Merge branch 'linux-2.6' into next

Documentation/cciss.txt

@@ -21,11 +21,14 @@ This driver is known to work with the following cards:
 	* SA E200
 	* SA E200i
 	* SA E500
+	* SA P700m
 	* SA P212
 	* SA P410
 	* SA P410i
 	* SA P411
 	* SA P812
+	* SA P712m
+	* SA P711m
 
 Detecting drive failures:
 -------------------------

Documentation/email-clients.txt

@@ -213,4 +213,29 @@ TkRat (GUI)
 
 Works.  Use "Insert file..." or external editor.
 
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Gmail (Web GUI)
+
+If you just have to use Gmail to send patches, it CAN be made to work.  It
+requires a bit of external help, though.
+
+The first problem is that Gmail converts tabs to spaces.  This will
+totally break your patches.  To prevent this, you have to use a different
+editor.  There is a firefox extension called "ViewSourceWith"
+(https://addons.mozilla.org/en-US/firefox/addon/394) which allows you to
+edit any text box in the editor of your choice.  Configure it to launch
+your favorite editor.  When you want to send a patch, use this technique.
+Once you have crafted your messsage + patch, save and exit the editor,
+which should reload the Gmail edit box.  GMAIL WILL PRESERVE THE TABS.
+Hoorah.  Apparently you can cut-n-paste literal tabs, but Gmail will
+convert those to spaces upon sending!
+
+The second problem is that Gmail converts tabs to spaces on replies.  If
+you reply to a patch, don't expect to be able to apply it as a patch.
+
+The last problem is that Gmail will base64-encode any message that has a
+non-ASCII character.  That includes things like European names.  Be aware.
+
+Gmail is not convenient for lkml patches, but CAN be made to work.
+
                                 ###

Documentation/feature-removal-schedule.txt

@@ -56,30 +56,6 @@ Who:	Mauro Carvalho Chehab <mchehab@infradead.org>
 
 ---------------------------
 
-What:	old tuner-3036 i2c driver
-When:	2.6.28
-Why:	This driver is for VERY old i2c-over-parallel port teletext receiver
-	boxes. Rather then spending effort on converting this driver to V4L2,
-	and since it is extremely unlikely that anyone still uses one of these
-	devices, it was decided to drop it.
-Who:	Hans Verkuil <hverkuil@xs4all.nl>
-	Mauro Carvalho Chehab <mchehab@infradead.org>
-
- ---------------------------
-
-What:   V4L2 dpc7146 driver
-When:   2.6.28
-Why:    Old driver for the dpc7146 demonstration board that is no longer
-	relevant. The last time this was tested on actual hardware was
-	probably around 2002. Since this is a driver for a demonstration
-	board the decision was made to remove it rather than spending a
-	lot of effort continually updating this driver to stay in sync
-	with the latest internal V4L2 or I2C API.
-Who:    Hans Verkuil <hverkuil@xs4all.nl>
-	Mauro Carvalho Chehab <mchehab@infradead.org>
-
----------------------------
-
 What:	PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
 When:	November 2005
 Files:	drivers/pcmcia/: pcmcia_ioctl.c

Documentation/filesystems/vfat.txt

@@ -8,6 +8,12 @@ if you want to format from within Linux.
 
 VFAT MOUNT OPTIONS
 ----------------------------------------------------------------------
+uid=###       -- Set the owner of all files on this filesystem.
+		 The default is the uid of current process.
+
+gid=###       -- Set the group of all files on this filesystem.
+		 The default is the gid of current process.
+
 umask=###     -- The permission mask (for files and directories, see umask(1)).
                  The default is the umask of current process.
 
@@ -36,7 +42,7 @@ codepage=###  -- Sets the codepage number for converting to shortname
 		 characters on FAT filesystem.
 		 By default, FAT_DEFAULT_CODEPAGE setting is used.
 
-iocharset=name -- Character set to use for converting between the
+iocharset=<name> -- Character set to use for converting between the
 		 encoding is used for user visible filename and 16 bit
 		 Unicode characters. Long filenames are stored on disk
 		 in Unicode format, but Unix for the most part doesn't
@@ -86,6 +92,8 @@ check=s|r|n   -- Case sensitivity checking setting.
                  r: relaxed, case insensitive
                  n: normal, default setting, currently case insensitive
 
+nocase        -- This was deprecated for vfat. Use shortname=win95 instead.
+
 shortname=lower|win95|winnt|mixed
 	      -- Shortname display/create setting.
 		 lower: convert to lowercase for display,
@@ -99,11 +107,31 @@ shortname=lower|win95|winnt|mixed
 tz=UTC        -- Interpret timestamps as UTC rather than local time.
                  This option disables the conversion of timestamps
                  between local time (as used by Windows on FAT) and UTC
-                 (which Linux uses internally).  This is particuluarly
+                 (which Linux uses internally).  This is particularly
                  useful when mounting devices (like digital cameras)
                  that are set to UTC in order to avoid the pitfalls of
                  local time.
 
+showexec      -- If set, the execute permission bits of the file will be
+		 allowed only if the extension part of the name is .EXE,
+		 .COM, or .BAT. Not set by default.
+
+debug         -- Can be set, but unused by the current implementation.
+
+sys_immutable -- If set, ATTR_SYS attribute on FAT is handled as
+		 IMMUTABLE flag on Linux. Not set by default.
+
+flush         -- If set, the filesystem will try to flush to disk more
+		 early than normal. Not set by default.
+
+rodir	      -- FAT has the ATTR_RO (read-only) attribute. But on Windows,
+		 the ATTR_RO of the directory will be just ignored actually,
+		 and is used by only applications as flag. E.g. it's setted
+		 for the customized folder.
+
+		 If you want to use ATTR_RO as read-only flag even for
+		 the directory, set this option.
+
 <bool>: 0,1,yes,no,true,false
 
 TODO

Documentation/ftrace.txt

@@ -8,7 +8,7 @@ Copyright 2008 Red Hat Inc.
 Reviewers:   Elias Oltmanns, Randy Dunlap, Andrew Morton,
 	     John Kacur, and David Teigland.
 
-Written for: 2.6.27-rc1
+Written for: 2.6.28-rc2
 
 Introduction
 ------------
@@ -50,26 +50,26 @@ of ftrace. Here is a list of some of the key files:
 
  Note: all time values are in microseconds.
 
-  current_tracer : This is used to set or display the current tracer
+  current_tracer: This is used to set or display the current tracer
 		that is configured.
 
-  available_tracers : This holds the different types of tracers that
+  available_tracers: This holds the different types of tracers that
 		have been compiled into the kernel. The tracers
 		listed here can be configured by echoing their name
 		into current_tracer.
 
-  tracing_enabled : This sets or displays whether the current_tracer
+  tracing_enabled: This sets or displays whether the current_tracer
 		is activated and tracing or not. Echo 0 into this
 		file to disable the tracer or 1 to enable it.
 
-  trace : This file holds the output of the trace in a human readable
+  trace: This file holds the output of the trace in a human readable
 		format (described below).
 
-  latency_trace : This file shows the same trace but the information
+  latency_trace: This file shows the same trace but the information
 		is organized more to display possible latencies
 		in the system (described below).
 
-  trace_pipe : The output is the same as the "trace" file but this
+  trace_pipe: The output is the same as the "trace" file but this
 		file is meant to be streamed with live tracing.
 		Reads from this file will block until new data
 		is retrieved. Unlike the "trace" and "latency_trace"
@@ -82,11 +82,11 @@ of ftrace. Here is a list of some of the key files:
 		tracer is not adding more data, they will display
 		the same information every time they are read.
 
-  iter_ctrl : This file lets the user control the amount of data
+  iter_ctrl: This file lets the user control the amount of data
 		that is displayed in one of the above output
 		files.
 
-  trace_max_latency : Some of the tracers record the max latency.
+  trace_max_latency: Some of the tracers record the max latency.
 		For example, the time interrupts are disabled.
 		This time is saved in this file. The max trace
 		will also be stored, and displayed by either
@@ -94,29 +94,26 @@ of ftrace. Here is a list of some of the key files:
 		only be recorded if the latency is greater than
 		the value in this file. (in microseconds)
 
-  trace_entries : This sets or displays the number of trace
-		entries each CPU buffer can hold. The tracer buffers
-		are the same size for each CPU. The displayed number
-		is the size of the CPU buffer and not total size. The
+  trace_entries: This sets or displays the number of bytes each CPU
+		buffer can hold. The tracer buffers are the same size
+		for each CPU. The displayed number is the size of the
+		 CPU buffer and not total size of all buffers. The
 		trace buffers are allocated in pages (blocks of memory
 		that the kernel uses for allocation, usually 4 KB in size).
-		Since each entry is smaller than a page, if the last
-		allocated page has room for more entries than were
-		requested, the rest of the page is used to allocate
-		entries.
+		If the last page allocated has room for more bytes
+		than requested, the rest of the page will be used,
+		making the actual allocation bigger than requested.
+		(Note, the size may not be a multiple of the page size due
+		to buffer managment overhead.)
 
 		This can only be updated when the current_tracer
-		is set to "none".
+		is set to "nop".
 
-		NOTE: It is planned on changing the allocated buffers
-		      from being the number of possible CPUS to
-		      the number of online CPUS.
-
-  tracing_cpumask : This is a mask that lets the user only trace
+  tracing_cpumask: This is a mask that lets the user only trace
 		on specified CPUS. The format is a hex string
 		representing the CPUS.
 
-  set_ftrace_filter : When dynamic ftrace is configured in (see the
+  set_ftrace_filter: When dynamic ftrace is configured in (see the
 		section below "dynamic ftrace"), the code is dynamically
 		modified (code text rewrite) to disable calling of the
 		function profiler (mcount). This lets tracing be configured
@@ -130,14 +127,11 @@ of ftrace. Here is a list of some of the key files:
 		be traced. If a function exists in both set_ftrace_filter
 		and set_ftrace_notrace,	the function will _not_ be traced.
 
