Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 4 年多

通知 15
Star 8
Fork 2
K
kernel_linux
提交 51991d7e 编写于 作者: T Tony Lindgren
浏览文件
操作

Merge branch 'omap-for-v4.15/fixes-dt' into omap-for-v4.16/dt

上级 1239738f bc686442
显示空白变更内容
内联 并排
Showing with 47 addition and 13 deletion
Documentation/devicetree/bindings/usb/am33xx-usb.txt
浏览文件 @ 51991d7e
...@@ -95,6 +95,7 @@ usb: usb@47400000 { ...@@ -95,6 +95,7 @@ usb: usb@47400000 {
reg = <0x47401300 0x100>; reg = <0x47401300 0x100>;
reg-names = "phy"; reg-names = "phy";
ti,ctrl_mod = <&ctrl_mod>; ti,ctrl_mod = <&ctrl_mod>;
#phy-cells = <0>;
}; };
usb0: usb@47401000 { usb0: usb@47401000 {
...@@ -141,6 +142,7 @@ usb: usb@47400000 { ...@@ -141,6 +142,7 @@ usb: usb@47400000 {
reg = <0x47401b00 0x100>; reg = <0x47401b00 0x100>;
reg-names = "phy"; reg-names = "phy";
ti,ctrl_mod = <&ctrl_mod>; ti,ctrl_mod = <&ctrl_mod>;
#phy-cells = <0>;
}; };
usb1: usb@47401800 { usb1: usb@47401800 {
......
arch/arm/boot/dts/am33xx.dtsi
浏览文件 @ 51991d7e
...@@ -630,6 +630,7 @@ ...@@ -630,6 +630,7 @@
reg-names = "phy"; reg-names = "phy";
status = "disabled"; status = "disabled";
ti,ctrl_mod = <&usb_ctrl_mod>; ti,ctrl_mod = <&usb_ctrl_mod>;
#phy-cells = <0>;
}; };
usb0: usb@47401000 { usb0: usb@47401000 {
...@@ -678,6 +679,7 @@ ...@@ -678,6 +679,7 @@
reg-names = "phy"; reg-names = "phy";
status = "disabled"; status = "disabled";
ti,ctrl_mod = <&usb_ctrl_mod>; ti,ctrl_mod = <&usb_ctrl_mod>;
#phy-cells = <0>;
}; };
usb1: usb@47401800 { usb1: usb@47401800 {
......
arch/arm/boot/dts/am4372.dtsi
浏览文件 @ 51991d7e
...@@ -927,7 +927,8 @@ ...@@ -927,7 +927,8 @@
reg = <0x48038000 0x2000>, reg = <0x48038000 0x2000>,
<0x46000000 0x400000>; <0x46000000 0x400000>;
reg-names = "mpu", "dat"; reg-names = "mpu", "dat";
interrupts = <80>, <81>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx"; interrupt-names = "tx", "rx";
status = "disabled"; status = "disabled";
dmas = <&edma 8 2>, dmas = <&edma 8 2>,
...@@ -941,7 +942,8 @@ ...@@ -941,7 +942,8 @@
reg = <0x4803C000 0x2000>, reg = <0x4803C000 0x2000>,
<0x46400000 0x400000>; <0x46400000 0x400000>;
reg-names = "mpu", "dat"; reg-names = "mpu", "dat";
interrupts = <82>, <83>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx"; interrupt-names = "tx", "rx";
status = "disabled"; status = "disabled";
dmas = <&edma 10 2>, dmas = <&edma 10 2>,
......
arch/arm/boot/dts/am437x-cm-t43.dts
浏览文件 @ 51991d7e
...@@ -301,8 +301,8 @@ ...@@ -301,8 +301,8 @@
status = "okay"; status = "okay";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>; pinctrl-0 = <&spi0_pins>;
dmas = <&edma 16 dmas = <&edma 16 0
&edma 17>; &edma 17 0>;
dma-names = "tx0", "rx0"; dma-names = "tx0", "rx0";
flash: w25q64cvzpig@0 { flash: w25q64cvzpig@0 {
......
arch/arm/boot/dts/dm814x.dtsi
浏览文件 @ 51991d7e
...@@ -75,6 +75,7 @@ ...@@ -75,6 +75,7 @@
reg = <0x47401300 0x100>; reg = <0x47401300 0x100>;
reg-names = "phy"; reg-names = "phy";
ti,ctrl_mod = <&usb_ctrl_mod>; ti,ctrl_mod = <&usb_ctrl_mod>;
#phy-cells = <0>;
}; };
usb0: usb@47401000 { usb0: usb@47401000 {
......
arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
浏览文件 @ 51991d7e
...@@ -72,7 +72,8 @@ ...@@ -72,7 +72,8 @@
}; };
&gpmc { &gpmc {
ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */ ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */
ethernet@gpmc { ethernet@gpmc {
pinctrl-names = "default"; pinctrl-names = "default";
......
arch/arm/boot/dts/logicpd-som-lv.dtsi
浏览文件 @ 51991d7e
...@@ -33,11 +33,12 @@ ...@@ -33,11 +33,12 @@
hsusb2_phy: hsusb2_phy { hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv"; compatible = "usb-nop-xceiv";
reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */ reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */
#phy-cells = <0>;
}; };
}; };
&gpmc { &gpmc {
ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 { nand@0,0 {
compatible = "ti,omap2-nand"; compatible = "ti,omap2-nand";
...@@ -94,7 +95,7 @@ ...@@ -94,7 +95,7 @@
&mmc3 { &mmc3 {
interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
pinctrl-0 = <&mmc3_pins>; pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
pinctrl-names = "default"; pinctrl-names = "default";
vmmc-supply = <&wl12xx_vmmc>; vmmc-supply = <&wl12xx_vmmc>;
non-removable; non-removable;
...@@ -105,8 +106,8 @@ ...@@ -105,8 +106,8 @@
wlcore: wlcore@2 { wlcore: wlcore@2 {
compatible = "ti,wl1273"; compatible = "ti,wl1273";
reg = <2>; reg = <2>;
interrupt-parent = <&gpio5>; interrupt-parent = <&gpio1>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 2 */
ref-clock-frequency = <26000000>; ref-clock-frequency = <26000000>;
}; };
}; };
...@@ -130,8 +131,6 @@ ...@@ -130,8 +131,6 @@
OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */
OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */
OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */ OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs2.sdmmc_clk */ OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs2.sdmmc_clk */
>; >;
...@@ -201,6 +200,12 @@ ...@@ -201,6 +200,12 @@
OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */ OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */
>; >;
}; };
wl127x_gpio: pinmux_wl127x_gpio_pin {
pinctrl-single,pins = <
OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */
OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
>;
};
}; };
&omap3_pmx_core2 { &omap3_pmx_core2 {
......
arch/arm/boot/dts/omap3-beagle-xm.dts
浏览文件 @ 51991d7e
...@@ -90,6 +90,7 @@ ...@@ -90,6 +90,7 @@
compatible = "usb-nop-xceiv"; compatible = "usb-nop-xceiv";
reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
vcc-supply = <&hsusb2_power>; vcc-supply = <&hsusb2_power>;
#phy-cells = <0>;
}; };
tfp410: encoder0 { tfp410: encoder0 {
......
arch/arm/boot/dts/omap3-beagle.dts
浏览文件 @ 51991d7e
...@@ -64,6 +64,7 @@ ...@@ -64,6 +64,7 @@
compatible = "usb-nop-xceiv"; compatible = "usb-nop-xceiv";
reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
vcc-supply = <&hsusb2_power>; vcc-supply = <&hsusb2_power>;
#phy-cells = <0>;
}; };
sound { sound {
......
arch/arm/boot/dts/omap3-cm-t3x.dtsi
浏览文件 @ 51991d7e
...@@ -43,12 +43,14 @@ ...@@ -43,12 +43,14 @@
hsusb1_phy: hsusb1_phy { hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv"; compatible = "usb-nop-xceiv";
vcc-supply = <&hsusb1_power>; vcc-supply = <&hsusb1_power>;
#phy-cells = <0>;
}; };
/* HS USB Host PHY on PORT 2 */ /* HS USB Host PHY on PORT 2 */
hsusb2_phy: hsusb2_phy { hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv"; compatible = "usb-nop-xceiv";
vcc-supply = <&hsusb2_power>; vcc-supply = <&hsusb2_power>;
#phy-cells = <0>;
}; };
ads7846reg: ads7846-reg { ads7846reg: ads7846-reg {
......
