Merge branch 'depends/cleanup' into next/soc

Signed-off-by: NOlof Johansson <olof@lixom.net>

MAINTAINERS

@@ -4209,6 +4209,7 @@ M:	Thomas Gleixner <tglx@linutronix.de>
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
 F:	kernel/irq/
+F:	drivers/irqchip/
 
 IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
 M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>

arch/arm/common/Kconfig

-config ARM_GIC
-	bool
-	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
-
-config GIC_NON_BANKED
-	bool
-
-config ARM_VIC
-	bool
-	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
-
-config ARM_VIC_NR
-	int
-	default 4 if ARCH_S5PV210
-	default 3 if ARCH_S5PC100
-	default 2
-	depends on ARM_VIC
-	help
-	  The maximum number of VICs available in the system, for
-	  power management.
-
 config ICST
 	bool
 

arch/arm/common/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-obj-$(CONFIG_ARM_GIC)		+= gic.o
-obj-$(CONFIG_ARM_VIC)		+= vic.o
 obj-$(CONFIG_ICST)		+= icst.o
 obj-$(CONFIG_SA1111)		+= sa1111.o
 obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o

arch/arm/include/asm/mach/arch.h

@@ -12,7 +12,6 @@
 
 struct tag;
 struct meminfo;
-struct sys_timer;
 struct pt_regs;
 struct smp_operations;
 #ifdef CONFIG_SMP
@@ -48,7 +47,7 @@ struct machine_desc {
 	void			(*map_io)(void);/* IO mapping function	*/
 	void			(*init_early)(void);
 	void			(*init_irq)(void);
-	struct sys_timer	*timer;		/* system tick timer	*/
+	void			(*init_time)(void);
 	void			(*init_machine)(void);
 	void			(*init_late)(void);
 #ifdef CONFIG_MULTI_IRQ_HANDLER

arch/arm/include/asm/mach/irq.h

@@ -22,6 +22,7 @@ extern int show_fiq_list(struct seq_file *, int);
 
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 extern void (*handle_arch_irq)(struct pt_regs *);
+extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
 #endif
 
 /*

arch/arm/include/asm/mach/time.h

@@ -10,36 +10,6 @@
 #ifndef __ASM_ARM_MACH_TIME_H
 #define __ASM_ARM_MACH_TIME_H
 
-/*
- * This is our kernel timer structure.
- *
- * - init
- *   Initialise the kernels jiffy timer source, claim interrupt
- *   using setup_irq.  This is called early on during initialisation
- *   while interrupts are still disabled on the local CPU.
- * - suspend
- *   Suspend the kernel jiffy timer source, if necessary.  This
- *   is called with interrupts disabled, after all normal devices
- *   have been suspended.  If no action is required, set this to
- *   NULL.
- * - resume
- *   Resume the kernel jiffy timer source, if necessary.  This
- *   is called with interrupts disabled before any normal devices
- *   are resumed.  If no action is required, set this to NULL.
- * - offset
- *   Return the timer offset in microseconds since the last timer
- *   interrupt.  Note: this must take account of any unprocessed
- *   timer interrupt which may be pending.
- */
-struct sys_timer {
-	void			(*init)(void);
-	void			(*suspend)(void);
-	void			(*resume)(void);
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-	unsigned long		(*offset)(void);
-#endif
-};
-
 extern void timer_tick(void);
 
 struct timespec;

arch/arm/kernel/irq.c

@@ -117,6 +117,16 @@ void __init init_IRQ(void)
 	machine_desc->init_irq();
 }
 
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+void __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
+{
+	if (handle_arch_irq)
+		return;
+
+	handle_arch_irq = handle_irq;
+}
+#endif
+
 #ifdef CONFIG_SPARSE_IRQ
 int __init arch_probe_nr_irqs(void)
 {

arch/arm/kernel/smp.c

@@ -416,6 +416,7 @@ static void (*smp_cross_call)(const struct cpumask *, unsigned int);
 
 void __init set_smp_cross_call(void (*fn)(const struct cpumask *, unsigned int))
 {
+	if (!smp_cross_call)
 		smp_cross_call = fn;
 }
 

arch/arm/kernel/smp_twd.c

@@ -24,7 +24,6 @@
 
 #include <asm/smp_twd.h>
 #include <asm/localtimer.h>
-#include <asm/hardware/gic.h>
 
 /* set up by the platform code */
 static void __iomem *twd_base;

arch/arm/kernel/time.c

@@ -21,7 +21,6 @@
 #include <linux/timex.h>
 #include <linux/errno.h>
 #include <linux/profile.h>
-#include <linux/syscore_ops.h>
 #include <linux/timer.h>
 #include <linux/irq.h>
 
@@ -31,11 +30,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
-/*
- * Our system timer.
- */
-static struct sys_timer *system_timer;
-
 #if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \
     defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE)
 /* this needs a better home */
@@ -69,16 +63,6 @@ unsigned long profile_pc(struct pt_regs *regs)
 EXPORT_SYMBOL(profile_pc);
 #endif
 
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-u32 arch_gettimeoffset(void)
-{
-	if (system_timer->offset != NULL)
-		return system_timer->offset() * 1000;
-
-	return 0;
-}
-#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
-
 #ifndef CONFIG_GENERIC_CLOCKEVENTS
 /*
  * Kernel system timer support.
@@ -129,43 +113,8 @@ int __init register_persistent_clock(clock_access_fn read_boot,
 	return -EINVAL;
 }
 