-  available_filter_functions : When a function is encountered the first
-		time by the dynamic tracer, it is recorded and
-		later the call is converted into a nop. This file
-		lists the functions that have been recorded
-		by the dynamic tracer and these functions can
-		be used to set the ftrace filter by the above
-		"set_ftrace_filter" file. (See the section "dynamic ftrace"
-		below for more details).
+  available_filter_functions: This lists the functions that ftrace
+		has processed and can trace. These are the function
+		names that you can pass to "set_ftrace_filter" or
+		"set_ftrace_notrace". (See the section "dynamic ftrace"
+		below for more details.)
 
 
 The Tracers
@@ -145,7 +139,7 @@ The Tracers
 
 Here is the list of current tracers that may be configured.
 
-  ftrace - function tracer that uses mcount to trace all functions.
+  function - function tracer that uses mcount to trace all functions.
 
   sched_switch - traces the context switches between tasks.
 
@@ -166,8 +160,8 @@ Here is the list of current tracers that may be configured.
 		the highest priority task to get scheduled after
 		it has been woken up.
 
-  none - This is not a tracer. To remove all tracers from tracing
-		simply echo "none" into current_tracer.
+  nop - This is not a tracer. To remove all tracers from tracing
+		simply echo "nop" into current_tracer.
 
 
 Examples of using the tracer
@@ -182,7 +176,7 @@ Output format:
 Here is an example of the output format of the file "trace"
 
                              --------
-# tracer: ftrace
+# tracer: function
 #
 #           TASK-PID   CPU#    TIMESTAMP  FUNCTION
 #              | |      |          |         |
@@ -192,7 +186,7 @@ Here is an example of the output format of the file "trace"
                              --------
 
 A header is printed with the tracer name that is represented by the trace.
-In this case the tracer is "ftrace". Then a header showing the format. Task
+In this case the tracer is "function". Then a header showing the format. Task
 name "bash", the task PID "4251", the CPU that it was running on
 "01", the timestamp in <secs>.<usecs> format, the function name that was
 traced "path_put" and the parent function that called this function
@@ -1003,22 +997,20 @@ is the stack for the hard interrupt. This hides the fact that NEED_RESCHED
 has been set. We do not see the 'N' until we switch back to the task's
 assigned stack.
 
-ftrace
-------
+function
+--------
 
-ftrace is not only the name of the tracing infrastructure, but it
-is also a name of one of the tracers. The tracer is the function
-tracer. Enabling the function tracer can be done from the
-debug file system. Make sure the ftrace_enabled is set otherwise
-this tracer is a nop.
+This tracer is the function tracer. Enabling the function tracer
+can be done from the debug file system. Make sure the ftrace_enabled is
+set; otherwise this tracer is a nop.
 
  # sysctl kernel.ftrace_enabled=1
- # echo ftrace > /debug/tracing/current_tracer
+ # echo function > /debug/tracing/current_tracer
  # echo 1 > /debug/tracing/tracing_enabled
  # usleep 1
  # echo 0 > /debug/tracing/tracing_enabled
  # cat /debug/tracing/trace
-# tracer: ftrace
+# tracer: function
 #
 #           TASK-PID   CPU#    TIMESTAMP  FUNCTION
 #              | |      |          |         |
@@ -1040,10 +1032,10 @@ this tracer is a nop.
 [...]
 
 
-Note: ftrace uses ring buffers to store the above entries. The newest data
-may overwrite the oldest data. Sometimes using echo to stop the trace
-is not sufficient because the tracing could have overwritten the data
-that you wanted to record. For this reason, it is sometimes better to
+Note: function tracer uses ring buffers to store the above entries.
+The newest data may overwrite the oldest data. Sometimes using echo to
+stop the trace is not sufficient because the tracing could have overwritten
+the data that you wanted to record. For this reason, it is sometimes better to
 disable tracing directly from a program. This allows you to stop the
 tracing at the point that you hit the part that you are interested in.
 To disable the tracing directly from a C program, something like following
@@ -1077,18 +1069,31 @@ every kernel function, produced by the -pg switch in gcc), starts
 of pointing to a simple return. (Enabling FTRACE will include the
 -pg switch in the compiling of the kernel.)
 
-When dynamic ftrace is initialized, it calls kstop_machine to make
-the machine act like a uniprocessor so that it can freely modify code
-without worrying about other processors executing that same code.  At
-initialization, the mcount calls are changed to call a "record_ip"
-function.  After this, the first time a kernel function is called,
-it has the calling address saved in a hash table.
-
-Later on the ftraced kernel thread is awoken and will again call
-kstop_machine if new functions have been recorded. The ftraced thread
-will change all calls to mcount to "nop".  Just calling mcount
-and having mcount return has shown a 10% overhead. By converting
-it to a nop, there is no measurable overhead to the system.
+At compile time every C file object is run through the
+recordmcount.pl script (located in the scripts directory). This
+script will process the C object using objdump to find all the
+locations in the .text section that call mcount. (Note, only
+the .text section is processed, since processing other sections
+like .init.text may cause races due to those sections being freed).
+
+A new section called "__mcount_loc" is created that holds references
+to all the mcount call sites in the .text section. This section is
+compiled back into the original object. The final linker will add
+all these references into a single table.
+
+On boot up, before SMP is initialized, the dynamic ftrace code
+scans this table and updates all the locations into nops. It also
+records the locations, which are added to the available_filter_functions
+list.  Modules are processed as they are loaded and before they are
+executed.  When a module is unloaded, it also removes its functions from
+the ftrace function list. This is automatic in the module unload
+code, and the module author does not need to worry about it.
+
+When tracing is enabled, kstop_machine is called to prevent races
+with the CPUS executing code being modified (which can cause the
+CPU to do undesireable things), and the nops are patched back
+to calls. But this time, they do not call mcount (which is just
+a function stub). They now call into the ftrace infrastructure.
 
 One special side-effect to the recording of the functions being
 traced is that we can now selectively choose which functions we
@@ -1251,36 +1256,6 @@ Produces:
 
 We can see that there's no more lock or preempt tracing.
 
-ftraced
--------
-
-As mentioned above, when dynamic ftrace is configured in, a kernel
-thread wakes up once a second and checks to see if there are mcount
-calls that need to be converted into nops. If there are not any, then
-it simply goes back to sleep. But if there are some, it will call
-kstop_machine to convert the calls to nops.
-
-There may be a case in which you do not want this added latency.
-Perhaps you are doing some audio recording and this activity might
-cause skips in the playback. There is an interface to disable
-and enable the "ftraced" kernel thread.
-
- # echo 0 > /debug/tracing/ftraced_enabled
-
-This will disable the calling of kstop_machine to update the
-mcount calls to nops. Remember that there is a large overhead
-to calling mcount. Without this kernel thread, that overhead will
-exist.
-
-If there are recorded calls to mcount, any write to the ftraced_enabled
-file will cause the kstop_machine to run. This means that a
-user can manually perform the updates when they want to by simply
-echoing a '0' into the ftraced_enabled file.
-
-The updates are also done at the beginning of enabling a tracer
-that uses ftrace function recording.
-
-
 trace_pipe
 ----------
 
@@ -1289,14 +1264,14 @@ on the tracing is different. Every read from trace_pipe is consumed.
 This means that subsequent reads will be different. The trace
 is live.
 
- # echo ftrace > /debug/tracing/current_tracer
+ # echo function > /debug/tracing/current_tracer
  # cat /debug/tracing/trace_pipe > /tmp/trace.out &
 [1] 4153
  # echo 1 > /debug/tracing/tracing_enabled
  # usleep 1
  # echo 0 > /debug/tracing/tracing_enabled
  # cat /debug/tracing/trace
-# tracer: ftrace
+# tracer: function
 #
 #           TASK-PID   CPU#    TIMESTAMP  FUNCTION
 #              | |      |          |         |
@@ -1317,7 +1292,7 @@ is live.
 
 Note, reading the trace_pipe file will block until more input is added.
 By changing the tracer, trace_pipe will issue an EOF. We needed
-to set the ftrace tracer _before_ cating the trace_pipe file.
+to set the function tracer _before_ we "cat" the trace_pipe file.
 
 
 trace entries
@@ -1334,10 +1309,10 @@ number of entries.
 65620
 
 Note, to modify this, you must have tracing completely disabled. To do that,
-echo "none" into the current_tracer. If the current_tracer is not set
-to "none", an EINVAL error will be returned.
+echo "nop" into the current_tracer. If the current_tracer is not set
+to "nop", an EINVAL error will be returned.
 
- # echo none > /debug/tracing/current_tracer
+ # echo nop > /debug/tracing/current_tracer
  # echo 100000 > /debug/tracing/trace_entries
  # cat /debug/tracing/trace_entries
 100045

Documentation/kernel-parameters.txt

@@ -995,13 +995,15 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format:
 			<cpu number>,...,<cpu number>
 			or
-			<cpu number>-<cpu number>  (must be a positive range in ascending order)
+			<cpu number>-<cpu number>
+			(must be a positive range in ascending order)
 			or a mixture
 			<cpu number>,...,<cpu number>-<cpu number>
+
 			This option can be used to specify one or more CPUs
 			to isolate from the general SMP balancing and scheduling
-			algorithms. The only way to move a process onto or off
-			an "isolated" CPU is via the CPU affinity syscalls.
+			algorithms. You can move a process onto or off an
+			"isolated" CPU via the CPU affinity syscalls or cpuset.
 			<cpu number> begins at 0 and the maximum value is
 			"number of CPUs in system - 1".
 
@@ -1470,8 +1472,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			Valid arguments: on, off
 			Default: on
 
-	noirqbalance	[X86-32,SMP,KNL] Disable kernel irq balancing
-
 	noirqdebug	[X86-32] Disables the code which attempts to detect and
 			disable unhandled interrupt sources.
 