arch/arm/boot/dts/omap3-evm-common.dtsi
浏览文件 @ 51991d7e
...@@ -29,6 +29,7 @@ ...@@ -29,6 +29,7 @@
compatible = "usb-nop-xceiv"; compatible = "usb-nop-xceiv";
reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */ reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
vcc-supply = <&hsusb2_power>; vcc-supply = <&hsusb2_power>;
#phy-cells = <0>;
}; };
leds { leds {
......
arch/arm/boot/dts/omap3-gta04.dtsi
浏览文件 @ 51991d7e
...@@ -120,6 +120,7 @@ ...@@ -120,6 +120,7 @@
hsusb2_phy: hsusb2_phy { hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv"; compatible = "usb-nop-xceiv";
reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
#phy-cells = <0>;
}; };
tv0: connector { tv0: connector {
......
arch/arm/boot/dts/omap3-igep0020-common.dtsi
浏览文件 @ 51991d7e
...@@ -58,6 +58,7 @@ ...@@ -58,6 +58,7 @@
compatible = "usb-nop-xceiv"; compatible = "usb-nop-xceiv";
reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */ reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
vcc-supply = <&hsusb1_power>; vcc-supply = <&hsusb1_power>;
#phy-cells = <0>;
}; };
tfp410: encoder { tfp410: encoder {
......
arch/arm/boot/dts/omap3-igep0030-common.dtsi
浏览文件 @ 51991d7e
...@@ -37,6 +37,7 @@ ...@@ -37,6 +37,7 @@
hsusb2_phy: hsusb2_phy { hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv"; compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */ reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */
#phy-cells = <0>;
}; };
}; };
......
arch/arm/boot/dts/omap3-lilly-a83x.dtsi
浏览文件 @ 51991d7e
...@@ -51,6 +51,7 @@ ...@@ -51,6 +51,7 @@
hsusb1_phy: hsusb1_phy { hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv"; compatible = "usb-nop-xceiv";
vcc-supply = <&reg_vcc3>; vcc-supply = <&reg_vcc3>;
#phy-cells = <0>;
}; };
}; };
......
arch/arm/boot/dts/omap3-overo-base.dtsi
浏览文件 @ 51991d7e
...@@ -51,6 +51,7 @@ ...@@ -51,6 +51,7 @@
compatible = "usb-nop-xceiv"; compatible = "usb-nop-xceiv";
reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>; /* gpio_183 */ reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>; /* gpio_183 */
vcc-supply = <&hsusb2_power>; vcc-supply = <&hsusb2_power>;
#phy-cells = <0>;
}; };
/* Regulator to trigger the nPoweron signal of the Wifi module */ /* Regulator to trigger the nPoweron signal of the Wifi module */
......
arch/arm/boot/dts/omap3-pandora-common.dtsi
浏览文件 @ 51991d7e
...@@ -205,6 +205,7 @@ ...@@ -205,6 +205,7 @@
compatible = "usb-nop-xceiv"; compatible = "usb-nop-xceiv";
reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */ reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */
vcc-supply = <&vaux2>; vcc-supply = <&vaux2>;
#phy-cells = <0>;
}; };
/* HS USB Host VBUS supply /* HS USB Host VBUS supply
......
arch/arm/boot/dts/omap3-tao3530.dtsi
浏览文件 @ 51991d7e
...@@ -46,6 +46,7 @@ ...@@ -46,6 +46,7 @@
compatible = "usb-nop-xceiv"; compatible = "usb-nop-xceiv";
reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* gpio_162 */ reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* gpio_162 */
vcc-supply = <&hsusb2_power>; vcc-supply = <&hsusb2_power>;
#phy-cells = <0>;
}; };
sound { sound {
......
arch/arm/boot/dts/omap3.dtsi
浏览文件 @ 51991d7e
...@@ -715,6 +715,7 @@ ...@@ -715,6 +715,7 @@
compatible = "ti,ohci-omap3"; compatible = "ti,ohci-omap3";
reg = <0x48064400 0x400>; reg = <0x48064400 0x400>;
interrupts = <76>; interrupts = <76>;
remote-wakeup-connected;
}; };
usbhsehci: ehci@48064800 { usbhsehci: ehci@48064800 {
......
arch/arm/boot/dts/omap4-droid4-xt894.dts
浏览文件 @ 51991d7e
...@@ -73,6 +73,7 @@ ...@@ -73,6 +73,7 @@
/* HS USB Host PHY on PORT 1 */ /* HS USB Host PHY on PORT 1 */
hsusb1_phy: hsusb1_phy { hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv"; compatible = "usb-nop-xceiv";
#phy-cells = <0>;
}; };
/* LCD regulator from sw5 source */ /* LCD regulator from sw5 source */
......
