staging: brcm80211: Remove si sb utils from brcmfmac

si/sb utility is removed from Broadcom fullmac driver.
All unused files are removed.
Signed-off-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/staging/brcm80211/brcmfmac/Makefile

@@ -52,12 +52,8 @@ DHDOFILES = \
 	bcmsdh_linux.o	\
 	bcmsdh_sdmmc.o \
 	bcmsdh_sdmmc_linux.o \
-	aiutils.o \
-	siutils.o \
-	sbutils.o \
 	bcmutils.o \
-	bcmwifi.o \
-	hndpmu.o
+	bcmwifi.o
 
 obj-m += brcmfmac.o
 brcmfmac-objs += $(DHDOFILES)

drivers/staging/brcm80211/brcmfmac/bcmsdh.c

@@ -22,7 +22,6 @@
 #include <bcmdevs.h>
 #include <bcmutils.h>
 #include <hndsoc.h>
-#include <siutils.h>
 
 #include <bcmsdh.h>		/* BRCM API for SDIO
 			 clients (such as wl, dhd) */

drivers/staging/brcm80211/brcmfmac/dhd_sdio.c

@@ -28,8 +28,6 @@
 #include <bcmutils.h>
 #include <bcmdevs.h>
 
-#include <siutils.h>
-#include <hndpmu.h>
 #include <hndsoc.h>
 #ifdef DHD_DEBUG
 #include <hndrte_armtrap.h>
@@ -52,7 +50,6 @@
 #include <dhd_dbg.h>
 #include <dhdioctl.h>
 #include <sdiovar.h>
-#include <siutils_priv.h>
 #include <bcmchip.h>
 
 #ifndef DHDSDIO_MEM_DUMP_FNAME

drivers/staging/brcm80211/brcmfmac/hndpmu.c

-#include "../util/hndpmu.c"

drivers/staging/brcm80211/brcmfmac/sbutils.c

-#include "../util/sbutils.c"

drivers/staging/brcm80211/brcmfmac/siutils.c

-#include "../util/siutils.c"

drivers/staging/brcm80211/util/bcmutils.c

@@ -24,7 +24,6 @@
 #include <bcmdefs.h>
 #include <stdarg.h>
 #include <bcmutils.h>
-#include <siutils.h>
 #include <bcmnvram.h>
 #include <bcmdevs.h>
 #include <proto/802.11.h>

