Merge branch 'ib-extcon-phy-4.9' of...

Merge branch 'ib-extcon-phy-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into next

drivers/extcon/extcon-adc-jack.c

@@ -3,6 +3,9 @@
  *
  * Analog Jack extcon driver with ADC-based detection capability.
  *
+ * Copyright (C) 2016 Samsung Electronics
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ *
  * Copyright (C) 2012 Samsung Electronics
  * MyungJoo Ham <myungjoo.ham@samsung.com>
  *
@@ -58,7 +61,7 @@ static void adc_jack_handler(struct work_struct *work)
 	struct adc_jack_data *data = container_of(to_delayed_work(work),
 			struct adc_jack_data,
 			handler);
-	u32 state = 0;
+	struct adc_jack_cond *def;
 	int ret, adc_val;
 	int i;
 
@@ -70,17 +73,18 @@ static void adc_jack_handler(struct work_struct *work)
 
 	/* Get state from adc value with adc_conditions */
 	for (i = 0; i < data->num_conditions; i++) {
-		struct adc_jack_cond *def = &data->adc_conditions[i];
-		if (!def->state)
-			break;
+		def = &data->adc_conditions[i];
 		if (def->min_adc <= adc_val && def->max_adc >= adc_val) {
-			state = def->state;
-			break;
+			extcon_set_cable_state_(data->edev, def->id, true);
+			return;
 		}
 	}
-	/* if no def has met, it means state = 0 (no cables attached) */
 
-	extcon_set_state(data->edev, state);
+	/* Set the detached state if adc value is not included in the range */
+	for (i = 0; i < data->num_conditions; i++) {
+		def = &data->adc_conditions[i];
+		extcon_set_cable_state_(data->edev, def->id, false);
+	}
 }
 
 static irqreturn_t adc_jack_irq_thread(int irq, void *_data)
@@ -114,16 +118,14 @@ static int adc_jack_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	if (!pdata->adc_conditions ||
-			!pdata->adc_conditions[0].state) {
+	if (!pdata->adc_conditions) {
 		dev_err(&pdev->dev, "error: adc_conditions not defined.\n");
 		return -EINVAL;
 	}
 	data->adc_conditions = pdata->adc_conditions;
 
 	/* Check the length of array and set num_conditions */
-	for (i = 0; data->adc_conditions[i].state; i++)
-		;
+	for (i = 0; data->adc_conditions[i].id != EXTCON_NONE; i++);
 	data->num_conditions = i;
 
 	data->chan = iio_channel_get(&pdev->dev, pdata->consumer_channel);
@@ -158,6 +160,7 @@ static int adc_jack_probe(struct platform_device *pdev)
 	if (data->wakeup_source)
 		device_init_wakeup(&pdev->dev, 1);
 
+	adc_jack_handler(&data->handler.work);
 	return 0;
 }
 

drivers/extcon/extcon-arizona.c

@@ -183,7 +183,7 @@ static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info,
 		if (clamp)
 			val = ARIZONA_RMV_SHRT_HP1L;
 		break;
-	};
+	}
 
 	snd_soc_dapm_mutex_lock(arizona->dapm);
 
@@ -1149,10 +1149,13 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 					 info->micd_ranges[i].key, 0);
 		input_sync(info->input);
 
-		ret = extcon_update_state(info->edev, 0xffffffff, 0);
-		if (ret != 0)
-			dev_err(arizona->dev, "Removal report failed: %d\n",
-				ret);
+		for (i = 0; i < ARRAY_SIZE(arizona_cable) - 1; i++) {
+			ret = extcon_set_cable_state_(info->edev,
+					arizona_cable[i], false);
+			if (ret != 0)
+				dev_err(arizona->dev,
+					"Removal report failed: %d\n", ret);
+		}
 
 		regmap_update_bits(arizona->regmap,
 				   ARIZONA_JACK_DETECT_DEBOUNCE,

drivers/extcon/extcon-gpio.c

@@ -49,7 +49,7 @@ static void gpio_extcon_work(struct work_struct *work)
 	state = gpiod_get_value_cansleep(data->id_gpiod);
 	if (data->pdata->gpio_active_low)
 		state = !state;
-	extcon_set_state(data->edev, state);
+	extcon_set_cable_state_(data->edev, data->pdata->extcon_id, state);
 }
 
 static irqreturn_t gpio_irq_handler(int irq, void *dev_id)

drivers/extcon/extcon.c

@@ -38,43 +38,159 @@
 #define SUPPORTED_CABLE_MAX	32
 #define CABLE_NAME_MAX		30
 
-static const char *extcon_name[] =  {
-	[EXTCON_NONE]			= "NONE",
+struct __extcon_info {
+	unsigned int type;
+	unsigned int id;
+	const char *name;
+
+} extcon_info[] = {
+	[EXTCON_NONE] = {
+		.type = EXTCON_TYPE_MISC,
+		.id = EXTCON_NONE,
+		.name = "NONE",
+	},
 
 	/* USB external connector */
-	[EXTCON_USB]			= "USB",
-	[EXTCON_USB_HOST]		= "USB-HOST",
+	[EXTCON_USB] = {
+		.type = EXTCON_TYPE_USB,
+		.id = EXTCON_USB,
+		.name = "USB",
+	},
+	[EXTCON_USB_HOST] = {
+		.type = EXTCON_TYPE_USB,
+		.id = EXTCON_USB_HOST,
+		.name = "USB_HOST",
+	},
 
