e1000e: cleanup whitespace and indentation

Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/e1000e/82571.c

@@ -1269,19 +1269,17 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
 		reg |= E1000_PBA_ECC_CORR_EN;
 		ew32(PBA_ECC, reg);
 	}
+
 	/*
 	 * Workaround for hardware errata.
 	 * Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572
 	 */
-
-        if ((hw->mac.type == e1000_82571) ||
-           (hw->mac.type == e1000_82572)) {
+	if ((hw->mac.type == e1000_82571) || (hw->mac.type == e1000_82572)) {
 		reg = er32(CTRL_EXT);
 		reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN;
 		ew32(CTRL_EXT, reg);
 	}
 
-
 	/* PCI-Ex Control Registers */
 	switch (hw->mac.type) {
 	case e1000_82574:

drivers/net/ethernet/intel/e1000e/ich8lan.c

@@ -1230,8 +1230,7 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
 	u32 reg = 0;
 	u16 kmrn_reg = 0;
 
-	ret_val = e1000e_read_kmrn_reg_locked(hw,
-	                                     E1000_KMRNCTRLSTA_K1_CONFIG,
+	ret_val = e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
 					      &kmrn_reg);
 	if (ret_val)
 		return ret_val;
@@ -1241,8 +1240,7 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
 	else
 		kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE;
 
-	ret_val = e1000e_write_kmrn_reg_locked(hw,
-	                                      E1000_KMRNCTRLSTA_K1_CONFIG,
+	ret_val = e1000e_write_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
 					       kmrn_reg);
 	if (ret_val)
 		return ret_val;

drivers/net/ethernet/intel/e1000e/netdev.c

@@ -3262,6 +3262,7 @@ static void e1000e_set_rx_mode(struct net_device *netdev)
 		e1000e_vlan_filter_disable(adapter);
 	} else {
 		int count;
+
 		if (netdev->flags & IFF_ALLMULTI) {
 			rctl |= E1000_RCTL_MPE;
 		} else {
@@ -6103,7 +6104,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	const struct e1000_info *ei = e1000_info_tbl[ent->driver_data];
 	resource_size_t mmio_start, mmio_len;
 	resource_size_t flash_start, flash_len;
-
 	static int cards_found;
 	u16 aspm_disable_flag = 0;
 	int i, err, pci_using_dac;
@@ -6347,11 +6347,11 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	} else if (adapter->flags & FLAG_APME_IN_CTRL3) {
 		if (adapter->flags & FLAG_APME_CHECK_PORT_B &&
 		    (adapter->hw.bus.func == 1))
-			e1000_read_nvm(&adapter->hw,
-				NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+			e1000_read_nvm(&adapter->hw, NVM_INIT_CONTROL3_PORT_B,
+				       1, &eeprom_data);
 		else
-			e1000_read_nvm(&adapter->hw,
-				NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
+			e1000_read_nvm(&adapter->hw, NVM_INIT_CONTROL3_PORT_A,
+				       1, &eeprom_data);
 	}
 
 	/* fetch WoL from EEPROM */

drivers/net/ethernet/intel/e1000e/phy.c

@@ -1172,9 +1172,7 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw)
 	 * Check link status. Wait up to 100 microseconds for link to become
 	 * valid.
 	 */
-	ret_val = e1000e_phy_has_link_generic(hw,
-					     COPPER_LINK_UP_LIMIT,
-					     10,
+	ret_val = e1000e_phy_has_link_generic(hw, COPPER_LINK_UP_LIMIT, 10,
 					      &link);
 	if (ret_val)
 		return ret_val;
@@ -1237,10 +1235,8 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
 	if (phy->autoneg_wait_to_complete) {
 		e_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
 
-		ret_val = e1000e_phy_has_link_generic(hw,
-						     PHY_FORCE_LIMIT,
-						     100000,
-						     &link);
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
 		if (ret_val)
 			return ret_val;
 
@@ -1248,10 +1244,8 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
 			e_dbg("Link taking longer than expected.\n");
 
 		/* Try once more */
-		ret_val = e1000e_phy_has_link_generic(hw,
-						     PHY_FORCE_LIMIT,
-						     100000,
-						     &link);
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
 	}
 
 	return ret_val;
@@ -1412,10 +1406,8 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
 	if (phy->autoneg_wait_to_complete) {
 		e_dbg("Waiting for forced speed/duplex link on IFE phy.\n");
 
-		ret_val = e1000e_phy_has_link_generic(hw,
-		                                     PHY_FORCE_LIMIT,
-		                                     100000,
-		                                     &link);
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
 		if (ret_val)
 			return ret_val;
 
@@ -1423,10 +1415,8 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
 			e_dbg("Link taking longer than expected.\n");
 
 		/* Try once more */
-		ret_val = e1000e_phy_has_link_generic(hw,
-		                                     PHY_FORCE_LIMIT,
-		                                     100000,
-		                                     &link);
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
 		if (ret_val)
 			return ret_val;
 	}
@@ -2167,6 +2157,7 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
 s32 e1000e_get_cfg_done(struct e1000_hw *hw)
 {
 	mdelay(10);
+
 	return 0;
 }
 
@@ -3155,12 +3146,10 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	data &= BM_CS_STATUS_LINK_UP |
-	        BM_CS_STATUS_RESOLVED |
+	data &= BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED |
 		BM_CS_STATUS_SPEED_MASK;
 
-	if (data != (BM_CS_STATUS_LINK_UP |
-	             BM_CS_STATUS_RESOLVED |
+	if (data != (BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED |
 		     BM_CS_STATUS_SPEED_1000))
 		return 0;
 
@@ -3227,10 +3216,8 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
 	if (phy->autoneg_wait_to_complete) {
 		e_dbg("Waiting for forced speed/duplex link on 82577 phy\n");
 
-		ret_val = e1000e_phy_has_link_generic(hw,
-		                                     PHY_FORCE_LIMIT,
-		                                     100000,
-		                                     &link);
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
 		if (ret_val)
 			return ret_val;
 
@@ -3238,10 +3225,8 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
 			e_dbg("Link taking longer than expected.\n");
 
 		/* Try once more */
-		ret_val = e1000e_phy_has_link_generic(hw,
-		                                     PHY_FORCE_LIMIT,
-		                                     100000,
-		                                     &link);
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
 	}
 
 	return ret_val;