drivers/staging/brcm80211/util/sbutils.c

-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/types.h>
-#include <bcmdefs.h>
-#ifdef BRCM_FULLMAC
-#include <linux/netdevice.h>
-#endif
-#include <bcmutils.h>
-#include <siutils.h>
-#include <bcmdevs.h>
-#include <hndsoc.h>
-#include <sbchipc.h>
-#include <pci_core.h>
-#include <pcicfg.h>
-#include <sbpcmcia.h>
-#include "siutils_priv.h"
-
-/* local prototypes */
-static uint _sb_coreidx(si_info_t *sii, u32 sba);
-static uint _sb_scan(si_info_t *sii, u32 sba, void *regs, uint bus,
-		     u32 sbba, uint ncores);
-static u32 _sb_coresba(si_info_t *sii);
-static void *_sb_setcoreidx(si_info_t *sii, uint coreidx);
-
-#define	SET_SBREG(sii, r, mask, val)	\
-		W_SBREG((sii), (r), ((R_SBREG((sii), (r)) & ~(mask)) | (val)))
-#define	REGS2SB(va)	(sbconfig_t *) ((s8 *)(va) + SBCONFIGOFF)
-
-/* sonicsrev */
-#define	SONICS_2_2	(SBIDL_RV_2_2 >> SBIDL_RV_SHIFT)
-#define	SONICS_2_3	(SBIDL_RV_2_3 >> SBIDL_RV_SHIFT)
-
-#define	R_SBREG(sii, sbr)	sb_read_sbreg((sii), (sbr))
-#define	W_SBREG(sii, sbr, v)	sb_write_sbreg((sii), (sbr), (v))
-#define	AND_SBREG(sii, sbr, v)	\
-	W_SBREG((sii), (sbr), (R_SBREG((sii), (sbr)) & (v)))
-#define	OR_SBREG(sii, sbr, v)	\
-	W_SBREG((sii), (sbr), (R_SBREG((sii), (sbr)) | (v)))
-
-static u32 sb_read_sbreg(si_info_t *sii, volatile u32 *sbr)
-{
-	return R_REG(sbr);
-}
-
-static void sb_write_sbreg(si_info_t *sii, volatile u32 *sbr, u32 v)
-{
-	W_REG(sbr, v);
-}
-
-uint sb_coreid(si_t *sih)
-{
-	si_info_t *sii;
-	sbconfig_t *sb;
-
-	sii = SI_INFO(sih);
-	sb = REGS2SB(sii->curmap);
-
-	return (R_SBREG(sii, &sb->sbidhigh) & SBIDH_CC_MASK) >>
-		SBIDH_CC_SHIFT;
-}
-
-/* return core index of the core with address 'sba' */
-static uint _sb_coreidx(si_info_t *sii, u32 sba)
-{
-	uint i;
-
-	for (i = 0; i < sii->numcores; i++)
-		if (sba == sii->coresba[i])
-			return i;
-	return BADIDX;
-}
-
-/* return core address of the current core */
-static u32 _sb_coresba(si_info_t *sii)
-{
-	u32 sbaddr = 0;
-
-	switch (sii->pub.bustype) {
-	case SPI_BUS:
-	case SDIO_BUS:
-		sbaddr = (u32)(unsigned long)sii->curmap;
-		break;
-	default:
-		ASSERT(0);
-		break;
-	}
-
-	return sbaddr;
-}
-
-uint sb_corerev(si_t *sih)
-{
-	si_info_t *sii;
-	sbconfig_t *sb;
-	uint sbidh;
-
-	sii = SI_INFO(sih);
-	sb = REGS2SB(sii->curmap);
-	sbidh = R_SBREG(sii, &sb->sbidhigh);
-
-	return SBCOREREV(sbidh);
-}
-
-bool sb_iscoreup(si_t *sih)
-{
-	si_info_t *sii;
-	sbconfig_t *sb;
-
-	sii = SI_INFO(sih);
-	sb = REGS2SB(sii->curmap);
-
-	return (R_SBREG(sii, &sb->sbtmstatelow) &
-		 (SBTML_RESET | SBTML_REJ_MASK |
-		  (SICF_CLOCK_EN << SBTML_SICF_SHIFT))) ==
-		(SICF_CLOCK_EN << SBTML_SICF_SHIFT);
-}
-
-/*
- * Switch to 'coreidx', issue a single arbitrary 32bit
- * register mask&set operation,
- * switch back to the original core, and return the new value.
- *
- * When using the silicon backplane, no fidleing with interrupts
- * or core switches are needed.
- *