 	/* Charging external connector */
-	[EXTCON_CHG_USB_SDP]		= "SDP",
-	[EXTCON_CHG_USB_DCP]		= "DCP",
-	[EXTCON_CHG_USB_CDP]		= "CDP",
-	[EXTCON_CHG_USB_ACA]		= "ACA",
-	[EXTCON_CHG_USB_FAST]		= "FAST-CHARGER",
-	[EXTCON_CHG_USB_SLOW]		= "SLOW-CHARGER",
+	[EXTCON_CHG_USB_SDP] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_SDP,
+		.name = "SDP",
+	},
+	[EXTCON_CHG_USB_DCP] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_DCP,
+		.name = "DCP",
+	},
+	[EXTCON_CHG_USB_CDP] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_CDP,
+		.name = "CDP",
+	},
+	[EXTCON_CHG_USB_ACA] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_ACA,
+		.name = "ACA",
+	},
+	[EXTCON_CHG_USB_FAST] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_FAST,
+		.name = "FAST-CHARGER",
+	},
+	[EXTCON_CHG_USB_SLOW] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_SLOW,
+		.name = "SLOW-CHARGER",
+	},
+	[EXTCON_CHG_WPT] = {
+		.type = EXTCON_TYPE_CHG,
+		.id = EXTCON_CHG_WPT,
+		.name = "WPT",
+	},
 
 	/* Jack external connector */
-	[EXTCON_JACK_MICROPHONE]	= "MICROPHONE",
-	[EXTCON_JACK_HEADPHONE]		= "HEADPHONE",
-	[EXTCON_JACK_LINE_IN]		= "LINE-IN",
-	[EXTCON_JACK_LINE_OUT]		= "LINE-OUT",
-	[EXTCON_JACK_VIDEO_IN]		= "VIDEO-IN",
-	[EXTCON_JACK_VIDEO_OUT]		= "VIDEO-OUT",
-	[EXTCON_JACK_SPDIF_IN]		= "SPDIF-IN",
-	[EXTCON_JACK_SPDIF_OUT]		= "SPDIF-OUT",
+	[EXTCON_JACK_MICROPHONE] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_MICROPHONE,
+		.name = "MICROPHONE",
+	},
+	[EXTCON_JACK_HEADPHONE] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_HEADPHONE,
+		.name = "HEADPHONE",
+	},
+	[EXTCON_JACK_LINE_IN] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_LINE_IN,
+		.name = "LINE-IN",
+	},
+	[EXTCON_JACK_LINE_OUT] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_LINE_OUT,
+		.name = "LINE-OUT",
+	},
+	[EXTCON_JACK_VIDEO_IN] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_VIDEO_IN,
+		.name = "VIDEO-IN",
+	},
+	[EXTCON_JACK_VIDEO_OUT] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_VIDEO_OUT,
+		.name = "VIDEO-OUT",
+	},
+	[EXTCON_JACK_SPDIF_IN] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_SPDIF_IN,
+		.name = "SPDIF-IN",
+	},
+	[EXTCON_JACK_SPDIF_OUT] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_SPDIF_OUT,
+		.name = "SPDIF-OUT",
+	},
 
 	/* Display external connector */
-	[EXTCON_DISP_HDMI]		= "HDMI",
-	[EXTCON_DISP_MHL]		= "MHL",
-	[EXTCON_DISP_DVI]		= "DVI",
-	[EXTCON_DISP_VGA]		= "VGA",
+	[EXTCON_DISP_HDMI] = {
+		.type = EXTCON_TYPE_DISP,
+		.id = EXTCON_DISP_HDMI,
+		.name = "HDMI",
+	},
+	[EXTCON_DISP_MHL] = {
+		.type = EXTCON_TYPE_DISP,
+		.id = EXTCON_DISP_MHL,
+		.name = "MHL",
+	},
+	[EXTCON_DISP_DVI] = {
+		.type = EXTCON_TYPE_DISP,
+		.id = EXTCON_DISP_DVI,
+		.name = "DVI",
+	},
+	[EXTCON_DISP_VGA] = {
+		.type = EXTCON_TYPE_DISP,
+		.id = EXTCON_DISP_VGA,
+		.name = "VGA",
+	},
+	[EXTCON_DISP_DP] = {
+		.type = EXTCON_TYPE_DISP | EXTCON_TYPE_USB,
+		.id = EXTCON_DISP_DP,
+		.name = "DP",
+	},
+	[EXTCON_DISP_HMD] = {
+		.type = EXTCON_TYPE_DISP | EXTCON_TYPE_USB,
+		.id = EXTCON_DISP_HMD,
+		.name = "HMD",
+	},
 
 	/* Miscellaneous external connector */
-	[EXTCON_DOCK]			= "DOCK",
-	[EXTCON_JIG]			= "JIG",
-	[EXTCON_MECHANICAL]		= "MECHANICAL",
-
-	NULL,
+	[EXTCON_DOCK] = {
+		.type = EXTCON_TYPE_MISC,
+		.id = EXTCON_DOCK,
+		.name = "DOCK",
+	},
+	[EXTCON_JIG] = {
+		.type = EXTCON_TYPE_MISC,
+		.id = EXTCON_JIG,
+		.name = "JIG",
+	},
+	[EXTCON_MECHANICAL] = {
+		.type = EXTCON_TYPE_MISC,
+		.id = EXTCON_MECHANICAL,
+		.name = "MECHANICAL",
+	},
+
+	{ /* sentinel */ }
 };
 
