E);
write_nic_byte(dev, 0x24E, (u1b24E & (~(BIT5|BIT6)))); write_nic_byte(dev, 0x24E, (u1b24E & (~(BIT5|BIT6))));
/*============================================================================= /*======================================================================
* *
*=========================================================================== *======================================================================
* CCKCONF.TXT * CCKCONF.TXT
*=========================================================================== *======================================================================
* *
* [POWER SAVE] Power Saving Parameters by jong. 2007-11-27 * [POWER SAVE] Power Saving Parameters by jong. 2007-11-27
* CCK reg0x00[7]=1'b1 :power saving for TX (default) * CCK reg0x00[7]=1'b1 :power saving for TX (default)
* CCK reg0x00[6]=1'b1: power saving for RX (default) * CCK reg0x00[6]=1'b1: power saving for RX (default)
* CCK reg0x06[4]=1'b1: turn off channel estimation related circuits if not doing channel estimation. * CCK reg0x06[4]=1'b1: turn off channel estimation related
* circuits if not doing channel estimation.
* CCK reg0x06[3]=1'b1: turn off unused circuits before cca = 1 * CCK reg0x06[3]=1'b1: turn off unused circuits before cca = 1
* CCK reg0x06[2]=1'b1: turn off cck's circuit if macrst =0 * CCK reg0x06[2]=1'b1: turn off cck's circuit if macrst =0
*/ */
...@@ -501,9 +558,9 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev) ...@@ -501,9 +558,9 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
/* /*
*=========================================================================== *======================================================================
* AGC.txt * AGC.txt
*=========================================================================== *======================================================================
*/ */
write_phy_ofdm(dev, 0x00, 0x12); write_phy_ofdm(dev, 0x00, 0x12);
...@@ -526,11 +583,11 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev) ...@@ -526,11 +583,11 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
PlatformIOWrite4Byte(dev, PhyAddr, 0x00001080); /* Annie, 2006-05-05 */ PlatformIOWrite4Byte(dev, PhyAddr, 0x00001080); /* Annie, 2006-05-05 */
/* /*
*=========================================================================== *======================================================================
* *
*=========================================================================== *======================================================================
* OFDMCONF.TXT * OFDMCONF.TXT
*=========================================================================== *======================================================================
*/ */
for (i = 0; i < 60; i++) { for (i = 0; i < 60; i++) {
...@@ -544,12 +601,16 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev) ...@@ -544,12 +601,16 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
} }
/* /*
*=========================================================================== *======================================================================
* by amy for antenna * by amy for antenna
*=========================================================================== *======================================================================
*/
/*
* Config Sw/Hw Combinational Antenna Diversity. Added by Roger,
* 2008.02.26.
*/ */
/* Config Sw/Hw Combinational Antenna Diversity. Added by Roger, 2008.02.26. */ SetAntennaConfig87SE(dev, priv->bDefaultAntenna1,
SetAntennaConfig87SE(dev, priv->bDefaultAntenna1, priv->bSwAntennaDiverity); priv->bSwAntennaDiverity);
} }
...@@ -560,7 +621,8 @@ void UpdateInitialGain(struct net_device *dev) ...@@ -560,7 +621,8 @@ void UpdateInitialGain(struct net_device *dev)
/* lzm add 080826 */ /* lzm add 080826 */
if (priv->eRFPowerState != eRfOn) { if (priv->eRFPowerState != eRfOn) {
/* Don't access BB/RF under disable PLL situation. /* Don't access BB/RF under disable PLL situation.
* RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain - pHalData->eRFPowerState!=eRfOn\n")); * RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain -
* pHalData->eRFPowerState!=eRfOn\n"));
* Back to the original state * Back to the original state
*/ */
priv->InitialGain = priv->InitialGainBackUp; priv->InitialGain = priv->InitialGainBackUp;
...@@ -635,7 +697,7 @@ static void InitTxPwrTracking87SE(struct net_device *dev) ...@@ -635,7 +697,7 @@ static void InitTxPwrTracking87SE(struct net_device *dev)
u4bRfReg = RF_ReadReg(dev, 0x02); u4bRfReg = RF_ReadReg(dev, 0x02);
/* Enable Thermal meter indication. */ /* Enable Thermal meter indication. */
RF_WriteReg(dev, 0x02, u4bRfReg|PWR_METER_EN); mdelay(1); RF_WriteReg(dev, 0x02, u4bRfReg|PWR_METER_EN); mdelay(1);
} }
static void PhyConfig8185(struct net_device *dev) static void PhyConfig8185(struct net_device *dev)
...@@ -645,16 +707,18 @@ static void PhyConfig8185(struct net_device *dev) ...@@ -645,16 +707,18 @@ static void PhyConfig8185(struct net_device *dev)
priv->RFProgType = read_nic_byte(dev, CONFIG4) & 0x03; priv->RFProgType = read_nic_byte(dev, CONFIG4) & 0x03;
/* RF config */ /* RF config */
ZEBRA_Config_85BASIC_HardCode(dev); ZEBRA_Config_85BASIC_HardCode(dev);
/* Set default initial gain state to 4, approved by SD3 DZ, by Bruce, 2007-06-06. */ /* Set default initial gain state to 4, approved by SD3 DZ, by Bruce,
* 2007-06-06.