- * Also, when using pci/pcie, we can optimize away the core switching
- * for pci registers
- * and (on newer pci cores) chipcommon registers.
- */
-uint sb_corereg(si_t *sih, uint coreidx, uint regoff, uint mask, uint val)
-{
-	uint origidx = 0;
-	u32 *r = NULL;
-	uint w;
-	uint intr_val = 0;
-	bool fast = false;
-	si_info_t *sii;
-
-	sii = SI_INFO(sih);
-
-	ASSERT(GOODIDX(coreidx));
-	ASSERT(regoff < SI_CORE_SIZE);
-	ASSERT((val & ~mask) == 0);
-
-	if (coreidx >= SI_MAXCORES)
-		return 0;
-
-	if (!fast) {
-		INTR_OFF(sii, intr_val);
-
-		/* save current core index */
-		origidx = si_coreidx(&sii->pub);
-
-		/* switch core */
-		r = (u32 *) ((unsigned char *) sb_setcoreidx(&sii->pub, coreidx) +
-				regoff);
-	}
-	ASSERT(r != NULL);
-
-	/* mask and set */
-	if (mask || val) {
-		if (regoff >= SBCONFIGOFF) {
-			w = (R_SBREG(sii, r) & ~mask) | val;
-			W_SBREG(sii, r, w);
-		} else {
-			w = (R_REG(r) & ~mask) | val;
-			W_REG(r, w);
-		}
-	}
-
-	/* readback */
-	if (regoff >= SBCONFIGOFF)
-		w = R_SBREG(sii, r);
-	else
-		w = R_REG(r);
-
-	if (!fast) {
-		/* restore core index */
-		if (origidx != coreidx)
-			sb_setcoreidx(&sii->pub, origidx);
-
-		INTR_RESTORE(sii, intr_val);
-	}
-
-	return w;
-}
-
-/* Scan the enumeration space to find all cores starting from the given
- * bus 'sbba'. Append coreid and other info to the lists in 'si'. 'sba'
- * is the default core address at chip POR time and 'regs' is the virtual
- * address that the default core is mapped at. 'ncores' is the number of
- * cores expected on bus 'sbba'. It returns the total number of cores
- * starting from bus 'sbba', inclusive.
- */
-#define SB_MAXBUSES	2
-static uint _sb_scan(si_info_t *sii, u32 sba, void *regs, uint bus, u32 sbba,
-		     uint numcores)
-{
-	uint next;
-	uint ncc = 0;
-	uint i;
-
-	if (bus >= SB_MAXBUSES) {
-		SI_ERROR(("_sb_scan: bus 0x%08x at level %d is too deep to "
-			"scan\n", sbba, bus));
-		return 0;
-	}
-	SI_MSG(("_sb_scan: scan bus 0x%08x assume %u cores\n",
-		sbba, numcores));
-
-	/* Scan all cores on the bus starting from core 0.
-	 * Core addresses must be contiguous on each bus.
-	 */
-	for (i = 0, next = sii->numcores;
-	     i < numcores && next < SB_BUS_MAXCORES; i++, next++) {
-		sii->coresba[next] = sbba + (i * SI_CORE_SIZE);
-
-		/* change core to 'next' and read its coreid */
-		sii->curmap = _sb_setcoreidx(sii, next);
-		sii->curidx = next;
-
-		sii->coreid[next] = sb_coreid(&sii->pub);
-
-		/* core specific processing... */
-		/* chipc provides # cores */
-		if (sii->coreid[next] == CC_CORE_ID) {
-			chipcregs_t *cc = (chipcregs_t *) sii->curmap;
-			u32 ccrev = sb_corerev(&sii->pub);
-
-			/* determine numcores - this is the
-				 total # cores in the chip */
-			if (((ccrev == 4) || (ccrev >= 6)))
-				numcores =
-				    (R_REG(&cc->chipid) & CID_CC_MASK)
-				    >> CID_CC_SHIFT;
-			else {
-				/* Older chips */
-				SI_ERROR(("sb_chip2numcores: unsupported chip "
-						  "0x%x\n", sii->pub.chip));
