clk: sunxi-ng: add support for DE2 CCU

The "Display Engine 2.0" in Allwinner newer SoCs contains a clock
management unit for its subunits, like the DE CCU in A80.

Add a sunxi-ng style driver for it.
Signed-off-by: NIcenowy Zheng <icenowy@aosc.io>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

drivers/clk/sunxi-ng/Kconfig

@@ -140,6 +140,11 @@ config SUN8I_V3S_CCU
 	default MACH_SUN8I
 	depends on MACH_SUN8I || COMPILE_TEST
 
+config SUN8I_DE2_CCU
+	bool "Support for the Allwinner SoCs DE2 CCU"
+	select SUNXI_CCU_DIV
+	select SUNXI_CCU_GATE
+
 config SUN9I_A80_CCU
 	bool "Support for the Allwinner A80 CCU"
 	select SUNXI_CCU_DIV

drivers/clk/sunxi-ng/Makefile

@@ -25,6 +25,7 @@ obj-$(CONFIG_SUN8I_A23_CCU)	+= ccu-sun8i-a23.o
 obj-$(CONFIG_SUN8I_A33_CCU)	+= ccu-sun8i-a33.o
 obj-$(CONFIG_SUN8I_H3_CCU)	+= ccu-sun8i-h3.o
 obj-$(CONFIG_SUN8I_V3S_CCU)	+= ccu-sun8i-v3s.o
+obj-$(CONFIG_SUN8I_DE2_CCU)	+= ccu-sun8i-de2.o
 obj-$(CONFIG_SUN8I_R_CCU)	+= ccu-sun8i-r.o
 obj-$(CONFIG_SUN9I_A80_CCU)	+= ccu-sun9i-a80.o
 obj-$(CONFIG_SUN9I_A80_CCU)	+= ccu-sun9i-a80-de.o