*/
if (priv->bDigMechanism) { if (priv->bDigMechanism) {
if (priv->InitialGain == 0) if (priv->InitialGain == 0)
priv->InitialGain = 4; priv->InitialGain = 4;
} }
/* /*
* Enable thermal meter indication to implement TxPower tracking on 87SE. * Enable thermal meter indication to implement TxPower tracking
* We initialize thermal meter here to avoid unsuccessful configuration. * on 87SE. We initialize thermal meter here to avoid unsuccessful
* Added by Roger, 2007.12.11. * configuration. Added by Roger, 2007.12.11.
*/ */
if (priv->bTxPowerTrack) if (priv->bTxPowerTrack)
InitTxPwrTracking87SE(dev); InitTxPwrTracking87SE(dev);
...@@ -667,7 +731,10 @@ static void PhyConfig8185(struct net_device *dev) ...@@ -667,7 +731,10 @@ static void PhyConfig8185(struct net_device *dev)
static void HwConfigureRTL8185(struct net_device *dev) static void HwConfigureRTL8185(struct net_device *dev)
{ {
/* RTL8185_TODO: Determine Retrylimit, TxAGC, AutoRateFallback control. */ /*
* RTL8185_TODO: Determine Retrylimit, TxAGC,
* AutoRateFallback control.
*/
u8 bUNIVERSAL_CONTROL_RL = 0; u8 bUNIVERSAL_CONTROL_RL = 0;
u8 bUNIVERSAL_CONTROL_AGC = 1; u8 bUNIVERSAL_CONTROL_AGC = 1;
u8 bUNIVERSAL_CONTROL_ANT = 1; u8 bUNIVERSAL_CONTROL_ANT = 1;
...@@ -715,7 +782,9 @@ static void HwConfigureRTL8185(struct net_device *dev) ...@@ -715,7 +782,9 @@ static void HwConfigureRTL8185(struct net_device *dev)
if (bAUTO_RATE_FALLBACK_CTL) { if (bAUTO_RATE_FALLBACK_CTL) {
val8 |= RATE_FALLBACK_CTL_ENABLE | RATE_FALLBACK_CTL_AUTO_STEP1; val8 |= RATE_FALLBACK_CTL_ENABLE | RATE_FALLBACK_CTL_AUTO_STEP1;
/* <RJ_TODO_8185B> We shall set up the ARFR according to user's setting. */ /* <RJ_TODO_8185B> We shall set up the ARFR according
* to user's setting.
