pwm: sunxi: Add H3 support

H3 PWM controller has same register layout as sun4i driver, so it works
by adding H3 specific data.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: linux-pwm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NMilo Kim <woogyom.kim@gmail.com>
Acked-by: NChen-Yu Tsai <wens@csie.org>
Reviewed-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NThierry Reding <thierry.reding@gmail.com>

Documentation/devicetree/bindings/pwm/pwm-sun4i.txt

@@ -6,6 +6,7 @@ Required properties:
     - "allwinner,sun5i-a10s-pwm"
     - "allwinner,sun5i-a13-pwm"
     - "allwinner,sun7i-a20-pwm"
+    - "allwinner,sun8i-h3-pwm"
   - reg: physical base address and length of the controller's registers
   - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
     the cells format.

drivers/pwm/pwm-sun4i.c

@@ -284,6 +284,12 @@ static const struct sun4i_pwm_data sun4i_pwm_data_a20 = {
 	.npwm = 2,
 };
 
+static const struct sun4i_pwm_data sun4i_pwm_data_h3 = {
+	.has_prescaler_bypass = true,
+	.has_rdy = true,
+	.npwm = 1,
+};
+
 static const struct of_device_id sun4i_pwm_dt_ids[] = {
 	{
 		.compatible = "allwinner,sun4i-a10-pwm",
@@ -297,6 +303,9 @@ static const struct of_device_id sun4i_pwm_dt_ids[] = {
 	}, {
 		.compatible = "allwinner,sun7i-a20-pwm",
 		.data = &sun4i_pwm_data_a20,
+	}, {
+		.compatible = "allwinner,sun8i-h3-pwm",
+		.data = &sun4i_pwm_data_h3,
 	}, {
 		/* sentinel */
 	},