-				ASSERT(0);
-				numcores = 1;
-			}
-
-			SI_VMSG(("_sb_scan: %u cores in the chip %s\n",
-			numcores, sii->pub.issim ? "QT" : ""));
-		}
-		/* scan bridged SB(s) and add results to the end of the list */
-		else if (sii->coreid[next] == OCP_CORE_ID) {
-			sbconfig_t *sb = REGS2SB(sii->curmap);
-			u32 nsbba = R_SBREG(sii, &sb->sbadmatch1);
-			uint nsbcc;
-
-			sii->numcores = next + 1;
-
-			if ((nsbba & 0xfff00000) != SI_ENUM_BASE)
-				continue;
-			nsbba &= 0xfffff000;
-			if (_sb_coreidx(sii, nsbba) != BADIDX)
-				continue;
-
-			nsbcc =
-			    (R_SBREG(sii, &sb->sbtmstatehigh) & 0x000f0000) >>
-			    16;
-			nsbcc = _sb_scan(sii, sba, regs, bus + 1, nsbba, nsbcc);
-			if (sbba == SI_ENUM_BASE)
-				numcores -= nsbcc;
-			ncc += nsbcc;
-		}
-	}
-
-	SI_MSG(("_sb_scan: found %u cores on bus 0x%08x\n", i, sbba));
-
-	sii->numcores = i + ncc;
-	return sii->numcores;
-}
-
-/* scan the sb enumerated space to identify all cores */
-void sb_scan(si_t *sih, void *regs, uint devid)
-{
-	si_info_t *sii;
-	u32 origsba;
-	sbconfig_t *sb;
-
-	sii = SI_INFO(sih);
-	sb = REGS2SB(sii->curmap);
-
-	sii->pub.socirev =
-	    (R_SBREG(sii, &sb->sbidlow) & SBIDL_RV_MASK) >> SBIDL_RV_SHIFT;
-
-	/* Save the current core info and validate it later till we know
-	 * for sure what is good and what is bad.
-	 */
-	origsba = _sb_coresba(sii);
-
-	/* scan all SB(s) starting from SI_ENUM_BASE */
-	sii->numcores = _sb_scan(sii, origsba, regs, 0, SI_ENUM_BASE, 1);
-}
-
-/*
- * This function changes logical "focus" to the indicated core;
- * must be called with interrupts off.
- * Moreover, callers should keep interrupts off during switching out of
- * and back to d11 core
- */
-void *sb_setcoreidx(si_t *sih, uint coreidx)
-{
-	si_info_t *sii;
-
-	sii = SI_INFO(sih);
-
-	if (coreidx >= sii->numcores)
-		return NULL;
-
-	/*
-	 * If the user has provided an interrupt mask enabled function,
-	 * then assert interrupts are disabled before switching the core.
-	 */
-	ASSERT((sii->intrsenabled_fn == NULL)
-	       || !(*(sii)->intrsenabled_fn) ((sii)->intr_arg));
-
-	sii->curmap = _sb_setcoreidx(sii, coreidx);
-	sii->curidx = coreidx;
-
-	return sii->curmap;
-}
-
-/* This function changes the logical "focus" to the indicated core.
- * Return the current core's virtual address.
- */
-static void *_sb_setcoreidx(si_info_t *sii, uint coreidx)
-{
-	u32 sbaddr = sii->coresba[coreidx];
-	void *regs;
-
-	switch (sii->pub.bustype) {
-#ifdef BCMSDIO
-	case SPI_BUS:
-	case SDIO_BUS:
-		/* map new one */
-		if (!sii->regs[coreidx]) {
-			sii->regs[coreidx] = (void *)sbaddr;
-			ASSERT(GOODREGS(sii->regs[coreidx]));
-		}
-		regs = sii->regs[coreidx];
-		break;
-#endif				/* BCMSDIO */
-	default:
-		ASSERT(0);
-		regs = NULL;
-		break;
-	}
-
-	return regs;
-}
-
-void sb_core_disable(si_t *sih, u32 bits)
-{
-	si_info_t *sii;
-	volatile u32 dummy;
-	sbconfig_t *sb;
-
-	sii = SI_INFO(sih);
-
-	ASSERT(GOODREGS(sii->curmap));
-	sb = REGS2SB(sii->curmap);