Documentation/powerpc/booting-without-of.txt

@@ -41,25 +41,14 @@ Table of Contents
   VI - System-on-a-chip devices and nodes
     1) Defining child nodes of an SOC
     2) Representing devices without a current OF specification
-      a) MDIO IO device
-      b) Gianfar-compatible ethernet nodes
-      c) PHY nodes
-      d) Interrupt controllers
-      e) I2C
-      f) Freescale SOC USB controllers
-      g) Freescale SOC SEC Security Engines
-      h) Board Control and Status (BCSR)
-      i) Freescale QUICC Engine module (QE)
-      j) CFI or JEDEC memory-mapped NOR flash
-      k) Global Utilities Block
-      l) Freescale Communications Processor Module
-      m) Chipselect/Local Bus
-      n) 4xx/Axon EMAC ethernet nodes
-      o) Xilinx IP cores
-      p) Freescale Synchronous Serial Interface
-	  q) USB EHCI controllers
-      r) MDIO on GPIOs
-      s) SPI busses
+      a) PHY nodes
+      b) Interrupt controllers
+      c) CFI or JEDEC memory-mapped NOR flash
+      d) 4xx/Axon EMAC ethernet nodes
+      e) Xilinx IP cores
+      f) USB EHCI controllers
+      g) MDIO on GPIOs
+      h) SPI busses
 
   VII - Marvell Discovery mv64[345]6x System Controller chips
     1) The /system-controller node
@@ -1830,41 +1819,7 @@ platforms are moved over to use the flattened-device-tree model.
 		   big-endian;
 	   };
 
-    r) Freescale Display Interface Unit
-
-    The Freescale DIU is a LCD controller, with proper hardware, it can also
-    drive DVI monitors.
-
-    Required properties:
-    - compatible : should be "fsl-diu".
-    - reg : should contain at least address and length of the DIU register
-      set.
-    - Interrupts : one DIU interrupt should be describe here.
-
-    Example (MPC8610HPCD)
-	display@2c000 {
-		compatible = "fsl,diu";
-		reg = <0x2c000 100>;
-		interrupts = <72 2>;
-		interrupt-parent = <&mpic>;
-	};
-
-    s) Freescale on board FPGA
-
-    This is the memory-mapped registers for on board FPGA.
-
-    Required properities:
-    - compatible : should be "fsl,fpga-pixis".
-    - reg : should contain the address and the lenght of the FPPGA register
-      set.
-
-    Example (MPC8610HPCD)
-	board-control@e8000000 {
-		compatible = "fsl,fpga-pixis";
-		reg = <0xe8000000 32>;
-	};
-
-   r) MDIO on GPIOs
+   g) MDIO on GPIOs
 
    Currently defined compatibles:
    - virtual,gpio-mdio
@@ -1884,7 +1839,7 @@ platforms are moved over to use the flattened-device-tree model.
 			 &qe_pio_c 6>;
 	};
 
-    s) SPI (Serial Peripheral Interface) busses
+    h) SPI (Serial Peripheral Interface) busses
 
     SPI busses can be described with a node for the SPI master device
     and a set of child nodes for each SPI slave on the bus.  For this

Documentation/video4linux/README.cx88

@@ -27,8 +27,8 @@ audio
 	  sound card) should be possible, but there is no code yet ...
 
 vbi
-	- some code present.  Doesn't crash any more, but also doesn't
-	  work yet ...
+	- Code present. Works for NTSC closed caption. PAL and other
+	  TV norms may or may not work.
 
 
 how to add support for new cards

Documentation/video4linux/si470x.txt

+Driver for USB radios for the Silicon Labs Si470x FM Radio Receivers
+
+Copyright (c) 2008 Tobias Lorenz <tobias.lorenz@gmx.net>
+
+
+Information from Silicon Labs
+=============================
+Silicon Laboratories is the manufacturer of the radio ICs, that nowadays are the
+most often used radio receivers in cell phones. Usually they are connected with
+I2C. But SiLabs also provides a reference design, which integrates this IC,
+together with a small microcontroller C8051F321, to form a USB radio.
+Part of this reference design is also a radio application in binary and source
+code. The software also contains an automatic firmware upgrade to the most
+current version. Information on these can be downloaded here:
+http://www.silabs.com/usbradio
+
+
+Supported ICs
+=============
+The following ICs have a very similar register set, so that they are or will be
+supported somewhen by the driver:
+- Si4700: FM radio receiver
+- Si4701: FM radio receiver, RDS Support
+- Si4702: FM radio receiver
+- Si4703: FM radio receiver, RDS Support
+- Si4704: FM radio receiver, no external antenna required
+- Si4705: FM radio receiver, no external antenna required, RDS support, Dig I/O
+- Si4706: Enhanced FM RDS/TMC radio receiver, no external antenna required, RDS
+	  Support
+- Si4707: Dedicated weather band radio receiver with SAME decoder, RDS Support
+- Si4708: Smallest FM receivers
+- Si4709: Smallest FM receivers, RDS Support
+More information on these can be downloaded here:
+http://www.silabs.com/products/mcu/Pages/USBFMRadioRD.aspx
+
+
+Supported USB devices
+=====================
+Currently the following USB radios (vendor:product) with the Silicon Labs si470x
+chips are known to work:
+- 10c4:818a: Silicon Labs USB FM Radio Reference Design
+- 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF)
+- 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700)
+
+
+Software
+========
+Testing is usually done with most application under Debian/testing:
+- fmtools - Utility for managing FM tuner cards
+- gnomeradio - FM-radio tuner for the GNOME desktop
+- gradio - GTK FM radio tuner
+- kradio - Comfortable Radio Application for KDE
+- radio - ncurses-based radio application
+
+There is also a library libv4l, which can be used. It's going to have a function
+for frequency seeking, either by using hardware functionality as in radio-si470x
+or by implementing a function as we currently have in every of the mentioned
+programs. Somewhen the radio programs should make use of libv4l.
+
+For processing RDS information, there is a project ongoing at:
+http://rdsd.berlios.de/
+
+There is currently no project for making TMC sentences human readable.
+
+
+Audio Listing
+=============
+USB Audio is provided by the ALSA snd_usb_audio module. It is recommended to
+also select SND_USB_AUDIO, as this is required to get sound from the radio. For
+listing you have to redirect the sound, for example using one of the following
+commands.
+
+If you just want to test audio (very poor quality):
+cat /dev/dsp1 > /dev/dsp
+
+If you use OSS try:
+sox -2 --endian little -r 96000 -t oss /dev/dsp1 -t oss /dev/dsp
+
+If you use arts try:
+arecord -D hw:1,0 -r96000 -c2 -f S16_LE | artsdsp aplay -B -
+
+
+Module Parameters
+=================
+After loading the module, you still have access to some of them in the sysfs
+mount under /sys/module/radio_si470x/parameters. The contents of read-only files
+(0444) are not updated, even if space, band and de are changed using private
+video controls. The others are runtime changeable.
+
+
+Errors
+======
+Increase tune_timeout, if you often get -EIO errors.
+
+When timed out or band limit is reached, hw_freq_seek returns -EAGAIN.
+
+If you get any errors from snd_usb_audio, please report them to the ALSA people.
+
+
+Open Issues
+===========
+V4L minor device allocation and parameter setting is not perfect. A solution is
+currently under discussion.
+
+There is an USB interface for downloading/uploading new firmware images. Support
+for it can be implemented using the request_firmware interface.
+
+There is a RDS interrupt mode. The driver is already using the same interface
+for polling RDS information, but is currently not using the interrupt mode.
+
+There is a LED interface, which can be used to override the LED control
+programmed in the firmware. This can be made available using the LED support
+functions in the kernel.
+
+
+Other useful information and links
+==================================
+http://www.silabs.com/usbradio

MAINTAINERS

@@ -721,7 +721,7 @@ W:	http://sourceforge.net/projects/acpi4asus
 W:	http://xf.iksaif.net/acpi4asus
 S:	Maintained
 
-ASYNCHRONOUS TRANSFERS/TRANSFORMS API
+ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
 P:	Dan Williams
 M:	dan.j.williams@intel.com
 P:	Maciej Sosnowski
@@ -1879,6 +1879,37 @@ M:	linux-kernel@vger.kernel.org
 W:	http://www.kernel.org/pub/linux/kernel/people/rml/hdaps/
 S:	Maintained
 
+GSPCA FINEPIX SUBDRIVER
+P:	Frank Zago
+M:	frank@zago.net
+L:	video4linux-list@redhat.com
+S:	Maintained
+
+GSPCA M5602 SUBDRIVER
+P:	Erik Andren
+M:	erik.andren@gmail.com
+L:	video4linux-list@redhat.com
+S:	Maintained
+
+GSPCA PAC207 SONIXB SUBDRIVER
+P:	Hans de Goede
+M:	hdegoede@redhat.com
+L:	video4linux-list@redhat.com
+S:	Maintained
+
+GSPCA T613 SUBDRIVER
+P:	Leandro Costantino
+M:	lcostantino@gmail.com
+L:	video4linux-list@redhat.com
+S:	Maintained
+
+GSPCA USB WEBCAM DRIVER
+P:	Jean-Francois Moine
+M:	moinejf@free.fr
+W:	http://moinejf.free.fr
+L:	video4linux-list@redhat.com
+S:	Maintained
+
 HARDWARE MONITORING
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 28
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Killer Bat of Doom
 
 # *DOCUMENTATION*

arch/Kconfig

@@ -21,7 +21,7 @@ config OPROFILE_IBS
           Instruction-Based Sampling (IBS) is a new profiling
           technique that provides rich, precise program performance
           information. IBS is introduced by AMD Family10h processors
-          (AMD Opteron Quad-Core processor “Barcelona”) to overcome
+          (AMD Opteron Quad-Core processor "Barcelona") to overcome
           the limitations of conventional performance counter
           sampling.
 

arch/arm/include/asm/memory.h

@@ -44,10 +44,10 @@
  * The module space lives between the addresses given by TASK_SIZE
  * and PAGE_OFFSET - it must be within 32MB of the kernel text.
  */
-#define MODULE_END		(PAGE_OFFSET)
-#define MODULE_START		(MODULE_END - 16*1048576)
+#define MODULES_END		(PAGE_OFFSET)
+#define MODULES_VADDR		(MODULES_END - 16*1048576)
 
-#if TASK_SIZE > MODULE_START
+#if TASK_SIZE > MODULES_VADDR
 #error Top of user space clashes with start of module space
 #endif
 
@@ -56,7 +56,7 @@
  * Since we use sections to map it, this macro replaces the physical address
  * with its virtual address while keeping offset from the base section.
  */
-#define XIP_VIRT_ADDR(physaddr)  (MODULE_START + ((physaddr) & 0x000fffff))
+#define XIP_VIRT_ADDR(physaddr)  (MODULES_VADDR + ((physaddr) & 0x000fffff))
 