*/
PlatformIOWrite2Byte(dev, ARFR, 0x0fff); /* set 1M ~ 54Mbps. */ PlatformIOWrite2Byte(dev, ARFR, 0x0fff); /* set 1M ~ 54Mbps. */
} }
write_nic_byte(dev, RATE_FALLBACK, val8); write_nic_byte(dev, RATE_FALLBACK, val8);
...@@ -724,9 +793,9 @@ static void HwConfigureRTL8185(struct net_device *dev) ...@@ -724,9 +793,9 @@ static void HwConfigureRTL8185(struct net_device *dev)
static void MacConfig_85BASIC_HardCode(struct net_device *dev) static void MacConfig_85BASIC_HardCode(struct net_device *dev)
{ {
/* /*
*========================================================================== *======================================================================
* MACREG.TXT * MACREG.TXT
*========================================================================== *======================================================================
*/ */
int nLinesRead = 0; int nLinesRead = 0;
u32 u4bRegOffset, u4bRegValue, u4bPageIndex = 0; u32 u4bRegOffset, u4bRegValue, u4bPageIndex = 0;
...@@ -745,7 +814,7 @@ static void MacConfig_85BASIC_HardCode(struct net_device *dev) ...@@ -745,7 +814,7 @@ static void MacConfig_85BASIC_HardCode(struct net_device *dev)
write_nic_byte(dev, u4bRegOffset, (u8)u4bRegValue); write_nic_byte(dev, u4bRegOffset, (u8)u4bRegValue);
} }
/* ============================================================================ */ /* ================================================================= */
} }
static void MacConfig_85BASIC(struct net_device *dev) static void MacConfig_85BASIC(struct net_device *dev)
...@@ -754,12 +823,14 @@ static void MacConfig_85BASIC(struct net_device *dev) ...@@ -754,12 +823,14 @@ static void MacConfig_85BASIC(struct net_device *dev)
u8 u1DA; u8 u1DA;
MacConfig_85BASIC_HardCode(dev); MacConfig_85BASIC_HardCode(dev);
/* ============================================================================ */ /* ================================================================= */
/* Follow TID_AC_MAP of WMac. */ /* Follow TID_AC_MAP of WMac. */
write_nic_word(dev, TID_AC_MAP, 0xfa50); write_nic_word(dev, TID_AC_MAP, 0xfa50);
/* Interrupt Migration, Jong suggested we use set 0x0000 first, 2005.12.14, by rcnjko. */ /* Interrupt Migration, Jong suggested we use set 0x0000 first,
* 2005.12.14, by rcnjko.
*/
write_nic_word(dev, IntMig, 0x0000); write_nic_word(dev, IntMig, 0x0000);
/* Prevent TPC to cause CRC error. Added by Annie, 2006-06-10. */ /* Prevent TPC to cause CRC error. Added by Annie, 2006-06-10. */
...@@ -768,7 +839,11 @@ static void MacConfig_85BASIC(struct net_device *dev) ...@@ -768,7 +839,11 @@ static void MacConfig_85BASIC(struct net_device *dev)
PlatformIOWrite1Byte(dev, 0x1F8, 0x00); PlatformIOWrite1Byte(dev, 0x1F8, 0x00);
/* Asked for by SD3 CM Lin, 2006.06.27, by rcnjko. */ /* Asked for by SD3 CM Lin, 2006.06.27, by rcnjko. */
/* power save parameter based on "87SE power save parameters 20071127.doc", as follow. */
/*
* power save parameter based on
* "87SE power save parameters 20071127.doc", as follow.
*/
/* Enable DA10 TX power saving */ /* Enable DA10 TX power saving */
u1DA = read_nic_byte(dev, PHYPR); u1DA = read_nic_byte(dev, PHYPR);
...@@ -803,27 +878,42 @@ static void ActUpdateChannelAccessSetting(struct net_device *dev, ...@@ -803,27 +878,42 @@ static void ActUpdateChannelAccessSetting(struct net_device *dev,
/* /*
* <RJ_TODO_8185B> * <RJ_TODO_8185B>
* TODO: We still don't know how to set up these registers, just follow WMAC to * TODO: We still don't know how to set up these registers,
* verify 8185B FPAG. * just follow WMAC to verify 8185B FPAG.
* *
* <RJ_TODO_8185B> * <RJ_TODO_8185B>
* Jong said CWmin/CWmax register are not functional in 8185B, * Jong said CWmin/CWmax register are not functional in 8185B,
* so we shall fill channel access realted register into AC parameter registers, * so we shall fill channel access realted register into AC
* parameter registers,
* even in nQBss. * even in nQBss.
*/ */
ChnlAccessSetting->SIFS_Timer = 0x22; /* Suggested by Jong, 2005.12.08. */
/* Suggested by Jong, 2005.12.08. */
ChnlAccessSetting->SIFS_Timer = 0x22;
ChnlAccessSetting->DIFS_Timer = 0x1C; /* 2006.06.02, by rcnjko. */ ChnlAccessSetting->DIFS_Timer = 0x1C; /* 2006.06.02, by rcnjko. */
ChnlAccessSetting->SlotTimeTimer = 9; /* 2006.06.02, by rcnjko. */ ChnlAccessSetting->SlotTimeTimer = 9; /* 2006.06.02, by rcnjko. */
ChnlAccessSetting->EIFS_Timer = 0x5B; /* Suggested by wcchu, it is the default value of EIFS register, 2005.12.08. */ /*
* Suggested by wcchu, it is the default value of EIFS register,
* 2005.12.08.