-#if defined(CONFIG_PM) && !defined(CONFIG_GENERIC_CLOCKEVENTS)
-static int timer_suspend(void)
-{
-	if (system_timer->suspend)
-		system_timer->suspend();
-
-	return 0;
-}
-
-static void timer_resume(void)
-{
-	if (system_timer->resume)
-		system_timer->resume();
-}
-#else
-#define timer_suspend NULL
-#define timer_resume NULL
-#endif
-
-static struct syscore_ops timer_syscore_ops = {
-	.suspend	= timer_suspend,
-	.resume		= timer_resume,
-};
-
-static int __init timer_init_syscore_ops(void)
-{
-	register_syscore_ops(&timer_syscore_ops);
-
-	return 0;
-}
-
-device_initcall(timer_init_syscore_ops);
-
 void __init time_init(void)
 {
-	system_timer = machine_desc->timer;
-	system_timer->init();
+	machine_desc->init_time();
 	sched_clock_postinit();
 }
-

arch/arm/mach-at91/at91rm9200_time.c

@@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 static struct clock_event_device clkevt = {
 	.name		= "at91_tick",
 	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.rating		= 150,
 	.set_next_event	= clkevt32k_next_event,
 	.set_mode	= clkevt32k_mode,
@@ -265,17 +264,10 @@ void __init at91rm9200_timer_init(void)
 	at91_st_write(AT91_ST_RTMR, 1);
 
 	/* Setup timer clockevent, with minimum of two ticks (important!!) */
-	clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
-	clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
-	clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
 	clkevt.cpumask = cpumask_of(0);
-	clockevents_register_device(&clkevt);
+	clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
+					2, AT91_ST_ALMV);
 
 	/* register clocksource */
 	clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
 }
-
-struct sys_timer at91rm9200_timer = {
-	.init		= at91rm9200_timer_init,
-};
-

arch/arm/mach-at91/at91sam926x_time.c

@@ -104,12 +104,38 @@ pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 	}
 }
 
+static void at91sam926x_pit_suspend(struct clock_event_device *cedev)
+{
+	/* Disable timer */
+	pit_write(AT91_PIT_MR, 0);
+}
+
+static void at91sam926x_pit_reset(void)
+{
+	/* Disable timer and irqs */
+	pit_write(AT91_PIT_MR, 0);
+
+	/* Clear any pending interrupts, wait for PIT to stop counting */
+	while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
+		cpu_relax();
+
+	/* Start PIT but don't enable IRQ */
+	pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
+}
+
+static void at91sam926x_pit_resume(struct clock_event_device *cedev)
+{
+	at91sam926x_pit_reset();
+}
+
 static struct clock_event_device pit_clkevt = {
 	.name		= "pit",
 	.features	= CLOCK_EVT_FEAT_PERIODIC,
 	.shift		= 32,
 	.rating		= 100,
 	.set_mode	= pit_clkevt_mode,
+	.suspend	= at91sam926x_pit_suspend,
+	.resume		= at91sam926x_pit_resume,
 };
 
 
@@ -150,19 +176,6 @@ static struct irqaction at91sam926x_pit_irq = {
 	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
 };
 
-static void at91sam926x_pit_reset(void)
-{
-	/* Disable timer and irqs */
-	pit_write(AT91_PIT_MR, 0);
-
-	/* Clear any pending interrupts, wait for PIT to stop counting */
-	while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
-		cpu_relax();
-
-	/* Start PIT but don't enable IRQ */
-	pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
-}
-
 #ifdef CONFIG_OF
 static struct of_device_id pit_timer_ids[] = {
 	{ .compatible = "atmel,at91sam9260-pit" },
@@ -211,7 +224,7 @@ static int __init of_at91sam926x_pit_init(void)
 /*
  * Set up both clocksource and clockevent support.
  */
-static void __init at91sam926x_pit_init(void)
+void __init at91sam926x_pit_init(void)
 {
 	unsigned long	pit_rate;
 	unsigned	bits;
@@ -250,12 +263,6 @@ static void __init at91sam926x_pit_init(void)
 	clockevents_register_device(&pit_clkevt);
 }
 
-static void at91sam926x_pit_suspend(void)
-{
-	/* Disable timer */
-	pit_write(AT91_PIT_MR, 0);
-}
-
 void __init at91sam926x_ioremap_pit(u32 addr)
 {
 #if defined(CONFIG_OF)
@@ -272,9 +279,3 @@ void __init at91sam926x_ioremap_pit(u32 addr)
 	if (!pit_base_addr)
 		panic("Impossible to ioremap PIT\n");
 }
-
-struct sys_timer at91sam926x_timer = {
-	.init		= at91sam926x_pit_init,
-	.suspend	= at91sam926x_pit_suspend,
-	.resume		= at91sam926x_pit_reset,
-};

arch/arm/mach-at91/at91x40_time.c

@@ -42,9 +42,10 @@
 #define	AT91_TC_CLK1BASE	0x40
 #define	AT91_TC_CLK2BASE	0x80
 
-static unsigned long at91x40_gettimeoffset(void)
+static u32 at91x40_gettimeoffset(void)
 {
-	return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128));
+	return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 /
+		(AT91X40_MASTER_CLOCK / 128)) * 1000;
 }
 
 static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
@@ -64,6 +65,8 @@ void __init at91x40_timer_init(void)
 {
 	unsigned int v;
 
+	arch_gettimeoffset = at91x40_gettimeoffset;
+
 	at91_tc_write(AT91_TC_BCR, 0);
 	v = at91_tc_read(AT91_TC_BMR);
 	v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE;
@@ -79,9 +82,3 @@ void __init at91x40_timer_init(void)
 
 	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN));
 }
-
-struct sys_timer at91x40_timer = {
-	.init	= at91x40_timer_init,
-	.offset	= at91x40_gettimeoffset,
-};
-

arch/arm/mach-at91/board-1arm.c

@@ -90,7 +90,7 @@ static void __init onearm_board_init(void)
 
 MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= onearm_init_early,

arch/arm/mach-at91/board-afeb-9260v1.c

@@ -210,7 +210,7 @@ static void __init afeb9260_board_init(void)
 