 /*
  * Allow 16MB-aligned ioremap pages
@@ -94,8 +94,8 @@
 /*
  * The module can be at any place in ram in nommu mode.
  */
-#define MODULE_END		(END_MEM)
-#define MODULE_START		(PHYS_OFFSET)
+#define MODULES_END		(END_MEM)
+#define MODULES_VADDR		(PHYS_OFFSET)
 
 #endif /* !CONFIG_MMU */
 

arch/arm/include/asm/system.h

@@ -42,6 +42,10 @@
 #define CR_U	(1 << 22)	/* Unaligned access operation		*/
 #define CR_XP	(1 << 23)	/* Extended page tables			*/
 #define CR_VE	(1 << 24)	/* Vectored interrupts			*/
+#define CR_EE	(1 << 25)	/* Exception (Big) Endian		*/
+#define CR_TRE	(1 << 28)	/* TEX remap enable			*/
+#define CR_AFE	(1 << 29)	/* Access flag enable			*/
+#define CR_TE	(1 << 30)	/* Thumb exception enable		*/
 
 /*
  * This is used to ensure the compiler did actually allocate the register we

arch/arm/kernel/elf.c

@@ -21,12 +21,16 @@ int elf_check_arch(const struct elf32_hdr *x)
 
 	eflags = x->e_flags;
 	if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN) {
+		unsigned int flt_fmt;
+
 		/* APCS26 is only allowed if the CPU supports it */
 		if ((eflags & EF_ARM_APCS_26) && !(elf_hwcap & HWCAP_26BIT))
 			return 0;
 
+		flt_fmt = eflags & (EF_ARM_VFP_FLOAT | EF_ARM_SOFT_FLOAT);
+
 		/* VFP requires the supporting code */
-		if ((eflags & EF_ARM_VFP_FLOAT) && !(elf_hwcap & HWCAP_VFP))
+		if (flt_fmt == EF_ARM_VFP_FLOAT && !(elf_hwcap & HWCAP_VFP))
 			return 0;
 	}
 	return 1;

arch/arm/kernel/module.c

@@ -26,12 +26,12 @@
 /*
  * The XIP kernel text is mapped in the module area for modules and
  * some other stuff to work without any indirect relocations.
- * MODULE_START is redefined here and not in asm/memory.h to avoid
+ * MODULES_VADDR is redefined here and not in asm/memory.h to avoid
  * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off.
  */
 extern void _etext;
-#undef MODULE_START
-#define MODULE_START	(((unsigned long)&_etext + ~PGDIR_MASK) & PGDIR_MASK)
+#undef MODULES_VADDR
+#define MODULES_VADDR	(((unsigned long)&_etext + ~PGDIR_MASK) & PGDIR_MASK)
 #endif
 
 #ifdef CONFIG_MMU
@@ -43,7 +43,7 @@ void *module_alloc(unsigned long size)
 	if (!size)
 		return NULL;
 
-	area = __get_vm_area(size, VM_ALLOC, MODULE_START, MODULE_END);
+	area = __get_vm_area(size, VM_ALLOC, MODULES_VADDR, MODULES_END);
 	if (!area)
 		return NULL;
 

arch/arm/mach-omap2/gpmc.c

@@ -429,18 +429,16 @@ void __init gpmc_init(void)
 	gpmc_l3_clk = clk_get(NULL, ck);
 	if (IS_ERR(gpmc_l3_clk)) {
 		printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
-		return -ENODEV;
+		BUG();
 	}
 
 	gpmc_base = ioremap(l, SZ_4K);
 	if (!gpmc_base) {
 		clk_put(gpmc_l3_clk);
 		printk(KERN_ERR "Could not get GPMC register memory\n");
-		return -ENOMEM;
+		BUG();
 	}
 
-	BUG_ON(IS_ERR(gpmc_l3_clk));
-
 	l = gpmc_read_reg(GPMC_REVISION);
 	printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
 	/* Set smart idle mode and automatic L3 clock gating */

arch/arm/mm/cache-xsc3l2.c

@@ -98,7 +98,7 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
 	/*
 	 * Clean and invalidate partial last cache line.
 	 */
-	if (end & (CACHE_LINE_SIZE - 1)) {
+	if (start < end && (end & (CACHE_LINE_SIZE - 1))) {
 		xsc3_l2_clean_pa(end & ~(CACHE_LINE_SIZE - 1));
 		xsc3_l2_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
 		end &= ~(CACHE_LINE_SIZE - 1);
@@ -107,7 +107,7 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
 	/*
 	 * Invalidate all full cache lines between 'start' and 'end'.
 	 */
-	while (start != end) {
+	while (start < end) {
 		xsc3_l2_inv_pa(start);
 		start += CACHE_LINE_SIZE;
 	}

arch/arm/mm/mmu.c

@@ -180,20 +180,20 @@ void adjust_cr(unsigned long mask, unsigned long set)
 #endif
 
 #define PROT_PTE_DEVICE		L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_WRITE
-#define PROT_SECT_DEVICE	PMD_TYPE_SECT|PMD_SECT_XN|PMD_SECT_AP_WRITE
+#define PROT_SECT_DEVICE	PMD_TYPE_SECT|PMD_SECT_AP_WRITE
 
 static struct mem_type mem_types[] = {
 	[MT_DEVICE] = {		  /* Strongly ordered / ARMv6 shared device */
 		.prot_pte	= PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED |
 				  L_PTE_SHARED,
 		.prot_l1	= PMD_TYPE_TABLE,
-		.prot_sect	= PROT_SECT_DEVICE | PMD_SECT_UNCACHED,
+		.prot_sect	= PROT_SECT_DEVICE | PMD_SECT_S,
 		.domain		= DOMAIN_IO,
 	},
 	[MT_DEVICE_NONSHARED] = { /* ARMv6 non-shared device */
 		.prot_pte	= PROT_PTE_DEVICE | L_PTE_MT_DEV_NONSHARED,
 		.prot_l1	= PMD_TYPE_TABLE,
-		.prot_sect	= PROT_SECT_DEVICE | PMD_SECT_TEX(2),
+		.prot_sect	= PROT_SECT_DEVICE,
 		.domain		= DOMAIN_IO,
 	},
 	[MT_DEVICE_CACHED] = {	  /* ioremap_cached */
@@ -205,7 +205,7 @@ static struct mem_type mem_types[] = {
 	[MT_DEVICE_WC] = {	/* ioremap_wc */
 		.prot_pte	= PROT_PTE_DEVICE | L_PTE_MT_DEV_WC,
 		.prot_l1	= PMD_TYPE_TABLE,
-		.prot_sect	= PROT_SECT_DEVICE | PMD_SECT_BUFFERABLE,
+		.prot_sect	= PROT_SECT_DEVICE,
 		.domain		= DOMAIN_IO,
 	},
 	[MT_CACHECLEAN] = {
@@ -273,22 +273,23 @@ static void __init build_mem_type_table(void)
 #endif
 
 	/*
-	 * On non-Xscale3 ARMv5-and-older systems, use CB=01
-	 * (Uncached/Buffered) for ioremap_wc() mappings.  On XScale3
-	 * and ARMv6+, use TEXCB=00100 mappings (Inner/Outer Uncacheable
-	 * in xsc3 parlance, Uncached Normal in ARMv6 parlance).
+	 * Strip out features not present on earlier architectures.
+	 * Pre-ARMv5 CPUs don't have TEX bits.  Pre-ARMv6 CPUs or those
+	 * without extended page tables don't have the 'Shared' bit.
 	 */
-	if (cpu_is_xsc3() || cpu_arch >= CPU_ARCH_ARMv6) {
-		mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
-		mem_types[MT_DEVICE_WC].prot_sect &= ~PMD_SECT_BUFFERABLE;
-	}
+	if (cpu_arch < CPU_ARCH_ARMv5)
+		for (i = 0; i < ARRAY_SIZE(mem_types); i++)
+			mem_types[i].prot_sect &= ~PMD_SECT_TEX(7);
+	if ((cpu_arch < CPU_ARCH_ARMv6 || !(cr & CR_XP)) && !cpu_is_xsc3())
+		for (i = 0; i < ARRAY_SIZE(mem_types); i++)
+			mem_types[i].prot_sect &= ~PMD_SECT_S;
 
 	/*
-	 * ARMv5 and lower, bit 4 must be set for page tables.
-	 * (was: cache "update-able on write" bit on ARM610)
-	 * However, Xscale cores require this bit to be cleared.
+	 * ARMv5 and lower, bit 4 must be set for page tables (was: cache
+	 * "update-able on write" bit on ARM610).  However, Xscale and
+	 * Xscale3 require this bit to be cleared.
 	 */
-	if (cpu_is_xscale()) {
+	if (cpu_is_xscale() || cpu_is_xsc3()) {
 		for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 			mem_types[i].prot_sect &= ~PMD_BIT4;
 			mem_types[i].prot_l1 &= ~PMD_BIT4;
@@ -302,6 +303,64 @@ static void __init build_mem_type_table(void)
 		}
 	}
 
+	/*
+	 * Mark the device areas according to the CPU/architecture.
+	 */
+	if (cpu_is_xsc3() || (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP))) {
+		if (!cpu_is_xsc3()) {
+			/*
+			 * Mark device regions on ARMv6+ as execute-never
+			 * to prevent speculative instruction fetches.
+			 */
+			mem_types[MT_DEVICE].prot_sect |= PMD_SECT_XN;
+			mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_XN;
+			mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_XN;
+			mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_XN;
+		}
+		if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
+			/*
+			 * For ARMv7 with TEX remapping,
+			 * - shared device is SXCB=1100
+			 * - nonshared device is SXCB=0100
+			 * - write combine device mem is SXCB=0001
+			 * (Uncached Normal memory)
+			 */
+			mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1);
+			mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(1);
+			mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
+		} else if (cpu_is_xsc3()) {
+			/*
+			 * For Xscale3,
+			 * - shared device is TEXCB=00101
+			 * - nonshared device is TEXCB=01000
+			 * - write combine device mem is TEXCB=00100
+			 * (Inner/Outer Uncacheable in xsc3 parlance)
+			 */
+			mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1) | PMD_SECT_BUFFERED;
+			mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2);
+			mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
+		} else {
+			/*
+			 * For ARMv6 and ARMv7 without TEX remapping,
+			 * - shared device is TEXCB=00001
+			 * - nonshared device is TEXCB=01000
+			 * - write combine device mem is TEXCB=00100
+			 * (Uncached Normal in ARMv6 parlance).
+			 */
+			mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
+			mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2);
+			mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
+		}
+	} else {
+		/*
+		 * On others, write combining is "Uncached/Buffered"
+		 */
+		mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
+	}
+
+	/*
+	 * Now deal with the memory-type mappings
+	 */
 	cp = &cache_policies[cachepolicy];
 	vecs_pgprot = kern_pgprot = user_pgprot = cp->pte;
 