 /**
@@ -95,6 +211,16 @@ struct extcon_cable {
 	struct device_attribute attr_state;
 
 	struct attribute *attrs[3]; /* to be fed to attr_g.attrs */
+
+	union extcon_property_value usb_propval[EXTCON_PROP_USB_CNT];
+	union extcon_property_value chg_propval[EXTCON_PROP_CHG_CNT];
+	union extcon_property_value jack_propval[EXTCON_PROP_JACK_CNT];
+	union extcon_property_value disp_propval[EXTCON_PROP_DISP_CNT];
+
+	unsigned long usb_bits[BITS_TO_LONGS(EXTCON_PROP_USB_CNT)];
+	unsigned long chg_bits[BITS_TO_LONGS(EXTCON_PROP_CHG_CNT)];
+	unsigned long jack_bits[BITS_TO_LONGS(EXTCON_PROP_JACK_CNT)];
+	unsigned long disp_bits[BITS_TO_LONGS(EXTCON_PROP_DISP_CNT)];
 };
 
 static struct class *extcon_class;
@@ -147,14 +273,93 @@ static int find_cable_index_by_id(struct extcon_dev *edev, const unsigned int id
 	return -EINVAL;
 }
 
-static bool is_extcon_changed(u32 prev, u32 new, int idx, bool *attached)
+static int get_extcon_type(unsigned int prop)
 {
-	if (((prev >> idx) & 0x1) != ((new >> idx) & 0x1)) {
-		*attached = ((new >> idx) & 0x1) ? true : false;
-		return true;
+	switch (prop) {
+	case EXTCON_PROP_USB_MIN ... EXTCON_PROP_USB_MAX:
+		return EXTCON_TYPE_USB;
+	case EXTCON_PROP_CHG_MIN ... EXTCON_PROP_CHG_MAX:
+		return EXTCON_TYPE_CHG;
+	case EXTCON_PROP_JACK_MIN ... EXTCON_PROP_JACK_MAX:
+		return EXTCON_TYPE_JACK;
+	case EXTCON_PROP_DISP_MIN ... EXTCON_PROP_DISP_MAX:
+		return EXTCON_TYPE_DISP;
+	default:
+		return -EINVAL;
 	}
+}
+
+static bool is_extcon_attached(struct extcon_dev *edev, unsigned int index)
+{
+	return !!(edev->state & BIT(index));
+}
+
+static bool is_extcon_changed(struct extcon_dev *edev, int index,
+				bool new_state)
+{
+	int state = !!(edev->state & BIT(index));
+	return (state != new_state);
+}
+
+static bool is_extcon_property_supported(unsigned int id, unsigned int prop)
+{
+	int type;
+
+	/* Check whether the property is supported or not. */
+	type = get_extcon_type(prop);
+	if (type < 0)
+		return false;
 
-	return false;
+	/* Check whether a specific extcon id supports the property or not. */
+	return !!(extcon_info[id].type & type);
+}
+
+static int is_extcon_property_capability(struct extcon_dev *edev,
+				unsigned int id, int index,unsigned int prop)
+{
+	struct extcon_cable *cable;
+	int type, ret;
+
+	/* Check whether the property is supported or not. */
+	type = get_extcon_type(prop);
+	if (type < 0)
+		return type;
+
+	cable = &edev->cables[index];
+
+	switch (type) {
+	case EXTCON_TYPE_USB:
+		ret = test_bit(prop - EXTCON_PROP_USB_MIN, cable->usb_bits);
+		break;
+	case EXTCON_TYPE_CHG:
+		ret = test_bit(prop - EXTCON_PROP_CHG_MIN, cable->chg_bits);
+		break;
+	case EXTCON_TYPE_JACK:
+		ret = test_bit(prop - EXTCON_PROP_JACK_MIN, cable->jack_bits);
+		break;
+	case EXTCON_TYPE_DISP:
+		ret = test_bit(prop - EXTCON_PROP_DISP_MIN, cable->disp_bits);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void init_property(struct extcon_dev *edev, unsigned int id, int index)
+{
+	unsigned int type = extcon_info[id].type;
+	struct extcon_cable *cable = &edev->cables[index];
+
+	if (EXTCON_TYPE_USB & type)
+		memset(cable->usb_propval, 0, sizeof(cable->usb_propval));
+	if (EXTCON_TYPE_CHG & type)
+		memset(cable->chg_propval, 0, sizeof(cable->chg_propval));
+	if (EXTCON_TYPE_JACK & type)
+		memset(cable->jack_propval, 0, sizeof(cable->jack_propval));
+	if (EXTCON_TYPE_DISP & type)
+		memset(cable->disp_propval, 0, sizeof(cable->disp_propval));
 }
 
 static ssize_t state_show(struct device *dev, struct device_attribute *attr,
@@ -168,32 +373,13 @@ static ssize_t state_show(struct device *dev, struct device_attribute *attr,
 
 	for (i = 0; i < edev->max_supported; i++) {
 		count += sprintf(buf + count, "%s=%d\n",
-				extcon_name[edev->supported_cable[i]],
+				extcon_info[edev->supported_cable[i]].name,
 				 !!(edev->state & (1 << i)));
 	}
 
 	return count;
 }
-
-static ssize_t state_store(struct device *dev, struct device_attribute *attr,
-			   const char *buf, size_t count)
-{
-	u32 state;
-	ssize_t ret = 0;
-	struct extcon_dev *edev = dev_get_drvdata(dev);
-
-	ret = sscanf(buf, "0x%x", &state);
-	if (ret == 0)
-		ret = -EINVAL;
-	else
-		ret = extcon_set_state(edev, state);
-
-	if (ret < 0)
-		return ret;
-
-	return count;
-}
-static DEVICE_ATTR_RW(state);
+static DEVICE_ATTR_RO(state);
 
 static ssize_t name_show(struct device *dev, struct device_attribute *attr,
 		char *buf)
@@ -212,7 +398,7 @@ static ssize_t cable_name_show(struct device *dev,
 	int i = cable->cable_index;
 
 	return sprintf(buf, "%s\n",
-			extcon_name[cable->edev->supported_cable[i]]);
+			extcon_info[cable->edev->supported_cable[i]].name);
 }
 
 static ssize_t cable_state_show(struct device *dev,
@@ -224,26 +410,17 @@ static ssize_t cable_state_show(struct device *dev,
 	int i = cable->cable_index;
 
 	return sprintf(buf, "%d\n",
-		       extcon_get_cable_state_(cable->edev,
-					       cable->edev->supported_cable[i]));
+		extcon_get_state(cable->edev, cable->edev->supported_cable[i]));
 }
 