*/
ChnlAccessSetting->EIFS_Timer = 0x5B;
ChnlAccessSetting->CWminIndex = 3; /* 2006.06.02, by rcnjko. */ ChnlAccessSetting->CWminIndex = 3; /* 2006.06.02, by rcnjko. */
ChnlAccessSetting->CWmaxIndex = 7; /* 2006.06.02, by rcnjko. */ ChnlAccessSetting->CWmaxIndex = 7; /* 2006.06.02, by rcnjko. */
write_nic_byte(dev, SIFS, ChnlAccessSetting->SIFS_Timer); write_nic_byte(dev, SIFS, ChnlAccessSetting->SIFS_Timer);
write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer); /* Rewrited from directly use PlatformEFIOWrite1Byte(), by Annie, 2006-03-29. */ /*
* Rewrited from directly use PlatformEFIOWrite1Byte(),
* by Annie, 2006-03-29.
*/
write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer);
write_nic_byte(dev, EIFS, ChnlAccessSetting->EIFS_Timer); write_nic_byte(dev, EIFS, ChnlAccessSetting->EIFS_Timer);
write_nic_byte(dev, AckTimeOutReg, 0x5B); /* <RJ_EXPR_QOS> Suggested by wcchu, it is the default value of EIFS register, 2005.12.08. */ /*
* <RJ_EXPR_QOS> Suggested by wcchu, it is the default value of EIFS
* register, 2005.12.08.
*/
write_nic_byte(dev, AckTimeOutReg, 0x5B);
for (eACI = 0; eACI < AC_MAX; eACI++) { for (eACI = 0; eACI < AC_MAX; eACI++) {
write_nic_byte(dev, ACM_CONTROL, 0); write_nic_byte(dev, ACM_CONTROL, 0);
...@@ -837,7 +927,10 @@ static void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode) ...@@ -837,7 +927,10 @@ static void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode)
u8 btSupportedWirelessMode = GetSupportedWirelessMode8185(dev); u8 btSupportedWirelessMode = GetSupportedWirelessMode8185(dev);
if ((btWirelessMode & btSupportedWirelessMode) == 0) { if ((btWirelessMode & btSupportedWirelessMode) == 0) {
/* Don't switch to unsupported wireless mode, 2006.02.15, by rcnjko. */ /*
* Don't switch to unsupported wireless mode, 2006.02.15,
* by rcnjko.
*/
DMESGW("ActSetWirelessMode8185(): WirelessMode(%d) is not supported (%d)!\n", DMESGW("ActSetWirelessMode8185(): WirelessMode(%d) is not supported (%d)!\n",
btWirelessMode, btSupportedWirelessMode); btWirelessMode, btSupportedWirelessMode);
return; return;
...@@ -861,9 +954,9 @@ static void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode) ...@@ -861,9 +954,9 @@ static void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode)
/* /*
* 2. Swtich band: RF or BB specific actions, * 2. Swtich band: RF or BB specific actions,
* for example, refresh tables in omc8255, or change initial gain if necessary. * for example, refresh tables in omc8255, or change initial gain if
* Nothing to do for Zebra to switch band. * necessary. Nothing to do for Zebra to switch band. Update current
* Update current wireless mode if we switch to specified band successfully. * wireless mode if we switch to specified band successfully.
*/ */
ieee->mode = (WIRELESS_MODE)btWirelessMode; ieee->mode = (WIRELESS_MODE)btWirelessMode;
...@@ -876,7 +969,8 @@ static void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode) ...@@ -876,7 +969,8 @@ static void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode)
else if (ieee->mode == WIRELESS_MODE_G) else if (ieee->mode == WIRELESS_MODE_G)
DMESG("WIRELESS_MODE_G\n"); DMESG("WIRELESS_MODE_G\n");
ActUpdateChannelAccessSetting( dev, ieee->mode, &priv->ChannelAccessSetting); ActUpdateChannelAccessSetting( dev, ieee->mode,
&priv->ChannelAccessSetting);
} }
void rtl8185b_irq_enable(struct net_device *dev) void rtl8185b_irq_enable(struct net_device *dev)
...@@ -901,9 +995,10 @@ static void MgntDisconnectIBSS(struct net_device *dev) ...@@ -901,9 +995,10 @@ static void MgntDisconnectIBSS(struct net_device *dev)
/* /*
* Stop Beacon. * Stop Beacon.
