diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h index c6583cfa58359b91295d8dd64243ba4c1e2f0367..0d622f3b57a5710ce36c4e689dc1e83416d642e4 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h @@ -520,7 +520,7 @@ #define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C) #define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90) -/* interrupt filtering conrrol for EINT16..EINT23 */ +/* interrupt filtering control for EINT16..EINT23 */ #define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94) #define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98) #define S3C2410_EINFLT2 S3C2410_GPIOREG(0x9C) diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c index 4cd13ab6496b0c44874a6990e0b6c85da16e0340..65e5f9cb650fa4572a62b3dd7ece68db0526678a 100644 --- a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c +++ b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c @@ -423,7 +423,7 @@ void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, * @timings: The IO timing information to fill out. * * Calculate the @timings timing information from the current frequency - * information in @cfg, and the new frequency configur + * information in @cfg, and the new frequency configuration * through all the IO banks, reading the state and then updating @iot * as necessary. * diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 171c1f11fd224bde7c97196c54294028805a3c0c..070a0d0714a5e169d59e75487970f809122ddc2b 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -522,7 +522,7 @@ static void __init n30_hwinit(void) * * The pull ups for H6/H7 are enabled on N30 but not on the * N35/PiN. I suppose is useful for a budget model of the N30 - * with no bluetooh. It doesn't hurt to have the pull ups + * with no bluetooth. It doesn't hurt to have the pull ups * enabled on the N35, so leave them enabled for all models. */ __raw_writel(0x0028aaaa, S3C2410_GPHCON); diff --git a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c index ce2db235dbafbc7743777c0a3e1f6b40b88af01b..262ab07447483aa810dda25b139cd81be61d2d68 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c +++ b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c @@ -143,7 +143,7 @@ static int osiris_dvs_remove(struct platform_device *pdev) return 0; } -/* the CONFIG_PM block is so small, it isn't worth actaully compiling it +/* the CONFIG_PM block is so small, it isn't worth actually compiling it * out if the configuration isn't set. */ static int osiris_dvs_suspend(struct device *dev) diff --git a/arch/arm/mach-s3c24xx/pll-s3c2410.c b/arch/arm/mach-s3c24xx/pll-s3c2410.c index 5e37d368594b6ac0e5a459cf80c5bd0f7ac4d77b..7ee4924a543d7ad977fe040a716652cef8c6f357 100644 --- a/arch/arm/mach-s3c24xx/pll-s3c2410.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2410.c @@ -32,11 +32,12 @@ #include #include +/* This array should be sorted in ascending order of the frequencies */ static struct cpufreq_frequency_table pll_vals_12MHz[] = { { .frequency = 34000000, .driver_data = PLLVAL(82, 2, 3), }, { .frequency = 45000000, .driver_data = PLLVAL(82, 1, 3), }, - { .frequency = 51000000, .driver_data = PLLVAL(161, 3, 3), }, { .frequency = 48000000, .driver_data = PLLVAL(120, 2, 3), }, + { .frequency = 51000000, .driver_data = PLLVAL(161, 3, 3), }, { .frequency = 56000000, .driver_data = PLLVAL(142, 2, 3), }, { .frequency = 68000000, .driver_data = PLLVAL(82, 2, 2), }, { .frequency = 79000000, .driver_data = PLLVAL(71, 1, 2), }, diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c index b355fca6cc2efb1a3fccd3763c91430acb66fd69..a3fbfed75e28be1a2d7858482ee12ff38791fef5 100644 --- a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c @@ -20,6 +20,7 @@ #include #include +/* This array should be sorted in ascending order of the frequencies */ static struct cpufreq_frequency_table s3c2440_plls_12[] = { { .frequency = 75000000, .driver_data = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */ { .frequency = 80000000, .driver_data = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */ diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c index be9a248b5ce901b5eaed665ec4f5d75632775ebc..bcff89fd98715511b013ddc7a5bcc838ecc95621 100644 --- a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c @@ -20,6 +20,7 @@ #include #include +/* This array should be sorted in ascending order of the frequencies */ static struct cpufreq_frequency_table s3c2440_plls_169344[] = { { .frequency = 78019200, .driver_data = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */ { .frequency = 84067200, .driver_data = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */ diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h index f55ccb1ce893b888c4cf2031611f22f52a8620ee..d51873e8f63f87f4a20ec316078eaab3185fae5d 100644 --- a/arch/arm/mach-s3c64xx/include/mach/map.h +++ b/arch/arm/mach-s3c64xx/include/mach/map.h @@ -99,7 +99,7 @@ #define S3C64XX_PA_USB_HSPHY (0x7C100000) -/* compatibiltiy defines. */ +/* compatibility defines. */ #define S3C_PA_TIMER S3C64XX_PA_TIMER #define S3C_PA_HSMMC0 S3C64XX_PA_HSMMC0 #define S3C_PA_HSMMC1 S3C64XX_PA_HSMMC1 diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index 317c523032888690bb4fb9832c13908edd47204a..37cf20e04aff23e633688d10379fd7381ffde4d4 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -39,7 +39,7 @@ struct s3c2410_iobank_timing { unsigned int tacs; unsigned int tcos; unsigned int tacc; - unsigned int tcoh; /* nCS hold afrer nOE/nWE */ + unsigned int tcoh; /* nCS hold after nOE/nWE */ unsigned int tcah; /* Address hold after nCS */ unsigned char nwait_en; /* nWait enabled for bank. */ }; diff --git a/arch/arm/plat-samsung/include/plat/fb-s3c2410.h b/arch/arm/plat-samsung/include/plat/fb-s3c2410.h index 4e5d9588b5baaca84299ec164078a88e11f5d2ff..1f2972a74e9fce64c4064bbf134855cd490c8aa7 100644 --- a/arch/arm/plat-samsung/include/plat/fb-s3c2410.h +++ b/arch/arm/plat-samsung/include/plat/fb-s3c2410.h @@ -48,7 +48,7 @@ struct s3c2410fb_display { struct s3c2410fb_mach_info { - struct s3c2410fb_display *displays; /* attached diplays info */ + struct s3c2410fb_display *displays; /* attached displays info */ unsigned num_displays; /* number of defined displays */ unsigned default_display; diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index b5294eff18b5c7f7decd9cb842a7cf4adaa208f3..21391faab068b5eb6bc027af7874f1e0defd8471 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -35,7 +35,7 @@ struct samsung_gpio_chip; * struct samsung_gpio_cfg GPIO configuration * @cfg_eint: Configuration setting when used for external interrupt source * @get_pull: Read the current pull configuration for the GPIO - * @set_pull: Set the current pull configuraiton for the GPIO + * @set_pull: Set the current pull configuration for the GPIO * @set_config: Set the current configuration for the GPIO * @get_config: Read the current configuration for the GPIO * diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c index 70f2f699bed3efe0802def3dc879cdd8e8857a05..d63516374f7cfe184ddbffca0e651182ac497fd1 100644 --- a/arch/arm/plat-samsung/pm-check.c +++ b/arch/arm/plat-samsung/pm-check.c @@ -5,7 +5,7 @@ * http://armlinux.simtec.co.uk * Ben Dooks * - * S3C Power Mangament - suspend/resume memory corruptiuon check. + * S3C Power Mangament - suspend/resume memory corruption check. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/plat-samsung/watchdog-reset.c b/arch/arm/plat-samsung/watchdog-reset.c index 2ecb50bea04462c89ebb471273c4dcbcdfb5b85a..307d8ad96a78fb22d92721ae8bc3031133cad301 100644 --- a/arch/arm/plat-samsung/watchdog-reset.c +++ b/arch/arm/plat-samsung/watchdog-reset.c @@ -3,7 +3,7 @@ * Copyright (c) 2008 Simtec Electronics * Ben Dooks * - * Coyright (c) 2013 Tomasz Figa + * Copyright (c) 2013 Tomasz Figa * * Watchdog reset support for Samsung SoCs. *