 /**
- * extcon_update_state() - Update the cable attach states of the extcon device
- *			   only for the masked bits.
- * @edev:	the extcon device
- * @mask:	the bit mask to designate updated bits.
- * @state:	new cable attach status for @edev
- *
- * Changing the state sends uevent with environment variable containing
- * the name of extcon device (envp[0]) and the state output (envp[1]).
- * Tizen uses this format for extcon device to get events from ports.
- * Android uses this format as well.
+ * extcon_sync()	- Synchronize the states for both the attached/detached
+ * @edev:		the extcon device that has the cable.
  *
- * Note that the notifier provides which bits are changed in the state
- * variable with the val parameter (second) to the callback.
+ * This function send a notification to synchronize the all states of a
+ * specific external connector
  */
-int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
+int extcon_sync(struct extcon_dev *edev, unsigned int id)
 {
 	char name_buf[120];
 	char state_buf[120];
@@ -252,100 +429,102 @@ int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
 	int env_offset = 0;
 	int length;
 	int index;
+	int state;
 	unsigned long flags;
-	bool attached;
 
 	if (!edev)
 		return -EINVAL;
 
-	spin_lock_irqsave(&edev->lock, flags);
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
 
-	if (edev->state != ((edev->state & ~mask) | (state & mask))) {
-		u32 old_state;
+	spin_lock_irqsave(&edev->lock, flags);
 
-		if (check_mutually_exclusive(edev, (edev->state & ~mask) |
-						   (state & mask))) {
-			spin_unlock_irqrestore(&edev->lock, flags);
-			return -EPERM;
-		}
+	state = !!(edev->state & BIT(index));
+	raw_notifier_call_chain(&edev->nh[index], state, edev);
 
-		old_state = edev->state;
-		edev->state &= ~mask;
-		edev->state |= state & mask;
+	/* This could be in interrupt handler */
+	prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
+	if (!prop_buf) {
+		/* Unlock early before uevent */
+		spin_unlock_irqrestore(&edev->lock, flags);
 
-		for (index = 0; index < edev->max_supported; index++) {
-			if (is_extcon_changed(old_state, edev->state, index,
-					      &attached))
-				raw_notifier_call_chain(&edev->nh[index],
-							attached, edev);
-		}
+		dev_err(&edev->dev, "out of memory in extcon_set_state\n");
+		kobject_uevent(&edev->dev.kobj, KOBJ_CHANGE);
 
-		/* This could be in interrupt handler */
-		prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
-		if (prop_buf) {
-			length = name_show(&edev->dev, NULL, prop_buf);
-			if (length > 0) {
-				if (prop_buf[length - 1] == '\n')
-					prop_buf[length - 1] = 0;
-				snprintf(name_buf, sizeof(name_buf),
-					"NAME=%s", prop_buf);
-				envp[env_offset++] = name_buf;
-			}
-			length = state_show(&edev->dev, NULL, prop_buf);
-			if (length > 0) {
-				if (prop_buf[length - 1] == '\n')
-					prop_buf[length - 1] = 0;
-				snprintf(state_buf, sizeof(state_buf),
-					"STATE=%s", prop_buf);
-				envp[env_offset++] = state_buf;
-			}
-			envp[env_offset] = NULL;
-			/* Unlock early before uevent */
-			spin_unlock_irqrestore(&edev->lock, flags);
+		return 0;
+	}
 
-			kobject_uevent_env(&edev->dev.kobj, KOBJ_CHANGE, envp);
-			free_page((unsigned long)prop_buf);
-		} else {
-			/* Unlock early before uevent */
-			spin_unlock_irqrestore(&edev->lock, flags);
+	length = name_show(&edev->dev, NULL, prop_buf);
+	if (length > 0) {
+		if (prop_buf[length - 1] == '\n')
+			prop_buf[length - 1] = 0;
+		snprintf(name_buf, sizeof(name_buf), "NAME=%s", prop_buf);
+		envp[env_offset++] = name_buf;
+	}
 
-			dev_err(&edev->dev, "out of memory in extcon_set_state\n");
-			kobject_uevent(&edev->dev.kobj, KOBJ_CHANGE);
-		}
-	} else {
-		/* No changes */
-		spin_unlock_irqrestore(&edev->lock, flags);
+	length = state_show(&edev->dev, NULL, prop_buf);
+	if (length > 0) {
+		if (prop_buf[length - 1] == '\n')
+			prop_buf[length - 1] = 0;
+		snprintf(state_buf, sizeof(state_buf), "STATE=%s", prop_buf);
+		envp[env_offset++] = state_buf;
 	}
+	envp[env_offset] = NULL;
+
+	/* Unlock early before uevent */
+	spin_unlock_irqrestore(&edev->lock, flags);
+	kobject_uevent_env(&edev->dev.kobj, KOBJ_CHANGE, envp);
+	free_page((unsigned long)prop_buf);
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(extcon_update_state);
+EXPORT_SYMBOL_GPL(extcon_sync);
 
 /**
- * extcon_set_state() - Set the cable attach states of the extcon device.
- * @edev:	the extcon device
- * @state:	new cable attach status for @edev
- *
- * Note that notifier provides which bits are changed in the state
- * variable with the val parameter (second) to the callback.
+ * extcon_get_state() - Get the state of a external connector.
+ * @edev:	the extcon device that has the cable.
+ * @id:		the unique id of each external connector in extcon enumeration.
  */
-int extcon_set_state(struct extcon_dev *edev, u32 state)
+int extcon_get_state(struct extcon_dev *edev, const unsigned int id)
 {
+	int index, state;
+	unsigned long flags;
+
 	if (!edev)
 		return -EINVAL;
 