@@ -317,12 +376,8 @@ static void __init build_mem_type_table(void)
 	 * Enable CPU-specific coherency if supported.
 	 * (Only available on XSC3 at the moment.)
 	 */
-	if (arch_is_coherent()) {
-		if (cpu_is_xsc3()) {
-			mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
-			mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
-		}
-	}
+	if (arch_is_coherent() && cpu_is_xsc3())
+		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
 
 	/*
 	 * ARMv6 and above have extended page tables.
@@ -336,11 +391,6 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 
-		/*
-		 * Mark the device area as "shared device"
-		 */
-		mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
-
 #ifdef CONFIG_SMP
 		/*
 		 * Mark memory with the "shared" attribute for SMP systems
@@ -360,9 +410,6 @@ static void __init build_mem_type_table(void)
 	mem_types[MT_LOW_VECTORS].prot_pte |= vecs_pgprot;
 	mem_types[MT_HIGH_VECTORS].prot_pte |= vecs_pgprot;
 
-	if (cpu_arch < CPU_ARCH_ARMv5)
-		mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1);
-
 	pgprot_user   = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot);
 	pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
 				 L_PTE_DIRTY | L_PTE_WRITE |
@@ -654,7 +701,7 @@ static inline void prepare_page_table(struct meminfo *mi)
 	/*
 	 * Clear out all the mappings below the kernel image.
 	 */
-	for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE)
+	for (addr = 0; addr < MODULES_VADDR; addr += PGDIR_SIZE)
 		pmd_clear(pmd_off_k(addr));
 
 #ifdef CONFIG_XIP_KERNEL
@@ -766,7 +813,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 	 */
 #ifdef CONFIG_XIP_KERNEL
 	map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
-	map.virtual = MODULE_START;
+	map.virtual = MODULES_VADDR;
 	map.length = ((unsigned long)&_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
 	map.type = MT_ROM;
 	create_mapping(&map);

arch/arm/mm/proc-v7.S

@@ -115,7 +115,7 @@ ENTRY(cpu_v7_set_pte_ext)
 	orr	r3, r3, r2
 	orr	r3, r3, #PTE_EXT_AP0 | 2
 
-	tst	r2, #1 << 4
+	tst	r1, #1 << 4
 	orrne	r3, r3, #PTE_EXT_TEX(1)
 
 	tst	r1, #L_PTE_WRITE
@@ -192,11 +192,11 @@ __v7_setup:
 	mov	pc, lr				@ return to head.S:__ret
 ENDPROC(__v7_setup)
 
-	/*
-	 *         V X F   I D LR
-	 * .... ...E PUI. .T.T 4RVI ZFRS BLDP WCAM
-	 * rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced
-	 *         0 110       0011 1.00 .111 1101 < we want
+	/*   AT
+	 *  TFR   EV X F   I D LR
+	 * .EEE ..EE PUI. .T.T 4RVI ZFRS BLDP WCAM
+	 * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
+	 *    1    0 110       0011 1.00 .111 1101 < we want
 	 */
 	.type	v7_crval, #object
 v7_crval:

arch/arm/plat-omap/clock.c

@@ -428,23 +428,23 @@ static int clk_debugfs_register_one(struct clk *c)
 	if (c->id != 0)
 		sprintf(p, ":%d", c->id);
 	d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
-	if (IS_ERR(d))
-		return PTR_ERR(d);
+	if (!d)
+		return -ENOMEM;
 	c->dent = d;
 
 	d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
-	if (IS_ERR(d)) {
-		err = PTR_ERR(d);
+	if (!d) {
+		err = -ENOMEM;
 		goto err_out;
 	}
 	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
-	if (IS_ERR(d)) {
-		err = PTR_ERR(d);
+	if (!d) {
+		err = -ENOMEM;
 		goto err_out;
 	}
 	d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
-	if (IS_ERR(d)) {
-		err = PTR_ERR(d);
+	if (!d) {
+		err = -ENOMEM;
 		goto err_out;
 	}
 	return 0;
@@ -483,8 +483,8 @@ static int __init clk_debugfs_init(void)
 	int err;
 
 	d = debugfs_create_dir("clock", NULL);
-	if (IS_ERR(d))
-		return PTR_ERR(d);
+	if (!d)
+		return -ENOMEM;
 	clk_debugfs_root = d;
 
 	list_for_each_entry(c, &clocks, node) {

arch/arm/plat-omap/include/mach/entry-macro.S

@@ -65,7 +65,8 @@
 #include <mach/omap34xx.h>
 #endif
 
-#define INTCPS_SIR_IRQ_OFFSET	0x0040		/* Active interrupt number */
+#define INTCPS_SIR_IRQ_OFFSET	0x0040		/* Active interrupt offset */
+#define	ACTIVEIRQ_MASK		0x7f		/* Active interrupt bits */
 
 		.macro	disable_fiq
 		.endm
@@ -88,6 +89,7 @@
 		cmp	\irqnr, #0x0
 2222:
 		ldrne	\irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
+		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
 
 		.endm
 

arch/arm/plat-omap/include/mach/irqs.h

@@ -372,7 +372,7 @@
 
 /* External TWL4030 gpio interrupts are optional */
 #define TWL4030_GPIO_IRQ_BASE	TWL4030_PWR_IRQ_END
-#ifdef	CONFIG_TWL4030_GPIO
+#ifdef	CONFIG_GPIO_TWL4030
 #define TWL4030_GPIO_NR_IRQS	18
 #else
 #define	TWL4030_GPIO_NR_IRQS	0

arch/ia64/Kconfig

@@ -148,6 +148,7 @@ config IA64_GENERIC
 	select ACPI_NUMA
 	select SWIOTLB
 	select PCI_MSI
+	select DMAR
 	help
 	  This selects the system type of your hardware.  A "generic" kernel
 	  will run on any supported IA-64 system.  However, if you configure
@@ -585,7 +586,7 @@ source "fs/Kconfig.binfmt"
 
 endmenu
 
-menu "Power management and ACPI"
+menu "Power management and ACPI options"
 
 source "kernel/power/Kconfig"
 
@@ -641,6 +642,8 @@ source "net/Kconfig"
 
 source "drivers/Kconfig"
 
+source "arch/ia64/hp/sim/Kconfig"
+
 config MSPEC
 	tristate "Memory special operations driver"
 	depends on IA64
@@ -652,6 +655,12 @@ config MSPEC
 
 source "fs/Kconfig"
 
+source "arch/ia64/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
 source "arch/ia64/kvm/Kconfig"
 
 source "lib/Kconfig"
@@ -678,11 +687,3 @@ config IRQ_PER_CPU
 
 config IOMMU_HELPER
 	def_bool (IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB || IA64_GENERIC || SWIOTLB)
-
-source "arch/ia64/hp/sim/Kconfig"
-
-source "arch/ia64/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"

arch/ia64/hp/common/hwsw_iommu.c

@@ -13,19 +13,12 @@
  */
 
 #include <linux/device.h>
+#include <linux/swiotlb.h>
 
 #include <asm/machvec.h>
 
 /* swiotlb declarations & definitions: */
 extern int swiotlb_late_init_with_default_size (size_t size);
-extern ia64_mv_dma_alloc_coherent	swiotlb_alloc_coherent;
-extern ia64_mv_dma_free_coherent	swiotlb_free_coherent;
-extern ia64_mv_dma_map_single_attrs	swiotlb_map_single_attrs;
-extern ia64_mv_dma_unmap_single_attrs	swiotlb_unmap_single_attrs;
-extern ia64_mv_dma_map_sg_attrs		swiotlb_map_sg_attrs;
-extern ia64_mv_dma_unmap_sg_attrs	swiotlb_unmap_sg_attrs;
-extern ia64_mv_dma_supported		swiotlb_dma_supported;
-extern ia64_mv_dma_mapping_error	swiotlb_dma_mapping_error;
 
 /* hwiommu declarations & definitions: */
 

arch/ia64/include/asm/io.h

@@ -434,28 +434,4 @@ extern void memset_io(volatile void __iomem *s, int c, long n);
 
 # endif /* __KERNEL__ */
 
-/*
- * Enabling BIO_VMERGE_BOUNDARY forces us to turn off I/O MMU bypassing.  It is said that
- * BIO-level virtual merging can give up to 4% performance boost (not verified for ia64).
- * On the other hand, we know that I/O MMU bypassing gives ~8% performance improvement on
- * SPECweb-like workloads on zx1-based machines.  Thus, for now we favor I/O MMU bypassing
- * over BIO-level virtual merging.
- */
-extern unsigned long ia64_max_iommu_merge_mask;
-#if 1
-#define BIO_VMERGE_BOUNDARY	0
-#else
-/*
- * It makes no sense at all to have this BIO_VMERGE_BOUNDARY macro here.  Should be
- * replaced by dma_merge_mask() or something of that sort.  Note: the only way
- * BIO_VMERGE_BOUNDARY is used is to mask off bits.  Effectively, our definition gets
- * expanded into:
- *
- *	addr & ((ia64_max_iommu_merge_mask + 1) - 1) == (addr & ia64_max_iommu_vmerge_mask)
- *
- * which is precisely what we want.
- */
-#define BIO_VMERGE_BOUNDARY	(ia64_max_iommu_merge_mask + 1)
-#endif
-
 #endif /* _ASM_IA64_IO_H */

arch/ia64/include/asm/machvec.h

@@ -11,6 +11,7 @@
 #define _ASM_IA64_MACHVEC_H
 
 #include <linux/types.h>
+#include <linux/swiotlb.h>
 
 /* forward declarations: */
 struct device;
@@ -297,27 +298,6 @@ extern void machvec_init_from_cmdline(const char *cmdline);
 #  error Unknown configuration.  Update arch/ia64/include/asm/machvec.h.
 # endif /* CONFIG_IA64_GENERIC */
 