drivers/clk/sunxi-ng/ccu-sun8i-de2.c

+/*
+ * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include "ccu_common.h"
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_reset.h"
+
+#include "ccu-sun8i-de2.h"
+
+static SUNXI_CCU_GATE(bus_mixer0_clk,	"bus-mixer0",	"bus-de",
+		      0x04, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_mixer1_clk,	"bus-mixer1",	"bus-de",
+		      0x04, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_wb_clk,	"bus-wb",	"bus-de",
+		      0x04, BIT(2), 0);
+
+static SUNXI_CCU_GATE(mixer0_clk,	"mixer0",	"mixer0-div",
+		      0x00, BIT(0), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(mixer1_clk,	"mixer1",	"mixer1-div",
+		      0x00, BIT(1), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(wb_clk,		"wb",		"wb-div",
+		      0x00, BIT(2), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M(mixer0_div_clk, "mixer0-div", "de", 0x0c, 0, 4,
+		   CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M(mixer1_div_clk, "mixer1-div", "de", 0x0c, 4, 4,
+		   CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M(wb_div_clk, "wb-div", "de", 0x0c, 8, 4,
+		   CLK_SET_RATE_PARENT);
+
+static struct ccu_common *sun8i_a83t_de2_clks[] = {
+	&mixer0_clk.common,
+	&mixer1_clk.common,
+	&wb_clk.common,
+
+	&bus_mixer0_clk.common,
+	&bus_mixer1_clk.common,
+	&bus_wb_clk.common,
+
+	&mixer0_div_clk.common,
+	&mixer1_div_clk.common,
+	&wb_div_clk.common,
+};
+
+static struct ccu_common *sun8i_v3s_de2_clks[] = {
+	&mixer0_clk.common,
+	&wb_clk.common,
+
+	&bus_mixer0_clk.common,
+	&bus_wb_clk.common,
+
+	&mixer0_div_clk.common,
+	&wb_div_clk.common,
+};
+
+static struct clk_hw_onecell_data sun8i_a83t_de2_hw_clks = {
+	.hws	= {
+		[CLK_MIXER0]		= &mixer0_clk.common.hw,
+		[CLK_MIXER1]		= &mixer1_clk.common.hw,
+		[CLK_WB]		= &wb_clk.common.hw,
+
+		[CLK_BUS_MIXER0]	= &bus_mixer0_clk.common.hw,
+		[CLK_BUS_MIXER1]	= &bus_mixer1_clk.common.hw,
+		[CLK_BUS_WB]		= &bus_wb_clk.common.hw,
+
+		[CLK_MIXER0_DIV]	= &mixer0_div_clk.common.hw,
+		[CLK_MIXER1_DIV]	= &mixer1_div_clk.common.hw,
+		[CLK_WB_DIV]		= &wb_div_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static struct clk_hw_onecell_data sun8i_v3s_de2_hw_clks = {
+	.hws	= {
+		[CLK_MIXER0]		= &mixer0_clk.common.hw,
+		[CLK_WB]		= &wb_clk.common.hw,
+
+		[CLK_BUS_MIXER0]	= &bus_mixer0_clk.common.hw,
+		[CLK_BUS_WB]		= &bus_wb_clk.common.hw,
+
+		[CLK_MIXER0_DIV]	= &mixer0_div_clk.common.hw,
+		[CLK_WB_DIV]		= &wb_div_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun8i_a83t_de2_resets[] = {
+	[RST_MIXER0]	= { 0x08, BIT(0) },
+	/*
+	 * For A83T, H3 and R40, mixer1 reset line is shared with wb, so
+	 * only RST_WB is exported here.
+	 * For V3s there's just no mixer1, so it also shares this struct.
+	 */
+	[RST_WB]	= { 0x08, BIT(2) },
+};
+
+static struct ccu_reset_map sun50i_a64_de2_resets[] = {
+	[RST_MIXER0]	= { 0x08, BIT(0) },
+	[RST_MIXER1]	= { 0x08, BIT(1) },
+	[RST_WB]	= { 0x08, BIT(2) },
+};
+
+static const struct sunxi_ccu_desc sun8i_a83t_de2_clk_desc = {
+	.ccu_clks	= sun8i_a83t_de2_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun8i_a83t_de2_clks),
+
+	.hw_clks	= &sun8i_a83t_de2_hw_clks,
+
+	.resets		= sun8i_a83t_de2_resets,
+	.num_resets	= ARRAY_SIZE(sun8i_a83t_de2_resets),
+};
+
+static const struct sunxi_ccu_desc sun50i_a64_de2_clk_desc = {
+	.ccu_clks	= sun8i_a83t_de2_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun8i_a83t_de2_clks),
+
+	.hw_clks	= &sun8i_a83t_de2_hw_clks,
+
+	.resets		= sun50i_a64_de2_resets,
+	.num_resets	= ARRAY_SIZE(sun50i_a64_de2_resets),
+};
+
+static const struct sunxi_ccu_desc sun8i_v3s_de2_clk_desc = {
+	.ccu_clks	= sun8i_v3s_de2_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun8i_v3s_de2_clks),
+
+	.hw_clks	= &sun8i_v3s_de2_hw_clks,
+
+	.resets		= sun8i_a83t_de2_resets,
+	.num_resets	= ARRAY_SIZE(sun8i_a83t_de2_resets),
+};
+
+static int sunxi_de2_clk_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct clk *bus_clk, *mod_clk;
+	struct reset_control *rstc;
+	void __iomem *reg;
+	const struct sunxi_ccu_desc *ccu_desc;
+	int ret;
+
+	ccu_desc = of_device_get_match_data(&pdev->dev);
+	if (!ccu_desc)
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	bus_clk = devm_clk_get(&pdev->dev, "bus");
+	if (IS_ERR(bus_clk)) {
+		ret = PTR_ERR(bus_clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
+		return ret;
+	}
+
+	mod_clk = devm_clk_get(&pdev->dev, "mod");
+	if (IS_ERR(mod_clk)) {
+		ret = PTR_ERR(mod_clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Couldn't get mod clk: %d\n", ret);
+		return ret;
+	}
+
+	rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(rstc)) {
+		ret = PTR_ERR(bus_clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"Couldn't get reset control: %d\n", ret);
+		return ret;
+	}
+
+	/* The clocks need to be enabled for us to access the registers */
+	ret = clk_prepare_enable(bus_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Couldn't enable bus clk: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(mod_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Couldn't enable mod clk: %d\n", ret);
+		goto err_disable_bus_clk;
+	}
+
+	/* The reset control needs to be asserted for the controls to work */
+	ret = reset_control_deassert(rstc);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Couldn't deassert reset control: %d\n", ret);
+		goto err_disable_mod_clk;
+	}
+
+	ret = sunxi_ccu_probe(pdev->dev.of_node, reg, ccu_desc);
+	if (ret)
+		goto err_assert_reset;
+
+	return 0;
+
+err_assert_reset:
+	reset_control_assert(rstc);
+err_disable_mod_clk:
+	clk_disable_unprepare(mod_clk);
+err_disable_bus_clk:
+	clk_disable_unprepare(bus_clk);
+	return ret;
+}
+
+static const struct of_device_id sunxi_de2_clk_ids[] = {
+	{
+		.compatible = "allwinner,sun8i-a83t-de2-clk",
+		.data = &sun8i_a83t_de2_clk_desc,
+	},
+	{
+		.compatible = "allwinner,sun8i-v3s-de2-clk",
+		.data = &sun8i_v3s_de2_clk_desc,
+	},
+	{
+		.compatible = "allwinner,sun50i-h5-de2-clk",
+		.data = &sun50i_a64_de2_clk_desc,
+	},
+	/*
+	 * The Allwinner A64 SoC needs some bit to be poke in syscon to make
+	 * DE2 really working.
+	 * So there's currently no A64 compatible here.
+	 * H5 shares the same reset line with A64, so here H5 is using the
+	 * clock description of A64.
+	 */
+	{ }
+};
+
+static struct platform_driver sunxi_de2_clk_driver = {
+	.probe	= sunxi_de2_clk_probe,
+	.driver	= {
+		.name	= "sunxi-de2-clks",
+		.of_match_table	= sunxi_de2_clk_ids,
+	},
+};
+builtin_platform_driver(sunxi_de2_clk_driver);

drivers/clk/sunxi-ng/ccu-sun8i-de2.h

+/*
+ * Copyright 2016 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN8I_DE2_H_
+#define _CCU_SUN8I_DE2_H_
+
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+
+/* Intermediary clock dividers are not exported */
+#define CLK_MIXER0_DIV	3
+#define CLK_MIXER1_DIV	4
+#define CLK_WB_DIV	5
+
+#define CLK_NUMBER	(CLK_WB + 1)
+
+#endif /* _CCU_SUN8I_DE2_H_ */