 MACHINE_START(AFEB9260, "Custom afeb9260 board")
 	/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= afeb9260_init_early,

arch/arm/mach-at91/board-cam60.c

@@ -187,7 +187,7 @@ static void __init cam60_board_init(void)
 
 MACHINE_START(CAM60, "KwikByte CAM60")
 	/* Maintainer: KwikByte */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= cam60_init_early,

arch/arm/mach-at91/board-carmeva.c

@@ -157,7 +157,7 @@ static void __init carmeva_board_init(void)
 
 MACHINE_START(CARMEVA, "Carmeva")
 	/* Maintainer: Conitec Datasystems */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= carmeva_init_early,

arch/arm/mach-at91/board-cpu9krea.c

@@ -374,7 +374,7 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260")
 MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
 #endif
 	/* Maintainer: Eric Benard - EUKREA Electromatique */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= cpu9krea_init_early,

arch/arm/mach-at91/board-cpuat91.c

@@ -178,7 +178,7 @@ static void __init cpuat91_board_init(void)
 
 MACHINE_START(CPUAT91, "Eukrea")
 	/* Maintainer: Eric Benard - EUKREA Electromatique */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= cpuat91_init_early,

arch/arm/mach-at91/board-csb337.c

@@ -251,7 +251,7 @@ static void __init csb337_board_init(void)
 
 MACHINE_START(CSB337, "Cogent CSB337")
 	/* Maintainer: Bill Gatliff */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= csb337_init_early,

arch/arm/mach-at91/board-csb637.c

@@ -132,7 +132,7 @@ static void __init csb637_board_init(void)
 
 MACHINE_START(CSB637, "Cogent CSB637")
 	/* Maintainer: Bill Gatliff */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= csb637_init_early,

arch/arm/mach-at91/board-dt.c

@@ -49,7 +49,7 @@ static const char *at91_dt_board_compat[] __initdata = {
 
 DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91_dt_initialize,

arch/arm/mach-at91/board-eb01.c

@@ -44,7 +44,7 @@ static void __init at91eb01_init_early(void)
 
 MACHINE_START(AT91EB01, "Atmel AT91 EB01")
 	/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
-	.timer		= &at91x40_timer,
+	.init_time	= at91x40_timer_init,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91eb01_init_early,
 	.init_irq	= at91eb01_init_irq,

arch/arm/mach-at91/board-eb9200.c

@@ -116,7 +116,7 @@ static void __init eb9200_board_init(void)
 }
 
 MACHINE_START(ATEB9200, "Embest ATEB9200")
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= eb9200_init_early,

arch/arm/mach-at91/board-ecbat91.c

@@ -181,7 +181,7 @@ static void __init ecb_at91board_init(void)
 
 MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
 	/* Maintainer: emQbit.com */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ecb_at91init_early,

arch/arm/mach-at91/board-eco920.c

@@ -149,7 +149,7 @@ static void __init eco920_board_init(void)
 
 MACHINE_START(ECO920, "eco920")
 	/* Maintainer: Sascha Hauer */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= eco920_init_early,

arch/arm/mach-at91/board-flexibity.c

@@ -159,7 +159,7 @@ static void __init flexibity_board_init(void)
 
 MACHINE_START(FLEXIBITY, "Flexibity Connect")
 	/* Maintainer: Maxim Osipov */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= flexibity_init_early,

arch/arm/mach-at91/board-foxg20.c

@@ -261,7 +261,7 @@ static void __init foxg20_board_init(void)
 
 MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20")
 	/* Maintainer: Sergio Tanzilli */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= foxg20_init_early,

arch/arm/mach-at91/board-gsia18s.c

@@ -574,7 +574,7 @@ static void __init gsia18s_board_init(void)
 }
 
 MACHINE_START(GSIA18S, "GS_IA18_S")
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= gsia18s_init_early,

arch/arm/mach-at91/board-kafa.c

@@ -103,7 +103,7 @@ static void __init kafa_board_init(void)
 
 MACHINE_START(KAFA, "Sperry-Sun KAFA")
 	/* Maintainer: Sergei Sharonov */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= kafa_init_early,

arch/arm/mach-at91/board-kb9202.c

@@ -149,7 +149,7 @@ static void __init kb9202_board_init(void)
 
 MACHINE_START(KB9200, "KB920x")
 	/* Maintainer: KwikByte, Inc. */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= kb9202_init_early,

arch/arm/mach-at91/board-neocore926.c

@@ -378,7 +378,7 @@ static void __init neocore926_board_init(void)
 
 MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926")
 	/* Maintainer: ADENEO */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= neocore926_init_early,

arch/arm/mach-at91/board-pcontrol-g20.c

@@ -217,7 +217,7 @@ static void __init pcontrol_g20_board_init(void)
 
 MACHINE_START(PCONTROL_G20, "PControl G20")
 	/* Maintainer: pgsellmann@portner-elektronik.at */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= pcontrol_g20_init_early,

arch/arm/mach-at91/board-picotux200.c

@@ -119,7 +119,7 @@ static void __init picotux200_board_init(void)
 
 MACHINE_START(PICOTUX2XX, "picotux 200")
 	/* Maintainer: Kleinhenz Elektronik GmbH */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= picotux200_init_early,

arch/arm/mach-at91/board-qil-a9260.c

@@ -257,7 +257,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
 	/* Maintainer: calao-systems */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,

arch/arm/mach-at91/board-rm9200-dt.c

@@ -47,7 +47,7 @@ static const char *at91rm9200_dt_board_compat[] __initdata = {
 };
 
 DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
-	.timer		= &at91rm9200_timer,
+	.init_time      = at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91rm9200_dt_initialize,

arch/arm/mach-at91/board-rm9200dk.c

@@ -219,7 +219,7 @@ static void __init dk_board_init(void)
 
 MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
 	/* Maintainer: SAN People/Atmel */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= dk_init_early,

arch/arm/mach-at91/board-rm9200ek.c

@@ -186,7 +186,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
 	/* Maintainer: SAN People/Atmel */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,

arch/arm/mach-at91/board-rsi-ews.c

@@ -222,7 +222,7 @@ static void __init rsi_ews_board_init(void)
 
 MACHINE_START(RSI_EWS, "RSI EWS")
 	/* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= rsi_ews_init_early,

arch/arm/mach-at91/board-sam9-l9260.c

@@ -218,7 +218,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
 	/* Maintainer: Olimex */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,

arch/arm/mach-at91/board-sam9260ek.c

@@ -343,7 +343,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,

arch/arm/mach-at91/board-sam9261ek.c

@@ -612,7 +612,7 @@ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
 MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
 #endif
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,

arch/arm/mach-at91/board-sam9263ek.c

@@ -443,7 +443,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,

arch/arm/mach-at91/board-sam9g20ek.c

@@ -409,7 +409,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
@@ -419,7 +419,7 @@ MACHINE_END
 
 MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,

arch/arm/mach-at91/board-sam9m10g45ek.c

@@ -502,7 +502,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,

arch/arm/mach-at91/board-sam9rlek.c

@@ -320,7 +320,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,

arch/arm/mach-at91/board-snapper9260.c

@@ -177,7 +177,7 @@ static void __init snapper9260_board_init(void)
 }
 
 MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= snapper9260_init_early,

arch/arm/mach-at91/board-stamp9g20.c

@@ -272,7 +272,7 @@ static void __init stamp9g20evb_board_init(void)
 
 MACHINE_START(PORTUXG20, "taskit PortuxG20")
 	/* Maintainer: taskit GmbH */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= stamp9g20_init_early,
@@ -282,7 +282,7 @@ MACHINE_END
 
 MACHINE_START(STAMP9G20, "taskit Stamp9G20")
 	/* Maintainer: taskit GmbH */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= stamp9g20_init_early,

arch/arm/mach-at91/board-usb-a926x.c

@@ -355,7 +355,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(USB_A9263, "CALAO USB_A9263")
 	/* Maintainer: calao-systems */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
@@ -365,7 +365,7 @@ MACHINE_END
 
 MACHINE_START(USB_A9260, "CALAO USB_A9260")
 	/* Maintainer: calao-systems */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
@@ -375,7 +375,7 @@ MACHINE_END
 
 MACHINE_START(USB_A9G20, "CALAO USB_A92G0")
 	/* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,

arch/arm/mach-at91/board-yl-9200.c

@@ -587,7 +587,7 @@ static void __init yl9200_board_init(void)
 
 MACHINE_START(YL9200, "uCdragon YL-9200")
 	/* Maintainer: S.Birtles */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= yl9200_init_early,

arch/arm/mach-at91/generic.h

@@ -36,12 +36,11 @@ extern int  __init at91_aic5_of_init(struct device_node *node,
 
 
  /* Timer */
-struct sys_timer;
 extern void at91rm9200_ioremap_st(u32 addr);
-extern struct sys_timer at91rm9200_timer;
+extern void at91rm9200_timer_init(void);
 extern void at91sam926x_ioremap_pit(u32 addr);
-extern struct sys_timer at91sam926x_timer;
-extern struct sys_timer at91x40_timer;
+extern void at91sam926x_pit_init(void);
+extern void at91x40_timer_init(void);
 
  /* Clocks */
 #ifdef CONFIG_AT91_PMC_UNIT

arch/arm/mach-bcm/board_bcm.c

@@ -11,34 +11,19 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
+#include <linux/irqchip.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-
 #include <asm/mach/time.h>
 
-static const struct of_device_id irq_match[] = {
-	{.compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{}
-};
-
 static void timer_init(void)
 {
 }
 
-static struct sys_timer timer = {
-	.init = timer_init,
-};
-
-static void __init init_irq(void)
-{
-	of_irq_init(irq_match);
-}
 
 static void __init board_init(void)
 {
@@ -49,9 +34,8 @@ static void __init board_init(void)
 static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, };
 
 DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor")
-	.init_irq = init_irq,
-	.timer = &timer,
+	.init_irq = irqchip_init,
+	.init_time = timer_init,
 	.init_machine = board_init,
 	.dt_compat = bcm11351_dt_compat,
-	.handle_irq = gic_handle_irq,
 MACHINE_END

arch/arm/mach-bcm2835/bcm2835.c

@@ -104,7 +104,7 @@ DT_MACHINE_START(BCM2835, "BCM2835")
 	.init_irq = bcm2835_init_irq,
 	.handle_irq = bcm2835_handle_irq,
 	.init_machine = bcm2835_init,
-	.timer = &bcm2835_timer,
+	.init_time = bcm2835_timer_init,
 	.restart = bcm2835_restart,
 	.dt_compat = bcm2835_compat
 MACHINE_END

arch/arm/mach-clps711x/board-autcpu12.c

@@ -170,7 +170,7 @@ MACHINE_START(AUTCPU12, "autronix autcpu12")
 	.nr_irqs	= CLPS711X_NR_IRQS,
 	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
+	.init_time	= clps711x_timer_init,
 	.init_machine	= autcpu12_init,
 	.init_late	= autcpu12_init_late,
 	.handle_irq	= clps711x_handle_irq,

arch/arm/mach-clps711x/board-cdb89712.c

@@ -140,7 +140,7 @@ MACHINE_START(CDB89712, "Cirrus-CDB89712")
 	.nr_irqs	= CLPS711X_NR_IRQS,
 	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
+	.init_time	= clps711x_timer_init,
 	.init_machine	= cdb89712_init,
 	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,

arch/arm/mach-clps711x/board-clep7312.c

@@ -40,7 +40,7 @@ MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
 	.fixup		= fixup_clep7312,
 	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
+	.init_time	= clps711x_timer_init,
 	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,
 MACHINE_END