arch/arm/boot/dts/omap4-duovero.dtsi
浏览文件 @ 51991d7e
...@@ -43,6 +43,7 @@ ...@@ -43,6 +43,7 @@
hsusb1_phy: hsusb1_phy { hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv"; compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */ reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
#phy-cells = <0>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&hsusb1phy_pins>; pinctrl-0 = <&hsusb1phy_pins>;
......
arch/arm/boot/dts/omap4-panda-common.dtsi
浏览文件 @ 51991d7e
...@@ -89,6 +89,7 @@ ...@@ -89,6 +89,7 @@
hsusb1_phy: hsusb1_phy { hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv"; compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */ reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
#phy-cells = <0>;
vcc-supply = <&hsusb1_power>; vcc-supply = <&hsusb1_power>;
clocks = <&auxclk3_ck>; clocks = <&auxclk3_ck>;
clock-names = "main_clk"; clock-names = "main_clk";
......
arch/arm/boot/dts/omap4-var-som-om44.dtsi
浏览文件 @ 51991d7e
...@@ -44,6 +44,7 @@ ...@@ -44,6 +44,7 @@
reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */ reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */
vcc-supply = <&vbat>; vcc-supply = <&vbat>;
#phy-cells = <0>;
clocks = <&auxclk3_ck>; clocks = <&auxclk3_ck>;
clock-names = "main_clk"; clock-names = "main_clk";
......
arch/arm/boot/dts/omap4.dtsi
浏览文件 @ 51991d7e
...@@ -1081,14 +1081,13 @@ ...@@ -1081,14 +1081,13 @@
usbhsohci: ohci@4a064800 { usbhsohci: ohci@4a064800 {
compatible = "ti,ohci-omap3"; compatible = "ti,ohci-omap3";
reg = <0x4a064800 0x400>; reg = <0x4a064800 0x400>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
remote-wakeup-connected;
}; };
usbhsehci: ehci@4a064c00 { usbhsehci: ehci@4a064c00 {
compatible = "ti,ehci-omap"; compatible = "ti,ehci-omap";
reg = <0x4a064c00 0x400>; reg = <0x4a064c00 0x400>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
}; };
}; };
......
arch/arm/boot/dts/omap5-board-common.dtsi
浏览文件 @ 51991d7e
...@@ -73,12 +73,14 @@ ...@@ -73,12 +73,14 @@
clocks = <&auxclk1_ck>; clocks = <&auxclk1_ck>;
clock-names = "main_clk"; clock-names = "main_clk";
clock-frequency = <19200000>; clock-frequency = <19200000>;
#phy-cells = <0>;
}; };
/* HS USB Host PHY on PORT 3 */ /* HS USB Host PHY on PORT 3 */
hsusb3_phy: hsusb3_phy { hsusb3_phy: hsusb3_phy {
compatible = "usb-nop-xceiv"; compatible = "usb-nop-xceiv";
reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */ reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
#phy-cells = <0>;
}; };
tpd12s015: encoder { tpd12s015: encoder {
......
arch/arm/boot/dts/omap5-cm-t54.dts
浏览文件 @ 51991d7e
...@@ -63,12 +63,14 @@ ...@@ -63,12 +63,14 @@
hsusb2_phy: hsusb2_phy { hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv"; compatible = "usb-nop-xceiv";
reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */ reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */
#phy-cells = <0>;
}; };
/* HS USB Host PHY on PORT 3 */ /* HS USB Host PHY on PORT 3 */
hsusb3_phy: hsusb3_phy { hsusb3_phy: hsusb3_phy {
compatible = "usb-nop-xceiv"; compatible = "usb-nop-xceiv";
reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */ reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */
#phy-cells = <0>;
}; };
leds { leds {
......
arch/arm/boot/dts/omap5.dtsi
浏览文件 @ 51991d7e
...@@ -940,6 +940,7 @@ ...@@ -940,6 +940,7 @@
compatible = "ti,ohci-omap3"; compatible = "ti,ohci-omap3";
reg = <0x4a064800 0x400>; reg = <0x4a064800 0x400>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
remote-wakeup-connected;
}; };
usbhsehci: ehci@4a064c00 { usbhsehci: ehci@4a064c00 {
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或