* *
* Vista add a Adhoc profile, HW radio off until OID_DOT11_RESET_REQUEST * Vista add a Adhoc profile, HW radio off until
* Driver would set MSR=NO_LINK, then HW Radio ON, MgntQueue Stuck. * OID_DOT11_RESET_REQUEST Driver would set MSR=NO_LINK,
* Because Bcn DMA isn't complete, mgnt queue would stuck until Bcn packet send. * then HW Radio ON, MgntQueue Stuck. Because Bcn DMA isn't
* complete, mgnt queue would stuck until Bcn packet send.
* *
* Disable Beacon Queue Own bit, suggested by jong * Disable Beacon Queue Own bit, suggested by jong
*/ */
...@@ -938,12 +1033,14 @@ static void MgntDisconnectAP(struct net_device *dev, u8 asRsn) ...@@ -938,12 +1033,14 @@ static void MgntDisconnectAP(struct net_device *dev, u8 asRsn)
* Commented out by rcnjko, 2005.01.27: * Commented out by rcnjko, 2005.01.27:
* I move SecClearAllKeys() to MgntActSet_802_11_DISASSOCIATE(). * I move SecClearAllKeys() to MgntActSet_802_11_DISASSOCIATE().
* *
* 2004/09/15, kcwu, the key should be cleared, or the new handshaking will not success * 2004/09/15, kcwu, the key should be cleared, or the new
* handshaking will not success
* *
* In WPA WPA2 need to Clear all key ... because new key will set after new handshaking. * In WPA WPA2 need to Clear all key ... because new key will set
* 2004.10.11, by rcnjko. * after new handshaking. 2004.10.11, by rcnjko.
*/ */
MlmeDisassociateRequest(dev, priv->ieee80211->current_network.bssid, asRsn); MlmeDisassociateRequest(dev, priv->ieee80211->current_network.bssid,
asRsn);
priv->ieee80211->state = IEEE80211_NOLINK; priv->ieee80211->state = IEEE80211_NOLINK;
} }
...@@ -964,11 +1061,13 @@ static bool MgntDisconnect(struct net_device *dev, u8 asRsn) ...@@ -964,11 +1061,13 @@ static bool MgntDisconnect(struct net_device *dev, u8 asRsn)
if (priv->ieee80211->iw_mode == IW_MODE_INFRA) { if (priv->ieee80211->iw_mode == IW_MODE_INFRA) {
/* /*
* We clear key here instead of MgntDisconnectAP() because that * We clear key here instead of MgntDisconnectAP()
* MgntActSet_802_11_DISASSOCIATE() is an interface called by OS, * because that MgntActSet_802_11_DISASSOCIATE()
* e.g. OID_802_11_DISASSOCIATE in Windows while as MgntDisconnectAP() is * is an interface called by OS, e.g.
* used to handle disassociation related things to AP, e.g. send Disassoc * OID_802_11_DISASSOCIATE in Windows while as
* frame to AP. 2005.01.27, by rcnjko. * MgntDisconnectAP() is used to handle
* disassociation related things to AP, e.g. send
* Disassoc frame to AP. 2005.01.27, by rcnjko.
*/ */
MgntDisconnectAP(dev, asRsn); MgntDisconnectAP(dev, asRsn);
} }
...@@ -979,12 +1078,14 @@ static bool MgntDisconnect(struct net_device *dev, u8 asRsn) ...@@ -979,12 +1078,14 @@ static bool MgntDisconnect(struct net_device *dev, u8 asRsn)
/* /*
* Description: * Description:
* Chang RF Power State. * Chang RF Power State.
* Note that, only MgntActSet_RF_State() is allowed to set HW_VAR_RF_STATE. * Note that, only MgntActSet_RF_State() is allowed to set
* HW_VAR_RF_STATE.
* *
* Assumption: * Assumption:
* PASSIVE LEVEL. * PASSIVE LEVEL.