-/*
- * Declare default routines which aren't declared anywhere else:
- */
-extern ia64_mv_dma_init			swiotlb_init;
-extern ia64_mv_dma_alloc_coherent	swiotlb_alloc_coherent;
-extern ia64_mv_dma_free_coherent	swiotlb_free_coherent;
-extern ia64_mv_dma_map_single		swiotlb_map_single;
-extern ia64_mv_dma_map_single_attrs	swiotlb_map_single_attrs;
-extern ia64_mv_dma_unmap_single		swiotlb_unmap_single;
-extern ia64_mv_dma_unmap_single_attrs	swiotlb_unmap_single_attrs;
-extern ia64_mv_dma_map_sg		swiotlb_map_sg;
-extern ia64_mv_dma_map_sg_attrs		swiotlb_map_sg_attrs;
-extern ia64_mv_dma_unmap_sg		swiotlb_unmap_sg;
-extern ia64_mv_dma_unmap_sg_attrs	swiotlb_unmap_sg_attrs;
-extern ia64_mv_dma_sync_single_for_cpu	swiotlb_sync_single_for_cpu;
-extern ia64_mv_dma_sync_sg_for_cpu	swiotlb_sync_sg_for_cpu;
-extern ia64_mv_dma_sync_single_for_device swiotlb_sync_single_for_device;
-extern ia64_mv_dma_sync_sg_for_device	swiotlb_sync_sg_for_device;
-extern ia64_mv_dma_mapping_error	swiotlb_dma_mapping_error;
-extern ia64_mv_dma_supported		swiotlb_dma_supported;
-
 /*
  * Define default versions so we can extend machvec for new platforms without having
  * to update the machvec files for all existing platforms.

arch/ia64/include/asm/meminit.h

@@ -48,7 +48,6 @@ extern int reserve_elfcorehdr(unsigned long *start, unsigned long *end);
  */
 #define GRANULEROUNDDOWN(n)	((n) & ~(IA64_GRANULE_SIZE-1))
 #define GRANULEROUNDUP(n)	(((n)+IA64_GRANULE_SIZE-1) & ~(IA64_GRANULE_SIZE-1))
-#define ORDERROUNDDOWN(n)	((n) & ~((PAGE_SIZE<<MAX_ORDER)-1))
 
 #ifdef CONFIG_NUMA
   extern void call_pernode_memory (unsigned long start, unsigned long len, void *func);

arch/ia64/include/asm/sal.h

@@ -337,11 +337,24 @@ typedef struct sal_log_record_header {
 #define sal_log_severity_fatal		1
 #define sal_log_severity_corrected	2
 
+/*
+ * Error Recovery Info (ERI) bit decode.  From SAL Spec section B.2.2 Table B-3
+ * Error Section Error_Recovery_Info Field Definition.
+ */
+#define ERI_NOT_VALID		0x0	/* Error Recovery Field is not valid */
+#define ERI_NOT_ACCESSIBLE	0x30	/* Resource not accessible */
+#define ERI_CONTAINMENT_WARN	0x22	/* Corrupt data propagated */
+#define ERI_UNCORRECTED_ERROR	0x20	/* Uncorrected error */
+#define ERI_COMPONENT_RESET	0x24	/* Component must be reset */
+#define ERI_CORR_ERROR_LOG	0x21	/* Corrected error, needs logging */
+#define ERI_CORR_ERROR_THRESH	0x29	/* Corrected error threshold exceeded */
+
 /* Definition of log section header structures */
 typedef struct sal_log_sec_header {
     efi_guid_t guid;			/* Unique Section ID */
     sal_log_revision_t revision;	/* Major and Minor revision of Section */
-    u16 reserved;
+    u8 error_recovery_info;		/* Platform error recovery status */
+    u8 reserved;
     u32 len;				/* Section length */
 } sal_log_section_hdr_t;
 

arch/ia64/include/asm/sn/sn_sal.h

@@ -90,6 +90,8 @@
 #define  SN_SAL_SET_CPU_NUMBER			   0x02000068
 
 #define  SN_SAL_KERNEL_LAUNCH_EVENT		   0x02000069
+#define  SN_SAL_WATCHLIST_ALLOC			   0x02000070
+#define  SN_SAL_WATCHLIST_FREE			   0x02000071
 
 /*
  * Service-specific constants
@@ -1185,4 +1187,47 @@ ia64_sn_kernel_launch_event(void)
 	SAL_CALL_NOLOCK(rv, SN_SAL_KERNEL_LAUNCH_EVENT, 0, 0, 0, 0, 0, 0, 0);
 	return rv.status;
 }
+
+union sn_watchlist_u {
+	u64     val;
+	struct {
+		u64	blade	: 16,
+			size	: 32,
+			filler	: 16;
+	};
+};
+
+static inline int
+sn_mq_watchlist_alloc(int blade, void *mq, unsigned int mq_size,
+				unsigned long *intr_mmr_offset)
+{
+	struct ia64_sal_retval rv;
+	unsigned long addr;
+	union sn_watchlist_u size_blade;
+	int watchlist;
+
+	addr = (unsigned long)mq;
+	size_blade.size = mq_size;
+	size_blade.blade = blade;
+
+	/*
+	 * bios returns watchlist number or negative error number.
+	 */
+	ia64_sal_oemcall_nolock(&rv, SN_SAL_WATCHLIST_ALLOC, addr,
+			size_blade.val, (u64)intr_mmr_offset,
+			(u64)&watchlist, 0, 0, 0);
+	if (rv.status < 0)
+		return rv.status;
+
+	return watchlist;
+}
+
+static inline int
+sn_mq_watchlist_free(int blade, int watchlist_num)
+{
+	struct ia64_sal_retval rv;
+	ia64_sal_oemcall_nolock(&rv, SN_SAL_WATCHLIST_FREE, blade,
+			watchlist_num, 0, 0, 0, 0, 0);
+	return rv.status;
+}
 #endif /* _ASM_IA64_SN_SN_SAL_H */

arch/ia64/kernel/acpi.c

@@ -678,6 +678,30 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table)
 	return 0;
 }
 
+int __init early_acpi_boot_init(void)
+{
+	int ret;
+
+	/*
+	 * do a partial walk of MADT to determine how many CPUs
+	 * we have including offline CPUs
+	 */
+	if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
+		printk(KERN_ERR PREFIX "Can't find MADT\n");
+		return 0;
+	}
+
+	ret = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC,
+		acpi_parse_lsapic, NR_CPUS);
+	if (ret < 1)
+		printk(KERN_ERR PREFIX
+		       "Error parsing MADT - no LAPIC entries\n");
+
+	return 0;
+}
+
+
+
 int __init acpi_boot_init(void)
 {
 
@@ -701,11 +725,6 @@ int __init acpi_boot_init(void)
 		printk(KERN_ERR PREFIX
 		       "Error parsing LAPIC address override entry\n");
 
-	if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC, acpi_parse_lsapic, NR_CPUS)
-	    < 1)
-		printk(KERN_ERR PREFIX
-		       "Error parsing MADT - no LAPIC entries\n");
-
 	if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0)
 	    < 0)
 		printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");

arch/ia64/kernel/pci-dma.c

@@ -12,13 +12,11 @@
 #include <asm/machvec.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/machvec.h>
 #include <asm/system.h>
 
 #ifdef CONFIG_DMAR
 
 #include <linux/kernel.h>
-#include <linux/string.h>
 
 #include <asm/page.h>
 #include <asm/iommu.h>

arch/ia64/kernel/setup.c

@@ -359,7 +359,7 @@ reserve_memory (void)
 	}
 #endif
 
-#ifdef CONFIG_CRASH_KERNEL
+#ifdef CONFIG_CRASH_DUMP
 	if (reserve_elfcorehdr(&rsvd_region[n].start,
 			       &rsvd_region[n].end) == 0)
 		n++;
@@ -561,8 +561,12 @@ setup_arch (char **cmdline_p)
 #ifdef CONFIG_ACPI
 	/* Initialize the ACPI boot-time table parser */
 	acpi_table_init();
+	early_acpi_boot_init();
 # ifdef CONFIG_ACPI_NUMA
 	acpi_numa_init();
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+	prefill_possible_map();
+#endif
 	per_cpu_scan_finalize((cpus_weight(early_cpu_possible_map) == 0 ?
 		32 : cpus_weight(early_cpu_possible_map)),
 		additional_cpus > 0 ? additional_cpus : 0);
@@ -853,9 +857,6 @@ void __init
 setup_per_cpu_areas (void)
 {
 	/* start_kernel() requires this... */
-#ifdef CONFIG_ACPI_HOTPLUG_CPU
-	prefill_possible_map();
-#endif
 }
 
 /*

arch/ia64/mm/discontig.c

@@ -635,7 +635,6 @@ static __init int count_node_pages(unsigned long start, unsigned long len, int n
 			(min(end, __pa(MAX_DMA_ADDRESS)) - start) >>PAGE_SHIFT;
 #endif
 	start = GRANULEROUNDDOWN(start);
-	start = ORDERROUNDDOWN(start);
 	end = GRANULEROUNDUP(end);
 	mem_data[node].max_pfn = max(mem_data[node].max_pfn,
 				     end >> PAGE_SHIFT);

arch/ia64/uv/kernel/setup.c

@@ -19,6 +19,12 @@ EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
 
 #ifdef CONFIG_IA64_SGI_UV
 int sn_prom_type;
+long sn_partition_id;
+EXPORT_SYMBOL(sn_partition_id);
+long sn_coherency_id;
+EXPORT_SYMBOL_GPL(sn_coherency_id);
+long sn_region_size;
+EXPORT_SYMBOL(sn_region_size);
 #endif
 
 struct redir_addr {

arch/powerpc/boot/dts/gef_sbc610.dts

@@ -108,7 +108,7 @@
 		compatible = "simple-bus";
 		ranges = <0x0 0xfef00000 0x00100000>;
 		reg = <0xfef00000 0x100000>;	// CCSRBAR 1M
-		bus-frequency = <0>;
+		bus-frequency = <33333333>;
 
 		i2c1: i2c@3000 {
 			#address-cells = <1>;

arch/powerpc/configs/83xx/asp8347_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 00:52:01 2008
+# Linux kernel version: 2.6.28-rc3
+# Sat Nov  8 12:39:49 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
@@ -54,8 +54,6 @@ CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_REDBOOT=y
-CONFIG_HIBERNATE_32=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -99,7 +97,6 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -109,7 +106,9 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -122,10 +121,6 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -158,6 +153,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform support
@@ -165,10 +161,10 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
@@ -188,24 +184,21 @@ CONFIG_ASP834x=y
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
-CONFIG_PPC_NATIVE=y
-# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-CONFIG_MPIC=y
+# CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
-CONFIG_RTAS_PROC=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
-CONFIG_PPC_MPC106=y
+# CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_PPC601_SYNC_FIX is not set
 # CONFIG_TAU is not set
+# CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_MPC8xxx_GPIO is not set
 