-
-	/* if core is already in reset, just return */
-	if (R_SBREG(sii, &sb->sbtmstatelow) & SBTML_RESET)
-		return;
-
-	/* if clocks are not enabled, put into reset and return */
-	if ((R_SBREG(sii, &sb->sbtmstatelow) &
-	     (SICF_CLOCK_EN << SBTML_SICF_SHIFT)) == 0)
-		goto disable;
-
-	/* set target reject and spin until busy is clear
-	   (preserve core-specific bits) */
-	OR_SBREG(sii, &sb->sbtmstatelow, SBTML_REJ);
-	dummy = R_SBREG(sii, &sb->sbtmstatelow);
-	udelay(1);
-	SPINWAIT((R_SBREG(sii, &sb->sbtmstatehigh) & SBTMH_BUSY), 100000);
-	if (R_SBREG(sii, &sb->sbtmstatehigh) & SBTMH_BUSY)
-		SI_ERROR(("%s: target state still busy\n", __func__));
-
-	if (R_SBREG(sii, &sb->sbidlow) & SBIDL_INIT) {
-		OR_SBREG(sii, &sb->sbimstate, SBIM_RJ);
-		dummy = R_SBREG(sii, &sb->sbimstate);
-		udelay(1);
-		SPINWAIT((R_SBREG(sii, &sb->sbimstate) & SBIM_BY), 100000);
-	}
-
-	/* set reset and reject while enabling the clocks */
-	W_SBREG(sii, &sb->sbtmstatelow,
-		(((bits | SICF_FGC | SICF_CLOCK_EN) << SBTML_SICF_SHIFT) |
-		 SBTML_REJ | SBTML_RESET));
-	dummy = R_SBREG(sii, &sb->sbtmstatelow);
-	udelay(10);
-
-	/* don't forget to clear the initiator reject bit */
-	if (R_SBREG(sii, &sb->sbidlow) & SBIDL_INIT)
-		AND_SBREG(sii, &sb->sbimstate, ~SBIM_RJ);
-
-disable:
-	/* leave reset and reject asserted */
-	W_SBREG(sii, &sb->sbtmstatelow,
-		((bits << SBTML_SICF_SHIFT) | SBTML_REJ | SBTML_RESET));
-	udelay(1);
-}
-
-/* reset and re-enable a core
- * inputs:
- * bits - core specific bits that are set during and after reset sequence
- * resetbits - core specific bits that are set only during reset sequence
- */
-void sb_core_reset(si_t *sih, u32 bits, u32 resetbits)
-{
-	si_info_t *sii;
-	sbconfig_t *sb;
-	volatile u32 dummy;
-
-	sii = SI_INFO(sih);
-	ASSERT(GOODREGS(sii->curmap));
-	sb = REGS2SB(sii->curmap);
-
-	/*
-	 * Must do the disable sequence first to work for
-	 * arbitrary current core state.
-	 */
-	sb_core_disable(sih, (bits | resetbits));
-
-	/*
-	 * Now do the initialization sequence.
-	 */
-
-	/* set reset while enabling the clock and
-		 forcing them on throughout the core */
-	W_SBREG(sii, &sb->sbtmstatelow,
-		(((bits | resetbits | SICF_FGC | SICF_CLOCK_EN) <<
-		  SBTML_SICF_SHIFT) | SBTML_RESET));
-	dummy = R_SBREG(sii, &sb->sbtmstatelow);
-	udelay(1);
-
-	if (R_SBREG(sii, &sb->sbtmstatehigh) & SBTMH_SERR)
-		W_SBREG(sii, &sb->sbtmstatehigh, 0);
-
-	dummy = R_SBREG(sii, &sb->sbimstate);
-	if (dummy & (SBIM_IBE | SBIM_TO))
-		AND_SBREG(sii, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO));
-
-	/* clear reset and allow it to propagate throughout the core */
-	W_SBREG(sii, &sb->sbtmstatelow,
-		((bits | resetbits | SICF_FGC | SICF_CLOCK_EN) <<
-		 SBTML_SICF_SHIFT));
-	dummy = R_SBREG(sii, &sb->sbtmstatelow);
-	udelay(1);
-
-	/* leave clock enabled */
-	W_SBREG(sii, &sb->sbtmstatelow,
-		((bits | SICF_CLOCK_EN) << SBTML_SICF_SHIFT));
-	dummy = R_SBREG(sii, &sb->sbtmstatelow);
-	udelay(1);
-}