*/ */
static bool SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState) static bool SetRFPowerState(struct net_device *dev,
RT_RF_POWER_STATE eRFPowerState)
{ {
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
bool bResult = false; bool bResult = false;
...@@ -997,7 +1098,8 @@ static bool SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerSt ...@@ -997,7 +1098,8 @@ static bool SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerSt
return bResult; return bResult;
} }
bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u32 ChangeSource) bool MgntActSet_RF_State(struct net_device *dev,
RT_RF_POWER_STATE StateToSet, u32 ChangeSource)
{ {
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
bool bActionAllowed = false; bool bActionAllowed = false;
...@@ -1006,8 +1108,9 @@ bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u ...@@ -1006,8 +1108,9 @@ bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u
u16 RFWaitCounter = 0; u16 RFWaitCounter = 0;
unsigned long flag; unsigned long flag;
/* /*
* Prevent the race condition of RF state change. By Bruce, 2007-11-28. * Prevent the race condition of RF state change. By Bruce,
* Only one thread can change the RF state at one time, and others should wait to be executed. * 2007-11-28. Only one thread can change the RF state at one time,
* and others should wait to be executed.
*/ */
while (true) { while (true) {
spin_lock_irqsave(&priv->rf_ps_lock, flag); spin_lock_irqsave(&priv->rf_ps_lock, flag);
...@@ -1018,7 +1121,10 @@ bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u ...@@ -1018,7 +1121,10 @@ bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u
RFWaitCounter++; RFWaitCounter++;
udelay(1000); /* 1 ms */ udelay(1000); /* 1 ms */
/* Wait too long, return FALSE to avoid to be stuck here. */ /*
* Wait too long, return FALSE to avoid
* to be stuck here.
*/
if (RFWaitCounter > 1000) { /* 1sec */ if (RFWaitCounter > 1000) { /* 1sec */
printk("MgntActSet_RF_State(): Wait too long to set RF\n"); printk("MgntActSet_RF_State(): Wait too long to set RF\n");
/* TODO: Reset RF state? */ /* TODO: Reset RF state? */
...@@ -1036,8 +1142,10 @@ bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u ...@@ -1036,8 +1142,10 @@ bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u
switch (StateToSet) { switch (StateToSet) {
case eRfOn: case eRfOn:
/* /*
* Turn On RF no matter the IPS setting because we need to update the RF state to Ndis under Vista, or * Turn On RF no matter the IPS setting because we need to
* the Windows does not allow the driver to perform site survey any more. By Bruce, 2007-10-02. * update the RF state to Ndis under Vista, or the Windows
* does not allow the driver to perform site survey any
* more. By Bruce, 2007-10-02.
*/ */
priv->RfOffReason &= (~ChangeSource); priv->RfOffReason &= (~ChangeSource);
...@@ -1045,7 +1153,8 @@ bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u ...@@ -1045,7 +1153,8 @@ bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u
priv->RfOffReason = 0; priv->RfOffReason = 0;
bActionAllowed = true; bActionAllowed = true;
if (rtState == eRfOff && ChangeSource >= RF_CHANGE_BY_HW) if (rtState == eRfOff &&
ChangeSource >= RF_CHANGE_BY_HW)
bConnectBySSID = true; bConnectBySSID = true;
} }
break; break;
...@@ -1056,13 +1165,18 @@ bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u ...@@ -1056,13 +1165,18 @@ bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u
if (priv->RfOffReason > RF_CHANGE_BY_IPS) { if (priv->RfOffReason > RF_CHANGE_BY_IPS) {
/* /*
* 060808, Annie: * 060808, Annie:
* Disconnect to current BSS when radio off. Asked by QuanTa. * Disconnect to current BSS when radio off.
* Asked by QuanTa.
* *
* Calling MgntDisconnect() instead of MgntActSet_802_11_DISASSOCIATE(), * Calling MgntDisconnect() instead of
* because we do NOT need to set ssid to dummy ones. * MgntActSet_802_11_DISASSOCIATE(), because
* we do NOT need to set ssid to dummy ones.
*/ */
MgntDisconnect(dev, disas_lv_ss); MgntDisconnect(dev, disas_lv_ss);
/* Clear content of bssDesc[] and bssDesc4Query[] to avoid reporting old bss to UI. */ /*
* Clear content of bssDesc[] and bssDesc4Query[]
* to avoid reporting old bss to UI.
*/
} }
priv->RfOffReason |= ChangeSource; priv->RfOffReason |= ChangeSource;
...@@ -1092,18 +1206,21 @@ static void InactivePowerSave(struct net_device *dev) ...@@ -1092,18 +1206,21 @@ static void InactivePowerSave(struct net_device *dev)
{ {
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
/* /*
* This flag "bSwRfProcessing", indicates the status of IPS procedure, should be set if the IPS workitem * This flag "bSwRfProcessing", indicates the status of IPS
* is really scheduled. * procedure, should be set if the IPS workitem is really
* The old code, sets this flag before scheduling the IPS workitem and however, at the same time the * scheduled. The old code, sets this flag before scheduling the
* previous IPS workitem did not end yet, fails to schedule the current workitem. Thus, bSwRfProcessing * IPS workitem and however, at the same time the previous IPS
* blocks the IPS procedure of switching RF. * workitem did not end yet, fails to schedule the current
* workitem. Thus, bSwRfProcessing blocks the IPS procedure of
* switching RF.