arch/arm/mach-clps711x/board-edb7211.c

@@ -173,7 +173,7 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	.reserve	= edb7211_reserve,
 	.map_io		= edb7211_map_io,
 	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
+	.init_time	= clps711x_timer_init,
 	.init_machine	= edb7211_init,
 	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,

arch/arm/mach-clps711x/board-fortunet.c

@@ -78,7 +78,7 @@ MACHINE_START(FORTUNET, "ARM-FortuNet")
 	.fixup		= fortunet_fixup,
 	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
+	.init_time	= clps711x_timer_init,
 	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,
 MACHINE_END

arch/arm/mach-clps711x/board-p720t.c

@@ -224,7 +224,7 @@ MACHINE_START(P720T, "ARM-Prospector720T")
 	.map_io		= p720t_map_io,
 	.init_early	= p720t_init_early,
 	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
+	.init_time	= clps711x_timer_init,
 	.init_machine	= p720t_init,
 	.init_late	= p720t_init_late,
 	.handle_irq	= clps711x_handle_irq,

arch/arm/mach-clps711x/common.c

@@ -282,7 +282,7 @@ static void add_fixed_clk(struct clk *clk, const char *name, int rate)
 	clk_register_clkdev(clk, name, NULL);
 }
 
-static void __init clps711x_timer_init(void)
+void __init clps711x_timer_init(void)
 {
 	int osc, ext, pll, cpu, bus, timl, timh, uart, spi;
 	u32 tmp;
@@ -345,10 +345,6 @@ static void __init clps711x_timer_init(void)
 	setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
 }
 
-struct sys_timer clps711x_timer = {
-	.init		= clps711x_timer_init,
-};
-
 void clps711x_restart(char mode, const char *cmd)
 {
 	soft_restart(0);

arch/arm/mach-clps711x/common.h

@@ -8,10 +8,8 @@
 #define CLPS711X_NR_GPIO	(4 * 8 + 3)
 #define CLPS711X_GPIO(prt, bit)	((prt) * 8 + (bit))
 
-struct sys_timer;
-
 extern void clps711x_map_io(void);
 extern void clps711x_init_irq(void);
+extern void clps711x_timer_init(void);
 extern void clps711x_handle_irq(struct pt_regs *regs);
 extern void clps711x_restart(char mode, const char *cmd);
-extern struct sys_timer clps711x_timer;

arch/arm/mach-cns3xxx/cns3420vb.c

@@ -28,7 +28,6 @@
 #include <linux/usb/ohci_pdriver.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -250,8 +249,7 @@ MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
 	.atag_offset	= 0x100,
 	.map_io		= cns3420_map_io,
 	.init_irq	= cns3xxx_init_irq,
-	.timer		= &cns3xxx_timer,
-	.handle_irq	= gic_handle_irq,
+	.init_time	= cns3xxx_timer_init,
 	.init_machine	= cns3420_init,
 	.restart	= cns3xxx_restart,
 MACHINE_END

arch/arm/mach-cns3xxx/core.c

@@ -12,10 +12,10 @@
 #include <linux/interrupt.h>
 #include <linux/clockchips.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <mach/cns3xxx.h>
 #include "core.h"
@@ -134,7 +134,6 @@ static int cns3xxx_timer_set_next_event(unsigned long evt,
 
 static struct clock_event_device cns3xxx_tmr1_clockevent = {
 	.name		= "cns3xxx timer1",
-	.shift		= 8,
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_mode	= cns3xxx_timer_set_mode,
 	.set_next_event	= cns3xxx_timer_set_next_event,
@@ -145,15 +144,9 @@ static struct clock_event_device cns3xxx_tmr1_clockevent = {
 static void __init cns3xxx_clockevents_init(unsigned int timer_irq)
 {
 	cns3xxx_tmr1_clockevent.irq = timer_irq;
-	cns3xxx_tmr1_clockevent.mult =
-		div_sc((cns3xxx_cpu_clock() >> 3) * 1000000, NSEC_PER_SEC,
-		       cns3xxx_tmr1_clockevent.shift);
-	cns3xxx_tmr1_clockevent.max_delta_ns =
-		clockevent_delta2ns(0xffffffff, &cns3xxx_tmr1_clockevent);
-	cns3xxx_tmr1_clockevent.min_delta_ns =
-		clockevent_delta2ns(0xf, &cns3xxx_tmr1_clockevent);
-
-	clockevents_register_device(&cns3xxx_tmr1_clockevent);
+	clockevents_config_and_register(&cns3xxx_tmr1_clockevent,
+					(cns3xxx_cpu_clock() >> 3) * 1000000,
+					0xf, 0xffffffff);
 }
 
 /*
@@ -235,17 +228,13 @@ static void __init __cns3xxx_timer_init(unsigned int timer_irq)
 	cns3xxx_clockevents_init(timer_irq);
 }
 
-static void __init cns3xxx_timer_init(void)
+void __init cns3xxx_timer_init(void)
 {
 	cns3xxx_tmr1 = IOMEM(CNS3XXX_TIMER1_2_3_BASE_VIRT);
 
 	__cns3xxx_timer_init(IRQ_CNS3XXX_TIMER0);
 }
 
-struct sys_timer cns3xxx_timer = {
-	.init = cns3xxx_timer_init,
-};
-
 #ifdef CONFIG_CACHE_L2X0
 
 void __init cns3xxx_l2x0_init(void)

arch/arm/mach-cns3xxx/core.h

@@ -11,7 +11,7 @@
 #ifndef __CNS3XXX_CORE_H
 #define __CNS3XXX_CORE_H
 
-extern struct sys_timer cns3xxx_timer;
+extern void cns3xxx_timer_init(void);
 