-	return extcon_update_state(edev, 0xffffffff, state);
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	spin_lock_irqsave(&edev->lock, flags);
+	state = is_extcon_attached(edev, index);
+	spin_unlock_irqrestore(&edev->lock, flags);
+
+	return state;
 }
-EXPORT_SYMBOL_GPL(extcon_set_state);
+EXPORT_SYMBOL_GPL(extcon_get_state);
 
 /**
- * extcon_get_cable_state_() - Get the status of a specific cable.
- * @edev:	the extcon device that has the cable.
- * @id:		the unique id of each external connector in extcon enumeration.
+ * extcon_set_state() - Set the state of a external connector.
+ *			without a notification.
+ * @edev:		the extcon device that has the cable.
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @state:		the new cable status. The default semantics is
+ *			true: attached / false: detached.
+ *
+ * This function only set the state of a external connector without
+ * a notification. To synchronize the data of a external connector,
+ * use extcon_set_state_sync() and extcon_sync().
  */
-int extcon_get_cable_state_(struct extcon_dev *edev, const unsigned int id)
+int extcon_set_state(struct extcon_dev *edev, unsigned int id,
+				bool cable_state)
 {
-	int index;
+	unsigned long flags;
+	int index, ret = 0;
 
 	if (!edev)
 		return -EINVAL;
@@ -354,41 +533,338 @@ int extcon_get_cable_state_(struct extcon_dev *edev, const unsigned int id)
 	if (index < 0)
 		return index;
 
-	if (edev->max_supported && edev->max_supported <= index)
-		return -EINVAL;
+	spin_lock_irqsave(&edev->lock, flags);
+
+	/* Check whether the external connector's state is changed. */
+	if (!is_extcon_changed(edev, index, cable_state))
+		goto out;
+
+	if (check_mutually_exclusive(edev,
+		(edev->state & ~BIT(index)) | (cable_state & BIT(index)))) {
+		ret = -EPERM;
+		goto out;
+	}
+
+	/*
+	 * Initialize the value of extcon property before setting
+	 * the detached state for an external connector.
+	 */
+	if (!cable_state)
+		init_property(edev, id, index);
+
+	/* Update the state for a external connector. */
+	if (cable_state)
+		edev->state |= BIT(index);
+	else
+		edev->state &= ~(BIT(index));
+out:
+	spin_unlock_irqrestore(&edev->lock, flags);
 
-	return !!(edev->state & (1 << index));
+	return ret;
 }
-EXPORT_SYMBOL_GPL(extcon_get_cable_state_);
+EXPORT_SYMBOL_GPL(extcon_set_state);
 