 #
 # Kernel options
@@ -225,6 +218,8 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -239,15 +234,15 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -259,7 +254,6 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
-# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
@@ -272,7 +266,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -340,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -360,11 +355,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -470,7 +464,6 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
-# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -547,8 +540,6 @@ CONFIG_PHYLIB=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_MACE is not set
-# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -559,8 +550,12 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -583,6 +578,7 @@ CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -667,14 +663,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
-# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -710,12 +703,6 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 
-#
-# Mac SMBus host controller drivers
-#
-# CONFIG_I2C_HYDRA is not set
-CONFIG_I2C_POWERMAC=y
-
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
@@ -753,6 +740,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -774,7 +762,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -829,7 +816,6 @@ CONFIG_WATCHDOG=y
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_ALIM7101_WDT is not set
 # CONFIG_8xxx_WDT is not set
-# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -855,6 +841,17 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -907,6 +904,8 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -923,6 +922,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -930,6 +931,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -956,6 +958,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -972,7 +975,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1018,12 +1023,15 @@ CONFIG_RTC_DRV_DS1374=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1032,6 +1040,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1043,12 +1052,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -1078,6 +1088,7 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1126,6 +1137,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1197,7 +1209,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1229,13 +1240,15 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
@@ -1247,14 +1260,19 @@ CONFIG_HAVE_ARCH_KGDB=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1327,6 +1345,11 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_CRYPTO_DEV_TALITOS is not set

arch/powerpc/configs/83xx/mpc8313_rdb_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 00:52:17 2008
+# Linux kernel version: 2.6.28-rc3
+# Sat Nov  8 12:39:50 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
@@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
-CONFIG_HIBERNATE_32=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform support
@@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
@@ -187,24 +183,21 @@ CONFIG_MPC831x_RDB=y
 CONFIG_PPC_MPC831x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
-CONFIG_PPC_NATIVE=y
-# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-CONFIG_MPIC=y
+# CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
-CONFIG_RTAS_PROC=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
-CONFIG_PPC_MPC106=y
+# CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_PPC601_SYNC_FIX is not set
 # CONFIG_TAU is not set
+# CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_MPC8xxx_GPIO is not set
 
 #
 # Kernel options
@@ -224,6 +217,8 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -238,15 +233,15 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -258,7 +253,6 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
-# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
@@ -271,7 +265,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
@@ -340,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -360,11 +355,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -470,6 +464,7 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_FSL_ELBC=y
+# CONFIG_MTD_NAND_FSL_UPM is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -482,7 +477,6 @@ CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
-# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -583,13 +577,12 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_MESH is not set
-# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
@@ -638,8 +631,6 @@ CONFIG_CICADA_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_MACE is not set
-# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -651,6 +642,9 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -671,6 +665,7 @@ CONFIG_E100=y
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -693,18 +688,22 @@ CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_TR is not set
 
@@ -790,14 +789,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
-# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -833,12 +829,6 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 
-#
-# Mac SMBus host controller drivers
-#
-# CONFIG_I2C_HYDRA is not set
-CONFIG_I2C_POWERMAC=y
-
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
@@ -876,6 +866,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -913,7 +904,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -935,6 +925,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -969,7 +960,6 @@ CONFIG_WATCHDOG=y
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_ALIM7101_WDT is not set
 # CONFIG_8xxx_WDT is not set
-# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -995,6 +985,17 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1037,12 +1038,18 @@ CONFIG_HID=y
 # USB Input Devices
 #
 # CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
 
 #
 # USB HID Boot Protocol drivers
 #
 # CONFIG_USB_KBD is not set
 # CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1061,6 +1068,8 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1084,6 +1093,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 # CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
@@ -1092,6 +1103,7 @@ CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1113,7 +1125,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1134,6 +1145,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1151,23 +1163,26 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
-CONFIG_USB_GADGET_NET2280=y
-CONFIG_USB_NET2280=y
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+CONFIG_USB_GADGET_NET2280=y
+CONFIG_USB_NET2280=y
+# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
@@ -1179,6 +1194,7 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1224,17 +1240,21 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1243,6 +1263,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1254,12 +1275,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -1289,6 +1311,7 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1337,6 +1360,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1373,7 +1397,6 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1427,15 +1450,23 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1444,6 +1475,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
 # CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
@@ -1455,14 +1487,19 @@ CONFIG_HAVE_ARCH_KGDB=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1535,6 +1572,11 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_CRYPTO_DEV_TALITOS is not set

arch/powerpc/configs/83xx/mpc8315_rdb_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 00:52:18 2008
+# Linux kernel version: 2.6.28-rc3
+# Sat Nov  8 12:39:51 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
@@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
-CONFIG_HIBERNATE_32=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform support
@@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
@@ -187,24 +183,21 @@ CONFIG_MPC831x_RDB=y
 CONFIG_PPC_MPC831x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
-CONFIG_PPC_NATIVE=y
-# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-CONFIG_MPIC=y
+# CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
-CONFIG_RTAS_PROC=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
-CONFIG_PPC_MPC106=y
+# CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_PPC601_SYNC_FIX is not set
 # CONFIG_TAU is not set
+# CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_MPC8xxx_GPIO is not set
 
 #
 # Kernel options
@@ -224,6 +217,8 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -238,15 +233,15 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -258,7 +253,6 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
-# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
@@ -271,7 +265,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
@@ -340,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -360,11 +355,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -470,6 +464,7 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_NAND_FSL_ELBC is not set
+# CONFIG_MTD_NAND_FSL_UPM is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -482,7 +477,6 @@ CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
-# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -584,8 +578,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_MESH is not set
-# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
@@ -651,6 +643,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
@@ -699,8 +692,6 @@ CONFIG_PHYLIB=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_MACE is not set
-# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -712,6 +703,9 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -732,6 +726,7 @@ CONFIG_E100=y
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -754,18 +749,22 @@ CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_TR is not set
 
@@ -851,14 +850,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
-# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -894,12 +890,6 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 
-#
-# Mac SMBus host controller drivers
-#
-# CONFIG_I2C_HYDRA is not set
-CONFIG_I2C_POWERMAC=y
-
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
@@ -937,6 +927,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -974,7 +965,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -996,6 +986,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -1030,7 +1021,6 @@ CONFIG_WATCHDOG=y
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_ALIM7101_WDT is not set
 # CONFIG_8xxx_WDT is not set
-# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -1056,6 +1046,17 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1098,12 +1099,18 @@ CONFIG_HID=y
 # USB Input Devices
 #
 # CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
 
 #
 # USB HID Boot Protocol drivers
 #
 # CONFIG_USB_KBD is not set
 # CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1122,6 +1129,8 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1145,6 +1154,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 # CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
@@ -1153,6 +1164,7 @@ CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1174,7 +1186,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1195,6 +1206,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1212,23 +1224,26 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
-CONFIG_USB_GADGET_NET2280=y
-CONFIG_USB_NET2280=y
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+CONFIG_USB_GADGET_NET2280=y
+CONFIG_USB_NET2280=y
+# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
@@ -1240,6 +1255,7 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1285,17 +1301,21 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1304,6 +1324,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1315,12 +1336,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -1350,6 +1372,7 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1398,6 +1421,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1434,7 +1458,6 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1488,15 +1511,23 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1505,6 +1536,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
 # CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
@@ -1516,14 +1548,19 @@ CONFIG_HAVE_ARCH_KGDB=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1596,6 +1633,11 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_CRYPTO_DEV_TALITOS is not set

arch/powerpc/configs/83xx/mpc832x_mds_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 00:52:18 2008
+# Linux kernel version: 2.6.28-rc3
+# Sat Nov  8 12:39:53 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
@@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
-CONFIG_HIBERNATE_32=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform support
@@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
@@ -187,24 +183,20 @@ CONFIG_MPC832x_MDS=y
 CONFIG_PPC_MPC832x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
-CONFIG_PPC_NATIVE=y
-# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-CONFIG_MPIC=y
+# CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
-CONFIG_RTAS_PROC=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
-CONFIG_PPC_MPC106=y
+# CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_PPC601_SYNC_FIX is not set
 # CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
+# CONFIG_QE_GPIO is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -225,6 +217,8 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
@@ -240,15 +234,15 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -260,7 +254,6 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
-# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
@@ -273,7 +266,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -341,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -361,11 +355,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -391,7 +384,6 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
-# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -491,8 +483,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_MESH is not set
-# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
@@ -537,8 +527,6 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_MACE is not set
-# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -549,8 +537,12 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -577,18 +569,22 @@ CONFIG_UCC_GETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_TR is not set
 