 #ifdef CONFIG_CACHE_L2X0
 void __init cns3xxx_l2x0_init(void);

arch/arm/mach-davinci/board-da830-evm.c

@@ -679,7 +679,7 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
 	.atag_offset	= 0x100,
 	.map_io		= da830_evm_map_io,
 	.init_irq	= cp_intc_init,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine	= da830_evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,

arch/arm/mach-davinci/board-da850-evm.c

@@ -1599,7 +1599,7 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
 	.atag_offset	= 0x100,
 	.map_io		= da850_evm_map_io,
 	.init_irq	= cp_intc_init,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine	= da850_evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,

arch/arm/mach-davinci/board-dm355-evm.c

@@ -355,7 +355,7 @@ MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
 	.atag_offset  = 0x100,
 	.map_io	      = dm355_evm_map_io,
 	.init_irq     = davinci_irq_init,
-	.timer	      = &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = dm355_evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,

arch/arm/mach-davinci/board-dm355-leopard.c

@@ -274,7 +274,7 @@ MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
 	.atag_offset  = 0x100,
 	.map_io	      = dm355_leopard_map_io,
 	.init_irq     = davinci_irq_init,
-	.timer	      = &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = dm355_leopard_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,

arch/arm/mach-davinci/board-dm365-evm.c

@@ -616,7 +616,7 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
 	.atag_offset	= 0x100,
 	.map_io		= dm365_evm_map_io,
 	.init_irq	= davinci_irq_init,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine	= dm365_evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -825,7 +825,7 @@ MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
 	.atag_offset  = 0x100,
 	.map_io	      = davinci_evm_map_io,
 	.init_irq     = davinci_irq_init,
-	.timer	      = &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = davinci_evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -818,7 +818,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
 	.atag_offset  = 0x100,
 	.map_io       = davinci_map_io,
 	.init_irq     = davinci_irq_init,
-	.timer        = &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
@@ -829,7 +829,7 @@ MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
 	.atag_offset  = 0x100,
 	.map_io       = davinci_map_io,
 	.init_irq     = davinci_irq_init,
-	.timer        = &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,

arch/arm/mach-davinci/board-mityomapl138.c

@@ -570,7 +570,7 @@ MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
 	.atag_offset	= 0x100,
 	.map_io		= mityomapl138_map_io,
 	.init_irq	= cp_intc_init,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine	= mityomapl138_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,

arch/arm/mach-davinci/board-neuros-osd2.c

@@ -237,7 +237,7 @@ MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
 	.atag_offset	= 0x100,
 	.map_io		 = davinci_ntosd2_map_io,
 	.init_irq	= davinci_irq_init,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = davinci_ntosd2_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -341,7 +341,7 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
 	.atag_offset	= 0x100,
 	.map_io		= omapl138_hawk_map_io,
 	.init_irq	= cp_intc_init,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine	= omapl138_hawk_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,

arch/arm/mach-davinci/board-sffsdr.c

@@ -155,7 +155,7 @@ MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
 	.atag_offset  = 0x100,
 	.map_io	      = davinci_sffsdr_map_io,
 	.init_irq     = davinci_irq_init,
-	.timer	      = &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine = davinci_sffsdr_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,

arch/arm/mach-davinci/board-tnetv107x-evm.c

@@ -280,7 +280,7 @@ MACHINE_START(TNETV107X, "TNETV107X EVM")
 	.atag_offset	= 0x100,
 	.map_io		= tnetv107x_init,
 	.init_irq	= cp_intc_init,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine	= tnetv107x_evm_board_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,

arch/arm/mach-davinci/da8xx-dt.c

@@ -56,7 +56,7 @@ static const char *da850_boards_compat[] __initdata = {
 DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x")
 	.map_io		= da850_init,
 	.init_irq	= da8xx_init_irq,
-	.timer		= &davinci_timer,
+	.init_time	= davinci_timer_init,
 	.init_machine	= da850_init_machine,
 	.dt_compat	= da850_boards_compat,
 	.init_late	= davinci_init_late,

arch/arm/mach-davinci/include/mach/common.h

@@ -15,9 +15,7 @@
 #include <linux/compiler.h>
 #include <linux/types.h>
 
-struct sys_timer;
-
-extern struct sys_timer davinci_timer;
+extern void davinci_timer_init(void);
 
 extern void davinci_irq_init(void);
 extern void __iomem *davinci_intc_base;

arch/arm/mach-davinci/time.c

@@ -337,7 +337,7 @@ static struct clock_event_device clockevent_davinci = {
 };
 
 
-static void __init davinci_timer_init(void)
+void __init davinci_timer_init(void)
 {
 	struct clk *timer_clk;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -410,11 +410,6 @@ static void __init davinci_timer_init(void)
 		timer32_config(&timers[i]);
 }
 
-struct sys_timer davinci_timer = {
-	.init   = davinci_timer_init,
-};
-
-
 /* reset board using watchdog timer */
 void davinci_watchdog_reset(struct platform_device *pdev)
 {

arch/arm/mach-dove/cm-a510.c

@@ -92,6 +92,6 @@ MACHINE_START(CM_A510, "Compulab CM-A510 Board")
 	.map_io		= dove_map_io,
 	.init_early	= dove_init_early,
 	.init_irq	= dove_init_irq,
-	.timer		= &dove_timer,
+	.init_time	= dove_timer_init,
 	.restart	= dove_restart,
 MACHINE_END

arch/arm/mach-dove/common.c

@@ -242,17 +242,13 @@ static int __init dove_find_tclk(void)
 	return 166666667;
 }
 
-static void __init dove_timer_init(void)
+void __init dove_timer_init(void)
 {
 	dove_tclk = dove_find_tclk();
 	orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
 			IRQ_DOVE_BRIDGE, dove_tclk);
 }
 