 /**
- * extcon_set_cable_state_() - Set the status of a specific cable.
+ * extcon_set_state_sync() - Set the state of a external connector
+ *			with a notification.
  * @edev:		the extcon device that has the cable.
  * @id:			the unique id of each external connector
  *			in extcon enumeration.
  * @state:		the new cable status. The default semantics is
  *			true: attached / false: detached.
+ *
+ * This function set the state of external connector and synchronize the data
+ * by usning a notification.
  */
-int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
+int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
 				bool cable_state)
 {
-	u32 state;
+	int ret, index;
+	unsigned long flags;
+
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	/* Check whether the external connector's state is changed. */
+	spin_lock_irqsave(&edev->lock, flags);
+	ret = is_extcon_changed(edev, index, cable_state);
+	spin_unlock_irqrestore(&edev->lock, flags);
+	if (!ret)
+		return 0;
+
+	ret = extcon_set_state(edev, id, cable_state);
+	if (ret < 0)
+		return ret;
+
+	return extcon_sync(edev, id);
+}
+EXPORT_SYMBOL_GPL(extcon_set_state_sync);
+
+/**
+ * extcon_get_property() - Get the property value of a specific cable.
+ * @edev:		the extcon device that has the cable.
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @prop:		the property id among enum extcon_property.
+ * @prop_val:		the pointer which store the value of property.
+ *
+ * When getting the property value of external connector, the external connector
+ * should be attached. If detached state, function just return 0 without
+ * property value. Also, the each property should be included in the list of
+ * supported properties according to the type of external connectors.
+ *
+ * Returns 0 if success or error number if fail
+ */
+int extcon_get_property(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value *prop_val)
+{
+	struct extcon_cable *cable;
+	unsigned long flags;
+	int index, ret = 0;
+
+	*prop_val = (union extcon_property_value)(0);
+
+	if (!edev)
+		return -EINVAL;
+
+	/* Check whether the property is supported or not */
+	if (!is_extcon_property_supported(id, prop))
+		return -EINVAL;
+
+	/* Find the cable index of external connector by using id */
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	spin_lock_irqsave(&edev->lock, flags);
+
+	/* Check whether the property is available or not. */
+	if (!is_extcon_property_capability(edev, id, index, prop)) {
+		spin_unlock_irqrestore(&edev->lock, flags);
+		return -EPERM;
+	}
+
+	/*
+	 * Check whether the external connector is attached.
+	 * If external connector is detached, the user can not
+	 * get the property value.
+	 */
+	if (!is_extcon_attached(edev, index)) {
+		spin_unlock_irqrestore(&edev->lock, flags);
+		return 0;
+	}
+
+	cable = &edev->cables[index];
+
+	/* Get the property value according to extcon type */
+	switch (prop) {
+	case EXTCON_PROP_USB_MIN ... EXTCON_PROP_USB_MAX:
+		*prop_val = cable->usb_propval[prop - EXTCON_PROP_USB_MIN];
+		break;
+	case EXTCON_PROP_CHG_MIN ... EXTCON_PROP_CHG_MAX:
+		*prop_val = cable->chg_propval[prop - EXTCON_PROP_CHG_MIN];
+		break;
+	case EXTCON_PROP_JACK_MIN ... EXTCON_PROP_JACK_MAX:
+		*prop_val = cable->jack_propval[prop - EXTCON_PROP_JACK_MIN];
+		break;
+	case EXTCON_PROP_DISP_MIN ... EXTCON_PROP_DISP_MAX:
+		*prop_val = cable->disp_propval[prop - EXTCON_PROP_DISP_MIN];
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock_irqrestore(&edev->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(extcon_get_property);
+
+/**
+ * extcon_set_property() - Set the property value of a specific cable.
+ * @edev:		the extcon device that has the cable.
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @prop:		the property id among enum extcon_property.
+ * @prop_val:		the pointer including the new value of property.
+ *
+ * The each property should be included in the list of supported properties
+ * according to the type of external connectors.
+ *
+ * Returns 0 if success or error number if fail
+ */
+int extcon_set_property(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value prop_val)
+{
+	struct extcon_cable *cable;
+	unsigned long flags;
+	int index, ret = 0;
+
+	if (!edev)
+		return -EINVAL;
+
+	/* Check whether the property is supported or not */
+	if (!is_extcon_property_supported(id, prop))
+		return -EINVAL;
+
+	/* Find the cable index of external connector by using id */
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	spin_lock_irqsave(&edev->lock, flags);
+
+	/* Check whether the property is available or not. */
+	if (!is_extcon_property_capability(edev, id, index, prop)) {
+		spin_unlock_irqrestore(&edev->lock, flags);
+		return -EPERM;
+	}
+
+	cable = &edev->cables[index];
+
+	/* Set the property value according to extcon type */
+	switch (prop) {
+	case EXTCON_PROP_USB_MIN ... EXTCON_PROP_USB_MAX:
+		cable->usb_propval[prop - EXTCON_PROP_USB_MIN] = prop_val;
+		break;
+	case EXTCON_PROP_CHG_MIN ... EXTCON_PROP_CHG_MAX:
+		cable->chg_propval[prop - EXTCON_PROP_CHG_MIN] = prop_val;
+		break;
+	case EXTCON_PROP_JACK_MIN ... EXTCON_PROP_JACK_MAX:
+		cable->jack_propval[prop - EXTCON_PROP_JACK_MIN] = prop_val;
+		break;
+	case EXTCON_PROP_DISP_MIN ... EXTCON_PROP_DISP_MAX:
+		cable->disp_propval[prop - EXTCON_PROP_DISP_MIN] = prop_val;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock_irqrestore(&edev->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(extcon_set_property);
+
+/**
+ * extcon_set_property_sync() - Set the property value of a specific cable
+			with a notification.
+ * @prop_val:		the pointer including the new value of property.
+ *
+ * When setting the property value of external connector, the external connector
+ * should be attached. The each property should be included in the list of
+ * supported properties according to the type of external connectors.
+ *
+ * Returns 0 if success or error number if fail
+ */
+int extcon_set_property_sync(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value prop_val)
+{
+	int ret;
+
+	ret = extcon_set_property(edev, id, prop, prop_val);
+	if (ret < 0)
+		return ret;
+
+	return extcon_sync(edev, id);
+}
+EXPORT_SYMBOL_GPL(extcon_set_property_sync);
+
+/**
+ * extcon_get_property_capability() - Get the capability of property
+ *			of an external connector.
+ * @edev:		the extcon device that has the cable.
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @prop:		the property id among enum extcon_property.
+ *
+ * Returns 1 if the property is available or 0 if not available.
+ */
+int extcon_get_property_capability(struct extcon_dev *edev, unsigned int id,
+					unsigned int prop)
+{
 	int index;
 
 	if (!edev)
 		return -EINVAL;
 
+	/* Check whether the property is supported or not */
+	if (!is_extcon_property_supported(id, prop))
+		return -EINVAL;
+
+	/* Find the cable index of external connector by using id */
 	index = find_cable_index_by_id(edev, id);
 	if (index < 0)
 		return index;
 
-	if (edev->max_supported && edev->max_supported <= index)
+	return is_extcon_property_capability(edev, id, index, prop);
+}
+EXPORT_SYMBOL_GPL(extcon_get_property_capability);
+
+/**
+ * extcon_set_property_capability() - Set the capability of a property
+ *			of an external connector.
+ * @edev:		the extcon device that has the cable.
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @prop:		the property id among enum extcon_property.
+ *
+ * This function set the capability of a property for an external connector
+ * to mark the bit in capability bitmap which mean the available state of
+ * a property.
+ *
+ * Returns 0 if success or error number if fail
+ */
+int extcon_set_property_capability(struct extcon_dev *edev, unsigned int id,
+					unsigned int prop)
+{
+	struct extcon_cable *cable;
+	int index, type, ret = 0;
+
+	if (!edev)
 		return -EINVAL;
 
-	state = cable_state ? (1 << index) : 0;
-	return extcon_update_state(edev, 1 << index, state);
+	/* Check whether the property is supported or not. */
+	if (!is_extcon_property_supported(id, prop))
+		return -EINVAL;
+
+	/* Find the cable index of external connector by using id. */
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	type = get_extcon_type(prop);
+	if (type < 0)
+		return type;
+
+	cable = &edev->cables[index];
+
+	switch (type) {
+	case EXTCON_TYPE_USB:
+		__set_bit(prop - EXTCON_PROP_USB_MIN, cable->usb_bits);
+		break;
+	case EXTCON_TYPE_CHG:
+		__set_bit(prop - EXTCON_PROP_CHG_MIN, cable->chg_bits);
+		break;
+	case EXTCON_TYPE_JACK:
+		__set_bit(prop - EXTCON_PROP_JACK_MIN, cable->jack_bits);
+		break;
+	case EXTCON_TYPE_DISP:
+		__set_bit(prop - EXTCON_PROP_DISP_MIN, cable->disp_bits);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
 }
-EXPORT_SYMBOL_GPL(extcon_set_cable_state_);
+EXPORT_SYMBOL_GPL(extcon_set_property_capability);
 