*/ */
priv->bSwRfProcessing = true; priv->bSwRfProcessing = true;
MgntActSet_RF_State(dev, priv->eInactivePowerState, RF_CHANGE_BY_IPS); MgntActSet_RF_State(dev, priv->eInactivePowerState, RF_CHANGE_BY_IPS);
/* /*
* To solve CAM values miss in RF OFF, rewrite CAM values after RF ON. By Bruce, 2007-09-20. * To solve CAM values miss in RF OFF, rewrite CAM values after
* RF ON. By Bruce, 2007-09-20.
*/ */
priv->bSwRfProcessing = false; priv->bSwRfProcessing = false;
...@@ -1122,10 +1239,10 @@ void IPSEnter(struct net_device *dev) ...@@ -1122,10 +1239,10 @@ void IPSEnter(struct net_device *dev)
/* /*
* Do not enter IPS in the following conditions: * Do not enter IPS in the following conditions:
* (1) RF is already OFF or Sleep * (1) RF is already OFF or
* (2) bSwRfProcessing (indicates the IPS is still under going) * Sleep (2) bSwRfProcessing (indicates the IPS is still
* (3) Connected (only disconnected can trigger IPS) * under going) (3) Connected (only disconnected can
* (4) IBSS (send Beacon) * trigger IPS)(4) IBSS (send Beacon)
* (5) AP mode (send Beacon) * (5) AP mode (send Beacon)
*/ */
if (rtState == eRfOn && !priv->bSwRfProcessing if (rtState == eRfOn && !priv->bSwRfProcessing
...@@ -1141,7 +1258,9 @@ void IPSLeave(struct net_device *dev) ...@@ -1141,7 +1258,9 @@ void IPSLeave(struct net_device *dev)
RT_RF_POWER_STATE rtState; RT_RF_POWER_STATE rtState;
if (priv->bInactivePs) { if (priv->bInactivePs) {
rtState = priv->eRFPowerState; rtState = priv->eRFPowerState;
if ((rtState == eRfOff || rtState == eRfSleep) && (!priv->bSwRfProcessing) && priv->RfOffReason <= RF_CHANGE_BY_IPS) { if ((rtState == eRfOff || rtState == eRfSleep) &&
!priv->bSwRfProcessing
&& priv->RfOffReason <= RF_CHANGE_BY_IPS) {
priv->eInactivePowerState = eRfOn; priv->eInactivePowerState = eRfOn;
InactivePowerSave(dev); InactivePowerSave(dev);
} }
...@@ -1170,27 +1289,32 @@ void rtl8185b_adapter_start(struct net_device *dev) ...@@ -1170,27 +1289,32 @@ void rtl8185b_adapter_start(struct net_device *dev)
HwConfigureRTL8185(dev); HwConfigureRTL8185(dev);
write_nic_dword(dev, MAC0, ((u32 *)dev->dev_addr)[0]); write_nic_dword(dev, MAC0, ((u32 *)dev->dev_addr)[0]);
write_nic_word(dev, MAC4, ((u32 *)dev->dev_addr)[1] & 0xffff); write_nic_word(dev, MAC4, ((u32 *)dev->dev_addr)[1] & 0xffff);
write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3); /* default network type to 'No Link' */ /* default network type to 'No Link' */
write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3);
write_nic_word(dev, BcnItv, 100); write_nic_word(dev, BcnItv, 100);
write_nic_word(dev, AtimWnd, 2); write_nic_word(dev, AtimWnd, 2);
PlatformIOWrite2Byte(dev, FEMR, 0xFFFF); PlatformIOWrite2Byte(dev, FEMR, 0xFFFF);
write_nic_byte(dev, WPA_CONFIG, 0); write_nic_byte(dev, WPA_CONFIG, 0);
MacConfig_85BASIC(dev); MacConfig_85BASIC(dev);
/* Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07, by rcnjko. */ /* Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07,
* by rcnjko.