-struct sys_timer dove_timer = {
-	.init = dove_timer_init,
-};
-
 /*****************************************************************************
  * Cryptographic Engines and Security Accelerator (CESA)
  ****************************************************************************/
@@ -454,7 +450,7 @@ DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
 	.map_io		= dove_map_io,
 	.init_early	= dove_init_early,
 	.init_irq	= orion_dt_init_irq,
-	.timer		= &dove_timer,
+	.init_time	= dove_timer_init,
 	.init_machine	= dove_dt_init,
 	.restart	= dove_restart,
 	.dt_compat	= dove_dt_board_compat,

arch/arm/mach-dove/common.h

@@ -14,7 +14,7 @@
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 
-extern struct sys_timer dove_timer;
+extern void dove_timer_init(void);
 
 /*
  * Basic Dove init functions used early by machine-setup.

arch/arm/mach-dove/dove-db-setup.c

@@ -98,6 +98,6 @@ MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
 	.map_io		= dove_map_io,
 	.init_early	= dove_init_early,
 	.init_irq	= dove_init_irq,
-	.timer		= &dove_timer,
+	.init_time	= dove_timer_init,
 	.restart	= dove_restart,
 MACHINE_END

arch/arm/mach-ebsa110/core.c

@@ -158,7 +158,7 @@ static void __init ebsa110_init_early(void)
  * interrupt, then the PIT counter will roll over (ie, be negative).
  * This actually works out to be convenient.
  */
-static unsigned long ebsa110_gettimeoffset(void)
+static u32 ebsa110_gettimeoffset(void)
 {
 	unsigned long offset, count;
 
@@ -181,7 +181,7 @@ static unsigned long ebsa110_gettimeoffset(void)
 	 */
 	offset = offset * (1000000 / HZ) / COUNT;
 
-	return offset;
+	return offset * 1000;
 }
 
 static irqreturn_t
@@ -213,8 +213,10 @@ static struct irqaction ebsa110_timer_irq = {
 /*
  * Set up timer interrupt.
  */
-static void __init ebsa110_timer_init(void)
+void __init ebsa110_timer_init(void)
 {
+	arch_gettimeoffset = ebsa110_gettimeoffset;
+
 	/*
 	 * Timer 1, mode 2, LSB/MSB
 	 */
@@ -225,11 +227,6 @@ static void __init ebsa110_timer_init(void)
 	setup_irq(IRQ_EBSA110_TIMER0, &ebsa110_timer_irq);
 }
 
-static struct sys_timer ebsa110_timer = {
-	.init		= ebsa110_timer_init,
-	.offset		= ebsa110_gettimeoffset,
-};
-
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.iobase		= 0x3f8,
@@ -328,6 +325,6 @@ MACHINE_START(EBSA110, "EBSA110")
 	.map_io		= ebsa110_map_io,
 	.init_early	= ebsa110_init_early,
 	.init_irq	= ebsa110_init_irq,
-	.timer		= &ebsa110_timer,
+	.init_time	= ebsa110_timer_init,
 	.restart	= ebsa110_restart,
 MACHINE_END

arch/arm/mach-ep93xx/adssphere.c

@@ -17,7 +17,6 @@
 
 #include <mach/hardware.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -39,8 +38,7 @@ MACHINE_START(ADSSPHERE, "ADS Sphere board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= adssphere_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,

arch/arm/mach-ep93xx/core.c

@@ -34,6 +34,7 @@
 #include <linux/i2c-gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/export.h>
+#include <linux/irqchip/arm-vic.h>
 
 #include <mach/hardware.h>
 #include <linux/platform_data/video-ep93xx.h>
@@ -44,8 +45,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <asm/hardware/vic.h>
-
 #include "soc.h"
 
 /*************************************************************************
@@ -140,11 +139,29 @@ static struct irqaction ep93xx_timer_irq = {
 	.handler	= ep93xx_timer_interrupt,
 };
 
-static void __init ep93xx_timer_init(void)
+static u32 ep93xx_gettimeoffset(void)
+{
+	int offset;
+
+	offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
+
+	/*
+	 * Timer 4 is based on a 983.04 kHz reference clock,
+	 * so dividing by 983040 gives the fraction of a second,
+	 * so dividing by 0.983040 converts to uS.
+	 * Refactor the calculation to avoid overflow.
+	 * Finally, multiply by 1000 to give nS.
+	 */
+	return (offset + (53 * offset / 3072)) * 1000;
+}
+
+void __init ep93xx_timer_init(void)
 {
 	u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
 		    EP93XX_TIMER123_CONTROL_CLKSEL;
 
+	arch_gettimeoffset = ep93xx_gettimeoffset;
+
 	/* Enable periodic HZ timer.  */
 	__raw_writel(tmode, EP93XX_TIMER1_CONTROL);
 	__raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD);
@@ -158,21 +175,6 @@ static void __init ep93xx_timer_init(void)
 	setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
 }
 
-static unsigned long ep93xx_gettimeoffset(void)
-{
-	int offset;
-
-	offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
-
-	/* Calculate (1000000 / 983040) * offset.  */
-	return offset + (53 * offset / 3072);
-}
-
-struct sys_timer ep93xx_timer = {
-	.init		= ep93xx_timer_init,
-	.offset		= ep93xx_gettimeoffset,
-};
-
 