 /**
  * extcon_get_extcon_dev() - Get the extcon device instance from the name
@@ -428,7 +904,7 @@ int extcon_register_notifier(struct extcon_dev *edev, unsigned int id,
 			     struct notifier_block *nb)
 {
 	unsigned long flags;
-	int ret, idx;
+	int ret, idx = -EINVAL;
 
 	if (!nb)
 		return -EINVAL;
@@ -846,13 +1322,13 @@ struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
 		return ERR_PTR(-EINVAL);
 
 	if (!dev->of_node) {
-		dev_err(dev, "device does not have a device node entry\n");
+		dev_dbg(dev, "device does not have a device node entry\n");
 		return ERR_PTR(-EINVAL);
 	}
 
 	node = of_parse_phandle(dev->of_node, "extcon", index);
 	if (!node) {
-		dev_err(dev, "failed to get phandle in %s node\n",
+		dev_dbg(dev, "failed to get phandle in %s node\n",
 			dev->of_node->full_name);
 		return ERR_PTR(-ENODEV);
 	}

include/linux/extcon.h

@@ -28,6 +28,15 @@
 
 #include <linux/device.h>
 
+/*
+ * Define the type of supported external connectors
+ */
+#define EXTCON_TYPE_USB		BIT(0)	/* USB connector */
+#define EXTCON_TYPE_CHG		BIT(1)	/* Charger connector */
+#define EXTCON_TYPE_JACK	BIT(2)	/* Jack connector */
+#define EXTCON_TYPE_DISP	BIT(3)	/* Display connector */
+#define EXTCON_TYPE_MISC	BIT(4)	/* Miscellaneous connector */
+
 /*
  * Define the unique id of supported external connectors
  */
@@ -44,6 +53,7 @@
 #define EXTCON_CHG_USB_ACA	8	/* Accessory Charger Adapter */
 #define EXTCON_CHG_USB_FAST	9
 #define EXTCON_CHG_USB_SLOW	10
+#define EXTCON_CHG_WPT		11	/* Wireless Power Transfer */
 
 /* Jack external connector */
 #define EXTCON_JACK_MICROPHONE	20
@@ -60,6 +70,8 @@
 #define EXTCON_DISP_MHL		41	/* Mobile High-Definition Link */
 #define EXTCON_DISP_DVI		42	/* Digital Visual Interface */
 #define EXTCON_DISP_VGA		43	/* Video Graphics Array */
+#define EXTCON_DISP_DP		44	/* Display Port */
+#define EXTCON_DISP_HMD		45	/* Head-Mounted Display */
 
 /* Miscellaneous external connector */
 #define EXTCON_DOCK		60
@@ -68,6 +80,74 @@
 
 #define EXTCON_NUM		63
 
+/*
+ * Define the property of supported external connectors.
+ *
+ * When adding the new extcon property, they *must* have
+ * the type/value/default information. Also, you *have to*
+ * modify the EXTCON_PROP_[type]_START/END definitions
+ * which mean the range of the supported properties
+ * for each extcon type.
+ *
+ * The naming style of property
+ * : EXTCON_PROP_[type]_[property name]
+ *
+ * EXTCON_PROP_USB_[property name]	: USB property
+ * EXTCON_PROP_CHG_[property name]	: Charger property
+ * EXTCON_PROP_JACK_[property name]	: Jack property
+ * EXTCON_PROP_DISP_[property name]	: Display property
+ */
+
+/*
+ * Properties of EXTCON_TYPE_USB.
+ *
+ * - EXTCON_PROP_USB_VBUS
+ * @type:	integer (intval)
+ * @value:	0 (low) or 1 (high)
+ * @default:	0 (low)
+ * - EXTCON_PROP_USB_TYPEC_POLARITY
+ * @type:	integer (intval)
+ * @value:	0 (normal) or 1 (flip)
+ * @default:	0 (normal)
+ * - EXTCON_PROP_USB_SS (SuperSpeed)
+ * @type:       integer (intval)
+ * @value:      0 (USB/USB2) or 1 (USB3)
+ * @default:    0 (USB/USB2)
+ *
+ */
+#define EXTCON_PROP_USB_VBUS		0
+#define EXTCON_PROP_USB_TYPEC_POLARITY	1
+#define EXTCON_PROP_USB_SS		2
+
+#define EXTCON_PROP_USB_MIN		0
+#define EXTCON_PROP_USB_MAX		2
+#define EXTCON_PROP_USB_CNT	(EXTCON_PROP_USB_MAX - EXTCON_PROP_USB_MIN + 1)
+
+/* Properties of EXTCON_TYPE_CHG. */
+#define EXTCON_PROP_CHG_MIN		50
+#define EXTCON_PROP_CHG_MAX		50
+#define EXTCON_PROP_CHG_CNT	(EXTCON_PROP_CHG_MAX - EXTCON_PROP_CHG_MIN + 1)
+
+/* Properties of EXTCON_TYPE_JACK. */
+#define EXTCON_PROP_JACK_MIN		100
+#define EXTCON_PROP_JACK_MAX		100
+#define EXTCON_PROP_JACK_CNT (EXTCON_PROP_JACK_MAX - EXTCON_PROP_JACK_MIN + 1)
+
+/* Properties of EXTCON_TYPE_DISP. */
+#define EXTCON_PROP_DISP_MIN		150
+#define EXTCON_PROP_DISP_MAX		150
+#define EXTCON_PROP_DISP_CNT (EXTCON_PROP_DISP_MAX - EXTCON_PROP_DISP_MIN + 1)
+
+/*
+ * Define the type of property's value.
+ *
+ * Define the property's value as union type. Because each property
+ * would need the different data type to store it.
+ */
+union extcon_property_value {
+	int intval;	/* type : integer (intval) */
+};
+
 struct extcon_cable;
 