*/
/* BT_DEMO_BOARD type */ /* BT_DEMO_BOARD type */
PlatformIOWrite2Byte(dev, RFSW_CTRL, 0x569a); PlatformIOWrite2Byte(dev, RFSW_CTRL, 0x569a);
/* /*
*--------------------------------------------------------------------------- *---------------------------------------------------------------------
* Set up PHY related. * Set up PHY related.
*--------------------------------------------------------------------------- *---------------------------------------------------------------------
*/ */
/* Enable Config3.PARAM_En to revise AnaaParm. */ /* Enable Config3.PARAM_En to revise AnaaParm. */
write_nic_byte(dev, CR9346, 0xc0); /* enable config register write */ write_nic_byte(dev, CR9346, 0xc0); /* enable config register write */
tmpu8 = read_nic_byte(dev, CONFIG3); tmpu8 = read_nic_byte(dev, CONFIG3);
write_nic_byte(dev, CONFIG3, (tmpu8 | CONFIG3_PARM_En)); write_nic_byte(dev, CONFIG3, (tmpu8 | CONFIG3_PARM_En));
/* Turn on Analog power. */ /* Turn on Analog power. */
/* Asked for by William, otherwise, MAC 3-wire can't work, 2006.06.27, by rcnjko. */ /* Asked for by William, otherwise, MAC 3-wire can't work,
* 2006.06.27, by rcnjko.
*/
write_nic_dword(dev, ANAPARAM2, ANAPARM2_ASIC_ON); write_nic_dword(dev, ANAPARAM2, ANAPARM2_ASIC_ON);
write_nic_dword(dev, ANAPARAM, ANAPARM_ASIC_ON); write_nic_dword(dev, ANAPARAM, ANAPARM_ASIC_ON);
write_nic_word(dev, ANAPARAM3, 0x0010); write_nic_word(dev, ANAPARAM3, 0x0010);
...@@ -1225,7 +1349,8 @@ void rtl8185b_adapter_start(struct net_device *dev) ...@@ -1225,7 +1349,8 @@ void rtl8185b_adapter_start(struct net_device *dev)
/* /*
* We assume RegWirelessMode has already been initialized before, * We assume RegWirelessMode has already been initialized before,
* however, we has to validate the wireless mode here and provide a * however, we has to validate the wireless mode here and provide a
* reasonable initialized value if necessary. 2005.01.13, by rcnjko. * reasonable initialized value if necessary. 2005.01.13,
* by rcnjko.
*/ */
SupportedWirelessMode = GetSupportedWirelessMode8185(dev); SupportedWirelessMode = GetSupportedWirelessMode8185(dev);
if ((ieee->mode != WIRELESS_MODE_B) && if ((ieee->mode != WIRELESS_MODE_B) &&
...@@ -1272,14 +1397,15 @@ void rtl8185b_adapter_start(struct net_device *dev) ...@@ -1272,14 +1397,15 @@ void rtl8185b_adapter_start(struct net_device *dev)
MgntActSet_RF_State(dev, eRfOn, 0); MgntActSet_RF_State(dev, eRfOn, 0);
} }
/* /*
* If inactive power mode is enabled, disable rf while in disconnected state. * If inactive power mode is enabled, disable rf while in
* disconnected state.
*/ */
if (priv->bInactivePs) if (priv->bInactivePs)
MgntActSet_RF_State(dev , eRfOff, RF_CHANGE_BY_IPS); MgntActSet_RF_State(dev , eRfOff, RF_CHANGE_BY_IPS);
ActSetWirelessMode8185(dev, (u8)(InitWirelessMode)); ActSetWirelessMode8185(dev, (u8)(InitWirelessMode));
/* ----------------------------------------------------------------------------- */ /* ----------------------------------------------------------------- */
rtl8185b_irq_enable(dev); rtl8185b_irq_enable(dev);
...@@ -1303,7 +1429,8 @@ void rtl8185b_rx_enable(struct net_device *dev) ...@@ -1303,7 +1429,8 @@ void rtl8185b_rx_enable(struct net_device *dev)
} }
if (priv->ieee80211->iw_mode == IW_MODE_MONITOR) if (priv->ieee80211->iw_mode == IW_MODE_MONITOR)
priv->ReceiveConfig = priv->ReceiveConfig | RCR_ACF | RCR_APWRMGT | RCR_AICV; priv->ReceiveConfig = priv->ReceiveConfig | RCR_ACF |
RCR_APWRMGT | RCR_AICV;
if (priv->crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR) if (priv->crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR)
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或