 /*************************************************************************
  * EP93xx IRQ handling

arch/arm/mach-ep93xx/edb93xx.c

@@ -39,7 +39,6 @@
 #include <linux/platform_data/spi-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -276,8 +275,7 @@ MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
@@ -290,8 +288,7 @@ MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
@@ -304,8 +301,7 @@ MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
@@ -318,8 +314,7 @@ MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
@@ -332,8 +327,7 @@ MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
@@ -346,8 +340,7 @@ MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
@@ -360,8 +353,7 @@ MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
@@ -374,8 +366,7 @@ MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,

arch/arm/mach-ep93xx/gesbc9312.c

@@ -17,7 +17,6 @@
 
 #include <mach/hardware.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -39,8 +38,7 @@ MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= gesbc9312_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,

arch/arm/mach-ep93xx/include/mach/platform.h

@@ -53,7 +53,7 @@ int ep93xx_ide_acquire_gpio(struct platform_device *pdev);
 void ep93xx_ide_release_gpio(struct platform_device *pdev);
 
 void ep93xx_init_devices(void);
-extern struct sys_timer ep93xx_timer;
+extern void ep93xx_timer_init(void);
 
 void ep93xx_restart(char, const char *);
 void ep93xx_init_late(void);

arch/arm/mach-ep93xx/micro9.c

@@ -18,7 +18,6 @@
 
 #include <mach/hardware.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -82,8 +81,7 @@ MACHINE_START(MICRO9, "Contec Micro9-High")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= micro9_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
@@ -96,8 +94,7 @@ MACHINE_START(MICRO9M, "Contec Micro9-Mid")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= micro9_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
@@ -110,8 +107,7 @@ MACHINE_START(MICRO9L, "Contec Micro9-Lite")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= micro9_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
@@ -124,8 +120,7 @@ MACHINE_START(MICRO9S, "Contec Micro9-Slim")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= micro9_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,

arch/arm/mach-ep93xx/simone.c

@@ -25,7 +25,6 @@
 #include <linux/platform_data/video-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -83,8 +82,7 @@ MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= simone_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,

arch/arm/mach-ep93xx/snappercl15.c

@@ -31,7 +31,6 @@
 #include <linux/platform_data/video-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -176,8 +175,7 @@ MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer 		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= snappercl15_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,

arch/arm/mach-ep93xx/ts72xx.c

@@ -22,7 +22,6 @@
 
 #include <mach/hardware.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -246,8 +245,7 @@ MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
 	.atag_offset	= 0x100,
 	.map_io		= ts72xx_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= ts72xx_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,

arch/arm/mach-ep93xx/vision_ep9307.c

@@ -34,7 +34,6 @@
 #include <linux/platform_data/spi-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -364,8 +363,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
 	.atag_offset	= 0x100,
 	.map_io		= vision_map_io,
 	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
+	.init_time	= ep93xx_timer_init,
 	.init_machine	= vision_init_machine,
 	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,

arch/arm/mach-exynos/common.c

@@ -22,12 +22,13 @@
 #include <linux/of_irq.h>
 #include <linux/export.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip.h>
 #include <linux/of_address.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/proc-fns.h>
 #include <asm/exception.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/cacheflush.h>
@@ -644,8 +645,6 @@ static int __init combiner_of_init(struct device_node *np,
 }
 
 static const struct of_device_id exynos_dt_irq_match[] = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{ .compatible = "arm,cortex-a15-gic", .data = gic_of_init, },
 	{ .compatible = "samsung,exynos4210-combiner",
 			.data = combiner_of_init, },
 	{},
@@ -661,8 +660,10 @@ void __init exynos4_init_irq(void)
 	if (!of_have_populated_dt())
 		gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset, NULL);
 #ifdef CONFIG_OF
-	else
+	else {
+		irqchip_init();
 		of_irq_init(exynos_dt_irq_match);
+	}
 #endif
 
 	if (!of_have_populated_dt())
@@ -679,6 +680,7 @@ void __init exynos4_init_irq(void)
 void __init exynos5_init_irq(void)
 {
 #ifdef CONFIG_OF
+	irqchip_init();
 	of_irq_init(exynos_dt_irq_match);
 #endif
 	/*

arch/arm/mach-exynos/common.h

@@ -12,7 +12,7 @@
 #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
 #define __ARCH_ARM_MACH_EXYNOS_COMMON_H
 
-extern struct sys_timer exynos4_timer;
+extern void exynos4_timer_init(void);
 
 struct map_desc;
 void exynos_init_io(struct map_desc *mach_desc, int size);

arch/arm/mach-exynos/include/mach/regs-irq.h

@@ -13,7 +13,7 @@
 #ifndef __ASM_ARCH_REGS_IRQ_H
 #define __ASM_ARCH_REGS_IRQ_H __FILE__
 
-#include <asm/hardware/gic.h>
+#include <linux/irqchip/arm-gic.h>
 #include <mach/map.h>
 
 #endif /* __ASM_ARCH_REGS_IRQ_H */

arch/arm/mach-exynos/mach-armlex4210.c

@@ -16,7 +16,6 @@
 #include <linux/smsc911x.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/cpu.h>
@@ -201,9 +200,8 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
 	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= armlex4210_map_io,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= armlex4210_machine_init,
 	.init_late	= exynos_init_late,
-	.timer		= &exynos4_timer,
+	.init_time	= exynos4_timer_init,
 	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-exynos4-dt.c

@@ -15,7 +15,6 @@
 #include <linux/serial_core.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <mach/map.h>
 
 #include <plat/cpu.h>
@@ -107,10 +106,9 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= exynos4_dt_map_io,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= exynos4_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.timer		= &exynos4_timer,
+	.init_time	= exynos4_timer_init,
 	.dt_compat	= exynos4_dt_compat,
 	.restart        = exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-exynos5-dt.c

@@ -16,7 +16,6 @@
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <mach/map.h>
 #include <mach/regs-pmu.h>
 
@@ -179,10 +178,9 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
 	.init_irq	= exynos5_init_irq,
 	.smp		= smp_ops(exynos_smp_ops),
 	.map_io		= exynos5_dt_map_io,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= exynos5_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.timer		= &exynos4_timer,
+	.init_time	= exynos4_timer_init,
 	.dt_compat	= exynos5_dt_compat,
 	.restart        = exynos5_restart,
 	.reserve	= exynos5_reserve,