 /**
@@ -150,26 +230,43 @@ extern struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
 extern void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev);
 
 /*
- * get/set/update_state access the 32b encoded state value, which represents
- * states of all possible cables of the multistate port. For example, if one
- * calls extcon_set_state(edev, 0x7), it may mean that all the three cables
- * are attached to the port.
+ * get/set_state access each bit of the 32b encoded state value.
+ * They are used to access the status of each cable based on the cable id.
  */
-static inline u32 extcon_get_state(struct extcon_dev *edev)
-{
-	return edev->state;
-}
+extern int extcon_get_state(struct extcon_dev *edev, unsigned int id);
+extern int extcon_set_state(struct extcon_dev *edev, unsigned int id,
+				   bool cable_state);
+extern int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
+				bool cable_state);
+
+/*
+ * Synchronize the state and property data for a specific external connector.
+ */
+extern int extcon_sync(struct extcon_dev *edev, unsigned int id);
 
-extern int extcon_set_state(struct extcon_dev *edev, u32 state);
-extern int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state);
+/*
+ * get/set_property access the property value of each external connector.
+ * They are used to access the property of each cable based on the property id.
+ */
+extern int extcon_get_property(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value *prop_val);
+extern int extcon_set_property(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value prop_val);
+extern int extcon_set_property_sync(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value prop_val);
 
 /*
- * get/set_cable_state access each bit of the 32b encoded state value.
- * They are used to access the status of each cable based on the cable id.
+ * get/set_property_capability set the capability of the property for each
+ * external connector. They are used to set the capability of the property
+ * of each external connector based on the id and property.
  */
-extern int extcon_get_cable_state_(struct extcon_dev *edev, unsigned int id);
-extern int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
-				   bool cable_state);
+extern int extcon_get_property_capability(struct extcon_dev *edev,
+				unsigned int id, unsigned int prop);
+extern int extcon_set_property_capability(struct extcon_dev *edev,
+				unsigned int id, unsigned int prop);
 
 /*
  * Following APIs are to monitor every action of a notifier.
@@ -232,30 +329,57 @@ static inline struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
 
 static inline void devm_extcon_dev_free(struct extcon_dev *edev) { }
 
-static inline u32 extcon_get_state(struct extcon_dev *edev)
+
+static inline int extcon_get_state(struct extcon_dev *edev, unsigned int id)
+{
+	return 0;
+}
+
+static inline int extcon_set_state(struct extcon_dev *edev, unsigned int id,
+				bool cable_state)
+{
+	return 0;
+}
+
+static inline int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
+				bool cable_state)
 {
 	return 0;
 }
 
-static inline int extcon_set_state(struct extcon_dev *edev, u32 state)
+static inline int extcon_sync(struct extcon_dev *edev, unsigned int id)
+{
+	return 0;
+}
+
+static inline int extcon_get_property(struct extcon_dev *edev, unsigned int id,
+					unsigned int prop,
+					union extcon_property_value *prop_val)
+{
+	return 0;
+}
+static inline int extcon_set_property(struct extcon_dev *edev, unsigned int id,
+					unsigned int prop,
+					union extcon_property_value prop_val)
 {
 	return 0;
 }
 
-static inline int extcon_update_state(struct extcon_dev *edev, u32 mask,
-				       u32 state)
+static inline int extcon_set_property_sync(struct extcon_dev *edev,
+					unsigned int id, unsigned int prop,
+					union extcon_property_value prop_val)
 {
 	return 0;
 }
 
-static inline int extcon_get_cable_state_(struct extcon_dev *edev,
-					  unsigned int id)
+static inline int extcon_get_property_capability(struct extcon_dev *edev,
+					unsigned int id, unsigned int prop)
 {
 	return 0;
 }
 
-static inline int extcon_set_cable_state_(struct extcon_dev *edev,
-					  unsigned int id, bool cable_state)
+static inline int extcon_set_property_capability(struct extcon_dev *edev,
+					unsigned int id, unsigned int prop)
 {
 	return 0;
 }
@@ -320,4 +444,15 @@ static inline int extcon_unregister_interest(struct extcon_specific_cable_nb
 {
 	return -EINVAL;
 }
+
+static inline int extcon_get_cable_state_(struct extcon_dev *edev, unsigned int id)
+{
+	return extcon_get_state(edev, id);
+}
+
+static inline int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
+				   bool cable_state)
+{
+	return extcon_set_state_sync(edev, id, cable_state);
+}
 #endif /* __LINUX_EXTCON_H__ */

include/linux/extcon/extcon-adc-jack.h

@@ -20,8 +20,8 @@
 
 /**
  * struct adc_jack_cond - condition to use an extcon state
- * @state:		the corresponding extcon state (if 0, this struct
  *			denotes the last adc_jack_cond element among the array)
+ * @id:			the unique id of each external connector
  * @min_adc:		min adc value for this condition
  * @max_adc:		max adc value for this condition
  *
@@ -33,7 +33,7 @@
  * because when no adc_jack_cond is met, state = 0 is automatically chosen.
  */
 struct adc_jack_cond {
-	u32 state;	/* extcon state value. 0 if invalid */
+	unsigned int id;
 	u32 min_adc;
 	u32 max_adc;
 };