@@ -665,15 +661,12 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
-# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -709,12 +702,6 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 
-#
-# Mac SMBus host controller drivers
-#
-# CONFIG_I2C_HYDRA is not set
-CONFIG_I2C_POWERMAC=y
-
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
@@ -751,6 +738,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -772,7 +760,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -827,7 +814,6 @@ CONFIG_WATCHDOG=y
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_ALIM7101_WDT is not set
 # CONFIG_8xxx_WDT is not set
-# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -848,6 +834,17 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -884,6 +881,12 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -900,6 +903,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -945,12 +949,15 @@ CONFIG_RTC_DRV_DS1374=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -959,6 +966,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -970,12 +978,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -1005,6 +1014,7 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1042,6 +1052,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1071,13 +1082,11 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
-# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1107,13 +1116,15 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
@@ -1125,14 +1136,19 @@ CONFIG_HAVE_ARCH_KGDB=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1205,6 +1221,11 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_CRYPTO_DEV_TALITOS is not set

arch/powerpc/configs/83xx/mpc832x_rdb_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 00:52:19 2008
+# Linux kernel version: 2.6.28-rc3
+# Sat Nov  8 12:39:54 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
@@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
-CONFIG_HIBERNATE_32=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform support
@@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
@@ -187,24 +183,20 @@ CONFIG_MPC832x_RDB=y
 CONFIG_PPC_MPC832x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
-CONFIG_PPC_NATIVE=y
-# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-CONFIG_MPIC=y
+# CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
-CONFIG_RTAS_PROC=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
-CONFIG_PPC_MPC106=y
+# CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_PPC601_SYNC_FIX is not set
 # CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
+# CONFIG_QE_GPIO is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -225,6 +217,8 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
@@ -240,15 +234,15 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -260,7 +254,6 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
-# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
@@ -273,7 +266,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -341,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -361,11 +355,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -392,7 +385,6 @@ CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
-# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -493,8 +485,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_MESH is not set
-# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
@@ -539,8 +529,6 @@ CONFIG_ICPLUS_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_MACE is not set
-# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -552,13 +540,16 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
@@ -581,18 +572,22 @@ CONFIG_UCC_GETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_TR is not set
 
@@ -678,15 +673,12 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
-# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -724,12 +716,6 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 
-#
-# Mac SMBus host controller drivers
-#
-# CONFIG_I2C_HYDRA is not set
-CONFIG_I2C_POWERMAC=y
-
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
@@ -767,6 +753,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -803,7 +790,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -825,6 +811,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -859,7 +846,6 @@ CONFIG_WATCHDOG=y
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_ALIM7101_WDT is not set
 # CONFIG_8xxx_WDT is not set
-# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -885,6 +871,17 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -927,12 +924,18 @@ CONFIG_HID=y
 # USB Input Devices
 #
 # CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
 
 #
 # USB HID Boot Protocol drivers
 #
 # CONFIG_USB_KBD is not set
 # CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -951,6 +954,8 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -974,6 +979,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -981,6 +988,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1002,7 +1010,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1023,6 +1030,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1040,13 +1048,15 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
@@ -1054,7 +1064,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_WBSD is not set
@@ -1068,6 +1078,7 @@ CONFIG_MMC_SPI=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1079,12 +1090,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -1117,6 +1129,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1154,6 +1167,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1227,13 +1241,11 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
-# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1263,13 +1275,15 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
@@ -1281,14 +1295,19 @@ CONFIG_HAVE_ARCH_KGDB=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1361,6 +1380,11 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_CRYPTO_DEV_TALITOS is not set

arch/powerpc/configs/83xx/mpc834x_itx_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 00:52:20 2008
+# Linux kernel version: 2.6.28-rc3
+# Sat Nov  8 12:39:56 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
@@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
-CONFIG_HIBERNATE_32=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform support
@@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
@@ -187,24 +183,21 @@ CONFIG_MPC834x_ITX=y
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
-CONFIG_PPC_NATIVE=y
-# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-CONFIG_MPIC=y
+# CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
-CONFIG_RTAS_PROC=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
-CONFIG_PPC_MPC106=y
+# CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_PPC601_SYNC_FIX is not set
 # CONFIG_TAU is not set
+# CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_MPC8xxx_GPIO is not set
 
 #
 # Kernel options
@@ -224,6 +217,8 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -238,15 +233,15 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -258,7 +253,6 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
-# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
@@ -271,7 +265,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -339,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -359,11 +354,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -469,7 +463,6 @@ CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
-# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -496,7 +489,54 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-# CONFIG_BLK_DEV_IDE is not set
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
 
 #
 # SCSI device support
@@ -572,8 +612,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_MESH is not set
-# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
@@ -640,6 +678,7 @@ CONFIG_PATA_OF_PLATFORM=y
 # CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
@@ -709,18 +748,22 @@ CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_TR is not set
 
@@ -786,14 +829,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
-# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -829,12 +869,6 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 
-#
-# Mac SMBus host controller drivers
-#
-# CONFIG_I2C_HYDRA is not set
-CONFIG_I2C_POWERMAC=y
-
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
@@ -872,6 +906,7 @@ CONFIG_SENSORS_PCF8574=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -907,7 +942,6 @@ CONFIG_WATCHDOG=y
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_ALIM7101_WDT is not set
 # CONFIG_8xxx_WDT is not set
-# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -933,6 +967,17 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -984,6 +1029,8 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1000,6 +1047,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1007,6 +1056,7 @@ CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1027,7 +1077,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1048,6 +1097,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1065,7 +1115,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1111,17 +1163,21 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1130,6 +1186,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1141,12 +1198,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -1179,6 +1237,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1217,6 +1276,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1292,7 +1352,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1322,13 +1381,15 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
@@ -1340,14 +1401,19 @@ CONFIG_HAVE_ARCH_KGDB=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1420,6 +1486,11 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_CRYPTO_DEV_TALITOS is not set

arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 00:52:21 2008
+# Linux kernel version: 2.6.28-rc3
+# Sat Nov  8 12:39:57 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
@@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
-CONFIG_HIBERNATE_32=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform support
@@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
@@ -187,24 +183,21 @@ CONFIG_MPC834x_ITX=y
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
-CONFIG_PPC_NATIVE=y
-# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-CONFIG_MPIC=y
+# CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
-CONFIG_RTAS_PROC=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
-CONFIG_PPC_MPC106=y
+# CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_PPC601_SYNC_FIX is not set
 # CONFIG_TAU is not set
+# CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_MPC8xxx_GPIO is not set
 
 #
 # Kernel options
@@ -224,6 +217,8 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -238,15 +233,15 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -258,7 +253,6 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
-# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
@@ -271,7 +265,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -339,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -359,11 +354,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -469,7 +463,6 @@ CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
-# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -570,8 +563,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_MESH is not set
-# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
@@ -637,18 +628,22 @@ CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_TR is not set
 
@@ -714,14 +709,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
-# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -757,12 +749,6 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 
-#
-# Mac SMBus host controller drivers
-#
-# CONFIG_I2C_HYDRA is not set
-CONFIG_I2C_POWERMAC=y
-
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
@@ -800,6 +786,7 @@ CONFIG_SENSORS_PCF8574=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -835,7 +822,6 @@ CONFIG_WATCHDOG=y
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_ALIM7101_WDT is not set
 # CONFIG_8xxx_WDT is not set
-# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -861,6 +847,17 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -912,6 +909,8 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -928,6 +927,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -935,6 +936,7 @@ CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -955,7 +957,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -976,6 +977,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -992,7 +994,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1038,17 +1042,21 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1057,6 +1065,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1068,12 +1077,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -1106,6 +1116,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1144,6 +1155,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1219,7 +1231,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1249,13 +1260,15 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
@@ -1267,14 +1280,19 @@ CONFIG_HAVE_ARCH_KGDB=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1347,6 +1365,11 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_CRYPTO_DEV_TALITOS is not set

arch/powerpc/configs/85xx/ksi8560_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 00:52:28 2008
+# Linux kernel version: 2.6.28-rc3
+# Sat Nov  8 12:40:03 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -24,7 +24,7 @@ CONFIG_SPE=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
@@ -104,6 +104,7 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
@@ -117,10 +118,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -147,6 +145,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform support
@@ -181,15 +180,16 @@ CONFIG_MPIC=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_QUICC_ENGINE is not set
 CONFIG_CPM2=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
+# CONFIG_MPC8xxx_GPIO is not set
 
 #
 # Kernel options
 #
 CONFIG_HIGHMEM=y
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -203,6 +203,8 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
@@ -217,15 +219,15 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -311,6 +313,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -331,11 +334,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -454,17 +456,16 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_IDEDISK is not set
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -515,6 +516,9 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
@@ -590,12 +594,6 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
-CONFIG_SERIAL_CPM_SCC1=y
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-# CONFIG_SERIAL_CPM_SMC1 is not set
-# CONFIG_SERIAL_CPM_SMC2 is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -659,6 +657,14 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+
 #
 # Multimedia devices
 #
@@ -692,6 +698,12 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -715,6 +727,7 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -726,13 +739,14 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -762,6 +776,7 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -797,6 +812,7 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -829,7 +845,6 @@ CONFIG_PARTITION_ADVANCED=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -882,15 +897,23 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -899,6 +922,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
 # CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
@@ -910,12 +934,14 @@ CONFIG_HAVE_ARCH_KGDB=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -987,6 +1013,11 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_TALITOS is not set
 CONFIG_PPC_CLOCK=y

arch/powerpc/include/asm/immap_cpm2.h

@@ -554,14 +554,11 @@ typedef struct usb_ctlr {
 	u8	usb_usadr;
 	u8	usb_uscom;
 	u8	res1[1];
-	u16	usb_usep1;
-	u16	usb_usep2;
-	u16	usb_usep3;
-	u16	usb_usep4;
+	__be16  usb_usep[4];
 	u8	res2[4];
-	u16	usb_usber;
+	__be16  usb_usber;
 	u8	res3[2];
-	u16	usb_usbmr;
+	__be16  usb_usbmr;
 	u8	usb_usbs;
 	u8	res4[7];
 } usb_cpm2_t;

arch/powerpc/include/asm/immap_qe.h

@@ -215,10 +215,7 @@ struct usb_ctlr {
 	u8	usb_usadr;
 	u8	usb_uscom;
 	u8	res1[1];
-	__be16	usb_usep1;
-	__be16	usb_usep2;
-	__be16	usb_usep3;
-	__be16	usb_usep4;
+	__be16  usb_usep[4];
 	u8	res2[4];
 	__be16	usb_usber;
 	u8	res3[2];

arch/powerpc/kernel/misc_32.S

@@ -470,6 +470,8 @@ _GLOBAL(_tlbil_pid)
 	mfspr	r3,SPRN_MMUCSR0
 	andi.	r3,r3,MMUCSR0_TLBFI@l
 	bne	1b
+	msync
+	isync
 	blr
 
 /*
@@ -486,6 +488,8 @@ _GLOBAL(_tlbil_va)
 	rlwinm	r4,r4,0,1,31
 	mtspr	SPRN_MAS1,r4
 	tlbwe
+	msync
+	isync
 	blr
 #endif /* CONFIG_FSL_BOOKE */